Database Info

Messed up flashing

I was attempting to flash back to stock (2.2) using odin3 1.85 but I messed up and now my phone goes to the phone yield PC screen.
I can get into download mode, but odin one click doesn't do anything besides "<OSM> All threads completed. (succeed 0 / failed 0)" after clicking start. All the boxes are blank though..
Am I completely screwed here?

As long as you can get into download mode, you are not completely screwed. Open up odin 1 click first and then plug it in. I would use a different USB port. I screwed up once by placing and flashing an infuse rom on a captivate but odin 1 click to jf6 worked for me. Another time I got that phone yield computer screen too, created a jig and flashed to jf6, master clear and reflashed.

Ok, I've been reading over various threads and a lot of them say they have to keep trying to get it to work so I guess I'll keep doing that.
Thanks for the reply, makes me feel better
And I fixed it

RandomZero said:
Ok, I've been reading over various threads and a lot of them say they have to keep trying to get it to work so I guess I'll keep doing that.
Thanks for the reply, makes me feel better
And I fixed it
Click to expand...
Click to collapse
once upon a time I flashed t mobile vibrant firmware onto a bell vibrant. instant gg, cst me 100$ at the local phone store to fix. ha ha

Messed up flashing .. cannot get to download
I have a similar and may be a worse problem.
I started out with a perfectly fine factory installed Captivate Froyo 2.2 UCKB2.
I tried flashing using Adam Outler's Heimdal install for Gingerbread 2.3.4.(UCKH3).
(http://forum.xda-developers.com/showthread.php?t=1238093)
Everything was fine until I actually started the flash .. it went on to copy the pit file but spat out an error Loading the Kernel. And now I have a Phone--!--PC no matter what I do.
I tried the button combo, the button+USB combo, the button+usb+battery combo, the adb reboot download thing, but to no avail.
Have not tried any of the "Jigs" yet. Nor have tried the Unbrickable Mod (skilled soldering on the board is a little too much for me). Don't want to deal in hardware unless absolutely necessary.
Any help in getting me to download mode is really appreciated.
EDIT:
WOW ... I was never able to get into a download mode, I connected the phone to the PC with the right drivers, ODIN3 was able to detect the device, Hiemdall was also able to detect the device connected, so I went on to flash the phone with Hiemdall (even though it was not in the download mode [still showed phone--!--pc] ) AND IT WORKED ... I WAS ABLE TO FLASH SUCCESSFULLY .. I am on Gingerbread 2.3.4 now ... !! Flashed without the bootloaders ! Thought I should share it with all ... !!

ptera said:
I have a similar and may be a worse problem.
I started out with a perfectly fine factory installed Captivate Froyo 2.2 UCKB2.
I tried flashing using Adam Outler's Heimdal install for Gingerbread 2.3.4.(UCKH3).
(http://forum.xda-developers.com/showthread.php?t=1238093)
Everything was fine until I actually started the flash .. it went on to copy the pit file but spat out an error Loading the Kernel. And now I have a Phone--!--PC no matter what I do.
I tried the button combo, the button+USB combo, the button+usb+battery combo, the adb reboot download thing, but to no avail.
Have not tried any of the "Jigs" yet. Nor have tried the Unbrickable Mod (skilled soldering on the board is a little too much for me). Don't want to deal in hardware unless absolutely necessary.
Any help in getting me to download mode is really appreciated.
Click to expand...
Click to collapse
The phone--!--PC screen is (in a sense) download mode. Just try flashing again from that screen.

Thank you JMTheiss
jmtheiss said:
The phone--!--PC screen is (in a sense) download mode. Just try flashing again from that screen.
Click to expand...
Click to collapse
I did just that and it worked great... Thanks .. although I did it before I saw your post.. I tried it out since ODIN3 and Hiemdall were both "seeing" the device connected and I thought it was worth a shot.
Thank you for the comment though, I would have definitely returned here had it not occurred to me.

Getting Rainbow screen on every boot and when trying to get to recovery mode

Getting Rainbow screen on every boot and when trying to get to recovery mode
For some reason I cannot get my computer to detect my device thus I can not even get into download mode. when I launch Odin and and not able to access my SD. I am at a lost here since now I cannot flash nor can I odin to get back to stock can anyone help here? I think I have tried everything I can find.
I just recently flashed octane 2.x per the instructions under development

rozzko said:
Getting Rainbow screen on every boot and when trying to get to recovery mode
For some reason I cannot get my computer to detect my device thus I can not even get into download mode. when I launch Odin and and not able to access my SD. I am at a lost here since now I cannot flash nor can I odin to get back to stock can anyone help here? I think I have tried everything I can find.
I just recently flashed octane 2.x per the instructions under development
Click to expand...
Click to collapse
If you came from Froyo, follow this guide: http://forum.xda-developers.com/showthread.php?p=16762954
Hope this helps.
sent from my CommandCenter using xda premium

sounds like the bootloader.
flash a froyo rom, then try to odin. AFTER you have tried installing the drivers linked in the previous post. That guide should work.

Did you get this fixed?
Sent from my SGH-T959V using xda premium

I bought a Jig an can get into download mode but still cant get into recover (because of the rainbow screen) and i cannot get my computer to recognize my my phone either via sd or via odin or i think i could solve this.
thanks in advance

I bought a Jig an can get into download mode but still cant get into recover (because of the rainbow screen) and i cannot get my computer to recognize my my phone either via sd or via odin or i think i could solve this.
thanks in advance
Click to expand...
Click to collapse
Go into the control panel & uninstall the USB drivers & kies mini if installed. Then reinstall Kies Mini & use the menu option to reinstall the drivers. See if that helps.
Sent from my SGH-T959V using XDA App

I re installed drivers several times and used a different machine. I feel like I am stuck and there might now be a solution to this except toss the phone in the ocean!

rozzko said:
I re installed drivers several times and used a different machine. I feel like I am stuck and there might now be a solution to this except toss the phone in the ocean!
Click to expand...
Click to collapse
Could it be the cable you're using? I've seen quite a few posts here about people using cables that were bad and/or too long and it prevented the phone from being recognized via USB. People could charge the phone but not use ODIN or anything.
Do you have a different cable to try?

ive tried two different cables, i could try another one thats a good idea. somehow i think maybe i messed up the mounting, i thought i followed the instructions to a t. UMMU .. i will try a few different cables when i get home tonight... actually just tried at work no dice, my system storage is also only showing 126 MB

rozzko said:
ive tried two different cables, i could try another one thats a good idea. somehow i think maybe i messed up the mounting, i thought i followed the instructions to a t. UMMU .. i will try a few different cables when i get home tonight... actually just tried at work no dice, my system storage is also only showing 126 MB
Click to expand...
Click to collapse
I thought the phone did not boot up. How are you seeing how much storage you have left?
I'm curious to know what state it really is in. There has to be a way to get it going for you.

the phone boots fine during the boot after the initial boot screen where it says galaxy s 4g it goes into rainbow patterns. so every time i try to get into recovery when I am in the recovery menu (or into where the recovery menu should be) i cannot see anything because of the rainbow screen. I was told maybe i have the wrong boot loaders installed.
because i cant see recovery and I cannot get my computer to see my phone I have no idea what to do get my phone back to stock to start over.
This is why I am stuck.
If i could get my computer to see the phone I think i could odin back to stock, using the dongle is half the battle as i can get in recovery

rozzko said:
the phone boots fine during the boot after the initial boot screen where it says galaxy s 4g it goes into rainbow patterns. so every time i try to get into recovery when I am in the recovery menu (or into where the recovery menu should be) i cannot see anything because of the rainbow screen. I was told maybe i have the wrong boot loaders installed.
because i cant see recovery and I cannot get my computer to see my phone I have no idea what to do get my phone back to stock to start over.
This is why I am stuck.
If i could get my computer to see the phone I think i could odin back to stock, using the dongle is half the battle as i can get in recovery
Click to expand...
Click to collapse
Pardon me if I'm not getting it....but yo said it boots fine but then you get the rainbow screen when the Galaxy S 4G logo should appear? The rainbow screen is definitely a boot loader issue. I'm just trying to figure out a way to either get you into a download mode where the phone is recognized or into recovery so you can get it going again.
How are you getting it into recovery mode?
I'm wondering if Heimdall would be your best bet? You could try to download it from here, extract it somewhere, then go into the Drivers folder and double-click zadig.exe. Select Options from the menu bar, select List All Devics then select Samsung Android Composite (something along those lines), then click Install Driver. This is a different driver than the one that comes from Samsung.
After that, maybe try Bhundven's [Heimdall][One-Click][UVKJ6] The KJ6 Heimdall One-Click Collection [12/11/2011]. Select whichever one-click file you want to go for and follow his instructions. They all have the GB bootloaders in them, so you should be set.

Usually both volume buttons power button for a few secs or through rom mgr

rozzko said:
Usually both volume buttons power button for a few secs or through rom mgr
Click to expand...
Click to collapse
From what I've read ROM Manager is a no-no on this model phone. I dunno why, but I've read that on a few threads.
Let me know if you're able to install Heimdall and the open source drivers that come with it. If you can, you can get into download mode, and it sees the phone, then you can try the One Clicks or even just flash the boot loaders from a ROM that contains them.

I will try when i go home tonight.
just an fyi every time i plug in my phone, it does not show up on my computer. i have tried using debugging mode and mass storage and neither work.

rozzko said:
I will try when i go home tonight.
just an fyi every time i plug in my phone, it does not show up on my computer. i have tried using debugging mode and mass storage and neither work.
Click to expand...
Click to collapse
Ugh...well let's hope for the best. I would uninstall any drivers and programs like Kies you have installed first, then install the Heimdall drivers. Let me know how it goes.

so i uninstalled drivers executed Heimdall and put phone in download mode with dongle. the computer still did not detect phone, however i got my replacement SGS4 today put it in download mode and it was detected immediately.
I dont know what else I can do do get the phone detected or fix the boot loader to get into recovery

rozzko said:
I will try when i go home tonight.
just an fyi every time i plug in my phone, it does not show up on my computer. i have tried using debugging mode and mass storage and neither work.
Click to expand...
Click to collapse
Maybe I'm missing something. How are you switching between debugging mode and mass media if you can't boot the phone?
The way I understood the problem, you would get to the SgS logo screen during boot, then the whole screen would be covered by the rainbow effect, which renders the screen unreadable, nd thus the phone unusable. Is that correct, or is the problem different?

the rainbow screen happens right after the SGS Logo then fades out once the lock screen comes on.
it also shows up once I try to get into recovery but from that point I cannot see anything and have to reboot.
Phone works after fully booted
both debugging and mass storage have been tried

You need to flash the "GINGERBREAD" bootloaders. This issue is 100% caused by froyo bootloaders. Once you obtain the GINGERBREAD bootloader, there is a 100% chance that the issue will go away. Flash THISTHIS/download. in heimdall. Get into recovery, then flash a rom of your choice.

[Q] Can Someone Help? I'm Stuck In Recovery<3e>

​I hope there is a way for me to fix this. I am a noob but, I have been successful flashing things a few times in the past (and not so lucky a few times). This time I had flashed my Infuse back to stock 2.2 Froyo UCKD5 after having Zues w/ Aries HellFire running for a couple weeks. I decided to try another ROM because I was bored. Then I screwed something up thinking I knew more than I do. As I was trying to clean things up in my files to get ready to do a back-up,something happened and about half of my apps,factory and 3rd party had no files or ?? They didn't show any MB in cache / data,in TIBU or App Mgr, only "computing...", and obviously things didn't work right. So I hit the phone's Factory Reset,went into Odin3 thinking I would try doing something I never tried before,stupid me, and installed through the PDA button, zimage root tar file, success, saw the Fugu fish and then reset Odin, turned off/ on. Pulled battery from phone, usb jig to download mode, because three button method wasn't working. I thought it had something to do with the residual kernel or bootloader from Zeus. The kernel that was running is 2.6.32.9 and I don't know what that is. Any way I thought I would install KF1 .tar Odin3 installed it but it got stuck on the Samsung power-up screen,black background white Samsung letters. I usb jigged into download mode , thinking maybe I had the wrong drivers possibly and did the Heimdall Zadig driver install, nothing changed. So, I thought that I better just reflash to stock using GTG's Ultimate Unbrick, used the UCKD5 tar and it passed. Then I unplugged the phone when it shut off to reboot, it booted into blue recovery and I hit reboot and it came right back into blue recovery. I am able to get into download mode or into the ever looping blue recovery<3e>,but nothing else. No programs,Odin, Kies, Heimdall,GTG's, recognize the phone,the laptop does and says the device may not work correctly..., but I did notice what the fails were in the recovery boot-up. So I snapped pics with my Captivate and uploaded them and I will paste them here (I think XDA lets idiots like me paste in this area?). they are readable, but if I need to type everything out I can, but not until someone asks so as to keep this already lengthy story a bit shorter. Thanks in advance,KK13/khkaiser13. sent in using my Rooted Captivate on APEX12 through XDAPremium View attachment 899419
View attachment 899420

Did you try clicking flash in Heimdall, sometimes it looks like it doesn't see the phone, but you click flash and it works. Also, have you tried clearing user data and cache? (I know you said you had factory reset at one point but now that you are stuck might be worth a try.) Looks like a boot loader issue, not sure why Heimdall doesn't see the phone, I've had good luck in the past with it.
I'm tempted to tell you to format the internal sd and try heimdall again, but maybe someone with more experience would have a better idea.

khkaiser13 said:
​I hope there is a way for me to fix this. I am a noob but, I have been successful flashing things a few times in the past (and not so lucky a few times). This time I had flashed my Infuse back to stock 2.2 Froyo UCKD5 after having Zues w/ Aries HellFire running for a couple weeks. I decided to try another ROM because I was bored. Then I screwed something up thinking I knew more than I do. As I was trying to clean things up in my files to get ready to do a back-up,something happened and about half of my apps,factory and 3rd party had no files or ?? They didn't show any MB in cache / data,in TIBU or App Mgr, only "computing...", and obviously things didn't work right. So I hit the phone's Factory Reset,went into Odin3 thinking I would try doing something I never tried before,stupid me, and installed through the PDA button, zimage root tar file, success, saw the Fugu fish and then reset Odin, turned off/ on. Pulled battery from phone, usb jig to download mode, because three button method wasn't working. I thought it had something to do with the residual kernel or bootloader from Zeus. The kernel that was running is 2.6.32.9 and I don't know what that is. Any way I thought I would install KF1 .tar Odin3 installed it but it got stuck on the Samsung power-up screen,black background white Samsung letters. I usb jigged into download mode , thinking maybe I had the wrong drivers possibly and did the Heimdall Zadig driver install, nothing changed. So, I thought that I better just reflash to stock using GTG's Ultimate Unbrick, used the UCKD5 tar and it passed. Then I unplugged the phone when it shut off to reboot, it booted into blue recovery and I hit reboot and it came right back into blue recovery. I am able to get into download mode or into the ever looping blue recovery<3e>,but nothing else. No programs,Odin, Kies, Heimdall,GTG's, recognize the phone,the laptop does and says the device may not work correctly..., but I did notice what the fails were in the recovery boot-up. So I snapped pics with my Captivate and uploaded them and I will paste them here (I think XDA lets idiots like me paste in this area?). they are readable, but if I need to type everything out I can, but not until someone asks so as to keep this already lengthy story a bit shorter. Thanks in advance,KK13/khkaiser13. sent in using my Rooted Captivate on APEX12 through XDAPremium View attachment 899419
View attachment 899420
Click to expand...
Click to collapse
Before you go any further,
Read my how to..click on the first link on my sigs.
Read through several times.
There is a BIG difference b/t download mode and recovery.

Thanks, I did clear Data/Cache. I also did format the sd as a last resort but, it didn't help. I don't know if you looked at the screenshots I posted but, it says Checksum Fail and Movinand Checksum Fail. I dont know what either of those are but, willing to bet if someone knows it might be repairable. Thanks Again, to both, enochpc and qkster for the helpful info which I did not know before. khkaiser13/ kk13

khkaiser13 said:
Thanks, I did clear Data/Cache. I also did format the sd as a last resort but, it didn't help. I don't know if you looked at the screenshots I posted but, it says Checksum Fail and Movinand Checksum Fail. I dont know what either of those are but, willing to bet if someone knows it might be repairable. Thanks Again, to both, enochpc and qkster for the helpful info which I did not know before. khkaiser13/ kk13
Click to expand...
Click to collapse
Put your phone in download mode. Odin or heimdall back to stock and start over.
Don't worry about anything else as long as you can get into dl mode

Hey, thanks for responding. I know the difference b/t recov. and dload. I am stuck in recovery<3e> blue, it just returns the recovery screen no matter if I press reboot, clear cache, or clear data, or try install zip. But if I usb jig it, it goes into download mode. Thats it. What I have and don't know what or how to fix is during the reboot attempt (you can read it if you click on my screenshots) it says Checksum Fail, Movinand Fail, and lfs undone. I'm gonna try to find out more about those files ( I guess thats what those would be ???) Thanks Bro.

khkaiser13 said:
Hey, thanks for responding. I know the difference b/t recov. and dload. I am stuck in recovery<3e> blue, it just returns the recovery screen no matter if I press reboot, clear cache, or clear data, or try install zip. But if I usb jig it, it goes into download mode. Thats it. What I have and don't know what or how to fix is during the reboot attempt (you can read it if you click on my screenshots) it says Checksum Fail, Movinand Fail, and lfs undone. I'm gonna try to find out more about those files ( I guess thats what those would be ???) Thanks Bro.
Click to expand...
Click to collapse
You borked something in the ROM. That's why it won't boot. Files mismatch and don't add up. That's why you're in blue recovery.
You've to get into dl mode and flash a stock ROM img. Then start over.

qkster said:
You borked something in the ROM. That's why it won't boot. Files mismatch and don't add up. That's why you're in blue recovery.
You've to get into dl mode and flash a stock ROM img. Then start over.
Click to expand...
Click to collapse
Just to add this to what qkster said! I know you said you know the difference but be sure to have proper drivers installed I personally used GTG’s Ultimate Unbrick with 100% success. If there is any doubt about bad drivers I would also suggest reinstalling them there is a very easy to use Utility called usbdeview that lets you uninstall drivers and start fresh.

[Q] HELP.. soft brick

Samsung Galaxy s 4g T959V-Gingerbread. Rooted it with SuperOneClick... Didnt have CWM. when I tried to install Black Ice and ICNINB. Tried doing with Rom Manager. Then read that doesn't work with this phone. Was able to flash AltonX KJ6 kernal through SGS kernel flasher in order or get CWM on the phone. That worked. But when I went to flash the zip files for the roms again. They still didn't work. I thought I was following the directions. Get into download mode> create a backup> wipe data> make sure the mounts were right> then flash the zip file. Well the first time I did i,t it kinda went through. Although I didn't have RED CWM or Linda. Wanted to get Voodoo and LagFix. So I decided to flash again. When it came time to reboot.. it got stuck in a loop between two different Samsung screens.One with a big swoopy S the other just the normalt-mobile samsung screen before it boots up. Going from one to the other never really rebooting. So again I decided to get into download mode again and then flash a recovery backup file. And NOW it just hangs on the Samsung T-Moblie screen. I've tried battery pulls also tried using a JIG. Screen pops up but just freezes there.
Any suggestions??

pistol865 said:
Samsung Galaxy s 4g T959V-Gingerbread. Rooted it with SuperOneClick... Didnt have CWM. when I tried to install Black Ice and ICNINB. Tried doing with Rom Manager. Then read that doesn't work with this phone. Was able to flash AltonX KJ6 kernal through SGS kernel flasher in order or get CWM on the phone. That worked. But when I went to flash the zip files for the roms again. They still didn't work. I thought I was following the directions. Get into download mode> create a backup> wipe data> make sure the mounts were right> then flash the zip file. Well the first time I did i,t it kinda went through. Although I didn't have RED CWM or Linda. Wanted to get Voodoo and LagFix. So I decided to flash again. When it came time to reboot.. it got stuck in a loop between two different Samsung screens.One with a big swoopy S the other just the normalt-mobile samsung screen before it boots up. Going from one to the other never really rebooting. So again I decided to get into download mode again and then flash a recovery backup file. And NOW it just hangs on the Samsung T-Moblie screen. I've tried battery pulls also tried using a JIG. Screen pops up but just freezes there.
Any suggestions??
Click to expand...
Click to collapse
you don't want voodoo lagfix. unreliable, imho.
Try eollie's stock + root in the second post my oneclick thread. It's a stock rom and blastoff v2.5.
Run the oneclick the first time to flash just the kernel and rom.
Click flash bootloaders.
reboot phone to download mode again
flash again, this time with bootloaders.
After that, you should be golden.
Don't forget to read the directions in the OP.

bhundven said:
you don't want voodoo lagfix. unreliable, imho.
Try eollie's stock + root in the second post my oneclick thread. It's a stock rom and blastoff v2.5.
Run the oneclick the first time to flash just the kernel and rom.
Click flash bootloaders.
reboot phone to download mode again
flash again, this time with bootloaders.
After that, you should be golden.
Don't forget to read the directions in the OP.
Click to expand...
Click to collapse
Thank you so much for getting back to me. A couple of questions if I may?
1) if I'm able to get the samsung screen, does that mean I'm able to get into Download mode? It just seems to hang on that samsung T-Mobile screen.
2) The link to dropbox that I'm supposed too click on, seems to be broken... Stock_KJ6_+_root-One-Click.jar (this has the blastoff v2 kernel)- https://dl.dropboxusercontent.com/u/10373328/Stock KJ6 + root-One-Click.jar -
Here's what comes up: Error (404)
We can't find the page you're looking for. Check out our Help Center and forums for help, or head back to home.
3) Assuming that I'm able to get to download mode, I just want to check to make sure that I'm reading your directions correctly.
- when I run OneClick the 1st time, it will automatically apply just the kernel and rom.
- Then I'm supposed to reboot? Or flash the bootloaders?
- After that I'm supposed to reboot phone to download mode again.
- Flash Bootloaders again??
I'm sure I'm messing up the directions or rather misreading them.
Sorry for that. Kinda NOOB when it comes to HEIDENALL

pistol865 said:
Thank you so much for getting back to me. A couple of questions if I may?
Click to expand...
Click to collapse
Well, seeming it is the Q&A forum
pistol865 said:
1) if I'm able to get the samsung screen, does that mean I'm able to get into Download mode? It just seems to hang on that samsung T-Mobile screen.
Click to expand...
Click to collapse
Yes. Sometimes even if the phone seems to turn on and go to a black screen, you might still be able to get to download mode.
Seriously, this phone is like a tank... unless you flash gt-i9000 or vibrant roms. Then you will brick your phone.
pistol865 said:
2) The link to dropbox that I'm supposed too click on, seems to be broken... Stock_KJ6_+_root-One-Click.jar (this has the blastoff v2 kernel)- https://dl.dropboxusercontent.com/u/10373328/Stock KJ6 + root-One-Click.jar -
Here's what comes up: Error (404)
We can't find the page you're looking for. Check out our Help Center and forums for help, or head back to home.
Click to expand...
Click to collapse
Dang, I'm uploading a new link to this. Give it 20 minutes. and go back and try the link again.
pistol865 said:
3) Assuming that I'm able to get to download mode, I just want to check to make sure that I'm reading your directions correctly.
- when I run OneClick the 1st time, it will automatically apply just the kernel and rom.
- Then I'm supposed to reboot? Or flash the bootloaders?
- After that I'm supposed to reboot phone to download mode again.
- Flash Bootloaders again??
I'm sure I'm messing up the directions or rather misreading them.
Sorry for that. Kinda NOOB when it comes to HEIDENALL
Click to expand...
Click to collapse
Put your phone into download mode, either by holding vol+ and vol- and plugging in the usb from your computer (keep holding vol+ and vol- till you see download mode) or use a jig.
Once your in download mode. Flash the first time. Yes, it will only flash the kernel and rom. The phone will automatically reboot after the flash.
Wait a little bit after the phone reboots, you'll see a little local update happen and reboot the phone again. Then pull the battery and put the phone back into download mode.
Then check the "flash bootloaders" checkbox. flash the oneclick again this time with bootloaders.
After this, you can go anywhere from this rom, except back to froyo. I'm still working on a simple oneclick method for going back to froyo.

bhundven said:
Well, seeming it is the Q&A forum
Yes. Sometimes even if the phone seems to turn on and go to a black screen, you might still be able to get to download mode.
Seriously, this phone is like a tank... unless you flash gt-i9000 or vibrant roms. Then you will brick your phone.
Dang, I'm uploading a new link to this. Give it 20 minutes. and go back and try the link again.
Put your phone into download mode, either by holding vol+ and vol- and plugging in the usb from your computer (keep holding vol+ and vol- till you see download mode) or use a jig.
Once your in download mode. Flash the first time. Yes, it will only flash the kernel and rom. The phone will automatically reboot after the flash.
Wait a little bit after the phone reboots, you'll see a little local update happen and reboot the phone again. Then pull the battery and put the phone back into download mode.
Then check the "flash bootloaders" checkbox. flash the oneclick again this time with bootloaders.
After this, you can go anywhere from this rom, except back to froyo. I'm still working on a simple oneclick method for going back to froyo.
Click to expand...
Click to collapse
Once again, many thanks for your time and patience
.Just wondering if you fixed that link yet?
I keep clicking on: Stock_KJ6_+_root-One-Click.jar (this has the blastoff v2 kernel) , it takes me to this page: https://dl.dropboxusercontent.com/u/10373328/Stock KJ6 + root-One-Click.jar, but I'm still getting the message: Error (404)
We can't find the page you're looking for. Check out our Help Center and forums for help, or head back to home.
That link is Underneath the link: eollie: AntonX's BwaT + Stock Rom... on the page: http://forum.xda-developers.com/showthread.php?t=1358498 .
Again, pardon my detailed reply, but I just want to be sure that I'm clicking on the correct link.

pistol865 said:
Once again, many thanks for your time and patience
.Just wondering if you fixed that link yet?
I keep clicking on: Stock_KJ6_+_root-One-Click.jar (this has the blastoff v2 kernel) , it takes me to this page: https://dl.dropboxusercontent.com/u/10373328/Stock KJ6 + root-One-Click.jar, but I'm still getting the message: Error (404)
We can't find the page you're looking for. Check out our Help Center and forums for help, or head back to home.
That link is Underneath the link: eollie: AntonX's BwaT + Stock Rom... on the page: http://forum.xda-developers.com/showthread.php?t=1358498 .
Again, pardon my detailed reply, but I just want to be sure that I'm clicking on the correct link.
Click to expand...
Click to collapse
Yea man. I updated the second post in the onclick thread. Here is the timestamp from the post: "24th July 2013 12:39 PM"
You need to clear the cache on your browser and reload that page. The link is here.

bhundven said:
Yea man. I updated the second post in the onclick thread. Here is the timestamp from the post: "24th July 2013 12:39 PM"
You need to clear the cache on your browser and reload that page. The link is here.
Click to expand...
Click to collapse
Ran into a new problem now...
It's me again... Sorry if I'm being a pain..
So I downloaded the link.. I have it on my desktop...I put my phone into download mode..(Yellow Triangle> Do not unplug).. I clicked on your OneClick... it loads but then tells me to connect my device... It keeps telling me I'm disconnected..
When I plug my phone into my compt via USB.. it now tells me that my device is unrecognized.
Now what did I do wrong?
I was hoping I was close to a resolution... another roadblock.
Can I fix it?
Once again, thank you for any and all the help and advice you have given me.

There is s thread called fresh out of the box now what. It will help you immensely. Sounds like you need to uninstall all samsung and android drivers and reinstall them. In that thread there is a application for your computer called usbview that can remove them (I probably misspelled that apps name). The thread is by lumin30.

limeaide said:
There is s thread called fresh out of the box now what. It will help you immensely. Sounds like you need to uninstall all samsung and android drivers and reinstall them. In that thread there is a application for your computer called usbview that can remove them (I probably misspelled that apps name). The thread is by lumin30.
Click to expand...
Click to collapse
I already installed usbDview.. ran as admisistrator... removed anything that said samsung or android.. plugged in my samsung phone and Still is not recognized. Also downloaded Zadig.. to install the drivers to the phone.. but it doesn't recognize the phone.
Anything else that I'm missing? Can I download something online so that when i plug in via USB it will recognize my phone?

You have tried different usb ports too? Other than that maybe a different computer. I know bhundven says dont use front usb ports too.

limeaide said:
You have tried different usb ports too? Other than that maybe a different computer. I know bhundven says dont use front usb ports too.
Click to expand...
Click to collapse
Tried different usb ports as well as a different computer.. When I hoked up to a different computer, at first it said it was installing the drivers.. then it stopped and said USB device Unrecognized.
Is it a matter of drivers? Can I get them offline? and then plug in my phone?

limeaide said:
You have tried different usb ports too? Other than that maybe a different computer. I know bhundven says dont use front usb ports too.
Click to expand...
Click to collapse
Computer pop up says: usb device has malfunctioned and windows does not recognize it.

limeaide said:
You have tried different usb ports too? Other than that maybe a different computer. I know bhundven says dont use front usb ports too.
Click to expand...
Click to collapse
I just went to the samsung website and downloaded the drivers from there.. Still having the same problem... usb device has malfunctioned and windows does not recognize it.

IIRC when you plug the phone in you need to stop it from installing the samsung drivers. Then use zadig to install them like illustrated in lumin30s guide.
Be sure to use a rear usb port if on a desktop. Dont change ports if things start to work. If you have to use a different port I suggest using usbdeview to remove drivers each time. It seems like overkill but it might work.

limeaide said:
IIRC when you plug the phone in you need to stop it from installing the samsung drivers. Then use zadig to install them like illustrated in lumin30s guide.
Be sure to use a rear usb port if on a desktop. Dont change ports if things start to work. If you have to use a different port I suggest using usbdeview to remove drivers each time. It seems like overkill but it might work.
Click to expand...
Click to collapse
ALMOST THERE.. I think..lol
I think I successfully ran the program.. phone turns on now.. Yayyy...
New Problem:
The screen now says:NO SIM CARD IN PHONE
AFTER YOU INSERT THE CARD, PLEASE REBOOT
EMERGENCY CALLS CAN BE USED
The SIM card is already installed... the phone is not recognizing it now.
What now??

limeaide said:
IIRC when you plug the phone in you need to stop it from installing the samsung drivers. Then use zadig to install them like illustrated in lumin30s guide.
Be sure to use a rear usb port if on a desktop. Dont change ports if things start to work. If you have to use a different port I suggest using usbdeview to remove drivers each time. It seems like overkill but it might work.
Click to expand...
Click to collapse
One more thing, I installed Stock_KJ6_+_root-One-Click.jar (this has the blastoff v2 kernel)... That should mean the phone is rooted.. correct? although I don't see SUPERUSER in my apps list.. Also does this have CWM installed? Can I flash a custom rom moving forward?? If so which one do you consider the best? I originally was having trouble because I was running into low internal memory and couldn't download many apps. That's why I wanted to flash BLACK ICE originally.. I thought that would fix my problem..

This phone suffers from low internal memory. However you can move almost all apps to your sdcard from within the rom. If the things that do not work on the JB roms are ok with you I hear good things about those.
As for the sim card..Im not sure. The one click you used doesnt have SU included because it is a stock rom with custom rooted kernel. You would have to install it from the Play store. But I reccomend flashing a different rom anyway. Again the JB roms seem to be pretty awesome so that is a option.

limeaide said:
This phone suffers from low internal memory. However you can move almost all apps to your sdcard from within the rom. If the things that do not work on the JB roms are ok with you I hear good things about those.
As for the sim card..Im not sure. The one click you used doesnt have SU included because it is a stock rom with custom rooted kernel. You would have to install it from the Play store. But I reccomend flashing a different rom anyway. Again the JB roms seem to be pretty awesome so that is a option.
Click to expand...
Click to collapse
Did I do something wrong because I didn't pull the sim card when I flashed: Stock_KJ6_+_root-One-Click.jar (this has the blastoff v2 kernel). Also does Stock_KJ6_+_root-One-Click.jar (this has the blastoff v2 kernel) come with CWM Red?

pistol865 said:
Did I do something wrong because I didn't pull the sim card when I flashed: Stock_KJ6_+_root-One-Click.jar (this has the blastoff v2 kernel). Also does Stock_KJ6_+_root-One-Click.jar (this has the blastoff v2 kernel) come with CWM Red?
Click to expand...
Click to collapse
reboot to cwm (recovery). wipe cache partition. advanced -> wipe dalvik cache. advanced -> fix permissions. reboot phone. Let it sit for a few minutes before doing anything (I'd say 10-15 minutes).
Oh weird. did that oneclick come with blastoff v2 and not 2.5?
Hmm, then do this. download blastoff v2.5, put that on your sdcard and install it from red cwm.
Then do what I said above. You should be back to blue after rebooting to recovery after flashing that kernel.
EDIT: if you really want red cwm (voodoo lagfix), I really don't know why you'd want that, but checkout my older subtly modified stock kernel.

bhundven said:
reboot to cwm (recovery). wipe cache partition. advanced -> wipe dalvik cache. advanced -> fix permissions. reboot phone. Let it sit for a few minutes before doing anything (I'd say 10-15 minutes).
Oh weird. did that oneclick come with blastoff v2 and not 2.5?
Hmm, then do this. download blastoff v2.5, put that on your sdcard and install it from red cwm.
Then do what I said above. You should be back to blue after rebooting to recovery after flashing that kernel.
EDIT: if you really want red cwm (voodoo lagfix), I really don't know why you'd want that, but checkout my older subtly modified stock kernel.
Click to expand...
Click to collapse
No..no.. I'll definitely take your word for it.. I'll stick with the blue. I just thought that with the lagfix, it would fix my problem with internal memory.
My problem now is my SIM card.. The phone reboots and I get : NO SIM CARD IN PHONE
AFTER YOU INSERT THE CARD, PLEASE REBOOT
EMERGENCY CALLS CAN BE USED]
I did as you said:
reboot to cwm (recovery). wipe cache partition. advanced -> wipe dalvik cache. advanced -> fix permissions. reboot phone. Let it sit for a few minutes before doing anything (I'd say 10-15 minutes).
Should I still install: download blastoff v2.5?
Thank you again for ALL your help.. You guys saved my phone..

[Q][HELP] Very bricked, please help

I have a GT-P1500, and I flashed a ROM .zip to /system with heimdall before I really grasped how flashing these kinds of things on samsung devices really works. Now everything is terrible.
I can boot into download mode and heimdall and odin both recognize my device. When I flash a recovery, I'm not able to boot into it even when I do the right key combinations and it says "booting recovery" in blue text in the corner on the samsung logo screen. Also, for some reason my download screen says "qualcomm secureboot: enabled" at the bottom of the other stuff. This is normal, right?
I've tried flashing the .tar.md5 firmware files from sammobile, but odin fails to flash them. I've tried kies, but it doesn't recognize my device. I've tried different computers. I've tried different recovery builds. I've tried everything I can think of.
Please help?

brickythebrick said:
I have a GT-P1500, and I flashed a ROM .zip to /system with heimdall before I really grasped how flashing these kinds of things on samsung devices really works. Now everything is terrible.
I can boot into download mode and heimdall and odin both recognize my device. When I flash a recovery, I'm not able to boot into it even when I do the right key combinations and it says "booting recovery" in blue text in the corner on the samsung logo screen. Also, for some reason my download screen says "qualcomm secureboot: enabled" at the bottom of the other stuff. This is normal, right?
I've tried flashing the .tar.md5 firmware files from sammobile, but odin fails to flash them. I've tried kies, but it doesn't recognize my device. I've tried different computers. I've tried different recovery builds. I've tried everything I can think of.
Please help?
Click to expand...
Click to collapse
It looks, like a locked bootloader. Which firmware you flashed?

Will try when I get home tonight, thank you for your kindness.

brickythebrick said:
Will try when I get home tonight, thank you for your kindness.
Click to expand...
Click to collapse
No problem my friend, but I just saw you mentioned p1500 and this p5100 thread. Sorry, i missed that too.
http://forum.xda-developers.com/galaxy-tab-10-1
Your problems will be sorted out there better than here.
Although I don't see any help or advice in your case. Since I am pretty sure you are on a carrier locked bootloader, sorry to be the one to break this on you which means you can't go custom and the carrier company is the real owner who doesn't want you to leave them.

Ah, 1500 was a typo. I meant 5100

Also, I can't do anything to the bootloader to fix this? Not even go back to stock?

brickythebrick said:
Also, I can't do anything to the bootloader to fix this? Not even go back to stock?
Click to expand...
Click to collapse
There must be something, you got me mixed up with P1500 . well, lets put few confusions to rest
what else do you have, I will need more details
Are you using a carrier locked tab 2 p5100?
or did you flash a carrier locked firmware on your unlocked tab?
you mentioned you flashed a rom zip from heimdall. which one exactly?
is your device booting up or you are just stuck in download mode?

The tablet boots, but the screen is just black and I can only try rebooting it. I can boot into download mode by holding power and volume down.
I do not have a carrier locked version, and I have not flashed any firmware packages as something eventually goes wrong and heimdall or odin stops there.
The device was booting into stock properly before I flashed the ROM incorrectly. I flashed the 5100 version of the ROM here: http://forum.xda-developers.com/galaxy-tab-2/10-inch-development/rom-cyanogenmod-13-cm13-0-t3303800

brickythebrick said:
The tablet boots, but the screen is just black and I can only try rebooting it. I can boot into download mode by holding power and volume down.
I do not have a carrier locked version, and I have not flashed any firmware packages as something eventually goes wrong and heimdall or odin stops there.
The device was booting into stock properly before I flashed the ROM incorrectly. I flashed the 5100 version of the ROM here: http://forum.xda-developers.com/galaxy-tab-2/10-inch-development/rom-cyanogenmod-13-cm13-0-t3303800
Click to expand...
Click to collapse
Update your bootloader to jelly bean. Flash from odin.
http://forum.xda-developers.com/showthread.php?t=2642005
Refer to this. Will work, no need to worry.

Sorry for replying so late, I have been really busy lately.
I am unable to update my bootloader: odin either outright fails or hangs on SetupConnection forever. After weeks of recearch and attempts, I see no answer. I guess I really am bricked forever? Damn.