Database Info

Vista and WMDC can't connect

Well I've spent the last two days searching high and low and nothing I've read has been the solution.
I have a HTC Tilt with PDACorner 16(WM 6.1) and when I connect to usb the phone will say connecting, authenticating user, then user authenticated and display that it is connected however WMDC will say not connected. Below are the steps i've taken. I do not use MS onecare.
I added all the appropriate ports to my firewall
on the computer:
disabled the firewall altogether
disabled antivirus(symantec endpoint protection)
disabled windows defender
removed the driver, updated the driver, reinstalled the driver
on the phone:
disabled advanced usb connection(on my phone its labeled as fast usb syncing, without this disabled the phone wont connect at all)
re-flashed the device
finally, I have synced the phone with other vista machines and xp machines which worked flawlessly.
I cant figure out what I am missing, any help would be very much appreciated! I swear I've searched this forum and all of google high and low and none of the solutions have worked for me.
edit: i forgot to add that the usb connection that I am getting now is good enough that the RUU program has no problem running and flashing a rom its just WMDC which will not connect with the phone

Try updating your version of WMDC....
I found I needed to upgrade to get my Omnia to sync.

Asphyx said:
Try updating your version of WMDC....
I found I needed to upgrade to get my Omnia to sync.
Click to expand...
Click to collapse
thanks, but i also updated to the newest version of WMDC

bump! has anyone had this problem?

Hope this helps: http://forum.xda-developers.com/showthread.php?t=313001

Microsoft Windows Mobile Remote Adapter Driver ERROR

Hi All,
I'm running Windows 7
1. Suddenly my Windows Mobile Device Center Failed to recognize my phone and connect to sync. After some troubleshooting I realized the "Microsoft Windows Mobile Remote Adapter Driver" Failed to work correctly Saying "This device cannot Start (Code 10).
I uninstalled the driver in the Device Manager and attempted to Search for the Driver again after a Restart, my phone was again found while attempting to Sync but once again during Driver installation it failed and gave the Exclamation Mark stating an issue and sure enough it is the Code 10 error again.
2. This exact same issue happens when attempting to Tether to use the Phone as an Internet Modem. The Network Adapter driver to Tether is "Remote NDIS based Internet Sharing Device" and it also doesn't install fine anymore. So no Tethering for me via USB.
Now, all the above happened suddenly while using the Internet Tethering with no issues. It simply disconnected and then that was the end of that.
Let me tell you to what Extent I went to try to get this to work. I re-formated my hard drive and re-installed Windows 7. And NOPE it didn't work. Windows Mobile Device Center is properly installed and that is when all the drivers are provided, during the WMDC installation. Once WMDC was installed, my phone was found, the Activsync feature and the Internet Modem feature, and the driver installation attempt happened, The correct drivers were found, but they just weren't Installed successfully as explained above. I'm currently browsing the internet using the Bluetooth PAN Internet Sharing, which works wonderfully with no issues.
But I really need to get the above two items working again, otherwise I can no longer connect my phone via activesync or better said WMDC for Windows 7 to Flash a New ROM.
Now so that nobody thinks it's a problem with my phone, I have three other computers where I can connect via WMDC and Tether via USB with no issues. But I'm having trouble with my Dell Inspiron 9300 which gave me no issues for Months until now.
I considered myself very computer savvy but at this point I'm really stuck!
Any help?
Thanks in advance,
Raudel

try to download activesync for w7 from microsoft
i had a prb, dunno if similar, but that helped me

Moved as not ROM Development.

avatar_ro said:
try to download activesync for w7 from microsoft
i had a prb, dunno if similar, but that helped me
Click to expand...
Click to collapse
The Windows Mobile Device Center that gets Installed is the one with Windows Update. So it must be the correct one with the Win 7 Drivers.
Thank you for your reply.
Any other ideas would be really appreciated.
Thanks in advance,
Raudel

i have the same problem with win7 and HTC touch2
i cannot solve the problem with HTC touch GSM everything is OK
any Help !!!!

I'm also getting this problem. It just began after a hardware upgrade. Microsoft remote adaptor cannot start. I have tried re-installing device centre numerous times and i cannot get device center to recognise my phone.
It works fine in disk drive mode however.
Edited to add that my device is recognised fine on other machines. So it is an issue with my PC. Interestingly my wireless usb adaptor won't work either.

I had a similar problem, found a solution online. There were some issues with Intel P55 chipset, it sync up immediately after BIOS update and reboot.
Hope this makes your day, best of luck.

Diamond 2 will not synch with windows 7 64 bit

Hi
My diamond 2 completely refuses to be recognised by windows 7 64 bit despite the fact that the first time it was connected it WORKED fine. Here are some notes about what ive tried:
I have tried reinstalling WMDC
Changed the settings in USB to PC on the phone (disable advanced USB connections)
I have tried different cables (the device charges but will not connect).
The device connects with NO problems to my windows XP machine at work!
When i install drvupdate-amd64.exe it looks for an 'unknown device' but cannot find it and says the device is unplugged.
Ive tried turning the phone off and on whilst plugged into the USB
**edit** i have also tried different USB ports on the PC!
Can someone help as i want to update to hard spl but i need the sync connection and i have tried everything i can find in various forums!
Thanks in advance!

I have the same problem, did you or any one else have the solution to these problem? Thanks in advance.

if you have asus p7p55d motherboard you should know that there is a fault of the BIOS. When I enable the option "Intel C-State Tech", the driver for my mobile phone can be installed. So actually it is a problem with USB on that board, if the option is disabled. I hope this problem will be solved with a BIOS update soon. Until then I can live with that option enabled.

Well, after a lot time waste, I have a W7 64 bits but Office 2010 32 bits and everything works like a charm. I can sync without any problem with my HD2 (Leo).
to those who have the same problem, just check it and let us know.

You should install ActiveSync at first,if your diamond2 still can't synch with you PC.you can updated your device drivers in device management.

internet connection mode problems with windows 7 x64?

Hey guys, so i plugged in my phone and enabled internet connection mode but then it says the drivers failed to install, and i have no idea how to get it up and working. Anyone find a solution to this?

anyone? someone has to know something!

Have you set up HTC Sync on the computer? I don't know if that would fix it, but it is worth a try.

[q] help!! No usb connection

I frequently buy phones just for phone and happened to buy this one yesterday. I try to unlock and root all my androids but i cant access the usb connection on this one to allow me to transfer and use fastboot. I plug it in and the phone charges perfectly fine but doesnt give option for usb and doesnt pop up on computer, doesnt even make the sound it makes when something new is connected. I dont know whats the problem ive tried digging around the internet and cant find a solution so im hoping you guys can help. Please any suggestions would be greatly appreciated. Ive installed htc sync, uninstalled it, tried again, installed htc drivers over again, tried different computers with windows 7 and windows 8.1, tried different usb cords, even went and wasted money on a new one.