Database Info

[Q] Help with Flashing Linkify fix to CleanRom 6? (Solved)

Yes, I'm a noob,to XDA, but I am pretty tech capable otherwise.
Yesterday, I unlocked the bootloader on my OneX, installed TWRP 2.3.x recovery, flashed CleanRom, ended up with a soft bricked the phone (still not sure what happened, but I think it was my stupid ancient work computer), tried to reinstall it, but the zip file was no longer in the SD card, tried to mount in recovery, but it was unsuccessful, tried to reinstall the 2.20 RUU, but it failed (all of these were probably B/C my work computer again). Gave up and came home. Got home to my modern PC, reformatted my SD, transferred Zips again and was finally able to get CleanROM to install correctly. All seems good, I setup the phone last night.
However, I have a problem with hyper-links that Scott has already acknowledged here:
http://forum.xda-developers.com/showpost.php?p=38936130&postcount=9922
I would have just asked this in that thread, but I don't have enough posts to write in Dev forums.
So, does anyone mind directing me to some basic instructions for 'flashing' the Link Fix Zip that Scott mentioned? I am assuming it is not the same method as installing the ROM.zip from TWRP, or is it?
After soft bricking yesterday, I'd really prefer some hand holding on this so that I don't mess up the successful CleanROM install.
Thanks in advance.

flash it in recovery just like the rom

jerrycoffman45 said:
flash it in recovery just like the rom
Click to expand...
Click to collapse
Thanks! That took all of 30 seconds plus reboot. Links working now.
Problem Solved.
Thanks Jerry!

please add solved and give thanks

DvineLord said:
please add solved and give thanks
Click to expand...
Click to collapse
Done, unless there is a tool for marking the thread "solved". I looked but didn't see anything.

NM, I figured out how to change the header.

[Q] Help with SGH-T959W only booting into recovery

Hello, all. I hope someone can help me with my SGH-T959W. Right now I'm at the point where the phone has CWM installed, but will only boot into recovery no matter what I do. I've followed the N00b guide to Flashing/Fixing the SGS4G, but clearly I'm missing something.
I tried to follow the Windows-based procedure for the SGH-T959W, but was unable to get version 1.40 to execute, and was unable to locate version 1.31.
So, given that the SGH-T959W and SGH-T959V are the same phone except for the bootloader, I tried the Java-based Stock KJ-6 + Root. The first time I tried it, the upload failed after the PIT, and the phone was no longer able to boot into anything other than download mode. I eventually managed to get it to the point where it tried to flash the modem, but I was never able to get the modem to flash successfully. I tried both under Windows and Linux, using two different PCs and every USB cable I could find, since I know those tend to be dodgy. Still, I've never gotten past flashing the modem, though sometimes it's done worse.
But at this point, I had a phone that would dutifully boot into CWM, so I could change strategy anyway. So I grabbed the unofficial Cyanogenmod 10.1, copied it to the root of the SD card, and tried to load that via CWM. It failed the hardware check.
That's problem #1. Is it possible to modify Cyanogenmod to check for the 959W instead of only the 959V?
Now, problem #2. I decided to give Slim ICS a whirl, since it's light on requirements and a 512MB/1GHz device would probably appreciate a lighter load. The two packages claim to install, but the progress bar never reaches 100%, and when I try to boot the phone, it just boots into CWM. It's a newer version of CWM now, and the startup logo is different, so something worked, but clearly not everything.
When installing, I did mount UMMU, factory reset, wipe the cache and the Davlik cache, mount UMMU, install, then fix perms. But I still get that loop back to CWM.
So something critical didn’t take, however many times I tried (I've lost count, but I think I'm going on 10), and I don't know the architecture well enough to know where to start looking. I'm pretty comfortable with other operating systems, but this is only the second Android device I've tried to customize.
I suspect I can’t solve any other problem until I solve problem #2, regardless of which distro I end up wanting to run.
Sorry for the long-winded post, but I figured the more questions I answered up front, the better the chances of fixing this would be.
Thanks for any help you're willing to offer a n00b.
Dave F.

I think what you were doing with heimdall is the way to go except the t959w doesn't like modems and I think there's some way to leave out the modem part but eh.. I'm not that well versed. Anyway here's a link that may or may not be relevant
http://forum.xda-developers.com/showthread.php?t=1956025

Please read forum rules before posting.
Questions and request for assistance go in the Q&A section.
Thread has been moved.
Thank you for your future attention to this.
Have a great day!

dfarquhar said:
Hello, all. I hope someone can help me with my SGH-T959W. Right now I'm at the point where the phone has CWM installed, but will only boot into recovery no matter what I do. I've followed the N00b guide to Flashing/Fixing the SGS4G, but clearly I'm missing something.
I tried to follow the Windows-based procedure for the SGH-T959W, but was unable to get version 1.40 to execute, and was unable to locate version 1.31.
Click to expand...
Click to collapse
Look here for 1.3.1.
dfarquhar said:
So, given that the SGH-T959W and SGH-T959V are the same phone except for the bootloader, I tried the Java-based Stock KJ-6 + Root. The first time I tried it, the upload failed after the PIT, and the phone was no longer able to boot into anything other than download mode. I eventually managed to get it to the point where it tried to flash the modem, but I was never able to get the modem to flash successfully. I tried both under Windows and Linux, using two different PCs and every USB cable I could find, since I know those tend to be dodgy. Still, I've never gotten past flashing the modem, though sometimes it's done worse.
But at this point, I had a phone that would dutifully boot into CWM, so I could change strategy anyway. So I grabbed the unofficial Cyanogenmod 10.1, copied it to the root of the SD card, and tried to load that via CWM. It failed the hardware check.
That's problem #1. Is it possible to modify Cyanogenmod to check for the 959W instead of only the 959V?
Click to expand...
Click to collapse
Nope, not a CWM issue. Ever since TeamAcid and I started on CM9 (and I believe the last few CM7 builds) added support for T959W. Almost everyone (thankfully! ) has kanged those device trees and also support T959W. I'm sure other T959W users will chime in to tell you that 97% of all roms here work on T959W. (GB and forward)
dfarquhar said:
Now, problem #2. I decided to give Slim ICS a whirl, since it's light on requirements and a 512MB/1GHz device would probably appreciate a lighter load. The two packages claim to install, but the progress bar never reaches 100%, and when I try to boot the phone, it just boots into CWM. It's a newer version of CWM now, and the startup logo is different, so something worked, but clearly not everything.
When installing, I did mount UMMU, factory reset, wipe the cache and the Davlik cache, mount UMMU, install, then fix perms. But I still get that loop back to CWM.
Click to expand...
Click to collapse
Crazy mount setups shouldn't matter anymore. That was an oldschool Froyo/Early GB thing. Almost all new CWM install scripts do the right thing now.
dfarquhar said:
So something critical didn’t take, however many times I tried (I've lost count, but I think I'm going on 10), and I don't know the architecture well enough to know where to start looking. I'm pretty comfortable with other operating systems, but this is only the second Android device I've tried to customize.
I suspect I can’t solve any other problem until I solve problem #2, regardless of which distro I end up wanting to run.
Sorry for the long-winded post, but I figured the more questions I answered up front, the better the chances of fixing this would be.
Thanks for any help you're willing to offer a n00b.
Dave F.
Click to expand...
Click to collapse
I like the long posts! Especially when then they contain more detail for me to help you figure out your problem with. I'm also partial to the short posts that include logs!
TwitchyEye said:
I think what you were doing with heimdall is the way to go except the t959w doesn't like modems and I think there's some way to leave out the modem part but eh.. I'm not that well versed. Anyway here's a link that may or may not be relevant
http://forum.xda-developers.com/showthread.php?t=1956025
Click to expand...
Click to collapse
@TwitchyEye you're right That is the heimdall oneclick that should be used.
@dfarquhar I think using the heimdall oneclick that @getochkn made should be the right path for you. Make sure you use the right version of heimdall. Make sure you completely remove the old version (software and drivers), use zdiag to make absolutely sure!
If all else fails, post here again! (maybe with logs )

Thanks everyone. I grabbed v 1.3.1, so I'm getting ready to try it now.
If anything goes wrong, I'll look into where the logs are stored and how to retrieve them, and I'll be back. Assuming I can't use the logs to figure it out on my own of course.

dfarquhar said:
Thanks everyone. I grabbed v 1.3.1, so I'm getting ready to try it now.
If anything goes wrong, I'll look into where the logs are stored and how to retrieve them, and I'll be back. Assuming I can't use the logs to figure it out on my own of course.
Click to expand...
Click to collapse
Sometimes, it's just the output you see on your screen is a good enough log

bhundven said:
Sometimes, it's just the output you see on your screen is a good enough log
Click to expand...
Click to collapse
Got it working! Heimdall 1.3.1 was the key. I then turned around and flashed Slim ICS since I had it on the SD card already, and it worked. I'm debating whether to move on to Slim Bean, but maybe I need to leave well enough alone for a few days now that I have a working phone.
Thanks again,
Dave

[Q] i535 - Custom Recoveries Cannot Mount Anything!

UPDATE: See post #5 for the fix. It's really simple!
Hi,
First of all, I've been using this website as a resource for the last couple years. THANK YOU to all of you who dedicate your free time to helping the Android community!!!
K, now on to the issue:
This isn't my first rodeo. I'm not a dev, but I have a lot of experience with the Verizon S3. This is the second one I've owned, and I bought it off of craigslist. I'm starting to wonder if there's something wrong with the internal memory.
Stock recovery works perfectly, but both ClockworkMod and TWRP cannot mount anything -- cache, data, internal/external SD, etc.
My only computer is a MacBook Pro, and I have been using Odin 3.07 running inside a VMWare Fusion virtual machine running Windows 8.1. Luckily, Odin gets me back to stock every time, but I really need to get a custom recovery so I can get away from Touch Wiz.
I have tried 2 different versions of Casual as well as manually pushing everything through Odin.

jmsclbwmn said:
Hi,
First of all, I've been using this website as a resource for the last couple years. THANK YOU to all of you who dedicate your free time to helping the Android community!!!
K, now on to the issue:
This isn't my first rodeo. I'm not a dev, but I have a lot of experience with the Verizon S3. This is the second one I've owned, and I bought it off of craigslist. I'm starting to wonder if there's something wrong with the internal memory.
Stock recovery works perfectly, but both ClockworkMod and TWRP cannot mount anything -- cache, data, internal/external SD, etc.
My only computer is a MacBook Pro, and I have been using Odin 3.07 running inside a VMWare Fusion virtual machine running Windows 8.1. Luckily, Odin gets me back to stock every time, but I really need to get a custom recovery so I can get away from Touch Wiz.
I have tried 2 different versions of Casual as well as manually pushing everything through Odin.
Click to expand...
Click to collapse
It should work. Once latest version of casual is done try upgrading to latest version of whichever recovery you are gonna use. All the recoveries in casual are out of date and may just need to reflash recovery. Sounds like gonna use AOSP base so might as well stick with CWM as that is what you are going to end up with and what the AOSP devs support. While on TW can try upgrading it also as it the dev preferred recovery on TW. Shouldn't be the Mac if everything is actually unlocked, rooted and is flashing a recovery.

prdog1 said:
While on TW can try upgrading it also as it the dev preferred recovery on TW.
Click to expand...
Click to collapse
Can you please clarify this particular thought for me? I understood everything else.

jmsclbwmn said:
Hi,
First of all, I've been using this website as a resource for the last couple years. THANK YOU to all of you who dedicate your free time to helping the Android community!!!
K, now on to the issue:
This isn't my first rodeo. I'm not a dev, but I have a lot of experience with the Verizon S3. This is the second one I've owned, and I bought it off of craigslist. I'm starting to wonder if there's something wrong with the internal memory.
Stock recovery works perfectly, but both ClockworkMod and TWRP cannot mount anything -- cache, data, internal/external SD, etc.
My only computer is a MacBook Pro, and I have been using Odin 3.07 running inside a VMWare Fusion virtual machine running Windows 8.1. Luckily, Odin gets me back to stock every time, but I really need to get a custom recovery so I can get away from Touch Wiz.
I have tried 2 different versions of Casual as well as manually pushing everything through Odin.
Click to expand...
Click to collapse
You must have a newer GS3, the newer devices (made within the past few months) have a higher revision internal card reader that breaks some recoveries. (I know because I flashed a sprint gs3 that had the same exact issue).
The fix for this is to have a recovery built with the fix in it, which is upstream in the cm-10.2 kernel, but not in any official recoveries yet.
Let me see if I can find the exact commit for you... I know invisiblek fixed it
EDIT: heres the sprint thread of info (DO NOT FLASH THE FILES THO THEY WILL MESS UP THE VZW GS3)
http://forum.xda-developers.com/showthread.php?t=2391616&page=31

I found another thread on here with a guy having the exact same issue. That thread combined with the above information about outdated recovery images guided me to my solution. Here's how simple it was:
1) Use Casual to root/unlock.
2) Download Flashify
3) Download most recent ClockworkMod Recovery image
4) Use Flashify to flash said image
I really hope this info helps someone else!

jmsclbwmn said:
I found another thread on here with a guy having the exact same issue. That thread combined with the above information about outdated recovery images guided me to my solution. Here's how simple it was:
1) Use Casual to root/unlock.
2) Download Flashify
3) Download most recent ClockworkMod Recovery image
4) Use Flashify to flash said image
I really hope this info helps someone else!
Click to expand...
Click to collapse
Oh man! Thanks for posting how you got it to work. I've been trying to figure out what to do for almost 2 days.
I would of probably still be googling away if I hadn't found this. Thanks!

[Q] NAND Write Start Fail in Odin

Hi all,
for the last three days I've been carrying around a paper weight that looks remarkably like my Galaxy S3...
Anyway, I'm at a point where I don't know what else I could (or should) try. Today I thought I had a winner when I came across this thread: http://forum.xda-developers.com/showthread.php?t=1840030
I thought wrong. Flashing the bootchains works but then when I try flashing the root66.tar in Odin it always fails during NAND Write Start. I have seen people in the above thread with the same problem and then "never mind, I fixed it"-posts without explanations what they actually did... So, if you managed to fix it or know how to fix it, how does it work?
(I can't post in the same thread because I have less than 10 posts..)
Any input would be highly appreciated!
Thanks a lot and happy new year!
Cheers

In detail what did you do before this problem.

ThePagel said:
In detail what did you do before this problem.
Click to expand...
Click to collapse
Hm... a lot of (probably not very wise) things... Let's see...
It all started when I updated CM10.2 to a nightly release. Something went wrong, not sure what. I was talking to someone and when I checked my phone again it was just sitting there in TWPR and wouldn't boot up anymore (stuck in Cyanogen splash screen). I was still able to boot back into recovery and then tried flashing the stable CM10.2, which it didn't do. I factory reset the phone, tried flashing again, to no avail. The error message was that E: data something was missing or not accessible. From then on it's kind of a blur what I actually did, the list includes:
- trying to flash back to stock in Odin
- trying to flash new recovery in Odin
- trying to flash a pit file
- trying to install new firmware in Kies (after downloading the firmware Kies would just quit (PC), or not even download it and tell me that it's not posfible with my phone (Mac))
- trying the method described in the linked thread
At some point I wasn't even able anymore to boot into recovery (I think that was when I tried to flash a new recovery).
Thanks

I had a similar problem a while back: ODIN wouldn't flash anything and I could no longer get to recovery, etc.
I had been running Odin on Windows XP within a Virtual Machine, something that had never been a problem for me in the past. I ran it on native Windows and it flashed fine (root66.tar). If you're running ODIN inside a VM, try that.
http://forum.xda-developers.com/showthread.php?p=47886084#post47886084
-Joe

joeinternet said:
I had a similar problem a while back: ODIN wouldn't flash anything and I could no longer get to recovery, etc.
I had been running Odin on Windows XP within a Virtual Machine, something that had never been a problem for me in the past. I ran it on native Windows and it flashed fine (root66.tar). If you're running ODIN inside a VM, try that.
http://forum.xda-developers.com/showthread.php?p=47886084#post47886084
-Joe
Click to expand...
Click to collapse
Interesting. I am indeed running Windows in a VM... Need to try that later today. I'll report back later in the pm. Thanks!

IT'S BACK ALIVE! Thanks, Joe! Using a native Windows machine did the trick. I didn't use Odin, though, but did a firmware reset in Kies (was easier to do at work). Anyway, phone is up and running again. Next steps are getting CM back...
Thanks again!

Mungo Park said:
IT'S BACK ALIVE! Thanks, Joe! Using a native Windows machine did the trick. I didn't use Odin, though, but did a firmware reset in Kies (was easier to do at work). Anyway, phone is up and running again. Next steps are getting CM back...
Thanks again!
Click to expand...
Click to collapse
Be careful using kies in the future. If they start pushing 4.3 you will be screwed.

Haven't thought about that. It was still 4.1.2 and I'm back on CM10.2.
Thanks!

[Q] Lg Ls620 (realm) custom recovery

I was trying to find a custom recovery, or any recovery that will work on my lg realm. I boot recovery and it gives me a error message so im guessing its either wiped out or blocked...any ideas out there on how to correct or replace it

twtoned said:
I was trying to find a custom recovery, or any recovery that will work on my lg realm. I boot recovery and it gives me a error message so im guessing its either wiped out or blocked...any ideas out there on how to correct or replace it
Click to expand...
Click to collapse
Looking for one as well. I have not found one.

Recovery is actually preinstalled
I found this just tooling around. Use your favorite file browser, I used
Total commander. /system/vender/itson
The zip file is there. Hope this helps. (Rooted LG ls620)

Could you explain in a little better detail on what you mean Enigmatic177... I'm pulling my hair out Hehe

If anyone makes or finds a working recovery please post it.

Itson is a zip file that was installed after last update it has the basics to unlock the boot loader. I unpacked it used Rom toolbox pro rebooted to RECOVERY did regular reboot system upgraded.
A couple if bit mapp errors 11111. Then I basically flashed CWM.
Before you do this the partitions change from ext2-ext4. I'd advise
Backing them up.

LG Realm & exceed 2 TWRP recovery/fastboot files
No computer needed!!!
Lg realm & exceed 2 twrp custom recovery/fastboot downloade
All you need to do is follow the steps in the read me and you will have the recovery or fast boot to do as you please! Make sure u do a backup!!!!!!
I spent countless hours trying to do this and i finaly got it to work
Now all we need is them roms please make some if you can wold like cm12!
Sorry for not spacing the link im a newb so i cant post links yethttps://mega.co.nz/#!FVQ0GSaI!525LBPtwo696CvZrjY032tKkfS7aaURG-xATm2uzWhw

TWRP recovery help L620 LG Realm
hello I followed the steps in the read me file and i succeeded in installing twrp although im having troubles booting up to my system os. when i power on my device it takes me straight to twrp. i have a feeling i might of missed a step. i tried creating a backup but i cant because i noticed my screen turns off fast. do you think you might know what might be the problem why i cant boot up to my os? thanks!

I think i know what seems to be the problem. I think i might have accidentally replaced the boot img with the twrp recovery img. i did not make a backup before this happened. is there anything i can do to make my phone boot up to its normal image? thanks

Nope. It is officially a paperweight and no one I know of has access to the stock ROM either.
Sent from my LGLS620 using XDA Premium 4 mobile app

Hey
Has anybody found a custom rom?

Finally. Easy as pie
Ok, I downloaded an image (w5c_twrp_bumped.img)
put that img on the root of my sd card
downloaded Rashr from the google play store
opened rashr and tapped 'recovery from storage', navigated to external sd and tapped the image and tapped
ýes please'
flashed it. after the flash the phone rebooted into the twrp recovery.
then just rebooted back into the system
worked perfectly.
im new here im not allowed to post outside links yet, just google "w5c_twrp_bumped.img" should take you to a link for a download of that recovery
i got twrp now as a custom recovery. on my lg realm.

That_One_Person760 said:
hello I followed the steps in the read me file and i succeeded in installing twrp although im having troubles booting up to my system os. when i power on my device it takes me straight to twrp. i have a feeling i might of missed a step. i tried creating a backup but i cant because i noticed my screen turns off fast. do you think you might know what might be the problem why i cant boot up to my os? thanks!
Click to expand...
Click to collapse
You have the bumped recovery so all i can say if u messed up is to flash a stock rom u can find on google i had to re flash mine a few times messing with root

right on, thanks for the info. I had no problems at all. it all fell in place like i was hoping. The Realm is the easiest device Iv ever rooted, flashed, and messed with. Well, as far as rooting and flashing a custom recovery. dunno bout roms though. Im sure its simple?

The_android_Modder said:
No computer needed!!!
Lg realm & exceed 2 twrp custom recovery/fastboot downloade
All you need to do is follow the steps in the read me and you will have the recovery or fast boot to do as you please! Make sure u do a backup!!!!!!
I spent countless hours trying to do this and i finaly got it to work
Now all we need is them roms please make some if you can wold like cm12!
Sorry for not spacing the link im a newb so i cant post links yethttps://mega.co.nz/#!FVQ0GSaI!525LBPtwo696CvZrjY032tKkfS7aaURG-xATm2uzWhw
Click to expand...
Click to collapse
OK, I grabbed and extracted this. I used Flashify to simply flash the recovery (w5c_twrp_bumped.img) and it works like a dream on my LG Realm.
OTOH, trying the same on an Exceed 2 gets me TWRP, but it cannot mount much of anything and the backup fails. After failing, it tells me "No OS found, continue?" I continue and get the message "Appears your device has no Root, install now?' I am absolutely certain I have root, or wouldn't even be able to run Flashify, so I continue and it simply boots into the OS just fine. Perhaps the readme isn't complete, as I see the following file in the extracted folder (resources.zip) with no explanation of why it's there. It "appears" to be a flash-able zip that installs "itson" (whatever THAT is). Note that the Realm has this in the /system/vendor/itson, yet the Exceed 2 doesn't.
Have you actually used this on an Exceed 2? And if so, what am I missing here?

The_android_Modder said:
No computer needed!!!
Lg realm & exceed 2 twrp custom recovery/fastboot downloade
All you need to do is follow the steps in the read me and you will have the recovery or fast boot to do as you please! Make sure u do a backup!!!!!!
I spent countless hours trying to do this and i finaly got it to work
Now all we need is them roms please make some if you can wold like cm12!
Sorry for not spacing the link im a newb so i cant post links yethttps://mega.co.nz/#!FVQ0GSaI!525LBPtwo696CvZrjY032tKkfS7aaURG-xATm2uzWhw
Click to expand...
Click to collapse
Link is DEAD. Any chance you can reupload this file? I can't make heads or tails of some of this thread and I don't want to destroy this phone. Thanks!!!

petermg said:
Link is DEAD. Any chance you can reupload this file? I can't make heads or tails of some of this thread and I don't want to destroy this phone. Thanks!!!
Click to expand...
Click to collapse
I'll do you one better. Just forget about the post you replied to, as it's convoluted as hell. Install TWRP 2.8.6 from here. Ignore the big red warning about the Realm, as he evidently hasn't updated the OP. You can view my notes regarding the Realm in this reply. Tested several times and verified working better than anything else available. Easiest recovery to install I've ever dealt with (all done with an .apk). The option to access via cold boot (battery pull procedure) is something to behold
Be sure to thank the developer, even if you need to create an account to do so. Very VERY nice work!

fathergweedo said:
I'll do you one better. Just forget about the post you replied to, as it's convoluted as hell. Install TWRP 2.8.6 from here. Ignore the big red warning about the Realm, as he evidently hasn't updated the OP. You can view my notes regarding the Realm in this reply. Tested several times and verified working better than anything else available. Easiest recovery to install I've ever dealt with (all done with an .apk). The option to access via cold boot (battery pull procedure) is something to behold
Be sure to thank the developer, even if you need to create an account to do so. Very VERY nice work!
Click to expand...
Click to collapse
THANK YOU!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Before you replied I installed the version 2.8.5 from here:
http://androidforums.com/threads/twrp-2-8-5-0-for-realm-ls620-and-exceed-2-vs450pp.908704/
Is 2.8.6 better? Looks like the 2.8.5 can't be booted into via key combo from power off? Are there any other differences? I just used the Rashr flash tool from the market to flash 2.8.5. Worked flawlessly. This is actually my mom's phone and it wanted to do a system upgrade but I wanted to back it up first so that's the reason I wanted a recovery.
Pretty cool though, this recovery installs just via an APK!!!? That's amazing!
I'm tempted to install this on her phone next time she comes over... it should be fine right?
Thanks again!!!!!!!!!!

petermg said:
THANK YOU!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Before you replied I installed the version 2.8.5 from here:
http://androidforums.com/threads/twrp-2-8-5-0-for-realm-ls620-and-exceed-2-vs450pp.908704/
Is 2.8.6 better? Looks like the 2.8.5 can't be booted into via key combo from power off? Are there any other differences? I just used the Rashr flash tool from the market to flash 2.8.5. Worked flawlessly. This is actually my mom's phone and it wanted to do a system upgrade but I wanted to back it up first so that's the reason I wanted a recovery.
Pretty cool though, this recovery installs just via an APK!!!? That's amazing!
I'm tempted to install this on her phone next time she comes over... it should be fine right?
Thanks again!!!!!!!!!!
Click to expand...
Click to collapse
That one will cold boot with the battery pull procedure too. A little further down that thread you'll see I modded it to work correctly with the Exceed 2 in addition to the Realm. I like the 2.8.6 better if only that the dates of the backup are correct now. The 286.apk will work fine and overwrite your current recovery. If you leave it installed, you can always open it and reboot to recovery from within the app. If I have more time I'll post a screenshot, but running late for work. I think the screen dimming/timeout issue was fixed as well, but I haven't verified that. I normally disable that in TWRP anyway, as I like to monitor what it's doing during a backup/restore in case of errors.

fathergweedo said:
That one will cold boot with the battery pull procedure too. A little further down that thread you'll see I modded it to work correctly with the Exceed 2 in addition to the Realm. I like the 2.8.6 better if only that the dates of the backup are correct now. The 286.apk will work fine and overwrite your current recovery. If you leave it installed, you can always open it and reboot to recovery from within the app. If I have more time I'll post a screenshot, but running late for work. I think the screen dimming/timeout issue was fixed as well, but I haven't verified that. I normally disable that in TWRP anyway, as I like to monitor what it's doing during a backup/restore in case of errors.
Click to expand...
Click to collapse
THANKS!!!! I'll make it a point to flash that to my mom's phone next time I get the chance!