ever since I upgraded to gingerbread 2.3.3 .
my phone switches between charge and usb selection . then fails to charge at all
Sent from my SGH-T959V using XDA
stan3723 said:
ever since I upgraded to gingerbread 2.3.3 .
my phone switches between charge and usb selection . then fails to charge at all
Sent from my SGH-T959V using XDA
Click to expand...
Click to collapse
Please fill in the following fields.
ROM:
Rooted: Y/N
Are you trying to charge via the wall charger or a USB port on your computer?
Related
Folks,
with custom ROMs based on 2.3.4 I experienced that I can no longer connect my Sensation via USB harddrive mode to my car's USB.
It worked with stock ROM 2.3.3, even though I had to deactivate USB debugging and turn it on again...
Yesterday I had the time to cross check:
- restored my stock ROM 2.3.3 NAND et voila: USB connection to car is working
- installed 2.3.4 OTA (Vodafone DE): USB connection to car not working...
Connection via USB to PC is working without any problems...
Anyone else experiencing probs here?
(my car is a BMW with the latest navigation system btw)
++ EDIT ++
Problem solved with Pyramid3D 7.2.0 ROM based on 2.3.5
See post 11 in this thread
- mwie -
mwie said:
Folks,
with custom ROMs based on 2.3.4 I experienced that I can no longer connect my Sensation via USB harddrive mode to my car's USB.
It worked with stock ROM 2.3.3, even though I had to deactivate USB debugging and turn it on again...
Yesterday I had the time to cross check:
- restored my stock ROM 2.3.3 NAND et voila: USB connection to car is working
- installed 2.3.4 OTA (Vodafone DE): USB connection to car not working...
Connection via USB to PC is working without any problems...
Anyone else experiencing probs here?
(my car is a BMW with the latest navigation system btw)
- mwie -
Click to expand...
Click to collapse
have u tried disabling the usb debugging mode under the settings, aaplications, developement
biojo said:
have u tried disabling the usb debugging mode under the settings, aaplications, developement
Click to expand...
Click to collapse
Yep!
With 2.3.3 I had either to disable it when it was enabled or vice-versa to get it running... but it ran!
mwie said:
Yep!
With 2.3.3 I had either to disable it when it was enabled or vice-versa to get it running... but it ran!
Click to expand...
Click to collapse
What about disk mode?
Sent from my HTC Glacier using xda premium
Phateless said:
What about disk mode?
Sent from my HTC Glacier using xda premium
Click to expand...
Click to collapse
You mean if I did select disk mode when pluggin the cable in...?
Dude, sure I did!!
there was a issue with with non stock kernal, maybe u need to update to latest, alternativly there was a app listed in mikes rom, to over come the problem
I am on pure stock...
Using a non-stock kernel... Maybe an option... But browsing through the threads I didn't find anything related to this issue - remember, harddisk mode with PC is working.
sent from XDA App on HTC Sensation
mwie said:
You mean if I did select disk mode when pluggin the cable in...?
Dude, sure I did!!
Click to expand...
Click to collapse
So you tried all the modes. Weird...
Did you have to do any configuring on your HU to get it to recognize the phone the first time?
Maybe clear those configurations on the HU and start over?
Sent from my HTC Glacier using xda premium
Yep, tried everything possible...
No config needed on car, plug-in and off it went with 2.3.3 - just toggle USB debugging on or off in phone...
sent from XDA App on HTC Sensation
mwie said:
Yep, tried everything possible...
No config needed on car, plug-in and off it went with 2.3.3 - just toggle USB debugging on or off in phone...
sent from XDA App on HTC Sensation
Click to expand...
Click to collapse
Weird....
Sent from my HTC Glacier using xda premium
Phateless said:
Weird....
Sent from my HTC Glacier using xda premium
Click to expand...
Click to collapse
Yes... and still driving me crazy!
Will give P3D ROM based on 2.3.5 a try...
++ EDIT ++
Pyramid3D ROM 7.2.0 installed
>> ABLE to connect with my car in disk mode again!!
This time even without switching debugging on or off
Hope it stays this way!!
Dies anyone know which system apk the USB disk Feature is in?
Would try to compare 2.3.4 with 2.3.5...
But maybe it's a kernel issue as well!?
sent from XDA App on HTC Sensation
hi guy
i used helly bean build 20.8 but it don recognize usb cable when i plug
it dont happen when using other rom
please help me
noone.dk01 said:
hi guy
i used helly bean build 20.8 but it don recognize usb cable when i plug
it dont happen when using other rom
please help me
Click to expand...
Click to collapse
I have a similar problem, but not as bad, my laptop at home running win7 starter recognizes my phone but my pc at work running win7 ultimate will not...
Maybe try nexus drivers.
Sent from my SGH-I897 using xda premium
If that doesn't fix it, there are some more options available in the "Captivate Connection Issues" thread.
Can we ENABLE USB OTG on our Photon Q
I want to reading USB Drive on Photon Q, like on my Mini Pro
[email protected] said:
Can we ENABLE USB OTG on our Photon Q
I want to reading USB Drive on Photon Q, like on my Mini Pro
Click to expand...
Click to collapse
I have the same question im thinking of buying a Photon Q
Im also really interested in how you think the photon Q compares to the best phone iv ever had (the mini pro)
I am running cm 10.2 it works fine.
Sent from my XT897 using XDA Premium 4 mobile app
Can anyone confirm this works with the stock Jelly Bean ROM?
Would prefer not to waste the money on an unneeded cable if it doesn't.
rbeavers said:
I am running cm 10.2 it works fine.
Sent from my XT897 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Its possible then :good: thanks for confirming
Coucher said:
Can anyone confirm this works with the stock Jelly Bean ROM?
Would prefer not to waste the money on an unneeded cable if it doesn't.
Click to expand...
Click to collapse
It is working on stock JellyBean. But for me only 1 of 10 USB drives is working. There is somewhere thread with more info.
Is it a voltage problem? Did the leds light up on the nonworking thumb drives?
I use two USB3 8 & 16 gigs one fat32 and the other nfts.
Sent from my XT897 using XDA Premium 4 mobile app
The stock firmware is set up to mount external USB disks that are connected via external USB hub.
For CM, I've made a change so it works when connected straight via OTG cable - https://github.com/razrqcom-dev-tea...mmit/cd3c5915f646c6ff34771d0ba39209db1911c130
So on stock, the few USB disks that work without additional USB hub between the phone and the USB disk are the ones that implement their own internal USB hub.
Hi everybody
I've spikelabs specter g 4.1.2 rom with ferakernel jb v4 unlocked bootloader
Every timd I connect the charger the phone becomes laggy and very slow especially the keyboard..
Why does this happen and is there any way to solvs this?
I also can't charge the phone while it's off..if I connect the charger while the mobile is off it boots into flash mode "green led"
Thanks in advance
Sent from my X10i using xda app-developers app
I want to flash a newer OS on my Infuse. It currently has 2.2.1 None of my computers detects the phone being plugged in to it. Is there any way around this?
You need to install the usb drivers, you can search for them here on XDA or you can go to the Samsung support website.
Sent from my SAMSUNG-SM-G730A using XDA Premium 4 mobile app
Already have drivers
I already have the drivers installed on all my computers. It works great with my Galaxy S2. Absolutely nothing happens when I plug my Infuse into a computer other than I get a menu on the phone asking what mode to go into. The computers see nothing.
It see no device in the device manager?
Sent from my XT907 using xda app-developers app
influ searsyu
mrkhigh said:
It see no device in the device manager?
Sent from my XT907 using xda app-developers app
Click to expand...
Click to collapse
no, the computer makes no attempt to load any drivers when I plug the infuse in.
hotdad3371 said:
I want to flash a newer OS on my Infuse. It currently has 2.2.1 None of my computers detects the phone being plugged in to it. Is there any way around this?
Click to expand...
Click to collapse
I have the same problem with any generic cables. Only the OEM cables seem to work for anything other than charging - I've used both old blackberry and samsung cables.