Database Info

Vehicle Dock Mount

HI all,
Just upgraded from a GSIII to GS4. Now I need a better fitting windshield mounting dock. For the GSIII, it was general knowledge that the AT&T Samsung INFUSE 4G dock fit the GSIII and it did for the most part. I really like the slide up into the phone style USB port, so I have no cables to fuss with. I know there's Qi charging but I am not going there just yet..
The S4 barely fits into the INFUSE dock but it takes being very gentle and very slightly bending the dock for the phone to snap in.
I am open to other ideas... suggestions?

muzicman82 said:
HI all,
Just upgraded from a GSIII to GS4. Now I need a better fitting windshield mounting dock. For the GSIII, it was general knowledge that the AT&T Samsung INFUSE 4G dock fit the GSIII and it did for the most part. I really like the slide up into the phone style USB port, so I have no cables to fuss with. I know there's Qi charging but I am not going there just yet..
The S4 barely fits into the INFUSE dock but it takes being very gentle and very slightly bending the dock for the phone to snap in.
I am open to other ideas... suggestions?
Click to expand...
Click to collapse
I am very happy with my iBolt dock. I purchased mine off eBay and the dash mount disk kept falling off. Oddly the sticky pad stuck to the dash but the disk itself would come off. I called iBold and they shipped me a new one without hesitation.
iBOLT xProDock Active Car Dock/Holder/Mount for Samsung Galaxy S 3, S4 & Note 2 with aux-out to car-speakers. Works with ALL cases.
http://www.iboltshop.com/xProDock-Samsung-charging-cables-delayed/dp/B00AOCSFYC
Sent from my SGH-M919 using Tapatalk 2

TKBoMo said:
I am very happy with my iBolt dock. I purchased mine off eBay and the dash mount disk kept falling off. Oddly the sticky pad stuck to the dash but the disk itself would come off. I called iBold and they shipped me a new one without hesitation.
iBOLT xProDock Active Car Dock/Holder/Mount for Samsung Galaxy S 3, S4 & Note 2 with aux-out to car-speakers. Works with ALL cases.
http://www.iboltshop.com/xProDock-Samsung-charging-cables-delayed/dp/B00AOCSFYC
Sent from my SGH-M919 using Tapatalk 2
Click to expand...
Click to collapse
Looks really nice but 1) as mentioned I'm looking for something with a USB port that slides into place... which is much easier than a cable attachment. 2) I'm more of a portrait kind of layout person.

muzicman82 said:
Looks really nice but 1) as mentioned I'm looking for something with a USB port that slides into place... which is much easier than a cable attachment. 2) I'm more of a portrait kind of layout person.
Click to expand...
Click to collapse
As for your first request, I agree and wanted the same but could not find one. I have however come to appreciate the design, as that cable is stiff and holds itself in place so it's easy to pop in place, or not if its a short drive. Additionally, I've found the micro usb port on this phone is very tight and I have difficulty getting it to slip into my home dock, it has to line up exact. Lastly, with the aforementioned design of the port, it would impossible to accommodate the plethora of case size variations.
As for portrait view, that is totally doable, it rotates. Anoter neat feature is that the camera is not covered so if you desire, you can snap pics or video of that &%@$ driver in front of you.
No, I don't work for, nor am compensated by iBolt, though I should be. Just a happy customer. :beer:
Sent from my SGH-M919 using Tapatalk 2

I have had iBolt xProDoc for a while and I couldn't be happier. I hope it helps
¡¡So say we all!! from Battlestar GT-I9500

The Craigsdock dock is the best I've tried. It is slim looking and has built-in charging and you can dock/undock with one hand. And it has a charger, did I mention that? Not one where you have to manually insert the charging cable like the iBolt makes you do. This is more like a very-slim-looking Infuse dock but without the audio and bulk.
You can swap out the existing cable for a USB-audio cable or anything else.
Costs a bit, but it'll last a lifetime and works with all large Samsung phones from S3 to S4 to Note II. So you don't have to upgrade your dock every time you upgrade your phone. And it also works with all the bulky cases too.
I've tried all the docks from Infuse to iBolt to generic and it's the best I've used yet.
http://www.craigsdocks.com/samsung-galaxy-s3-s4-note-ii-car-dock/

It sounds like a ProClip might suit you well. I have been using these holders with various devices for about 10 years. I don't have my GS4 yet, so I can't comment on these ones specifically. However, I can tell you to expect a high-quality product that fits the device perfectly. Check them out:
http://www.proclipusa.com/phone-holders/device/samsung/galaxy-s4.cmsv

This one's doing the trick for me, it's closest to the GS3 iBolt dock.
http://www.amazon.com/Samsung-Galax...id=1374805594&sr=8-15&keywords=galaxy+s4+dock
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Hi all,
I've ordered the iBOLT xProDock. I'm sure it is fantastic and will certainly do the job. That said, it is quite expensive. This should hold me over until and if Samsung or anyone else makes a dock similar to the lovely Infuse dock with the "slide into place" USB charger.
This should also come in handy for those many times such as this that I get a new phone and am stuck without a suitable dock.

Another vote for the iBolt. Ordered it for my S3, been used for One +, One and S4. Great little system! And their support is great!

Surfing the Web a couple of days ago I come across this http://www.kickstarter.com/project...ergy-worlds-best-wireless-smartphone-charger
It seems interesting
¡¡So say we all!! from Battlestar GT-I9500

This one is kinda expensive but works well at looks slick 35 bucks
Montar mount
winnergear.com/product/car-mount/
---------- Post added at 03:15 AM ---------- Previous post was at 03:05 AM ----------
Omg this is exactly what ive been imagining. I was planning on ordering nfc tags to put in my car but I really like how this is put together. Thanks for sharing

Imagnet
I've been using the imagnet with the Spigen slim armor case and it's perfect. Just throw it up there and it stays perfectly. $25 on amazon.

3rd party Qi wireless charger base

Since we don't have a dedicated thread on 3rd party wireless charger, here is one that I have started, you can post anything here on 3rd party chargers whether it's a desktop or portable, for receivers you can post them here http://forum.xda-developers.com/showthread.php?t=2718027
Here are two new transmitter, no price yet.
brand name is Yijieneng
model number C7
available sometime new week
Dual standing desktop charger.
Update: Apparently there are two version of this charger available
Version 1
C7
Dual Charger Pad
3 coils + 1 coil
USB 2.1A output
5V input allows one device charging only
12V input allows both device charging
Version 2
C7C
Dual Charger Pad
2 coil + 1 coil
Charger can only charge one device at one time
5V input only
USB charging
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
brand name is yijieneng
model number Q23
available now
3 coils desktop transmitter.
I have the 3 coil one coming anyday, will post a quick review ASAP.

that looks legit!
I will def get one of these if the rating is good. let us know!
thnx!

sum1one said:
that looks legit!
I will def get one of these if the rating is good. let us know!
thnx!
Click to expand...
Click to collapse
They are real, I have the 3 coil one coming any day, the standing one should be available about a weeks time, but not sure how long it will available on ebay, amazon or other online sites.

i will keep an eye out. that is how i stand my phone at work. i currently have the Qi wireless charger (lays out flat)
works good but i would like it standing up

sum1one said:
i will keep an eye out. that is how i stand my phone at work. i currently have the Qi wireless charger (lays out flat)
works good but i would like it standing up
Click to expand...
Click to collapse
I will update when ever there are new stuff.

Looks pretty nice!
I've been using the Koolpad (have one at home and at work):
http://www.amazon.com/Koolpad-Wirel...e=UTF8&qid=1403711700&sr=8-1&keywords=koolpad
Works pretty well. I disabled the sound- found an old thread on here that showed how to do it. Pretty simple to do.

As far as the dual standing desktop charger goes, do we know if this will work with the factory receiver backing plate? The Tylt View does not because the receiver on the phone is in the wrong place for it.

anaxagorasbc said:
As far as the dual standing desktop charger goes, do we know if this will work with the factory receiver backing plate? The Tylt View does not because the receiver on the phone is in the wrong place for it.
Click to expand...
Click to collapse
This is the same with my sanwa/maxell standing charger base, although it does have 7 coils, the samsung wireless back does not work the normal way, you have to place the phone upside down or horizontally.

updated first post.

My Tylt VU works fine with my S5

slowrey said:
My Tylt VU works fine with my S5
Click to expand...
Click to collapse
it depends on which receiver you are using.

I am using the Samsung OEM charging back and the Tylt Vu horizontal and vertically. No issues here. I have two of them.

slowrey said:
I am using the Samsung OEM charging back and the Tylt Vu horizontal and vertically. No issues here. I have two of them.
Click to expand...
Click to collapse
I can'treally comment on this as I don'thave the tylt charger.
thanks for the info.

I have the expower charger and matching ultra thin card
Very unobtrusive doesn't get to hot while charging and has quite a decent pickup area when used with the ultra slim card cost for the charger and card around £34 from amazon whole pad is about 12 mm thick and around 65 mm in diameter. Charges my s5 through an otterbox defender no problem.

nexy33 said:
I have the expower charger and matching ultra thin card
Very unobtrusive doesn't get to hot while charging and has quite a decent pickup area when used with the ultra slim card cost for the charger and card around £34 from amazon whole pad is about 12 mm thick and around 65 mm in diameter. Charges my s5 through an otterbox defender no problem.
Click to expand...
Click to collapse
I agree, the powerqi T200 is a decent charger, the coils and PCB is good quality and does have a good detection with most phones, but I prefer the metrans MWT 03S, much smaller and very good detection, but only available in black with aluminum frame, I would like to see a whte version.
MWT 03 all plastic
MWT 03S with aluminum frame.
I highly recommend these, although they are single coil, they detect the phone pretty well and charge pretty cool, with good style, the LED is not so bright and they are made in korean.
Now i'm using the Araree/powerholic different names in different market, the uneven surface allows the phone to charge cooler.
The edge of the center part has a rubber ring to prevent the phone from slipping or moving around.
Iffu

I got a wireless charger and receiver on ebay it is round and slanted so I use it almost like a dock
the issue is the phone keeps turning on and gives me the BAttery fully charged notification.. is there a way to stop that notification?
also the wireless charging notification comes on as a box and while that is on I can not do anything on the phone and have to wait 5seconds for it to go away .. it would be nice if the wireless charging notification could be much less intrusive..
P.s. my charger charges the phone at 620ma which is better than my 10ft long usb charger at 300ma and worst than my wall charger at 1200ma.

Has anyone managed to try a few of these out? Any comments on which works the best?

Personally after having 4 different 3rd party chargers I've stuck to the Samsung ones. They just seem less fussy about placement. They also don't have annoyingly bright LEDs. Over here they are £25 on Amazon. Worth paying the extra £10 or so over the cheaper ones.

Do any of these 3rd party chargers work with the Samsung s view wireless case?

Portable Wireless Charger Power Bank 4000 mAh
I was wondering if anyone has tried the Qi-infinity™ Portable Wireless Charger Power Bank 4000 mAh on Amazon. Unfortunately, I cannot link it because I haven't posted a lot on XDA.
It has great reviews from verified purchasers but I'm still skeptic. I'll place an order for it tomorrow morning if no one has tried it and update when I've used it.

[Q] Which cases fit the magnetic dock?

I'm currently using a magnetic charging cable and it's great not having to ever open the usb flaps and use the usb socket each time I charge, but it's a drag having to keep my case open while it charges; plus, it can take up to a minute to attach the damn thing. I got a cheap case off eBay which is starting to break so I'm after a new one but it seems impossible to know which cases will fit in the dock.
If you have a dock and a case/cover, and assuming you recommended the case/cover, could you reply here stating the brand/model? Thanks!

Cruzerlite Bugdroid does not fit
I have the Cruzerlite Bugdroid TPU shell and can confirm this does not fit the stand with the standard adapters. I don't like the Book style cases and am not impressed by the Sony versions anyway. The gap in the dock is very thin so I'd be amazed if there are any cases that will fit with the standard adapters and protect the phone from drops. I should have checked this before buying the dock. I'm now looking to modify like another user on here with sticky backed foam.
poldie said:
I'm currently using a magnetic charging cable and it's great not having to ever open the usb flaps and use the usb socket each time I charge, but it's a drag having to keep my case open while it charges; plus, it can take up to a minute to attach the damn thing. I got a cheap case off eBay which is starting to break so I'm after a new one but it seems impossible to know which cases will fit in the dock.
If you have a dock and a case/cover, and assuming you recommended the case/cover, could you reply here stating the brand/model? Thanks!
Click to expand...
Click to collapse

I scooped this one off eBay:
http://www.ebay.ca/itm/291245971777
Fits well and I like the way they did the cutouts because it seems to keep the power or camera buttons from getting pressed by mistake when the phone is in my pocket. The insert I used for the dock is stamped 34B and I think it's the insert for the Xperia Z3 Compact but it fits perfectly.

I have a Tudia case off Amazon, and the DK48 inserts are too thin . Looking to go the foam insert route, or dremel one of the inserts to open it up a tad. Thought about returning it and buying the Z2 dock (DK36). But it is more expensive (on Amazon at least), and I am not guaranteed it will work either.

poldie said:
I'm currently using a magnetic charging cable and it's great not having to ever open the usb flaps and use the usb socket each time I charge, but it's a drag having to keep my case open while it charges; plus, it can take up to a minute to attach the damn thing. I got a cheap case off eBay which is starting to break so I'm after a new one but it seems impossible to know which cases will fit in the dock.
If you have a dock and a case/cover, and assuming you recommended the case/cover, could you reply here stating the brand/model? Thanks!
Click to expand...
Click to collapse
I am using Chabel case from Korea and Case-Mate Sony Xperia Z3 Tough Case.
Both can dock charge

I use the Krusell FrostCover for Xperia Z3/Z3 Dual - works good for me and charging it on the dock is straightforward.

sirbrian said:
I am using Chabel case from Korea and Case-Mate Sony Xperia Z3 Tough Case.
Both can dock charge
Click to expand...
Click to collapse
which Chabel case have you got mate?

CaseMate Toughcase w/metal buttons. Snug, handsome case, 2 part protection and fits the DK48. Not to shabby.
Sent from my D6603

Ringke fusion does.

This Motomo case works perfectly with the Sony Z3 dock : http://www.amazon.com/s/ref=nb_sb_noss_1?url=search-alias=aps&field-keywords=motomo+z3+case
The only thing is that you need to take out that plastic adapter since the case is too bulky. If you run it naked like in this picture with the plastic adapter off it works nicely and the phone doesn't feel loose at all while charging:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

poldie said:
I'm currently using a magnetic charging cable and it's great not having to ever open the usb flaps and use the usb socket each time I charge, but it's a drag having to keep my case open while it charges; plus, it can take up to a minute to attach the damn thing. I got a cheap case off eBay which is starting to break so I'm after a new one but it seems impossible to know which cases will fit in the dock.
If you have a dock and a case/cover, and assuming you recommended the case/cover, could you reply here stating the brand/model? Thanks!
Click to expand...
Click to collapse
I use a Tudia case on mine:
http://www.amazon.co.uk/TUDIA-Bumper-Protective-Compatible-Verizon/dp/B00OPW1SD2
It has a dock port cutout,
However i bought a replica of the sony charger, not the real deal and they gave me 3 adapters all the same size, So i had to do alittle DIY and sanded one of the adapters to fit my case, It works perfectly and with the Tudia case it's so much easier to slot the dock in

With using the Cruzerlite TPU cases, which charging dock will it fit it? I have the dock for the Z1 that I was using for the Z1s and the Z3 fit without the case (with putting a piece of folded up paper behind it to hold it in place) but now after putting the case on it won't fit. Which charging dock will hold the Z3 with the Cruzerlite TPU case on it?

The Casemate Barely There case fits the DK48 dock perfectly with one of the inserts. No mods required.

jonamafun said:
The Casemate Barely There case fits the DK48 dock perfectly with one of the inserts. No mods required.
Click to expand...
Click to collapse
Yeah, I had been using the DK31 which fit it fine before the case... would the DK48 hold the Cruzerlite TPU case as well? I'm sticking to that case and am trying to confirm which dock will hold it.

lin013190 said:
Ringke fusion does.
Click to expand...
Click to collapse
It barely fits, and the phone sits at 90 degrees, not leaning back like it should do.
My dock is the DK48, btw.
Sent from my D6603 using XDA Free mobile app

Devilcase aluminum bumper works. Comes with it's own insert.

This one will fit the dock
http://shop.brando.com/simplism-ultra-thin-cover-set-for-sony-xperia-z3_p11839c304d4.html

LG V10 Leather back with wireless charging review

I ordered this from Ebay 10 days ago and got it in the mail today from China.
First things first, this is real leather! The smell and feel is genuine leather, although very thin. The grip feels similar to my T-mobile brown leather back I had previously on my G4. It's actually pretty soft and supple. The leather does not surround the whole back, but just the rear side of the back. The sides of the back are smooth black plastic.
The fit is a little more snug than the factory LG back. The back clipped nice and tight, but mine had a little gap by the headphone jack. I did not see any other gaps elsewhere. This may just be a mold issue and YMMV. The back is slightly thicker than the factory one. It's only noticeable when pressing the volume down button, where you can feel the back is slightly thicker. I only have one case (spigen ultra thin) and it fits perfectly, and wireless charging works over the case as well.
Wireless charging works perfect, but the sweet spot is quite small. I feel that is more to do with the charger i'm using, than the coil in the back. Either way, I have no problem placing the phone on the charger first try. Using ampere with the screen on, I see on average 700mA. Side note, when my phone was placed on my wireless charger (Nokia DT900) I can hear an ever so slight whine noise. I heard it too previously on my S6 Edge Plus using the same charger, but it is a tad louder on this wireless charging back. Not sure if its the charger, or the coils.
My final thoughts are that it is well worth the $15 shipped. The leather feel is fantastic, and wireless charging is a big bonus! The ebay user I used (which I have zero connections with) is : connectionstation
Some pics!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

First, thanks so much for posting this. I'm sure a bunch of us who want wireless charging will look into this for a more premium feel. The normal back of this V10 makes me think how Samsung missed out on such a market with The grip-feel of The back of this V10. Plastic or rubber like and phone is huge but because off The textured back I haven't dropped it once ( ok well I did drop it once but no damage)
Questions for you before I buy:
Grip: which back is easier to grip? Is this a super smooth leather or do the oils from your finger/leather help grip it?
Sounds like you would obviously recommend: does the color match the phone? It looks great in pictures.
Does it raise the camera any more off the table than the normal back? I scratched black ring around camera while putting on screen protector while it was on the table. I can't tell by pictures.
Thanks

Received my "buttery" cover today too. "Chargerg" works good with my TYLT charger. Sweet spot is more forgiving than my note 5 on that thing.
I agree with everything else.
Grip is still pretty good. Less free feeling on a glass table. Grips a smooth surface.
---------- Post added at 05:37 AM ---------- Previous post was at 05:35 AM ----------
A little darker black and about the same mold to camera as the factory one. A little raise but not above the lens.

My pix:

Link to the ebay site?

http://m.ebay.com/itm/281853142038?_trksid=p2056016.l4276&_mwBanner=1
That's where I just ordered mine.
Sent from my LG-H901 using Tapatalk

jagman96 said:
http://m.ebay.com/itm/281853142038?_trksid=p2056016.l4276&_mwBanner=1
That's where I just ordered mine.
Sent from my LG-H901 using Tapatalk
Click to expand...
Click to collapse
I ordered the same listing, but brown
@skyline23 @secretLOVER which ones did you guys buy, mind sharing links?
I really dig that it looks very similar to the G4 backs.

If you search for user : connectionstation you should find it.

Does it charge to full capacity?
Is it quick charge?
Is there an overheating issue?

skyline23 said:
Click to expand...
Click to collapse
Thanks for your information, the wireless backs actually look better than I expected, the seller should use your pics, he would sell more of them I ordered one from another listing because it was so inexpensive although in most cases I'm going to prefer fast charging to wireless charging.

Just ordered the red one. Thanks for your review.

Abominabel said:
Just ordered the red one. Thanks for your review.
Click to expand...
Click to collapse
Please post pics when you receive it.
Sent from my LG-H901 using Tapatalk

Abominabel said:
Just ordered the red one. Thanks for your review.
Click to expand...
Click to collapse
Yeh, the red looks good and matches the gold well, too bad the front of the phone is not red, and the back buttons, then it will be perfect.

mrwinkle said:
Please post pics when you receive it.
Sent from my LG-H901 using Tapatalk
Click to expand...
Click to collapse
Will do.

Just ordered this and 2 wiressless charging stations
Are they universal cause I hope the back and the 2 stations are compatible

Does NFC still work?

EpiphanyofMusic said:
Just ordered this and 2 wiressless charging stations
Are they universal cause I hope the back and the 2 stations are compatible
Click to expand...
Click to collapse
If the the stations you bought are qi they should be compatible with a qi back. Someone mentioned fast chargers for samsung note not working.

Here is mine in Brown, didn't find this thread, was buried deep..
http://forum.xda-developers.com/showpost.php?p=64040257&postcount=82

stevenlong said:
Does NFC still work?
Click to expand...
Click to collapse
I would also like to know. Also, how sturdy are the clips on it? I might change my Battery out a couple times a month and don't want to have my back snap off.
Sent from my LG-H901 using Tapatalk

contradude said:
I would also like to know. Also, how sturdy are the clips on it? I might change my Battery out a couple times a month and don't want to have my back snap off.
Sent from my LG-H901 using Tapatalk
Click to expand...
Click to collapse
It's as good as my original IMHO, tad snugger. So you press slightly harder to snap in place and have to run your nail through detaching most to get it off.

Type-c charging dock station is available

Cool type-c charging dock is available for all type-c charging interface. I think it is so cool.
Charging as well as function as a stand dock for watching at good angle.

where?

Sarvi Dock in Stock! Ordered mine today in black for my Graphite 6P.
http://www.sarvidesigns.com/#!purchase-sarvi-dock/c1iuj

In witrig.com or ebay.
ncsuwolfs said:
where?
Click to expand...
Click to collapse

tgearman said:
Sarvi Dock in Stock! Ordered mine today in black for my Graphite 6P.
http://www.sarvidesigns.com/#!purchase-sarvi-dock/c1iuj
Click to expand...
Click to collapse
I ordered one too; I hope it lives up to the hype I've read about it

PeterAron said:
In witrig.com or ebay.
Click to expand...
Click to collapse
Can you do better than that? Without at least a product name, no one can possibly find the product you're talking about... How about a direct link? (witrig.com ain't a thing.)

EDIT: Nevermind

I am so sorry. I have no right to post a link before, so i just give a blurred address. http://www.witrigs.com/type-c-charging-dock-station-black Here is the Type-C charging dock. Hope it does help.
GuinnessX said:
Can you do better than that? Without at least a product name, no one can possibly find the product you're talking about... How about a direct link? (witrig.com ain't a thing.)
Click to expand...
Click to collapse

tgearman said:
Sarvi Dock in Stock! Ordered mine today in black for my Graphite 6P.
http://www.sarvidesigns.com/#!purchase-sarvi-dock/c1iuj
Click to expand...
Click to collapse
What and another payment option? do you accept dabit card ?

tgearman said:
Sarvi Dock in Stock! Ordered mine today in black for my Graphite 6P.
http://www.sarvidesigns.com/#!purchase-sarvi-dock/c1iuj
Click to expand...
Click to collapse
I don't think Sarvi dock supports USB C.

napes22 said:
I don't think Sarvi dock supports USB C.
Click to expand...
Click to collapse
It sure does - you use your existing USB C cable. There's an adapter you run your cable through, then tighten the set screws to hold it in place. It's a pretty ingenious design, which explains why their kickstarter got funded so quickly.
If you view their videos, you'll see what I'm referencing.

napes22 said:
I don't think Sarvi dock supports USB C.
Click to expand...
Click to collapse
It just holds the cable and works with any type according to their website. Another member posted in a separate OP saying it worked with the google type c cable. I have one enroute so I'll let you know

Can confirm that the Sarvi dock works perfectly fine with the stock Google USB-C cable (I have one currently sitting on my desk - pic of it in another thread)
LuckyDragan said:
I'm using the Sarvi Dock paired with the official 3 ft-long USB A-C cable from the Google Store. Pretty happy with it so far because its adapter system lets me use any cable of varying connector size and its 100% case-compatible just by adjusting how much the USB connector sticks out from the docking base, and the angle at which the phone rests. There's a thin rubber strip that keeps the phone from wobbling side to side, and sticky feet on the bottom so it stays firmly on my desk. It's really solidly-built, with zero flex.
I put an NFC sticker on it so I could enable dock mode with just a tap, at the expense of preserving the minimalist design.
Backed it long before I knew the 6P existed, else I'd have gotten the matching aluminium one, but the white looks equally nice on my desk, as well.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse

Just picked up 2 in Grey, thanks a lot my man. May not use it a ton at work as I can't seem to kill the battery, but I miss having a nice stand here.

Thanks for this, ordering one as well! I miss a dock for my office desk.

Any concern that it appears the only thing supporting the phone is the USB-C connector? Any accidental movement causing the phone to shift side to side could damage the plug, right?

I received my Sarvi Dock a couple of days ago and love it - so much I'm ordering another for the office. Looks great, works great.

TCstr8 said:
Any concern that it appears the only thing supporting the phone is the USB-C connector? Any accidental movement causing the phone to shift side to side could damage the plug, right?
Click to expand...
Click to collapse
The phone rests against a back support that has a silicone pad, which stabilizes and holds the phone in position. You can set the depth of the USB C male connector so the phone rests on the base.
Barring a significant lateral blow to the phone in stand, I have zero concern about the design and potential damage to the connector. Just my 2¢.

Regarding these docks, do you need to hold the dock down with one hand while pulling the phone up with the other in order to unplug the phone? All my USB C connections seem quite stiff
Sent from my Nexus 6P using Tapatalk

rice923 said:
Regarding these docks, do you need to hold the dock down with one hand while pulling the phone up with the other in order to unplug the phone? All my USB C connections seem quite stiff
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
I bought the Sarvi dock, and it depends on the cable you use. I used my 6ft Google cable and I can remove my phone 1 handed without the dock moving. The Sarvi dock isn't exactly what I expected and despite looking nice the cable set up is more of a makeshift solution IMO. The dock works, but there are some questionable design choices for it that certainly could have been implemented better.