Whatever I seem to try I keep rebooting into recovery. Could someone please help me out? Here's the log:
Starting recovery on Thu Jun 7 01:24:04 2012
framebuffer: fd 4 (480 x 800)
CWM-based Voodoo Lagfix Recovery v5.0.2.7
recovery filesystem table
=========================
0 /tmp ramdisk (null) (null)
1 /boot bml boot (null)
2 /cache rfs /dev/block/stl11 (null)
3 /data rfs /dev/block/stl10 (null)
4 /recovery bml recovery (null)
5 /sdcard vfat /dev/block/mmcblk0p1 (null)
6 /system rfs /dev/block/stl9 (null)
W:Unable to get recovery.fstab info for /datadata during fstab generation!
W:Unable to get recovery.fstab info for /emmc during fstab generation!
W:Unable to get recovery.fstab info for /sd-ext during fstab generation!
I:Completed outputting fstab.
Irocessing arguments.
mount: mounting /dev/block/stl11 on /cache failed: Invalid argument
I:Checking arguments.
I:device_recovery_start()
Command: "/sbin/recovery"
ro.secure=0
ro.allow.mock.location=0
ro.debuggable=0
persist.service.adb.enable=1
ro.factorytest=0
ro.serialno=
ro.bootmode=unknown
ro.baseband=unknown
ro.carrier=unknown
ro.bootloader=unknown
ro.hardware=herring
ro.revision=48
init.svc.recovery=running
init.svc.adbd=running
ro.build.product=herring
ro.product.device=herring
ro.radio.noril=yes
ro.bt.bdaddr_path=/efs/bluetooth/bt_addr
status.battery.state=Slow
status.battery.level=5
status.battery.level_raw=50
status.battery.level_scale=9
ro.telephony.call_ring.multiple=0
ro.nfc.port=I2C
I:Checking for extendedcommand...
I:Skipping execution of extendedcommand, file not found...
What ROM are you running? It might be worth wiping and reinstalling it.
Ah nevermind I fixed it flashing KG4 worked
Where u on mtd and flashed a bml rom thru cwm? Lol
sent from my batcave
Related
Hey guys,
I am having trouble installing Jelly Bean on my transformer. I have followed the apparently noob proog upgrade guide but run into issues. When I reboot after putting the upgrade files in the /cache directory the upgrade starts and goes for 30 seconds or so then fails and says that it failed to verify the package. Please have a look at my log file and let me know what I am going wrong here. Thanks.
Starting recovery on Thu Dec 27 22:56:16 2012
can't open /dev/tty0: No such file or directory
framebuffer: fd 3 (1280 x 800)
CWM-based Recovery v5.5.0.4
recovery filesystem table
=========================
0 /tmp ramdisk (null) (null) 0
1 /system ext4 /dev/block/mmcblk0p1 (null) 0
2 /cache ext4 /dev/block/mmcblk0p2 (null) 0
3 /misc emmc /dev/block/mmcblk0p3 (null) 0
4 /staging ext3 /dev/block/mmcblk0p4 (null) 0
5 /boot emmc /dev/block/mmcblk0p5 (null) 0
6 /recovery emmc /dev/block/mmcblk0p7 (null) 0
7 /data ext4 /dev/block/mmcblk0p8 (null) 0
W:Unable to get recovery.fstab info for /datadata during fstab generation!
W:Unable to get recovery.fstab info for /emmc during fstab generation!
W:Unable to get recovery.fstab info for /sdcard during fstab generation!
W:Unable to get recovery.fstab info for /sd-ext during fstab generation!
I:Completed outputting fstab.
Irocessing arguments.
I:Got arguments from /cache/recovery/command
I:Checking arguments.
I:device_recovery_start()
Command: "/sbin/recovery" "--update_package=/cache/dlpkgfile"
ro.secure=1
ro.allow.mock.location=0
ro.debuggable=1
persist.sys.usb.config=mtp,adb
ro.build.id=IMM76I
ro.build.display.id=cm_tf300t-userdebug 4.0.4 IMM76I eng.xplodwild.20120523.001506 test-keys
ro.build.version.incremental=eng.xplodwild.20120523.001506
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.4
ro.build.date=Wed May 23 00:15:38 CEST 2012
ro.build.date.utc=0
ro.build.type=userdebug
ro.build.user=xplodwild
ro.build.host=barbecue
ro.build.tags=test-keys
ro.product.model=Transformer Prime TF300T
ro.product.brand=asus
ro.product.name=EeePad
ro.product.device=tf300t
ro.product.board=cardhu
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=asus
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=tegra
ro.build.product=tf300t
ro.build.description=US_epad-user 4.0.3 IML74K US_epad-9.4.2.21-20120323 release-keys
ro.build.fingerprint=asus/US_epad/TF201:4.0.3/IML74K/US_epad-9.4.2.21-20120323:user/release-keys
ro.build.characteristics=tablet
ro.cm.device=tf300t
ro.carrier=wifi-only
ro.com.android.dateformat=MM-dd-yyyy
wifi.interface=wlan0
wifi.supplicant_scan_interval=15
ro.opengles.version=131072
persist.tegra.nvmmlite=1
ro.epad.model=TF300T
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=256m
ro.rommanager.developerid=cyanogenmod
keyguard.no_require_sim=true
ro.com.google.clientidbase=android-google
ro.com.android.wifi-watchlist=GoogleGuest
ro.setupwizard.enterprise_mode=1
ro.com.android.dataroaming=false
ro.cm.version=9.0.0-RC0-tf300t-UNOFFICIAL
ro.modversion=9.0.0-RC0-tf300t-UNOFFICIAL
ro.config.ringtone=CyanTone.ogg
ro.config.notification_sound=CyanMessage.ogg
ro.config.alarm_alert=CyanAlarm.ogg
dalvik.vm.lockprof.threshold=500
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
net.change=net.bt.name
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.factorytest=0
ro.serialno=015d14fedc64160b
ro.bootmode=unknown
ro.baseband=unknown
ro.bootloader=unknown
ro.hardware=cardhu
ro.revision=0
ro.emmc=0
init.svc.recovery=running
init.svc.mischelp=restarting
init.svc.adbd=running
service.adb.root=1
Finding update package...
I:Update location: /cache/dlpkgfile
Opening update package...
I:1 key(s) loaded from /res/keys
Verifying update package...
I:comment is 1682 bytes; signature 1664 bytes from end
E:failed to verify whole-file signature
I:verify_file returned 1
E:signature verification failed
Installation aborted.
E:unknown volume for path [/sd-ext]
rm: can't remove '/cache/dalvik-cache': No such file or directory
rm: can't remove '/sd-ext/dalvik-cache': No such file or directory
Dalvik Cache wiped.
Signature failed probably means your file got corrupted while downloading. I would suggest downloading the file again and see if that solves it.
If it doesn't then plz post which thread/guide you are following (with a link for the lazy people).
Good luck.
Verstuurd van mijn ASUS Transformer Pad TF300T met Tapatalk
I sense a load of fun with this since I have yet to have a smooth time with rooting (well it is rooted) and getting things to work and now this error. (Other devices ive rooted and had clockwork work perfectly but anything with Asus label always screams - I will be a pain to get to work!)
CWM gives an error when backing up, here is the log.
Code:
Starting recovery on Fri Jan 11 00:24:55 2013
can't open /dev/tty0: No such file or directory
framebuffer: fd 3 (1280 x 800)
CWM-based Recovery v6.0.2.3
recovery filesystem table
=========================
0 /tmp ramdisk (null) (null) 0
1 /system ext4 /dev/block/mmcblk0p1 (null) 0
2 /cache ext4 /dev/block/mmcblk0p2 (null) 0
3 /misc emmc /dev/block/mmcblk0p3 (null) 0
4 /boot emmc boot (null) 0
5 /recovery emmc recovery (null) 0
6 /staging emmc /dev/block/mmcblk0p4 (null) 0
7 /btmac vfat /dev/block/mmcblk0p5 (null) 0
8 /data ext4 /dev/block/mmcblk0p8 (null) -32768
9 /emmc datamedia /dev/null (null) 0
10 /sdcard vfat /dev/block/mmcblk1p1 /dev/block/mmcblk1 0
W:Unable to get recovery.fstab info for /datadata during fstab generation!
W:Unable to get recovery.fstab info for /sd-ext during fstab generation!
I:Completed outputting fstab.
I:Processing arguments.
I:Checking arguments.
I:device_recovery_start()
Command: "/sbin/recovery"
ro.boot.serialno=015d2bc2843bfc03
ro.boot.commchip_id=0
ro.boot.productid=0x02
ro.boot.carrier=wifi-only
ro.serialno=015d2bc2843bfc03
ro.bootmode=unknown
ro.baseband=unknown
ro.bootloader=unknown
ro.hardware=cardhu
ro.revision=0
ro.emmc=0
ro.boot.emmc=0
ro.factorytest=0
ro.secure=1
ro.allow.mock.location=0
ro.debuggable=1
persist.sys.usb.config=mtp,adb
ro.build.id=JOP40D
ro.build.display.id=cm_tf300t-userdebug 4.2.1 JOP40D eng.xplodwild.20121218.214839 test-keys
ro.build.version.incremental=eng.xplodwild.20121218.214839
ro.build.version.sdk=17
ro.build.version.codename=REL
ro.build.version.release=4.2.1
ro.build.date=Tue Dec 18 21:49:07 UTC 2012
ro.build.date.utc=0
ro.build.type=userdebug
ro.build.user=xplodwild
ro.build.host=ribs
ro.build.tags=test-keys
ro.product.model=Transformer Pad TF300T
ro.product.brand=asus
ro.product.name=EeePad
ro.product.device=tf300t
ro.product.board=cardhu
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=asus
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=tegra
ro.build.product=tf300t
ro.build.description=WW_epad-user 4.0.3 IML74K WW_epad-9.4.3.30-20120604 release-keys
ro.build.fingerprint=asus/WW_epad/EeePad:4.0.3/IML74K/WW_epad-9.4.3.30-20120604:user/release-keys
ro.build.characteristics=tablet
ro.cm.device=tf300t
ro.carrier=wifi-only
ro.sf.lcd_density=160
ro.com.android.dateformat=MM-dd-yyyy
wifi.interface=wlan0
wifi.supplicant_scan_interval=15
ro.opengles.version=131072
persist.tegra.nvmmlite=1
ro.epad.model=TF300T
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=256m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=512k
dalvik.vm.heapmaxfree=2m
ro.rommanager.developerid=cyanogenmod
keyguard.no_require_sim=true
ro.com.google.clientidbase=android-google
ro.com.android.wifi-watchlist=GoogleGuest
ro.setupwizard.enterprise_mode=1
ro.com.android.dataroaming=false
ro.cm.version=10.1-20121218-UNOFFICIAL-tf300t
ro.modversion=10.1-20121218-UNOFFICIAL-tf300t
ro.config.ringtone=Orion.ogg
ro.config.notification_sound=Deneb.ogg
ro.config.alarm_alert=Hassium.ogg
dalvik.vm.lockprof.threshold=500
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
net.change=net.bt.name
dalvik.vm.stack-trace-file=/data/anr/traces.txt
init.svc.ueventd=running
init.svc.recovery=running
init.svc.mischelp=restarting
init.svc.adbd=running
service.adb.root=1
I:Checking for extendedcommand...
I:Skipping execution of extendedcommand, file not found...
SD Card space free: 30424MB
Backing up boot image...
Incorrect mbr signatures!
Error in reading mbr!
Error while backing up boot image!I:using /data/media for /emmc/clockworkmod/backup/2013-01-11.00.25.47.
SD Card space free: 16970MB
Backing up boot image...
Incorrect mbr signatures!
Error in reading mbr!
Error while backing up boot image!Formatting /sdcard...
I:Formatting unknown device.
rm: can't remove '.' or '..'
rm: can't remove '.' or '..'
Done.
SD Card space free: 30424MB
Backing up boot image...
Incorrect mbr signatures!
Error in reading mbr!
Error while backing up boot image!I:using /data/media for /emmc/clockworkmod/backup/2013-01-11.00.36.36.
SD Card space free: 16970MB
Backing up boot image...
Incorrect mbr signatures!
Error in reading mbr!
Error while backing up boot image!I:Can't format unknown volume: /external_sd
I:Can't partition non-vfat: datamedia
test to backup with twrp (a recoverylike cwm)
http://forum.xda-developers.com/showthread.php?p=36536810
only if you have jellybean
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
okrasitna said:
test to backup with twrp (a recoverylike cwm)
http://forum.xda-developers.com/showthread.php?p=36536810
only if you have jellybean
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
Click to expand...
Click to collapse
Ya its jb. Ill give TWRP a whirl. Thanks.
+1 FOR TRWP.
Sent from my Transformer Pad TF300T using Xparent Purple Tapatalk 2
After every boot on my nexus s appears the error message: "System doeas not resond, Wait or force close?". I did full wipe more time, i tried different ROM (slimrom, cyanogenmod, bam-andorid) but the result is the same error message. The Md5 of the ROMs is correct. What can i do? There are same errors on the log file:
Starting recovery on Thu Apr 25 09:27:23 2013
can't open /dev/tty0: No such file or directory
framebuffer: fd 3 (480 x 800)
ClockworkMod Recovery v6.0.2.5
recovery filesystem table
=========================
0 /tmp ramdisk (null) (null) 0
1 /sdcard vfat /dev/block/platform/s3c-sdhci.0/by-name/media (null) 0
2 /system ext4 /dev/block/platform/s3c-sdhci.0/by-name/system (null) 0
3 /cache yaffs2 cache (null) 0
4 /data ext4 /dev/block/platform/s3c-sdhci.0/by-name/userdata (null) 0
5 /misc mtd misc (null) 0
6 /boot mtd boot (null) 0
7 /recovery mtd recovery (null) 0
8 /bootloader mtd bootloader (null) 0
9 /radio mtd radio (null) 0
W:Unable to get recovery.fstab info for /datadata during fstab generation!
W:Unable to get recovery.fstab info for /emmc during fstab generation!
W:Unable to get recovery.fstab info for /sd-ext during fstab generation!
I:Completed outputting fstab.
Irocessing arguments.
mtd: successfully wrote block at 0
I:Set boot command "boot-recovery"
I:Checking arguments.
I:device_recovery_start()
Command: "/sbin/recovery"
ro.boot.serialno=3635F8B8B5DF00EC
ro.boot.bootloader=I9020XXLC2
ro.boot.baseband=I9020XXKI1
ro.boot.info=0x4,0x4,1
ro.boot.carrier=EUR
ro.serialno=3635F8B8B5DF00EC
ro.bootmode=unknown
ro.baseband=I9020XXKI1
ro.bootloader=I9020XXLC2
ro.hardware=herring
ro.revision=52
ro.emmc=0
ro.boot.emmc=0
ro.factorytest=0
ro.secure=1
ro.allow.mock.location=0
ro.debuggable=1
persist.sys.usb.config=mass_storage,adb
ro.build.id=JZO54K
ro.build.display.id=cm_crespo-userdebug 4.1.2 JZO54K eng.hudson.20121222.210247 test-keys
ro.build.version.incremental=eng.hudson.20121222.210247
ro.build.version.sdk=16
ro.build.version.codename=REL
ro.build.version.release=4.1.2
ro.build.date=Sat Dec 22 21:03:21 PST 2012
ro.build.date.utc=0
ro.build.type=userdebug
ro.build.user=hudson
ro.build.host=koushik-lion
ro.build.tags=test-keys
ro.product.model=Nexus S
ro.product.brand=Google
ro.product.name=soju
ro.product.device=crespo
ro.product.board=herring
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Samsung
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=s5pc110
ro.build.product=crespo
ro.build.description=soju-user 4.1.2 JZO54K 485486 release-keys
ro.build.fingerprint=google/soju/crespo:4.1.2/JZO54K/485486:user/release-keys
ro.build.characteristics=nosdcard
ro.cm.device=crespo
rild.libpath=/vendor/lib/libsec-ril.so
rild.libargs=-d /dev/ttyS0
ro.sf.lcd_density=240
ro.rommanager.developerid=cyanogenmod
keyguard.no_require_sim=true
ro.com.google.clientidbase=android-google
ro.com.android.wifi-watchlist=GoogleGuest
ro.setupwizard.enterprise_mode=1
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=false
ro.cm.version=10-20121223-UNOFFICIAL-crespo
ro.modversion=10-20121223-UNOFFICIAL-crespo
ro.config.ringtone=Orion.ogg
ro.config.notification_sound=Deneb.ogg
ro.config.alarm_alert=Hassium.ogg
ro.carrier=unknown
ro.telephony.default_network=3
ro.opengles.version=131072
wifi.interface=wlan0
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=128m
dalvik.vm.lockprof.threshold=500
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
net.change=net.bt.name
dalvik.vm.stack-trace-file=/data/anr/traces.txt
init.svc.ueventd=running
init.svc.recovery=running
service.adb.root=1
init.svc.adbd=running
I:Checking for extendedcommand...
I:Skipping execution of extendedcommand, file not found...
mtd: successfully wrote block at 0
I:Set boot command ""
I:Can't format unknown volume: /external_sd
I:Can't format unknown volume: /emmc
Thanks for replies.
I am sure that you would have done a completely clean install (Dalvik,Cache,Data) on each install, but I would recommend; flash back to stock (start on a clean slate, easier to see if/what goes wrong),wipe dalvik/cache/data, flash custom rom & reboot (don't unlock, just let it sit for a minute, reboot to recovery wipe just dalvik and cache and flash the CORRECT gapps, reboot, set up phone (see if you have any warnings) and don't mod/tweak,
Setting.Out said:
I am sure that you would have done a completely clean install (Dalvik,Cache,Data) on each install, but I would recommend; flash back to stock (start on a clean slate, easier to see if/what goes wrong),wipe dalvik/cache/data, flash custom rom & reboot (don't unlock, just let it sit for a minute, reboot to recovery wipe just dalvik and cache and flash the CORRECT gapps, reboot, set up phone (see if you have any warnings) and don't mod/tweak,
Click to expand...
Click to collapse
Thanks it works!!!
I'm on Thunderzap kernel 3.0, with CWM 6.0.3.5. Whenever I try to make a backup to external sd, or try to mount ext sd card, cwm says its cant mount external sd. I have done this earlier on old ROMs. Currently on 15.3.A.0.26, (android 4.2.2). Phone is rooted, BL unlocked.
Given below is the recovery.log after trying to access "Backup to External sd" and "Mount external sd".
I think the primary reason for failure is log claiming that the filesystem on sd card is non-vfat. However, the sd card was formatted by android itself. So it must be must be fat32, and yes, it is - I mean, I didnt touch the card's partition or format it outside the phone.
Weird thing is that Gparted shown my 32 GB Sandisk Ultra (Class 10) card as Unallocated space (while it was mounted). Yet the phone mounts the card in mass storage mode and I can read/write.
Code:
Starting recovery on Tue Feb 24 21:54:23 1970
Successfuly set bpp vi to 32
framebuffer: fd 4 (480 x 854)
CWM-based Recovery v6.0.3.5(Powered by TZ)
recovery filesystem table
=========================
0 /tmp ramdisk (null) (null) 0
1 /boot emmc /dev/block/platform/msm_sdcc.1/by-name/boot (null) 0
2 /system ext4 /dev/block/mmcblk0p28 (null) 0
3 /cache ext4 /dev/block/mmcblk0p30 (null) 0
4 /data ext4 /dev/block/mmcblk0p31 (null) -16384
5 /sdcard vfat /dev/block/mmcblk0p32 (null) 0
6 /external_sd auto /dev/block/mmcblk1p1 /dev/block/mmcblk1 0
W:Unable to get recovery.fstab info for /datadata during fstab generation!
W:Unable to get recovery.fstab info for /emmc during fstab generation!
W:Unable to get recovery.fstab info for /sd-ext during fstab generation!
I:Completed outputting fstab.
I:Processing arguments.
I:Checking arguments.
I:device_recovery_start()
Command: "/sbin/recovery"
ro.boot.hardware=qcom
ro.boot.emmc=true
ro.boot.bootloader=s1
ro.boot.serialno=ZH80004JV8
ro.boot.baseband=msm
ro.serialno=ZH80004JV8
ro.bootmode=unknown
ro.baseband=msm
ro.bootloader=s1
ro.hardware=qcom
ro.revision=0
ro.emmc=0
ro.factorytest=0
ro.secure=0
ro.allow.mock.location=1
ro.debuggable=1
persist.sys.usb.config=adb
ro.build.id=JSS15J
ro.build.display.id=cm_taoshan-eng 4.3 JSS15J eng.varun.chitre15.20130801.154858 test-keys
ro.build.version.incremental=eng.varun.chitre15.20130801.154858
ro.build.version.sdk=18
ro.build.version.codename=REL
ro.build.version.release=4.3
ro.build.date=Thu Aug 1 15:49:28 BST 2013
ro.build.date.utc=0
ro.build.type=eng
ro.build.user=varun.chitre15
ro.build.host=build1
ro.build.tags=test-keys
ro.product.model=taoshan
ro.product.brand=sony
ro.product.name=cm_taoshan
ro.product.device=taoshan
ro.product.board=taoshan
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=sony
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=unknown
ro.build.product=taoshan
ro.build.description=cm_taoshan-eng 4.3 JSS15J eng.varun.chitre15.20130801.154858 test-keys
ro.build.fingerprint=sony/cm_taoshan/taoshan:4.3/JSS15J/eng.varun.chitre15.20130801.154858:eng/test-keys
ro.build.characteristics=default
ro.cm.device=taoshan
ro.rommanager.developerid=cyanogenmod
keyguard.no_require_sim=true
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.clientidbase=android-google
ro.com.android.wifi-watchlist=GoogleGuest
ro.setupwizard.enterprise_mode=1
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=false
ro.cm.version=10.2-20130801-UNOFFICIAL-taoshan
ro.modversion=10.2-20130801-UNOFFICIAL-taoshan
ro.config.ringtone=Orion.ogg
ro.config.notification_sound=Argon.ogg
ro.config.alarm_alert=Hassium.ogg
ro.carrier=unknown
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.adb.qemud=1
ro.kernel.android.checkjni=1
net.bt.name=Android
net.change=net.bt.name
dalvik.vm.stack-trace-file=/data/anr/traces.txt
init.svc.ueventd=running
init.svc.adbd=running
init.svc.recovery=running
I:Checking for extendedcommand...
I:Skipping execution of extendedcommand, file not found...
mount: mounting /dev/block/mmcblk1p1 on /external_sd failed: No such file or directory
Can't mount backup path.
mount: mounting /dev/block/mmcblk1p1 on /external_sd failed: No such file or directory
Error mounting /external_sd!
I:Can't partition non-vfat: auto
I:Can't format unknown volume: /emmc
Bump!
jayaura said:
I'm on Thunderzap kernel 3.0, with CWM 6.0.3.5. Whenever I try to make a backup to external sd, or try to mount ext sd card, cwm says its cant mount external sd. I have done this earlier on old ROMs. Currently on 15.3.A.0.26, (android 4.2.2). Phone is rooted, BL unlocked.
Given below is the recovery.log after trying to access "Backup to External sd" and "Mount external sd".
I think the primary reason for failure is log claiming that the filesystem on sd card is non-vfat. However, the sd card was formatted by android itself. So it must be must be fat32, and yes, it is - I mean, I didnt touch the card's partition or format it outside the phone.
Weird thing is that Gparted shown my 32 GB Sandisk Ultra (Class 10) card as Unallocated space (while it was mounted). Yet the phone mounts the card in mass storage mode and I can read/write.
Code:
Starting recovery on Tue Feb 24 21:54:23 1970
Successfuly set bpp vi to 32
framebuffer: fd 4 (480 x 854)
CWM-based Recovery v6.0.3.5(Powered by TZ)
recovery filesystem table
=========================
0 /tmp ramdisk (null) (null) 0
1 /boot emmc /dev/block/platform/msm_sdcc.1/by-name/boot (null) 0
2 /system ext4 /dev/block/mmcblk0p28 (null) 0
3 /cache ext4 /dev/block/mmcblk0p30 (null) 0
4 /data ext4 /dev/block/mmcblk0p31 (null) -16384
5 /sdcard vfat /dev/block/mmcblk0p32 (null) 0
6 /external_sd auto /dev/block/mmcblk1p1 /dev/block/mmcblk1 0
W:Unable to get recovery.fstab info for /datadata during fstab generation!
W:Unable to get recovery.fstab info for /emmc during fstab generation!
W:Unable to get recovery.fstab info for /sd-ext during fstab generation!
I:Completed outputting fstab.
I:Processing arguments.
I:Checking arguments.
I:device_recovery_start()
Command: "/sbin/recovery"
ro.boot.hardware=qcom
ro.boot.emmc=true
ro.boot.bootloader=s1
ro.boot.serialno=ZH80004JV8
ro.boot.baseband=msm
ro.serialno=ZH80004JV8
ro.bootmode=unknown
ro.baseband=msm
ro.bootloader=s1
ro.hardware=qcom
ro.revision=0
ro.emmc=0
ro.factorytest=0
ro.secure=0
ro.allow.mock.location=1
ro.debuggable=1
persist.sys.usb.config=adb
ro.build.id=JSS15J
ro.build.display.id=cm_taoshan-eng 4.3 JSS15J eng.varun.chitre15.20130801.154858 test-keys
ro.build.version.incremental=eng.varun.chitre15.20130801.154858
ro.build.version.sdk=18
ro.build.version.codename=REL
ro.build.version.release=4.3
ro.build.date=Thu Aug 1 15:49:28 BST 2013
ro.build.date.utc=0
ro.build.type=eng
ro.build.user=varun.chitre15
ro.build.host=build1
ro.build.tags=test-keys
ro.product.model=taoshan
ro.product.brand=sony
ro.product.name=cm_taoshan
ro.product.device=taoshan
ro.product.board=taoshan
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=sony
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=unknown
ro.build.product=taoshan
ro.build.description=cm_taoshan-eng 4.3 JSS15J eng.varun.chitre15.20130801.154858 test-keys
ro.build.fingerprint=sony/cm_taoshan/taoshan:4.3/JSS15J/eng.varun.chitre15.20130801.154858:eng/test-keys
ro.build.characteristics=default
ro.cm.device=taoshan
ro.rommanager.developerid=cyanogenmod
keyguard.no_require_sim=true
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.clientidbase=android-google
ro.com.android.wifi-watchlist=GoogleGuest
ro.setupwizard.enterprise_mode=1
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=false
ro.cm.version=10.2-20130801-UNOFFICIAL-taoshan
ro.modversion=10.2-20130801-UNOFFICIAL-taoshan
ro.config.ringtone=Orion.ogg
ro.config.notification_sound=Argon.ogg
ro.config.alarm_alert=Hassium.ogg
ro.carrier=unknown
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.adb.qemud=1
ro.kernel.android.checkjni=1
net.bt.name=Android
net.change=net.bt.name
dalvik.vm.stack-trace-file=/data/anr/traces.txt
init.svc.ueventd=running
init.svc.adbd=running
init.svc.recovery=running
I:Checking for extendedcommand...
I:Skipping execution of extendedcommand, file not found...
mount: mounting /dev/block/mmcblk1p1 on /external_sd failed: No such file or directory
Can't mount backup path.
mount: mounting /dev/block/mmcblk1p1 on /external_sd failed: No such file or directory
Error mounting /external_sd!
I:Can't partition non-vfat: auto
I:Can't format unknown volume: /emmc
Click to expand...
Click to collapse
Bump! Anyone?
Weird
jayaura said:
Bump! Anyone?
Click to expand...
Click to collapse
This is weird, no one got a clue ?!
I guess that option is not available to our CWM yet. I couldn't mount it too , even formatted the mem card once. Just place your stuff in INTERNAL STORAGE or just SIDELOAD FROM ADB
I built CWM-based Recovery and this is my install-recovery.sh in /system/etc/
Code:
#!/system/bin/sh
stop
cat /dev/input/event5 > /dev/keycheck &
sleep 3
kill -9 $!
if [ -s /dev/keycheck -o -e /cache/recovery/command ];then
mount -o remount,rw rootfs /
mount -o remount,rw /system
mkdir /tmp
chmod a+rw /dev/tty0
/system/xbin/recovery
else
start
fi
and I got last_log in /cache/recovery/
Code:
Starting recovery on Tue Feb 25 05:05:49 2014
can't open /dev/tty0: No such file or directory
framebuffer: fd 3 (1080 x 1800)
CWM-based Recovery v6.0.3.7
recovery filesystem table
=========================
0 /tmp ramdisk (null) (null) 0
1 /system ext4 /dev/block/mmcblk0p1 (null) 0
2 /cache ext4 /dev/block/mmcblk0p2 (null) 0
3 /data ext4 /dev/block/mmcblk0p3 (null) 0
4 /misc emmc /dev/block/mmcblk0p10 (null) 0
5 /ram0 vfat /dev/block/ram0 (null) 0
W:Unable to get recovery.fstab info for /datadata during fstab generation!
W:Unable to get recovery.fstab info for /emmc during fstab generation!
W:Unable to get recovery.fstab info for /sdcard during fstab generation!
W:Unable to get recovery.fstab info for /sd-ext during fstab generation!
W:Unable to get recovery.fstab info for /external_sd during fstab generation!
I:Completed outputting fstab.
I:Processing arguments.
I:Got arguments from /cache/recovery/command
stat /dev/block/mmcblk0p10 try 1: No such file or directory
stat /dev/block/mmcblk0p10 try 2: No such file or directory
stat /dev/block/mmcblk0p10 try 3: No such file or directory
stat /dev/block/mmcblk0p10 try 4: No such file or directory
stat /dev/block/mmcblk0p10 try 5: No such file or directory
stat /dev/block/mmcblk0p10 try 6: No such file or directory
stat /dev/block/mmcblk0p10 try 7: No such file or directory
stat /dev/block/mmcblk0p10 try 8: No such file or directory
stat /dev/block/mmcblk0p10 try 9: No such file or directory
stat /dev/block/mmcblk0p10 try 10: No such file or directory
failed to stat /dev/block/mmcblk0p10
I:Checking arguments.
Warning: No file_contexts
Warning: No file_contexts
I:device_recovery_start()
Command: "/system/xbin/recovery"
ro.boot.console=ttySAC3
ro.serialno=XXXXXXXXXXXX
ro.bootmode=unknown
ro.baseband=unknown
ro.bootloader=unknown
ro.hardware=mx3
ro.revision=21520
ro.meizu.hardware.version=1
ro.meizu.hardware.nfc=false
ro.meizu.hardware.modem=td-scdma
ro.meizu.hardware.soc=exynos5410
ro.factorytest=0
ro.secure=1
ro.allow.mock.location=0
ro.debuggable=0
persist.sys.usb.config=mtp,adb
init.svc.ueventd=running
ro.crypto.state=unencrypted
ro.crypto.fuse_sdcard=true
init.svc.scripts=stopped
vold.post_fs_data_done=1
ro.build.cta=noncta
ro.build.id=JOP40D
ro.build.display.id=Flyme OS 3.4.1 (A17444)
ro.build.mask.id=4.2.1-17444
ro.build.version.incremental=M35X.Flyme_OS_3.4.1.1390447667
ro.build.version.sdk=17
ro.build.version.codename=REL
ro.build.version.release=4.2.1
ro.build.date=2014... 01... 23... ......... 11:30:59 CST
ro.build.date.utc=1390447859
ro.build.type=user
ro.build.user=flyme
ro.build.host=Flyme-Mz
ro.build.tags=release-keys
ro.product.model=M355
ro.product.brand=Meizu
ro.product.name=meizu_mx3
ro.product.device=mx3
ro.product.board=mx3
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Meizu
ro.product.locale.language=zh
ro.product.locale.region=CN
ro.wifi.channels=
ro.board.platform=exynos5
ro.build.product=mx3
ro.build.description=meizu_mx3-user-17444 4.2.1 JOP40D M35X.Flyme_OS_3.4.1.1390447667 release-keys 3225R1
ro.build.fingerprint=Meizu/meizu_mx3/mx3:4.2.1/JOP40D/M35X.Flyme_OS_3.4.1.1390447667:user/release-keys
ro.build.characteristics=phone
ro.arch=exynos5410
persist.sys.strictmode.visual=0
persist.sys.strictmode.disable=1
persist.demo.hdmirotationlock=false
persist.sys.log-kernel.enable=1
persist.sys.ui.hw=false
ro.hwui.drop_shadow_cache_size=5
ro.hwui.gradient_cache_size=1
ro.hwui.layer_cache_size=40
ro.hwui.path_cache_size=24
ro.hwui.r_buffer_cache_size=4
ro.hwui.text_large_cache_height=1024
ro.hwui.text_large_cache_width=2048
ro.hwui.text_small_cache_height=1024
ro.hwui.text_small_cache_width=1024
ro.hwui.texture_cache_flushrate=0.5
ro.hwui.fbo_cache_size=20
ro.hwui.texture_cache_size=72
net.dns1=8.8.8.8
net.change=net.tcp.buffersize.evdo
net.dns2=8.8.4.4
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.config.ringtone=Flyme_Tune_Dream.ogg
ro.config.notification_sound=VideoRecord.ogg
ro.config.mms_sound=Ripples.ogg
ro.config.email_sound=VideoRecord.ogg
ro.config.calendar_sound=Jump.ogg
ro.config.alarm_alert=Morning_Dew.ogg
ro.carrier=unknown
ro.opengles.version=131072
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=192m
dalvik.vm.heapsize=512m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=512k
dalvik.vm.heapmaxfree=8m
ro.sf.lcd_density=400
persist.sys.log-main.enable=0
persist.sys.log-system.enable=0
persist.sys.log-events.enable=0
persist.sys.log-radio.enable=0
debug.hwui.render_dirty_regions=false
persist.sys.timezone=Asia/Shanghai
persist.sys.meizu.region=cn
persist.sys.meizu.codepage=gbk
ro.meizu.region.enable=true
ro.meizu.contactmsg.auth=false
ro.meizu.customize.pccw=false
ro.meizu.autorecorder=true
ro.meizu.visualvoicemail=true
ro.meizu.permanentkey=false
ro.meizu.setupwizard.flyme=true
ro.meizu.setupwizard.setlang=true
ro.meizu.security=true
ro.meizu.mtpname=MX3
ro.meizu.has_smartbar=true
sys.meizu.m35x.white.config=false
ro.meizu.customize=true
persist.sys.meizu.dim.input=false
sys.meizu.white.config=false
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
persist.sys.meizu.ringer.mute=1
persist.sys.profiler_ms=0
persist.service.bdroid.bdaddr=22:22:fc:03:1b:06
persist.sys.language=zh
persist.sys.country=CN
persist.sys.localevar=
net.tcp.buffersize.default=4094,87380,704512,4096,16384,262144
net.tcp.buffersize.wifi=524288,1048576,2097152,262144,524288,1048576
net.tcp.buffersize.lte=524288,1048576,2097152,262144,524288,1048576
net.tcp.buffersize.umts=4094,87380,1220608,4096,16384,110208
net.tcp.buffersize.hspa=4094,87380,1220608,4096,16384,262144
net.tcp.buffersize.hsupa=4094,87380,1220608,4096,16384,262144
net.tcp.buffersize.hsdpa=4094,87380,1220608,4096,16384,262144
net.tcp.buffersize.hspap=4094,87380,1220608,4096,16384,1220608
net.tcp.buffersize.edge=4093,26280,35040,4096,16384,35040
net.tcp.buffersize.gprs=4092,8760,11680,4096,8760,11680
net.tcp.buffersize.evdo=4094,87380,262144,4096,16384,262144
system_init.startsurfaceflinger=0
init.svc.console=running
init.svc.servicemanager=running
init.svc.vold=running
init.svc.akmd=running
init.svc.setup_fs=stopped
init.svc.pvrsrvctl=stopped
init.svc.netd=running
init.svc.debuggerd=running
init.svc.vchanneld-daemon=running
init.svc.surfaceflinger=stopped
init.svc.zygote=stopped
init.svc.drm=running
init.svc.media=running
init.svc.installd=running
init.svc.flash_recovery=running
init.svc.keystore=running
init.svc.gps-daemon=running
ro.radio.noril=yes
sys.config.virtualpath=yes
init.svc.sdcard=running
init.svc.logcat-main=stopped
init.svc.logcat-system=stopped
init.svc.logcat-radio=stopped
init.svc.logcat-events=stopped
sys.usb.config=mtp,adb
vchanneld.retry.count=0
dev.tty.one=/dev/pts/3
dev.tty.two=/dev/pts/1
dev.tty.second=/dev/pts/2
dev.tty.three=/dev/pts/5
dev.tty.four=
dev.tty.five=/dev/pts/4
vchanneld.status=start
init.svc.ril-daemon=running
ril.ecclist=112,911,999,000,08,110,118,119,120,122
vchanneld.syncatd=start
init.svc.syncatd-daemon=running
service.syncat.status=start
gsm.device.sn=355BBHS2DRKN
gsm.device.psn=68116B00C109
I:Checking for extendedcommand...
I:Skipping execution of extendedcommand, file not found...
How can build a normal recovery?