[Firmware][2.3.6]UAE I9003JPKPM - Samsung Galaxy SL i9003

Another firmware Release for UAE.. no info about its version.
I think we need a tester for this..
PDA: I9003JPKPM
CSC: I9003OJPKPD
VersionNo version)
Date: 2012-06-11
Regions: Arabic
Download Link
I9003JPKPM_XSG
I9003JPKPM_XSS

No. Its not a value pack! I tried and confirmed this.
Sent from my GT-I9003 using xda premium

Please can someone test this firmware if it is a another Value Pack.. ?
I can't test it by myself because I am using Linux, I already know Heimdall but I am scared to flash it..
It was released in June 11, 2012..
http://www.sammobile.com/firmware/?page=8&view=4987

No, I Installed. absolutely it's not VALUE PACK. Just little change from earlier meddle-east Rom JPKPH. doesn't have face unlock or tw4.

Unknown_2517 said:
No, I Installed. absolutely it's not VALUE PACK. Just little change than earlier meddle-east Rom JPKPH.
Click to expand...
Click to collapse
Looks like they realized that their previous Value Pack was a total failure.
I think they'll take more time before releasing a new one (supposedly good).

yes. also this FW have problem with CF-ROOT. if u install any kernel must be using WIFI-FIX.ZIP to work wifi well.
DEODEX PACKAGE FOR JPKPM:
_ DELETE UNWANTED APPS
_ ADD WIFI FIX.
_ ADD CM9 EGL FILES.
_ ADD ROBOTO FONTS.
DOWNLOAD JPKPMDeodex.zip - 37MB

Silentkiller101197 said:
Please can someone test this firmware if it is a another Value Pack.. ?
I can't test it by myself because I am using Linux, I already know Heimdall but I am scared to flash it..
It was released in June 11, 2012..
http://www.sammobile.com/firmware/?page=8&view=4987
Click to expand...
Click to collapse
If you are on CM9 or other ext4 ROMs this should work to install KPE, first extract all the packages then on the terminal type from the directory where you have the files
sudo heimdall flash --repartition --primary-boot boot.bin --cache cache.rfs --modem modem.bin --normal-boot normal boot.img --param param.lfs --secondary-boot Sbl.bin --system system.rfs --user-data userdata.rfs
if you want to install the new ROM you can do the same by modifying the above command or you could tell me the name of the files, I could write another statement for flashing them.

Unknown_2517 said:
yes. also this FW have problem with CF-ROOT. if u install any kernel must be using WIFI-FIX.ZIP to work wifi well.
DEODEX PACKAGE FOR JPKPM:
_ DELETE UNWANTED APPS
_ ADD WIFI FIX.
_ ADD CM9 EGL FILES.
_ ADD ROBOTO FONTS.
DOWNLOAD JPKPMDeodex.zip - 37MB
Click to expand...
Click to collapse
how do I install DEODEX PACKAGE FOR JPKPM
please advice

1- install rom via odin.
2- install bck beta 14 kernel & cfroot via odin
3- go to recovery
4- choose install zip from sdcard
5- select my file and after insall finished reboot your device.

Unknown_2517 said:
1- install rom via odin.
2- install bck beta 14 kernel & cfroot via odin
3- go to recovery
4- choose install zip from sdcard
5- select my file and after insall finished reboot your device.
Click to expand...
Click to collapse
I have done it correctly but thw wifi problem is not over
can I go back to the earlier stock rom

What is value pack... i just got this phone, so not aware of it.
Sent from my Dell Streak using xda app-developers app

nitin1978 said:
What is value pack... i just got this phone, so not aware of it.
Sent from my Dell Streak using xda app-developers app
Click to expand...
Click to collapse
Value pack is a update packege...with tw4 ui like galaxy s2 ...
And face unlock ...
Nothing much ...thts Value pack ...
W8...No thts joke pack by Samsung
Sent from my GT-I9100 using Tapatalk 2

I have done it correctly but thw wifi problem is not over
can I go back to the earlier stock rom
Click to expand...
Click to collapse
do you install bck kernel v14? wifi problem gone with it.
you can go back to JPKPH. previous meddle east rom with ics theme.

Unknown_2517 said:
do you install bck kernel v14? wifi problem gone with it.
you can go back to JPKPH. previous meddle east rom with ics theme.
Click to expand...
Click to collapse
I am back with JPKPH I tried the fix it did not work
however the wifi problem is still presisting
what else can i do

Unknown_2517 said:
1- install rom via odin.
2- install bck beta 14 kernel & cfroot via odin
3- go to recovery
4- choose install zip from sdcard
5- select my file and after insall finished reboot your device.
Click to expand...
Click to collapse
Your ZIP seems to include some kind of 'WiFi fix'. This is not needed with BCK beat 14 fix and may even break WiFi again (see this post). It would be better to provide a seperate link to loSconosciuto's WiFi fix for everybody who is not using BCK

I am confused now what fix should I use .

dr-PHP said:
I am confused now what fix should I use .
Click to expand...
Click to collapse
do this flash XXKPE then flash ur value pack and then flash bam kernel v14fix universal ..first tym u turn on wifi it might reboot but after that everything will be fine and as msooth as butter ! i;ve been using this kernel for past 4 days n no problems yet n i dont think there will b any !

shriomman said:
do this flash XXKPE then flash ur value pack and then flash bam kernel v14fix universal ..first tym u turn on wifi it might reboot but after that everything will be fine and as msooth as butter ! i;ve been using this kernel for past 4 days n no problems yet n i dont think there will b any !
Click to expand...
Click to collapse
I can only use JPKPH or JPKPM I need arabic support.and there is no value pack for that yet.
now that I have this wifi problem
shall i reflash the rom / repartation and then use the bam kernel v14fix universal

dr-PHP said:
I can only use JPKPH or JPKPM I need arabic support.and there is no value pack for that yet.
now that I have this wifi problem
shall i reflash the rom / repartation and then use the bam kernel v14fix universal
Click to expand...
Click to collapse
no need for repartition (pt file) just flash kpe>jpkph/m and once it boots then go to download mode n flash bam v14fix

shriomman said:
no need for repartition (pt file) just flash kpe>jpkph/m and once it boots then go to download mode n flash bam v14fix
Click to expand...
Click to collapse
I tried that but the drop in wifi is not getting corrected ,.wifi diconnects every minute
is there any thin I can do

Related

[ROM] OUM - Custom ROMs for I5801 users

DISCONTINUED
Official Update Modified
OUM GME
Hacks, Scripts and Kernel will Spice up your latest update.
Choose this ROM if you have used the components before and want them in your phone just after one flash
Samsung Indian Update DDJP4
Fugumod 2.4 Beta 3 (800Mhz)
Root
deodexed app and framework
Busybox 1.18.4
JIT
Live Wallpapers
Malware Patch
5 Lockscreen Mod
Powermenu Mod
Gingerbread CKVed 0.9 [for Powermenu and lockscreen mod] (clarkkov)
Bootanimation
app2sd (kyrillos13)
Flash with Odin as "One Package" (should boot before odin timer stops)*
No stock browser bug
Download link: http://www.multiupload.com/F9JQSU6H82
OUM CE
Bare Minimum Rom
Choose this ROM instead of stock ROM (you get Stock ROM with minimum things)
Samsung Indian Update DDJP4
Root
Busybox 1.18.4
Live Wallpapers
Malware Patch
Flash with Odin as "One Package" (should boot before odin timer stops)*
Download link: Do you want me to upload such minimum thing? Suggest in comments
Note: I am not a developer. I am just a user.
Screenshots
Attached Screenshots
Steps to flash the rom is straight forward
Load appropriate apollo_0531.ops file in odin and flash the .tar as "one package"
This will get the rom working
There are 2 things that fugumod does
1 /etc/init.d scripts start
2 Filesystems are recognized
Best way to I do is
When i am on Stock kernel I delete all files from /sdcard/Android/data/fugumod/
and keep fs.convert with lines
---------------------
mmcblk0p2 ext4
stl6 ext2
stl7 ext4
stl8 ext2
---------------------
boot in recovery and do factory reset and delete cache
Flash fugumod
and wait for ages so the fs gets converted
If you dont want to wait..
dont keep any files in fugumod directory when on stock kernel and rest remains same
i.e factory reset and flash fugumod
for a quick workaround if you get stuck after fugumod flash
remove sdcard
Do data/cache wipe and factory reset from recovery
and boot.. you'll get in os faster..
once the phone is on insert sdcard and wait for it to get mounted
delete all files from fugumod directory and reboot
Initially fugumod is super slow because it has to convert fs load scripts and cpu is not scaled properly.
once the fs is fine, converted and recorded in fs.current the init scripts (apps2sd) are also cool with everything
then when you see the interface its very slow because of inappropriate cpu speeds (use set cpu to set settings of your choice)
There is a also a zipalign script which will run for first time and take time to make itself comfortable
Nice...
Good work! Nice to see new Devs popping up!
revant said:
for a quick workaround
remove sdcard
Do data/cache wipe and factory reset from recovery
and boot.. you'll get in os faster..
once the phone is on insert sdcard and wait for it to get mounted
delete all files from fugumod directory and reboot
Initially fugumod is super slow because it has to convert fs load scripts and cpu is not scaled properly.
once the fs is fine, converted and recorded in fs.current the init scripts (apps2sd) are also cool with everything
then when you see the interface its very slow because of inappropriate cpu speeds (use set cpu to set settings of your choice)
Click to expand...
Click to collapse
hi
thanks but i need to say something went wrong
because i went back to ddjp4 rooted it added fungumod & did the apps2sd scripts and all this did not take all the time it took while i flashed fungu after ur rom it took like 8 mins & it was stuck on the android boot
i had no problem flashing ur rom that went well
only after the fungu flashing part is when i got stuk. well ill try the some again latter
Note : ill remove my two post to give u continuity ok
nice...... can i have the stock framework..... the odexed one...... cause it's not out on samfirmware...... thanks
anant.0097 said:
nice...... can i have the stock framework..... the odexed one...... cause it's not out on samfirmware...... thanks
Click to expand...
Click to collapse
http://www.multiupload.com/NVKDM4DCK7
revant said:
http://www.multiupload.com/NVKDM4DCK7
Click to expand...
Click to collapse
damn that was fast!!....... you had already uploaded the stock earlier or just uploaded?
anant.0097 said:
damn that was fast!!....... you had already uploaded the stock earlier or just uploaded?
Click to expand...
Click to collapse
There was already a post
http://forum.xda-developers.com/showthread.php?t=1126250
revant said:
There was already a post
http://forum.xda-developers.com/showthread.php?t=1126250
Click to expand...
Click to collapse
Ah!........
Finally on an Indian firmware....just a quick queston- is it only me or everyone's having the packet data problem in other regions firmwares and custom ROMS ??
-->my point is i'm able to connect to GPRS/3G only on Asian firmwares :/
niteshtak said:
Finally on an Indian firmware....just a quick queston- is it only me or everyone's having the packet data problem in other regions firmwares and custom ROMS ??
-->my point is i'm able to connect to GPRS/3G only on Asian firmwares :/
Click to expand...
Click to collapse
hi
its only u see i have flashed all the roms available here stok and custom roms i have never had this problem u are facing
but many stok & custom roms(most recent custom do have it) dont have apn so next time chek if ur apn is set and do the needful reg the same
haree said:
hi
its only u see i have flashed all the roms available here stok and custom roms i have never had this problem u are facing
but many stok & custom roms(most recent custom do have it) dont have apn so next time chek if ur apn is set and do the needful reg the same
Click to expand...
Click to collapse
Yes i did that...copied the global apn.conf file >> then restarted >> then set the default APN settings..but got no results !!
I guess it's because of my service provider..
niteshtak said:
Finally on an Indian firmware....just a quick queston- is it only me or everyone's having the packet data problem in other regions firmwares and custom ROMS ??
-->my point is i'm able to connect to GPRS/3G only on Asian firmwares :/
Click to expand...
Click to collapse
Go to /system/etc and copy apns-conf.xml
and use this file on all Roms
or use an app called apns backup restore
clarkkov said:
Looks cool!
Did not try it but I like it.
Sent from cramped soft keyboard!
Click to expand...
Click to collapse
Once again, Thanks for the theme Its beautiful!
The package have a bootloader ?
Darius_AWS said:
The package have a bootloader ?
Click to expand...
Click to collapse
hi
nooooooooo
your rom is fast and the theme is AWESOME ! :O
EDIT: no CWM recovery

[Q] kernel vs cf-root

hi guys just confused, what is the difference btw CF ROOT and the said KERNEL?all i know is that cf-root is automatically root ur phone after flashing, but i dont know what is the main function of the said kernel..what is that for?
cfroot IS a kernel itself
and here u go
CF is a kernel n Even a kernel roots your phone...specific kernels have a greater range of cpu frequency eg-vurrut.cf root is universal..some.kernel is mostly built for specific ROM.. Though it can be used elsewhere...
Press thanks if i helped.
Sent from my GT-I9003 using XDA
an0nym0us_ said:
cfroot IS a kernel itself
and here u go
Click to expand...
Click to collapse
Not exactly. CF-root is a package containing a rootable kernel, the Superuser package (the root) and all necessary scripts. But I agree with you on the google thing
Short answer:
The kernel is the core of the Linux operating system, on top of which Android runs.
The ramdisk is - in case of the i9003 - a package containing the kernel, some scripts, some elementary executables (mainly init) and a recovery.
The recovery is a backup operating system which brings it's own, small kernel.
A CF-root "kernel" is a ramdisk which contains a rootable kernel, Superuser files and typically a custom recovery.
loneagl said:
CF is a kernel n Even a kernel roots your phone...specific kernels have a greater range of cpu frequency eg-vurrut.cf root is universal..some.kernel is mostly built for specific ROM.. Though it can be used elsewhere...
Press thanks if i helped.
Sent from my GT-I9003 using XDA
Click to expand...
Click to collapse
meaning to say can i flash kernel although i already flashed the cf root?
please see this procedure if it is correct..just as an exampe, plz bear with me.. thanks
since i am in froyo and wanted to flash to the latest ginger is this the right flashing procedure?
xxkpe >> XXKPQ >> cf-root of ganesh >> POSEIDON ROM >> reset, clear cache and dalvik >>> kernel (any as long as for XXKPQ)
is this right?
i think kernel is just a tweak just to improve the performance of out phone..am i ryt?
Nope...kernel roots your ROM...here's the procedure...flash xxkpe with pit file...than restart phone again enter download...than flash xxkpq...restart...enter download flash kernel/cf root...don't have to flash both..currently i have xxkpq with uc version 11 kernel...pretty smooth
Press thanks if i helped..
Sent from my GT-I9003 using XDA

[Resolved] [Solved][Q] Cant install cm9.1 on Xperia SK17i (Mango) need help :c

Hey, please spare some time for me as I really want this to be fixed
I am using a Mini Pro running on Stock ROM and Kernal
It is rooted and has CWM 5.0.2.7-nAa
I recently downloaded Cyanogenmod 9.1 for my xperia mini pro (Sk17i) (Mango)
I went through the following steps to install it:
Did data/factory wipe
Wiped cache partition
Wiped Dalvik cache
Wiped battery stats
Then i proceeded to install .zip from sd card and so on until i located the .zip which was on my sd cards root directory
put it to install and i end up with this
--Installing: /sdcard/cm9.1.0-mango.zip
Finding update package
Opening update package
Installing update
assert failed: getprop ("ro.product.device") == "SK17i" | | getprop ("ro.build.product") == "SK17i" | | getprop ("ro.product.device") == "SK17a" | | getprop ("ro.build.product") == "SK17a" | | getprop ("ro.product.device") == "mango" | | getprop ("ro.build.product") == "mango"
E:Error in /sdcard/cm-9.1.0-mango.zip
(Status 7)
Installation aborted.
I want to know why i am getting this
I tried CM10 and 7 for my device and i get the same errors
Please give me instructions on what to do in the most simplest ways possible, you can give links to tutorials but i may find them hard because most seem complicated to me so please try and tell me in your own simple words what to do, I am a complete noob at this
I want to Install Cyanogenmods Rom so that i can install a firmware that makes the music volume more precise and makes the phone faster
I need all the help I can so please
Any additional info you want, just ask
Naweed Reza said:
Hey, please spare some time for me as I really want this to be fixed
I am using a Mini Pro running on Stock ROM and Kernal
It is rooted and has CWM 5.0.2.7-nAa
I recently downloaded Cyanogenmod 9.1 for my xperia mini pro (Sk17i) (Mango)
I went through the following steps to install it:
Did data/factory wipe
Wiped cache partition
Wiped Dalvik cache
Wiped battery stats
Then i proceeded to install .zip from sd card and so on until i located the .zip which was on my sd cards root directory
put it to install and i end up with this
--Installing: /sdcard/cm9.1.0-mango.zip
Finding update package
Opening update package
Installing update
assert failed: getprop ("ro.product.device") == "SK17i" | | getprop ("ro.build.product") == "SK17i" | | getprop ("ro.product.device") == "SK17a" | | getprop ("ro.build.product") == "SK17a" | | getprop ("ro.product.device") == "mango" | | getprop ("ro.build.product") == "mango"
E:Error in /sdcard/cm-9.1.0-mango.zip
(Status 7)
Installation aborted.
I want to know why i am getting this
I tried CM10 and 7 for my device and i get the same errors
Please give me instructions on what to do in the most simplest ways possible, you can give links to tutorials but i may find them hard because most seem complicated to me so please try and tell me in your own simple words what to do, I am a complete noob at this
I want to Install Cyanogenmods Rom so that i can install a firmware that makes the music volume more precise and makes the phone faster
I need all the help I can so please
Any additional info you want, just ask
Click to expand...
Click to collapse
Seems to me u probably have a device not "introducing" itself properly Or maybe it's build...
Maybe try the other way around and it right since the beginning.
Get yourself first:
- stock kernel & s/w rreinstalled (via PC Companion)
- since this is sk17i - unlock ur bootloader via official Sony way: http://unlockbootloader.sonymobile.com/ (yet first watch the tutorial form Mihahn: http://forum.xda-developers.com/showthread.php?p=31376248#post31376248 )
- get urself latest FlashTool and install it (http://androxyde.github.com/), use it to root ur phone -> http://forum.xda-developers.com/showthread.php?p=30441163#post30441163
-
- go in very details through here http://forum.xda-developers.com/showthread.php?t=1629334 and
1. download Kernel TFT (appropriate one) and flash it using flash tool (and guess what... here is picture guide by Mihahn: http://forum.xda-developers.com/showthread.php?t=1879982)
2. upload CM9-3 to sd card and try again with CWMRec/Flashtool mode install (depending whether u download .zip or .tft with ROM)
and read read read before u do smthng bad to ur small friend.
PsychoFish81 said:
Seems to me u probably have a device not "introducing" itself properly Or maybe it's build...
Maybe try the other way around and it right since the beginning.
Get yourself first:
- stock kernel & s/w rreinstalled (via PC Companion)
- since this is sk17i - unlock ur bootloader via official Sony way: http://unlockbootloader.sonymobile.com/ (yet first watch the tutorial form Mihahn: http://forum.xda-developers.com/showthread.php?p=31376248#post31376248 )
- get urself latest FlashTool and install it (http://androxyde.github.com/), use it to root ur phone -> http://forum.xda-developers.com/showthread.php?p=30441163#post30441163
-
- go in very details through here http://forum.xda-developers.com/showthread.php?t=1629334 and
1. download Kernel TFT (appropriate one) and flash it using flash tool (and guess what... here is picture guide by Mihahn: http://forum.xda-developers.com/showthread.php?t=1879982)
2. upload CM9-3 to sd card and try again with CWMRec/Flashtool mode install (depending whether u download .zip or .tft with ROM)
and read read read before u do smthng bad to ur small friend.
Click to expand...
Click to collapse
Thanks for replying
I will try it out and let you know how it went
I dont get the first bit about getting a stock kernal and s/w reinstalled
Does that basically mean unroot my phone or something
And whats s/w (Sorry for being a complete noob)
More doubts, really sorry
PsychoFish81 said:
Seems to me u probably have a device not "introducing" itself properly Or maybe it's build...
Maybe try the other way around and it right since the beginning.
Get yourself first:
- stock kernel & s/w rreinstalled (via PC Companion)
- since this is sk17i - unlock ur bootloader via official Sony way: http://unlockbootloader.sonymobile.com/ (yet first watch the tutorial form Mihahn: http://forum.xda-developers.com/showthread.php?p=31376248#post31376248 )
- get urself latest FlashTool and install it (http://androxyde.github.com/), use it to root ur phone -> http://forum.xda-developers.com/showthread.php?p=30441163#post30441163
-
- go in very details through here http://forum.xda-developers.com/showthread.php?t=1629334 and
1. download Kernel TFT (appropriate one) and flash it using flash tool (and guess what... here is picture guide by Mihahn: http://forum.xda-developers.com/showthread.php?t=1879982)
2. upload CM9-3 to sd card and try again with CWMRec/Flashtool mode install (depending whether u download .zip or .tft with ROM)
and read read read before u do smthng bad to ur small friend.
Click to expand...
Click to collapse
I am so sorry if I am bothering you or anything but I was going through the links, very handy and simple, and i came across this in the last link you have put about downlaoding a kernal .TFT
When reading through it says
Now you are ready to install a custom rom/kernel.
Let's start:
You go to development section and choose a rom you want for your device. You download the rom and the kernel for your device (make sure it is the right for yours! Sometimes the kernel is included in the installation zip file of the rom.
Now you have the boot.img and the rom
Click to expand...
Click to collapse
Now where is the Development section?
Where do i find the Boot.img?
What is the proper one for my sk17i?
I have downloaded CM9.1 for Mango from the cm official website and there is a boot.img inside the zip, should i just extract the boot.img out and keep it near the .zip file? and should i use this instead of the mini cm provided?
I really appreciate the links you have given and hope all my doubts can be cleared for me to actually start the process
Will hit that thanks button if it is a success :good:
Naweed Reza said:
Thanks for replying
I will try it out and let you know how it went
I dont get the first bit about getting a stock kernal and s/w reinstalled
Does that basically mean unroot my phone or something
And whats s/w (Sorry for being a complete noob)
Click to expand...
Click to collapse
S/W = Software.
To install stock software, even if ur phone is in bootloop, u may use PC Companion.
1. Start mobile in Flash mode (BACK/VOL+/- pressed when phone turned off and connecting usb cable + PC Companion enabled)
2. Agree on loosing all data Choose model (be careful -u20 and sk17i and sk17a are all mini pro, use hardware version marking)
3. allow it to work - it will download stock software for ur mini pro
Effect: unroot stock phone. U can root it again with FlashTool or one of root methods (for sk17i I believe so called zergRush does the job - search forums or gogole it )
Afterwards proceed with instructions for
1. Rooting
2. Unlocking bootloader
3. Reflashing phone with custom kernel and custom ROM
BE ADVISED: Above "root/unlock bootloader" actions usually void ur warranty. Be sure what u r doing, read thoroughly steps to not brick ur phone and do not be scared if bootloop happens - just find a way to enter flash mode again and use other .tft/ROM
OR - if u have already unlocked bootloader - simply download appropriate .tft file and flash it on ur phone using FlashTool. (the so called generic sk17i ROM has been provided in .tft format here: http://rumah-android.com/official-xperia-mini-pro-sk17i-4-1-b-0-431-firmware-ics-4-0-4.html)
U mighgt want to see through some of posts here to reduce ur noobishness http://forum.xda-developers.com/showthread.php?t=471521
And use custom kernels/stock roms known for their stability in latest release/nigh release (search for xda forum threads).
PsychoFish81 said:
Seems to me u probably have a device not "introducing" itself properly Or maybe it's build...
Maybe try the other way around and it right since the beginning.
Get yourself first:
- stock kernel & s/w rreinstalled (via PC Companion)
- since this is sk17i - unlock ur bootloader via official Sony way: http://unlockbootloader.sonymobile.com/ (yet first watch the tutorial form Mihahn: http://forum.xda-developers.com/showthread.php?p=31376248#post31376248 )
- get urself latest FlashTool and install it (http://androxyde.github.com/), use it to root ur phone -> http://forum.xda-developers.com/showthread.php?p=30441163#post30441163
-
- go in very details through here http://forum.xda-developers.com/showthread.php?t=1629334 and
1. download Kernel TFT (appropriate one) and flash it using flash tool (and guess what... here is picture guide by Mihahn: http://forum.xda-developers.com/showthread.php?t=1879982)
2. upload CM9-3 to sd card and try again with CWMRec/Flashtool mode install (depending whether u download .zip or .tft with ROM)
and read read read before u do smthng bad to ur small friend.
Click to expand...
Click to collapse
PsychoFish81 said:
S/W = Software.
To install stock software, even if ur phone is in bootloop, u may use PC Companion.
1. Start mobile in Flash mode (BACK/VOL+/- pressed when phone turned off and connecting usb cable + PC Companion enabled)
2. Agree on loosing all data Choose model (be careful -u20 and sk17i and sk17a are all mini pro, use hardware version marking)
3. allow it to work - it will download stock software for ur mini pro
Effect: unroot stock phone. U can root it again with FlashTool or one of root methods (for sk17i I believe so called zergRush does the job - search forums or gogole it )
Afterwards proceed with instructions for
1. Rooting
2. Unlocking bootloader
3. Reflashing phone with custom kernel and custom ROM
BE ADVISED: Above "root/unlock bootloader" actions usually void ur warranty. Be sure what u r doing, read thoroughly steps to not brick ur phone and do not be scared if bootloop happens - just find a way to enter flash mode again and use other .tft/ROM
OR - if u have already unlocked bootloader - simply download appropriate .tft file and flash it on ur phone using FlashTool. (the so called generic sk17i ROM has been provided in .tft format here: http://rumah-android.com/official-xperia-mini-pro-sk17i-4-1-b-0-431-firmware-ics-4-0-4.html)
U mighgt want to see through some of posts here to reduce ur noobishness http://forum.xda-developers.com/showthread.php?t=471521
And use custom kernels/stock roms known for their stability in latest release/nigh release (search for xda forum threads).
Click to expand...
Click to collapse
Alright, thanks alot
Will get to it
I cant just plug my phone in and use the repair option from support zone?
It says that will erase all internal memory by replacing the software
So should I use that method?
And yeah, ive experience bootloop before so im fine and know what to do
And after all this is done and i get everything tis fine to restore my apps and studd using titanium right?
Naweed Reza said:
Now where is the Development section?
Where do i find the Boot.img?
What is the proper one for my sk17i?
I have downloaded CM9.1 for Mango from the cm official website and there is a boot.img inside the zip, should i just extract the boot.img out and keep it near the .zip file? and should i use this instead of the mini cm provided?
I really appreciate the links you have given and hope all my doubts can be cleared for me to actually start the process
Will hit that thanks button if it is a success :good:
Click to expand...
Click to collapse
Development Section is a section of XDA forum, where crazy programmers deliver their kernels and ROMS...
This link is in Development Section, I believe the CM u r looking for:
http://forum.xda-developers.com/showthread.php?t=1629334
Be advised - above CM requires custom kernel sk17i, it says it in Requirements in above link -> http://forum.xda-developers.com/showthread.php?p=25550442
If u succeed to unlock bootloader, it gets pretty simple, simpler than in Mihahn guide.
1. Given u have bootloader unlocked: using FlashTool u flash kernel (the .tft file) - thus u won't have to care about separate boot.img / .sin files flashing, they are incorporated in .tft thing.
2, If it suceeds - using flashtool u reset to recovery
3. USING CWM options - u mount ur USB storage
4. U put from ur PC zip with CM9
5. Unmount USB storage
6. Wipe all data as it says in ROM thread - otherwise u risk **** to hit the fan
7. Update from .zip, point to zip on sdcard
8.Relax
9. Get cofee
10. Relax
11. Watch it progress
12. Relax
13. Pray for best
14. After it finishes - reboot to normal. Be advised - first reboot after flashing ROM is always long, linux + ROM does automagic stuff
Short who's who:
kernel; linux kernel, da animal that is engine of subsequent android devices (i.e. kernel with Ice Cream Sandwich or Jelly Beans Adnroid releases) U NEED CAREFULLY CHOOSE THE ONE APPRIOPRIATE FOR UR DEVICE
ROM - closest to operating system u get on mobile devices, u might have different ROMs wortking on specific kernel
CWM - clockworkmode recovery - ur last resort if **** hits the fan to change ROM without reflashing kernel
I hope I got this as simple as I could... Sorry, I was former mobile s/w developer, such stuff is just usual for me, my stock u20i software didn't last 24h - I just immediately reflashed it co CM6, later to CM7 - just to have some options not available in stock rom connected to power management and application management.
EDIT: Combining answers
Naweed Reza said:
Alright, thanks alot
Will get to it
I cant just plug my phone in and use the repair option from support zone?
It says that will erase all internal memory by replacing the software
So should I use that method?
And yeah, ive experience bootloop before so im fine and know what to do
And after all this is done and i get everything tis fine to restore my apps and studd using titanium right?
Click to expand...
Click to collapse
Yes.
Generic ROM / Repair options brings u back to stock sk17i SE ROM. I dont remeber if repair option uploaded latest update, if yes - u might still have to use generic sk17i tft thing.
With restoring option - to be honest I didn't test it. It didn't worked well for me on CM6 and CM7 upgrade, yet possibly I did not all the things right. Still, if u have backed up apps and data on sdcard, it might be possible - please check it before reflashing ROMS (just root, install latest titanium backup and simply test the stuff).
Good luck on ur journey to reflash...
PsychoFish81 said:
Development Section is a section of XDA forum, where crazy programmers deliver their kernels and ROMS...
This link is in Development Section, I believe the CM u r looking for:
http://forum.xda-developers.com/showthread.php?t=1629334
Be advised - above CM requires custom kernel sk17i, it says it in Requirements in above link -> http://forum.xda-developers.com/showthread.php?p=25550442
If u succeed to unlock bootloader, it gets pretty simple, simpler than in Mihahn guide.
1. Given u have bootloader unlocked: using FlashTool u flash kernel (the .tft file) - thus u won't have to care about separate boot.img / .sin files flashing, they are incorporated in .tft thing.
2, If it suceeds - using flashtool u reset to recovery
3. USING CWM options - u mount ur USB storage
4. U put from ur PC zip with CM9
5. Unmount USB storage
6. Wipe all data as it says in ROM thread - otherwise u risk **** to hit the fan
7. Update from .zip, point to zip on sdcard
8.Relax
9. Get cofee
10. Relax
11. Watch it progress
12. Relax
13. Pray for best
14. After it finishes - reboot to normal. Be advised - first reboot after flashing ROM is always long, linux + ROM does automagic stuff
Short who's who:
kernel; linux kernel, da animal that is engine of subsequent android devices (i.e. kernel with Ice Cream Sandwich or Jelly Beans Adnroid releases) U NEED CAREFULLY CHOOSE THE ONE APPRIOPRIATE FOR UR DEVICE
ROM - closest to operating system u get on mobile devices, u might have different ROMs wortking on specific kernel
CWM - clockworkmode recovery - ur last resort if **** hits the fan to change ROM without reflashing kernel
I hope I got this as simple as I could... Sorry, I was former mobile s/w developer, such stuff is just usual for me, my stock u20i software didn't last 24h - I just immediately reflashed it co CM6, later to CM7 - just to have some options not available in stock rom connected to power management and application management.
EDIT: Combining answers
Yes.
Generic ROM / Repair options brings u back to stock sk17i SE ROM. I dont remeber if repair option uploaded latest update, if yes - u might still have to use generic sk17i tft thing.
With restoring option - to be honest I didn't test it. It didn't worked well for me on CM6 and CM7 upgrade, yet possibly I did not all the things right. Still, if u have backed up apps and data on sdcard, it might be possible - please check it before reflashing ROMS (just root, install latest titanium backup and simply test the stuff).
Good luck on ur journey to reflash...
Click to expand...
Click to collapse
Thanks,
Using SUS right now and its repairing, hoping for the best, I only lose contacts messages and calender
The rest is backed up with titanium
I will inform you when im donw through the whole process
And do i have to install CM Mini?
Or i can choose any Cyanogenmod for my phone? (THe Sk17i ones from the official website) or i have to only use the one you provided
Naweed Reza said:
Thanks,
Using SUS right now and its repairing, hoping for the best, I only lose contacts messages and calender
The rest is backed up with titanium
I will inform you when im donw through the whole process
And do i have to install CM Mini?
Or i can choose any Cyanogenmod for my phone? (THe Sk17i ones from the official website) or i have to only use the one you provided
Click to expand...
Click to collapse
U can choose any CyanogenMod marked as suitable for ur phone (xperia mini pro, sk17i), yet
- PAY ATTENTION TO REQUIREMENTS: rooting, unlocking bootloader, which kernel version etc.
- READ SEVERAL TIMES BEFORE EXECUTING! Very important... developer put most important informations in posts, yet specific issuies are reproted and solved as froum thread goes by
Step 1 is done
Okay, I have Restored the phone to factory using SUS
But check this link out and see if i can flash this CM instead
http://wiki.cyanogenmod.org/index.php?title=Install_CM_for_mango
Unlocked bootloader
PsychoFish81 said:
U can choose any CyanogenMod marked as suitable for ur phone (xperia mini pro, sk17i), yet
- PAY ATTENTION TO REQUIREMENTS: rooting, unlocking bootloader, which kernel version etc.
- READ SEVERAL TIMES BEFORE EXECUTING! Very important... developer put most important informations in posts, yet specific issuies are reproted and solved as froum thread goes by
Click to expand...
Click to collapse
Okay, sorry it took long, but i just Unlocked my bootleader, after restarting my phone i get the welcome message and basically everything is like it was out of the box, is that supposed to happen?
Does unlocking the bootloader reset my phone?
Btw i used the CMD Method
Not rooting
PsychoFish81 said:
U can choose any CyanogenMod marked as suitable for ur phone (xperia mini pro, sk17i), yet
- PAY ATTENTION TO REQUIREMENTS: rooting, unlocking bootloader, which kernel version etc.
- READ SEVERAL TIMES BEFORE EXECUTING! Very important... developer put most important informations in posts, yet specific issuies are reproted and solved as froum thread goes by
Click to expand...
Click to collapse
HELP
I have flashed the kernal to a xperia arc kernal (TO downgrade for rooting)
I start up doomlords rooter thingy
And once i press anykey its on this
daemon not running. Start it now
daemon started successfully
And its just there
Ive used this program to root before and it worked
Btw after installing the neo kernal the phone doesnt restart, only on black scree, ive gotten that before but it had rooted successfully before
Please help me out :/
what are you doing?
if you want cm10, you don't need to root you phone, just simply flashing the rom will give you root
also flashing a kernel not meant for your device will obviosely create problems
instead try flashing this kernel
http://forum.xda-developers.com/showthread.php?t=2076764
and this rom
http://forum.xda-developers.com/showthread.php?t=1780326
Sorry for the inconvinience
Alright then, sorry for my stupidity, i realized the phone had to be connected in MSC
*Facepalm*
Rooting done, going to now flash it back
Wish me luck :fingers-crossed:
Thanks alot
PsychoFish81 said:
Seems to me u probably have a device not "introducing" itself properly Or maybe it's build...
Maybe try the other way around and it right since the beginning.
Get yourself first:
- stock kernel & s/w rreinstalled (via PC Companion)
- since this is sk17i - unlock ur bootloader via official Sony way: http://unlockbootloader.sonymobile.com/ (yet first watch the tutorial form Mihahn: http://forum.xda-developers.com/showthread.php?p=31376248#post31376248 )
- get urself latest FlashTool and install it (http://androxyde.github.com/), use it to root ur phone -> http://forum.xda-developers.com/showthread.php?p=30441163#post30441163
-
- go in very details through here http://forum.xda-developers.com/showthread.php?t=1629334 and
1. download Kernel TFT (appropriate one) and flash it using flash tool (and guess what... here is picture guide by Mihahn: http://forum.xda-developers.com/showthread.php?t=1879982)
2. upload CM9-3 to sd card and try again with CWMRec/Flashtool mode install (depending whether u download .zip or .tft with ROM)
and read read read before u do smthng bad to ur small friend.
Click to expand...
Click to collapse
If I ever meet you in real life, i would give you a hug
I dont know how to thank you!
It worked, i followed the original instructions which are quoted above ^ and it worked
I used a .img file to flash using flashtool and then flashed using CWM6 which came with the kernal
In the startup process
One thing that is a bummer is the slide out keyboards symbols which are printed on my phone do not match the ones which came with CM9
Meaning, on letter 'M' there is the symbol "%" in blue, so when i press the function button on the keyboard i end up with another Symbol when pressing "M", any way to fix it??
And one more thing
I have CM9, is it recommended to install CM10 nightly or should i wait for a stable release?
And if CM10 was good to install what steps should I use to install it?
Should i just place the .zip in the root of sd, then bootup in CWM and then install zip from sdcard?
Or i use the method you gave above?
Or I just boot in CWM and clear data and install from SD?
Hoping for a reply, and thanks alot! :laugh:
Naweed Reza said:
If I ever meet you in real life, i would give you a hug
I dont know how to thank you!
It worked, i followed the original instructions which are quoted above ^ and it worked
I used a .img file to flash using flashtool and then flashed using CWM6 which came with the kernal
In the startup process
One thing that is a bummer is the slide out keyboards symbols which are printed on my phone do not match the ones which came with CM9
Meaning, on letter 'M' there is the symbol "%" in blue, so when i press the function button on the keyboard i end up with another Symbol when pressing "M", any way to fix it??
And one more thing
I have CM9, is it recommended to install CM10 nightly or should i wait for a stable release?
And if CM10 was good to install what steps should I use to install it?
Should i just place the .zip in the root of sd, then bootup in CWM and then install zip from sdcard?
Or i use the method you gave above?
Or I just boot in CWM and clear data and install from SD?
Hoping for a reply, and thanks alot! :laugh:
Click to expand...
Click to collapse
if you want to install a cm10 you need a compatible cm 10 kernel
this one is good http://forum.xda-developers.com/showthread.php?t=2076764
cm 10 is very stable I also have the xperia mini pro and this rom is so awesome
http://forum.xda-developers.com/showthread.php?t=1832308
just follow the instructions for both links you should have cm10 in no time
cs098 said:
if you want to install a cm10 you need a compatible cm 10 kernel
this one is good http://forum.xda-developers.com/showthread.php?t=2076764
cm 10 is very stable I also have the xperia mini pro and this rom is so awesome
http://forum.xda-developers.com/showthread.php?t=1832308
just follow the instructions for both links you should have cm10 in no time
Click to expand...
Click to collapse
The CM10 Nightly i download from CM official website has a boot.img inside the zip
I can use that as the kernal to flash?
Naweed Reza said:
The CM10 Nightly i download from CM official website has a boot.img inside the zip
I can use that as the kernal to flash?
Click to expand...
Click to collapse
yep any cm10 kernel would work, however the fxp one does not have the best battery life or the best performance but it is the most stable

HTC One s C2 Kernel_v1.1. added CPU controller, sweep2wake, GPU overclocked from 300,

HTML:
Add sweep2wake
Kernel update version based on sweep2wake v1.0:
HTML:
1, updated version v1.1
Add GPU overclocked to 2, 300
3, adding CRT hack
4、added fsync control (Ezekeel)
5、added V(R) and SIO I/O schedulers
6、set SIO as default CPU scheduler
7, removal system R/W access restrictions
If you use the kernel encounters in the course of any problems, please submit your error to me
[email protected]
If you're any good on kernel modifications submitted to me also
My github:http://github.com/poppy1
This kernel using the luxandroid_v4 test. Thank you luxandroid
Thank you very much show-p1984 for sweep2wake code contribution, as well as help
If you flush this kernel boot prompt WI-FI errors, Then please use my providing driver replaces to the appropriate position of the system can resolve
What is sweep2wake?
Since this function collides with HTC's screenshot function (PWR+HOME) it will be disabled. Use the AOSP screenshot instead. (PWR+VOL.DOWN at the same time and hold it for about a sec)
This has a few advantages, one is a nice animation the second would be that it is hardcoded by google into any ICS firmware you can find. That means: no matter which device you will pick up, as long as it has ICS this function should work out of the box.
Click to expand...
Click to collapse
China download site:http://pan.baidu.com/share/link?shareid=330142&uk=3493151742&third=15
How do I flash?
1, Download poppy_villec2_jellybean_3.4_kernel_v1.1.zip.
2, Extract the poppy_villec2_jellybean_3.4_kernel_v1.1.zip are boot.img.
3, Using the fastboot brush into the phone. Code:
HTML:
fastboot flash boot boot.img
some nice development is going on here ,nice work man
Thnx buddy, made my phone more better
thank you mate, it is awesome
Edit- My wifi is not working what am i supposed to do to make it work again ?
Use my providing lib replaces the original
Merrymustu said:
thank you mate, it is awesome
Edit- My wifi is not working what am i supposed to do to make it work again ?
Click to expand...
Click to collapse
Use my providing lib replaces the original
poppy22 said:
Use my providing lib replaces the original
Click to expand...
Click to collapse
i flashed the provided zip file through twrp recovery but the wifi still did not work. also tried replacing the lib modules manually via root explorer, wifi still is not working...
Merrymustu said:
i flashed the provided zip file through twrp recovery but the wifi still did not work. also tried replacing the lib modules manually via root explorer, wifi still is not working...
Click to expand...
Click to collapse
You can try this: for example you're flash luxandroid_v4 ROM, you replace me lib luxandroid_v4, and then use a TWRP Recovery flash
same here, I'm flashing now clean luxandroid v4, will report if it works
so here is what is exactly happening-
when i just flash boot.img from fastboot, nothing else, wifi stops working.
when i replaced lib modules from poppy22 zip wifi still was not working .
then i flashed flar2 kernel zip from recovery to replace modules
(original modules) wifi started working again but then the sweep2wake feature and other features of this kernel stopped working .
WiFi does not work mee ROM luxandroid v3.
Did you remove system r/w protection in this kernel? You should work with u-ra to get the kernel working on CM rom.
Sent from my HTC One S using xda app-developers app
qzem said:
Did you remove system r/w protection in this kernel? You should work with u-ra to get the kernel working on CM rom.
Sent from my HTC One S using xda app-developers app
Click to expand...
Click to collapse
+1
Sent from my HTC One S using XDA Premium HD app
s0kY said:
+1
Sent from my HTC One S using XDA Premium HD app
Click to expand...
Click to collapse
+2
qzem said:
Did you remove system r/w protection in this kernel? You should work with u-ra to get the kernel working on CM rom.
Sent from my HTC One S using xda app-developers app
Click to expand...
Click to collapse
Yes, remove system r/w protection in this kernel
some nice development is going on here ,nice work man
+1 from me
have you done something about the wifi issue ? wifi does not work no matter what.
Merrymustu said:
have you done something about the wifi issue ? wifi does not work no matter what.
Click to expand...
Click to collapse
Have tried first flasihg the zip file in the recovery, then you should use fastboot to flash boot.img (kernel)? Because there are modules for wifi in the zip file.
New?
qzem said:
Have tried first flasihg the zip file in the recovery, then you should use fastboot to flash onl boot.img (kernel)? Because there are modules for wifi in the zip file.
Click to expand...
Click to collapse
Is this not the standard procedure?
mmasic said:
Is this not the standard procedure?
Click to expand...
Click to collapse
Yes it is but in first post poppy only writes that you have to flash only boot.img in the fastboot mode, he is not writing about flashing zip file trough recovery first. And a lot of user are simply following his directions. So I thought that he might didn't try the proper way.
Wi-Fi work
system>lib and delete modules files with root browser , rom toolbox vb...
and
copy poppy modules. system>lib paste poppy modules :good:
Thank you poppy22

[ROM][5.1.1][N750] Fully deodexed ➡bugsfree,fast,stable⬅ COMBO ROM

Hello friends , Are you waiting for a bugsfree, fast and most stable rom for our device.... then here it is.....
➡COMBO ROM⬅
It has following features :-
FULLY DEODEXED - NO BLOATWARES to make it light...
TWEAKED KERNEL - various tweaks are added to Kernel to make it SUPERFAST, enhance battery performance, and much more....
NO BUGS - like CM12.1 has touchscreen issues..
NoteRom has signal issues...
BASED ON STOCK ROM - original appears best
PRE BUILT ROOT : you just have to flash a zip file..
PRE BUILT XPOSED : Just install xposed apk. Binary is already present..
Download link for ROM : https://drive.google.com/file/d/0B97_mvaRURo-U29yS2F4RkxXa2s/view?usp=drivesdk
Download link for superSU: https://drive.google.com/file/d/0B97_mvaRURo-bnEwRkE5WHB5RE0/view?usp=drivesdk
Special thanks to @Amit.A
INSTALLATION :-
1. download the .zip file and extract .
2. Reboot to recovery and make a small backup ..
3. Replace the files in the recovery backup folder with the rom files..
4. Reboot to recovery and got to restore and flash ..
ENJOY ..
Screenshot please...
Screenshots..
Info

			
				
some more screenshots please! the rom looks awesome
i installed the rom today. looks mostly like the ultralite rom i used before.
hope there are no bugs as mentioned. thanks!
Sorry I posted here first without reading instruction and thank u for the rom
Thanks a ton for this lovely Original ROM
RG
INSTALLATION :-
1. download the .zip file and extract .
2. Reboot to recovery and make a small backup ..
3. Replace the files in the recovery backup folder with the rom files..
4. Reboot to recovery and got to restore and flash ..
ENJOY ..[/QUOTE]
Can we direct restore rom.No need to wipe first??
Hey bro. Can you make it for n7505 variant? Thanks
Lelonio said:
Hey bro. Can you make it for n7505 variant? Thanks
Click to expand...
Click to collapse
Sorry but I don't have n7505 variant...
But its easy, you can make it on your own ... Just follow these steps..
1. Download and flash note5 noble Rom.
2. Backup its boot img.
3. Download original lollipop Rom for your device and flash it through odin..
4. Flash twrp recovery again and then root it and remove/uninstall unwanted system apps...
5. Flash the backup boot img.
ENJOY
i want to install xposed... which type exposed can be install
mayoryusa said:
i want to install xposed... which type exposed can be install
Click to expand...
Click to collapse
Just install the xposed installer apk..
How is this ROM different/better from @Amit.A ROM
[ROM][5.1.1][NOTE5][SM-N750][N7505][Deodexed]?NoteRom
Also, I am currently running this above mentioned ROM but I am hardly getting 1 signal bar strength most of the time which is very frustrating. Have you fixed it in this ROM bro? Thumbs up for your good work, please reply ASAP so I can install your ROM.
Danniel.D said:
How is this ROM different/better from @Amit.A ROM
[ROM][5.1.1][NOTE5][SM-N750][N7505][Deodexed]?NoteRom
Also, I am currently running this above mentioned ROM but I am hardly getting 1 signal bar strength most of the time which is very frustrating. Have you fixed it in this ROM bro? Thumbs up for your good work, please reply ASAP so I can install your ROM.
Click to expand...
Click to collapse
Yupp ! I tried my best !
Hope it will fix your problem
ravichaudhary133 said:
Sorry but I don't have n7505 variant...
But its easy, you can make it on your own ... Just follow these steps..
1. Download and flash note5 noble Rom.
2. Backup its boot img.
3. Download original lollipop Rom for your device and flash it through odin..
4. Flash twrp recovery again and then root it and remove/uninstall unwanted system apps...
5. Flash the backup boot img.
ENJOY
Click to expand...
Click to collapse
Am I stupid or will this end in a stock ROM (although rooted) with only the boot.img different if I don't remove any "system apps" ?
So is this "ROM" single difference with stock is we can remove what we want ? Can we do it also once we've restored the Note/Noble boot.img ? This would be great, along with the fact to stick close to stock gives more chances to be bugs free isn't it ?
Please tell me (I'm newb and non-english easy), what does "combo"ROM stand for ?
Thanks
1stStep said:
Am I stupid or will this end in a stock ROM (although rooted) with only the boot.img different if I don't remove any "system apps" ?
So is this "ROM" single difference with stock is we can remove what we want ? Can we do it also once we've restored the Note/Noble boot.img ? This would be great, along with the fact to stick close to stock gives more chances to be bugs free isn't it ?
Please tell me (I'm newb and non-english easy), what does "combo"ROM stand for ?
Thanks
Click to expand...
Click to collapse
Yes you are right in that this ROM is different from stock in boot.img. But this ROM is different from stock in having no bloatwares and few other patches..
"COMBO" here means this ROM is combination of Noble and Stock ROM
How is it possible that said "patches" would survive to stock reflash. These aren't in boot.img (this is the way you say to install : just install to backup boot.img then erase all with stock and restore boot.img backup). Wouldn't it be simpler to just distribute the tweaked boot.img then only flash this one ?
More, above, about 7505 you say "it's easy" to make it. But where is Noble for 7505 ? It is no more available. In fact this is my main problem to give try to your pragmatic way
Query for rooting Samsung note 3 neo ...
Can you please elaborate step 2 ... I have reboot to recovery. What do you mean by make small backup? Where and How to make it ?

Categories

Resources