I currently have the unofficial CM9 ROM by Entropy.
I want to try out JB's ULTRA CM9 Build and was wondering if I can flash into JB's build from the Entropy's ROM/blue CWM?
http://forum.xda-developers.com/showthread.php?t=1690854
Yup just wipe data cache and davlik and you should be good to go.. Or even better qwikster has a fantastic wipe script which I use every time I flash a new rom.
I am not stuck in a bootloop that leads me to the blue CWM...
ismethajametovic said:
I am not stuck in a bootloop that leads me to the blue CWM...
Click to expand...
Click to collapse
You should be able to with no problems...I did, ok did you do the following within blue CWM?
Wipe/Factory Reset
Go to mounts and storage and format system, data, and cache
Flash rom zip file
go back in CWM and do the above...see if you get it, hope you have a good full charge on your battery...
I did that and was still stuck in bootloop that leads to the blue CWM.
I bit the bullet and just reverted back to stock ROM (since I was at the point of no return anyway...)
Anywho, I managed to flash it the way I always use.
ismethajametovic said:
I did that and was still stuck in bootloop that leads to the blue CWM.
I bit the bullet and just reverted back to stock ROM (since I was at the point of no return anyway...)
Anywho, I managed to flash it the way I always use.
Click to expand...
Click to collapse
Good job, you accomplish what some seem to make a road block, at least you got it going...
OMG, JB's integrated Entropy's ROM is blazing fast...
I did notice the back of the phone getting hot when I overclocked it to 1600mhz. So, I put it back to stock 1200mhz.
Related
Can I just buy ROM Manager pro and let the nightlies automatically update, or do I have to flash via cwm? If I have to flash via cwm do I need to wipe data? I want to be able to go back and forth between roms as well and need to know the best process for doing that.
Do not use ROM manager, for anything. Seriously, it's bad news. Just download the nightlies and flash through recovery the regular way.
i use rom manager to download them, but then i boot into recovery myself and back-up then i flash the new rom. been doing it like this for awhile now with no problems.
You can flash though rom manager. Where you will get stuck is if you get into a situation where you can't boot your OS, you can only boot into cwm if you've flashed using the nvflash method.
G2X CM7
Better not use Rom Manager. CWM Flash is very easy so there is no need to risk it.
krekabl said:
Better not use Rom Manager. CWM Flash is very easy so there is no need to risk it.
Click to expand...
Click to collapse
Rom manager uses cwm. You can use rom manager just fine. You just need to have cwm properly flashed using the nvflash method in case you get stuck in a boot loop and need to get back into recovery using power+ volume down.
G2X CM7
If I am changing nightlies do I need to do a full data/cache wipe?
Beggars1923 said:
If I am changing nightlies do I need to do a full data/cache wipe?
Click to expand...
Click to collapse
No. Just wipe cache and dalvik cache then install the update and reboot.
G2X CM7
You need to do a full wipe when you're switching between different roms, like from stock to CM7.
G2X CM7
I have cm9 and want to go back to stock type roms.. less bugs..
anyway, how do I do this? I did a full wipe and restored hydro but the kernel stays on CM9 kernel.. and wifi wont turn on...
You need to flash the actual .30 zip from asus. That returns you to stock. Then do a custom recovery/root and THEN flash hydro.
thatisandwas said:
You need to flash the actual .30 zip from asus. That returns you to stock. Then do a custom recovery/root and THEN flash hydro.
Click to expand...
Click to collapse
Wow, that sucks..... thanks for the help tho. Think I'll just stick to cm9. I got it working well and its fast.
try hydro. Izs based on stock and is one of the fastest roms out there.
hdjoe said:
Wow, that sucks..... thanks for the help tho. Think I'll just stick to cm9. I got it working well and its fast.
Click to expand...
Click to collapse
Which recovery do you have? Flash the latest twrp recovery and you can flash hydro without the need to return to stock. Simply download the newest base for hydro. You can also flash clean rom over cm9 without returning to stock. Make sure that you wipe cache, dalvic, factory data reset, and format system.
dxwilliams40 said:
Which recovery do you have? Flash the latest twrp recovery and you can flash hydro without the need to return to stock. Simply download the newest base for hydro. You can also flash clean rom over cm9 without returning to stock. Make sure that you wipe cache, dalvic, factory data reset, and format system.
Click to expand...
Click to collapse
I'm on cwm. Still. Formatting system won't wipe everything off my internal memory will it? I have about 15 movies , and a bunch of snes games....
Hello,
I was running the CM10 Alpha 2 for my GSII. Alpha 3 came out so I decided to update. I installed the newest CWM and the alpha 3 package, gapps and darkside wipe.
When installing I had no problems that I noticed. Everything said it worked fine. However, once rebooting the phone after darkside wipe finished, I couldn't boot up my phone. I can get past the Samsung screen, but I don't even make it to the CM animation boot screen.
I decided to pull the battery after waiting a while and go back into recovery. I did this and decided to restore my backup. My phone is stuck on "Restoring .android_secure" right now and will not work.
I can use Odin to flash back to ICS and how to came but I'm wondering why it didn't work? I know I did the procedure right, as I did it when flashing CM10 alpha 1, 1a and 2. I read about needing the latest CWM for it so I got that, too. A bit of a weird issue that I'd post in the CM10 thread if I had over ten posts.
Thanks in advance to those who can help!
Droid111 said:
Hello,
I was running the CM10 Alpha 2 for my GSII. Alpha 3 came out so I decided to update. I installed the newest CWM and the alpha 3 package, gapps and darkside wipe.
Click to expand...
Click to collapse
I followed basically the same pattern and didn't have an issue, aside from the fact that I didn't Darkside wipe (if you are using the latest clockwork touch I don't think it's necessary anymore). I also flashed the instigator kernel (6.2.1) but that was after I rebooted without issue.
Sidenote, the instigator 6.2.1 seems to possibly have some overheating trouble, so I am running the Darkside Hercules kernel for the moment, and it seems to be working well.
Phizban said:
I followed basically the same pattern and didn't have an issue, aside from the fact that I didn't Darkside wipe (if you are using the latest clockwork touch I don't think it's necessary anymore). I also flashed the instigator kernel (6.2.1) but that was after I rebooted without issue.
Sidenote, the instigator 6.2.1 seems to possibly have some overheating trouble, so I am running the Darkside Hercules kernel for the moment, and it seems to be working well.
Click to expand...
Click to collapse
Yeah, reading the thread it seems like a pretty rare problem. Somebody actually posted something similar yesterday that I missed and nobody really knew. I wasn't sure if I should Darkside wipe or not so I chose to anyways. I haven't tried flashing a new kernal but as I said I can't even get to the boot animation.
Droid111 said:
Yeah, reading the thread it seems like a pretty rare problem. Somebody actually posted something similar yesterday that I missed and nobody really knew. I wasn't sure if I should Darkside wipe or not so I chose to anyways. I haven't tried flashing a new kernal but as I said I can't even get to the boot animation.
Click to expand...
Click to collapse
I would stay away from the darkside wipe, it has been reported through many threads that it can sometimes lead to problems when installing a rom. Your best bet is to just wipe data, format system, wipe dalvik cache, either format /cache or use Darksidewipe.cache not the darkside wipe that's wipes everything. Then install rom and gapps. Reboot phone and let it sit for 5 to 10 minutes, (i usually let it sit 10). From there you can decide if you want to flash one of the two available kernels, results may very with the two.
mjwhirly said:
I would stay away from the darkside wipe, it has been reported through many threads that it can sometimes lead to problems when installing a rom. Your best bet is to just wipe data, format system, wipe dalvik cache, either format /cache or use Darksidewipe.cache not the darkside wipe that's wipes everything. Then install rom and gapps. Reboot phone and let it sit for 5 to 10 minutes, (i usually let it sit 10). From there you can decide if you want to flash one of the two available kernels, results may very with the two.
Click to expand...
Click to collapse
Thanks for the help. I'm going to try it within the next few days. Right now I have SKY-ICS going fine but I'll definitely try that.
What do the different kernels do?
Droid111 said:
Hello,
I was running the CM10 Alpha 2 for my GSII. Alpha 3 came out so I decided to update. I installed the newest CWM and the alpha 3 package, gapps and darkside wipe.
When installing I had no problems that I noticed. Everything said it worked fine. However, once rebooting the phone after darkside wipe finished, I couldn't boot up my phone. I can get past the Samsung screen, but I don't even make it to the CM animation boot screen.
I decided to pull the battery after waiting a while and go back into recovery. I did this and decided to restore my backup. My phone is stuck on "Restoring .android_secure" right now and will not work.
I can use Odin to flash back to ICS and how to came but I'm wondering why it didn't work? I know I did the procedure right, as I did it when flashing CM10 alpha 1, 1a and 2. I read about needing the latest CWM for it so I got that, too. A bit of a weird issue that I'd post in the CM10 thread if I had over ten posts.
Thanks in advance to those who can help!
Click to expand...
Click to collapse
I used TWRP and flashed over CM9 with no problems. Did it as an upgrade. Wipe system> install CM10> install gapps> Wipe cache
Several people have reported that TWRP worked for them.
Okay...So I'm having boot loop issues ever since I tried to flash Vincom's Superlite rom. Before attempting to switch to a different rom I had a a older version of CWM, not sure what it was....But I was under the impression I needed CWM touch to be able to use the Superlite rom. So I flashed sk8's CWM touch using a older CWM...With touch, I flashed the Dark Side Super Wipe 3x's and also did the wiped dalvek 3x's.....After all the wiping I flashed the superlite rom....my previous rom was CM10, by the way.....i got stuck in bootloop so I tried the darkside-wipe-cache, because that solved all my bootloop issues with the CM 9 and CM 10.......I tried to revert back to CM 10 via flash and got stuck in a boot loop....I tried multiple times to reflash and wipe with both superlite and CM 10...I couldnt get anything...So I gave up and flashed to stock firmware UCL6 via CWM Touch.....My phone is functional I just dont want this stock "rom"...I want to be able to use CM 10 again because the t-mobile radios dont work with the stock....Im thinking its the CWM....I tried using different kernels as well...and i still get a boot loop......
daygobaker said:
Okay...So I'm having boot loop issues ever since I tried to flash Vincom's Superlite rom. Before attempting to switch to a different rom I had a a older version of CWM, not sure what it was....But I was under the impression I needed CWM touch to be able to use the Superlite rom. So I flashed sk8's CWM touch using a older CWM...With touch, I flashed the Dark Side Super Wipe 3x's and also did the wiped dalvek 3x's.....After all the wiping I flashed the superlite rom....my previous rom was CM10, by the way.....i got stuck in bootloop so I tried the darkside-wipe-cache, because that solved all my bootloop issues with the CM 9 and CM 10.......I tried to revert back to CM 10 via flash and got stuck in a boot loop....I tried multiple times to reflash and wipe with both superlite and CM 10...I couldnt get anything...So I gave up and flashed to stock firmware UCL6 via CWM Touch.....My phone is functional I just dont want this stock "rom"...I want to be able to use CM 10 again because the t-mobile radios dont work with the stock....Im thinking its the CWM....I tried using different kernels as well...and i still get a boot loop......
Click to expand...
Click to collapse
Bump? Anybody?
Manually do the following wipes: wipe data/factory reset, cache, dalvik, format/data, format/system, format/cache all x3. Then reflash his ROM followed by gapps. Let it sit for 10 min as caches need time to settle and the initial boot always takes much longer.
Which version of cwm touch are you on?
------------------------------------------------
Sent from my Skyrocket i727 running AOKP JB
For a one stop shop are Vincom's threads
Everything Root: http://forum.xda-developers.com/showthread.php?t=1773659
Returning to Stock: http://forum.xda-developers.com/showthread.php?t=1652398[/QUOTE]
Success!!! Everything works...Thank you so much....just one more question....what is the proper way of reflashing a radio? Do I have to format system and reflash the rom everytime I want to try a different radio?
daygobaker said:
Success!!! Everything works...Thank you so much....just one more question....what is the proper way of reflashing a radio? Do I have to format system and reflash the rom everytime I want to try a different radio?
Click to expand...
Click to collapse
Clear cache clear dalvik cache flash radio if you has issues refresh Rom from scratch DO NOT REFLASH RADIO
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
daygobaker said:
Success!!! Everything works...Thank you so much....just one more question....what is the proper way of reflashing a radio? Do I have to format system and reflash the rom everytime I want to try a different radio?
Click to expand...
Click to collapse
Nope. Just wipe dalvik and cache and flash it. But it's likely to be an exercise in folly anyway, because it you have uclf5 and you flash uclf6, you still have the uclf5 libs. Changing the radio libs is a much more complicated procedure and without doing so you get limited benefit from flashing a new radio. But sometimes it does help anyway. Might be worth a try if you're getting poor connectivity.
daygobaker said:
Success!!! Everything works...Thank you so much....just one more question....what is the proper way of reflashing a radio? Do I have to format system and reflash the rom everytime I want to try a different radio?
Click to expand...
Click to collapse
No need to do a whole clean install simply to switch out the radio. I 95% positive you only need to wipe cache, dalvik, flash radio and reboot. I only changed radio once and it was during a clean install so I never really paid that close attention to the steps when you put it over the top of your ROM. Do what I said and you should be fine.
Or grab the torch and pitchfork. Jk there's nothing to worry about
------------------------------------------------
Sent from my Skyrocket i727 running AOKP JB
For a one stop shop are Vincom's threads
Everything Root: http://forum.xda-developers.com/showthread.php?t=1773659
Returning to Stock: http://forum.xda-developers.com/showthread.php?t=1652398
Still bootlooping...
Mike on XDA said:
Manually do the following wipes: wipe data/factory reset, cache, dalvik, format/data, format/system, format/cache all x3. Then reflash his ROM followed by gapps. Let it sit for 10 min as caches need time to settle and the initial boot always takes much longer.
Which version of cwm touch are you on?
Click to expand...
Click to collapse
Hey Mike,
I've been bootlooping as well. A little background...
I'm on CWM Touch 6.0.1.2 _sk8erwitskil_
I was on cm-10-20120812-EXPERIMENTAL-syyrocket-alpha3
Yesterday, I went to cm-10-20120912-UNOFFICIAL-skyrocket
I was ok until just a little bit ago I was on a call and the phone rebooted. Since then, bootloop-city.
I tried this procedure, reflashed 0912 and no joy. I think, at this point, the unreliability of CM10 (at this time) has worn thin (no dis to all the awesome developers out there) and I just want to go back to a stable CM9.
Any suggestions?
Thanks,
Bob
EDIT: Ya know, just when you think all is lost, there is Nandroid! I'm back to CM9 and no longer bootlooping!
Hello Pros! First post, semi-noob here.
I tried flashing the newest [JB][CM10Based]Unoffical MIUI 2.9.14 Skyrocket 9/14/12[PORT] today. I followed all instructions; I wiped wiped wiped, factory and Dalvik, and flashed the kernel.
But I am always stuck on the MIUI bootscreen, and can never fully load up the ROM. I've tried wiping and re-flashing several times, to no avail. I have not had any problems flashing roms before this. Any help or ideas of what causes this would be greatly appreciated.
Thanks so much!
shentheory said:
Hello Pros! First post, semi-noob here.
I tried flashing the newest [JB][CM10Based]Unoffical MIUI 2.9.14 Skyrocket 9/14/12[PORT] today. I followed all instructions; I wiped wiped wiped, factory and Dalvik, and flashed the kernel.
But I am always stuck on the MIUI bootscreen, and can never fully load up the ROM. I've tried wiping and re-flashing several times, to no avail. I have not had any problems flashing roms before this. Any help or ideas of what causes this would be greatly appreciated.
Thanks so much!
Click to expand...
Click to collapse
Couple things.... did u format data/system? Also what recovery are u using?
Deliberate said:
Couple things.... did u format data/system? Also what recovery are u using?
Click to expand...
Click to collapse
Yes, I formatted both system and data. And I'm using the recovery that was recommended in the rom thread, Sk8er's Cwm v13.
Thanks for your reply!
shentheory said:
Yes, I formatted both system and data. And I'm using the recovery that was recommended in the rom thread, Sk8er's Cwm v13.
Thanks for your reply!
Click to expand...
Click to collapse
Try reflashing. But when u get into recovery go to extras/darkside tool. And click on the super wipe(idr what's its called but there's only two options.) When that's done factory reset format data/system 3x if u want.( Couldn't hurt) then flash ROM! All should be good... if not keep this thread open. Lol and well try something else. But hopefully that works. Good luck!
Deliberate said:
Try reflashing. But when u get into recovery go to extras/darkside tool. And click on the super wipe(idr what's its called but there's only two options.) When that's done factory reset format data/system 3x if u want.( Couldn't hurt) then flash ROM! All should be good... if not keep this thread open. Lol and well try something else. But hopefully that works. Good luck!
Click to expand...
Click to collapse
Thanks for the steps, but unfortunately I'm still staring at this dang MIUI bootscreen...:crying:
I ran the darkside superwipe, factory reset 3x, and formatted both data/system 3x, flashed the rom, and I'm still staring at this dang MIUI bootscreen... waaa waaaaaaa, what's the DEALIO?
shentheory said:
Thanks for the steps, but unfortunately I'm still staring at this dang MIUI bootscreen...:crying:
I ran the darkside superwipe, factory reset 3x, and formatted both data/system 3x, flashed the rom, and I'm still staring at this dang MIUI bootscreen... waaa waaaaaaa, what's the DEALIO?
Click to expand...
Click to collapse
Really? Damn. Are u on the latest recovery? If not try flashing the newest. Then do the steps again in my last post. Can't believe your having all these troubles!
Oh also u could try fixing permissions. After doing all the wipes and after flashing. Go to dark side tools again and do the cashe wipe! Then go back to advanced and fix permissions again.
Can you boot into recovery or not? If you can, just flash the rom. If you can't, yank the battery, replace it. Then, hold down both volume buttons, the press the power button, release all the buttons, you should be able to get into recovery.
Deliberate said:
Really? Damn. Are u on the latest recovery? If not try flashing the newest. Then do the steps again in my last post. Can't believe your having all these troubles!
Oh also u could try fixing permissions. After doing all the wipes and after flashing. Go to dark side tools again and do the cashe wipe! Then go back to advanced and fix permissions again.
Click to expand...
Click to collapse
Wow, still stuck on the boot screen even after the darkside cache wipe. I flashed CWMR Touch v6.0.1.3 by sk8erwitskil which is the newest CWM recovery as far as I believe, and the recommended recovery for this ROM. I EVEN flashed TWRP 2.2 just for the heck of it and flashed MIUI with that and still the same result; stuck on bootscreen. So I'm pretty sure it's not the recovery.
I did a darkside superwipe, and a darkside cache wipe, along with factory reset & format data/system 3x. The rom installs in recovery just fine. It's just once i reboot, i get the MIUI splash loading screen indefinitely. I'm not sure what could be causing this since I do all the important wipes (plus the darkside wipes now) each time. I think I have BAD LUCK!
You'll have to use odin, and reroot your phone.
Have you checked the MD5 of the ROM? If it's a bad DL it could flash just enough of it to loop you.
shentheory said:
Wow, still stuck on the boot screen even after the darkside cache wipe. I flashed CWMR Touch v6.0.1.3 by sk8erwitskil which is the newest CWM recovery as far as I believe, and the recommended recovery for this ROM. I EVEN flashed TWRP 2.2 just for the heck of it and flashed MIUI with that and still the same result; stuck on bootscreen. So I'm pretty sure it's not the recovery.
I did a darkside superwipe, and a darkside cache wipe, along with factory reset & format data/system 3x. The rom installs in recovery just fine. It's just once i reboot, i get the MIUI splash loading screen indefinitely. I'm not sure what could be causing this since I do all the important wipes (plus the darkside wipes now) each time. I think I have BAD LUCK!
Click to expand...
Click to collapse
I had the same problem, but while my phone was stuck on the MIUI boot screen i pulled the batter, got into recovery again and simply did a factory data reset just once and then it booted up, but my issue is that i get no data at all no mater what version of MIUI I try to flash.
mimart7 said:
You'll have to use odin, and reroot your phone.
Click to expand...
Click to collapse
Even if my stock rom is already rooted? I'm not against trying it, I'm just curious to how that could affect it. Thanks for your help!
hechoen said:
Have you checked the MD5 of the ROM? If it's a bad DL it could flash just enough of it to loop you.
Click to expand...
Click to collapse
I will do this and update when I do, Thanks for your help!
hechoen said:
Have you checked the MD5 of the ROM? If it's a bad DL it could flash just enough of it to loop you.
Click to expand...
Click to collapse
Ya I agree try downloading it again. Check the md5 and flash that ROM again. If it doesn't work your gonna have to Odin!
There were a lot of complaints of boot loops when flashing, so I pulled the DL link. I actually stopped using miui and moved back to CM or AOKP, depending on which one is most stable at the moment. Every once in a while I give miui a try, but I never stick with it. If you want miui, I suggest you follow Lithium's thread. His version is the officially supported miui rom.
I can confirm heres what i did to fix i had the boot loop.. all i did was run DARKSIDE Superwipe x2 Times. Then i installed MIUI Rom. Then i Factory Reset. Try booting wait a little bit. If still not going threw remove battery and boot to recovery and factory reset one more time then reboot. So once again.
1. DARKSIDE SUPERWIPE x2++ 2. Install MIUI Rom. 3. Factory Reset. 4. Boot. 5. (If still looping) Remove battery Then recovery. and Factory Reset and boot again. Your welcome
Can we move this to q and a?
Sent from my XT894 using Tapatalk 2