i can't boot my device after moving the dalvik cache to the ext4 partition :/
this ONLY happens with jana's 3 & creed's 3.5 roms !!
a member at XDA told me that happened because both roms are based on DXKT7 !
anyhelp
I used that rom on DDKT3 and it was working perfectly after movind dalvik cache to sd-ext..
But little slow due to my low class sd card...
Try to install on ddkt3...
use Amarullz a2sdx it makes your partition your internal memory
it's the best ~~!!
$anket said:
I used that rom on DDKT3 and it was working perfectly after movind dalvik cache to sd-ext..
But little slow due to my low class sd card...
Try to install on ddkt3...
Click to expand...
Click to collapse
thanks for the help , i found that it's the only solution also
asad007 said:
use Amarullz a2sdx it makes your partition your internal memory
it's the best ~~!!
Click to expand...
Click to collapse
yes thanks i know it's good with the 2gb sd but with 8gb class 4 it lags alot and makes the phone very heavy
asad007 said:
use Amarullz a2sdx it makes your partition your internal memory
it's the best ~~!!
Click to expand...
Click to collapse
+1 dude..
Sent from my GT-S5670
Related
Guys, my andro always Stuck at ANDROID SCREEN
can you all help me how to install this ROM!!! http://forum.xda-developers.com/showthread.php?t=1448686
Model : Samsung Galaxy Fit GT-5670
Android Version : 2.3.4
Mod/Rom : CREED'S ROM V1.7.2 @801MHZ
did you clear data and cache?
heres d solution 2 ur problem...
http://forum.xda-developers.com/showthread.php?t=1448686&page=7
lomash said:
did you clear data and cache?
Click to expand...
Click to collapse
before or after i Flashing
Chirag219 said:
heres d solution 2 ur problem...
http://forum.xda-developers.com/showthread.php?t=1448686&page=7
Click to expand...
Click to collapse
can you tell me, Step by Step!. if Flasing is Succes i give you Thanks
Installation process fr non partitioned sd card.!
GhaffarZ said:
before or after i Flashing
can you tell me, Step by Step!. if Flasing is Succes i give you Thanks
Click to expand...
Click to collapse
Frst u need 2 partition ur sd card
2 do dat backup up ur sd card (backup is needed coz ur sd card will be formatted during partition process)
Den partition it in cwm.
fr partitioning -- in cwm go in advanced menu -select partition sd card den select patitioning size
select swapiness value. (64 or above)
ur sd will be partitioned.
after dis u need 2 in install d cm rom.
Installation Instruction:
-Download the rom
-Go to CWM Recovery
-Delete Data/Cache & also Format /system
-Select Install .zip from SD and choose CyanogenMediaMod.zip
-Delete Data/cache
-Wipe Dalvik Cache
-Reboot System
before and after
idk about this partition thing, i never tested cyanogen rom.
Dear frnds,
Had mentioned that a partitioned SD card is required.
However be careful.
Its a pain to remove the SD partition. Have to do it on windows.
So i suggest to keep the partition size to a minimum i.e 256 MB , cache size 0
Hey fvd23 cn u plz mntion d process 2 remove sd crd partition.??? .. will be thnkful 2 u!!
Chirag219 said:
Frst u need 2 partition ur sd card
2 do dat backup up ur sd card (backup is needed coz ur sd card will be formatted during partition process)
Den partition it in cwm.
fr partitioning -- in cwm go in advanced menu -select partition sd card den select patitioning size
select swapiness value. (64 or above)
ur sd will be partitioned.
after dis u need 2 in install d cm rom.
Installation Instruction:
-Download the rom
-Go to CWM Recovery
-Delete Data/Cache & also Format /system
-Select Install .zip from SD and choose CyanogenMediaMod.zip
-Delete Data/cache
-Wipe Dalvik Cache
-Reboot System
Click to expand...
Click to collapse
how many minutes whether I should wait??
fvd23 said:
Dear frnds,
Had mentioned that a partitioned SD card is required.
However be careful.
Its a pain to remove the SD partition. Have to do it on windows.
So i suggest to keep the partition size to a minimum i.e 256 MB , cache size 0
Click to expand...
Click to collapse
What the difference cache size 0 and 64 mb?
GhaffarZ said:
how many minutes whether I should wait??
Click to expand...
Click to collapse
After flashing wen u reboot in cyanogen(media)mod1.5 for d frst tym it will take around 4-5 mins.
Sent from my GT-S5670
Chirag219 said:
After flashing wen u reboot in cyanogen(media)mod1.5 for d frst tym it will take around 4-5 mins.
Sent from my GT-S5670
Click to expand...
Click to collapse
I have been waiting more than 10 minutes , what is wrong??
GhaffarZ said:
I have been waiting more than 10 minutes , what is wrong??
Click to expand...
Click to collapse
If ur sd card is partitiond nd its nt booting in cyanogen(media)mod 1.5 den u mst hve nt cleared dalvik cache or data as mntiond in d process
Sent from my GT-S5670
Chirag219 said:
If ur sd card is partitiond nd its nt booting in cyanogen(media)mod 1.5 den u mst hve nt cleared dalvik cache or data as mntiond in d process
Sent from my GT-S5670
Click to expand...
Click to collapse
yes i did, but always stuck at ANDROID Screen
Just one prob. why does it take so long to pass the ANDROID screen whenever i reboot???
Can that be fixed?
Sent from my BEAST using XDA App
amandeep152 said:
Just one prob. why does it take so long to pass the ANDROID screen whenever i reboot???
Can that be fixed?
Sent from my BEAST using XDA App
Click to expand...
Click to collapse
are you prob. like me??
Fr me also it was also taking too long to pass android screen. So i m back to creeds rom.
Sent from my GT-S5670
hey guyzz...
i found many posts discussing how to increase phone memory.....so here is the solution for it...
i found an app in the market to increase phone memory....
her is the link for that app...
https://market.android.com/details?id=com.seasmind.android.gmappmgr&hl=en
"THIS IS ONLY FOR ROOTED USERS".
I increased my space upto maximum extent.
"DONT FORGET TO PRESS THANKS IF I HELPED U"
It doesn't increase phone memory..
It frees up more internal memory..
they are two different things..
Sent from my GT-S5670 using XDA App
Aspire is right. Do anyone have instructions on how to configure S2E or A2SDGUI?
Aspire is right. Do anyone have instructions on how to configure S2E or A2SDGUI?
Click to expand...
Click to collapse
Yes do anyone have instruction how to use a2sd. And does theapplications working well on sd as in internal memory without any problem.
Sent from my GT-S5670 using xda premium
Cmiiw..
To use A2SD aka DarkTremor, you should set partition on your sdcard first.
You can do that via CWM Recovery..
But backup your Sdcard first, coz the partition process will wipe all of your data..
Ya its actually frees the internal memory.sry for my bad english
Sent from my GT-S5670 using XDA App
cygnus39 said:
Cmiiw..
To use A2SD aka DarkTremor, you should set partition on your sdcard first.
You can do that via CWM Recovery..
But backup your Sdcard first, coz the partition process will wipe all of your data..
Click to expand...
Click to collapse
I do not understand. What is it the first? FAT32 or ext4?
FAT32 is primary sd card format
ext4 is partitioned sd card format
cmiiw
Hi all..
I would like to know da procedure to move Application Data n Dalvik cache to my SD card.
I have
1.Shenqi V4.1 ROM
2.16gb class 6
3. 13gb FAT32, 500mb ext3 n remaining .swp
I have tried S2E but it doesn't move these two and only says reboot needed. Nothing changes after reboot!
I can use any other stable ROM if Shenqi doesn't support it but I looove this one.
Thanks in advance
Sent from my XT 1 Turbo
harleyhemant said:
Hi all..
I would like to know da procedure to move Application Data n Dalvik cache to my SD card.
I have
1.Shenqi V4.1 ROM
2.16gb class 6
3. 13gb FAT32, 500mb ext3 n remaining .swp
I have tried S2E but it doesn't move these two and only says reboot needed. Nothing changes after reboot!
I can use any other stable ROM if Shenqi doesn't support it but I looove this one.
Thanks in advance
Sent from my XT 1 Turbo
Click to expand...
Click to collapse
SOLVED!
S2E does a great job after the update
I have 256mb free space on my system memory!!
M lovin' it!!
Sent from my XT 1 Turbo
mind telling me how u solved it?
It's Rom specific meaning the ROM should support all the moving n swap.
I tried this on a Chinese version of Shenqi V4 (CM7) rom which you can find here.
http://forum.xda-developers.com/showthread.php?p=26044864
There is another dedicated S2E discussion goin on in the Android dev section here
http://forum.xda-developers.com/showthread.php?p=10671415
Sent from my XT 1 Turbo
Hi harleyhemant,
I am currently using Bravo2.2 installed with lin2sd. Though I have my SD card partitioned as ext4 I am not able to mount it in lin2sd as it says failed to load script. Have you faced any similar problems before?
krishn said:
Hi harleyhemant,
I am currently using Bravo2.2 installed with lin2sd. Though I have my SD card partitioned as ext4 I am not able to mount it in lin2sd as it says failed to load script. Have you faced any similar problems before?
Click to expand...
Click to collapse
I had this with CronosX. I solved with this : http://forum.xda-developers.com/showthread.php?t=1713478
I have tried the INT2EXT+ for CM10 as well as Mount2sd for increasing internal memory in the new CM10 Build 3 but non seems to be working.I have everything i.e. Busy box as well as init.d support which is required for Mount2SD but every time I flash it, it gets stuck on the HTC logo.And, INT2EXT+ isn't working as well.The phone does boot properply in INT2EXT+ but doesn't show any increase in memory.
Do you have an EXT partition on your SD card?
SifJar said:
Do you have an EXT partition on your SD card?
Click to expand...
Click to collapse
Yes I do.Should I try re-partitioning it and make partition again and than try Mount2SD again? Not only me few others are also having problems in increasing the internal memory in CM10 beta 3
I'd say you maybe should try formatting the card again in recovery and making ext partition while doing so, in case there is a problem with your partition. It's probably something else entirely, but may as well completely eliminate this option. (Of course, doing this will wipe everything from your SD card; back it up first).
M2SD working like awsome
M2Sd working like awsome in my Cm10beta3 as well as CM9.1build11 nothing seems to be lag...
which m2sd u followed and how u make a partition on ur sd card..?
Lay_13591 said:
I have tried the INT2EXT+ for CM10 as well as Mount2sd for increasing internal memory in the new CM10 Build 3 but non seems to be working.I have everything i.e. Busy box as well as init.d support which is required for Mount2SD but every time I flash it, it gets stuck on the HTC logo.And, INT2EXT+ isn't working as well.The phone does boot properply in INT2EXT+ but doesn't show any increase in memory.
Click to expand...
Click to collapse
hey i'm also on cm10 beta 3, and tried flashing int2ext zip from recovery but it doesnt work ssays process aborted after a while...so i extracted my zip file in pc itself and copied 40int2ext file located in system/etc/init.din the Zip to same location in phone's system and then reboot normally...worked for me
The ROM with the script....
Go here : http://www.mediafire.com/?w5hbhl9795syl0s
The file is the Cyanogenmod 10 beta #3 by liverpool-fan.
I got permission from him and have also posted in my blog, along with installation details.
,,,,
try using Yannou's recovery instead of CWM......CWM has problems with mounting sd partition...
had same problem..........worked for me.... :fingers-crossed:
hit thanks if i helped :good:
this should work
Lay_13591 said:
Yes I do.Should I try re-partitioning it and make partition again and than try Mount2SD again? Not only me few others are also having problems in increasing the internal memory in CM10 beta 3
Click to expand...
Click to collapse
try using Ungaze script.. it worked for me.. http://forum.xda-developers.com/showthread.php?t=1874121
Sorry for bad english and thanx...
after rooting i flashed cm10 first time...while i did sdcard partition in recovery as ext-1gb,
swap-0...
in cm10 all my system and user apps got installed in sd-ext...thus my device worked smooth and charm without lag and no insufficient memory problems...
after i flashed "sense5" by hibgills...that time i didnot make the sd-card partition in recovery but did all wipes...
now my apps getting installed on internal memory...and storage showing only 30mb free for internal,device showing only 7gb out of 8gb...and i cant use my sd-ext ....
what to do...? to use my sd-ext of 1gb...
[email protected] explorer said:
Sorry for bad english and thanx...
after rooting i flashed cm10 first time...while i did sdcard partition in recovery as ext-1gb,
swap-0...
in cm10 all my system and user apps got installed in sd-ext...thus my device worked smooth and charm without lag and no insufficient memory problems...
after i flashed "sense5" by hibgills...that time i didnot make the sd-card partition in recovery but did all wipes...
now my apps getting installed on internal memory...and storage showing only 30mb free for internal,device showing only 7gb out of 8gb...and i cant use my sd-ext ....
what to do...? to use my sd-ext of 1gb...
Click to expand...
Click to collapse
say clearly what's ur problem man... u wont create sd partition or sdext partition???
NAVidua all
dinesam said:
say clearly what's ur problem man... u wont create sd partition or sdext partition???
Click to expand...
Click to collapse
i created sdext for old custom rom.....but i didn't for new sense 5 rom....
now how to use that sdext ?..as my internal memory is getting low.
see all rom had same SDEXT partition, required minim 1gb EXT3.
so just reinstall the Rom, before u create SDext using recovery as ext3 ...