P3113 in Mass Storage Mode? - Galaxy Tab 2 Q&A, Help & Troubleshooting

Hi, I recently purchased the Samsung Galaxy Tab2 P3113 (Wifi only model). I am unable to put the table in Mass Storage mode in Win7. I have tried both with checking and unchecking "USB debugging" in Settings, but neither has worked. Win7 does not even detect the device, hence cant even see it in Odin. Any suggestions on what I can do next?
Note: There is no option available under wireless and networks for "USB settings"

Your Win7 box should be seeing the Tab as an MTP device. I don't know if anyone has been able to make a mass storage mode work, but you could look here and then poke around the web for more.

have u installed driver?
if u didnt, install Kies then try again
Sent from my GT-P3110/e-vincent.tk using Tapatalk 2

Quite strange, MTP should work out of the box on Win 7. It's not mass storage, but well, it's almost the same from a user perspective. At my workplace, I did not install any Samsung piece of software and it just works. I plug the thing, it works.
Could you test with another cable? These can be found dirt cheap (3.5€ in France).

Or test on a different USB port on your machine. Some are very finicky.

Related

PC Connection

Hey all, I've had my Captivate now for afew days and I'm loving it, but today I ran across an issue that's driving me crazy.
For some reason when I connect it to my PC I'm not longer getting the Mount SD option on the phone and can't look at my files. I've enabled USB debugging and tried it. I've told it to come up as Mass Storage and tried it. I also told it to Ask when connected and it's still not working properly. The drives show up in Windows but cannot be accessed. I also no longer get the USB notification up in the notification bar.
The weird thing is sometimes if I restart the phone and connect it everything is fine, but then if I go to do it again nothing. Anyone have any suggestions?
Biggest misconception here is that its random, it isn't.
Download kies by samsung and update it and you will get the right USB drivers installed automatically.
If you choose not to do that, you'll Vast have to keep trying different ports or restarting.
Its also possible that you may have a faulty wire but this is unlikely.
systoxity said:
Biggest misconception here is that its random, it isn't.
Download kies by samsung and update it and you will get the right USB drivers installed automatically.
If you choose not to do that, you'll Vast have to keep trying different ports or restarting.
Its also possible that you may have a faulty wire but this is unlikely.
Click to expand...
Click to collapse
I've tried it with multiple wires, and when it works it is reliable, but most of the time it's just not showing a USB connection on the phone.
I spent awhile downloading Kies and it's updates and in Mass Storage mode it sees the drives of the phone but doesn't let me use them. I Kies mode it does nothing... This is so confusing...
Go in here download the drivers:
http://forum.xda-developers.com/showthread.php?t=728929
Be aware, they might take up to 15 minutes to install, and no KIE is not included.
Make sure you close all your apps on phone before connecting to PC. Few apps that use the SD will hold the resource and not allow for PC connection.
skizzz said:
Go in here download the drivers:
http://forum.xda-developers.com/showthread.php?t=728929
Be aware, they might take up to 15 minutes to install, and no KIE is not included.
Make sure you close all your apps on phone before connecting to PC. Few apps that use the SD will hold the resource and not allow for PC connection.
Click to expand...
Click to collapse
I downloaded those afew days ago but I will redownload and reinstall again just incase. I think the fact that the USB notification isn't showing up in the bar on the top of the phone is what's confusing me the most. Previously I would see the USB Icon and something would pop up saying I need to mount the drive. I would mount it and there would be no problem. Now I'm not getting that at all and I've tried Mass Storage, USB Debugging, Kies, and Ask.
I've never had a problem connecting my Captivate to my Windows 7 64 bit computer. I didn't install Kies or any drivers either. Not sure what all the fuss is about. I'm suspecting a lot of PEBCAK errors.
I'm starting to think there are some strange power requirements when connecting the phone to USB. Most of my systems have been fine but on one, when I connect the phone to the front USB ports, the USB Wifi adapter on the back simply stops working. While the phone is connected, the computer refuses to recognize the Wifi adapter. A soon as I disconnect the phone it starts working again.
I've seen people on other forums with intermittent issues getting the mass storage connection to work when connected to the front ports on their systems. A lot of times the front ports are connected through a USB hub in the computer case that doesn't deliver full power. If the phone isn't drawing enough power or is shunting power from other devices, this might explain the issues people are having.
Mine is acting up . I used both teh 5.02 drivers from samsung and the one linked here and similar results. In Samsung mode it goes to the Digital Still camera and flakes and on mass storage it shows two new drives..neither of which is writable or readable. This is on a cap with no SD card and XP sp3. I tried different ports but with the same result.
I was fighting with this all day. I installed, uninstalled, reinstalled all the drivers and kies, but, I was trying to connect via media player and nothing was happening. Then I noticed that there was a small message popping up on the Captivate's screen that said something about the device had to be on the idle screen before it would connect and fun the sync software. Tried turning off all running programs and still nothing. Then, I remembered that I had switched to Launcher Pro. I switched back to touch wiz, and lo and behold, it connected right up and allowed me to sync items with media player.
Interesting. I've been using ADW.Launcher and haven't see this problem except when I don't get the cable securely inserted into the Captivate. I even use a Nokia cable most of the time. The Kies Drivers are clearly the most stable. I downloaded the Drivers from the Captivate microsite and found they didn't support KIES, so I just reinstalled the KIES driver for MTP. Everything else works fine on W7x64.
++++UPDATE+++++ Validating MSHampton post
Well this sucks. On my Captivate, unless you are using TW.Launcher and in the idle screen, the Captivate won't launch MTP so you can connect to KIES. The USB Storage mode works with other Launchers (ADW and LaunchPro), but not KIES or Media. I didn't try PC Internet tethering. I switched between the two several times, and KIES only works with TW.Launcher on my device.
Is there anyone who knows of a Launcher OTHER than TW.Launcher that will interface with KIES so that the Captivate can connect? Or can ADW or LauncherPro be "tweaked" for the Captivate? I was just starting to like ADW.Launcher.
hitchb said:
[snip] Most of my systems have been fine but on one, when I connect the phone to the front USB ports, the USB Wifi adapter on the back simply stops working. While the phone is connected, the computer refuses to recognize the Wifi adapter. A soon as I disconnect the phone it starts working again.
[snip]
Click to expand...
Click to collapse
Holy crap, I have that EXACT same problem. I thought it was just the fact that my USB Wifi adapter is a piece if crap (which it is).
Just for reference, what kind is yours? Mine is a Belkin Wireless G F5D7050.
gtg465x said:
Just for reference, what kind is yours? Mine is a Belkin Wireless G F5D7050.
Click to expand...
Click to collapse
It's the Tenda 311U which is also a cheap piece of crap ($15 at Micro Center.) It doesn't look like they use the same chipset.
I've had the same issue as well. Hooking up the Captivate to the front USB ports disables my USB mouse (on the back). I'm not sure what it could be doing that would lock up the USB bus...
Using Windows 7 netbook
I finally got tired of it deciding and put in the mode to ask me when I connect. the problem i am having is when you just charge it, it does not know that it is just charging and wants to go to ysb mass storage or the other screen. also I use double twist to connect to the phone.
thanks
Jon
The best bet here is to use USB ports on the back of the computer.
Griffon23 said:
Hey all, I've had my Captivate now for afew days and I'm loving it, but today I ran across an issue that's driving me crazy.
For some reason when I connect it to my PC I'm not longer getting the Mount SD option on the phone and can't look at my files. I've enabled USB debugging and tried it. I've told it to come up as Mass Storage and tried it. I also told it to Ask when connected and it's still not working properly. The drives show up in Windows but cannot be accessed. I also no longer get the USB notification up in the notification bar.
The weird thing is sometimes if I restart the phone and connect it everything is fine, but then if I go to do it again nothing. Anyone have any suggestions?
Click to expand...
Click to collapse
If you're still having problems, select mass storage and connect the usb (or select ask every time and it will ask when you plug it in). To access the drive like a removable drive, you have to swipe the icon in the top right of the screen and select the usb selection. Then click mount and it should work! I had a hard time with this too and thought it wasn't very intuitive. Good luck!
joedoe said:
The best bet here is to use USB ports on the back of the computer.
Click to expand...
Click to collapse
Yep, strangely enough using the back ports worked. I'll have to see if a powered USB hub will work and then I guess we can conclude that it's a power issue.
mrbisme33 said:
If you're still having problems, select mass storage and connect the usb (or select ask every time and it will ask when you plug it in). To access the drive like a removable drive, you have to swipe the icon in the top right of the screen and select the usb selection. Then click mount and it should work! I had a hard time with this too and thought it wasn't very intuitive. Good luck!
Click to expand...
Click to collapse
I've set it to both Mass Storage and Ask every time and the problem I get is that I only get the USB icon up top sometimes, it's very rare. I've tried this on multiple ports and multiple PCs with the drivers downloaded and sometimes the notification shows up and I can select mount, but most of the time nothing is in my notification bar at all.
I love this phone but I don't understand why it's so frustrating just to connect it to a PC. I've also tried the Kies methods and it sees the phone, but doesn't let me access the files.
cellgeek said:
Interesting. I've been using ADW.Launcher and haven't see this problem except when I don't get the cable securely inserted into the Captivate. I even use a Nokia cable most of the time. The Kies Drivers are clearly the most stable. I downloaded the Drivers from the Captivate microsite and found they didn't support KIES, so I just reinstalled the KIES driver for MTP. Everything else works fine on W7x64.
++++UPDATE+++++ Validating MSHampton post
Well this sucks. On my Captivate, unless you are using TW.Launcher and in the idle screen, the Captivate won't launch MTP so you can connect to KIES. The USB Storage mode works with other Launchers (ADW and LaunchPro), but not KIES or Media. I didn't try PC Internet tethering. I switched between the two several times, and KIES only works with TW.Launcher on my device.
Is there anyone who knows of a Launcher OTHER than TW.Launcher that will interface with KIES so that the Captivate can connect? Or can ADW or LauncherPro be "tweaked" for the Captivate? I was just starting to like ADW.Launcher.
Click to expand...
Click to collapse
This just solved my kies and windows 7-64bit issue. This should be sticked advice or added to the wiki.
USB Setting no PC- Connection
I just got my AT&T captivate and I notice that under application,usb setting I don't have the PC-internet option in there. This is only what I have under USB setting:
Kies(Firmware update)
Media Player
Mass storage
Ask on connection
So, question is, how do I enable the pc-internet option? Any suggestion I really appreciate.
Sam

My MBP pro hates my captivate

So I can't mount storage on my new MBP (17"). I know about the usb debugging mode etc. and I can mount it just fine using a new iMac. When I enable disk mode on my MBP, sometimes the drives show up for a second and then disappear, and sometimes they don't show up at all.
I've tried all the USB ports: only the middle one ever even gives the error, the other two do nothing.
Anyone else have a MBP with this problem? Any suggestions for solutions?
*MBP = mac book pro
Try downloading KIES and see if it shows up on that.
Check Disk Utility, do they show up in there when plugged in and mounted on the phone?
Is Applications-USB Settings set to mass storage? If so, try setting it to "ask on connection"
on macs you need to have usb debugging on.
its in the capp manual on samsung web page
I have no problems with storage mode on my MacBook Pro I7
When you say you know all about debugging mode, does that mean you have it turned on? My mac mini works fine with debugging mode on.
k2snowboards88 said:
When you say you know all about debugging mode, does that mean you have it turned on? My mac mini works fine with debugging mode on.
Click to expand...
Click to collapse
Yeah, I have it turned on. Two important points here:
1. I had no trouble mounting/using/etc the storage until a couple weeks ago.
2. I can mount/use/etc the storage on another mac.
This leads me to believe that the prob is with my machine. For kicks, I made another user account on my machine (to rule out extension problems) and its flaky there too.
I mainly wanted to know if other 17" i7 users were having any trouble. Sounds like they're not.
Strange, no idea what's happening to you, sorry
Sucks when stuff like this happens

Captivate will not connect to computer

I'm trying to unlock my dads old Captivate, but I need to connect it to the computer to do this. No matter what I do, this phone will not connect or be recognized by the computer. I plug it into the computer and it makes the little beep it makes when you connect, but thats it. No "USB Connected" on the top bar or anything.
I can connect my captivate fine, its just his. I've tried uninstalling and reinstalling drivers and that wont work. Any ideas?
Do you have the drivers installed?
Sent from my SGH-I897
Ye, the drivers are installed. Would it be a driver problem though if my one captivate works, but the other? That sounds like a phone problem to me.
Settings> applications>usb(something or other)> mass storage.
Also make sure usb debugging is enabled...
The froyo settings might be different...the usb options could be in "wireless and network" instead of applications.
studacris said:
Settings> applications>usb(something or other)> mass storage.
Also make sure usb debugging is enabled...
The froyo settings might be different...the usb options could be in "wireless and network" instead of applications.
Click to expand...
Click to collapse
Nope, that doesnt work either. Its like its not even connected. Nothing showing up on my computer, nothing on the phone. The only thing that shows up when you plug it in is the charger icon comes on to let you know its charging.
i would recommend that you try another computer if that doesn't work, restore your phone to factory and if that doesn't work then you have two out of three possibilities that might lol, be seriously i think its not a drivers issue if the other phone is working. It might be a problem with the computer recognizing the port i really cant think of anything else..
Brought To You By:
-SystemErrorOne-
hmmmmmmmmmmmmmmmmmmmm
If it's not connecting to either captivate it's a driver issue. Make sure that USB debugging is on and that under the application usb setting you have it set to ask on connect. Try a different usb port on the pc, or another cable. I had a bad cable a while back that would charge but not connect, it was even the one that came with the phone.
Use a USB port off the back of the computer, coming DIRECTLY off the MB. There have been tons of issues with using remote USB ports. If it's beeping when it connects, it's being seen by the computer. Just that there's a problem with getting the proper info.
I get this problem sometimes too. This is how I solve it. Under USB settings select Samsung Kies and plug the USB cable into your computer and phone. See if your computer recognizes your phone. Mine won't recognize Mass Storage but will Kies. I don't have the program installed so windows will say Drivers Not Successfully Installed. Once you have done that, restart the computer and phone with USB cord unplugged. Once both come back on, switch your phone back to Mass Storage and plug in your USB cable to both the computer and phone and see if it will be detected by your computer. If not I would try a different USB cable. That is what works for me when I have that problem.
Sent from my SGH-I897 using XDA Premium App
Some cappies have issues with generic cables. Make its the original or a high quality one.
Sent from my GT-I9000 using XDA Premium App
Would be a good idea to check if the following
1. Settings- applications- USB settings : make it ask on connection.
2. Change the USB port which you connect

[Q] Samsung Galaxy Ace II - Disable MTP?

Hi all,
I've a proud owner of this I8160 phone. I'm glad of it, but the problem is that I can't access to the SD external's contents.
Firstly, I can get the USB working on PC by enabling it on "Settings -> Wireless networks -> USB settings". However, external SD (empty folders "external_sd" and "usbStorage" make me guessing about it) is not accessible, and I don't know how to get it.
I figured that "MTP connected" note on the phone has to be involved, so I tried to disable it. Searching in the web points to that USB debugging must be enabled; however, this won't perform anything new.
Hence, my question is, do you know how to disable the MTP connection on this phone? I want only USB mass storage, no kies at all!
Any ideas? Rooting may help?
USB Utilities
pacorrop said:
Hi all,
I've a proud owner of this I8160 phone. I'm glad of it, but the problem is that I can't access to the SD external's contents.
Firstly, I can get the USB working on PC by enabling it on "Settings -> Wireless networks -> USB settings". However, external SD (empty folders "external_sd" and "usbStorage" make me guessing about it) is not accessible, and I don't know how to get it.
I figured that "MTP connected" note on the phone has to be involved, so I tried to disable it. Searching in the web points to that USB debugging must be enabled; however, this won't perform anything new.
Hence, my question is, do you know how to disable the MTP connection on this phone? I want only USB mass storage, no kies at all!
Any ideas? Rooting may help?
Click to expand...
Click to collapse
No need to root your phone if you just want to transfer files. I have the same issue as yours.
Here's what I did:
1. On your phone go to settings>wifi and networks>USB Utilities
2. Do not connect the cable to the pc yet, tap first the box on the phone saying connect to pc (something like that)
3. Then connect the cable from the phone to the pc, a green android will appear then
You can now transfer files from your pc to your phone, vice versa.:good:

MTP does not work, at all.. What happened to MTP?

I have experienced issues with MTP (media transfer protocol) for over a year now.. I cannot connect my S7 to my pc using mtp, as there is no mtp option avaible when usb is connected and sliding down the drop down menu, selecting the usb options..
I've tried everything, different usb cables, different computers, laptops, different usb ports, calling *#0808# to make sure my connection is set to MTP + ADP, unlocking developer and selecting MTP from usb developer settings, nothing, nothing works, and I'm getting really really frustrated with it...
Yes I have Samsung Smart View installed, but no reaction when i plug in usb.
So again, there is no MTP option for me to connect my device to my pc in order to transfer files.
The ones I do have in the menu: transfer files, transfer images, midi connection, charge phone.
Also after I connected the usb to my phone, I get a pop up on my phone screen saying: "the connected device has no acces to data on this device, try reconnect the usb cable en try again."
Any ideas? Been looking for anwsers for a while now...
Regards
Do you have any package disabler apps running, if you do make sure no MTP apps are disabled.
Also make sure your PC has Samsung USB driver installed.
Hi,
which model is your S7 ?
if it is compatible, you may try my tutorial: [GUIDE/TUTORIAL/HOWTO] Samsung Galaxy S7 herolte stock to Android 10 | XDA Developers Forums (xda-developers.com)
bigalbklyn said:
Do you have any package disabler apps running, if you do make sure no MTP apps are disabled.
Also make sure your PC has Samsung USB driver installed.
Click to expand...
Click to collapse
I do have some apps disabeled, tho I don't think I've disabled an app that causes the issue with MTP..
What is disabled?
Briefing
Excel
Facebook
Google Drive
Google Play Films
Google Play Music
Hangouts
One Drive
PowerPoint
Samsung Gear
Samsung Health
Skype
I disabled those cause I don't really have a usecase for them
djibe89 said:
Hi,
which model is your S7 ?
if it is compatible, you may try my tutorial: [GUIDE/TUTORIAL/HOWTO] Samsung Galaxy S7 herolte stock to Android 10 | XDA Developers Forums (xda-developers.com)
Click to expand...
Click to collapse
Thanks for linking me this! I do have a compatible S7 model,
But I guess I forgot to mention that my phone also does not read any sd card anymore.. And the whole reason I want MTP to work is so I can transfer all my files to my pc, in order to do a proper factory wipe and reset everything, so I can begin again with a clean install.
Thus making your tutorioul not really usefull here since I'm loosing all my data with the update..

Categories

Resources