[Q] Help with Unlock after rooting - HTC Inspire 4G

Hi,
I rooted my inspire which is locked to ATT using the ACE Hack kit.
Now, if I insert a T-mobile Sim in it, it does not detect any signal, nor it does ask for a Unlock code. I tried to flash the STOCK ROM using Hack Ace, and that did not help.
I am in a kind of a stuck state and not sure of how to proceed with the unlock. Can any one help me out of this situation?

I'm going to go ahead and be nice and answer this. But this has been asked a lot and researching would get you a faster answer then waiting on someone to respond. If you did the hack kit correctly and gained soff then you are sim unlocked. It will not ask you for an unlock code.
Ad to no signal the sum cover needs to be put back on. And as a preemptive answer to two questions commonly asked after this is.
1) no 3g will not work on T-Mobile, nothing you can do. Unless you happen to live in SF where T-Mobile is testing out its 1900mhz 3g
2) still doesn't work- just because your sum unlocked doesn't guarantee any sum will work. I've had where my sister tmo doesn't work on my phone but my brothers sim will. So try another one
Sent from my Inspire 4G using XDA

Thanks for the response. It is the issue with Sim Cover. it is working fine after i put the cover back on.

Related

US Cellular Touch Pro 2 working on ATT?

Hi, I am sort of new here but I know enough to get around on what I need to do, but I am at a stand still...
I bought a US Cellular Touch Pro 2 from Ebay which was "unlocked" supposedly, but my ATT phone card does nothing in it, I can get digital roaming but ATT will not work on the phone.
So my question is, what are the needed steps in order to get my Touch Pro 2 to get working on the ATT network. As far as I know the Security is not unlocked.
Thanks ahead of time,
if you need any other information please ask =D
-Cyanide
Note: I bought an unlock code from Ebay earlier, but since it says its unlocked I cant use the code, unless there is another way to use that code.
if im right and some1 here can correct me if im not. i think u have to sim unlock it for it to work.
My US Cell TP2 came SIM unlocked
Same as above, my us cell tp2 came sim unlocked also
I just got one from ebay, and I had to security unlock it and install appropriate radio to get it working on at&t
Will any of the GSM labeled AT&T work or is there one that's best?
forum.xda-developers.com/showthread.php?t=549939
will it work with umts 850????
do you know if someone got it working????
I just bought three of these off ebay that were 'unlocked'
yes it says 'your phone is sim unlocked' in the security tab but my ATT cards are not working
someone mentioned adding software or something. can someone please show me how to do this asap. we kinda counted on having the phones today.
i bought a us cellular on ebay as well. had to security unlock it. Got code from this site and then bought from olipro. this should help.
http://rhodiumw.htc-unlocks.com/
http://pocketnow.com/tweaks-hacks/unlock-the-sprint-touch-pro2-radio-to-get-us-gsm
the first one you have to but then the second link you need to watch to get the imei number before you buy unlock stuff. hope this helps. trin to give back what i learned.
There are two different kinds of SIM Unlocks
There is the stock SIM unlock which allows you to use the sim card for other countries. You click on settings, and sim management and it says the sim is unlocked. However, that does not mean that you can use it with ATT or TMobile here in the united states. Reboot your phone and you will most likely see that your radio says something like 2.10.00WF The WF is what is screwin you over with ATT. You need to pay for and use the SIM unlock from Olipro, (there are tons of links already for it.) and unlock the phone. Then put a WU radio on it. I find that the best one that works for USCC is the 1.96.10WU Radio. It has the least amount of DATA crashes. Hope that helps ya out a bit.
jmy72 said:
There is the stock SIM unlock which allows you to use the sim card for other countries. You click on settings, and sim management and it says the sim is unlocked. However, that does not mean that you can use it with ATT or TMobile here in the united states. Reboot your phone and you will most likely see that your radio says something like 2.10.00WF The WF is what is screwin you over with ATT. You need to pay for and use the SIM unlock from Olipro, (there are tons of links already for it.) and unlock the phone. Then put a WU radio on it. I find that the best one that works for USCC is the 1.96.10WU Radio. It has the least amount of DATA crashes. Hope that helps ya out a bit.
Click to expand...
Click to collapse
weird. olinex recomended the 2.32.00wu radio over all the others. but seeing as how my data connection never wants to stay open, maybe i will give that one a try.
Ok so i got the paid unlocking tool and ran it. it appears to have worked.
I then went to this link
http://forum.xda-developers.com/showthread.php?t=578659
and installed both the us cellular and sprint (the first and fourth link).
was that a mistake?
Anyway it doesnt say att when i put in a non active sim card.
is it still ready to use? also when i install the radios should it be in global or gsm mode or does it matter?
nx_2000 said:
will any of the gsm labeled at&t work or is there one that's best?
Forum.xda-developers.com/showthread.php?t=549939
Click to expand...
Click to collapse
Do not install any of those GSM radios to any CDMA phone!!!!!
You will BRICK IT!!!!1
I got a US Cellular HTC TP2 phone too don't use those ****ing radios!
DaveNavy said:
The US Cellular Version on the TP2 is a CDMA AND GSM PHONE you can flash other ROMS than just CDMA this pork chop has no clue what he is talking about.
Click to expand...
Click to collapse
ummm, this is acdma phone with just a extra gsm radio so you can only flash CDMA roms
Wrong??!!! WTF! A troll in this forum?
DaveNavy said:
The US Cellular Version on the TP2 is a CDMA AND GSM PHONE you can flash other ROMS than just CDMA this pork chop has no clue what he is talking about.
Click to expand...
Click to collapse
YOU SHOULD BE BANNED FOR TROLLING AND MAKING FALSE STATEMENTS! YOU DON'T KNOW WHAT YOU'RE TALKING ABOUT!...
Why don't you go ahead buy a CDMA TP2 phone and flash a GSM radio or ROM, go ahead. And make someone record your face and the device. Let's see how you enjoy turning a working phone into a black death piece of hardware that will not respond or do anything.
You better delete your post before someone that doesn't know any better follow your misguided advice and brick their phone!
@DaveNavy,
Read up a bit on this device before advising people. Flashing a GSM rom on a native CDMA device (RhodiumW) is the best and fastest way to end up with a brick. Please make sure about these things before you post anything like this again.
@ all,
Please stop the flaming right here.
egzthunder1 said:
@DaveNavy,
Read up a bit on this device before advising people. Flashing a GSM rom on a native CDMA device (RhodiumW) is the best and fastest way to end up with a brick. Please make sure about these things before you post anything like this again.
@ all,
Please stop the flaming right here.
Click to expand...
Click to collapse
I dont think I was flaming. I wa just correcting his mistake
How long did it take after you paid to get the download link?
Works great using windows 7. I am running Att with data smooth now.

[Q] How to use D2G on AT&T

Hello all,
I'm planning on picking up a D2G locally to use on AT&T. So let me get this straight:
1) Buy D2G locally.
2) Flash with 2.4.29 SBF using RSD Lite.
3) I would need to unlock the phone. Can I do this without having an active Verizon account to activate the phone? I realize I can get the code from various resellers but would the phone need to be active on Verizon's network or just previously activated on Verizon's network?
4) Apply the edit cellzealot specified here: http://forum.xda-developers.com/showpost.php?p=16572174&postcount=22
At this point I should be able to use it on AT&T.
5) From what I read I should be able to install and use non-Moto ROMs.
My biggest questions are with steps 3 and 5. Could anyone clarify those steps for me? Is there anything else I should know? Any fixes for the reception issues?
Thanks!
Hi
This is what i have just got done with my D2G and it work great on att . I got 3.6 mb down and 1.8 mb up in NYC . On your step 4 you shoud do this its much easier : w w.mydroidworld.com/forums/android-hacks/8942-tbh-us-gsm-band-unlock-droid-2-global-pro-update-zip-public-release.html#post98026
Good luck !
Thanks, warlord002! I read a post mentioning that update.zip but didn't really look into it. Using the update.zip makes this whole thing a ton easier.
Any recommended ROMs?
vinvam said:
3) I would need to unlock the phone. Can I do this without having an active Verizon account to activate the phone? I realize I can get the code from various resellers but would the phone need to be active on Verizon's network or just previously activated on Verizon's network?
Click to expand...
Click to collapse
If you're lucky, and the purchased code works, you just input it and that's all.
Sweet, thanks for the help guys.
The phone isn't for me so I'll need a stable, functional ROM. I mean stock's always an option, but if there are better ROMs out there that are just as functional I'd rather use one of those. Suggestions?
Can you please explain step two for someone that is new at cdma phone hacking.
Picking up a D2G tomorrow morning. Are there any updates regarding gingerbread and the old radio? Any GB based ROMs out?
Also any websites that can give me the correct unlock code? Seems like its hit or miss for the most part and only Verizon has them forsure. I guess I'll have to do some social engineering and get that code from them somehow.
Sent from my GT-I9100 using Tapatalk
Well, JFYI: if you're on AT&T, you aren't getting Gingerbread.
Otherwise, Gingerbread update was called off and will be released later (“soon™”).
There is the update.zip from that OTA update, which can be installed.
There are some ROMs in development, but not production ready yet (at least on GSM).
Have fun with your social engineering, mostly because VZW wants you to be on a contract for at least 6 months to get the code.
Yeah I guess I'll stick with Froyo for the timebeing.
The social engineering is failing pretty hard. Tried at least 10 reps through different numbers and they all tell me the phone needs to be active on a line. My best bet now is to add some cash to the deal and ask the seller (vzw customer) to have it unlocked for me.
Sent from my GT-I9100 using Tapatalk
Many reps are telling me they can't even generate the code if the phone isnt active on their network. How true that is I don't know...
Sent from my GT-I9100 using Tapatalk
Picked up a D2G a few hours ago. The seller was nice enough to get the unlock code for me from Verizon!
SBFed to .29, rooted, bootstrapped, radio patched, and flashed to hexen all in an hour or so. No issues whatsoever. The D2G's running great on AT&T so far!
Glad to see a few more folks using this hack. It works well despite a few bugs in the original release build.
i got my D2G this morning, and soon ordered unlock code from ebay.
the seller get me the code IMMIDIATELY, and it works!
and the TBH's band hack helps me a lot. i'm now using t-mobile happily
Pls guys help me! I've just bought MY D2G from ebay, seller send my unlock code from verizon, I put it.. but when I inserted my new t-mobile sim, phone couldn't see any GSM network.. i flashed it already to 2.4.29, so what should I do next?
PLS help me, i really like this phone and dont wanna change it to another..
duercos said:
Pls guys help me! I've just bought MY D2G from ebay, seller send my unlock code from verizon, I put it.. but when I inserted my new t-mobile sim, phone couldn't see any GSM network.. i flashed it already to 2.4.29, so what should I do next?
PLS help me, i really like this phone and dont wanna change it to another..
Click to expand...
Click to collapse
Check here - one more thing to do before you can get T-Mobile on your D2G. Remember you will not be able to get 3G - only GSM, but it will work nicely (and battery life will be great). Don't forget to set the phone to GSM only in the settings - so it doesn't waste power to look for a 3G compatible network all the time.
Apparently you can rip out the radio firmware from TBH's 4.5.606 and still install it via CWM; it works with 2.4.330's baseband.
The question is whether it's possible to make a 2.4.330 update that also doesn't touch the radio firmware, so you could flash 2.4.29 SBF, update to 2.4.330 and then 4.5.606 without touching the baseband, and thus gain Gingerbread with AT&T.
Going through the exact same process! But I can't unlock my phone, I bought it on ebay, the seller said it was unlocked but its not. I tried two of the unlock sim sites with no luck -$20 and two non functioning codes .. Is there anyway to unlock my phone?
Only via Verizon.
you are supposed to be given 2 codes..just in case one of them doesnt work. i got my code form the unlock shack and no problems

myTouch 4G Slide sim unlocking

Here we go with yet another unlock solution.
This one applies to almost (if not all) devices which are radio S-off, it’s fairly easy to use and doesn’t wipe data/settings nor have that ugly side effect (when using diag files) in which you lose conectivity to mobile network.
Supported devices so far:
HTC Sensation (pyramid)
HTC Evo 3D (shooter)
HTC EVO 3D GSM (shooteru)
HTC myTouch Slide 4G
Click to expand...
Click to collapse
(by the use of revolutionary)
and:
Sprint EVO 4G
Droid Incredible (HTC Incredible)
HTC Desire CDMA (HTC BravoC)
Click to expand...
Click to collapse
(by the use of unrevoked 3 – not tested)
These are the required steps you have to take:
1. S-off your phone by using Revolutionary (if you haven’t already done that).
2. Fill in the form with the required data. This will generate an unique Config.dat file for your device. Please enter a valid email address, as you’ll be sent there the link to download the file.
This step you'll have to take here
3. Put the file on the root of your sdcard and reboot your phone into HBOOT (adb reboot oem-42). Once you’re there, navigate to Simlock and press Power. The phone will load the file and remove the simlock. Some text will appear on the screen and at a certain point you’ll be asked to press Vol-Up to restart the phone.
4. Just do it, and you’ll be done!
PLEASE NOTE!:
This solution is heavily linked to the device it's being applied to by the use of IMEI, which can be considered a breach in security.
DISCLAIMER:
This solution provided for you on this site is given AS IS and in GOOD FAITH and is based on the research I made. I may not accept any liability or responsibility for the use of this applicaton.
If you find this tool useful and appreciate my work, Paypal me a beer, it helps development a lot..
​
This really should be in the development section.
Sent from my myTouch_4G_Slide using xda premium
if you just need a SIM unlock, call T-Mobile and they will give you an unlock code. there is no need to fuss around with complex steps.
Climbguy said:
if you just need a SIM unlock, call T-Mobile and they will give you an unlock code. there is no need to fuss around with complex steps.
Click to expand...
Click to collapse
Not for certain circumstances.. T-Mobile will only give it you you if you meet some criteria.. i.e. you're account has been active for 6 months.. I don't know what the actual criteria are.. that was just an example...
not to mention that you have to wait over 24hours to get the email with the unlock code.. this method was a lot faster than a half hour phone call with a t-mobile rep.
I was a customer for about 6 days and was given the code over the phone.
michaelmab88 said:
Not for certain circumstances.. T-Mobile will only give it you you if you meet some criteria.. i.e. you're account has been active for 6 months.. I don't know what the actual criteria are.. that was just an example...
not to mention that you have to wait over 24hours to get the email with the unlock code.. this method was a lot faster than a half hour phone call with a t-mobile rep.
Click to expand...
Click to collapse
Climbguy said:
I was a customer for about 6 days and was given the code over the phone.
Click to expand...
Click to collapse
And I'm not, never have been, and never will be... a tmobile customer....
Just unlocked my friend's MT4GS and it works great with her prepaid running on AT&T's network! This method works great.
Link in my sig has another way using terminal emulator. Ill add this to the compendium
sent from my sense on crack MT4G Slide using xda premium
Silly question but, this method will not work on a mytouch 3g slide right? I mean can revolutionary sim unlock a mt3g?
enelyam said:
Silly question but, this method will not work on a mytouch 3g slide right? I mean can revolutionary sim unlock a mt3g?
Click to expand...
Click to collapse
Rev is used to gain s off that's all. Which allows unsigned flashing
As for the unlock methods you may want to test this out my sig has this method and one using terminal emulator method no idea if they will work.
sent from my sense on crack MT4G Slide using xda premium
Droidmoder said:
Rev is used to gain s off that's all. Which allows unsigned flashing
As for the unlock methods you may want to test this out my sig has this method and one using terminal emulator method no idea if they will work.
sent from my sense on crack MT4G Slide using xda premium
Click to expand...
Click to collapse
I know this thread is WAAAAY old, but wanted to let people know this still works.
I went to this link: http://forum.xda-developers.com/showthread.php?t=1801106
And followed the instructions to achieve S-OFF on a stock ROM. Then followed the instructions from the post.
For returning to stock, I just had to google the filename to find a working mirror, as those provided in the articles don't seem to be working. Thanks OP!
my touch 4g Slide NO CALLS with S-off sim unlocked METROpCS
So its 2014.. I know I should get a better phone.. Good news its I got my my touch 4g slide bootloader unlocked and S-off. Also did the sim unlock on the site that emails you back the file and unlocks the sim.. BUT here is my problem
when I put my metro sim in the phone.. no matter which rom I load (which I can now load rom recovery from sd) the phone wont work..
When I go into the settings metropcs and att show up but when I try and select it, it tells me not allowed right now, or sim card doesn't allow that connection. So I cannot get it to work. Is there a way they are locking sim cards to their phones?
I would have thought getting S-off and running the simlock file I'd be good to go.. Anyone PLZ help I am desparate to figure out what is wrong here.
Picture Of S-off UNLOCKED bootloader NO SVC
Here is a picture of the phone.. Likewise no SVC with metro sim.. I don't have a tmobile card to test with but I think either the sim lock didn't work, or metropcs is somehow locking the sim to IMEI
Anyone with ideas here plz help. If it is IMEI to sim is there a way to unlock sim or change iMEI? I know its illegal to change an ESN but imei..
Also if its blacklisted would it be blacklisted for metro too?
i57.tinypic.com/2my6a6g.jpg add the http part
Simbalage22 said:
Here is a picture of the phone.. Likewise no SVC with metro sim.. I don't have a tmobile card to test with but I think either the sim lock didn't work, or metropcs is somehow locking the sim to IMEI
Anyone with ideas here plz help. If it is IMEI to sim is there a way to unlock sim or change iMEI? I know its illegal to change an ESN but imei..
Also if its blacklisted would it be blacklisted for metro too?
i57.tinypic.com/2my6a6g.jpg add the http part
Click to expand...
Click to collapse
So I thought of a couple things. With a little research, one got shot down right off the bat:
http://www.phonescoop.com/carriers/carrier.php?c=11
http://www.gsmarena.com/t_mobile_mytouch_4g_slide-4018.php
Some carriers use weird frequency bands that the phone wouldn't support. MetroPCS uses 1700 or 1900MHz (depending where you are), which the phone totally covers. So not that.
Related to that though, is the APN settings. If you have more than one (my Rogers setup has 4), it may be stuck on an APN that just isn't working for you. So Settings > Mobile Networks > Access Point Names.
Finally (just thought of it), you may want to test your MetroPCS SIM card on a different (smart)phone. I had recent problems with my SIM (I guess it was swapped out too many times, besides being 6-7 years old), although it worked fine on a feature phone. And if you can get your hands on a different SIM (T-Mobile or otherwise), and encounter the same problem, it could very well be a (hard-to-resolve) problem with the phone. If it is blacklisted, it would be blacklisted nationally if not internationally, and there is an IMEI database to check it against:
http://www.imei.info/
Hope this helps.
Check your imei for blacklist status on the tmo website. MetroPCS is now wholly owned by TMo, it shouldn't need to be unlocked. AT&T and Tmo share blacklist data as well. If your phone is sketchy you are out of luck.
If the SIM is old you might try a new one and see if that helps.
Hastily spouted for your befuddlement
MetroPCS marries SIM to IMEI
Coug76 said:
Check your imei for blacklist status on the tmo website. MetroPCS is now wholly owned by TMo, it shouldn't need to be unlocked. AT&T and Tmo share blacklist data as well. If your phone is sketchy you are out of luck.
If the SIM is old you might try a new one and see if that helps.
Hastily spouted for your befuddlement
Click to expand...
Click to collapse
ok So my cousin has a metro. Tried her sim,same results. So I said hmmm. Stuck her metro sim in my metrophone and vice versa. Same result.. So I I am thinking witgh 4g unlimited they are locking the sims. Called and wa told they marry the sim to the imeI. LOOKS like the days of swapping sims to different phones are over. Anyone know a way around this PLZ let me know. ALSO tethering would be cool but i'll google that.. comes as an FYI
Simbalage22 said:
ok So my cousin has a metro. Tried her sim,same results. So I said hmmm. Stuck her metro sim in my metrophone and vice versa. Same result.. So I I am thinking witgh 4g unlimited they are locking the sims. Called and wa told they marry the sim to the imeI. LOOKS like the days of swapping sims to different phones are over. Anyone know a way around this PLZ let me know. ALSO tethering would be cool but i'll google that.. comes as an FYI
Click to expand...
Click to collapse
I was looking into this, and this forum thread came up:
http://www.howardforums.com/showthr...-married-to-ESN-of-one-phone-only-that-sucks!
Looks like you can transfer phones by letting MetroPCS know of the new IMEI, but you cannot register two (or more) IMEI's for the same SIM. So depends on how you want to use your Doubleshot. I'd give them a call (or better yet, go into their store), maybe the old IMEI will still work (the thread was a bit iffy on this result) with the new (Doubleshot) one entered.
Thanks
joel.maxuel said:
I was looking into this, and this forum thread came up:
Looks like you can transfer phones by letting MetroPCS know of the new IMEI, but you cannot register two (or more) IMEI's for the same SIM. So depends on how you want to use your Doubleshot. I'd give them a call (or better yet, go into their store), maybe the old IMEI will still work (the thread was a bit iffy on this result) with the new (Doubleshot) one entered.
Click to expand...
Click to collapse
Wow! so that's a bummer. I really like the doubleshots keyboard but I think the exhibit from them is better. Although I tried several firmwares on it and Netflix will no longer work with custom roms (thank DRM for that) I did get hella mods to this one, but would love to have both, I was thinking the sim was somehow locked. I have a sim reader any software to check? copy clone??? new to GSM, but know lots about CDMA.. I wish it were easy to just clone IMEI like ESNS

(Q) Is My HTC Inspire Unlocked?

Hey all, sorry for the noob question, I have always unlocked Motorola phones in the past, because at my work, ATT doesnt get signal (My provider), but when I unlocked my Motorola phones, then I would get great signal from T-Mobile, and Cell One.
Well now I got this HTC Inspire, rooted it with the Ace Hack Kit (S-off, and all that), got CM7 on it.
BUT at work, I scan for signal, and all it shows is AT&T (Which doesn't get barely any signal at work). So why doesn't it find T-Mobile or another provider which has signal there?
Also I noticed my dad's iPhone does the same thing, even though his is factory unlocked, it won't use any towers besides AT&T. That really sucks IMO, because I always unlocked them, to get my full potential siginal..
Anyways if anyone could answer this, I'd greatly appreciate it. I could stick in another sim to make sure it's unlocked, but I'd have to buy one on ebay, and then I read all over that the Ace kit unlocks it, so I'm like wtf..
EliteGeek91 said:
Hey all, sorry for the noob question, I have always unlocked Motorola phones in the past, because at my work, ATT doesnt get signal (My provider), but when I unlocked my Motorola phones, then I would get great signal from T-Mobile, and Cell One.
Well now I got this HTC Inspire, rooted it with the Ace Hack Kit (S-off, and all that), got CM7 on it.
BUT at work, I scan for signal, and all it shows is AT&T (Which doesn't get barely any signal at work). So why doesn't it find T-Mobile or another provider which has signal there?
Also I noticed my dad's iPhone does the same thing, even though his is factory unlocked, it won't use any towers besides AT&T. That really sucks IMO, because I always unlocked them, to get my full potential siginal..
Anyways if anyone could answer this, I'd greatly appreciate it. I could stick in another sim to make sure it's unlocked, but I'd have to buy one on ebay, and then I read all over that the Ace kit unlocks it, so I'm like wtf..
Click to expand...
Click to collapse
Enter the correct apns for t mobile or flash a ROM that has T-Mobile carrier options.
As for the iPhone I couldn't tell ya
Sent from my Inspire 4G using xda premium
If you used Ace Hack Kit, then your phone is probably unlocked. Whose is your carrier?
For the iPhone, when you say factory unlocked, do you mean AT&T unlocked it. I don't know that any iPhones come unlocked from the factory. When AT&T unlocks a phone (or gives you an unlock code) I think it will only use a non-AT&T signal if AT&T isn't available, i.e. in another country.
pazzo02 said:
For the iPhone, when you say factory unlocked, do you mean AT&T unlocked it. I don't know that any iPhones come unlocked from the factory. When AT&T unlocks a phone (or gives you an unlock code) I think it will only use a non-AT&T signal if AT&T isn't available, i.e. in another country.
Click to expand...
Click to collapse
Thanks all, and yes his iPhone is factory direct unlocked.. Bought straight from Apple.
Anyways, thanks. I will manually enter the T-Mobile APN and see what that does..

Sprint HTC A9 Sim Unlock

Hello I have a Sprint HTC A9 that has been successful unlocked for domestic use, but I have voice with no data. I have S-Off, boot loader unlocked, running stock os. Has anyone else ran into this problem? Can someone please advise?
A friend mentioned that the Sprint variant might not have correct bands installed to be compat with other carriers. I'm wondering if replacing the radio firmware with the developer edition version would work, but I can't get around simlock to test.
HTC A9 Sprint Unlock success!!
Please share? I've been trying for days and made little progress.
There is a guy from Craigslist in my area that did it and he will not tell me, I asked. If there is any kind of way that I can back it up, screen shot it, or whatever. Someone please let me know. I don't have any personal data on it, because it has no data so I'm not using it yet. I don't care about sharing. Let me know and I'm more than happy to.
Devicerepair said:
There is a guy from Craigslist in my area that did it and he will not tell me, I asked. If there is any kind of way that I can back it up, screen shot it, or whatever. Someone please let me know. I don't have any personal data on it, because it has no data so I'm not using it yet. I don't care about sharing. Let me know and I'm more than happy to.
Click to expand...
Click to collapse
If it's an MSL code, he should have supplied that for you. I think MSL is unique to the IMEI/MEID/ESN of your device.
About your successful unlock, congrats! Your success let's me know it's do-able. I'm calling a local computer repair shop that offers unlocking services tomorrow. :fingerscrossed:
I've tried a half dozen ways to get this phone unlocked, but so far I've come up empty except for one scenario:
S-OFF
1. Change CID/MID to unlocked and flash unlocked RUU. Phone works fine, radio not functional.
2. Change CID/MID to sprint and flash sprint RUU. Phone will work with T-mobile SIM for one boot-up. As soon as phone is rebooted the SIM locks.
You can't just reflash the sprint RUU either. If you want to get another successful boot, you have to flash the unlocked RUU, then the sprint RUU and you'll get one boot. My only guess is something in the partitions is zero'd out by the unlocked RUU. I've also tried using the CM13 build immediately after the sprint RUU, and again I get one boot, but as soon as I reboot, CM13 shows sim not inserted.
Perhaps someone can make sense of this.
Attached screenshot proof unlock A9 Sprint, this unlock successfull :laugh:
Lussardi said:
Attached screenshot proof unlock A9 Sprint, this unlock successfull :laugh:
Click to expand...
Click to collapse
That not unlocked! I used mine in mexico to! Call sprint, they will unlock it for UMTS and HSP for free! Put a US AT&T sim in it and show me....
Cheers,
disco
disco_y2k said:
That not unlocked! I used mine in mexico to! Call sprint, they will unlock it for UMTS and HSP for free! Put a US AT&T sim in it and show me....
Cheers,
disco
Click to expand...
Click to collapse
i live in overseas and its worked for me :laugh::laugh::laugh:
Lussardi said:
i live in overseas and its worked for me :laugh::laugh::laugh:
Click to expand...
Click to collapse
which method you have used to unlock it?
hmmm.....I am seeing exactly the same thing. put in T-Mobile's sim card. the phone is working fine but no data. anybody got Sprint version of HTC A9 to work on GSM network?
scsc168 said:
hmmm.....I am seeing exactly the same thing. put in T-Mobile's sim card. the phone is working fine but no data. anybody got Sprint version of HTC A9 to work on GSM network?
Click to expand...
Click to collapse
put the correct APN and DATA works fine
Lussardi said:
put the correct APN and DATA works fine
Click to expand...
Click to collapse
Wow.... you are a life saver Lussardi! Thank you very much!
My HTC A9 has delivered APN setting, which cannot be modified. However, I was able to create a new APN manually and use that one. After that, data started to work. So far, I see it was able to connect to 4G and also LTE. At one place with strong LTE signal, i tested the download speed, and it was 82mbps. I have never seen that kind of download speed on my iPhone.
Thanks,
Sean
// , Did you unlock an HTC One A9 [Sprint] for complete LTE on T-Mobile or on AT&T?
// , Let me make sure I understand this correctly.
Can I do the following:
1. Unlock a Sprint HTC One A9.
2. Buy a data-enabled T-Mobile SIM card or AT&T SIM card.
3. Enter APN & Data settings.
4. Use that same HTC One A9 with T-Mobile or AT&T, with no loss in performance?
If this is true, that surprises and pleases me.
I assume that one can unlock an AT&T HTC One A9 for use with T-Mobile with no loss in performance, as well?
I found the following for my research about this question:
https://unlocklocks.com/blog/how-to-unlock-htc-one-a9-by-unlock-code/
http://forum.xda-developers.com/sitesearch.php?q=htc one a9 unlock
http://forum.xda-developers.com/one-a9/general/sim-unlock-free-help-to-help-t3307036
Adjutant said:
// , Let me make sure I understand this correctly.
Can I do the following:
1. Unlock a Sprint HTC One A9.
2. Buy a data-enabled T-Mobile SIM card or AT&T SIM card.
3. Enter APN & Data settings.
4. Use that same HTC One A9 with T-Mobile or AT&T, with no loss in performance?
If this is true, that surprises and pleases me.
I assume that one can unlock an AT&T HTC One A9 for use with T-Mobile with no loss in performance, as well?
I found the following for my research about this question:
https://unlocklocks.com/blog/how-to-unlock-htc-one-a9-by-unlock-code/
http://forum.xda-developers.com/sitesearch.php?q=htc one a9 unlock
http://forum.xda-developers.com/one-a9/general/sim-unlock-free-help-to-help-t3307036
Click to expand...
Click to collapse
My Sprint version of HTC A9 has been working on T-Mobile's network for almost a week now. I see no issues so far. Data connection is still good with connecting to LTE most of the time.
scsc168 said:
My Sprint version of HTC A9 has been working on T-Mobile's network for almost a week now. I see no issues so far. Data connection is still good with connecting to LTE most of the time.
Click to expand...
Click to collapse
What process did you go through? Can you provide a little more detail? Thanks...
motoelliot said:
What process did you go through? Can you provide a little more detail? Thanks...
Click to expand...
Click to collapse
i am not sure if my experience is any different from others here. but, here's the detail of what i went through....
My Sprint variant of HTC A9 was purchased directly off htc.com back in 11/2015. Since the phone was paid in full, I believe the phone was not locked to begin with. I had been using it on Sprint for the past 10 months. Just recently i switched my plan to T-Mobile. With T-Mobile's sim, I see the phone picked up the sim card. Phone started to work (i can make/receive calls) but data would not work. I talked to a couple of HTC rep for support. Both of them told me it should work. From their understanding, A9 and the new HTC 10 should work on all US major carriers...especially mine is a CDMA phone. According to them, CDMA ones can work on GSM....but GSM would not work on CDMA network. Anyways, they were no help for me.
I started doing research on my own and found many people experiencing the same. Phone would work but data would not connect. It was not working until a member on this board, Lussardi, came to rescue. He suggested to manually put in APN. So, I started to check out the APN setting. I see with t-mobile's sim card in, the phone is using a delivered T-Mobile APN setting. I went ahead and created one myself named T-Mobile Manual. I put in APN: fast.t-mobile.com and MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc and left everything else default. After I selected to use this new APN, the phone started to pick up mobile data. Now, depending on the area that i am in, i can see it's using either 4G or LTE. At one place with strong LTE signal, i did a speed test. It was over 80mbps.
Anyways, that's all. Good luck everyone.
// , Thank you!
// , Thanks for the thorough response, and for not just giving up.
The large corporations generally don't care too much about usability for this sort of outlier customer experience.
Can you give any instructions on how you unlocked the sprint version of the HTC A9?
Thanks.

Categories

Resources