Hey all:
While I consider myself quite technologically inclined, it appears that what I think and what reality is are quite different things. Thus, I look for advice from this wonderfully adept community (I've surfed around quite a bit, but I've never had to ask anything).
Here are my phone's specs:
Model: i9020A
Carrier: Koodo
The short story:
because, currently, there's only ICS for the GSM version of the phone, I thought I'd try flashing the GSM version of ICS onto my phone, then load the radio settings for my phone type so that it would work. It didn't. I was able to load ICS, and it worked great; the radio settings for the i9020A, however, didn't load up. As a result, I tried to reload the stock 2.3.6 onto the phone, and I seemed to have failed miserably.
I'm now at the following point:
Normal boot: only loads to the Google screen (with the padlock)
Fastboot Mode: here's the information.
Product Name - HERRING
HW Version - REV 16
Bootloader Version: I9020XXKL1
Baseband Version: I9020XXKI1
Carrier Info: ATT
Serial Number: 3935CEB394BE00EC
Lock State: Unlocked
When I select "Recovery," it briefly goes to the Google screen (with the unlocked padlock at the bottom), then loads into ClockworkMod Recovery v3.0.0.0
Here are the below options:
- reboot system now
- apply update from sdcard
- wipe data/factory reset
- wipe cache partition
- install zip from sd card
- backup and restore
- mounts and storage
- advanced
- GO BACK
Below these options is the following information:
ClockworkMod Recovery v3.0.0.0
E: Can't find misc
E: failed to find "cache" partition to mount at "/cache"
E: Can't mount /cache/recovery/command
E: Can't find misc
E: failed to find "cache" partition to mount at "/cache"
E: Can't mount /cache/recovery/log
E: Can't open /cache/recovery/log
E: failed to find "cache" partition to mount at "/cache"
E: Can't mount /cache/recovery/last_log
E: Can't open /cache/recovery/last_log
E: Can't find misc
E: failed to find "cache" partition to mount at "/cache"
Essentially, what I am asking is if there is anyway to load the original 2.3.6 for the i9020A on here. If I'm able, then I'll patiently wait for the ICS OTA.
Any help that anyone can provide would be immensely appreciated. If there's any other information I can provide, such as pictures, I'd be more than happy to provide that.
Thanks so much.
rcm8 said:
Hey all:
While I consider myself quite technologically inclined, it appears that what I think and what reality is are quite different things. Thus, I look for advice from this wonderfully adept community (I've surfed around quite a bit, but I've never had to ask anything).
Here are my phone's specs:
Model: i9020A
Carrier: Koodo
The short story:
because, currently, there's only ICS for the GSM version of the phone, I thought I'd try flashing the GSM version of ICS onto my phone, then load the radio settings for my phone type so that it would work. It didn't. I was able to load ICS, and it worked great; the radio settings for the i9020A, however, didn't load up. As a result, I tried to reload the stock 2.3.6 onto the phone, and I seemed to have failed miserably.
I'm now at the following point:
Normal boot: only loads to the Google screen (with the padlock)
Fastboot Mode: here's the information.
Product Name - HERRING
HW Version - REV 16
Bootloader Version: I9020XXKL1
Baseband Version: I9020XXKI1
Carrier Info: ATT
Serial Number: 3935CEB394BE00EC
Lock State: Unlocked
When I select "Recovery," it briefly goes to the Google screen (with the unlocked padlock at the bottom), then loads into ClockworkMod Recovery v3.0.0.0
Here are the below options:
- reboot system now
- apply update from sdcard
- wipe data/factory reset
- wipe cache partition
- install zip from sd card
- backup and restore
- mounts and storage
- advanced
- GO BACK
Below these options is the following information:
ClockworkMod Recovery v3.0.0.0
E: Can't find misc
E: failed to find "cache" partition to mount at "/cache"
E: Can't mount /cache/recovery/command
E: Can't find misc
E: failed to find "cache" partition to mount at "/cache"
E: Can't mount /cache/recovery/log
E: Can't open /cache/recovery/log
E: failed to find "cache" partition to mount at "/cache"
E: Can't mount /cache/recovery/last_log
E: Can't open /cache/recovery/last_log
E: Can't find misc
E: failed to find "cache" partition to mount at "/cache"
Essentially, what I am asking is if there is anyway to load the original 2.3.6 for the i9020A on here. If I'm able, then I'll patiently wait for the ICS OTA.
Any help that anyone can provide would be immensely appreciated. Thank you all kindly in advance.
Click to expand...
Click to collapse
Do you have a backup that you can restore? If not, grab the 2.3.6 update from here http://forum.xda-developers.com/showthread.php?t=1063664 and try a flesh install.
You should also flash a new radio, I didn't have any luck with the KI1 radio on my i9020a.
Not saying this will help at all but have you tried the latest version of clockwork mod your version seems to be very old. Try this one and see if it helps Clockwork 5.0.2.3
Thanks a ton for this. I'm a bit of a noob with this, so any other information, i.e., how to flash it properly, would be super helpful.
Again, thanks a bunch for the reply!
rcm8 said:
Thanks a ton for this. I'm a bit of a noob with this, so any other information, i.e., how to flash it properly, would be super helpful.
Again, thanks a bunch for the reply!
Click to expand...
Click to collapse
Download this LINK put it on your internal sd card boot up into recovery then do a full wipe in clockwork mod and flash the ROM it contains recovery, radio and bootloader. So you will be back to stock and can follow one of the guides on here to get back onto which every rom you choose.
Will do.
Thanks again!
FeaRThiS said:
Download this LINK put it on your internal sd card boot up into recovery then do a full wipe in clockwork mod and flash the ROM it contains recovery, radio and bootloader. So you will be back to stock and can follow one of the guides on here to get back onto which every rom you choose.
Click to expand...
Click to collapse
Okay, so I've downloaded the file, then put it onto the sd card.
I then boot into Fastboot Mode, then go to Recovery. I do the following here:
- wipe data/factory reset, then "Yes - delete all user data". It says the following:
-- Wiping data. . .
Formatting /data. . .
Formatting /cache. . .
E: format_volume: no MTD partition "cache"
Formatting /sd-ext. . .
Formatting /sdcard/.android_secure. . .
Data wipe complete.
E: failed to find "cache" partition mount at "/cache"
E: can't mount /cache/recovery/log
E: can't open /cache/recovery/log
E: failed to find "cache" partition to mount at "/cache"
E: can't mount /cache/recovery/last_log
E: can't open /cache/recovery/last_log
E: can't find misc
E: failed to find "cache" partition to mount at "/cache"
I then went into "advance" and "Wipe Dalvik Cache" (which works)
I also did "wipe cache partition," and it says the following:
-- Wiping cache
Formatting /cache
E: format_volume: no MTD partition "cache"
Cache wipe complete.
E: failed to find "cache" partition mount at "/cache"
E: can't mount /cache/recovery/log
E: can't open /cache/recovery/log
E: failed to find "cache" partition to mount at "/cache"
E: can't mount /cache/recovery/last_log
E: can't open /cache/recovery/last_log
E: can't find misc
E: failed to find "cache" partition to mount at "/cache"
I then went to "install zip from sd card," then "choose zip from sd card," then chose the file that you LINKED to (0b9c8148de0d.signed-sojua-ota-189904.0b9c814)
It says:
-- installing <the above file name>
E: can't find misc
Finding update package
Opening update package
Installing update. . .
then there's a bar, which never fills; it then goes to the following text:
assert failed: write_raw_image ("/tmp/boot.img","boot")
E: Error in /sdcard/<the file name from above>
(Status 7)
Installation aborted.
I'm pretty stuck. Anything else you might have would be fantastic!
Thanks again.
tehgeekguy said:
Do you have a backup that you can restore? If not, grab the 2.3.6 update from here http://forum.xda-developers.com/showthread.php?t=1063664 and try a flesh install.
You should also flash a new radio, I didn't have any luck with the KI1 radio on my i9020a.
Click to expand...
Click to collapse
Yeah, I tried flashing the original 2.3.6 from that page, but there's no luck . . . :S
Thanks for the reply, though! Do you recommend anything else?
rcm8 said:
Yeah, I tried flashing the original 2.3.6 from that page, but there's no luck . . . :S
Thanks for the reply, though! Do you recommend anything else?
Click to expand...
Click to collapse
What do you mean "no luck"? What error did you get? Did you get the right version?
If you're on a i9020A you should be using this one - http://goo.gl/nN0Zp (Official, signed, can flash with ClockworkMod or stock recovery. Contains recovery, radio and bootloader.)
rcm8 said:
Okay, so I've downloaded the file, then put it onto the sd card.
I then boot into Fastboot Mode, then go to Recovery. I do the following here:
- wipe data/factory reset, then "Yes - delete all user data". It says the following:
-- Wiping data. . .
Formatting /data. . .
Formatting /cache. . .
E: format_volume: no MTD partition "cache"
Formatting /sd-ext. . .
Formatting /sdcard/.android_secure. . .
Data wipe complete.
E: failed to find "cache" partition mount at "/cache"
E: can't mount /cache/recovery/log
E: can't open /cache/recovery/log
E: failed to find "cache" partition to mount at "/cache"
E: can't mount /cache/recovery/last_log
E: can't open /cache/recovery/last_log
E: can't find misc
E: failed to find "cache" partition to mount at "/cache"
I then went into "advance" and "Wipe Dalvik Cache" (which works)
I also did "wipe cache partition," and it says the following:
-- Wiping cache
Formatting /cache
E: format_volume: no MTD partition "cache"
Cache wipe complete.
E: failed to find "cache" partition mount at "/cache"
E: can't mount /cache/recovery/log
E: can't open /cache/recovery/log
E: failed to find "cache" partition to mount at "/cache"
E: can't mount /cache/recovery/last_log
E: can't open /cache/recovery/last_log
E: can't find misc
E: failed to find "cache" partition to mount at "/cache"
I then went to "install zip from sd card," then "choose zip from sd card," then chose the file that you LINKED to (0b9c8148de0d.signed-sojua-ota-189904.0b9c814)
It says:
-- installing <the above file name>
E: can't find misc
Finding update package
Opening update package
Installing update. . .
then there's a bar, which never fills; it then goes to the following text:
assert failed: write_raw_image ("/tmp/boot.img","boot")
E: Error in /sdcard/<the file name from above>
(Status 7)
Installation aborted.
I'm pretty stuck. Anything else you might have would be fantastic!
Thanks again.
Click to expand...
Click to collapse
Could be wrong but that looks like your partition tables got messed up at some point.
EDIT you could also try looking on here might be helpful LINK
EDIT X2 Other people have screwed up their partition tables and have fixed it using this guide LINK
tehgeekguy is right, if your model number is I9020A then it should work using the rom he linked, did you install Clockwork 5.0.2.3 before trying to install the stock 2.3.6 rom, if not then please try.
Yeah, that's the one I tried, but I received the same error message as before:
-- installing <the above file name>
E: can't find misc
Finding update package
Opening update package
Installing update. . .
then there's a bar, which never fills; it then goes to the following text:
assert failed: write_raw_image ("/tmp/boot.img","boot")
E: Error in /sdcard/<the file name from above>
(Status 7)
Installation aborted.
I'm going to try it one more time to see if I can't get it working. I have a feeling my partitions may have been messed up . . .
Thanks for the reply.
d.chatten said:
tehgeekguy is right, if your model number is I9020A then it should work using the rom he linked, did you install Clockwork 5.0.2.3 before trying to install the stock 2.3.6 rom, if not then please try.
Click to expand...
Click to collapse
Yeah, I'll be sure to try this right away.
Thanks a ton.
FeaRThiS said:
Could be wrong but that looks like your partition tables got messed up at some point.
EDIT you could also try looking on here might be helpful LINK
EDIT X2 Other people have screwed up their partition tables and have fixed it using this guide LINK
Click to expand...
Click to collapse
I'll definitely take a look at this. Thank a bunch!
The partitions is probably right, have you tried with the stock recovery instead of clockwork, worth a try.
d.chatten said:
tehgeekguy is right, if your model number is I9020A then it should work using the rom he linked, did you install Clockwork 5.0.2.3 before trying to install the stock 2.3.6 rom, if not then please try.
Click to expand...
Click to collapse
So, I went to the page and downloaded the following file:
"Option for no confirmation at all. Just flash in recovery.
signed-noconfirm.zip"
I put this onto the sd card, then attempted to install. This is what I received:
"-- Installing: /sdcard/signed-noconfirm.zip
E: Can't find misc
Finding update package . . .
Opening update package . . .
Installing update . . .
Installing .no_confirm
use at your own risk!!
reboot recovery and enjoy!
Install from sdcard complete"
Thus, it seemed to work pretty well. I thus rebooted recovery, but ClockworkMod is still showing that it's version V3.0.0.0.
Should I be flashing one of the other options on that page? If so, which one? And would you, by chance, have a detailed explanation as to how to go about doing that?
Thanks so much. I'm starting to feel like I won't be getting anywhere . . . . The responses have been awesome, though, everyone. I really appreciate it.
You have been trying to install a switch to turn off confirmations, to get Clockwork 5.0.2.3 installed you will need to use the same method as when you installed Clockwork 3.0.0.0 but use this image > 5023-cyan.img.
d.chatten said:
You have been trying to install a switch to turn off confirmations, to get Clockwork 5.0.2.3 installed you will need to use the same method as when you installed Clockwork 3.0.0.0 but use this image > 5023-cyan.img.
Click to expand...
Click to collapse
Makes a lot of sense. I'll try that.
Thanks.
d.chatten said:
You have been trying to install a switch to turn off confirmations, to get Clockwork 5.0.2.3 installed you will need to use the same method as when you installed Clockwork 3.0.0.0 but use this image > 5023-cyan.img.
Click to expand...
Click to collapse
Okay, so I flashed Clockwork 5.0.2.3, then I flashed the correct i9020A package. It worked beautifully.
Thanks a ton, everyone, for all your help. This is great!
Clad it worked for you.
Alright guys, I've got a question. I have my brothers nexus s that has had CM9 A11 on it and we decided to move to the latest CM9. Long story short, I am no longer able to boot the phone up, but can only access CWM Recovery and Bootloader/Fastboot mode. Trying to boot results in a bootloop. I need help getting this thing back to stock however I can. I've tried to flash recovery.img via fastboot but cannot get my computer to recognize the phone in order to do what I need. He would like his phone back ASAP and I hate to tell him its bricked for a few days. Thanks!
Download full OTA ROM from the link in my signature. Boot into CWM, mount USB storage, and transfer the file to SD card. Flash it. Done.
Just make sure you download the correct ROM for your phone model.
Sent from my Nexus S using xda premium
Video on that page will show you how to install drivers on a windows-based machine to recognise the phone for fastboot, and provide files to do so.
Also, can't you go into CWM --> mounts and storage --> mount usb storage (while plugged into the computer) then copy over any files you need, then flash through recovery.
I forgot to mention that I am getting this when trying to format cache:
E:Can't find misc
E:failed to find "cache" partition to mount at "/cache"
E:Can't mount /cache/recovery/command
E:Can't find misc
E:failed to find "cache" partition to mount at "/cache"
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/log
E:failed to find "cache" partition to mount at "/cache"
E:Can't mount /cache/recovery/latest_log
E:Can't open /cache/recovery/latest_log
E:Can't find misc
E:failed to find "cache" partition to mount at "/cache"
I tried to install the OTA update like you said but got the following:
assert failed: write_raw_image("/tmp/boot.img".
"boot")
E:Error in /sdcard/(OTA file name here)
(status 7)
Installation aborted.
Maybe the internal SD card is bad? Any thoughts?
When you get the drivers installed, download the latest 5.0.2.0 CWM from here.
Alright, so I got fastboot to recognize the phone, but am having another problem. It gave me an error when I gave the command to flash the new CWM. I tried to install pdanet for the drivers, and the phone says at the bottom "FASTBOOT STATUS - FAILInvalid Command". I really think something has been corrupted, any ideas on how to fix it/restore it? Thanks for all the help guys.
Fastboot status is not a command.
Fastboot devices is the command you use to test if it sees the device . The serial number will show.
uh oh sounds like someone flashed brickROM V1
Sent from my Nexus S 4G using XDA App. Developer of brickROM, and OP of XDA Thread of The Year 2011.
I flashed my ubislate 7c+ edge with the wrong recovery, and i believe it wiped all partitions.I have already tried every possible method found in any nook and corner of the internet.
I'm stuck in cwm recovery loop, it will boot to nothing but cwm recovery.
LiveSuite isnt working, i have like 4-5 images out of which atleast ONE of them must be the correct firmware(all of these i found on xda and the internet which was said that it would work) BUT none work since partitions are gone...
recovery says like cant mount system
cant mount emmc.... etc
Pheonix card doesnt work either, shows sprite error
I can make neither head nor tail of it.
Can anyone show me a way with which i could manually fix this tablet by either writing the partitions manually somehow or doing some magic trick(lol)? Please enlighten me.:crying::crying::crying:
bump
Edit : Hot news !!
After months of pure hopelessness ! I opened my back cover(for the 3rd time), moved the sticker and noted the board number(pcb number i guess?).
A sticker was covering it from being seen lol ! I noted it and googled the number.Found 3 firmwares for it. The first showed nothing in livesuit 1.07. Went till 3% and nothing happened. In livesuit 1.11 it showed x162 error(for a gazillionth time).I was hanging on the edge now. Had downloaded only 2 firmwares.
Tried the 2nd one and boom ! it went past 4% and i watched with glee as upgrade succeeded!! So my partition was wiped, but this managed to rewrite it.(Pats myself).
No datawind logo on boot. Everything works perfectly.
Link to working rom.I'll never try to upgrade this thing again lol .
NoobInToto said:
bump
Edit : Hot news !!
After months of pure hopelessness ! I opened my back cover(for the 3rd time), moved the sticker and noted the board number(pcb number i guess?).
A sticker was covering it from being seen lol ! I noted it and googled the number.Found 3 firmwares for it. The first showed nothing in livesuit 1.07. Went till 3% and nothing happened. In livesuit 1.11 it showed x162 error(for a gazillionth time).I was hanging on the edge now. Had downloaded only 2 firmwares.
Tried the 2nd one and boom ! it went past 4% and i watched with glee as upgrade succeeded!! So my partition was wiped, but this managed to rewrite it.(Pats myself).
No datawind logo on boot. Everything works perfectly.
Link to working rom.I'll never try to upgrade this thing again lol .
Click to expand...
Click to collapse
first procedure got error
*********************
CWM-based Recovery v
E:Can't mount /cache/recovery/command
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/log
E:Can't mount /cache/recovery/lost_log
E:Can't open /cache/recovery/lost_log
--- installation /sdcard/rom.zip
E:Can't mount /cache/recovery/last_install
E:Failed to open last_install: No such file or directory
second procedure got errors
******************************
UbiSlate 7c+ start only in recovery mode
and display following messages
CWM-based Recovery v6.o.1.2
E:Can't mount /cache/recovery/command
E:Can't mount /cache/recovery/log
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
trying to recover with recovering backup
it will display an error message like
Checking MD5 sums........
Erasing boot image...
Restoring system.......
E:format_volume: make_extf4fs failed on /dev/block/nandd
error while formatting system
is there any solutions for that
phonix card got error
aasifnasim said:
first procedure got error
*********************
CWM-based Recovery v
E:Can't mount /cache/recovery/command
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/log
E:Can't mount /cache/recovery/lost_log
E:Can't open /cache/recovery/lost_log
--- installation /sdcard/rom.zip
E:Can't mount /cache/recovery/last_install
E:Failed to open last_install: No such file or directory
second procedure got errors
******************************
UbiSlate 7c+ start only in recovery mode
and display following messages
CWM-based Recovery v6.o.1.2
E:Can't mount /cache/recovery/command
E:Can't mount /cache/recovery/log
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
trying to recover with recovering backup
it will display an error message like
Checking MD5 sums........
Erasing boot image...
Restoring system.......
E:format_volume: make_extf4fs failed on /dev/block/nandd
error while formatting system
is there any solutions for that
phonix card got error
Click to expand...
Click to collapse
Dude. You need to flash ROM via livesuit. Nothing else will work I promise.
Unzip that file and you will find the image to flash.
Good luck.
NoobInToto said:
Dude. You need to flash ROM via livesuit. Nothing else will work I promise.
Unzip that file and you will find the image to flash.
Good luck.
Click to expand...
Click to collapse
i also did that
but it goes upto 3% and gives and error after 3% update
aasifnasim said:
i also did that
but it goes upto 3% and gives and error after 3% update
Click to expand...
Click to collapse
What tablet do you have? Where is the camera located?
Dear Sir/Madam,
Greetings of the Day.
We regret any inconvenience caused.
This is to inform you that kindly share your contact no so that we can assist you further regarding the Service Center address.
Alternatively you can contact our support number at 18601800013.
Thank you so much for your patience and co-operation.
Regards,
DATAWIND INNOVATIONS.
Hello XDA community,
I am proposing this thread as a common knowledge base on
Rampant Nand Write Fail issue.
Having searched through numerous forums here & on Internet, i concluded no working solution on it.
Many have accepted fate of their devices - Dead .. and put them in storerooms.
For rest frantic people out there eating into *help me* lines , they will soon accept the same.
So, the purpose of this thread is to Analyze why did it happen, than to expect a Resurrection .
Having been a victim of NAND WRITE Fail, here are my Final thoughts :
Characteristics of problem :
1. BootLoop
2. Typical of Kitkat OS
3. Download mode available
4. Recovery mode unavailable
- flashes open-stomach android logo for split second , BootLoop again.
5. Happened in devices that initially did not come with KNOX,
but were upgraded to Kitkat with KNOX.
Observations :
1. Changing System / USB 2.0 port - did not solve.
2. Changing versions of ODIN - did not solve
3. Re-flashing of Stock 4.4.2 ROM - Failed [NAND Write Fail]
4. Flashing of older Stock ROMs - Failed [NAND Write Fail]
- also gathered info : You can not downgrade since Kitkat Bootloader wont allow.
5. With ONLY Download mode accessible,
- Not a single tar was successfully Flashed onto device.
- All recovery tar files fail to flash [NAND Write Fail]
Conclusion to Discuss with Experts :
1. Write to NAND memory is being blocked by something [Boot Loader ? ]
2. NAND memory itself is damaged.
- Unlikely seeing the wide scale of this problem.
3. Why is Download mode accessible,
and what causes a flash-second opening into Recovery mode... then Reboot.
4. What role has KNOX to play here [Trying to root tampered with WHAT PART OF KNOX Rule] ?
5. What do we know about bootloader in this context ?
thanks for opening this thread.
I have the same problem with my M480W.
However I am able to enter recovery mode, yet nothing works ...
Code:
E: failed to mount / system (Invalid argument)
can't mount '/system' (invalid argument)
E: failed to mount / system (Invalid argument)
E: File Open error '/cache/recovery/log'
E: can't open /cache/recovery/log
E: File Open error '/cache/recovery/last_log'
E: can't open /cache/recovery/last_log
E: File Open error '/cache/recovery/last_install;'
E: can't open /cache/recovery/last_install
I havent yet tried to repartition, cause I cannot find the correct pit file for my model.
Megatronicalite said:
thanks for opening this thread.
I have the same problem with my M480W.
However I am able to enter recovery mode, yet nothing works ...
Code:
E: failed to mount / system (Invalid argument)
can't mount '/system' (invalid argument)
E: failed to mount / system (Invalid argument)
E: File Open error '/cache/recovery/log'
E: can't open /cache/recovery/log
E: File Open error '/cache/recovery/last_log'
E: can't open /cache/recovery/last_log
E: File Open error '/cache/recovery/last_install;'
E: can't open /cache/recovery/last_install
I havent yet tried to repartition, cause I cannot find the correct pit file for my model.
Click to expand...
Click to collapse
PIT Has not solved this problem on any device i know...
Per my knowledge from various posts, they all ended up finally making it a 'Paper Weight' .
Has anyone found a solution?