I am running 1.73 and would like to try the clean 2.03 aosp romantic with sense. I know if I go to 1.85 I can't do it so my question is what do I need to do to be able to run that romantic on my phone?
I am already rooted.
Sent from my HTC One X
There are a few how-to's here on the forum that have already been posted but I'll say it quickly..
Make sure your bootloader is unlocked and you have superCID
You can then download the new RUU and install it.. (will wipe your phone so back up, also download the leaked RUU from the dev section NOT the OTA)
Unlock bootloader again..
Now install your recovery of choice (CWM or TeamWin)
Push super SU to phone for root
Now install the ROM of your choice!
(I did this by quick memory so I might have summarized a bit)
And I will still have root? Does me being on 1.73 pose an issue?
Sent from my HTC One X
Yes. You will have root after flashing any of the custom ROM.
1. One click root to root your phone.
2. Unlock bootloader and supercid from htcdev.com
3. Install cmw or twrp
4. Flash any custom Rom with os ver 1.82 or 1.85
5. Flash radio 1.85 or 1.88 if needed.
Welcome to flashing Rom addict club.
Related
Can anyone please tell me how to install a custom ROM onto my Desire S with the bootloader unlocked via HTC Dev and S-ON?
My guess is that you install CWMR and flash it via that. But you need root access to do that, I thought unlocking the bootloader was meant to eliminate this.
Also, I've been reading that people are having issues installing ROMs this way, they are experiencing a hang at the HTC logo on boot.
Any information will be greatly appreciated, thank you.
spagmuff said:
Can anyone please tell me how to install a custom ROM onto my Desire S with the bootloader unlocked via HTC Dev and S-ON?
My guess is that you install CWMR and flash it via that. But you need root access to do that, I thought unlocking the bootloader was meant to eliminate this.
Also, I've been reading that people are having issues installing ROMs this way, they are experiencing a hang at the HTC logo on boot.
Any information will be greatly appreciated, thank you.
Click to expand...
Click to collapse
After you flash the custom ROM using CWM, you then have to extract the boot.img file from the ROM.zip file and manually flash it in FASTBOOT mode. That is the nature of the unlocked bootloader. The boot partition is not mounted R/W in recovery mode, it is only mounted R/W when you are in bootloader FASTBOOT mode.
Ok, from reading yours and various other posts in the forum, I need to do the following to install a custom ROM with an unlocked bootloader and S-ON:
1. Unlock bootloader via HTC's website
2. Root phone (with gingerbreak apk?)
3. Install CWM via ROM manager
4. Backup existing ROM with CWM and backup files with titanium
5. Install ROM via CWM (wipe data, wipe cache, install ROM)
6. Flash boot.img (HBOOT, fastboot, and flash image)
7.Reboot into cyanogenmod
If I have anything wrong, please let me know. Thanks.
spagmuff said:
Ok, from reading yours and various other posts in the forum, I need to do the following to install a custom ROM with an unlocked bootloader and S-ON:
1. Unlock bootloader via HTC's website
2. Root phone (with gingerbreak apk?)
3. Install CWM via ROM manager
4. Backup existing ROM with CWM and backup files with titanium
5. Install ROM via CWM (wipe data, wipe cache, install ROM)
6. Flash boot.img (HBOOT, fastboot, and flash image)
7.Reboot into cyanogenmod
If I have anything wrong, please let me know. Thanks.
Click to expand...
Click to collapse
Step 2 and 3 are not necessary. After you Unlock the bootloader, you could then simply flash ClockworkMod in FASTBOOT mode.
1. Unlock bootloader.
2. Flash CWM image in FASTBOOT mode.
3. Backup existing ROM with CWM.
etc.
Successfully installed latest nightly r2 yesterday night :O
All is fine, 3D performance is smoothly and fine...
Thanks for yours posts
I would also like to thank you tpbklake, haven't tried it yet, but I'm sure it'll work!
I will be getting a new unbranded Desire S in a couple of days,
In case it will be running HBOOT 2.00.0002 with S-ON will I be still able to flash a custom rom on the device? AKAIK S-ON only protects the radio from being modified.
sorry, I'm new to this
edit: okay i read its not possible to flash a custom rom, but then what can i do when I rooted and flashed a custom recovery?
kjdfkvdjjndvldmv; awesome
xStreame said:
I will be getting a new unbranded Desire S in a couple of days,
In case it will be running HBOOT 2.00.0002 with S-ON will I be still able to flash a custom rom on the device? AKAIK S-ON only protects the radio from being modified.
sorry, I'm new to this
edit: okay i read its not possible to flash a custom rom, but then what can i do when I rooted and flashed a custom recovery?
Click to expand...
Click to collapse
Either isn't possible without s-off, look at the index thread, it's all there.
Swyped from my desire s running damn sweet ice cream
I'm on an Inc2 but since it's basically the same I hope this applies...
I'm in the same position as the OP with the newly unlocked bootloader via HTC.
I flashed cwm through fastboot but now I can't reflash through ROM Manager. I installed both SuperUser and BusyBox but both point the finger at eachother saying the other needs to be installed. What am I missing??
Kayak83 said:
I'm on an Inc2 but since it's basically the same I hope this applies...
I'm in the same position as the OP with the newly unlocked bootloader via HTC.
I flashed cwm through fastboot but now I can't reflash through ROM Manager. I installed both SuperUser and BusyBox but both point the finger at eachother saying the other needs to be installed. What am I missing??
Click to expand...
Click to collapse
Download the latest su-3.0.x.zip file. Then boot into CWM recovery and install this zip file. This will root the current ROM you have installed and then ROM Manager and BusyBox will both be happy.
@korenisko
So you unlocked via HTC dev, flashed custom recovery, wiped all partitions, flashed cyanogenmod, rebooted into fastboot, flashed boot.img via fastboot (fastboot flash boot /pathtobootimg/boot.img, if i recall correctly) and then you were able to boot into cyanogen?
I did exactly these steps (only with 4ext instead of cwm, which shouldn't affect the result) and was stuck with the white bootscreen and no adb logcat output whatsoever.
Currently I am back on a prerooted official RUU (2.3.3), but it still performs really bad and I would like to have cyanogenmod.
Btw: I have a Desire S, hboot 2.00.0002, S-ON, no carrier branding.
Thanks,
wenzlern
The currect way
I Have HTC Desire S with original Rom 2.10.401.8 and HBOOT 2.00.0002 S-On
My goal is to install the Endymon
I read many thread and i understood that the curret way to do this is:
Downgrade My ROM from 2.3.5 ( 2.10.401.8 with HBOOT 2.00.0002) to a ROM 2.3.3 with HBOOT 0.98.00000 (Ex: RUU_Saga_HTC_Europe_1.47.401.4_Radio_20.28I.30.085AU_3805.06.02.03_M_release_199410_signed.exe)
To do this i need to follow the steps from 1 to 7 of this
http://forum.xda-developers.com/showpost.php?p=20535265&postcount=26
Now i need to change HBOOT, Change Recovery and Root the phone. To do this i need to use Revolutionary tool for Windows from http://revolutionary.io/ and follow the istruction.
Now i can download the custom Rom and install using this way:
http://forum.xda-developers.com/showthread.php?t=1257731
Is It right?
Thanks
Hello, I just want to share my experience on how i managed to S-OFF my phone. My main problem was that I had the latest ruu on 2.10.401.8 and couldnt downgrade. Even though i unlocked the bootloader using the htcdev .bin file I couldnt install the proper recovery (clockwork mod) nor a previous ruu. So here is what I did.
I first unlocked the phone using the htcdev.
Then I followed those pretty 7 steps mentioned on prev post.
and changed my version to a prev one.
I r e l o c k e d my phone using htc supertool and
clicked my 1.47 ruu exe file. That worked and it downgraded my phone.
After that it was a piece of cake to use the revolutionary tool to S-OFF.
Thanks all the xda community for the infos i got and managed to do it....
cheers
mannkan said:
Hello, I just want to share my experience on how i managed to S-OFF my phone. My main problem was that I had the latest ruu on 2.10.401.8 and couldnt downgrade. Even though i unlocked the bootloader using the htcdev .bin file I couldnt install the proper recovery (clockwork mod) nor a previous ruu. So here is what I did.
I first unlocked the phone using the htcdev.
Then I followed those pretty 7 steps mentioned on prev post.
and changed my version to a prev one.
I r e l o c k e d my phone using htc supertool and
clicked my 1.47 ruu exe file. That worked and it downgraded my phone.
After that it was a piece of cake to use the revolutionary tool to S-OFF.
Thanks all the xda community for the infos i got and managed to do it....
cheers
Click to expand...
Click to collapse
Congrats. XDA is really helpful.
Sarina,
No need to wipe dalvik cache?
bcoz few ROM's developers days it a must!!!!
I trying to flash CM7.1 stable version.
mannkan said:
Hello, I just want to share my experience on how i managed to S-OFF my phone. My main problem was that I had the latest ruu on 2.10.401.8 and couldnt downgrade. Even though i unlocked the bootloader using the htcdev .bin file I couldnt install the proper recovery (clockwork mod) nor a previous ruu. So here is what I did.
I first unlocked the phone using the htcdev.
Then I followed those pretty 7 steps mentioned on prev post.
and changed my version to a prev one.
I r e l o c k e d my phone using htc supertool and
clicked my 1.47 ruu exe file. That worked and it downgraded my phone.
After that it was a piece of cake to use the revolutionary tool to S-OFF.
Thanks all the xda community for the infos i got and managed to do it....
cheers
Click to expand...
Click to collapse
Many thanks for this it has helped me get S-off again after a very frustrating weekend.
Hi. So this is what I have done so far..
1. Unlocked my bootloader using HTCDEV which unlocked my bootloader but kept S-On.
2. Then I flashed my recovery with 4Ext recovery.
3. Installed SU using that. Now I have super user privilages.
In the end, I have unlocked, rooted bootloader with HBOOT 2.00.0002 and S-On. I have taken back up of my current ROM.
From what I understand,
1. My phone is completely rooted.
2. To install a new ROM, I need to go to recovery in booloader and install from SD card.
3. I can revert to my old stock ROM using the back up I took earlier.
Please let me know whether I have got it right till here.
I went through beginner's guides and needed few things to clarify.
1. Will installing new ROM overwrite RUU ?
2. If yes, how do I back up RUU or Rom.zip before I flash with new ROM ?
3. Even though I restore back to my stock ROM. Will my super user privilages remain ?
4. If yes, how to remove them ? How to unroot ?
5. Can I restore to stock's recovery ?
In other words, can I COMPLETELY restore it back excluding unlocking? Please guide me with respect to Desire S.
Installing RUU will comletely restore your phone to stock, removing root as well. So basicly there is no point in backing it up.
Please note that when you unlocked with htcdev.com you will have to flash boot.img separately after installing any custom rom for the phone to boot.
Anyway, there are so many guides on this forum that unswers all your questions, don't see a point to start the new one here.
Sent from my HTC Desire S
dmatik said:
Installing RUU will comletely restore your phone to stock, removing root as well. So basicly there is no point in backing it up.
Please note that when you unlocked with htcdev.com you will have to flash boot.img separately after installing any custom rom for the phone to boot.
Anyway, there are so many guides on this forum that unswers all your questions, don't see a point to start the new one here.
Sent from my HTC Desire S
Click to expand...
Click to collapse
Thank you. And sorry for the new thread. I went through the guides. Just needed to confirm. These RUUs, are they fixed for a particular model and country? For example, this link provides some RUUs for Desire S for different countries. So RUUs for all the Desire S phones in that region are same, officially ?
Aah, this thread solved the problem that I've been thinking!
When I am going to sell my DS, only need to install correct RUU and it is fully stock again?
I've gotten totally accustomed to flashing on Samsung devices..
Currently have AT&T One X
- Rooted
- Bootloader Unlocked
- Running CleanRom 1.0
- Build Number 1.88.707.2
I'd like to get it back to just a rooted AT&T stock version so that I can make my own adjustments. I'm a bit confused as to the easiest way to do this.
05GT said:
I've gotten totally accustomed to flashing on Samsung devices..
Currently have AT&T One X
- Rooted
- Bootloader Unlocked
- Running CleanRom 1.0
- Build Number 1.88.707.2
I'd like to get it back to just a rooted AT&T stock version so that I can make my own adjustments. I'm a bit confused as to the easiest way to do this.
Click to expand...
Click to collapse
Someone would have to make a rooted stock from. Unless you want to go back to 1.73 which you would get the bugs it had. If you did that would require a firmware downgrade. There is a thread in dev section. Have you tried updating to cleanrom 2.5.5 the most recent version with tons of fixes and such.
Sent from my HTC One X using xda premium
if you haven't flashed something else or found this already, this link is to a stock, CWM ready version of the 1.85.502.3 RUU. read the OP first, because this version is NOT rooted.
You presumably already have SuperCID if you have bootloader unlocked. All you have to do is:
1) Relock bootloader
2) Run whatever RUU you want
3) Unlock bootloader again
4) Install CWM
5) Root via One click for 1.73 or 1.82, or install SuperSU via CWM for 1.85.
The pre-rooted deodexed 1.85 version posted in the response above is also a good approach (install via CWM). But its not fully stock, as in its deodexed. But if you want to install mods, this is a good thing anyway, since many of them require deodex. You also don't need to mess with relocking and unlocking the BL again. But its not clear what you want to do, if you want to return to the original shipped 1.73 firmware or not.
cortez.i said:
if you haven't flashed something else or found this already, this link is to a stock, CWM ready version of the 1.85.502.3 RUU. read the OP first, because this version is NOT rooted.
Click to expand...
Click to collapse
Thanks for the link.
redpoint73 said:
You presumably already have SuperCID if you have bootloader unlocked. All you have to do is:
1) Relock bootloader
2) Run whatever RUU you want
3) Unlock bootloader again
4) Install CWM
5) Root via One click for 1.73 or 1.82, or install SuperSU via CWM for 1.85.
The pre-rooted deodexed 1.85 version posted in the response above is also a good approach (install via CWM). But its not fully stock, as in its deodexed. But if you want to install mods, this is a good thing anyway, since many of them require deodex. You also don't need to mess with relocking and unlocking the BL again. But its not clear what you want to do, if you want to return to the original shipped 1.73 firmware or not.
Click to expand...
Click to collapse
Thanks,
Went this route and everything worked great. Now just need to flash the deodexed rom so I can make tweaks.
Sent from my HTC One X using xda premium
Hi everyone, I've yet to successfully load a custom ROM on my ville but I have got s-off and supercid. I'm currently on relocked bootloader running the total stock android 4.1. I'd just like to check through the steps I need to take to try a new 4.4.2 ROM. I was thinking of trying twistedkat.
1. Unlock bootloader (I already have the unlock file from htcdev)
2. Load custom recovery (I have TWRP 2.6.3.0 ready to go)
3. Flash SuperSU
4. Flash Rom file (do I need to unzip or flash the zip file in the recovery?)
5. Flash 4.4 Gapps
Any other steps I've missed? I'm on hboot 2.15, kernel 3.14 from the stock updater.
Thanks very much
fatboyslimerr said:
Hi everyone, I've yet to successfully load a custom ROM on my ville but I have got s-off and supercid. I'm currently on relocked bootloader running the total stock android 4.1. I'd just like to check through the steps I need to take to try a new 4.4.2 ROM. I was thinking of trying twistedkat.
1. Unlock bootloader (I already have the unlock file from htcdev)
2. Load custom recovery (I have TWRP 2.6.3.0 ready to go)
3. Flash SuperSU
4. Flash Rom file (do I need to unzip or flash the zip file in the recovery?)
5. Flash 4.4 Gapps
Any other steps I've missed? I'm on hboot 2.15, kernel 3.14 from the stock updater.
Thanks very much
Click to expand...
Click to collapse
1- if you didn't unlock your bootloader, you have to
2- i don't know which twrp you have but you shuld use the one from twistedkat thread (it's different from official one)
3- it's unrelated with custom rom flashing
4- DON'T unzip the rom, just flash the zip from recovery
5- you have to flash g-apps if want to use google's apps (gmail, playstore, etc.)
you don't need anything else AFAIK
have fun
Sent from my One S using xda app-developers app
By the way i recommend you to change your cid back to original, because supercid has no advantage over original cid. But one day you may want to turn back to stock and if you forget that your device has supercid it will brick the device
Sent from my One S using xda app-developers app
Do not forget to flash boot.img in fastboot! To do it, you need to extract boot.img from ROM zip file to same directory with fastboot on your computer and and reboot your device to fastboot mode. Then run this in terminal/cmd: fastboot flash boot boot.img . If you don't do this, your device won't boot to OS. Flashing SuperSU with a custom ROM is unnecessary since root usually is included in custom ROM.
EDIT: You don't need to flash boot.img, because you have S-OFF. Didn't notice it first.
ka_55 said:
By the way i recommend you to change your cid back to original, because supercid has no advantage over original cid. But one day you may want to turn back to stock and if you forget that your device has supercid it will brick the device
Sent from my One S using xda app-developers app
Click to expand...
Click to collapse
Oh no! I've already ran a RUU with supercid to get back to total stock and that didn't cause any problems. Problem is I don't actually know what the original cid was!
fatboyslimerr said:
Oh no! I've already ran a RUU with supercid to get back to total stock and that didn't cause any problems. Problem is I don't actually know what the original cid was!
Click to expand...
Click to collapse
I checked again, ruu doesn't seem cause a brick but ota updates may cause such thing. So i think you shouldn't install ota updates till you remember your original cid
Sent from my One S using xda app-developers app
Thanks for the replies guys. One last question. If I load Twistedkat, which is based on CM11, I'll lose Sense?
Can I have sense as well? Is there a flashable sense zip file or something?
Thanks!
You will absolutely lose sense, and there is no way to install sense with kitkat roms right now for our one s
Sent from my HTC One S
See attached screenshot. Now successfully on 4.4.2.
I did need to get SuperSU. Thanks for all the help
Its been a while since I've done anything on my AT&T HTC One. I'm still on 1.14 unlocked bootloader and an old ViperVL 3.2.2 Rom. I want to upgrade to Lollipop CM12 so I've done a lot of research and I wanted to make sure I'm doing it right before starting.
This is what I believe I need to do:
1. Update TWRP to v2.7.1.0 or higher to support new ROM
2. Get s-off in the bootloader using firewater
3. Once S-OFF is done, put phone in fastboot mode and run the RUU 3.18 JellyBean update (Its my understanding we need the JB bootloader for Lollipop custom ROM to work?)
4. Flash TWRP v2.7.1.0 back via fastboot
5. Go into recovery and flash New Rooted CM12 Rom
Before I start this method I also have a few questions:
1. Does my above steps seem right?
2. I'm having a hard time finding a working 3.18 RUU link. Most of the links on here are dead now. Is the RUU update a required step to jump from ViperXL 3.2 (bootloader v1.14) to Lollipop based roms? If its required, I found the OTA JB 3.18 update. Can I use the OTA version instead?
3. I've read that as long as the bootloader is already unlocked with S-OFF, I won't lose S-off or the unlocked bootloader from the RUU. Is this correct or will I need to unlock bootloader (Via HTC's dev site) and root again after using the JB RUU?
Thanks in advanced for the help with my questions.