Car Mount/Dock With Cruzerlite Case - HTC One S

Anyone have any experience with a car mount/dock that will securely hold the One S while in a Cruzerlite case? I've tried a couple of cases off Amazon and they just aren't holding it tight which results in a lot of movement and bounce. Thanks!

DigitalMonk said:
Anyone have any experience with a car mount/dock that will securely hold the One S while in a Cruzerlite case? I've tried a couple of cases off Amazon and they just aren't holding it tight which results in a lot of movement and bounce. Thanks!
Click to expand...
Click to collapse
I'm using this one :
http://www.arkon.com/slimgrip/slimgrip-mini-windshield-car-mount.html
and it work well.

Thanks for the information. My wife has this mount so I tried it for a bit...
http://www.amazon.com/Arkon-SM410-U...id=1339681263&sr=8-1&keywords=arkon+car+mount
It's another Arkon but looks to be a different model then yours (it's an SM410). That link you posted mentions the SM514 in one place and SM515 in another. Can you verify which one yours is?
Anyway, the SM410 has padding on the arms that I thought would be nice but it prevents the phone from being secured tightly. It looks like the SM515 has padding on the top and bottom arms but that shouldn't be as much of an issue I wouldn't think.
So you have a Cruzerlite case as well? The SM515 doesn't look to have side arms so how does it hold it when horizontol for GPS use? Does it hold it pretty securely?

The spring is strong enought to hold it.
I always use it in landscape and it was fine with my desire s who is heavier than the one s. I use it with a one s since 2 months now and no problem so far.
I like it because you have an easy acces to the usb port and the volume control on the phone.
And I do have a ruber case like the cruzerlite a nomame found on amazon uk.

Excellent. Thanks for the information. I found it on Amazon for $16.95 and Prime shipping. I think I'll order it and give it a try.

I have try severall one and it is the only one that gave me satifaction.
And it is useable with other phone too. With or without case.
And it comes with 2 set of arm, long one for big phone like the one s and some smaller one if you want to hold somethig smaller

alternatively, but more expensive: iGrip HRX Kit Universal Mount & Holder

Here is the one I have been using for the past 6 months http://http://www.shopandroid.com/ibolt-prodock-alumina/3AA9715.htm used it with both my MyTouch Slide and now with my One S, also works with the wifes Galaxy Nexus. A touch on the pricey side but IMO well worth it since it can work with almost any device.

I ended up getting the dock archie53 suggested, the iBOLT ProDock Alumina Universal Hands-free Phone Holder/Dock. Found it for $32+free shipping on Amazon...
http://www.amazon.com/gp/product/B007DP0OQ0/ref=oh_details_o00_s00_i00
It does seem to hold my One S in a Cruzerlite case more securely. I noticed the padding on the arms is soft plastic rather then foam so I'm guessing it's because the plastic holds the phone tighter then the docks with foam on the arms was holding it.
Very impressed with it so far.

I can't post outside links yet, but look up "Comfort Wheels Brand Windshield Dashboard" on Amazon. They fit the One S just fine, and I use both the Cruzerlite and sometimes the D30 case.
It's really compact, too, so it's easy to fold away and toss in the glove compartment if you want it tucked away.
It's also really cheap! Orders fulfilled by Amazon.

For now I settle with the Osomount u-grip. Max. size phone is 5"
Verstuurd van mijn HTC One S met Tapatalk

Cases are for sissies. Just go naked and expose the beauty of this phone
Sent from my HTC VLE_U using Tapatalk 2

Related

silicone case

any one using one if so what make and where from the cheapo one i got off flea bay isn't that good
Picked this up from ebay its a tight fit feels comfortable in the hard seems nice and solid on the edges doesn't bulk the phone up and choice of colours nice cheap case till something better comes along quick delivery to
My item number was 190459832958
Sent from my Desire HD using XDA App
whats it like for access to the power button, the one i got was a real pain to use the power button
Same here with the power button...
combat goofwing said:
whats it like for access to the power button, the one i got was a real pain to use the power button
Click to expand...
Click to collapse
Sent from my Desire HD using XDA App
I got mine from ebay too
I got ebay #220687867777
As above, it is a tight fit but the power button is the problem, likely all the same case from different sellers..
I superglued a tiny plastic fragment from a shampoo bottle lid under the cases button indentation and it's perfect. The smoke effect isn't so good where I put the glue but duh... its a solvent.
It came with a screen protector which was surprisingly good compared to the Zagg ones I have used before (and still have).
Total bargain
well after initial getting one off flea bay it came and did the job but was bulky and the power button was hard to operate
then read on here about some one who got a very good one and no power button issues, so i got the link and ordered one and i have to say its excellent
fits a lot better than the other one and far less bulky and the power button is no longer a problem
http://cgi.ebay.co.uk/ws/eBayISAPI....666119&ssPageName=STRK:MEWNX:IT#ht_1673wt_905
combat goofwing said:
well after initial getting one off flea bay it came and did the job but was bulky and the power button was hard to operate
then read on here about some one who got a very good one and no power button issues, so i got the link and ordered one and i have to say its excellent
fits a lot better than the other one and far less bulky and the power button is no longer a problem
http://cgi.ebay.co.uk/ws/eBayISAPI....666119&ssPageName=STRK:MEWNX:IT#ht_1673wt_905
Click to expand...
Click to collapse
After seeing this I ordered one of these, and I can confirm it works well - much better than the previous case I had, where it was a real pain to press the power button. Really fast (free) delivery and only £3.49 - bargain!
Got a case-mate one today from carphone whore house it was a tenner with screen protector that I immediately threw away, as I don't see the need for a screen protector also it looked like it wouldn't fit that well. The case itself is pretty nice, I don't think it is silicone (maybe TPU) as it comes out of my pocket easily (you all know what I mean). It is very sleek and fits really well, power and volume buttons are easy to use so a win all round. Unfortunately it is not on either the CPW or the case-mate website yet (they had one type of case in stock and only one of that case in stock). Looking at the other case-mate cases I believe it is from their barely-there series.
combat goofwing said:
well after initial getting one off flea bay it came and did the job but was bulky and the power button was hard to operate
then read on here about some one who got a very good one and no power button issues, so i got the link and ordered one and i have to say its excellent
fits a lot better than the other one and far less bulky and the power button is no longer a problem
http://cgi.ebay.co.uk/ws/eBayISAPI....666119&ssPageName=STRK:MEWNX:IT#ht_1673wt_905
Click to expand...
Click to collapse
That looks great. My wife is about to get a Desire HD, I'm used to flexishield cases (which I think is brilliant for my HD2) - is this as good as theirs?
Thanks.
The case you are discussing in here is the same one I posted about in this thread. The seller I got it from sells it for a little less (£2.75) but it is exactly the same one. I have to say I have no problems with it, it fits well, all the buttons and openings are well cut and I would recommend it to anyone. As for the power button, the inital HTC design is a pain but this case helps out to some degree, that said, it is still difficult to press at times.
Regards.
Is it worth buying a hydro case or a silicone gel case like these
http://www.londonmagicstore.co.uk/G...ro+Gel+Case+for+HTC+Desire+HD+%252B+Film.html
http://www.g5-online.com/mobile_pho...ne_skin_case_and_screen_protector_P12042.html
I bought 2 of these the other day I gave one my friend who has the HD as mine doesn't come till Monday. The case looks fine and does the job. There is a really smart looking case on Play.com coming out at the end if the month. These will do until then.
Sent from my Hero Froyo'd Villian 1.5
combat goofwing said:
well after initial getting one off flea bay it came and did the job but was bulky and the power button was hard to operate
then read on here about some one who got a very good one and no power button issues, so i got the link and ordered one and i have to say its excellent
fits a lot better than the other one and far less bulky and the power button is no longer a problem
Click to expand...
Click to collapse
Thats the same one i got a few days ago, feels really good, buttons work fine, really happy with it
http://www.netimes.com/shop/index.p..._description=1&keyword=desire+hd+case&x=0&y=0
There are a couple of types available for Desire HD, and we have had no complaints so far.

[Q] holster suggestions?

Hi all -
when I bought my Fascinate, I got the VZW holster/case combo. Unfortunately, I've gone through 3 of them because the belt clip breaks. The last time I went into the VZW store, they said they wouldn't do another replacement, so I'm looking for a good replacement. Suggestions?
Never buy anything from verizon but phones...there are a lot of solid holsters from official Samsung accessories, so look for the model you like, and go search for the same but cheaper one on Amazon or eBay.
minho422 said:
Never buy anything from verizon but phones
Click to expand...
Click to collapse
NOW he tells me!
...there are a lot of solid holsters from official Samsung accessories, so look for the model you like, and go search for the same but cheaper one on Amazon or eBay.
Click to expand...
Click to collapse
no luck on Samsung's site....what's the general consensus about Seidio or OtterBox? Are they THAT much more robust than the competitor products? Specifically, how solid are the belt clips? I don't mind spending $50 once, but having the thing break after 2-3 months is a no-go!
http://www.seidioonline.com/product-p/hlssfasas.htm
Thanks Nunyazz....any comment on the questions I posed?
I've had that holster since they began offering it. It fits very snug and is very slim fitting. Fits very close to your side and rotates if needed. I love it. I had the "naked" holsters from them for the past 4 or 5 phones that I've owned.
Picked up a Seidio from Best Buy on Friday...we'll see how it holds up!
Thanks for the feedback guys
Does anyone know if theres an outward facing holster?
I just posted on this in the bike mount mod thread in the same forums:
I use the Otter Box defender case/clip combo. The clip can be used either way, with the screen facing in (very protected) or with it facing out(to use like a dock). On top of that the clip piece locks into full open position, allowing you to use it as a stand. Handy if you want to sit on the desk and have it maintain orientation, and also when using an alarm clock.
The case itself is also pretty resilient. I work for GeekSquad, and after hours one night I literally threw my phone across the 20,000sqft store to see how the case would hold up. No damages at all. Brilliant.
Another cool feature is the non slip silicone outer layer. When I am rolling around in my Jeep, I can plug the phone into my audio aux in, and throw it onto a seat or the center console, and it never slips around.
I know I probably sound like a crazed fanboy, but I am very impressed with the case/clip and have had it for about a month.
I would post a link but apparently I cannot until I make eight posts. Google Otterbox, their site is easy enough to navigate.
Click to expand...
Click to collapse
I bought mine from Amazon. Very nice and sturdy, and only cost me $8. The brand escapes my mind right now, but just search Fascinate Holster and it's like the first or second one on the list.
Sent from my Samsung Fascinate using Tapatalk.
I've purchased 4 of these for the 4 Fascinates my family and I have. They are great and we have no complaints. My son it pretty rough on his stuff and it has held up thus far. We got them in November.
I find it easy to slide thee phone in and out of, and it give the phone a bit more bulk and texture.
Look up the "Superior OEM for Samsung i500 Fascinate Shell Holster Combo Pack" on Amazon. This forum will not let me post a link for some reason. They are less than $10.
S_Gibson said:
I've purchased 4 of these for the 4 Fascinates my family and I have. They are great and we have no complaints. My son it pretty rough on his stuff and it has held up thus far. We got them in November.
I find it easy to slide thee phone in and out of, and it give the phone a bit more bulk and texture.
Look up the "Superior OEM for Samsung i500 Fascinate Shell Holster Combo Pack" on Amazon. This forum will not let me post a link for some reason. They are less than $10.
Click to expand...
Click to collapse
That's the one I have. I've had it for a few months now and I love it. Couldn't stand putting my phone in my pocket, I had to have the holster.
Had the OEM one for a year now and just a about 2 months ago busted the clip off, but i can still snap it back together, which has gotten be this far but the silly thing keep snapping off at the slightest touch...
will have to try out that naked carrier next
tried a little while carrying the phone in my pocket, fits nicely into the carpenter pants slot on the right leg side, but not so nice in any other pocket
I use a Comp-Tac M-TAC holster for my daily carry... oh wait, you mean phone?
Cargo pocket on my pants/shorts.

Can you recommend a car mount for the S4 Trident Kraken case ?

Hello ,
I am looking to see if there is a car mount for the S4 Trident Kraken case .
Would you be able to make a suggestion ? Does anyone have experience with this ? I am tired of having to always fumble for the phone in the console .
Thanks !
Mike
The3Genius said:
Hello ,
I am looking to see if there is a car mount for the S4 Trident Kraken case .
Would you be able to make a suggestion ? Does anyone have experience with this ? I am tired of having to always fumble for the phone in the console .
Thanks !
Mike
Click to expand...
Click to collapse
I resell for ProClip, and I'm sure many can attest to it on here,but their adjustable cradles are top notch. They make custom dash mounts, usually with multiple locations for just about every car out there as well. I'm on my phone at the moment or I'd send you some specific links, but hop on their website, and you can easily find your options. And any questions, ask away. I can also "publicly" save you 10% on their products, but can save you a little more via a PM.
www.proclipusa.com
Sent from my SPH-L720 using Tapatalk
Thanks for the reply. I am looking for a mount that will be compatible with my case S4 Kraken case . The mounts I saw were only for the phone .
http://www.proclipusa.com/phone-holders/device/samsung/galaxy-s4.cmsv
Just click on the check box at the left "with case". You'll get three options.
Sent from my SPH-L720 using Tapatalk
Thanks for the link. How do you know that the clip will work with my specific case ?
Thanks!
The3Genius said:
Thanks for the link. How do you know that the clip will work with my specific case ?
Thanks!
Click to expand...
Click to collapse
Well the one you'd most likely want is their medium adjustable. It's made with wider grooves to work better with the dual layer type cases. It specifies a device up to 0.62 inches thick. I never understood their methodology for this because the phones don't need to be fully captured in the grooves. As long as part of fits within, it's fine, and a majority of cases/phones have some sort of taper at the sides so device thickness is thinner at the outside edges. So you won't have any problems fitting your kraken'd phone in the holder.
Your only issue, if you want to call it one is the corners extend slightly beyond the sides. You could have a touch of left to right rock, but that would be doubtful because the holder is completely adjustable so you can loosen the screws, slide the phone in, press against the sides until it's snug, and tighten down. I'm sure that rubber is fairly grippy, and the ability to set the width so there's some resistance as you slide it in and out will keep it steady.
I've been doing this since I designed the first smartphone holsters for them (before Seidio said, oh ****, these things will sell, and then the rest of the injection molders hopped on board). I've sold quite a few adjustables for most cases out there including all the otterbox/lifeproof ones. Haven't had a return yet because they didn't like how their phone fit.
Your other option is to go with the cheap spring ratchet type ones where you rest it on the ledge and squeeze the sides until it's snug and press a button to release it. Then you're pretty much going with a vent or adhesive mount and most likely ProClip has a better dash mounting option for your car, though some older vehicles have limited options involving a vent area. They use crevices in the dash to lock their mounts in place. Some vehicles have better options then others. You can poke around and see the options for your car.
Hope that helps.
Up until about a week ago I was using the iBolt XPro dock with an Otterbox Commuter case. There was still a good amount of adjustability left so I'm sure it'll accommodate your case. And you get the added bonus (which the is reason I bought it in the first place) of charging and audio out from the USB cable.

Car Dash Recommendations

Hey all. I need a good car dash recommendation for my Note 4.
I'd like one that is perhaps a bit flexible with size, as I have a Spigen Tough Armor case on it, as well, and would like not to have to remove it to put it in and take it out of the dash mount.
Anyone have any recommendations that can suit this purpose?
Thanks in advance, and Amazon links are greatly appreciated, as well. First hand accounts are also generally more favored over just links, because I am asking for recommendations, after all.
i use an itian wireless charger with a samsung oem qi back and the iblason armorbox case. i mounted the itian vertically on the car dash with scotch outdoor waterproof double sided tape. it works very well. instant charging when i push it into the itian charger and i can pull it out with no problems. note that the phone is too heavy for the air vent mounting (it cracks the air vent) and the suction cup works very badly.
I use this one. Works great with uag case.
http://www.amazon.com/gp/aw/d/B004G1L52Q
Sent from the TermiNOTEr 4!
zurkx said:
i use an itian wireless charger with a samsung oem qi back and the iblason armorbox case. i mounted the itian vertically on the car dash with scotch outdoor waterproof double sided tape. it works very well. instant charging when i push it into the itian charger and i can pull it out with no problems. note that the phone is too heavy for the air vent mounting (it cracks the air vent) and the suction cup works very badly.
Click to expand...
Click to collapse
Thanks for your time, but that is, unfortunately, not what I am looking for. I already have a case, and do not worry about wireless charging, so this doesn't fulfill any of the criteria I mentioned.
borijess said:
I use this one. Works great with uag case.
http://www.amazon.com/gp/aw/d/B004G1L52Q
Sent from the TermiNOTEr 4!
Click to expand...
Click to collapse
Unfortunately this is a no-go for me as my CD player slot is behind my touch screen, and I actually use it, so this would not work for me. Thanks for your time, however.
I use the Bracketron Earth Elements Si magnetic mount, it works amazingly well. The magnet is easily strong enough to hold the phone securely, I've never had mine fall or shift even going over seriously bumpy back roads, and it has little feet that flip out for the phone to rest on that make it even more sturdy. You need to put a small metal plate on or in the back of the phone somewhere to give the magnet something to grip, I have mine under my battery cover because I use an S-View case but for you it would be even easier as you can just put the plate underneath your Spigen between it and the phone. As far as convenience and ease of use goes, I haven't found anything that even comes close! Once you try a good magnetic mount you'll wonder how you ever got along without it
Here's the link to the Bracketron site, like I said I use the Si mount but they also have a gooseneck version if you'd prefer.
http://www.bracketron.com/products/si-dash-mount#.VLPBdivF92s
Seriously, give it a try, you won't regret it ;P
I've had the Exomount 2 in my truck for 2 years and it's held my Garmin GPS, S3 and now my Note 4 with no problems.
http://www.amazon.com/Exogear-ExoMount-Dashboard-Holder-Samsung/dp/B0097KKLV2
Ram Mounts
http://www.rammount.com/products/phones#/
Get the holder and then choose whatever base you want. I had one of the x-mounts on my motorcycle and the phone never came out unless I TOOK it out.
Might be MORE than what you're looking for, but.... *shrug*
iOttie One Touch XL Windshield Dashboard Car Mount Holder for Amazon Fire Phone and iPhone 6 Plus (5.5), Galaxy S5/S4/Note4/Note3 (HLCRIO101)
http://www.amazon.com/gp/product/B007FH716W/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
I originally bought it for my Note 2 back in 2013. I now own a Note 4, I also have a Spigen Tough Case and it still fits perfectly.
ZzFDKzZ said:
iOttie One Touch XL Windshield Dashboard Car Mount Holder for Amazon Fire Phone and iPhone 6 Plus (5.5), Galaxy S5/S4/Note4/Note3 (HLCRIO101)
http://www.amazon.com/gp/product/B007FH716W/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
I originally bought it for my Note 2 back in 2013. I now own a Note 4, I also have a Spigen Tough Case and it still fits perfectly.
Click to expand...
Click to collapse
This is the ultimate stand ever manufactured. Small, safe (in case of crash), strong, quick, universal. There are many YouTube videos about it.
http://www.tetrax.com/
scicchi said:
This is the ultimate stand ever manufactured. Small, safe (in case of crash), strong, quick, universal. There are many YouTube videos about it.
Click to expand...
Click to collapse
That is WAY Overpriced! There's the same sort of thing on amazon, just type in "Magnetic Car Mount." 4 out of the first 5 are less than $15, and do the exact same thing.
Majin Kaioh said:
Hey all. I need a good car dash recommendation for my Note 4.
I'd like one that is perhaps a bit flexible with size, as I have a Spigen Tough Armor case on it, as well, and would like not to have to remove it to put it in and take it out of the dash mount.
Anyone have any recommendations that can suit this purpose?
Thanks in advance, and Amazon links are greatly appreciated, as well. First hand accounts are also generally more favored over just links, because I am asking for recommendations, after all.
Click to expand...
Click to collapse
I use an iBolt xPro, bought it a couple of years ago for my Galaxy S3, it fits fine for my Note 4 with Seidio Dilex Pro. It's adjustable in bot axes. I'd contact them and check about your case (if you like this one) to ask about your case/phone combo.
http://www.amazon.com/iBOLT-xProDock-car-speakers-extended-Batteries/dp/B00AOCSFYC
Any with Qi Charging? cd slot mount might be nice as well, damn useless slot!
ZzFDKzZ said:
iOttie One Touch XL Windshield Dashboard Car Mount Holder for Amazon Fire Phone and iPhone 6 Plus (5.5), Galaxy S5/S4/Note4/Note3 (HLCRIO101)
http://www.amazon.com/gp/product/B007FH716W/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
I originally bought it for my Note 2 back in 2013. I now own a Note 4, I also have a Spigen Tough Case and it still fits perfectly.
Click to expand...
Click to collapse
I bought one of these in April of last year for my Note 2, as well. However, when it arrived broken, I decided not to stick with it, and wound up not getting anything.
tedkord said:
I use an iBolt xPro, bought it a couple of years ago for my Galaxy S3, it fits fine for my Note 4 with Seidio Dilex Pro. It's adjustable in bot axes. I'd contact them and check about your case (if you like this one) to ask about your case/phone combo.
http://www.amazon.com/iBOLT-xProDock-car-speakers-extended-Batteries/dp/B00AOCSFYC
Click to expand...
Click to collapse
This one seems interesting. I may look into it and go with it. It's a bit higher priced, but it has some extra features that seem nice.
will the iOttie One Touch XL hold the note 4 with it's UAG case, or it's to big for any car mount?
I'm not looking for a magnetic one or CD/vent holder. just regular suction cup, that can hold a large case like the UAG.
MikaelPe said:
Majin Kaioh said:
Hey all. I need a good car dash recommendation for my Note 4.
Hi Majin, the xProDock from iBOLT has just become available in a new version that includes a 2.1 Amp car charger with an integrated Bluetooth aux-out streamer & hands-free, see http://www.amazon.com/iBOLT-xProDock-Bluetooth-Charging-aux-out/dp/B00PPAQRUW/ This is awesome if you have a car-stereo with a standard 3.5 mm aux-in port but without support for audio streaming (so called "A2DP"). See this short YouTube video how the streaming part works... Because Android phones can handle two Bluetooth connections at once (iPhone can't!) you can set this little unit to stream music/gps to your car-stereo and have a 2nd Bluetooth solution for hands-free. They will both reconnect automatically when you step into the car... Always cool to stream Pandora, Spotify, iHeart etc. to the car-stereo
The xProDock includes a pre-programmed NFC tag so you can start "DockMode" automatically when you step into the car. The free Dock'n Drive App (link) can start Bluetooth automatically, turn off WiFI, start the Hotspot and much more plus that it gives you a cool interface when you drive. Of course you can download this and use it with any other car-dock too.
Good luck finding the right solution for you!
Click to expand...
Click to collapse
Thanks. Unfortunately for me, I didn't wait. I bought the other one last month on the 22nd. I really like it, and to me the only downside is I need to reconnect the Bluetooth to my car stereo everytime I get in. A small downside, however.
Thanks again, i'd recommend this one to folks looking for a newer solution.
Click to expand...
Click to collapse
I have a truck and the iOttie touch 2 is amazing I have a note 4 in a spigen case and it goes no where and could not say better things about it.
Did you guys tried this one?
http://www.scosche.com/magic-mount-cell-phone-holder-tablet-mount
I bought it for my note4 but since it comes withbtwo magnets i also use with my tab 10.1. Awsome stuff. No pain when getting in the car. Just touch the magnetic pad and it never came off. Best 20€ i spent. Give it a try. I was looking for years for something that worked half as good as this!
Sent from my p4 using XDA Free mobile app
666pluto said:
will the iOttie One Touch XL hold the note 4 with it's UAG case, or it's to big for any car mount?
I'm not looking for a magnetic one or CD/vent holder. just regular suction cup, that can hold a large case like the UAG.
Click to expand...
Click to collapse
Found a store near me that sells both the iOttie One Touch XL & Easy One Touch 2. both fits the Note 4 with good grip. but when added with the UAG case, which is pretty thick, the XL holds it better. still, it's not 100% fit with the UAG case, but will do the job. so i bought it, had the chance to test it and so far it's great.
cjparker said:
Ram Mounts
http://www.rammount.com/products/phones#/
Get the holder and then choose whatever base you want. I had one of the x-mounts on my motorcycle and the phone never came out unless I TOOK it out.
Might be MORE than what you're looking for, but.... *shrug*
Click to expand...
Click to collapse
I've always liked RAM mounts because they tend to be bombproof, rock solid. I got this one for windshield mounting my Note 4:
http://www.gpscity.com/ram-mount-universal-x-grip-iv-locking-suction-cup-mount-ram-b-166-un10.html
I really like the easy adjustment for different viewing angles.
Recommend the Bull's eye car mount, the world's smallest one made from the highest quality anodized aluminium alloy
Bull's eye car mount

[Q] Bike Mount Compatible with Note 4 ?

Can someone recommend a bike mount compatible note 4, preferably under 20$ ?
I bought this one from Ebay, but the phone fell twice. The mount itself is very sturdy, but phone grip is poor. Fortunately the phone was inside Samsung protective case, so no harm done.
Many bike mounts are not big enough for large phones like note 4, so looking for suggestion if anybody is using a good quality one, which can hold the phone securely even on bumpy roads.
I've been looking for one too, and there are options on Amazon, but I'm considering just fab-ing my own with some metal I've got lying around.
sonicdh said:
I've been looking for one too, and there are options on Amazon, but I'm considering just fab-ing my own with some metal I've got lying around.
Click to expand...
Click to collapse
Seidio:
http://www.seidioonline.com/hl4-holster-bike-mount-p/mb1-hl4.htm
But you'd have to be using one of their case/holster combinations, or get the holster for the caseless Note 4:
http://www.seidioonline.com/samsung-galaxy-note-4-spring-clip-holster-black-p/hlssgt4as.htm
and assuming you'd want the phone 'face out' you'd need to check that it can be secured in the holster that way round, as I believe these are designed for 'face in' usage.
Kinsman-UK said:
Seidio:
http://www.seidioonline.com/hl4-holster-bike-mount-p/mb1-hl4.htm
But you'd have to be using one of their case/holster combinations, or get the holster for the caseless Note 4:
http://www.seidioonline.com/samsung-galaxy-note-4-spring-clip-holster-black-p/hlssgt4as.htm
and assuming you'd want the phone 'face out' you'd need to check that it can be secured in the holster that way round, as I believe these are designed for 'face in' usage.
Click to expand...
Click to collapse
Seidio is pure garbage. I had their Convert case w/ belt clip holster and the holster detached from the belt clip at the slightest pressure falling to the ground. Seidio Customer Service stated it was due to the size of the N4, funny I have no such problems w/ my Otterbox Defender. The Convert case itself is pure garbage too, the rubber outercover that goes over the Surface case is designed so poorly designed every time you use the fingerprint scanner it moves off the lip of the phone & the composition of the way too soft rubber is a dirt/lint magnet.
As far as buying anything from Seidio's online store read the thread I started about it. Worst experience I've ever had by far purchasing anything online. I paid for the freight to send back my Convert Add On Kit & Seidio refunded zero so now I have to initiate a chargeback w/ the bank that issued the credit card used to pay for it. And that was after I jumped through all the hoops they require to return something and after they issued an RMA.
http://forum.xda-developers.com/note-4/accessories/dont-want-to-buy-seidios-webstore-t3036913
Seidio has pure garbage products & the worst imaginable customer treatment and hassle to try to return something.
I used this Arkon Mega Grip in my car for several years/phones (incl. N4) and they make a bike mount for it. I can't vouch for the bike mount but I can say the spring loaded Mega Grip arms do hold the phone securely & I would think the elastic bungee would make certain the phone stays on the mount. It will be cheaper on Amazon.
http://www.arkon.com/megagrip/megagrip-bike-mount.html
I use one of these on my motorcycle
http://www.slipgripcarmounts.com/
I have always used the German made Herbert Richter brand of car holders. They are well made and last forever though I have never used their bike mount
After trying couple of them from from Ebay, I decided to make one of my own using some plastic and parts salvaged from the ebay ones.
It looks a bit ugly but does its job.
suhridkhan said:
After trying couple of them from from Ebay, I decided to make one of my own using some plastic and parts salvaged from the ebay ones.
It looks a bit ugly but does its job.
Click to expand...
Click to collapse
Lol. Worlds first ever Bike Phaser! Hope its set to stun!!!
Seriously though that is awesome job dude. I'm thinking of making my own as well because all the other ones just don't look that safe to me for mountain biking.
Jammol said:
Lol. Worlds first ever Bike Phaser! Hope its set to stun!!!
Seriously though that is awesome job dude. I'm thinking of making my own as well because all the other ones just don't look that safe to me for mountain biking.
Click to expand...
Click to collapse
I didn't see it that way before, but now that you mentioned, it looks a lot something like that.
I feel a lot safer biking with this one. I dropped my phone twice with other commercial mounts.
although they have been sold out for a while, this one from amazon works really well. i've fallen off my road bike 3 times and it held up 100%. the case is easily detachable. and touch screen works well with the clear cover.
the only thing i wish it did, was to have a slot for the light sensor so that i can answer phone calls on speakerphone and not have the screen always go black. besides that, it's great.
I use this one:
http://www.amazon.com/GreatShield-Clip-Grip-Handlebar-BlackBerry-Smartphones/dp/B00FA892IS/
Don't ride a very rough route to work but have not had my phone fall out. I also have just a flip case on the phone.
Slip Grip is the best, I have used them since my Droid Incredible days. They are custom molded to each phone and each case available for it. If the case is not listed email them and they will let you know which one has the precise dimensions to fit like a glove.
Slip Grip Galaxy Note 4
Note: I am paranoid and still use a bit of velcro to double secure the phone when mountain biking.
Here is a pic of my setup
View attachment 3349789
I'm still looking for a better option
mlee0921 said:
although they have been sold out for a while, this one from amazon works really well. i've fallen off my road bike 3 times and it held up 100%. the case is easily detachable. and touch screen works well with the clear cover.
the only thing i wish it did, was to have a slot for the light sensor so that i can answer phone calls on speakerphone and not have the screen always go black. besides that, it's great.
Click to expand...
Click to collapse
I use my note with the samsung original protective cover http://www.amazon.com/Samsung-Galaxy-Note-Protective-Cover/dp/B00NP3K8Y2 and I'm looking for a better option than the ones I have (see below). The Ibera case seems large enough, but its still sold out and I can´t find in any of the amazon European locations - but it does seem like a very good option.
I have something like this, which works well, but ist as little on the tight side.
http://www.ebay.com/itm/Bicycle-Fro...amsung-/201295830059?var=&hash=item2ede2a9c2b
and recently bought this, but this case is tighter than the pannier bag, so I'll be selling it
http://www.ebay.com/itm/360-Waterpr...Phones-/181813369752?var=&hash=item2a54ebdb98
I use the topeak 6" drybag
http://www.topeak.com/products/bags/smartphone_drybag_6in_bk
Fully waterproof, allows use of the screen, power button and home button. Also allows me to keep my phone in the Spigen slim armour case inside the drybag. There are several fixing types available, I've got mine strapped to the stem with the fixing which came with the bag.
Been looking for similar products. Thanks for these product ideas!

Categories

Resources