Related
Hi, I am a relative newbie to ROM flashing and the like. Additionally I dont have a very deep computer knowledge base. I have rooted my Samsung Captivate and have flashed a ROM (which flashed properly, but didn't quite work). I have three questions about ROM usage and such:
1. I know kernels basically add aspects to the ROM you are running, but when should you flash these? How do you flash them (same process as with ROMs? do you just do it over-top of the Rom you currently have loaded? etc...)
2. If a newer version of the ROM you have running comes out, do you have to start over and completely wipe the device over again and do the whole process from start, or can you load a newer version of your current ROM over the one you have?
3. I have been hearing/reading about some problems with the Android Market disappearing on certain ROMs when the market updates, how can i avoid this/fix this?
Thanks. Sorry the basic/stupid questions.
1. Yes
2. There are WIPE versions and NO WIPE version. Usually you can use the NO WIPE version and keep everything. But sometimes if the roms are too different you get problems and errors, then it is recommended to flash a WIPE version.
3. Hm did not experience this yet, but there are fixes somewhere .
Whats up... No question is a stupid one buddy.... (Sometimes )
To answer your first question about kernels. Flashing kernels aren't a must. You don't have to flash them really, unless there is a need. Kernels for the most part can often change the way Android handles stuff like memory management, battery resources and even multitasking. They change (tweak) the way the Android OS itself interacts with the phones hardware. That's all a kernel is really. So read up on them before flashing them because each has their advantages and disadvantages. For example, the kernel I use gives me a good RAM boost and much better battery life but it suffers on the multitasking side and I have to do other stuff to compensate for that. That's how it is. As far as flashing them is concerned. That depends. Usually, you just flash them through recovery (Like a ROM) but I would suggest you follow the instructions they give you (if it exists).
Your second question is simple. Just follow the instructions they give you for installation. Some ROMS require a full wipe and others don't. It just depends on the ROM. When in doubt, follow the instructions (again if it exists).
Your third question is a weird one, I've never heard about that really. BUT.... Some ROMS may or may not include the GAPPS applications (Google Apps).
If the ROM you flash doesn't have Google Apps built in, it would literally be missing. You would have to flash it separately. Usually in those cases though, at the download location for that ROM, they would also provide links for GAPPS zip files to flash separately so you can have the option to go with Android Market, Gmail and such OR you can use an alternative. Short of that..... never heard of that issue before..... If the issue is happening after the Market app updates, in that case it might be some type of ROM issue, you'll probably have to somehow get the updated Vending.apk (Android Market) remove/backup the original and reinstall it manually (the way you would a regular apk). I'm guessing though....
Don't you just love research........
Thanks. And now, inevitably, answers lead to more questions.
With regards to kernels, how do I know which one's do what, are compatible with which ROMs etc. I feel like its the kinda thing that needs a giant database for them, but i know there isn't.
Also, is the process for flashing other .zip files the same (though either Rom manager or a built in Recovery option). For example, a bootanimation.zip?
Ultimately I hate the idea of asking overly simply questions, but I just don't know what I dont know, nor what is supposedly implied. Thanks.
Don't sweat it...... I'm in the same boat so I have no hangups....
I think I know what you mean when it comes to kernels. Ultimately, learning about kernels requires a lot of reading in many forums (Just like this one)... Why?.... Because in many instances the persons posting the kernels might not always give you an exact breakdown on exactly what it does..... so I understand. Your best bet would be scanning XDA. I've found all sorts of really excellent kernels lying around and the devs here love documentation so there is a good chance you'll know what it does...
You could also try DroidBasement: http://droidbasement.com/db-blog/
They actually have just what you wanted, a database....kind of. They have a very large variety of kernels for different devices so its a good place to start as well.
They also tend to do a breakdown of what each kernel is capable of, the device it should be used on and so on.
About flashing zip files. Generally speaking, most zip files are flashed through recovery but its not written in stone. Following the instructions concerning said zip files are always very important. Always look for instructions before you do so at least at first. In the case of bootanimation.zip.... They are not always flashable. But if it is flashable, you can flash it through recovery which would be the best method....
If you want though, you can replace the original bootanimation.zip file with the new one manually, once you have root and some type of root explorer (for example RootExplorer for Android).
Generally, the boot animation directory is usually, /System/Media so you can check to see if its there and if it is, just backup the original and replace it with the new one.... That should work... Always nandroid before doing so though.... before doing anything really....
Thanks. I actually had a question about nandroid but forgot. Basically, what is it. I realize contextually that it's a backup program and apparently works through the recovery menus. I read a ROM flashing step-by-step that mentioned it but couldnt figure out where to get it (not in the market unlike Ti-bu which i use currently).
Nandroid is a backup program that basically creates a flash image of your phone... If you've ever heard of "Ghosting" or "Imaging" a Hard Drive, its exactly the same thing.
Its really as good as it gets as far as data backup is concerned. Its also a low level backup, so even file structures would be recorded.. In other words, you can completely screw up your phone (file partitions everything!!!!) but once you can boot to recovery, your phone can be restored. That's why its so important because its your safety net....
Its not something that you can install like an apk, so its not in the market.
You would have to flash a custom recovery. If you have one already, it should be located in one of the menus (It changes depending on the type (brand) of recovery).
If you don't see the option in your recovery then its probably not custom and you're going to have to do some digging on these forums and maybe a bit of googling for instructions on exactly how to do so. Because it could change from device to device.
Nandroid also allows you to backup your sd-ext partition as well, so if you switch cards, you can restore to another card.... Its really incredibly handy and I wouldn't suggest you do anything until you can create nandroid backups....
Now, I'm having an interesting problem I posted this same thing in general Captivate forums but maybe someone who is looking at this/answering me knows. here's what i posted there:
have a Captivate that I recently flashed Di11i's 7.1.1 to, before that I had flashed my first ROM which was Serendipity 6.2. Both times I have found that I don't get incoming calls. People calling me get 2-3 rings, and then a traditional "busy signal" sound. On my end, either the phone vibrates once but the screen doesnt change from whatever screen I'm on. Or, The screen goes black like its going to the incoming call screen, but the black screens only flashes and goes away, as does a force close message box that goes away quickly without me clicking it.
Everything else on my phone works as far as I can tell, I've been running my current ROM for about 5 days without issues other than this one. This same exact problem also happened when I flashed Serendipity 6.2 (which I only kept for like a day because of this problem)
Ok....I currently use a G1 and most of my experience has been on HTC Devices. I'm not sure of how to reply to this as I have never really modded Samsung devices before. So I'm not really familiar with software and hardware differences (Like Bootloader, Recoveries, Radios and such). But based on what you're describing.... It sounds like a ROM or maybe a radio issue. Maybe its an issue with the phone app itself. If the app is somehow buggy then thats exactly what would happen. When the phone rings the phone app would try to run but then force close....
I'm guessing here, but it could also be a radio issue because you're getting a busy tone as well which is not good. Maybe the ROM requires a specific Radio version BEFORE its flashed.... Check the source of the download and determine if it requires a specific Radio version.
In my experience though, if the correct radio version isn't used for a ROM that requires it, the phone just won't boot..... but then again, I don't know what would happen on a Samsung Captivate.... Not sure if I can help on this one because I don't have any info on that type of hardware. I don't own one you see.....
What about if you found out a new kernel isn't as good as the old kernel, how would you go on to take away the new kernel to replace it with the old kernel? Is it the same process or even harder?
vlen22 said:
What about if you found out a new kernel isn't as good as the old kernel, how would you go on to take away the new kernel to replace it with the old kernel? Is it the same process or even harder?
Click to expand...
Click to collapse
NOW THIS IS ANNOYING..
u have to flash ur rom again..
but fortunately u dont need to do and wiping data or partitioning sd card.. jus flash rom..
Its not something that you can install like an apk, so its not in the market.
zeemar007 said:
NOW THIS IS ANNOYING..
u have to flash ur rom again..
but fortunately u dont need to do and wiping data or partitioning sd card.. jus flash rom..
Click to expand...
Click to collapse
The rom kernel that I downloaded, or flashing clockwork recovery mod? Like adrenylyne's kernel for the thunderbolt.
EDIT: Never mind, I found out. I didn't mean any harm if MY POST was annoying.
If you have two kernels, in a flashable zip, you can just flash them over each other to exchange them (turn off any modification the kernel did befor though, like lagfix).
New question, I had an app (quick office) that came on my captivate. Now that I've flashed di11i's 7.1 I don't have it anymore. This is particularly peculiar because all the other native apps are still here:samsungs media player from example. How do I go about getting this missing app back on my phone. I have all the backup files on my computer so I should have the .apk (although I'm not entirely sure how to install those properly) thanks
Sent from my SAMSUNG-SGH-I897 using XDA App
Hola peoples!!! Ok so I just thought I'd create my own thread on this matter. Mustangtim started one in apps and themes (and here is the link to that thread) but since I'm taking over this project it was brought to our attention that this should be in the dev section as its no longer just an app.. I am actually tearing .imgs apart trying to figure out what the deuce.
FIRST OFF THIS IS A WORK IN PROGRESS, WE ARE NOT YET FULLY SUPPORTED. HOWERVER I'M DOING MY BEST TO CHANGE THAT.
Secondly if you want to help get this started please visit the market and grab the app here. Its a $3 dollar app for unlimited amount of roms, based on your SD card storage capacity anyway. And speaking of which you need AT LEAST a class 4 or better SD card to make this run smoothly.
Also feel free to visit the forums at http://forum.init2winitapps.com/
Ok so here it is, Boot Manager Pro. Its been a long time coming for the g2x to dual boot. First off let me say long story short, I currently have a bootable SD Rom, known as ROM1. I have yet to be able to recreate my findings tho. But it works and it doesnt brick at all. However it is a bit laggy on my class 4 SD card. Luckily I've already done my research on this project as there are many threads of such awesome info so I'm just going to be lazy about it and quote the good people of xda versus re-writing it based off of their info.
ChrisDDD said:
So here's a very basic description of how it works... It doesn't partition your SD card, it just creates a folder of its own, and then sub-folders to hold the different roms you install. When you install a rom, it basically creates images of the usual Android partitions - system, data, cache, & boot. These are standard .img files, just like the ones Clockwork creates when you do a backup. After the images are created and wiped (formatted, which you should do initially) it installs your rom into these essentially the same way as Clockwork installs a rom to your phone's actual partitions. I assume it modifies the kernel that comes with each rom to mount the image files on the SD card instead of the phone's partitions.
When you want to boot a rom, it just replaces your current boot image with the modified one and restarts the phone. With the modified boot image, the system, data and cache images on the SD card are mounted to the correct locations and Android starts up none the wiser. The rom will initially run a little slow, because the SD card is slower than the internal memory, but after things get cached it speed up considerably.
When you want to reboot to another rom, or back to the phone's rom, Boot Manager again swaps boot images that mount the desired rom's partitions (in the case of the phone's rom) or files (in the case of an SD card installed rom).
When you first run Boot Manager, it makes a Clockwork flash able backup of your current boot image, which you can flash if a rom hangs or loops on startup. Alternatively, you can also simply boot into recovery and do an advanced restore, choosing just the boot image to restore from a backup. It accomplishes the exact same thing.
It can be a little hit or miss, with some roms just plain refusing to start through Boot Manager, but it does work and when it does, it's pretty amazing given what it's actually doing.
Click to expand...
Click to collapse
So basically upon installing the app you need to setup your phone so that way you can properly install a ROM, follow these steps:
1. Go into the supersu(or superuser app) and then go to settings then disable logging or click none.
2. Then go into the BMP app and press the menu button on your phone, not the app, and go to settings. Once in settings put a check mark in force large boot.img, screen on during install, and then go into variables, leave tegra alone but change the sdcard block to show mmcblk1p1. Then press finish and let the app restart. By the way I didnt change any of the sizes of the .imgs but feel free to do so. But be warned do not decrease the size of the system.img only increase it, if desired.
3.Then after you've done the above you need to setup the phone rom. Click on 'Setup Phone' under phone rom and follow that process to setup your phone rom.
4. Once your phone rom is setup you may begin to install a zip to rom1 or rom2 or whatever slot you want. This is the tricky part. I have done tons of reading and most people say that if your using CWM, which us g2x'ers do, then you will probably have a better chance of getting a bootable rom by restoring from a nandroid backup you did versus installing new.
5. So after you decide which path you will take, nandroid backup or fresh rom install, choose install. If you choose a fresh rom, wipe system, data, and cache right away. If nandroid, then wipe after the install.
6. Now once you have clicked install put your phone down, DONT MESS WITH YOUR PHONE AT ALL! PUT IT DOWN AND WALK AWAY OR SOMETHING! Don’t mess with it, text from it, xda from it, dont even use the screen as a mirror!!!! lol seriously the app is picky and while under the .img creation process you want nothing to mess that up or you will not get it booted. You may however drag down the notifications bar to follow the progress of the install.
7. Once its complete, tap the install complete notification in the notification bar and let the app do its thing to finalize the install and get you back to your rom selection screen. Now if you did a nandroid back up here is where you click 'manage slot' and then factory reset the backup you did. Just do it, dont ask why.
7.1 Also so if you desire to install gapps and/or possibly a different kernel, now would be the time to do so while your here. I have read mixed reviews of doing this process right after the rom installs. However when I set up my rom1, I booted into it first all happily then realized I had no gapps. So I had to reinstall BMP on rom1 then boot back to phone rom and then I installed GB gapps and had no issues booting back into rom1.
8. Once the above steps are done if your feelin lucky go ahead and tap on boot the rom you installed, and if all goes well it will boot up.
9. If it boots up you need to post confirmation here!!! Provided info such as phone rom and the info on the sd rom you used and slot number and such.
Hopefully it will just work for you. I have done all the above steps using HFP 2.1 as my phone rom and only been able to get 1 bootable rom. Being it was for testing I used HFP as my phone rom and as well as my rom1.
So if the above steps dont wortk out for you and your boot lopped or what ever, then turn your phone off and reboot into cwm. You have 2 options to resolve the boot issue you just created. 1, you may go to restore then advanced restore then restore your boot. Or 2. select install a zip and nav to the bootmanager folder then phone rom then flash the update zip there.. then reboot and you should be back at your phone rom.
Here is a basic run down of everything that I have done so far:
When I first started working on this project I wasn’t doing any dev'ing to change any of the stuff in the boot.img. I just changed settings in the app per all the research I did. So when all was said and done I restored HFP 2.1 to ROM1 and it actually booted!! And it works lovely btw.. I can still boot into this rom today. I then decided to pass the word and ways that I created the working rom1, well I nor anyone else I passed the info to was able to get it working. Only one other person was able to confirm that rom1 works but only after I copied all my rom1 info and sent it to him for testing.. and he was able to boot into my created rom1… As I see it, it was a blue moon event that I have yet to repeat. So I thought eff it lets do some dev'in so I unpacked the boot.img from rom1 then compared that to the unpacked boot.img from rom2 that I created in my trial and error experiences. So in doing so I noticed 4 differences; 1, the mount points obviously, 2, in the sbin folder had a ueventd file from the working rom1 was a text file viewable by gedit in ubuntu. In rom2 it was just a non-readable file. 3, in the init.rc file was also missing a chmod command for system, (the command is in rom1 but not rom2) and 4, there was a ueventd.tegra file that was in rom1 that wasn’t in rom2, but everything else is the same. So I decided to plug and play with the differences to see if she boots and no go. I don’t understand why its boot looping because I am using the same rom as phone rom as for rom1 and rom2. So it boot looped. So I had to restore my boot.img many times in cwm.
So then I said eff it lets do some more research, then I noticed in the .zips folder plus the individual rom folder there are .zips that will let you flash via cwm if you get boot loops and 'should' get you booting to your desired sdrom. I then tried that way and no go.. so then I opened up the zip and had a look at the internals.. first there is the moveboot.sh file that the app runs in cwm flash the given boot.img. I then checked out the meta-inf and opened up the updater-script thinking that the app wasn’t actually flashing the boot.img which is why it loops... Well I think im half way right. However the script itself is lil dodgy... first thing I noticed was at the end of the script they have a command to cp the log from /tmp to /sdcard/bootmanager well the command was wrong so it never copied the log. So I fixed that. I also saw that the assert command was pointing to ‘boot’ instead of mmcblk0p5, so I changed that too. Then I decided to do away with the assert command and the moveboot.sh file they have going on to utilize the same functions that the kernel zips use, which is a kernel folder that holds the boot.img and a run_program that dd's the boot.img to 0p5. plus I even updated the update-binary that the file uses. I used the one from the g2x nullifier as I know that one was made for our phone and should have no issues.. plus there was a noticeable difference in the sizes of the provided binary to that replaced binary. So with the updated.zip file I then rebooted into cwm to flash that being that I was using a different command to flash the boot.img as well as the other changed stuff and still it boot looped. So as of now the only thing I don’t think ive done was grab the boot.img from rom1 then change the mount points, only change that, and then use that for rom2 and see if it boots. I don’t think I’ve done that yet. But every dam process I do I get boot loops. So basically I have came to the conclusion that it’s now NOT a boot.img issue being that I have done everything to change the boot.img and to make sure it flashes, which it does indeed and now creates the log too… I think maybe it has issues with the system.img as that’s what comes next in the boot process. But that’s just my hypothesis. I won’t be able to confirm this till I liberate rom1’s boot.img then change the mount points to point to rom2 and then see if it boots.. if it don’t work then that would mean to me that there is an issue with system.img created. But that’s just my hypothesis…
What I don’t understand is why the eff when I didnt hack the app I got a working sd-rom, but when I do change some stuff with it still don’t work!!???!! I guess maybe ill just edit/hack the apk to see what’s up.. This is getting way more complicated than it needs to be, since it worked prior to all my major changes to the script its using for flashing and the boot.img and what not. Anyone have any ideas feel free to add them.
My next steps are to edit rom1 boot.img one last time to change the mount points to point to rom2 and then if that’s a no go then it’s got to be the system.img that’s getting created. By the way this whole process I have only been restoring my nandroid backup for HFP 2.1. I have not attempted to flash new as with thru my research more times than not people would get a bootable rom via restoring versus flashing new.. so if anyone wishes to experience an sd rom let me know, ill send you a link to download my rom1 to get it going. Mind you that its not perfect and you need a class 4 or better sdcard. Everything works but it just takes a bit longer to load things and get things cached as its on the sdcard and not nand. Also if you have any input or are wishing to help pm me I need more heads to get this sorted as I can’t be the only one who knows how to edit scripts and unpack imgs and such. Either way I will continue to do this until I get it right damit!!! Oh and I just ordered a class 10 sdcard to help with this process…
That was copied from the other thread that mustangtim started. Last night when I went home the first thing I did was change the mount points on rom1 to reflect rom2, I changed nada else, then I tried to boot it... it boot looped. So maybe its a permissions issue or the system.img.
So just as a proof of concept and before anyone calls bs on my work/findings Here is the link to my rom1 that boots and is HFP2.1. *Update, 'm just going to
leave it on my DB for now till I find something better I guess. xda wont let me attach the file since its 233MB. Oh well here is the link :
Code:
[URL="http://db.tt/eBZwrOrs"][U][B]Here it is, my Rom1 HFP 2.1[/B][/U][/URL].
I have also attached my updated script file to flash back to rom1, for now.
The boot.img points to rom1 instead of phone rom, ill add to phone rom
as well, just not the now. :) Feel free to flash this via cwm versus
restoring...
Also this is part of the this: the ‘.zips’ folder you need to replace the file in
that folder as well. It’s an update file for rom1 to flash the boot.img.
..
If you’re going to use this you need install a random rom to rom1 then replace those created files in rom1 with these files in the 7z file..
So I am doing this new thread to get the devs or people with know how to help me out with my findings. I have edited the boot.img so much I could pretty much re-write everything in there by now including using magic to create to my own kernel eff!! lol jk but seriously I need people with knowhow to provide confirmation of go or no go. Basically I have people whom have helped out but It seems that I'm the only one who has dug this far into this app(unless i've been misinformed) and I have no one on my level to talk with except the init2winit devs. Which are very helpful btw.
And lastly:
Conap said:
Guys if it's failing to make the boot.img first make sure your using the market version....others have released cracked versions of our app which they broke...if your using the actual market version just send me a pm or email [email protected] and send your log.txt from BootManager folder on sdcard and we'll get it straightened out. Thanks.
Click to expand...
Click to collapse
or post here or PM me, I'm always down to help out.
Also thanks go to the init2win team, Gflam and Conap as they started this app. and as well to Mustangtim as he brought me into the light of BMP.
So you got all that???!!!??? Now lets get this party started and get full support for dual booting. I will not rest until I get this working. Thanks for your time and possible assistance.
Ok so since I have a book above I thought this is a good place for links and such...
So just incase anyone is curious, here is the Official Boot Manager Manual
Here is a nice link for Tips and Tricks while Installing ROM's that so far has good info to help you watch via adb what the BMP is doing in its creation process.
Some FAQs:
When should I set up my phone ROM?
Set up your phone ROM EVERYTIME you install a new ROM to your phone so you can get back to your phone ROM and won't get stuck on your SD ROM.
My SD ROM seems to lag how can I fix this?
SD ROM lagging may be due to a few things which all have easy fixes. First fix is that most of you have class 2 cards which are what usually come with your phones. These have a much lower read/write then cards of a higher class, we recommend a class 6 card or above. Another easy solution is overclocking merely install a better kernel and use CPU Boost (or any other overclock app) to overclock your phone.
Can I nandroid my SD ROM slots?
Yes and no you can't nandroid them in the traditional sense of the word using recovery but this app works as a recovery for your SD ROM slots and you can back up your ROM slots within the app in the Manage Installed ROMs section which works as a nandroid for your slots by fully backing up your slots to your sdcard which can later be restored.
What if I want to change the sizes of my images, how may I determine the individual sizes easily?
Easiest way is to open up terminal emulator in your app drawer. Type 'su', then grant permissions if need be, then type 'df -h' and it will display such information. You may also use adb in the same fashion. Connect via usb, open up command prompt/terminal and get adb connected and then type 'df - h' again and the same info will show. I will say this again just because, do not decrease the size of your system.img ever! Unless you want mad issues!
Here is the changlog link and just for heck of it the info based on that link:
Code:
V3.2.6
Fixed DroidX/Droid2 Install issue
Fixed UI theme issues
Fixed issue with spaces in name of pic when selecting photo for screen shot
V3.2.5
Fix to allow continue of install if no boot.img is found.
V3.2.4
Added support for HTC Rezound
Added support for rom's with multiple boot.img's
Added support for rom's made for multiple phones
AutoDetect sdcard for usb mounting
Fix for installing ICS gapps
Optimized SDRom Install process
Added support for Motorola RAZR
Added install queue
V3.2.3
Fixed issues with rom's not showing when on emmc on Droid Incredible
Fixed issues with not showing correct booted rom in app
More improvements to sms sync(all rom's will need updated app for changes to apply)
Fix issues with loader
Fixed issue with switching to backup server when main server goes down
Fixed 1x1 widget to show unlimited rom slots
Added 2x2 widget that works with unlimited rom slots
V3.2.2
Fixed force close for img's over 1Gb when resizing
Fixed current booted rom displaying correctly on gnex
Fixed issue with wrong busybox downloading on gnex which should fix alot of install/boot issues
V3.2.1
Fix for errors causing installs to fail.
Fix for some of the licensing stuff.
Removed sdbooster prefs from Galaxy Nexus(Since they don't have sdcard).
V3.2
Changed 4 sd slots to infinite slots!
Galaxy Nexus Support
Sms and Call Log synced between ROMs (you choose what ones too also requries updating boot manager in all slots)
License Check extended to a week
ROMs do not need market installed for boot manager to run (requires updating boot manager in all slots)
Hide su toasts (superuser elite only)
Fix for force close when setting screen shot in MIUI rom's
Thunderbolt defaulted to force large boot.img
Fixed unsupported device using a key
Manually setting variables only accepts numbers
V3.1.1
Fix for various force closes in rom installs and Nand restores
V3.1
Added su binary check
User selectable colors for everything
Better navigation (press title for quick action)
Added compatability for new twrp backups
Better compatiblitlity with memory tweak scripts(i.e. supercharger script and liquids default scripts)
Fix for install process being killed by android
Fix for some themes erasing img's
Fix more force closes during install
Force smaller boot.img option in settings(Fix for some phone's who's boot.img won't fit on the phone after BootManager edit's it)
Improved gapps checker
Improved security
Boot Manager now accepts keys pay for by paypal (see http://init2winitapps.com/stories/BootManager.html)
Added Evo 3d GSM Support
Added notifcation sound/vibrate for finished install (turn on in settings)
Improved data check
V3.0.3
Fix some force closes
V3.0.2
Added backup server (Sorry our server dropped out)
Fixed some force closes
2nd init fixes for Liquid's ROMs
V3.0.1
Last minute UI fixes
V3.0
UI Completely redone
Includes screen shot of each slot
Custom Info
Custom Dialogs
Custom Animations
Custom everything!
Bug Fixes
Added Droid 2 Global support
Screen shot with long press of search
V2.2.1
Bug fixes in file browsers
File browsers only show relevent files
Kernel installer fix
Droid 2 bug fix
V2.2
New security (more advanced and requires data only once a day)
Installs no longer require data
Added Italian translation thanks Black-Ice
Droid X support
Droid 2 support
Fixed status bar notifications
Fixed phone rom rebooter if gapps aren't installed
Bug fixes
V2.1
Restore android_secure to sd from nandroids
Added TWRP nandroid support
Added CWM tar nandroid support
Added Spanish translation
Made widgets easier to use
SD Booster added (Change SD read cache for better preformance)
Added current settings to manually set variables.
Added option to keep screen on during install in settings
Fixed usb layout
Updated Security
Bug Fixes
V2.0
Install now runs from the foreground (status bar)
Restore Nandroids to slots also in the foreground
User can cancel installs as they run
4 new themes added including one by apophis9283
Some phones such as tb moved to new install code (Fix for some sense rom's)
V1.3
Added third theme to app (Red Theme)
Added 4x1 widget and new widget styling
Fixed in app messenger
Added support for Htc Evo 3D
Added support for Htc Sensation
Added Support for Htc Incredible 2
Added Support for Htc Incredible S
Added Support for Htc Desire S
Added support for LG Ally
V1.2
Added option to reboot to phone rom to install gapps in license check dialog
Better error checking and error logging
Automatically install's ext2 libs if not present
Moved Set Names to Manage rom's
Fix for add-on's not installing correctly
Better compatiblility for rom's that use data2ext or apps2sd(user must set larger img's in manual variables)
Trash cleaner added to extras
Better Fix for WiFi issues on Droid 1
Added display to show what rom you are booted into
Fix for updater-script not found errors
Added support for Htc NexusOne
Added support for Htc MyTouch4G
More compatiblity for ext4 support
V1.1
Fix WiFi issues on Droid 1
Fix bug in rom installer for setting permissions correctly
Fix bug for cache size not setting correctly in setting variables manually
Fix for decimals entered into partition sizes causing force close
Fix force close in widget
Fix force closes in installer
Added Wipe data/Factory reset to Manage Rom's section
Added code to show what file's are being unzipped in dialog
Added support for rom's that extract files to sdcard so the files actually end up on your sdcard
Added support for Htc Desire (apps2sd and data2sd rom's support is experimental. Please email if you test it and it works/doesn't work)
Added support for Htc Inspire4g
Added support for Htc DesireHD
Added option to use ext4 filesystem if rom's support it-Experimental Won't work with all rom's.
Added log.txt file to sdcard to log errors during install
V1.0
Initial Release
YEZZZ
glad to finally see this here!
jookdakang23 said:
glad to finally see this here!
Click to expand...
Click to collapse
indeed... hopefully it wont be before too long that I get this app fully supported for us!
This app will be extremely useful for G2X owners and makes the G2X more versatile and desirable.
da-pharoah said:
indeed... hopefully it wont be before too long that I get this app fully supported for us!
Click to expand...
Click to collapse
idk how you get it booted. lol i keep getting bootloops
jookdakang23 said:
idk how you get it booted. lol i keep getting bootloops
Click to expand...
Click to collapse
Are you using the files I supplied or the ones that BMP created for you?
Woo hoo good job bud
Sent from my LG-P999 using xda premium
x0xhellx0x said:
Woo hoo good job bud
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
LOL thanks bro.... Go Team Hellfire!!!!
da-pharoah said:
Are you using the files I supplied or the ones that BMP created for you?
Click to expand...
Click to collapse
i remember requesting the files but think you ever sent them
jookdakang23 said:
i remember requesting the files but think you ever sent them
Click to expand...
Click to collapse
no we had a miscommunication due to our avail times and GB's lacking ability to utilize two accounts on gtalk.... I have posted those files in the op however...
First, I want to thank everyone who has helped with us on this app. Second, I know I picked the right man for the job, did you see that OP! All kidding aside, a lot of you know I write for ACS under screen name artifintel. I just had too much on my plate to give this project the attention and direction it needs. The right guy is in charge, he's a stand up person and very knowledgeable with this app. Good luck everyone!
[email protected]
I tried installing CM9, it didnt work, stuck on first boot screen after the LG logo.
I'm using rooted stock 2.3.4
Rafase282 said:
I tried installing CM9, it didnt work, stuck on first boot screen after the LG logo.
I'm using rooted stock 2.3.4
Click to expand...
Click to collapse
what rom are using as phone rom? and you installed to rom1?
da-pharoah said:
what rom are using as phone rom? and you installed to rom1?
Click to expand...
Click to collapse
As phone rom i;m using rooted stock 2.3.4 v21y
The to rom1 I installed CM9 kang from oiwan with gapps and harsh kernel
Rafase282 said:
As phone rom i;m using rooted stock 2.3.4 v21y
The to rom1 I installed CM9 kang from oiwan with gapps and harsh kernel
Click to expand...
Click to collapse
and no bootloop you say?? well then it may be the stock rom your using... The app is very picky and if you get a bootloop, I feel that those can get booted with tweaks... but stuck on lg screen is just no bueno.. Try a different rom... maybe one that has its partitions at ext3 format just to try it.. I think owains rom uses ext4, but I could be wrong. I havent fully researched his rom yet..
hands down, a badass app...
SiL3nTKiLL said:
hands down, a badass app...
Click to expand...
Click to collapse
lol +1 for sure!
da-pharoah said:
I think owains rom uses ext4, but I could be wrong. I havent fully researched his rom yet..
Click to expand...
Click to collapse
positive on ext4
I made a clean ROM based on the factory ROM for the Lenovo A789, A660 and P700i
Cleaned up ROMs:
- A789_S227_cybermaus_V2 (below)
- A789_S228_cybermaus_V2.1 (further below)
Ported ROMs (ported from P700i):
- A789_ROW_S105_cybermaus_ICS_V3 (further below)
- A789_ROW_S106_cybermaus_ICS_V3.1 (Further below)(also for A660 and P700i)
- A789_ROW_S107_cybermaus_ICS_V3.2 (Further below)(also for A660 and P700i)
The current and advised rom to use is A789_ROW_S106_cybermaus_ICS_V3.21
Based on factory ROM A789_S227_120827, and located in my Dev-Host. It is as close to factory as possible, which I hope will be good for stability. It is a flash-utility ROM, because it also holds the latest preloader, uboot and recovery. Assuming those are OK, followup fixes will be update.zip style.
Summery of changes:
- Rooted the phone with Chainfire SuperSu
- Set to boot in US-english, changed name of ROM
- Added MoreLocale for extra languages in 3rd party apps
- Removed Chinese apps, incl Chinese keyboard, removed SmsReg.apk
- Left Lenovo Security (anti-malware) and Lenovo (Go) Launcher intact
- Added Google GAPPS, Play Store, Maps, etc
- Added MobileUncle toolbox, SManager (root explorer). Titanium backup (free version)
- Added fix for location services
- Added CWMT recovery image (modded from 593cn.com)
- Added Skype, Whatsapp, and some others, as auto-install into userdata upon wipe
- Prepared busybox (you need to run script /system/xbin/installbusybox as root if you want it)
- Replaced bootup animation with clean Lenovo butterfly
- Replaced all some audio files with english named ones (thanks mabuc)
- Caller ID bug still present, sorry
- Just as a reminder, these ROMS have English and Chinese only.
Instructions:
By default, the ROM will not overwrite USERDATA or FAT. If you want a clean slate, first extract empty.userdata.rar and/or empty.fat.rar
- Read bgcngm flash tutorial.
- Read it again
- Start Flash Tool (v3.1222, in my Dev-Host)
- Load scatter file
- Take out USB cable and replace battery
- Press the download button in the flash tool
- Connect the USB cable
- Wait for the flashing to complete
A789_S228_cybermaus_V2.1 (no longer current, Use V3 instead)
Based on factory ROM A789_S228_120913, and located in my Dev-Host. Similar to V2, but newer, and a few extra fixes. It should be noted that the S228 is listed to solve unexpected crashes, so an important update in itself.
I do not have a A789, so it is a blind build. Until I get positive feedback, consider untested. Don't be the first to try if you are not experienced.
Summery of changes:
- Same as on V2, and additional
- Removed 2 more chinese apps that I forgot last time
- Prepared busybox (you need to run script /system/xbin/installbusybox as root if you want it)
- Added a tweak so USB-Debug notification is no longer shown
- Added a tweak so Wifi works on all 14 international channels (rather than only the 11 US ones, may be undone if you set a different locale)
Instructions:
This is a update.zip type ROM. So you need the custom recovery, see post #3,
A789_ROW_S105_cybermaus_ICS_v3.03
Based on P700i_ROW_S105_120920, see this separate post.
A789_ROW_S106_cybermaus_ICS_v3.11
Based on P700i_ROW_S106_121001, see this separate post.
Please note that this ROM I also build for the P700i and A660. See same post.
A789_ROW_S107_cybermaus_ICS_v3.2
Based on P700i_ROW_S107_121221, see this separate post.
Please note that this ROM I also build for the P700i and A660. See same post.
Below:
Post #2: Small review and fix of location services
Post #3: Custom recovery image
Post #4: Root your phone / install GAPPS
Also, many issues for the A789 are similar to those of the A750, so if you have questions, do search that Lenovo A750 thread to.
Thanks
Also thanks to bgcngm for his help, and to jazzor for his help
=================
BTW: Due to new forum rules, resulting in a large number of people that cannot post into developer threads and that subsequently PM me, I open op a new Q&A thread.
I am not going to be policing, so you can post where you like, but I invite everyone to use this new thread for any Q&A, and this thread for ROM releases and deep development talk only.
Consequently, if you PM'ed me, look for your reply in this new thread
Thanks
====================
PS: do drop me a reply if you use or tried it! Or press the 'thanks' button.
So, I got my first glimps at the A789. So to speak. My colleague was holding it while we were audio-skype, so I did not actually see it.
His A789 came with a Etotalk ROM by Dean, which I now suspect is a reworked Smileyvvv ROM with Sony Experia interface. Not bad, but as you know, I am a 'factory ROM' guy. My colleague may also be, because he had already replaced the the SE launcher with GO Launcher, which is the default Lenovo one. Also my colleague said it jammed a few times, which it still has not done on my factory A750 ROM.
Most of the phone worked, but a few tips for others out there:
- The phone still has the Called-ID bug. Even though it is newer 4.0,4. I know some of you claim this is solved on ICS Mediatek, but I still claim it is solved in *some* of the cases, not all, it also depends on how your provider sends the caller ID info. Anyway, you can work around it with the prefixer app as reported before.
- It did not come with the MobileUncle tool, but with the Etotalk tool. Which was not updated for the new MT6577 chip, so it had no Engineer Mode. Install the latest MU tool (version 20120813v2.2.0 its in my Dev-Host), so you get one with MT6577 Engineer mode.
- Recovery Mode was hard to get into. Like the newest A750 preloader, you have to press the power putton *just before* you press both volume buttons. But it did came with the CWMR Touch, though its Touch function was broken, so buttons only. They probably simply tried recovery images of other models, and did not properly build one with the A789 kernel, but it does not matter, it works well enough.
- Location services did not work. Update the phone with the ICS_locationfix_v1.3 update using recovery mode. While you are in recovery, also wipe cache. And finally, go into MobileUncle tool, the MTK Engineer mode, and in location settings, change the NetLoc from MEDIATEK to GOOGLE. Now your location services should work.
Lenovo A789 Recovery
I created a recovery image for the Lenovo A789 based on ClockWorkMod Touch 5.5.0.4. However, I do not own a A789, so until I have reports of it working, consider it untested. You can download it from my Dev-Host: File A789_S22x_recovery_cybermaus.rar
NOTE: It has come to my attention this recovery works well, except the nandroid backup function, which is broken. If you value nandroid backup, install the APKHOT one below.
While doing this, I also found a full APKHOT distro which had what seems to be a CLockWorkMod (non-Touch) recovery in it, so I extracted that and also uploaded it. That too you can download from my Dev-Host: File A789_S22x_recovery_apkhot.rar
Both of them you will have to flash using the flash tool, using bgcngm's excellent manual, and the V3.1222 of the flash utilities and drivers, also in my Dev-Host. If you flashed my V2 ROM, you do not need to do this, as the recovery is already part of that.
Once you have the recovery installed, you can enter it by pressing both VolumeUp/Down while booting the phone. Due to an issue with the preloader, it may be needed to press the power button slightly before both volume buttons. If the phone seems stuck, it means the preloader messed up, remove battery and try again.
Inside the recovery (the Touch variant) you can navigate not only by its physical buttons, but also by screen buttons, and by gestures: swipe up/down for up/down, left for back and right for enter.
The first few people using this, please report your findings, good or bad.
PS: As alwasy, thanks to bgcngm for his unpack utilities, which I used to modify the recovery.img
Lenovo A789 Root; GAPPS, Location DIY
Its been mentioned before, but if you have a working recovery (like above, hopefully), you can always yourself root your phone. Simply install (from inside the recovery) chainfire's "CMW installable ZIP"
Link to his post: (ignore his big red requires root warning)
The file you need is labeled "CWM installable ZIP" at the bottom.
Direct link to the file you need to install via recovery update.zip
And while you are at it: You probably also want to install the latest Google Mobile Services (better known as GAPPS) from CyanogenMod V9:
Explaining wiki from CyanogenMod
The file you need is called gapps-ics-20120429-signed.zip and can be found here
You probably also want to wipe your cache partition after doing this.
To complete this DIY of fixing factory ROM: On Chine phone typically the location services do not work. Update the phone with my A750 V1.3 update using recovery mode. (it works on the A789 because it is a minor update, but *DO NOT* any of the other A750 updates on the A789. I repeat, do *NOT* flash A750 on A789). While you are in recovery, also wipe cache. And finally, go into MobileUncle tool, the MTK Engineer mode, and in location settings, change the NetLoc from MEDIATEK to GOOGLE. Now your location services should work.
Good luck
PS: If either update.zip refuses to install, remember to turn off the checksum and assert checks in the recovery.
And thanks to Chainfire for his work, and the team at CyanogenMod for theirs.
cybermaus said:
Before I can help, please provide some info:
Can you tell me what ROM you have?
Which flash tools did you use to root?
Also, do you have a working recovery?
Click to expand...
Click to collapse
hwonggc said:
I fix the proximity thingy. it's caused by my lousy screen protector. But i've got another bigger problem now. I've accidentally uninstalled the default system home screen. I cant assess anything now. I tried flashing a recovery inside but it still doesn't work as factory. I use SP flash tool v3.1.222.00
---------- Post added at 06:32 AM ---------- Previous post was at 06:18 AM ----------
dont think my recovery is working. Could you please provide me with a working recovery? =(
Click to expand...
Click to collapse
Yes, a recovery is on the todo.
But for now, you did not answer my questions yet:
- Can you tell me what ROM you have? Or had. Original Lenovo Factory, Etotalk-Dean, some other?
- Which flash tools did you use to root? Or rather, which files did you flash using that tool to deal with root. Actually, the fact that you had to root it yourself probably means you had factory ROM, but please confirm.
As stated, I am uploading S221 original to my Dev-Host. Flash that with the flash tool. On short notice, that is all I can do. On longer notice, I will help you, but give me some time.
Edit: In fact: You you already have messed up your recovery, and I do not have a A789 to play with myself, you may be my guinea pig for the recovery build. So I will work on that today. (as today is not a working day for me anyway). If you do not mind being a tester. After all, the damage is already done, and you apparently already know how to flash using the utility.
EDIT: @ hwonggc : Please test recovery in post#3. Just update your post below with results, or PM me. I would like to avoid too many new posts on this while we are testing.
cybermaus said:
Yes, a recovery is on the todo.
But for now, you did not answer my questions yet:
- Can you tell me what ROM you have? Or had. Original Lenovo Factory, Etotalk-Dean, some other?
- Which flash tools did you use to root? Or rather, which files did you flash using that tool to deal with root. Actually, the fact that you had to root it yourself probably means you had factory ROM, but please confirm.
As stated, I am uploading S221 original to my 4Shared. Flash that with the flash tool. On short notice, that is all I can do. On longer notice, I will help you, but give me some time.
Edit: In fact: You you already have messed up your recovery, and I do not have a A789 to play with myself, you may be my guinea pig for the recovery build. So I will work on that today. (as today is not a working day for me anyway). If you do not mind being a tester. After all, the damage is already done, and you apparently already know how to flash using the utility.
Click to expand...
Click to collapse
Yes yes. I had the factory rom. I got the phone just yesterday evening and this afternoon it's half dead already. I use smart phone flash tool to root using a file i got from http://www.fight.org.ua/publications...novo_A789.html. Everything was fine until I deleted the original home UI and the apex launcher also. So there isn't anything I can do. I'm downloading the S223 from some russian site and try, hopefully I can find some luck there. Downloading slowly~ sighhhh.
---------- Post added at 07:49 AM ---------- Previous post was at 07:40 AM ----------
BTW~ i'm willing to test out your rom too! I wouldn't want to sound too demanding, put please please put in the play store will ya?
I posted the custom build, see first post. It may take a while before I can get it uploaded, I am on a bad link.
Also, there have been 20 downloads on the recovery image. Come on guys, someone must be able to provide feedback about it working or not!
A789_S227_cybermaus_V2 ROM is working
Hello
Thanks for Your work.
Your A789_S227_cybermaus_V2 ROM is working.
Simple Flashing and start without problems. Now I must check some functions.
Thx again
basell
Edit:
The 3g connections don't work at first run. After restore they start but in My opinion with less sensitivity (compare to stock rom). It's look like A789 loose some frequency on witch can work.
Edit2:
And they have some strange behavior - After couple min of data connection (on 3G) they disconnect with information - "Restricted access changed" and the same is when I try to choose network manually. After that sometimes they login to 3G sometimes they change to EDGE.
In Stock version (S221) was not this kind of problems.
Edit3:
In place with good 3G signal I have no problem with data transfer.
How Can I check on witch frequency (2100,900,850) I have connected My data transfer?
Thanks for testing
Well, I definitely did not mess with any of the 3G stuff. So if it is true that 3G is less sensitive, then I would claim it is true for the factory S227 vs factory S221, and not directly related to my cleanup of it.
But (sorry to say so) I have learned to take claims of improved or degraded radio sensitivity with a grain of salt, even for the factory ones.
Having said that: Restoring S221 radio into S227 firmware is easy. The radio is separate firmware file, and I can extract the S221, S223 and S227 firmware in a separate file, so you can test. Were you actually using factory S221, or some other?
As to whether it is using 2100, 900 or 850: I can probably figure out how to get that info, *BUT* reality is that your provider most likely has only one frequency anyway. Most, pretty much all, EU providers are on 2100. The phone could not get to 900, simply because your provider does not have that frequency in the air (not for 3G anyway). And 850 is not supported at all on this phone.
Anyway, inside MU utility, engineer mode, bandmode, you can check/set the frequencies that are supported.
But please run a proper test if 3G is really degraded. As stated. it is so often a empty claim, I am somewhat careful to follow it. You want me to extract the 3 versions of firmware files in update.zip files?
Also, what country/vendor are you? please list the MMC and MNC from inside the APN settings.
Hi
If You will prepare this files I can test it tomorrow.
I'm from Poland and I have two frequency on data transfer - 2100 and 900. But I don't know if A789 use only one or change them. The place I'm test the signal is poor and I don't see if I work on 2100 or 900.
If You can, pleas tell me what kind of tests I can do to do that properly
Ok, here they are. update.zip type.
I only have S221 and S227, but the firmware files were indeed different, in more than just their timestamps. Of course, normally I would assume newer is better. So to make it clear: below files only replace the radio&dsp firmware, not the phone firmware.
Try to test honestly for yourself. Same conditions, same place, same time (because network load can make a difference)
It is possible that 3G really is degraded in S227, but as mentioned, I learned to not jump to conclusions just because the network is having a bad day.
WARNING: I retracted the two attachment, because I made a typo in the installer script. While the firmware is for the A789 (MT6577), the installer script is for the A750 (MT6575). Sorry. I will upload the correct ones in a moment.... Anyone that took a copy of these files before Oct 14, delete them!!!
I suspect the install would simply have failed, no harm done, but best to get rid of all copies anyway
BTW: basell, is that why you asked how to install? Really, if you ask for help, you should provide a bit more info. Anyway, I attached newer scripts, if you still want to try.
sorry for My question but :
How to install this firmware?
Like any update.zip on android. Go into recovery (see post #3) and apply the update.zip
i have the problem that the netlocation doesn't work with google maps, i flashed the cyber update 1.3, nothing changed, what should I do now?
And this is on what phone and ROM?
Anyway, to quote myself: "While you are in recovery, also wipe cache. And finally, go into MobileUncle tool, the MTK Engineer mode, and in location settings, change the NetLoc from MEDIATEK to GOOGLE. Now your location services should work."
many thanks, Cybermaus, netlocation works again after your instruction
Hi,
Thank you very much for building the ROM !!
I am using it for 3 days now and I am happy to report no problems with it. Everything works and most important: no more freezes !!!
my A789 came with the Etotalk by Dean ROM which was mostly OK, but was freezing from time to time (some days not at all, other days several times a day - most of the times when hanging up a call or, when trying to do wake it from standby: I was pressing the power button, but the screen would not light up).
Other things I like about this ROM:
- all phone functions work great
- Google Play works perfectly
- is rooted
- it has the Lenovo battery app, which is great! I am not 100% sure if this is the reason, but the battery life went from 1 day to 2 days
- I had no issues flashing it
- CWMT recovery works
Also, so far, I did not experience any 3G issues
I have written a small review of the Lenovo Security app, which you guys may want to put back on your phone if it was cooked out of it.
jman0 said:
Thinking it twice, I've remembered another reason. One of the things I like most about the apkhot rom I'm using is that the external sdcard is mounted on /sdcard and not /mnt/sdcard2, which avoids problems with many apps. I tried one of the newest apkhot roms, based on s227, and none of the tricks to exchange /sdcard and /mnt/sdcard2 worked with it.
Click to expand...
Click to collapse
Well, that is actually an easy change to perform, just change the /etc/fstab.vold
However, if you go into settings->storage, the first option is default write disk. Change it from USB storage(the internal SD) to SD (the external SD)
So no hacking is needed at all.....
I've been running your rom for around 6 hours now. Everything runs fine. The 3G connection worked without much trouble. The only thing I haven't been able to do is performing a backup with the CWM Touch Recovery. So, I've just flashed the recovery I had on the apkhot rom I was using, using Mobileuncle tools, and now I've been able to create a backup.
So far, so good, and I've noticed a slight performance increase, too.
I used the ROM from here. (LG Optimus T (P509): January 8: Build 7/Final)
I have no Google Play store icon anywhere. I see the Google Play process running in the background.
but have no way to get it to show up. This on a fresh ROM, all User data, Cache, and all that cleared.
Any help on this would be nice.
Would of asked on that post where I got the ROM. but I don't have the patience to or any thoughts about other post to make to meet the requirements to even post there.
Tried without flashing the Google Apps and with the google apps they list there.
Flashing Google Apps just crashes things like the browser. it wont even open.
Not flashing Google Apps I can use the browser just fine. but I still see "Google Play Services" Running. So that tells me google play is installed.
So don't have to flash it. but cant open it even if i did or not. no Icon anywhere no matter what I try. I been wanting to use CM10. but this issue keeps me going back to CM7.
Thanks in advance to the person with the answer.
TroyFoxxin said:
I used the ROM from here. (LG Optimus T (P509): January 8: Build 7/Final)
I have no Google Play store icon anywhere. I see the Google Play process running in the background.
but have no way to get it to show up. This on a fresh ROM, all User data, Cache, and all that cleared.
Any help on this would be nice.
Would of asked on that post where I got the ROM. but I don't have the patience to or any thoughts about other post to make to meet the requirements to even post there.
Tried without flashing the Google Apps and with the google apps they list there.
Flashing Google Apps just crashes things like the browser. it wont even open.
Not flashing Google Apps I can use the browser just fine. but I still see "Google Play Services" Running. So that tells me google play is installed.
So don't have to flash it. but cant open it even if i did or not. no Icon anywhere no matter what I try. I been wanting to use CM10. but this issue keeps me going back to CM7.
Thanks in advance to the person with the answer.
Click to expand...
Click to collapse
Are you sure you are using the right GApps package? That's Rasheds ROM you're referring to using. Build 7 is Android 4.1.2. Check this link here. And some of the problems you may be experiencing could be due to a faulty installation because of limited system space. You may want to review the LG Optimus One FAQ too.
shinobisoft said:
Are you sure you are using the right GApps package? That's Rasheds ROM you're referring to using. Build 7 is Android 4.1.2. Check this link here. And some of the problems you may be experiencing could be due to a faulty installation because of limited system space. You may want to review the LG Optimus One FAQ too.
Click to expand...
Click to collapse
There is more then enough internal space. (150MB Free after Gapps Flashed).
I tried again with the Gapps for 4.1.2. At the time my post I re flashed the ROM but left it out. I didn't flash it.
When I tried again. I got the Updating Android. but still no Play Store Icon. However it did not break my home or other buttons.
and browser still working. but again. no Play Store icon.
I checked the FAQ. Currently i see nothing there to give hints. I got more then enough free space. I've flashed ROMs on this phone dozens of times so I know the whole wiping of cache and data and all that between each ROM.
TroyFoxxin said:
There is more then enough internal space. (150MB Free after Gapps Flashed).
I tried again with the Gapps for 4.1.2. At the time my post I re flashed the ROM but left it out. I didn't flash it.
When I tried again. I got the Updating Android. but still no Play Store Icon. However it did not break my home or other buttons.
and browser still working. but again. no Play Store icon.
I checked the FAQ. Currently i see nothing there to give hints. I got more then enough free space. I've flashed ROMs on this phone dozens of times so I know the whole wiping of cache and data and all that between each ROM.
Click to expand...
Click to collapse
You have to trim the Rom, there's not enough SYSTEM space for the Rom and Gapps..this has been discussed time and time again on rashed thread(cm10)..There's a tool ( Oone Rom editor that will help you do this) This is why you have the bugs that your facing.
3ncrypt3d_Droid said:
You have to trim the Rom, there's not enough SYSTEM space for the Rom and Gapps..this has been discussed time and time again on rashed thread(cm10)..There's a tool ( Oone Rom editor that will help you do this) This is why you have the bugs that your facing.
Click to expand...
Click to collapse
I used that program already. looking at all that it would only show.
the math dont even come to half of what the phone memory is.
TroyFoxxin said:
I used that program already. looking at all that it would only show.
the math dont even come to half of what the phone memory is.
Click to expand...
Click to collapse
The system partition has nothing to do with the devices memory. These devices have a 190 MB system partition, this is where Android gets installed. What you are referring to is the user data partition which is 200 MB, while the device has 415 MB+- RAM ( memory ). Unless you are using Android 4.2.2, the only way to see how much space is on the system partition is with a third party app, with ADB, or with a Terminal Emulator app on the device. The math isn't adding up because you don't understand it, that's why I pointed you to the FAQ thread.
I wrote OOne ROM Editor. I haven't put hundreds, yes hundreds, of hours in to it's development just for general pleasure. It was written for a specific purpose, to trim ICS and newer ROMs for devices with small or limited system partitions.
shinobisoft said:
The system partition has nothing to do with the devices memory. These devices have a 190 MB system partition, this is where Android gets installed. What you are referring to is the user data partition which is 200 MB, while the device has 415 MB+- RAM ( memory ). Unless you are using Android 4.2.2, the only way to see how much space is on the system partition is with a third party app, with ADB, or with a Terminal Emulator app on the device. The math isn't adding up because you don't understand it, that's why I pointed you to the FAQ thread.
I wrote OOne ROM Editor. I haven't put hundreds, yes hundreds, of hours in to it's development just for general pleasure. It was written for a specific purpose, to trim ICS and newer ROMs for devices with small or limited system partitions.
Click to expand...
Click to collapse
I dont know what to try to trim with that program. i dont know what half them apps do.
Like Exchange2.apk. I don't know what that is. Which are some of the key things i can trim?
Also, Telling me how many hours you put into a program and that i dont understand something not going to be on my good side. So i missed something, big deal. I just got off a anxiety attack. and i was needing was a simple answer. doing a search for "LG P509 No Playstore Icon" was getting me no where and i didnt want to have to search page by page of the 487 pages of the ROMs post to find clues.
TroyFoxxin said:
I dont know what to try to trim with that program. i dont know what half them apps do.
Like Exchange2.apk. I don't know what that is. Which are some of the key things i can trim?
Click to expand...
Click to collapse
The help docs in OOne ROM Editor's thread list some of the known files that can be removed from and or moved around, ie; converted to user app, in the ROM.
shinobisoft said:
The help docs in OOne ROM Editor's thread list some of the known files that can be removed from and or moved around, ie; converted to user app, in the ROM.
Click to expand...
Click to collapse
just never mind. i dont need the stress right now, ill just stay with CM7.
Every time i try to Build the ROM and put it on the phone CWM just says its bad.
TroyFoxxin said:
just never mind. i dont need the stress right now, ill just stay with CM7.
Every time i try to Build the ROM and put it on the phone CWM just says its bad.
Click to expand...
Click to collapse
Are you getting an "assert() failed" message? If you are using CWM 5.0.2.7 Touch, it will only allow you to install P500 ROMs. OOne ROM Editor has the ability to remove the "assert()" statement from the ROM's updater-script to prevent that particular error from happening. Before building the ROM, go to the Tools->Build submenu and select the Build Options command. Check the checkbox for "Remove updater-script 'assert()' statement". Then build the ROM.
And stress... You call editing a ROM stress? Try writing the code for OOne ROM Editor Or better yet, play with live electricity :silly: - oh wait I do that already since I am an electrician... DOn't get frustrated by it. Sit back relax and soak in some of the knowledge around here.
shinobisoft said:
Are you getting an "assert() failed" message? If you are using CWM 5.0.2.7 Touch, it will only allow you to install P500 ROMs. OOne ROM Editor has the ability to remove the "assert()" statement from the ROM's updater-script to prevent that particular error from happening. Before building the ROM, go to the Tools->Build submenu and select the Build Options command. Check the checkbox for "Remove updater-script 'assert()' statement". Then build the ROM.
And stress... You call editing a ROM stress? Try writing the code for OOne ROM Editor Or better yet, play with live electricity :silly: - oh wait I do that already since I am an electrician... DOn't get frustrated by it. Sit back relax and soak in some of the knowledge around here.
Click to expand...
Click to collapse
Again bad, day. had a Anxiety attack. haven't slept. I havent played with Android as often as other things. I am also a Electronic person. Soldering Caps and so on on motherboards all the time. So please dont talk like that to people you dont know. they may have plenty of knowledge. but maybe having whats called a short fuse kinda day.
Also I did do "Remove updater-script 'assert()' statement". And i get no error from OOne ROM Editor it was in CWM it would just say it was bad, or say nothing at it would just restart CWM. Ill try again when Im better. Right now my phone has CWM 5.0.2.0, So ill change that as well when i try again.
but right im turning in for the night.
TroyFoxxin said:
Again bad, day. had a Anxiety attack. haven't slept. I havent played with Android as often as other things. I am also a Electronic person. Soldering Caps and so on on motherboards all the time. So please dont talk like that to people you dont know. they may have plenty of knowledge. but maybe having whats called a short fuse kinda day.
Also I did do "Remove updater-script 'assert()' statement". And i get no error from OOne ROM Editor it was in CWM it would just say it was bad, or say nothing at it would just restart CWM. Ill try again when Im better. Right now my phone has CWM 5.0.2.0, So ill change that as well when i try again.
but right im turning in for the night.
Click to expand...
Click to collapse
Sorry you're having a bad day. Rest assured, if I was talking down to you, there wouldn't be any smilies. I was just expressing that you weren't the only one out there with stress in their life, and some of us have loads of it. On that note, I'm not one of the many teenagers around here. So I'm not talking down to you, but out of experience. My teenage years were gone 23 years ago. Apparently it was take outta context, Sorry.
I think the issue I mentioned for CWM 5.0.2.7 is a shared issue with CWM 5.0.2.0, but I can't say for sure as I don't recall ever using CWM 5.0.2.0. I wasn't suggesting changing to the CWM I mentioned, was asking if that was the one you were/are using, which you've now stated you aren't. There error I was referring to would have been from CWM after flashing or trying to flash a ROM.
shinobisoft said:
Sorry you're having a bad day. Rest assured, if I was talking down to you, there wouldn't be any smilies. I was just expressing that you weren't the only one out there with stress in their life, and some of us have loads of it. On that note, I'm not one of the many teenagers around here. So I'm not talking down to you, but out of experience. My teenage years were gone 23 years ago. Apparently it was take outta context, Sorry.
I think the issue I mentioned for CWM 5.0.2.7 is a shared issue with CWM 5.0.2.0, but I can't say for sure as I don't recall ever using CWM 5.0.2.0. I wasn't suggesting changing to the CWM I mentioned, was asking if that was the one you were/are using, which you've now stated you aren't. There error I was referring to would have been from CWM after flashing or trying to flash a ROM.
Click to expand...
Click to collapse
Can that program add apps? If so or not. maybe I can edit the zip directly. but is it possible to port the old music player in Gingerbread to JB. I don't like Apollo. or would it just be better to remove Apollo and find something I like in Play store when i make this work?
And should i try to use CWM 5.0.2.7 instead, and try again?
EDIT: Says I have the latest according to this.
EDIT 2: just ROM Manger being a butt. going to the site directly. I see CWM 5.0.2.7 as the latest.
TroyFoxxin said:
Can that program add apps? If so or not. maybe I can edit the zip directly. but is it possible to port the old music player in Gingerbread to JB. I don't like Apollo. or would it just be better to remove Apollo and find something I like in Play store when i make this work?
And should i try to use CWM 5.0.2.7 instead, and try again?
EDIT: Says I have the latest according to this.
EDIT 2: just ROM Manger being a butt. going to the site directly. I see CWM 5.0.2.7 as the latest.
Click to expand...
Click to collapse
Yes apps can be added, but only as User Apps. Select "User Apps" in the treeview on the left. Then right click on the listview on the right and select the "Add apps" command item. A file dialog will appear. Multiple file selection is allowed.
You can remove Apollo. I prefer Google Play Music myself.
For your recovery. CWM 5.0.2.7 will only allow installing P500 ROMs. I do prefer the touch version of CWM, and since P509 is identical to P500, it's really not an issue other than baseband which is solved with a flashable patch. I really cannot recommend a recovery as we all have different likes/dislikes/usage patterns. I would recommend not using ROM Manager to install a recovery. It's been known to be faulty with our devices. Theres always ADB and fastboot or another one of my tools, Android Flash Recovery. There are several other apps around XDA that can do this also.
shinobisoft said:
Yes apps can be added, but only as User Apps. Select "User Apps" in the treeview on the left. Then right click on the listview on the right and select the "Add apps" command item. A file dialog will appear. Multiple file selection is allowed.
You can remove Apollo. I prefer Google Play Music myself.
For your recovery. CWM 5.0.2.7 will only allow installing P500 ROMs. I do prefer the touch version of CWM, and since P509 is identical to P500, it's really not an issue other than baseband which is solved with a flashable patch. I really cannot recommend a recovery as we all have different likes/dislikes/usage patterns. I would recommend not using ROM Manager to install a recovery. It's been known to be faulty with our devices. Theres always ADB and fastboot or another one of my tools, Android Flash Recovery. There are several other apps around XDA that can do this also.
Click to expand...
Click to collapse
Ill just leave it be then. Its always worked for me. if there was a problem it was with the ROM.
I haven't tried Google Play music before. but is it possible to port the music player from Gingerbread to JB?
but I'm getting the jiffs of that program. I just need to play with it. some things I converted to User apps never loaded at all.
So I need to play with what I can put in User data that will still work. but none the less i been getting the builds to install.
And even show Play Store again.
Just need to mess with what works and dont in User data.
-Edit-
I tried to Make LatinIME Smaller and convert it to Userdata in the build options but every build has no keyboard support.
TroyFoxxin said:
Ill just leave it be then. Its always worked for me. if there was a problem it was with the ROM.
I haven't tried Google Play music before. but is it possible to port the music player from Gingerbread to JB?
but I'm getting the jiffs of that program. I just need to play with it. some things I converted to User apps never loaded at all.
So I need to play with what I can put in User data that will still work. but none the less i been getting the builds to install.
And even show Play Store again.
Just need to mess with what works and dont in User data.
-Edit-
I tried to Make LatinIME Smaller and convert it to Userdata in the build options but every build has no keyboard support.
Click to expand...
Click to collapse
Is there anyway you can post the updater-scipt from one of the builds you've made with OOne ROM Editor where you've modified the LatinIME.apk and specified to install as a User App? The updater-script is located in the /META-INF/com/google/android folder in the output/build ROM.
One thing to note tho, build options are reset after every build.
shinobisoft said:
Is there anyway you can post the updater-scipt from one of the builds you've made with OOne ROM Editor where you've modified the LatinIME.apk and specified to install as a User App? The updater-script is located in the /META-INF/com/google/android folder in the output/build ROM.
One thing to note tho, build options are reset after every build.
Click to expand...
Click to collapse
I noticed that it resets everytime. so i been ontop of that. I check both boxes in the build options before I build them.
I did read also not to delete LatinME.apk. and use the editor. But i know the LatinME is a nice chunk of Memory.
So to make it smaller and usable in User apps is plus to make the important things I need working.
-Edit-
I haven't been saving the bad builds. that attachment was for a new build I haven't tried yet.
and I just did. now keyboard working. But I think that build I didn't tell it to put Latin in User apps that time.
But I did use the editor. So I don't know.
TroyFoxxin said:
I noticed that it resets everytime. so i been ontop of that. I check both boxes in the build options before I build them.
I did read also not to delete LatinME.apk. and use the editor. But i know the LatinME is a nice chunk of Memory.
So to make it smaller and usable in User apps is plus to make the important things I need working.
-Edit-
I haven't been saving the bad builds. that attachment was for a new build I haven't tried yet.
and I just did. now keyboard working. But I think that build I didn't tell it to put Latin in User apps that time.
But I did use the editor. So I don't know.
Click to expand...
Click to collapse
I can't tell what you installed as user apps from the updater-script, but there were apps installed to the user ( data ) partition. And the assert() statement is missing from the script, so I know that option was checked in the Build Options.
The reason I say not to manually move it is because the LatinIME Keyboard Editor should be used to edit it's dictionaries. Once you press the "Apply" button in the LatinIME Keyboard Editor, it removes the LatinIME.apk from System Apps and actually puts it in the apps Recycle Bin. I use the list of files in the Recycle Bin as a filter of files not to include when building the ROM. LatinIME Keyboard Editor also looks in the Recycle Bin for the LatinIME.apk if it can't find it in System Apps but it assumes that it's deleted so it won't do anything.
I am actually working on OOne ROM Editor right now. So you can be on the lookout for an update
shinobisoft said:
I can't tell what you installed as user apps from the updater-script, but there were apps installed to the user ( data ) partition. And the assert() statement is missing from the script, so I know that option was checked in the Build Options.
The reason I say not to manually move it is because the LatinIME Keyboard Editor should be used to edit it's dictionaries. Once you press the "Apply" button in the LatinIME Keyboard Editor, it removes the LatinIME.apk from System Apps and actually puts it in the apps Recycle Bin. I use the list of files in the Recycle Bin as a filter of files not to include when building the ROM. LatinIME Keyboard Editor also looks in the Recycle Bin for the LatinIME.apk if it can't find it in System Apps but it assumes that it's deleted so it won't do anything.
I am actually working on OOne ROM Editor right now. So you can be on the lookout for an update
Click to expand...
Click to collapse
Well I got everything to work. Keyboard, Play Store, etc. But not sure ill stick with trying to put JB on the phone.
Its really slow. Unless more free space on the system partition would allow it to run faster.
Would your OOne ROOM Editor work on Any rom Like a CM7 Rom? or just JB ones? if not would you consider support for other roms?
I haven't tried, but figure I would ask.
TroyFoxxin said:
Well I got everything to work. Keyboard, Play Store, etc. But not sure ill stick with trying to put JB on the phone.
Its really slow. Unless more free space on the system partition would allow it to run faster.
Would your OOne ROOM Editor work on Any rom Like a CM7 Rom? or just JB ones? if not would you consider support for other roms?
I haven't tried, but figure I would ask.
Click to expand...
Click to collapse
OOne ROM Editor is just for ICS and JB ROMs. It's really not needed for Android versions prior to 4.0.
Hi
I have a Samsung Galaxy GT-I5801 with me for past couple of years.
Its current OS spec are:
Firmware version- 2.2
Baseband version- I5801DDJP2
Kernel version- 2.6.32.9 [email protected] #2
Build Number- FROYO.DDJP6
My phone has become kind of slow, like for even basic tasks like opening call log or messaging app, it takes good 10-15 seconds. Sometimes it even goes unresponsive when trying to end a call thus causing call to continue thus carrier balance reduction. There are no 3rd party apps installed on it. Even updating the pre-installed apps gives the message of memory being low.
Now my query is:
Will flashing it to a custom ROM will improve its working at least in the basic areas of call and texting?
If so, then which is the most suitable custom ROM?
Is it necessary to root the phone before flashing it ?
Which tool is best/easiest for said purposes?
Please go easy on me, I've been out of the IT and tech game since past 1 year and bit rusty on these things
RudraP said:
Will flashing it to a custom ROM will improve its working at least in the basic areas of call and texting?
If so, then which is the most suitable custom ROM?
Is it necessary to root the phone before flashing it ?
Which tool is best/easiest for said purposes?
Click to expand...
Click to collapse
I would say yes. I don't know what is causing the freezes, but (beside that this could also be a hardware problem) a custom ROM should fix that.
Any GB-based ROM should do a fine job. There are also Froyo-based ROMs for our device. The CM7.2 build by marcellusbe does a very good job.
Nope. If you flash via Odin (Flash-Software for Windows) you just need a usb-connection. If you flash it via recovery, you may need to flash a custom recovery first.
Derp - another proud Galaxy3 user :highfive:
DerpyDerp said:
I would say yes. I don't know what is causing the freezes, but (beside that this could also be a hardware problem) a custom ROM should fix that.
Any GB-based ROM should do a fine job. There are also Froyo-based ROMs for our device. The CM7.2 build by marcellusbe does a very good job.
Nope. If you flash via Odin (Flash-Software for Windows) you just need a usb-connection. If you flash it via recovery, you may need to flash a custom recovery first.
Derp - another proud Galaxy3 user :highfive:
Click to expand...
Click to collapse
I tried SuperOneClick but it failed to even detect my phone, let alone root. Tried rooting directly through phone by installing z4root on it. It too failed to root my device, just a blue screen saying "Running Exploit" with z4mod logo kept on displaying for 10-15 minutes, after which phone switched off itself. Had to power it back on myself. Tried it couple of times more but no success.
So now if I use Odin to directly flash the firmware to a modded one, would it work, considering the fact that the phone hasn't been rooted. More importantly, would it be wise to do so? Don't want to hard brick the device as its my backup device after my Xperia SP took a plunge in the water and now fails to even boot, just vibrates thrice and that's it.
Update:
Took a leap of faith with Odin and Cyanogen & now the device is rockin' like a grandma with a new hip replacement Lags no more, operation is smooth, but a 2nd minor problem has cropped up.
It now refuses to install any app from Play Store citing Insufficient Space. I changed the default installation space to external but still the problem persists.
Update 2:
For my above mentioned problem, looks like something to do with Gapps but I don't know what it is and what to do about it. Moreover as today I tried to make calls or send messages, I found out I'm unable to do so. The dialler dials after good 2-3 minutes of pressing/selecting the dial option for a number while message inbox is empty but it refuses the receive any sms citing Inbox is full. I thought just flashing the firmware should do the trick but looks like it just was the tip of the iceberg.
You can find the gapps (Google Apps - like Play Store, Gmail, ...) here:
http://goo.im/gapps/
Assuming you're on Gingerbread (CM 7.x) it's this package: http://goo.im/gapps/gapps-gb-20110828-signed.zip
Put this zip-file on your SD card, power off your phone and/or reboot to recovery. Navigate to "Select zip from sd card" -> select your gapps.zip and flash. Then "wipe cache" and "wipe dalvik cache" anywhere in the submenus Just to make sure the gapps get recognized correctly.
Another trick for expanding the internal storage is Link2SD. You need a 2-partition sd-card for this. 1. partition with FAT and 2. one with ext2/3/4
Link2SD will mount this second partition to the internal storage to expand your storage for apps and other system stuff.
You know... Getting the most of a half-dead low-end device needs a bit of geekiness
bad zip
Well I selected erase all data option in the phone which booted it into recovery mode. Here I cleared the cache and the user data. When I tried to install zip file from sd card it gave the following error message, "Can't open /sdcard/gapps-gb-20110828-signed.zip (bad) Installation Aborted"
What seems to be the problem now?
Update:
Tried again and this time it worked. Now everything is running fine. Thanks a ton for the help mate, can't express my gratitude through words.
I do want to ask one thing here.
If I install this, http://forum.xda-developers.com/showthread.php?t=1803180, will the JB experience be coupled with performance drop ?
Honestly Cyanogen has turned me into a junkie, now I want to try on the new but stable mods. Moreover as my Xperia SP is now out of warranty, I'm planning to get it fixed and then root and flash it too!