Database Info

Bootloop! & Can't mount SDCARD

I have a Glaxaxy S SCL i9003 from Spain and after flashing KPE via Odin it booted into recovery and it showed a few errors in red. Then I rebooted the phone and now it shows the first static logo (that says Samsung Galaxy S i9003) and then it loops in the second boot screen (the one with the animated samsung logo)
Booting into recovery shows this:
Code:
E:failed to mount /data (No such file or directory)
-- Copying media files...
E:failed to mount /sdcard (File exists)
E: copy_dbdata_media:Can't mount SDCARD:
your storage not prepared yet, please use UI menu for format and reboot actions
Media files copy failed
# MANUAL MODE #
-- Appling Multi-CSC...
Installing Multi-CSC
Can't access to '/system/csc/XEC/system/'
Successfully applied multi-CSC
EDIT: I've now flashed a Froyo ROM. Same problem but different errors in recovery:
Code:
-- Movi_check Start..!!
movinand open fail
Movinand Checksum Confirmation Fail
lfs pass open fail
-- movi_checking undone!...
update media, please wait...
E: Can't mount /dev/block/mmcblk0p1 (No such file or directory)
E: copy_dbdata_media:Can't mount SDCARD:
your storage not prepared yet, please use UI menu for format and reboot actions
copy default media content failed.
¿Any solutions?

ktix007 said:
I have a Glaxaxy S SCL i9003 from Spain and after flashing KPE via Odin it booted into recovery and it showed a few errors in red. Then I rebooted the phone and now it shows the first static logo (that says Samsung Galaxy S i9003) and then it loops in the second boot screen (the one with the animated samsung logo)
Booting into recovery shows this:
Code:
E:failed to mount /data (No such file or directory)
-- Copying media files...
E:failed to mount /sdcard (File exists)
E: copy_dbdata_media:Can't mount SDCARD:
your storage not prepared yet, please use UI menu for format and reboot actions
Media files copy failed
# MANUAL MODE #
-- Appling Multi-CSC...
Installing Multi-CSC
Can't access to '/system/csc/XEC/system/'
Successfully applied multi-CSC
EDIT: I've now flashed a Froyo ROM. Same problem but different errors in recovery:
Code:
-- Movi_check Start..!!
movinand open fail
Movinand Checksum Confirmation Fail
lfs pass open fail
-- movi_checking undone!...
update media, please wait...
E: Can't mount /dev/block/mmcblk0p1 (No such file or directory)
E: copy_dbdata_media:Can't mount SDCARD:
your storage not prepared yet, please use UI menu for format and reboot actions
copy default media content failed.
¿Any solutions?
Click to expand...
Click to collapse
Flash cf root and try to entr into cwm recovery and wipe data.
The try to flash xxkpe twice and xxkpq. Factory reset after each flash.
Sent from my GT-I9003

sirilpta said:
Flash cf root and try to entr into cwm recovery and wipe data.
The try to flash xxkpe twice and xxkpq. Factory reset after each flash.
Sent from my GT-I9003
Click to expand...
Click to collapse
I managed to get into CWM and wipe data. But after flashing kpe and kpq it does the same thing again.

assuming u done every thing right
then this will be hardware problem
take the hand st to sumsung support after flashing original firm

internal sndisk sd memory corrupted. rehot or replace.

getting boot loop in my galaxy GT-I9003
i was trying to upload android from odin, but my system os maybe corrupt. evrytime its rebooting( boot loop). samsun galxy symbol again reboot. even USB port is also not detected by PC. so kindly help me how can i restore to old or to update with new os.
kindly provide the help in this regard and also support files if any.

[Q] Need PIT File for P6210 Model US WIFI

Hello,
I need a PIT file for the Galaxy Tab Plus 7.0 US WIFI P6210 model. I'm soft bricked and reflash of the PDA file with Odin has not corrected my boot lockup. I've found and downloaded a copy of a PIT file for the P6200, but I'm afraid to load it in the event I screw the unit up worse (arguably, what could be worse than a tablet that won't run).
Any assistance would be appreciated.

Right after flashing the ODIN package, try booting into the "stock recovery" before actually booting your tab up. Clear cache and data, then try rebooting your tablet again.
Sent from my SPH-D700 using xda premium

Unless you misused a PIT when flashing before, you shouldn't have a need for a PIT to fix.

OK, I tried reflashing the Odin package (three files boot, CSC and PDA) using Odin 1.8.5 It appears to run to completion. Then when rebooting I get E: failed to mount /cache (No suchfile or directory)
E: Can't mount /cache/recovery/command
*manual Mode*
--Updating application--
E: failed to mount /efs (no such file or directory)
install application for customer: Can't mount /efs
copy application failed.
--Applying Multi-CSC--
E:failed to mount /efs (no such file or directory)
E:multi_csc:Can't mount efs
Multi-csc applied failed.
E:failed to mount /cache (no such file or directory)
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/log
E:failed to mount /cache (no such file or directory)
E:can't mount /cache/recovery/last_log
E:can't open cache/recovery/last_log
E: failed to mount /cache (no such file or directory)
Then from menu I select wipe cache partition and get
--Wiping cache...
Formatting cache...
E:format_volume: make_extf4fs failed on /dev/block/mmcblk0p7
Cache wipe complete.
E:failed to mount /cache (no such file or directory)
E:can't mount /cache/recovery/log
E:can't open /cache/recovery/log
E:failed to mount /cache (no such file or directory)
E:can't mount /cache/recovery/last_log
E:can't open /cache/recovery/last_log
E:failed to mount /cache (no such file or directory)
Then I
wipe data/factory reset
Select - YES- Delete all user data
Get the following messages:
--Wiping data..
Formatting data...
E:format_volume: make_extf4fs failed on /dev/block/mmcblk0p9
Formatting... /cache...
E:format_volume: make_extf4fs failed on /dev/block/mmcblk0p7
Data wipe complete.
E:failed to mount /cache (no such file or directory)
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/log
E: failed to mount /cache (no such file or directory)
e: Can't mount /cache/recovery/log
E:can't open /cache/recovery/log
E:failed to mount /cache (no such file or directory)
E:can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
E: failed to mount /cache (no such file or directory)
Then I select reboot system now
Then I get about 5-6 more red "can't mount", failed to mount" messages that go by too fast to copy, it reboots and gets to the Samsung Galaxy Tab 7.0 Plus screen and it just freezes at this point.
In a different post I stated that how the Tab became locked up was I started getting SOD Screen of Death spontaneous reboots and heated battery symptoms, sometimes on the charger, sometimes not. I could always reboot it and it would then act normally for a while (1-2 days), then start with the reboots and warm battery again. About a week ago, I woke up and found the Tab (on the charger), stuck on the Galaxy Tab startup screen. Repeated reboots kept getting back to a lockup on the startup screen. Since then, I did some reading, found a copy of Odin and loaded two different PDA files, both for the P6210 supposedly, they each mounted successfully per Odin and then kept getting similar error messages like the above and a lockup on startup at the end. After trying loading the PDA files by themselves, I then tried loading the CSC and bootloader files to an Odin run with the PDA file that came in the zip file with the CSC and bootloader files. I don't know much about Android but know a little about programming, windows and DOS. It seems like I am either missing a bunch of files or the directory structure is missing a bunch of folders, which is why I could only see that the PIT file with a repartition may be the only thing to get me out of this (assuming the repartition also loads a directory structure onto the Tab - don't know if this is the case or not). The other possibility I suppose is that there may be an electronic problem with the unit, but usually you get a complete failure and not a reboot lockup.

Just so I'm clear on the above post, as soon as I flashed the package, I unplugged the Tab from the PC and held power + sound up, got into stock recovery and cleared cache and then cleared data. The error messages above were what I got doing these things.

Same Problem
Did you ever get it out of the boot loop?
I did the same as you but to no effect - anyone know if samsung will replace these "defective" units? Clearly there is something very wrong given the thousands of hits that have the same problem.
K

i got same problem with my p6200 tab 3 month ago,
i solved with pit file
u should find pit file to solve this problem

as i saw you can get the .pit file by opening and extracting the firmware(md5 file) with winrar.
just my 2 cents

Where is the PIT file?
tzacapaca said:
as i saw you can get the .pit file by opening and extracting the firmware(md5 file) with winrar.
just my 2 cents
Click to expand...
Click to collapse
I extracted all the files - nothing with PIT. Do I need to open the img files too?
thanks,
K

Got a PIT - flashed - now can't mount system
Otherwise the cache is now there and I get an updating message right after reboot - tried the clear cache and reset - which works (no failure notices).
But...get a failed to mount /system (invalid argument) for both updating app and applying multi-CSC now and of course still in the logo boot loop.
Ideas?
Thanks!
K

Any luck on this?

Any luck?
submicron said:
Hello,
I need a PIT file for the Galaxy Tab Plus 7.0 US WIFI P6210 model. I'm soft bricked and reflash of the PDA file with Odin has not corrected my boot lockup. I've found and downloaded a copy of a PIT file for the P6200, but I'm afraid to load it in the event I screw the unit up worse (arguably, what could be worse than a tablet that won't run).
Any assistance would be appreciated.
Click to expand...
Click to collapse
Hi Submicron,
I'm on the same situation. After flashing 4.0.4, wifi became unstable. Someone said that I should flash a pit file, I did and now I'm bricked. Did you solved, or found a working pit file for the P6210? Thanks in advance.

I'm also having troubles with wifi on ICS (but not on HC, strange)... Unfortunately I own a P6200 and my .pit file won't help you.
Submicron, do NOT use a P6200 pit file, it will render you tab unusable, as I've read they have different partition layouts.
And I know it already is unusable, but anyways... ;P
I bet someone will pop here with a PIT file for P6210 soon enough, so hang in there :good:

Pit file end of 1st post
http://forum.xda-developers.com/showthread.php?t=1667886

acuratlsfan said:
Pit file end of 1st post
http://forum.xda-developers.com/showthread.php?t=1667886
Click to expand...
Click to collapse
I found some.
Here
http://www.droidevelopers.com/f363/11722-[download]-ops-pit-files.html

[Q] wipe on stock ics and stuck on galaxy note logo

HI
Im using rooted stock ics galaxy gtn 7000 and wipe data on stock recovery after that my phone stuck on Samsung logo I tried almost every thing used odin pit file with stock ginger bread rom. it shows pass message under pc odin but when come to device it reboot it also but get the following error
E: failed to mount / data (unknown error: 0)
-- copying media files..
-- updating application ..
E:filed to mount / data (unknown error: 0)
E: install_application_for_customer:Cant's mount /data
your storage not prepared yet. please use UI menu for format and reboot actions. copy application failed.
-- Appling Multi-CSC...
installing Multi-CSC
Copied the packages.
Copied the default_wallpaper file.
Coplied the power on / off animation files.
Can't access to '/system/csc/TGY/system/'.
Successfully applied multi-CSC.
I still can go to recovery mode which shows the below option and can go to download mode also
reboot system now
apply update from sdcard
wipe data/factory reset
wipe cache partition
test redbend fota[FS]
any help in this will be highly appreciated

HARD BRICKED SAMSuNG GALAXY SL HELP !

ok here is my problem
SAMSUNG GALAXY SL I9003
DOESN'T BOOT UP
Cant be recognized from any computer .
Can't try odin nth from computer , i have cleaned the usb port so can't be it .
I want to make a last try by selecting update from sdcard , i will place the original stock rom of this phone to sd card from computer will insert in , and hope it works .
I dont have cwm all stock on this phone
i can get in download and recovery mode .
in recovery mode when trying to wipe everything it says
E:failed to mount /data (No such file or directory)
--Copying media files...
E:failed to mount/sdcard (File exists)
E:copy_cache_media:Can't mount /sdcard
your storage not prepared yet , please use UI menu for format and reboot actions .
Media Files copy failed.
Manual MODE #
-- Appling Multi-CSC...
Installing Multi-CSC
Can't access to '/system/csc/ITV/system/'
Successfully applied multi-CSC.
E:failed to mount /sdcard (File exists)
--Wiping data...
Formating /data...
E:format_volume: rfs format failed on /dev/block/mmcblk0p3
Formating /dbdata...
Formating /cache...
Data wipe complete.
--Wiping cache...
Formatting /cache...
Cache wipe complete.
Please i need help on this

use odin 1.85 only and place PIT
make full ddlf2

LoLaTiOn said:
use odin 1.85 only and place PIT
make full ddlf2
Click to expand...
Click to collapse
The phone cant be recongized from any pc

Go to download mode, then only connect to usb. don't connect the usb before going to download mode. once you connect the usb, start odin and see if it is detected.
if not, then you will need to take the sdcard out and plug it in to laptop directly and then copy a new rom. use a rom that does a full wipe (DDLF2 or XXKPE) instead of a custom rom.
Also, try to fix permissions in recovery mode and see if that helps.

Can't go forward at "country select" on differents Rom. Need help please !

Hello
After solved issue to my problem : http://forum.xda-developers.com/mate-8/help/flash-configure-phone-country-selection-t3318172
I have the same problem by selecting country.
I have flashed TWRP recovery and root the phone. (with original rom)
I have downloaded differents rom ... no one is ok ... i'm stay on "select country" and i can't go "next". nothing when i click on "next". This issue is for differents rom...
I don't understand.
I have wipe data/system/cache/dalvik/cust ... always the same issue...
Thx for help

up

just try flash rom without wipe or formate
i did that to avoide setup screen

It work with dirty flash.
Thank's

Hello, im facing the same problem and i dont know how to resolve it, could you please help me . . And btw what do you mean by " Dirty Flash" ?

Ainzy said:
Hello, im facing the same problem and i dont know how to resolve it, could you please help me . . And btw what do you mean by " Dirty Flash" ?
Click to expand...
Click to collapse
go back to your working rom
then flash the rom you want without wiping any thing or factory reset from twrp

rowihel2012 said:
go back to your working rom
then flash the rom you want without wiping any thing or factory reset from twrp
Click to expand...
Click to collapse
Hello and sorry for my very bad english ...
What do you mean by " Go back to your working rom" because before that, i wiped all the data and like a di*k i forgot to backup first lol and now when i boot the phone im stuck in settings page
like where you need to set the languages, country ect... Looks like a bootloop. Sorry for being a noob T_T

Ainzy said:
Hello and sorry for my very bad english ...
What do you mean by " Go back to your working rom" because before that, i wiped all the data and like a di*k i forgot to backup first lol and now when i boot the phone im stuck in settings page
like where you need to set the languages, country ect... Looks like a bootloop. Sorry for being a noob T_T
Click to expand...
Click to collapse
download the rom you wanna flash with you pc
open the zip file and go to /system/app/HwStartupGuide and remove it from zip with winrar pc app
then but the rom in sd card and flash it with twrp recovery
will work fine :good:
the setup screen will be no longer appear with you and rom will work fine

rowihel2012 said:
download the rom you wanna flash with you pc
open the zip file and go to /system/app/HwStartupGuide and remove it from zip with winrar pc app
then but the rom in sd card and flash it with twrp recovery
will work fine :good:
the setup screen will be no longer appear with you and rom will work fine
Click to expand...
Click to collapse
I downloaded the rom from :
http://www.carbontesla.com/2016/02/download-huawei-mate-8-b152-marshmallow-update-emui-4-0-europe/
But there is no file such as /system/app/ect inside the zip.
Even with this one :
https://drive.google.com/file/d/0B5I_q70mNuR4SndZQ1JNSUJQX00/view?pref=2&pli=1
there is no /system/app/HwStartupGuide but just /system/app/wali/
What should i do ? thx for your help

Ainzy said:
I downloaded the rom from :
http://www.carbontesla.com/2016/02/download-huawei-mate-8-b152-marshmallow-update-emui-4-0-europe/
But there is no file such as /system/app/ect inside the zip.
Even with this one :
https://drive.google.com/file/d/0B5I_q70mNuR4SndZQ1JNSUJQX00/view?pref=2&pli=1
there is no /system/app/HwStartupGuide but just /system/app/wali/
What should i do ? thx for your help
Click to expand...
Click to collapse
searsh the zip file for HwStartupGuide and remove it

rowihel2012 said:
searsh the zip file for HwStartupGuide and remove it
Click to expand...
Click to collapse
Hello, now i'm facing a new problem. I can't flash any roms with Team Win Recovery Project Mate 8 v2.8.7.0 and TWRP by Rayglobe :
http://prnt.sc/a7cdah
Even with ADB Sideload i got an error, since im living in China and for any reason I don't know why i can't upload an image even with a VPN so, i will just write down what i see from my screen phone:
Uploading partition details...
...done
Full SELinux support is present.
MTP Enabled
Starting ADB sideload feature...
Installing '/sideload/package.zip' ...
Removing empty directorys...
Unpacking new files...
add link type file...
write radio image...
E:unknow command [errno]
script succeeded: result was [ ]
Formating Cache using make_ext4fs function.
Wiping Dalvik ache Directories...
-- Dalvik Cache Directories Wipe Complete!
Click to expand...
Click to collapse
Then from my PC with the platform tool, its load at 47% and then nothing. Im prett sure that my file is not corrupted or something like that, cause i downloaded like 4 times the file and from different server.
Do a NXT-L29 TWRP backup will resolve the issue ??

Ainzy said:
Hello, now i'm facing a new problem. I can't flash any roms with Team Win Recovery Project Mate 8 v2.8.7.0 and TWRP by Rayglobe :
http://prnt.sc/a7cdah
Even with ADB Sideload i got an error, since im living in China and for any reason I don't know why i can't upload an image even with a VPN so, i will just write down what i see from my screen phone:
Then from my PC with the platform tool, its load at 47% and then nothing. Im prett sure that my file is not corrupted or something like that, cause i downloaded like 4 times the file and from different server.
Do a NXT-L29 TWRP backup will resolve the issue ??
Click to expand...
Click to collapse
Use twrp v3

rowihel2012 said:
Use twrp v3
Click to expand...
Click to collapse
i used this one :
http://forum.xda-developers.com/mate-8/development/recovery-twrp-huawei-mate-8-t3298567
And i still got the same issue even in adb sideload or flash with TWRP V3
From ADB Sideload :
Unable to mount storage
Failed to mount 'data' (invalid argument)
Full Selinux supprt is present.
TeamWin Recovery 3.0.0.0
Unable to mount /data/media/TWRP/.twrps
Failed to mount '/data' (Invalid argument)
Failed to mount '/data' (Invalid argument)
Failed to mount '/data' (Invalid argument)
MTP Enabled
Failed to mount '/data' (Invalid argument)
Installing zip file'/sideload/package.zip'
Removing unneeded files...
Patching system files...
Remvoving empty directorys...
Unpacking new files...
add link tye file...
Write radio image...
E:unknow commad [errno]
script succeeded: result was [ ]
Formating Cache using make_ext4fs function.
Failed to mount '/data' (Invalid argument)
Failed to mount '/data' (Invalid argument)
Click to expand...
Click to collapse
And from TWRP when im trying to install the zip file:
Failed to mount '/data' (Invalid argument)
Unable to recreate /data/media/ folder.
Updating partition details...
Failed to mount 'data' (Invalid argument)
...done
Unable to mount storage
Failed to mount '/data' (Invalid agument)
Full SELinux supprt is present.
TeamWin Recovery 3.0.0.0
Unable to mount /data/media/TWRP/.twrps
Failed to mount '/data' (Invalid argument)
Failed to mount '/data' (Invalid argument)
Failed to mount '/data' (Invalid argument)
MTP Enabled
Failed to mount '/data' (Invalid argument)
Failed to mount '/data' (Invalid argument)
Failed to mount '/data' (Invalid argument)
Installing zip file '/external_sd/B152.zip'
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
zip file is corrupt!
error installing zip file '/external_sd/B152.zip'
updating partition details...
failed to mount '/data' (invalid argument)
...done
failed to mount '/data' (invalid argument)
Click to expand...
Click to collapse

You have to wipe /data. Then you don't have this issue. To wipe /data you have to write "yed" on the prompt

julien712 said:
You have to wipe /data. Then you don't have this issue. To wipe /data you have to write "yed" on the prompt
Click to expand...
Click to collapse
I already do that, and the problem is still there
Edit 1 : With any rom of NXT-L29, when im trying to flash with TWRP i always get this message :
"Skipping MD5 check: no MD5 file found"
Is that normal?

Ainzy said:
I already do that, and the problem is still there
Edit 1 : With any rom of NXT-L29, when im trying to flash with TWRP i always get this message :
"Skipping MD5 check: no MD5 file found"
Is that normal?
Click to expand...
Click to collapse
you have to formate data not wipe
yea this is normal no md5 found

rowihel2012 said:
you have to formate data not wipe
yea this is normal no md5 found
Click to expand...
Click to collapse
Hello, by wipe you mean in TWRP, select WIPE > Format Data and type "Yes".
If yes, i already did that like 10 times and i still got the same error when flashing or using adb sideload :crying::crying:
Edit 1: With any roms I downloaded its show me on my screen when flashing with Install>Select zip file then swipe to flash, the following message :
Updating partition details...
...done
Full SELinux is present.
Modify By Raimondo Martire
MTP Enabled
Installing zip file 'external/_sd/update.zip'
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
Zip file is corrupt!
Error installing zip file '/external_sd/update.zip'
Updating partition details...
...done
Click to expand...
Click to collapse
I really dont know where / what is the problem...

You can try to go back to stock rom with the rayglobes tool. Select "unbrick" section. It will flash all partitions to stock.

julien712 said:
You can try to go back to stock rom with the rayglobes tool. Select "unbrick" section. It will flash all partitions to stock.
Click to expand...
Click to collapse
Hello, i did what you tell me to do and the problem is still there i can't pass the bootloop in the settings page on the main menu :crying::crying:

What oO never saw that.
Fastboot mode doesnt works ?
Very strange because huawei reformat by this way... The only way to restore to stock.