How to install [MOD][ROM]Cyanogen(Media)Mod v1.5 - Samsung Galaxy Fit GT 5670

Guys, my andro always Stuck at ANDROID SCREEN
can you all help me how to install this ROM!!! http://forum.xda-developers.com/showthread.php?t=1448686
Model : Samsung Galaxy Fit GT-5670
Android Version : 2.3.4
Mod/Rom : CREED'S ROM V1.7.2 @801MHZ

did you clear data and cache?

heres d solution 2 ur problem...
http://forum.xda-developers.com/showthread.php?t=1448686&page=7

lomash said:
did you clear data and cache?
Click to expand...
Click to collapse
before or after i Flashing
Chirag219 said:
heres d solution 2 ur problem...
http://forum.xda-developers.com/showthread.php?t=1448686&page=7
Click to expand...
Click to collapse
can you tell me, Step by Step!. if Flasing is Succes i give you Thanks

Installation process fr non partitioned sd card.!
GhaffarZ said:
before or after i Flashing
can you tell me, Step by Step!. if Flasing is Succes i give you Thanks
Click to expand...
Click to collapse
Frst u need 2 partition ur sd card
2 do dat backup up ur sd card (backup is needed coz ur sd card will be formatted during partition process)
Den partition it in cwm.
fr partitioning -- in cwm go in advanced menu -select partition sd card den select patitioning size
select swapiness value. (64 or above)
ur sd will be partitioned.
after dis u need 2 in install d cm rom.
Installation Instruction:
-Download the rom
-Go to CWM Recovery
-Delete Data/Cache & also Format /system
-Select Install .zip from SD and choose CyanogenMediaMod.zip
-Delete Data/cache
-Wipe Dalvik Cache
-Reboot System

before and after
idk about this partition thing, i never tested cyanogen rom.

Dear frnds,
Had mentioned that a partitioned SD card is required.
However be careful.
Its a pain to remove the SD partition. Have to do it on windows.
So i suggest to keep the partition size to a minimum i.e 256 MB , cache size 0

Hey fvd23 cn u plz mntion d process 2 remove sd crd partition.??? .. will be thnkful 2 u!!

Chirag219 said:
Frst u need 2 partition ur sd card
2 do dat backup up ur sd card (backup is needed coz ur sd card will be formatted during partition process)
Den partition it in cwm.
fr partitioning -- in cwm go in advanced menu -select partition sd card den select patitioning size
select swapiness value. (64 or above)
ur sd will be partitioned.
after dis u need 2 in install d cm rom.
Installation Instruction:
-Download the rom
-Go to CWM Recovery
-Delete Data/Cache & also Format /system
-Select Install .zip from SD and choose CyanogenMediaMod.zip
-Delete Data/cache
-Wipe Dalvik Cache
-Reboot System
Click to expand...
Click to collapse
how many minutes whether I should wait??

fvd23 said:
Dear frnds,
Had mentioned that a partitioned SD card is required.
However be careful.
Its a pain to remove the SD partition. Have to do it on windows.
So i suggest to keep the partition size to a minimum i.e 256 MB , cache size 0
Click to expand...
Click to collapse
What the difference cache size 0 and 64 mb?

GhaffarZ said:
how many minutes whether I should wait??
Click to expand...
Click to collapse
After flashing wen u reboot in cyanogen(media)mod1.5 for d frst tym it will take around 4-5 mins.
Sent from my GT-S5670

Chirag219 said:
After flashing wen u reboot in cyanogen(media)mod1.5 for d frst tym it will take around 4-5 mins.
Sent from my GT-S5670
Click to expand...
Click to collapse
I have been waiting more than 10 minutes , what is wrong??

GhaffarZ said:
I have been waiting more than 10 minutes , what is wrong??
Click to expand...
Click to collapse
If ur sd card is partitiond nd its nt booting in cyanogen(media)mod 1.5 den u mst hve nt cleared dalvik cache or data as mntiond in d process
Sent from my GT-S5670

Chirag219 said:
If ur sd card is partitiond nd its nt booting in cyanogen(media)mod 1.5 den u mst hve nt cleared dalvik cache or data as mntiond in d process
Sent from my GT-S5670
Click to expand...
Click to collapse
yes i did, but always stuck at ANDROID Screen

Just one prob. why does it take so long to pass the ANDROID screen whenever i reboot???
Can that be fixed?
Sent from my BEAST using XDA App

amandeep152 said:
Just one prob. why does it take so long to pass the ANDROID screen whenever i reboot???
Can that be fixed?
Sent from my BEAST using XDA App
Click to expand...
Click to collapse
are you prob. like me??

Fr me also it was also taking too long to pass android screen. So i m back to creeds rom.
Sent from my GT-S5670

Related

help with darktremor a2sd

i really don kno how to use the a2sd on fitdroid v2.0
can someone plz help?
Dude, ull first have partition your sd card. Then only u can use darktremor apps to sd. To partion your sd card, go to recovery mod>advanced>partition>and then select the size of partition. Atleast 512mb of partition is recommended.
After doing that,reboot ur phone and now a2sd should work without any issues!
Feel free to ask if u still have any problem
sent from my galaxy fit + CM7 using xda premium app
try help
alaric.m said:
i really don kno how to use the a2sd on fitdroid v2.0
can someone plz help?
Click to expand...
Click to collapse
maybe this coud help you
IF U WANT DARKTREMOR A2SD TO WORK THEN U HAVE TO PARTITION UR SDCARD.
TO PARTITION FIRST TAKE BACKUP OF UR SDCARD AS IT NEEDS TO FORMAT UR CARD WHICH WILL ERASE ALL UR SD CONTENT.
IN CWM MENU GOTO ADVANCED MENU.
SELECT PARTITION SDCARD.
SELECT SIZE U WISH(512 or above) AND SELECT 62 or above AS SWAP VALUE.
WAIT FOR SOME TIME AND RESTART UR DEVICE....
TO CHECK A2SD WORKING OR NOT GOTO APP DRAWER MENU AND OPEN A2SDGUI APP AND CHECK APPS ARE ON SD IS ENABLED....
if it is active, you can move the Dalvik cache to sd card by selecting the Dalvik cache on SD-EXT and press Move button and reboot phone
sory for my language
tried that, did not work
Bhocan said:
maybe this coud help you
IF U WANT DARKTREMOR A2SD TO WORK THEN U HAVE TO PARTITION UR SDCARD.
TO PARTITION FIRST TAKE BACKUP OF UR SDCARD AS IT NEEDS TO FORMAT UR CARD WHICH WILL ERASE ALL UR SD CONTENT.
IN CWM MENU GOTO ADVANCED MENU.
SELECT PARTITION SDCARD.
SELECT SIZE U WISH(512 or above) AND SELECT 62 or above AS SWAP VALUE.
WAIT FOR SOME TIME AND RESTART UR DEVICE....
TO CHECK A2SD WORKING OR NOT GOTO APP DRAWER MENU AND OPEN A2SDGUI APP AND CHECK APPS ARE ON SD IS ENABLED....
if it is active, you can move the Dalvik cache to sd card by selecting the Dalvik cache on SD-EXT and press Move button and reboot phone
sory for my language
Click to expand...
Click to collapse
hi, i tried all of this as you mentioned...
eventually, this darktremor a2sd stopped my apps from being moved at all and it kept on saying that i don't have enough memory... though i know i should have... any thoughts??
Okay, a question from me...
Is it possible to have this swap setup in the stock gingerbread rom (ddkq5)???
Can anybody give a step-by-step tutorial, or maybe just a link, along with a list of all the necessary apps/other stuff that will be needed..??
I have a 16gb memory card in my galaxy fit...
Sent from my GT-S5670 using XDA App
I run Creed´s ROM 1.5 and there is also Darktremor included.
I thought SD was automatical formatted with ext4 by installing it. So I am a little puzzled to see, that moving to SD does not work as well as swap option.
Could you tell me, what is the matter?^^
Edit: Found out by my own, followed the same steps as mentioned above for FITDroid. Works on Creed´s ROM 1.5 as well. Only Disadvantage I found was it reduces my 8GB SD to 4096MB (couldn´t select higher at CWM) also after moving Dalvik, system boot seems to loop .. had to recover (good I did before )

[Q] any1 knw hw to fix dalvik-cache mv 2 sd in creedsv2

hey guys i am new i really want to know if some one can fix r there's way to fix problem i.e
in creeds rom v2 dalvik-cache move to sd dont work i m stuck on boot loop for hours n i need a solution as in v1.7.2 i had 125 apps now i cant even install 50 of them....plz help.
maybe there's no ext4 partition?
no coz in v1.7.2 i made partition and of 512mb and moved dalvik-cache to sd and 64mb swap but a2sd is working well in v2 jus the move to sd function is not working as described by mr.creedo himself in the thread...n m still using v1.7.2 with sd-ext...
i think its coz of either rom or the kernel coz v2 is based on cmptly new firmware but in v.1.7.2 it is giving no such problem.
try link2sd...
Dalvik cache to sd is not working for now.Even i tried to do so but it din't work and i had to reflash. May be creed will come up with a solution
i have been studying android in deep and i think these steps might help via link2sd
and FAT2 partition
http://forum.xda-developers.com/showthread.php?t=919326
i will try and let you guyz know if its of any use...!!
arhant said:
i have been studying android in deep and i think these steps might help via link2sd
and FAT2 partition
http://forum.xda-developers.com/showthread.php?t=919326
i will try and let you guyz know if its of any use...!!
Click to expand...
Click to collapse
lol, I already told use link2sd...works for me in every rom so far...even cm9...
but its a good thing that you tried to research a little...keep it up...
a.cid said:
lol, I already told use link2sd...works for me in every rom so far...even cm9...
but its a good thing that you tried to research a little...keep it up...
Click to expand...
Click to collapse
hey its wierd..i made a secondary FAT32 partition using minitools and then flash v2 n try to link my secondary drive but wenever i choose fat32 its shows error then i noticed that this rom automatically changes fat32 to ext3 wenever i insert sd card though i was able to mount my ext3 using link2sd but wen i link dalvik-cache it shows no dalvik-cache..!!
how's dat possible....is it something wrong with rom??
thnx anyway
i was searching a more n i found this thread
http://forum.xda-developers.com/showthread.php?t=1042828
data2sd but it is under development...btw it can be use if made for fit..
arhant said:
i was searching a more n i found this thread
http://forum.xda-developers.com/showthread.php?t=1042828
data2sd but it is under development...btw it can be use if made for fit..
Click to expand...
Click to collapse
ya that is ungaze script...already implemented in cm7.2 rc5.5 by asad007
I haven't tried partition tool...I partitioned via cwm...
and your secondary partition should be ext2/3, not fat32...
I partitioned ext 4 via windows. Putted ungaze script. Working . Same benchmark as without script. I am on rc 5,5
Sent from my GT-S5670 using Tapatalk
djozaa said:
I partitioned ext 4 via windows. Putted ungaze script. Working . Same benchmark as without script. I am on rc 5,5
Sent from my GT-S5670 using Tapatalk
Click to expand...
Click to collapse
will this move dalvik-cache to sd...if yes
plz give me download link!!!thnx
a.cid said:
ya that is ungaze script...already implemented in cm7.2 rc5.5 by asad007
I haven't tried partition tool...I partitioned via cwm...
and your secondary partition should be ext2/3, not fat32...
Click to expand...
Click to collapse
hey will this method work in any rom r jus in cm7.2 rc5.5....n will this move dalvik-cache to sd....
\?
http://forum.xda-developers.com/showthread.php?t=1042828
Please read instructions and do backup before
Sent from my GT-S5670 using Tapatalk
arhant said:
will this move dalvik-cache to sd...if yes
plz give me download link!!!thnx
Click to expand...
Click to collapse
Yes. Post above is link
Sent from my GT-S5670 using Tapatalk
djozaa said:
http://forum.xda-developers.com/showthread.php?t=1042828
Please read instructions and do backup before
Sent from my GT-S5670 using Tapatalk
Click to expand...
Click to collapse
Het guys please becarefull about the partition thing..
Because its very risky and you better have backup of your sdcard ane save that backups at your PC or notebook..
Some of my friends has been loosing all of his data because of it.
When u first time partitioning sd card, it will remove all your sd card stuff ofcourse. Just put it on desktop and move back when partition is done.
Sent from my GT-S5670 using Tapatalk
a.cid said:
try link2sd...
Click to expand...
Click to collapse
hey thnx ..it wrks n i have 134mb free...
Enter Recovery Mode by holding POWER + HOME;
With the Volume Down key (-) and High Volume (+) and navigate to the HOME key Select "advanced";
Select "partition SD Card"
In the next window you should choose the partition size.
If you have a 2GB card to advise you put 512mb 1024mb,
If you have a card with 4GB or 8GB advise putting 2048mb.
And finally select the size of the swap partition for extra memory.
If you have an urge to put 2gb card 128mb,
If you have a card with 4GB or 8GB advise putting 256mb.
enter the Market and install the program Links2SD
to open the program you should choose ext3 and press ok> then superuser permission> and after that restart your phone.
Now press the Options button to display the sub-menu of the program
Made this to take and check the settings, and automatically link-site check in'' automatically''.
Now press the Options button to display the sub-menu of the program.
Made this to take and check the settings, and automatically link-site check in'' automatically''.
Return to initial screen of the program, press the Options button to display the sub-menu and then click multiple selection, press the shutter button and select options select all, press again press the options button and click Actions, and click Create link. Press OK to start, and all your applications ready to go to memory that was created ext3.
Now we will install and configure the Swapper. Lower application, install the application by the Market, after check the Active on Boot Swap on Swap File Position sure "EXT Partition SD Card" in "Swap File Size" set a value as the size of the partition created in ext, I suggest that is a partition of 1024 put 250 if a partition of 2048 put 512 of superuser permissions and restart the phone.
And finally select the size of the swap partition for extra memory.
If you have an urge to put 2gb card 128mb,
If you have a card with 4GB or 8GB advise putting 256mb.
Now we will install and configure the Swapper. Lower application, install the application by the Market, after check the Active on Boot Swap on Swap File Position sure "EXT Partition SD Card" in "Swap File Size" set a value as the size of the partition created in ext, I suggest that is a partition of 1024 put 250 if a partition of 2048 put 512 of superuser permissions and restart the phone.
Click to expand...
Click to collapse
I wouldn't recommend swapper...
long story short, it'll start affecting performance...and do more bad than good...
swap partition is basically virtual ram...but the problem with this is, our phones ram is fast, while even the best of sd cards can't match that...
so you may get better performance initially, but soon you'll regret having a swap partition...

[Q] Help Me to Use Data2Ext in IcySnap v1.6 ROM (neko 95's ROM)

Hi....... :fingers-crossed:
​
I guess everyone here have known about the Great ROM called ICY SNAP (thanks to Neko for that such great ROM ). :good:
But i miss the tutorial how to use the Data2ext Feature on it ?
First of all.. Before using a data2ext we should have a partition on our SD-Card, isn'it ?
So that we can use that partition to use the Data2ext and move our app/data.​
My question is :
1. How to create a Partition on my SD-Card with the safest way.
2. And after we create it, what should we do next ?
3. I read from the Icy Snap Thread notice, we may activate the Data2ext via Terminal Emulator Command. And after i do the 2 step above, may i just activate it through it ?​
Thanks in Advance for your great Help and Answers. :victory: :angel: ​
Boot in recovery mode. Now select "Partition sd card", Next select Partition sd then set swap size= min 64MB(recommended by neko), Set ext-size= As you want and confirm thats it.
But backup your sd card before bpartitioning since it will be formatted during the process.
ashishv said:
Boot in recovery mode. Now select "Partition sd card", Next select Partition sd then set swap size= min 64MB(recommended by neko), Set ext-size= As you want and confirm thats it.
But backup your sd card before bpartitioning since it will be formatted during the process.
Click to expand...
Click to collapse
I use the 8GB SD-Card.
Can you tell me how much the recommended swap size and ext-size ?
I read from many other thread.
There are so many different method that consfusing me.
They talking about the ext2, ext3, ext4.. FAT format. Bla bla bla.
Should i've to notice about it as well in this method ?
sent from my Rusty Pan
just4bimo said:
I use the 8GB SD-Card.
Can you tell me how much the recommended swap size and ext-size ?
I read from many other thread.
There are so many different method that consfusing me.
They talking about the ext2, ext3, ext4.. FAT format. Bla bla bla.
Should i've to notice about it as well in this method ?
sent from my Rusty Pan
Click to expand...
Click to collapse
I use 768mb ext 4 and 0 mb swap.Partitioned with amonra recovery and then disabled journaling.
ashishv said:
I use 768mb ext 4 and 0 mb swap.Partitioned with amonra recovery and then disabled journaling.
Click to expand...
Click to collapse
I have partitioned 1.9 GB Ext 3 on sdcard 8 gb, is that ok for icysnap 1.6? (I'm FINALLY getting my phone tomorrow:victory
Just partition sd card frm any recovery nd then switch on ur cell then open terminal emulator in that type su nd then press enter then type d2ext then again type enter.. then it will ask fr reboot required. Then juz restart ur cell.. nd u have done juz check ur storage in settings.. it vil show u increased internal storage... if any question ask me.... i vl definately help u.....
Sent from my LG-P500 using xda app-developers app
after partitioning sd card you need to do in android terminal a data2sd enable and a zipalign ( as neko provided in instructions ), after reboot I got 450mb free space on internal memory
maheshpatole said:
Just partition sd card frm any recovery nd then switch on ur cell then open terminal emulator in that type su nd then press enter then type d2ext then again type enter.. then it will ask fr reboot required. Then juz restart ur cell.. nd u have done juz check ur storage in settings.. it vil show u increased internal storage... if any question ask me.... i vl definately help u.....
Sent from my LG-P500 using xda app-developers app
Click to expand...
Click to collapse
grigtm said:
after partitioning sd card you need to do in android terminal a data2sd enable and a zipalign ( as neko provided in instructions ), after reboot I got 450mb free space on internal memory
Click to expand...
Click to collapse
Thx for you both to answer my question.
I will try to do this as soon as possible.
Before do this. I don't have to wipe anything on my system, do i ?
And after partitioning i don't have to reflash the rom as weel ?
sent from my Rusty Pan
just4bimo said:
Thx for you both to answer my question.
I will try to do this as soon as possible.
Before do this. I don't have to wipe anything on my system, do i ?
And after partitioning i don't have to reflash the rom as weel ?
sent from my Rusty Pan
Click to expand...
Click to collapse
first of all do a sd card partition, that will wipe sd card so u will loose all data from sd, after this recover your saved data back to sd from where did u saved it, after this do the android terminal comands and reboot, now it is done, noting will happened to system
were u able to get thruogh this
I am getting bootloop after reboot after d2ext .

[Q] Partition sd help !

I am new here so don't judge me.
I want more space for my phone to storage more apps. I watched a video wich showed how to partition using rom manager. I did everything right, but when i reboot into recovery i do not have the option "partition sd" i only have like 4 options : instal from sd, wipe cache, factory reset and reboot.
What should I do? Thanks
RobertBoykins said:
I am new here so don't judge me.
I want more space for my phone to storage more apps. I watched a video wich showed how to partition using rom manager. I did everything right, but when i reboot into recovery i do not have the option "partition sd" i only have like 4 options : instal from sd, wipe cache, factory reset and reboot.
What should I do? Thanks
Click to expand...
Click to collapse
You are lucky that rom manager did nt hard brick your phone..
NEVER EVER USE ROM MANAGER!!
flash another ROM or u'll have to flash ODIN again with stock rom and then install another ROM.
Hope ua Fit gets FIT again..
RobertBoykins said:
I am new here so don't judge me.
I want more space for my phone to storage more apps. I watched a video wich showed how to partition using rom manager. I did everything right, but when i reboot into recovery i do not have the option "partition sd" i only have like 4 options : instal from sd, wipe cache, factory reset and reboot.
What should I do? Thanks
Click to expand...
Click to collapse
You may partition SD with CWM (Clockworkmod Recovery). Make primary partition FAT32 and primary partition ext2, 3 or 4. The best ext4.
You may SD partition and with MiniTool Partition Wizard Home Edition. Download and install this application.
Tutorial:
http://forum.xda-developers.com/wiki/index.php?title=SD_card_partitioning
Connect your phone Galaxy Fit with PC, and open MiniTool partition Wizard Home Edition.
Rohit02 said:
You are lucky that rom manager did nt hard brick your phone..
NEVER EVER USE ROM MANAGER!!
flash another ROM or u'll have to flash ODIN again with stock rom and then install another ROM.
Hope ua Fit gets FIT again..
Click to expand...
Click to collapse
ha ha ha rightly said...bro. He had a close escape from ROM MANAGER.
Rohit02 said:
You are lucky that rom manager did nt hard brick your phone..
NEVER EVER USE ROM MANAGER!!
flash another ROM or u'll have to flash ODIN again with stock rom and then install another ROM.
Hope ua Fit gets FIT again..
Click to expand...
Click to collapse
Cant mount sd card as ext4. can anyone help? In recovery when i want to wipe data it shows sd ext mount fails. Help please
Sent from my GT-5670 using Tapatalk 2

Partition Problem

Hey dev , App2sd script doesnt work .Problem is this !!
I flashed custom rom for pico once,my sd card was slow [class 4].I bought a new one [class 10],everything was working fine .
My rom was slow ,defras said to create partition with 0 swap ,i thought that was a problem ,so to start fresh I messed up with my card for my computer .I deleted partition from windows manage-> storage services ,but i was unable to create new partition from there ,so i downloaded EaseUS partition manager ,i managed to recover partition but after dat I have created/Deleted partition many times but app2sd scripts never works on my phone now ,,partitions are ok ,rom boots up but script doesnt work.
Help me out please.
Card Info - Sandisk 8 GB Class 10
Partition - ext3 500 mb . [tried 1 GB also,didnt worked]
gauravsaini964 said:
Hey dev , App2sd script doesnt work .Problem is this !!
I flashed custom rom for pico once,my sd card was slow [class 4].I bought a new one [class 10],everything was working fine .
My rom was slow ,defras said to create partition with 0 swap ,i thought that was a problem ,so to start fresh I messed up with my card for my computer .I deleted partition from windows manage-> storage services ,but i was unable to create new partition from there ,so i downloaded EaseUS partition manager ,i managed to recover partition but after dat I have created/Deleted partition many times but app2sd scripts never works on my phone now ,,partitions are ok ,rom boots up but script doesnt work.
Help me out please.
Card Info - Sandisk 8 GB Class 10
Partition - ext3 500 mb . [tried 1 GB also,didnt worked]
Click to expand...
Click to collapse
Try to mount the second partition with link2sd app...
Ps- mod plz move this thread
Sent from my HTC Explorer using xda app-developers app
Saumitra Yadav said:
Try to mount the second partition with link2sd app...
Ps- mod plz move this thread
Sent from my HTC Explorer using xda app-developers app
Click to expand...
Click to collapse
Link2sd ask for which typ of partition i have ,,when i select type of partition .currently ex2 ,it says partition either do not exist or not supported by the device [something like that].
gauravsaini964 said:
Link2sd ask for which typ of partition i have ,,when i select type of partition .currently ex2 ,it says partition either do not exist or not supported by the device [something like that].
Click to expand...
Click to collapse
Create a partition through yannou recovery(cwm) 1gb or 512mb .
1. Reboot into recovery.
2. Goto Advanced>partition sd card> select swap as 0 mb and partition size as you want
3. Once completed. Reboot and select ext3 in link2sd :thumbup:
Sent from my HTC Explorer using xda app-developers app
Saumitra Yadav said:
Create a partition through yannou recovery(cwm) 1gb or 512mb .
1. Reboot into recovery.
2. Goto Advanced>partition sd card> select swap as 0 mb and partition size as you want
3. Once completed. Reboot and select ext3 in link2sd :thumbup:
Sent from my HTC Explorer using xda app-developers app
Click to expand...
Click to collapse
U aint understanding ,I already have partition on which my rom is installed.App2sd script isnt working neither link2sd etc.
gauravsaini964 said:
U aint understanding ,I already have partition on which my rom is installed.App2sd script isnt working neither link2sd etc.
Click to expand...
Click to collapse
hope this helps
http://forum.xda-developers.com/showthread.php?t=2087762
Maybe you didn't partition your SD card right. Boot your phone without your memory card. If the ROM boots up okay and the ROM is working properly with almost everything present, the problem is with your SD card. Format it and partition it using Yannou's recovery.
I'm not responsible if anything worse happens to your phone.

Categories

Resources