is it possible to overclock the optimus 3D to 1.5ghz and above , because 1.5 worked on mine but not stable
Will not be stable. Even 1.4 ist stable for dayly use.
Edit. Sorry it is posible
please hit thanks if i helped
confused???
I don't understand that becuase 1.4ghz is perfect for me on thaiz v2.6.1 prada mix , with titan kernel , never rebooted or slowed down once , and scored 4556 on new quadrant , 4680 on old one , I am currently reconstructing an overclock app to get to 1.5ghz and be stable , but its hard , it should only be the voltage though , because i know the cpu can handle it.
Just so you all know, my Thrill 4G could go up to 1.67Ghz overclock and was stable.
It all just depends on the phone itself.
EDIT: I should also mention that I was using kernel with only init.d support. There wasn't any tweaks in it.
The Dark Lestat said:
Just so you all know, my Thrill 4G could go up to 1.67Ghz overclock and was stable.
It all just depends on the phone itself.
EDIT: I should also mention that I was using kernel with only init.d support. There wasn't any tweaks in it.
Click to expand...
Click to collapse
What You Get in antutu and Quadrant ? Damn 1.67 is crazy When i cross 1.388 Phone goes crrazy i Wonder whats the Highest clock the omap4430 can hit?
if 1.67 is possible ill make sure we all get 1.5 atleast , then well show the galaxy s2's who's boss , but i don't get a lot of time , I'm a school kid , but holidays are coming soon... ill make a kernel and rom before they end
Toxygen55 said:
if 1.67 is possible ill make sure we all get 1.5 atleast , then well show the galaxy s2's who's boss , but i don't get a lot of time , I'm a school kid , but holidays are coming soon... ill make a kernel and rom before they end
Click to expand...
Click to collapse
Lol the SGSII dev's aren't trying to go over 1.6GHz. We're already there, just don't want to destroy battery life.
Also, not every phone will be able to even make it to 1.5GHz for the fact that all the processors are built slightly different.
wow! with such a high overclock your battery will drain fast!!
The Dark Lestat said:
Lol the SGSII dev's aren't trying to go over 1.6GHz. We're already there, just don't want to destroy battery life.
Also, not every phone will be able to even make it to 1.5GHz for the fact that all the processors are built slightly different.
Click to expand...
Click to collapse
If you would please give a few secrets
sent from my acidhazard thrill
wayno140 said:
If you would please give a few secrets
sent from my acidhazard thrill
Click to expand...
Click to collapse
It was just the phone processor. Lol
I didn't do anything.
Sent from my Samsung Galaxy S II w/ DUAL BOOT: AOKP / MIUI
Related
Take a look at this link
The GPU has been overclocked to 200 MHZ result from stock 25 fps to 36.5...
The desire(+-27FPS neocore) has the AMD Z430 GPU wich is also on the acer Liquid running at much higher 34,6 FPS @ the same resolution 800x480 but UC cpu768 MHZ although it still preforms much higher on neocore !
I'm sure that some of you developers with the knowledge are prepared figuring this out to get the desire GPU preforming better !..
(tnx to beidl) for those who're trying to find the changes: http://git.linuxtogo.org/?p=groups/m...8a6a0dfe5ba912
The Snapdragon Processor holds the CPU and GPU in one chip... i dont know if youre able to do that...
EDIT: maybe changing some clocking and voltage values in kernel???
More performance can somehow be squeezed out of it tho. Its just not good enough with the power it holds
-------------------------------------
Sent via the XDA Tapatalk App
I Agree there is more..
and it will drain the battery some more...
pina_ said:
and it will drain the battery some more...
Click to expand...
Click to collapse
I don't think people that wants to get the best benchmarks.... care? lol goto maximum overclocking.... possilbey higher than 1.27GHz..... after you benchmarked and got your name in the list.... go back to UVOC lol
atomfix said:
I don't think people that wants to get the best benchmarks.... care? lol goto maximum overclocking.... possilbey higher than 1.27GHz..... after you benchmarked and got your name in the list.... go back to UVOC lol
Click to expand...
Click to collapse
Yeah thats why im no 1
Come get me mate lollol
JD
JupiterDroid said:
Yeah thats why im no 1
Come get me mate lollol
JD
Click to expand...
Click to collapse
lol, well if Richard would like to make a temporary kernel that would restore the volt and try 1.4GHz maybe more. HTC Desire could be getting the No.1 spots in benchmarking
for those who're trying to find the changes: http://git.linuxtogo.org/?p=groups/...;hpb=110e73c591db3fd23d8558659f8a6a0dfe5ba912
looks like only some parameters and 2 functions (pc_clk_enable and pc_clk_disable) were changed.
I don't have much experience with kernel developing, I'm just a stupid java dev. lol
But I'd like to see this added to the 2.6.32.9 kernels, and since we would be able to
change the clock frequency somewhere in /sys/module/clock/, something like a "SetGPU" would be a nice project to do.
beidl said:
for those who're trying to find the changes: http://git.linuxtogo.org/?p=groups/...;hpb=110e73c591db3fd23d8558659f8a6a0dfe5ba912
looks like only some parameters and 2 functions (pc_clk_enable and pc_clk_disable) were changed.
I don't have much experience with kernel developing, I'm just a stupid java dev. lol
But I'd like to see this added to the 2.6.32.9 kernels, and since we would be able to change the clock frequency in /sys/module/clock_7x00/parameters/gpu, something like a "SetGPU" would be a nice project to do.
Click to expand...
Click to collapse
That would be sweet
Sounds good to me Im up for throwing my Desire in the firing line
JD
JupiterDroid said:
Sounds good to me Im up for throwing my Desire in the firing line
JD
Click to expand...
Click to collapse
same haha
i'd totally do it too....
*Hopes that richardtrip will take a look at this thread* lol
i wont be happy till were above the n1 in linpack
and ...
till we have 1800 in quadrant (n1 best so far is 1750)
Stay on topic please!!
i wont be happy till were above the n1 in linpack
and ...
till we have 1800 in quadrant (n1 best so far is 1750)
Click to expand...
Click to collapse
True... we need to get ahead of N1 lol I'm ashamed of the performance it already shows lol
-------------------------------------
Sent via the XDA Tapatalk App
How many batteries do you wanna carry?
eezray said:
How many batteries do you wanna carry?
Click to expand...
Click to collapse
Solar Charger
Fstluxe,
First of all Thank you!! this is the Time and way to Inspire the devs that have the knowledge ,letting them bring this amazing Patch to the desire and maybe all the android Phones ! Great thank you for awaking the community..
So developers Please Come on Just try this out please!! i will putt my money on THIS project!!!!!
FuguMod Ultra
This is by far the best Kernel I've used in my SG3. I had stuck to the FuguMod 2.2 Bleeding Edge version for quite a long time, and I was terribly missing the 1% Battery MOD. And I learned the hard way, that the FuguMod 2.4 Alpha 14 (the other kernel that can be Overclocked to 1.3GHz & has the 1% MOD) has a huge battery drain problem.
This one right here, which was prescribed to me by marcellusbe is amazing!
The battery life is great, even after being overclocked to 1.3GHz. Its pretty stable (No Freeze/ForceClose issues so far), and the phone has almost completely stopped lagging. The phone isn't heating up even @ 1.3Ghz. Scored 15+ in Linpack and got a Quadrant Score of 900+ [Check Signature for Screenshots ].
All the ROM makers out there should check this one out!
Download Link
Created By : marcellusbe
P.S : This is NOT the official release of the Kernel. Marcellusbe will bring out the last build of the Bleeding Edge Ultra Edition after testing out other frequencies and adding a few extra features like the Voodoo Sound Recording. Wait for it
For more details, head over to the Official Thread.
Ok, I will check that out.. thanks for posting!
Edit:
great kernel! Really speed things up!
I have set it with SetCPU to 975 MHz for a stability and speed.
and option is on demand.
Pwng3 said:
FuguMod Ultra
This is by far the best Kernel I've used in my SG3. I had stuck to the FuguMod 2.2 Bleeding Edge version for quite a long time, and I was terribly missing the 1% Battery MOD. And I learned the hard way, that the FuguMod 2.4 Alpha 14 (the other kernel that can be Overclocked to 1.3GHz & has the 1% MOD) has a huge battery drain problem.
This one right here, which was prescribed to me by marcellusbe is amazing!
The battery life is great, even after being overclocked to 1.3GHz. Its pretty stable (No Freeze/ForceClose issues so far), and the phone has almost completely stopped lagging. The phone isn't heating up even @ 1.3Ghz. Scored 15+ in Linpack and got a Quadrant Score of 900+.
All the ROM makers out there should check this one out!
Download Link
Click to expand...
Click to collapse
Did u create this?? Why Marcellusbe didnt release this in his thread?
Is this for real? Why have you released it instead of marcellusbe :S
Pwng3 said:
FuguMod Ultra
This is by far the best Kernel I've used in my SG3. I had stuck to the FuguMod 2.2 Bleeding Edge version for quite a long time, and I was terribly missing the 1% Battery MOD. And I learned the hard way, that the FuguMod 2.4 Alpha 14 (the other kernel that can be Overclocked to 1.3GHz & has the 1% MOD) has a huge battery drain problem.
This one right here, which was prescribed to me by marcellusbe is amazing!
The battery life is great, even after being overclocked to 1.3GHz. Its pretty stable (No Freeze/ForceClose issues so far), and the phone has almost completely stopped lagging. The phone isn't heating up even @ 1.3Ghz. Scored 15+ in Linpack and got a Quadrant Score of 900+.
All the ROM makers out there should check this one out!
Download Link
Click to expand...
Click to collapse
wrong section, wrong tags at topic and finally i think everybody (ROM makers) know that
vikraam said:
Did u create this?? Why Marcellusbe didnt release this in his thread?
Click to expand...
Click to collapse
shr33kant said:
Is this for real? Why have you released it instead of marcellusbe :S
Click to expand...
Click to collapse
I'm not sure why marcellusbe refrained from updating his thread
After he messaged about this, I did search a lot on XDA and I found this one missing.
P.S : I did NOT create this!
I just thought I'd let everyone know
flashing
What are the frequences used in this kernel?
Sent from my GT-I5800 using Tapatalk
Is this kernel function in Cm7?
jazux said:
wrong section, wrong tags at topic and finally i think everybody (ROM makers) know that
Click to expand...
Click to collapse
Wrong section?
Wrong tags?
And yeah. maybe the ROM makers do know. But how come none of them used this one before?
tucucumelo said:
Is this kernel function in Cm7?
Click to expand...
Click to collapse
I'm not sure. But there is no risk of a hardbrick... There is no bootloader in the kernel
Edit : marcellusbe just answered that for you.
jazux said:
wrong section, wrong tags at topic and finally i think everybody (ROM makers) know that
Click to expand...
Click to collapse
Hmm. Don t know why marcellusbe didn t include this in his thread.
@Jazux : - Cool banner.
It's the last build of the bleedingedge ultra edition .. I didn't released it yet since I wanted to test others frequencies and add some features (like voodoo sound recording) but you can use it.
Attention : it could not work on all device because of high overclocking.
Last note about this kernel : it has a bug in the battery driver (well it's not really a bug but a side effect of the overclocking) .. it show 100% battery full after some minutes even if the battery is not full ...
tucucumelo said:
Is this kernel function in Cm7?
Click to expand...
Click to collapse
No because the initramfs is for froyo.
jazux said:
wrong section, wrong tags at topic and finally i think everybody (ROM makers) know that
Click to expand...
Click to collapse
Section -> Right
Tages -> Corrected
ROM Makers -> I guess aren't aware because I overshot marcellusbe and posted this here before the release. My bad
is voodoo sound enabled?
shr33kant said:
is voodoo sound enabled?
Click to expand...
Click to collapse
Yes it is
So fast This Kernel is very good ;p no lags on 1,3 ghz
guziolek91 said:
So fast This Kernel is very good ;p no lags on 1,3 ghz
Click to expand...
Click to collapse
I know! I can't wait for the official release!
Okay so I just installed this kernel and it's absolutely epic. You remember that thread I made with the skipping music? Well I'll have to ask Haree to delete it now because it was probably the kernel. Using this kernel i had Angry Birds Rio AND Poweramp running music and it didn't skip a beat. I'm using Krillos 5.7 and the new setcpu seems to have some new governors! Savagedzen, smartass and minmax. I'm using SavagedZen and it's running very very nice. It would also appear that it has the option to undervolt within it! and to think i was considering changing to a stock rom....pffff
Edit: Just added doing a full titanium backup to that list of stuff going on at the same time and STILL no music stuttering!
shr33kant said:
Okay so I just installed this kernel and it's absolutely epic. You remember that thread I made with the skipping music? Well I'll have to ask Haree to delete it now because it was probably the kernel. Using this kernel i had Angry Birds Rio AND Poweramp running music and it didn't skip a beat. I'm using Krillos 5.7 and the new setcpu seems to have some new governors! Savagedzen, smartass and minmax. I'm using SavagedZen and it's running very very nice. It would also appear that it has the option to undervolt within it! and to think i was considering changing to a stock rom....pffff
Click to expand...
Click to collapse
I realized that this Kernel was amazing when I saw Asphalt working brilliantly! Waiting for the official release. It might take a while as marcellusbe right now has his hands full with the CM7 port
For now, the Pre-Release version will do!
I have successfully overclocked the Sidekick 4G to 1.0GHz. This spead is good enough to get +1300 in Quadrant . 1.0GHz is a 15% overclock and makes this fast phone even faster and snappier in day to day usage.
Video :
Will post a video once i get my Vibrant 4G back tommorrow .
A 1.0GHz overclock :
http://imageshack.us/photo/my-images/339/1308883399815.jpg/
Quadrant Score :
http://imageshack.us/photo/my-images/197/1308883308869.jpg/
Antutu System BenchMark :
http://imageshack.us/photo/my-images/269/1308883888341.jpg/
It's still settling in that's why it's at 1200 , it was just at 1400 now it's at 1200 , for some reason it keep's changing . It reach's +1800 in AnTutu's benchmark . Will Post updated picture's when everything settle's in . "Stock is at 1000GHz i just pushed it to 1000GHz w/ a ROM & bali V3 hitting 1.5k almost 1.6k
6/23 : Reached 1500 in Quadrant .
6/23 : Reached 1900 in AnTutu Benchmark .
isnt it clocked at 1 ghz???
matistight said:
isnt it clocked at 1 ghz???
Click to expand...
Click to collapse
Without OCing it it's at 100MHz . & nobody else can OC it .
fawkReviewz said:
Without OCing it it's at 100MHz . & nobody else can OC it .
Click to expand...
Click to collapse
Lol I hope that was a typo... no android phone is clocked at 100mhz! I'm pretty sure a cheapo flip phone has at least the equivalent of a 100mhz processor.
According to T-Mobile the Sidekick 4g is already at 1ghz. I don't see what you did here.
Sent from my GSB Eris
I been having setcpu since I 1st rooted my phone and it always been 1kmhz 0_0 idk
Sent from my SGH-T839 using XDA Premium App
jomarxx said:
I been having setcpu since I 1st rooted my phone and it always been 1kmhz 0_0 idk
Sent from my SGH-T839 using XDA Premium App
Click to expand...
Click to collapse
Im on a new Bali_SK4G_V2.1 , so now im testing might be more .
Cross your finger's for +1500 in quadrant hehe . * Tested * & reached 1500 on quadrant .
Bali_SK4G_V2.1 will come out tonight ,
updated kernel, setcpu maxed out, quadrant of 1409... Nice.
I am not using included launcher(s) with the customer rom (smooth maximus) I am using GoLancher. that might be making the difference, I dont know.
How are you guys getting 1500?
Btw, while its nice to get such high quadrant, there is no way I would keep cpu maxed, battery would suck @#$%. Setting cpu back to normal.
...well @#$%, just ran quadrant again... Setcpu Max at max, min at min, ondemand... and got 1451.
anyway, NICE WORK!
This thread is a joke
Sent From My Rooted Sidekick 4g XDA Premium App
Can you please stop posting stuff that has nothing to do with development in the development section? Your sidekick is not overclocked, it did 1ghz out of the box. Unless you are going to build a rom or kernel you do not need to start a new thread here you are causing the development section to be overloaded with junk
....seriously
fawkReviewz said:
Without OCing it it's at 100MHz . & nobody else can OC it .
Click to expand...
Click to collapse
Do you have any experience with "overclocking" ?
Our kernels are set to clock at a max of 1000Mhz (goes lower when it doesnt need that much power)
you arent running at a higher clock rate of 1000Mhz meaning you didnt overclock anything. you have too many threads in the development section that are just nonsense or just dont belong here. Please do research before posting
jahnbodah said:
updated kernel, setcpu maxed out, quadrant of 1409... Nice.
I am not using included launcher(s) with the customer rom (smooth maximus) I am using GoLancher. that might be making the difference, I dont know.
How are you guys getting 1500?
Btw, while its nice to get such high quadrant, there is no way I would keep cpu maxed, battery would suck @#$%. Setting cpu back to normal.
...well @#$%, just ran quadrant again... Setcpu Max at max, min at min, ondemand... and got 1451.
anyway, NICE WORK!
Click to expand...
Click to collapse
Thank's bro , i reached 1500 yesterday night ,
ayoteddy said:
Do you have any experience with "overclocking" ?
Our kernels are set to clock at a max of 1000Mhz (goes lower when it doesnt need that much power)
you arent running at a higher clock rate of 1000Mhz meaning you didnt overclock anything. you have too many threads in the development section that are just nonsense or just dont belong here. Please do research before posting
Click to expand...
Click to collapse
All you had to do was shoot me a PM , where is this support to go general ? lol .
You did not overclock this phone. The Hummingbird SoC in this phone has a stock clock speed of 1Ghz. All you did was change the governor to not allow the CPU to fall below the 1Ghz speed. Please research overclocking before you post threads about how you know everything about this phone.
Edit: I feel bad for bumping this post. Sorry guys.
Rofl noob. Sk4g is already 1ghz and lol I get a quad score of 1335 on my. Mytouch slide oced at 864mhz come back when u have oced ur sk4g and I don't mean stock 1ghz I mean 1.1ghz or faster then u will have oced
kitila said:
Rofl noob. Sk4g is already 1ghz and lol I get a quad score of 1335 on my. Mytouch slide oced at 864mhz come back when u have oced ur sk4g and I don't mean stock 1ghz I mean 1.1ghz or faster then u will have oced
Click to expand...
Click to collapse
Sorry well i pushed it to 1GHz , it's obv not once i went into SetCPU it was below 1GHz , Sorry
Explain how u oc to 1ghz when its stock 1ghz I mean explain it how? I'm lost ....so ur saying the sk4g is not 1ghz or ur saying u can't get more then 1ghz cuz there is no oc kernel for sk4g
kitila said:
Explain how u oc to 1ghz when its stock 1ghz I mean explain it how? I'm lost ....so ur saying the sk4g is not 1ghz or ur saying u can't get more then 1ghz cuz there is no oc kernel for sk4g
Click to expand...
Click to collapse
I changed the title + thread , .
fawkReviewz said:
I changed the title + thread , .
Click to expand...
Click to collapse
Lol
Sent from my SGH-T839 using XDA Premium App
fawkReviewz said:
Sorry well i pushed it to 1GHz , it's obv not once i went into SetCPU it was below 1GHz , Sorry
Click to expand...
Click to collapse
You didn't push it to 1ghz it was already clocked at that it is a hummingbird processor. You need to change the title of the thread to "I'm bored, watch me gloat about quadrant scores"
http://www.phonearena.com/phones/T-Mobile-Sidekick-4G_id5158
Read the specs
xmeatizmurderx said:
You didn't push it to 1ghz it was already clocked at that it is a hummingbird processor. You need to change the title of the thread to "I'm bored, watch me gloat about quadrant scores"
http://www.phonearena.com/phones/T-Mobile-Sidekick-4G_id5158
Read the specs
Click to expand...
Click to collapse
How about you stop being so ****ing rude and help me .
Nobody's gloating about Quadrant score's , Im the only one who seen me reach 1500 in quadrant . Everybody is 1000-1300
Hello everybody I looked all over the Infuse Forums for a Safe OverClock Speed... but i couldnt find anything... so im sry if i missed it... Does anybody know of safe number? thanks in advanced!!
seijyennite said:
Hello everybody I looked all over the Infuse Forums for a Safe OverClock Speed... but i couldnt find anything... so im sry if i missed it... Does anybody know of safe number? thanks in advanced!!
Click to expand...
Click to collapse
All CPU's are different. Some phones will have no problem running at 1.6ghz. Some will. It's a trial and error thing.
If you are worried, start conservative and work your way up.
would you say that overclocking your phone is worth it? i know that it can really improve the performance of the phone... but it greatly decreases the battery life... and vice versa u can lower it and increase bat life n lower performance. im looking at opinions also thanks for the reply!!
seijyennite said:
would you say that overclocking your phone is worth it? i know that it can really improve the performance of the phone... but it greatly decreases the battery life... and vice versa u can lower it and increase bat life n lower performance. im looking at opinions also thanks for the reply!!
Click to expand...
Click to collapse
I personally have the Infusion kernel running on my phone, which allows me to OC my device, but I don't want to. I've come across no normal instance when I've found that I needed the extra power. I mainly wanted it so that I could undervolt (UV) which improves battery life.
Adding a custom ROM and also adding voodoo (most ROM's have voodoo) will increase the performance of your phone.
I'm running Infusion 2.0 on Infused 1.5.3 right now (waiting for GB HDMI capabilities...thanks AT&T) and I'm loving it.
sweet man thx for the reply!! ive been looking for a custom rom to install but just havnt found one that i like yet... i like Miui but they dont have one built for the Infuse yet... so im kinda waiting on that... but who knows when that will come out..
seijyennite said:
sweet man thx for the reply!! ive been looking for a custom rom to install but just havnt found one that i like yet... i like Miui but they dont have one built for the Infuse yet... so im kinda waiting on that... but who knows when that will come out..
Click to expand...
Click to collapse
I like how miui looks too. I'm running launcher pro with a miui icon pack installed. Compromises...
oh well!
Oh and I think some people actually do have MIUI, not sure who, but I know it does exist in some unofficial form or another for the infuse.
ah cool!! i cant wait for miui!! what is launcher pro? if u dont mind me asking...
seijyennite said:
ah cool!! i cant wait for miui!! what is launcher pro? if u dont mind me asking...
Click to expand...
Click to collapse
Launcher Pro is a homescreen alternative. You can change things up, add different transition effects.
For instance, my homescreen is attached.
EricNagel said:
I personally have the Infusion kernel running on my phone, which allows me to OC my device, but I don't want to. I've come across no normal instance when I've found that I needed the extra power. I mainly wanted it so that I could undervolt (UV) which improves battery life.
Adding a custom ROM and also adding voodoo (most ROM's have voodoo) will increase the performance of your phone.
I'm running Infusion 2.0 on Infused 1.5.3 right now (waiting for GB HDMI capabilities...thanks AT&T) and I'm loving it.
Click to expand...
Click to collapse
Sent from my SAMSUNG-SGH-I997 using XDA Premium App
EricNagel said:
I personally have the Infusion kernel running on my phone, which allows me to OC my device, but I don't want to. I've come across no normal instance when I've found that I needed the extra power. I mainly wanted it so that I could undervolt (UV) which improves battery life.
Adding a custom ROM and also adding voodoo (most ROM's have voodoo) will increase the performance of your phone.
I'm running Infusion 2.0 on Infused 1.5.3 right now (waiting for GB HDMI capabilities...thanks AT&T) and I'm loving it.
Click to expand...
Click to collapse
Ditto same setup here and i consider myself super lucky but i can push the overclock up to 1.8 with voltage control play N64 emulator (starfox,mariokart) all day long and its perfectly stable with undervolt settings..
Sent from my SAMSUNG-SGH-I997 using XDA App
EricNagel said:
I like how miui looks too. I'm running launcher pro with a miui icon pack installed. Compromises...
oh well!
Oh and I think some people actually do have MIUI, not sure who, but I know it does exist in some unofficial form or another for the infuse.
Click to expand...
Click to collapse
Mikey passed out 1-2 MIUI builds as a proof of concept on IRC a while back, but it took the existing problems with CM7 (MIUI is layered over CM7) and added new ones, so it's on hold until more of the issues with base CM7 get fixed.
mv1luv said:
Ditto same setup here and i consider myself super lucky but i can push the overclock up to 1.8 with voltage control play N64 emulator (starfox,mariokart) all day long and its perfectly stable with undervolt settings..
Sent from my SAMSUNG-SGH-I997 using XDA App
Click to expand...
Click to collapse
There's no way you took your device to 1.8 - our devices can't go past 1.6 without overclocking the system bus, and the system bus does NOT like to overclock. The best anyone has done was around 1664 MHz and it was unstable as hell for a lot of people.
Some versions of Infusion reported operating at 1.8, but that's because bedwa made some mistakes in his PLL calculations - he thought those settings would run the CPU at 1.8 but they actually ran it at around 1.55
Way to burst my bubble.. I learned something new today thankyou
mv1luv said:
Way to burst my bubble.. I learned something new today thankyou
Click to expand...
Click to collapse
fastest anyone has reported to have gotten a hummingbird legitamately that i have seen was a kernel for the fascinate that had a really goofy timing stucture and had problems with other hardware. they reported the cpu running @ 1.7ghz with the gpu and bus at some really goofy speeds and fluctuated as the cpu scaled. it looked like a total mess.
Really the highest most people can go is 1.6 stable, which is what I'm running at.
Sent from my SAMSUNG-SGH-I997 using XDA App
I downloaded setcpu but I can't tell if my phone is being overclocked... I also installed infused on my phone...not sure if that would make
a difference
Sent from my SAMSUNG-SGH-I997 using xda premium
I just downloaded voltage control but not sure exactly how to tweak it with out messing something up...anybody have a quick run down (good / bad)?
Sent from my SAMSUNG-SGH-I997
Camaro1LE said:
I just downloaded voltage control but not sure exactly how to tweak it with out messing something up...anybody have a quick run down (good / bad)?
Sent from my SAMSUNG-SGH-I997
Click to expand...
Click to collapse
I use cfq/ on demand or conservitaive.
Undervolting is hit or Miss for each phone so hard to justify what's good just try and see
Overclock- I'm at 1600 with min at 100 and have to say no issues I love Oc.
.......infuse.....Infused....infusion.........
My max is 1664 and it locks up sometimes so i backed it down to 1456. Is there a quick guide to use voltage control
Sent from my SAMSUNG-SGH-I997
Camaro1LE said:
My max is 1664 and it locks up sometimes so i backed it down to 1456. Is there a quick guide to use voltage control
Sent from my SAMSUNG-SGH-I997
Click to expand...
Click to collapse
If your on froyo use the a kernel its more stable buddy. What exactly do you need to know?
.......infuse.....Infused....infusion.........
Im running infused 1.6.0 w/ core B kernel. I read people adjusting certain areas to make it more stable and increase speed and battery...
Sent from my SAMSUNG-SGH-I997
Hi again people, wanna talk about the faux123 004 b6 kernel with u, first off the kernel is amazing when it comes to gaming and stability:good:
now people are having problems with the interactive governore as it dosent use all 4 cores properly -1 (No big Deal) cause (hamdir) talked about how u can modify the OnDemand governor and make it alot better. And he is knowing what he is talkin about!!! So big love to U 2!
so i wanna share the settings im using with my kernel.
First System Tuner
upthresehold 60- 50 is to mutch I think
downthreshold: 10
i set Auto kill : Aggressive
UC CPU : 1.4Ghz- so it wont force stay on one core at 1.5Ghz (when ur running quad mode all are hitting 1.4Ghz
Now UV : first 5 : -225mvh and all others -150mvh and it works fine 4 me (Remember al chips are made in a different way so if it dosen work for u try a bit lower. if it wont work it will just reboot to the old values!
The UV does not affect the GPU like some say it does (ULP GPU are using low power it dosent need as much juice as other GPU´s and if my CPU all 4 can hit 1.4Ghz then it cant be a problem with the 520mhz GPU!
So if ur phone lags during gaming or just in general there is something wrong with the ROM or u have installed it wrong
I always make sure i have no data cashe or any thing left when installing a rom dont even restore old apps or data cuz that can be the problem so see u soon with some talkin abou the ViperX 1.0.1 ROM!
Wrong section, unneeded thread. Is this an S3 kernel? You know that if you set down threshold to10, CPU stays on high frequencies very long? I've got an S1, and most of the games run smooth, so if you guys from S3 get speed problems, there must be something wrong .
HTC ONE X
dark_knight35 said:
Wrong section, unneeded thread. Is this an S3 kernel? You know that if you set down threshold to10, CPU stays on high frequencies very long? I've got an S1, and most of the games run smooth, so if you guys from S3 get speed problems, there must be something wrong .
Click to expand...
Click to collapse
Oh im new here so, were should i post this, and im talkin about the htc one x M8
danyshotbang said:
Hi again people, wanna talk about the faux123 004 b6 kernel with u, first off the kernel is amazing when it comes to gaming and stability:good:
now people are having problems with the interactive governore as it dosent use all 4 cores properly -1 (No big Deal) cause (hamdir) talked about how u can modify the OnDemand governor and make it alot better. And he is knowing what he is talkin about!!! So big love to U 2!
so i wanna share the settings im using with my kernel.
First System Tuner
upthresehold 60- 50 is to mutch I think
downthreshold: 10
i set Auto kill : Aggressive
UC CPU : 1.4Ghz- so it wont force stay on one core at 1.5Ghz (when ur running quad mode all are hitting 1.4Ghz
Now UV : first 5 : -225mvh and all others -150mvh and it works fine 4 me (Remember al chips are made in a different way so if it dosen work for u try a bit lower. if it wont work it will just reboot to the old values!
The UV does not affect the GPU like some say it does (ULP GPU are using low power it dosent need as much juice as other GPU´s and if my CPU all 4 can hit 1.4Ghz then it cant be a problem with the 520mhz GPU!
So if ur phone lags during gaming or just in general there is something wrong with the ROM or u have installed it wrong
I always make sure i have no data cashe or any thing left when installing a rom dont even restore old apps or data cuz that can be the problem so see u soon with some talkin abou the ViperX 1.0.1 ROM!
Click to expand...
Click to collapse
Feel free to ask questions or comment and like if this helped u pleas :angel:
danyshotbang said:
Oh im new here so, were should i post this, and im talkin about the htc one x M8
Click to expand...
Click to collapse
Maybe One X general?
dark_knight35 said:
Maybe One X general?
Click to expand...
Click to collapse
Thanks for the reply