(Q) Cheesecake. "Long time...Finish in background..."? - Motorola Atrix 2

What info is being sent to and from that causes this and why does a simple reboot reset it? On their end a reboot of my phone shouldn't do anything so what is it? Anything why could change?
Sent from my mb

leifemagnuson said:
What info is being sent to and from that causes this and why does a simple reboot reset it? On their end a reboot of my phone shouldn't do anything so what is it? Anything why could change?
Sent from my mb
Click to expand...
Click to collapse
Someone can perhaps explain this better, but my understanding is this:
You're sending a data packet telling the servers which device you have so it (the server) can look for updates for the device. I've seen this too with Cheesecake, but I'm guessing its just a server that's not up.
Sent from my MB865 using xda premium

Once the finish in background message comes up you have to reboot to get ride of it. All the other variations don't require a reboot. Once you do reboot you reboot you can at it again. So where is it coming from. Our phone or the servers?
Sent from my MB865 using Tapatalk 2

leifemagnuson said:
Once the finish in background message comes up you have to reboot to get ride of it. All the other variations don't require a reboot. Once you do reboot you reboot you can at it again. So where is it coming from. Our phone or the servers?
Sent from my MB865 using Tapatalk 2
Click to expand...
Click to collapse
I've seen the 'finishing checking for updates in background' before, and I click Okay... then either nothing happens or it pops back up with the "no updates are available for your device at this time". Weird that you're having to re-boot. Try uninstalling, re-boot, and re-install Cheesecake again, maybe?
Sent from my MB865 using xda premium

My phone still functions. I just get that message everytime until I reboot. "No update" "update service not available at this time" and "Wi-Fi error" all normal. Once the "long time message" comes IP that is the only one I get until I reboot. Same on lithium and now romulus. I don't restore apps or data after flashing. They are all clean, new installs of cheesecake.
Sent from my MB865 using Tapatalk 2

You shouldn't have to reboot to take care of those. Just select another server and try again.
It just means the server is down.
Sent from my MB865 using xda premium

Read again. The normal messages (wifi, no update, update service not available) are fine. I understand choose another server. Its the long time finish in background one. Once that comes up it always comes up until I reboot. I just did it forty times in a row. Once that particular message starts I must reboot. Then I get the regular ones.
Sent from my MB865 using Tapatalk 2

Which server should we check most
Sent from my MB865 using Tapatalk 2

chiikko561 said:
Which server should we check most
Sent from my MB865 using Tapatalk 2
Click to expand...
Click to collapse
On the actual cheesecake thread it mentions qa and staging were where some were found but recommends checking them all.
Sent from my MB865 using Tapatalk 2

Related

Wifi,Odin, kirles problems

I bought the phone from someone already rooted and ran into some problems.....
I installed the correct drivers for this phone off one of the xda forums for flashing. I also noticed when setting it up the wifi will not obtain the IP Address. It is running firmware 2.2.1
Odin will recognize the phone and start to flash but then get held up at the "setup connection" tried multiple roms
Kies when It is downloading binary files it gets an error
I fallowed all instructions to the letter, I have never ran into this problem in all the phones I have flashed , any ideas would be greatly appreciated
Sent from my TripNiCE ICS sensation using xda premium
As far as the wireless goes, are you absolutely sure you put in the correct network key? Is there a network key? Are you home and can mess with router settings?
Sent from my SGH-T959V using XDA App
Andrew.80 said:
I bought the phone from someone already rooted and ran into some problems.....
I installed the correct drivers for this phone off one of the xda forums for flashing. I also noticed when setting it up the wifi will not obtain the IP Address. It is running firmware 2.2.1
Click to expand...
Click to collapse
The one time I had that problem I just reset my wifi router. If you're using encryption (I hope you are), make sure the settings on the phone match the settings on the wifi router (WPA, WPA2, TKIP/AES, etc.) & that you're using the right pass code.
Odin will recognize the phone and start to flash but then get held up at the "setup connection" tried multiple roms
Click to expand...
Click to collapse
The phone must be in download mode for ODIN to recognize it. Were you able to get it into download mode?
Kies when It is downloading binary files it gets an error
I fallowed all instructions to the letter, I have never ran into this problem in all the phones I have flashed , any ideas would be greatly appreciated
Click to expand...
Click to collapse
If you're wanting to get it updated to Gingerbread, I'd suggest following FBis251's Gingerbread Starter Pack or using one of Bhundven's One-clicks. The latter option only requires that you have Java installed.
Sent from my TripNiCE ICS sensation using xda premium[/QUOTE]
goddi2010 said:
As far as the wireless goes, are you absolutely sure you put in the correct network key? Is there a network key? Are you home and can mess with router settings?
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
Using an open network like mcds wifi and still doesn't work
Sent from my TripNiCE Pyramid using xda premium
stephen_w said:
The one time I had that problem I just reset my wifi router. If you're using encryption (I hope you are), make sure the settings on the phone match the settings on the wifi router (WPA, WPA2, TKIP/AES, etc.) & that you're using the right pass code.
I tried even going to mcds and with wouldn't us open networks either
The phone must be in download mode for ODIN to recognize it. Were you able to get it into download mode?
No will only go into android recovery
If you're wanting to get it updated to Gingerbread, I'd suggest following FBis251's Gingerbread Starter Pack or using one of Bhundven's One-clicks. The latter option only requires that you have Java installed.
Tried both of those and neither worked fallowed them to the t
Sent from my TripNiCE ICS sensation using xda premium
Click to expand...
Click to collapse
[/QUOTE]
Sent from my TripNiCE Pyramid using xda premium
Andrew.80 said:
Using an open network like mcds wifi and still doesn't work
Sent from my TripNiCE Pyramid using xda premium
Click to expand...
Click to collapse
Weird. Have you tried performing a factory data reset on the phone? It couldn't hurt & might clear up some problems.
---------- Post added at 01:14 PM ---------- Previous post was at 01:11 PM ----------
Andrew.80 said:
I tried even going to mcds and with wouldn't us open networks either
Click to expand...
Click to collapse
Factory data reset, maybe.
No will only go into android recovery
Click to expand...
Click to collapse
That's odd. That would prevent ODIN from working for sure. If it's rooted, download and install a terminal emulator from the market. Then open the terminal and issue these commands:
su
reboot download
That should get you into download mode unless something's really hosed.
Tried both of those and neither worked fallowed them to the t
Click to expand...
Click to collapse
That would be due to it not going into download mode. Try what I said above and see if it works
Tried factory reseting didn't work I will try the terminal in a little bit i didnt think about that and I know its rooted cause I used root check basic and super one click to reroot to see if that would work
Sent from my TripNiCE Pyramid using xda premium
Andrew.80 said:
Tried factory reseting didn't work I will try the terminal in a little bit i didnt think about that and I know its rooted cause I used root check basic and super one click to reroot to see if that would work
Sent from my TripNiCE Pyramid using xda premium
Click to expand...
Click to collapse
Cool, let me know how it goes. I'm thinking that if we can get you into download mode that getting you updated to GB might help a lot.
If you're not looking to go that route and want to stay Froyo, you might want to look at GPS Aids in the market. It has a "hard reset" feature that might be of help.
Thank I forgot all about terminal emulator I will mess with it in a min and let u know thanks for the support
Sent from my TripNiCE Pyramid using xda premium
Flashed first thing and got a cell phone with a computer and a yellow triangle with "!" In it is it it bricked ?
Sent from my TripNiCE Pyramid using xda premium
Andrew.80 said:
Flashed first thing and got a cell phone with a computer and a yellow triangle with "!" In it is it it bricked ?
Sent from my TripNiCE Pyramid using xda premium
Click to expand...
Click to collapse
No, you're not bricked. That's another screen that's equivalent to download mode. What are you using to flash (ODIN, Heimdall, CWM)?
Odin
Sent from my HTC Sensation 4G using XDA App
And Odin wont find. It either now
Sent from my HTC Sensation 4G using XDA App
Andrew.80 said:
And Odin wont find. It either now
Sent from my HTC Sensation 4G using XDA App
Click to expand...
Click to collapse
Is it plugged into the same USB port as before? ODIN & Win7 are funny about that some times. If that doesn't help you might have to power it off & back on to get ODIN to see it:
Power off the phone
Unplug the USB cable
Remove the battery
Plug the USB cable into the computer and the phone
Hold down the volume up and volume down keys
While holding those down, re-insert the battery
See if that gets you back into download mode and/or recognized by ODIN. Also make sure you're using ODIN 1.85.
I tried this and couldn't figure out why it won't work
Sent from my HTC Sensation 4G using XDA App
Andrew.80 said:
I tried this and couldn't figure out why it won't work
Sent from my HTC Sensation 4G using XDA App
Click to expand...
Click to collapse
When you tried it, what happened exactly?

Someone update via OTA from the # 1 ICS leak

I popped the notification, update and then between here and now I find that there are chances of my phone is brick. Who here have been updated and have been victorious in that?
Currently the download is in progress, do not know how to stop it.
If you take the ota update from leak 1 it just puts you on official ICS. If you deleted bloat or have a custom rom or anything, it'll just say update failed and I guess you'll have to fxz back.
Sent from my MB865 using xda app-developers app
it's just downloading i think your OK. You should have the option to instal it or not.
Sent from my MB865 using xda premium
He says "install now or install later" but then gave me space appears in 30 in 30 minutes.
Download the FXZ but I'm afraid the brick.
venezuelanboy said:
He says "install now or install later" but then gave me space appears in 30 in 30 minutes.
Download the FXZ but I'm afraid the brick.
Click to expand...
Click to collapse
I think if you go into the cache you can delete it.
Do a search on how to delete ota update.
Sent from my MB865 using xda premium

please help. Phone boot looped

I am on the samsung infuse. SGH-I997 from at&t running gb 2.3.6 my phone is rooted. I don't have it overclocked or underclocked or anything like that. i just went into setting menu and did factory data rest and checked the erase sd card option as welll. My phone will come up to the boot animation i have set and then screen will go dark. I press the screen on button and the boot animation is still on, Like it's just starting again. Then twice now it has started up and let me unlock sim card then goes to the setup wizard which i connect to my wifi after accepting googles terms or whatever. once i put in password I can't see an option for next or back or cancel. I see quit in the top right corner and when I press that to get out of the setup wizard the screen is just plain black. I can see the notification bar and that's it. I can't pull it down. I can't even turn the screen off. Please help me. Should I attempt to go back to stock/rooted gb 2.3.6 via odin??? Please help me out quickly if you can I need this phone for work purposes and have not the means to get another one.
Yes, use odin or heimdall, which ever you are most comfortable with.
Thank you. Worked like a charm. Odin is a lot easier to use I might add
Sent from my SAMSUNG-SGH-I997 using Tapatalk 2
oreo918 said:
Thank you. Worked like a charm. Odin is a lot easier to use I might add
Sent from my SAMSUNG-SGH-I997 using Tapatalk 2
Click to expand...
Click to collapse
no it's not...
How so? I could never get heimdall to work
Sent from my SAMSUNG-SGH-I997 using Tapatalk 2
With heimdal did you click options then install drivers for it?
Sent from my SGH-I997 using xda premium
No I didn't because they were automatically installed when I plugged my phone into the PC
Sent from my SAMSUNG-SGH-I997 using Tapatalk 2
Oh OK just checking I have to reinstall every time I switch to heimdal to Odin.My PC is haunted lol
Sent from my SGH-I997 using xda premium
TJj33p3rz said:
Oh OK just checking I have to reinstall every time I switch to heimdal to Odin.My PC is haunted lol
Sent from my SGH-I997 using xda premium
Click to expand...
Click to collapse
lol that's a hassle.
Sent from my SAMSUNG-SGH-I997 using Tapatalk

[Q] {q} HELP! MORON ATTACK! This thing is like a soap opera

So, yesterday, I had a perfectly functioning, stock 4.1.1/rooted unit.
Got a little frisky and decided to try out Liquid Smooth. Flashed that through recovery (it's a 4.2.1 Beta 2) but forgot to do the bootlocker.
The latest LS has a Bluetooth sound problem that's pretty bad. So, I thought I'd switch over to CM10.1, their 4.2.1 effort.
Well, without the bootlocker in place, you can pretty much guess how that worked out.
So now, I've odin'ed a variety of roms and so forth; no clue what happened to my backup.
My main focus has been what I call the dunce-cap routine, of going back to stock and starting over.
The problem? I did that and now I'm stuck in roaming mode and my calls don't work.
I'm dead without this phone (considering how long I've been working on this, since 8 pm or so yesterday except for a couple of hours of sleep, I might be dead, period.) and I've got to have one functioning. It's so bad that I'm considering just trashing it and buying another one, even thought THAT would hurt.
Almost everything I try winds up either getting the yellow triangle or the odin fail.
Now, thanks to some help I've gotten here that focused me into understanding this total screw up is MY fault completely, I believe I know what has to be done.
The plan was to go back to stock, root and DO THE DAMNED BOOTLOCKER, then go back into CM10.1 and make some changes in subscribing to CDMA or something (don't have that in front of me this second) to get the phone part of the phone operational but I can't get there.
In the guide here I have completed step 1, flashing the factory image.
The next step is blowing me up. I have used the file I have for the Recovery: CWM6023TouchVZW.tar.md5.tar, maybe 4 times.
NOW when I try it, odin fails and the phone tells me "secure check fail : recovery."
And help would be appreciated. Before I feed this thing to my Doberman Cavalier Spaniel. Or something.
Have you tried Odin with a completely stock rom?
Sent from my SCH-I535 using xda app-developers app
Jarredw said:
Have you tried Odin with a completely stock rom?
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Yup. Completely stock rom is installed. The next step was installing the recovery... and using a file that I had used before, that's where I'm running into the problem of the secure check fail.
That very file HAS worked before, 3 or 4 times with no problem.
Why does the file end in ".tar.md5.tar"? It's supposed to end in ".tar.md5" Since owning this phone, I've never seen a file with ".tar" twice in the file name.
Sent from my SCH-I535 using xda app-developers app
kage87z said:
Yup. Completely stock rom is installed. The next step was installing the recovery... and using a file that I had used before, that's where I'm running into the problem of the secure check fail.
That very file HAS worked before, 3 or 4 times with no problem.
Click to expand...
Click to collapse
Disregard that, I'll be back in a minute with some help. I'm pretty sure the new boot chain will not except custom recovery. Try this guide.
http://forum.xda-developers.com/showthread.php?p=35418324
Sent from my VS920 4G using xda app-developers app
If you were able to Odin a stock rom then Odin a stock rom that has been pre rooted and then just use ez recovery from the play store to flash cwm
Sent from my SCH-I535 using xda app-developers app
kintwofan said:
Disregard that, I'll be back in a minute with some help. I'm pretty sure the new boot chain will not except custom recovery. Try this guide.
http://forum.xda-developers.com/showthread.php?p=35418324
Sent from my VS920 4G using xda app-developers app
Click to expand...
Click to collapse
OK.... working this.
Looks good. Booted into the rom with no warnings... It says "pass."
Jarredw said:
If you were able to Odin a stock rom then Odin a stock rom that has been pre rooted and then just use ez recovery from the play store to flash cwm
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
this was going to be my suggestion also.
ddurandSGS3 said:
this was going to be my suggestion also.
Click to expand...
Click to collapse
Any suggestions as to where I might get one of those?
The 5 minute time limit can be a PITA.
SlimSnoopOS said:
Why does the file end in ".tar.md5.tar"? It's supposed to end in ".tar.md5" Since owning this phone, I've never seen a file with ".tar" twice in the file name.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
The problem is that when I unzip it, I don't get an md5 file, I get an "image" file of some sort.
kage87z said:
Any suggestions as to where I might get one of those?
The 5 minute time limit can be a PITA.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1974114
Sent from my SCH-I535 using xda app-developers app
Update: OK... have gone through the guide which went brilliantly.
Now, do I just boot this thing into recovery and flash the CM10.1?
Is there anything I've overlooked? Anything else I need to do?
And do I do the factory reset/wipe dalvik and the rest before, or after?
I presume I have to use ezlock to unlock the bootloader again after this, right?
No, you still need to unlock bootloader and backup your IMEI. You may want to do quite a bit of reading, CM 10 is not as easy to fix some of the potential problems that you could possibly encounter.
I am not hating on them, but don't think it is as simple as one of the TW ROMS.
HHF2 said:
No, you still need to unlock bootloader and backup your IMEI. You may want to do quite a bit of reading, CM 10 is not as easy to fix some of the potential problems that you could possibly encounter.
I am not hating on them, but don't think it is as simple as one of the TW ROMS.
Click to expand...
Click to collapse
When I try this method to back up the IMEI it doesn't do anything after entering the *#7284# and if I hit the phone, it just sends me to a Verizon intercept operator.
The only reason I'm trying to get into a 4.2.1 ROM again was this:
http://forum.xda-developers.com/showpost.php?p=36396278&postcount=5
Just flash cm10.1 and fix your mobile settings. CDMA subscription > ruim/sim and toggle airplane mode.
This isn't the first time someone has had this problem.
Sent from my SCH-I535 using xda app-developers app
4.1.1 doesn't have this capability, and up to now, I haven't seen any other way to address the original issue.
Of you followed the guide I linked you are unlocked with cwm so boot into recovery wipe caches and reset and flash cm10.1 and gapps. First verify you are unlocked
Sent from my VS920 4G using xda app-developers app
kintwofan said:
Of you followed the guide I linked you are unlocked with cwm so boot into recovery wipe caches and reset and flash cm10.1 and gapps. First verify you are unlocked
Sent from my VS920 4G using xda app-developers app
Click to expand...
Click to collapse
OK, using EZLock I unlocked it successfully, but the status in EZLock is still listed as "unknown."
kage87z said:
The only reason I'm trying to get into a 4.2.1 ROM again was this:
http://forum.xda-developers.com/showpost.php?p=36396278&postcount=5
Just flash cm10.1 and fix your mobile settings. CDMA subscription > ruim/sim and toggle airplane mode.
This isn't the first time someone has had this problem.
Sent from my SCH-I535 using xda app-developers app
4.1.1 doesn't have this capability, and up to now, I haven't seen any other way to address the original issue.
Click to expand...
Click to collapse
If you can't figure it out you can pm me
Sent from my SCH-I535 using xda app-developers app
kage87z said:
OK, using EZLock I unlocked it successfully, but the status in EZLock is still listed as "unknown."
Click to expand...
Click to collapse
Just power on your phone if Samsung flashes very fast you're unlocked
Sent from my VS920 4G using xda app-developers app
kintwofan said:
Just power on your phone if Samsung flashes very fast you're unlocked
Sent from my VS920 4G using xda app-developers app
Click to expand...
Click to collapse
OK... it did... I'm going for it.
Stuck on "waiting for network."
Used the four taps method to get past it
I have no APN listed..
kage87z said:
OK... it did... I'm going for it.
Stuck on "waiting for network."
Used the four taps method to get past it
I have no APN listed..
Click to expand...
Click to collapse
Have you changed the subscription type to sim and toggled airplane mode
Sent from my VS920 4G using xda app-developers app

Encryption no longer working

I realized that this should probably go in the CleanROM thread, but as a newly-registered member I don't have the ability to post there yet
My company requires us to encrypt if we want to sync our work e-mail/calendar (Exchange ActiveSync). However, after unlocking the bootloader, rooting, S-OFF, installing TWRP 2.3.3.1, and then installing CleanROM 6.5 (lots of fun yesterday ), the encryption no longer works.
Everything seems to go as normal until the phone reboots and prompts for the password/PIN. I enter the PIN, but then the phone gets stuck on the HTC One boot screen (I didn't have the patience to wait more than an hour though). So I reboot into TWRP, do a factory reset (which fails), and reboot. Once Android is back up (with everything reset), it complains that the phone storage is corrupted, and allows me to format it.
Not sure if there are any known issues regarding encryption, so please let me know if any of you have ideas as to what is wrong. :fingers-crossed:
I experienced this once as well. Never tried encrypting it again after and never discovered the root of the issue.
Sent from my One X using xda app-developers app
exad said:
I experienced this once as well. Never tried encrypting it again after and never discovered the root of the issue.
Sent from my One X using xda app-developers app
Click to expand...
Click to collapse
That is unfortunate I spent several hours yesterday encrypting, resetting, encrypting again, and resetting again... I did some research and tried this solution, which unfortunately didn't work. Not sure if it is an issue with CleanROM or TWRP or ...?
I am going to test that method now using cm10.1 based rom. See what happens. Ill report here.
Bah, gotta charge up my phone.
Sent from my Sony Tablet S using xda app-developers app
exad said:
I am going to test that method now using cm10.1 based rom. See what happens. Ill report here.
Bah, gotta charge up my phone.
Sent from my Sony Tablet S using xda app-developers app
Click to expand...
Click to collapse
Cool, let me know how that goes Do you use CWM or TWRP recovery?
Cwm is not worth using on this phone. I think encryption is broken on cm10.1 lol I start the encryption process and nothing ever happens.
Sent from my One X using xda app-developers app
exad said:
Cwm is not worth using on this phone. I think encryption is broken on cm10.1 lol I start the encryption process and nothing ever happens.
Sent from my One X using xda app-developers app
Click to expand...
Click to collapse
Hmm. How so the encryption doesn't start at all? I'm using a Sense-based ROM, so the issue you are experiencing is likely different than mine. My phone goes through the encryption process (not sure if something goes wrong there), and then Android fails to load after I enter the PIN and decrypt.
I have an important phone call I need to take today, so I didn't want to mess around with my phone too much last night. I'll experiment more tonight and see if I can find a solution. :fingers-crossed:
Im thinking its not supported for the one x. It stays on the encryption process screen for hours and nothing ever happens. Im downloading cleanrom now
Sent from my Sony Tablet S using xda app-developers app
exad said:
Im thinking its not supported for the one x. It stays on the encryption process screen for hours and nothing ever happens. Im downloading cleanrom now
Sent from my Sony Tablet S using xda app-developers app
Click to expand...
Click to collapse
Ah. Sounds like I'll have better luck trying to get it to work on a Sense-based ROM.
I plan to try this tonight after work: http://forum.xda-developers.com/showpost.php?p=41614856&postcount=620
Encryption procedure:
1.Make a full backup in TWRP
2.Restore your backup - This seemingly odd step will ensure a footer is allocated at the end of your data partition for encryption data.
3.Install a CM build equal to or newer than 20130516 and wipe Dalvik cache
4.Reboot and let phone battery charge to 100%
5.Turn on Airplane mode
6.Settings > Security > Encrypt phone
Be patient, your screen may go black for a couple minutes without indication of anything occurring before a reboot occurs and encryption progress is displayed.
Click to expand...
Click to collapse
Oooo lemme try that. This rom is based on cm so may work.
Sent from my One X using xda app-developers app
exad said:
Oooo lemme try that. This rom is based on cm so may work.
Sent from my One X using xda app-developers app
Click to expand...
Click to collapse
Are you currently using TWRP 2.5.0.0? I tried it briefly, ran into issues with it wiping the internal sdcard, and then just reverted back to 2.3.3.1.
Yeah I couldnt get it to work on pacman rom but I just flashed cleanrom and the encryption process is going smooth. No problems at all. Im also on twrp 2.3.3.1
Its known that twrp 2.4.0+ has issues.
Sent from my Sony Tablet S using xda app-developers app
exad said:
Yeah I couldnt get it to work on pacman rom but I just flashed cleanrom and the encryption process is going smooth. No problems at all. Im also on twrp 2.3.3.1
Its known that twrp 2.4.0+ has issues.
Sent from my Sony Tablet S using xda app-developers app
Click to expand...
Click to collapse
Sweet! You successfully encrypted and were able to unlock/decrypt the device on reboot? Did you follow the procedure I quoted from the other thread?
I'm way too excited to be at work now... I want to go home and try this myself!
Its still encrypting lol. Dont get all worked up yet. When its done I will post again. I didnt do anything special. I just flashed cleanrom and tried to encrypt to try and recreate your issue.
Sent from my Sony Tablet S using xda app-developers app
---------- Post added at 08:00 PM ---------- Previous post was at 07:14 PM ----------
Im stuck at 33% it seems. Been over 2 hours.
Found this thread. http://forum.xda-developers.com/showthread.php?t=2047944
Odd.
Im gonna keep trying.
Sent from my Sony Tablet S using xda app-developers app
exad said:
Its still encrypting lol. Dont get all worked up yet. When its done I will post again. I didnt do anything special. I just flashed cleanrom and tried to encrypt to try and recreate your issue.
Sent from my Sony Tablet S using xda app-developers app
---------- Post added at 08:00 PM ---------- Previous post was at 07:14 PM ----------
Im stuck at 33% it seems. Been over 2 hours.
Found this thread. http://forum.xda-developers.com/showthread.php?t=2047944
Odd.
Im gonna keep trying.
Sent from my Sony Tablet S using xda app-developers app
Click to expand...
Click to collapse
33%? I don't think it displayed the encryption progress when I was trying to encrypt over the weekend. It just showed the green Android puzzle image for a while as it encrypted, then rebooted and prompted me to enter my PIN.
I'll try again tonight.
Still getting the same result... and no progress display. Will keep searching for a solution... :fingers-crossed:
watameron said:
Still getting the same result... and no progress display. Will keep searching for a solution... :fingers-crossed:
Click to expand...
Click to collapse
I am also running into this issue with encryption on CR6.5. I have attempted to do the following:
1) Setting up encryption as a part of setting up an exchange account
2) Setting up encryption before any accounts have been set up
3) Following the steps in post #9
In each case, I've seen the following:
I set up a PIN
I follow all of the prompts to enable encryption
Click Encrypt
The green robot image shows briefly
The system boot animation shows (this show maybe 3-5 minutes)
The system reboots into airplane mode
I am prompted to enter my PIN to decrypt
The boot animation displays again
... and it just continues to show the animation
I never saw any indication of the progress of the encryption which I was used to seeing previously.
ednpub said:
I am also running into this issue with encryption on CR6.5. I have attempted to do the following:
1) Setting up encryption as a part of setting up an exchange account
2) Setting up encryption before any accounts have been set up
3) Following the steps in post #9
In each case, I've seen the following:
I set up a PIN
I follow all of the prompts to enable encryption
Click Encrypt
The green robot image shows briefly
The system boot animation shows (this show maybe 3-5 minutes)
The system reboots into airplane mode
I am prompted to enter my PIN to decrypt
The boot animation displays again
... and it just continues to show the animation
I never saw any indication of the progress of the encryption which I was used to seeing previously.
Click to expand...
Click to collapse
That is exactly what I am seeing. I might just revert back to stock until a fix is discovered.
Sadly, I went back to the RUU and am now having the same problem. So, I doubt this has something to do with CR at all. If you have the same experience, then we should probably update the title of this thread to be more generic.
I am pretty sure its the unlocked bootloader.
Sent from my One X using xda app-developers app

Categories

Resources