Olá mundo!
Long time lurker here on XDA. This is my initial attempt on a ROM I originally built for personal use. I ended up enjoying the final product so much that I have decided to share it with the rest of you here on XDA.
Key features:
Built based on Entropy's latest build as of 06/27/12 - Thank you Entropy for your insight and words of wisdom.
OC/UV 1.6 ghz Kernel based on Entropy's/JT1134/bedwas source tree and netarchy/LinuxBozo CM7 code. Thank you Entropy, JT1134, netarchy, bedwa, and anyone else I might have missed.
A few add-ons from SGSIII leaked firmware (Launcher + Wallpaper + *more to come*) Thank you froilson for Launcher MOD.
Voodoo Sound and Screen - Thank you Supercurio, you are a true inspiration to me.
Voltage Control OC/UV - Thank you darek.xan
Work in progress:
Core base stability, specially on kernel frequency code.
Full tutorial for building both base and kernel from source on Ubuntu 12.04.
Recruit testers/helpers. Could use major assistance all around.
*Section bellow shamelessly borrowed from Entropy's original [Firmware][ICS]UNOFFICIAL CM9 post - ALL CREDIT GOES TO HIM as stated previously*
What works:
Calls
GPS
Sound
Video playback
What is not working:
TV Output - MHL
Partially working:
Camera (flash is flaky - if it's not working, change its settings in the Camera app and it may start working)
Car dock audio (possibly desk dock too, untested) - Some issues with ringtone playback when docked - This is native dock audio, not using the Car Dock Redirector app workaround. Thanks go to StevenHarperUK of the GT-I9100 community for reworking CM9's dock audio code to permit this to work.
Wifi - It frequently loses connection when the device is asleep. Most likely needs some SDHCI driver tweaks to match the N7000 wifi driver.
Wifi Direct - A little glitchy but mostly working with I777/N7000. Won't talk to a P7510 (Tab 10.1) though.
Bluetooth - A2DP (music) and SCO (call audio) now works. However BT power management (LPM) is currently disabled, so BT may eat your battery when on.
Known issues:
SetCPU seems to be unable to set the minimum frequency to 100 MHz.
Facebook contact sync has been blocked by Google in ICS - this is universal to ICS on all devices I'm aware of. Facebook got what they deserved here.
Installation instructions-from a Gingerbread firmware with "red CWM":
Place this release and an ICS gapps release on your SD card.
Flash this ZIP in CWM
Reboot - you will get stuck at the Samsung screen
Reboot to recovery again using the three-finger salute - hold down VolUp+VolDn+Power until the device reboots, release Power after the reboot, continue holding VolUp+VolDn
Go to Mounts and Storage and format: system, data, cache
Flash this ZIP a second time, then flash gapps
Reboot and enjoy
Download:
http://d-h.st/uy6- 6/29/2012 build
http://d-h.st/BwP- 6/28/2012 build
http://d-h.st/Fei - 6/22/2012 build
Down - 6/14/2012 build
http://d-h.st/vHo - 6/08/2012 build
http://d-h.st/31Z - 6/07/2012 build
http://d-h.st/uEh - 6/04/2012 build Thanks to Bigjoe2679
"Beta" Galaxy S3 pack by smalldookie - http://www.mrmad.net/samsung-addon-packet-cm9-i9000-im-sgs3-look-2105
Screenshot from Galaxy S3 Pack - Thank you MG2195
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
About me: I am a broke college student, and English is my secondary language.
Please hit "Thanks" if you enjoyed my work or feel free to donate to my college fund by clicking on the can below!
Anyone I have forgotten to mention feel free to drop me a note and I will update the OP accordingly. Thank You everyone at XDA and may god bless you all!
Change Log
06/29/12
Updated ROM base to Entropy's latest source changes for proper camera Auto Flash.
Removed all traces of SGS3.
06/28/12
Updated ROM base to Entropy's 06/27/12 build to reflect changes to BT stack. *See Entropy's thread for more information.
Removed TouchWiz until more stable release.
Removed default CM9 Wallpaper Apk, added SG3 Apk.
06/22/12
Updated ROM base to Entropy's 06/20/12 build - Bluetooth support brought up to CM7 levels (Audio is still broken), Wifi Direct support and other misc CM9 upstream changes. *See Entropy's cm9 thread for more details. Thank you Entropy.*
Added Trebuchet as optional launcher in addition to GS3 TouchWiz.
Experimental newly compiled kernel 16-14-12-8-4-2-1 frequency.
Kernel changes - Reverted BFQ scheduler and UV frequency. Added test Kernel patch. *Need Feedback*
06/14/12
Experimental newly compiled kernel same 16-14-12-8-4-2-1 frequency- Cleaned up code on UV a bit and 100mhz now set to 900mV.
Added BFQ kernel scheduler - BFQ now added as an option, snappier performance overall (or placebo?) *Need more feedback.*
6/08/12
Added experimental new kernel - OC 1.4 - 1.6ghz and tweaked charging freq scaling to match new code. (Use it at your own risk)
Reverted GPU OC as it did not seem to improve performance.
Added Beta ADD ON Galaxy S3 Pack - Thank you smalldookie and be sure to support the developer. Follow his work here: http://forum.xda-developers.com/showthread.php?t=1667051
6/07/12
Added preliminary code for OC 1.6ghz based on bedwa's infused kernel source tree. (Experimental and use it at your own risk, but it should be stable. It passed battery of tests including Quadrant and CPU stress test. After 20 runs, no crashes to date. *Need more testers and Feedback. - Thank you bedwa
Added SGS3 Wallpaper APK app including stock wallpapers.
6/03/12:
Initial release
OC/UV 1400 ghz Kernel based on Entropy's/JT1134 work source tree and netarchy/LinuxBozo CM7 code.
A few add-ons from SGSIII leaked firmware (Launcher + Wallpaper + *more to come*)
Voodoo Sound and Screen
Voltage Control OC/UV -
FAQ
MMS Does not seem to function properly?
Change your apn mms proxy to : 66.209.11.32
(Thank you Dapk1nmasta for the tip.)
Reserved for tutorial.
Nice, bro. First.
Nice work, jblparisi. I know you've been putting a lot of time into this.
Let me be the first to say thank you.
vietux said:
Nice, bro. First.
Nice work, jblparisi. I know you've been putting a lot of time into this.
Let me be the first to say thank you.
Click to expand...
Click to collapse
Right back to you. Thanks!
I'll be trying this out. Been wanting OC. Nice work!
Sent from my SAMSUNG-SGH-I997 using XDA
dustinhayes93 said:
Not trying to sound like a d*** but may wanna give credit of that stuff ya copy from entropy's thread. Its bassicly word from word. LOL. But ill be trying this out. Been wanting OC. Nice work!
Sent from my SAMSUNG-SGH-I997 using XDA
Click to expand...
Click to collapse
I had already done that from the beginning. All credit goes to him as I have already stated before. Without his words It would have took me months to catch to the level I am currently working on. I wish I was half the developer these guys are, honestly.
Welcome to the neighborhood!
NunHugger said:
Welcome to the neighborhood!
Click to expand...
Click to collapse
Thank you - Obrigado!
thank you jb i will to test it right now
karlozgck said:
thank you jb i will to test it right now
Click to expand...
Click to collapse
Thanks.
I am considering reverting back to Zeam launcher. Seems like a better match for the outdated hardware on the Infuse.
Sent from my SGH-I997 using XDA
jblparisi said:
Thanks.
I am considering reverting back to Zeam launcher. Seems like a better match for the outdated hardware on the Infuse.
Sent from my SGH-I997 using XDA
Click to expand...
Click to collapse
Outdated... No.
Other than that glad to see another dev around.. Keep up the good work man.
Sent from my SAMSUNG-SGH-I997 using Tapatalk 2
Makes me wish I understood UV or at least what settings to use! Running good so far anyway
Sent from XDA Premium on my Infuse 3.5G
jblparisi said:
Thanks.
I am considering reverting back to Zeam launcher. Seems like a better match for the outdated hardware on the Infuse.
Sent from my SGH-I997 using XDA
Click to expand...
Click to collapse
I'm not a big fan of zeam launcher as it has a home button on the app drawer. Holo launcher is pretty snapy and apex is fast too
Sent from my SAMSUNG-SGH-I997 using xda premium
joe3681 said:
Makes me wish I understood UV or at least what settings to use! Running good so far anyway
Sent from XDA Premium on my Infuse 3.5G
Click to expand...
Click to collapse
My settings are:
1200mhz-1100mv
800mhz-1000mv
400mhz- 850mv
200mhz- 775mv
100mhz- 775mv
Sent from my SGH-I997 using xda premium
Any feedback on this yet? Hows she running? Hows the overclocking work? Anything?
Can someone post the kernel by its self?
Sent from my SGH-I997 using xda premium
goobieracing said:
Can someone post the kernel by its self?
Sent from my SGH-I997 using xda premium
Click to expand...
Click to collapse
I could... or you could just extract it off the ROM yourself, but what would be the purpose of that? It will likely not work on any other CM9 based ROM unless it is based on Entropy's 05/27/12 build.
Every time one of these new ICS roms gets posted, I get super excited for a split second, thinking maybe BT has been fixed. Silly me
Related
The Family Proudly Presents:
Melchizedek
For Inspire 4G or Desire HD
*DISCLAIMER*
You do this knowing all risks involved with flashing a ROM.
Neither I nor any member of The Collective is responsible for any permanent damage.
This is considered an Alpha release so please treat it like an Alpha and expect bugs and some things not to work properly.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
*Read This Entire Post Completely Then Read it Again*
[/CENTER]
NOT WORKING:
-Camcorder
-Other minor bugs
*WARNING*
-Do not ask for support or complain that something doesn't work because YOU restore apps and/or data and/or system settings from Titanium Backup or Mybackup etc.
-If you would like a CFS version grab the one from the OTA .
-Do Not ask for ETA on the next release
-Do Not ask for help if you didn't full wipe before coming from a different rom!
-Do Not Flame other users in my thread! Read the Rules
-Please do not post bug reports unless you are specifically asked by a member of our team to test something and report back. We know some things aren't fully functioning.
-Do not ask for features unless I post a question asking what features people would like. (which will be seldom)
-Enjoy the rom and remember it is ALPHA Quality and sure to contain bugs
All credits goes to existz, LorDClockan, twistedumbrella, dh.harald, CM crew, Evervolv, synergye, AOKP team, flappjaxxx, and all others that have contributed to this extension of our community!
What is it you ask?
-A Serious Work in Progress!
-This is compiled from from source from AospX by existz
-Redemption Tools app with OTA features
-Custom Camera Launcher that launches Angel Camera for stills and VideoCam Illusion for Videos
(You need a player like Rock Player Lite or MXPlayer to Play the Videos)
-OTA updates.
-Andrev OC built in with CPU Tweak for custom Sleep/Wake Profiles
-Custom Preset CPU OC profiles and preset UV settings
-Latest Gapps for ICS and libs
-Apex Launcher
-ES File Manager
-Titanium Backup
-QuickPic
-Palringo chat app - team chat room is: theandroidcollective sign in with XDA name if at all possible! (Gotham theme by Trevino07 and Zelendel)
-Tons of Features in Collective Tools in the Settings Menu
-Ability to download and install Nova Launcher and others along side the default launcher.
-Again Please keep in mind that this is an Alpha Release. It is very stable for every day use but will contain bugs
**included kernel in this build is stock aospX. The custom profiles from tools and the clock steps in cpu tweak will not work. If you are using included kernel, please use AX Control for setting clock speeds and governors. The LorDMod kernels, found in the OTA are compatible with Tools and CPU Tweak. We are working on going back to our own custom kernel, so bear with us**
Download Melchizedek
Melchizedek Q&A
How To:
1. Back Up your Stuff.
2. Wipe Data/ Factory Reset
3. Wipe Cache and Dalvik Cache
4. Flash .zip in recovery
5. Allow full first boot, reboot
6. Sign in to Market to add account.
7. Open Redemption Tools from Settings Menu and make it your own.
8. Rate the thread and hit some "Thanks" buttons!
Video by Flow-Wolf
Custom OC Profiles & Undervolt Settings:
Sloth - Sleep = conservative 122/122 + Wake = ondemand 122/921
flappjaxxx - Sleep = conservative 122/122 + Wake = ondemand 122/1152
rasroy - Sleep = conservative 122/384 + Wake = ondemandX 122/1382
Nun - Sleep = conservative 230/384 + Wake = ondemand 230/1228
Lone Star - Sleep = conservative 122/122 + Wake = ondemandX 230/1305
In the CPU Tab hit your Menu button and you will see CPU Tweak.
CPU Tweak is exactly that, it will allow you to fully customize your Sleep and Wake Governors and Clock Speeds.
*Warning* Do be careful with this as using incorrect settings may have ill effects.
Do not use these setting unless you know what you are doing.
Undervolting:
Lite Undervolt = -25mV
Standard Undervolt = -50mV
Aggressive Undervolt = -75mV
Credits and Thanks (in no particular order)
existz
LorDClockan
Zelendel
flappjaxxx
cwhitney24
Trevino07
joedeuce
dh.harald
twistedumbrella
CM crew
Evervolv
synergye
AOKP team
Nunhugger
Johnsondr80
alienmind
killersloth
ashies7
Gio22
Tx Redneck
mrhaley30705
Pick A Name
studacris
JoeDV
Sybregunne - For giving us Andrev OC and Daemon Controller
AngelDeath - For awesome GPS work
crypted- For awesome GPS Work
Tsjoklat for modded market
Flow-Wolf for video review
The Collective of course!
All of the folks that came over to the Palringo chat to help testing.
Let me know if I forgot anyone!
The XDA community as a whole!
*For users that prefer a non-standard DPI, please use the modded market from the OTA. Keep in mind that you will have to purchase paid apps from the browser, not from the Play Store App.*
Code:
4/23/12 - [URL="http://bit.ly/I4rVFJ"]v2.1 Alpha[/URL]
-Updated included apps
-tweaks to build prop for data speeds and wifi connection stability
-Included stock aospX "cottoncandy" kernel
-other stuff I forgot...
changes from AR29 and 30:
(AR30)Merged latest from AOSP master
framework: updates from CodeAurora
updated bash (4.2) and lsof (4.86)
build: various gcc 4.6 compiler fixes
qcom/mm-video: updated latest from CodeAurora
skia: Revert "external/skia: Add QC hooks" (Issue #50)
dalvik: Revert "Debug Change to stop the process with excessive JNI"
(AR29)Ace: enable mass storage
Ace: update prop for better pm
Gapps: Updated to latest 20120317
aospX/common: Add OpenVPN to build
aospX: use cleaner default wallpaper
Camera: commits from CAF and Twisted
DexOpt anything on /system in /cache
Music: Merged latest from CodeAurora
system/core: Merged 4.0.4_r1.1 history
qcom/display: disabled various debugging
qcom/display: Merged latest from CodeAurora
framework: Various commits from CodeAurora
framework: Fix contact lookup with CLIR prefix
framework: AudioManager: Handle KEYCODE_VOLUME_MUTE
Updated iptables (v1.4.13) and iproute2 (3.3.0)
kernel: kgsl,vidc,rotator,pmem updated from CAF
Mms: Fix wrong message selection in context menu
Mms: Make notifications consistent with the Gapps
Rebased webkit/skia/v8 off latest from CodeAurora
DeskClock: Fix "dismiss dialog would unlock lockscreen"
DeskClock: Added flip to dismiss/snooze functionality
libphonenumber: Avoid '0' being discarded in dial string.
Browser: swipe edge of screen to view the previous/next tab
Attempt #1 to fix homescreen stutter (reverted CAF performance class)
libI420colorconvert: Add new library for MovieStudio color conversions
4/15/12 - [URL="http://bit.ly/HJ6ury"]v2.0 Alpha 1.2[/URL]
-Changed base to AospX by existz (based on AR28)
-Includes lordmodUEv9.4.1-ICS-BFS by LorDClockan as stock kernel
-Apex is included launcher
-revamped OTA
-Much smoother overall AOSP build
-Tons of under the hood improvements
-Stuff I forgot
4/1/12 - [URL="http://bit.ly/H88Buc"]v1.0 Alpha 1.5.1[/URL]-Initial Public Release
Mine for.....well not sure yet but im sure ill use it for something
Downloading now. Many thanks to all who sweated over this.
Sent from my HTC Inspire 4G using xda premium
Congrats
Awesome work as always guys.
Mine
I got your 10 char right here
Rocking bacon...ics style
Yesssss I've been waiting to leave a post on Mel!!!!!!!! Thanks Roy and team for this great rom!:beer::beer::beer::beer::beer::beer::beer:
Sent from Mel free of Bobbies.
It's heeerrrreee great job! Thanks!
Thanks bunches :thumbup::thumbup::thumbup:
Sent from my Desire HD using Tapatalk
About time!
First ics rom I have ever used that my games did not inexplicably freeze! Great work, and as always anxiously awaiting the next build!
Been on this for 4 days now. Hard to believe that ICS could be so smooth and problem free for me. Hard to see how anything could dethrone this one. Great job with this Roy, and thanks for the opportunity to be a small part in all of this.
Sent from my HTC Inspire 4G using xda premium
Great job as always, Roy!
Inspire 4G // Melchizedek
been using this rom for a few days now and ever since i put it on my phone its been rainy and wet outside. The other day we had hail and it was 70 some degrees. Other than that everything is perfect. Hopefully this will be fixed in the next update. On a more serious note temple run doesnt recognize swipes. I switched back to absolution for a minute and it ran perfect... then wiped and reinstalled cheese d_ick and still doesnt recognize swipes. That is really the only thing ive noticed.
great work, Roy. a-1 daily driver - really no reason for anyone to be on GB anymore, IMHO.
Great job as always Roy!!!
And a big thanks to the entire Collective the foe yet another Great ROM
Sent from my HTC Inspire 4G using Tapatalk
bobbydbost said:
been using this rom for a few days now and ever since i put it on my phone its been rainy and wet outside. The other day we had hail and it was 70 some degrees. Other than that everything is perfect. Hopefully this will be fixed in the next update. On a more serious note temple run doesnt recognize swipes. I switched back to absolution for a minute and it ran perfect... then wiped and reinstalled cheese d_ick and still doesnt recognize swipes. That is really the only thing ive noticed.
Click to expand...
Click to collapse
Noticed the same issue with age of zombies touch is not registered correctly but it is alpha and a good alpha at that, I can't wait till they get it running as smooth as leisure suit
Sent from my Inspire 4G using XDA
Always nice to have a collective or team Phoenix release every April 1.
Sent from my Desire HD using Tapatalk
Really really wanna try this but link seems to not work with my app... I'm unsure it pulls up the weboage but nothing saying its downloading so please guys help
Sent from my Inspire 4G using xda premium
toxicpaulution said:
Really really wanna try this but link seems to not work with my app... I'm unsure it pulls up the weboage but nothing saying its downloading so please guys help
Sent from my Inspire 4G using xda premium
Click to expand...
Click to collapse
Works fine here
I got your 10 char right here
Rocking bacon...ics style
Same here, no problem at all.
The Family Proudly Presents:
Melchizedek
For Inspire 4G or Desire HD
*DISCLAIMER*
You do this knowing all risks involved with flashing a ROM.
Neither I nor any member of The Family is responsible for any permanent damage.
This is considered an Alpha release so please treat it like an Alpha and expect bugs and some things not to work properly.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
*Read This Entire Post Completely Then Read it Again*
NOT WORKING:
-Camcorder
-Other minor bugs
*WARNING*
-Do not ask for support or complain that something doesn't work because YOU restore apps and/or data and/or system settings from Titanium Backup or Mybackup etc.
-If you would like a CFS version grab the one from the OTA .
-Do Not ask for ETA on the next release
-Do Not ask for help if you didn't full wipe before coming from a different rom!
-Do Not Flame other users in my thread! Read the Rules
-Please do not post bug reports unless you are specifically asked by a member of our team to test something and report back. We know some things aren't fully functioning.
-Do not ask for features unless I post a question asking what features people would like. (which will be seldom)
-Enjoy the rom and remember it is ALPHA Quality and sure to contain bugs
All credits goes to existz, LorDClockan, twistedumbrella, dh.harald, CM crew, Evervolv, synergye, AOKP team, flappjaxxx, and all others that have contributed to this extension of our community!
What is it you ask?
-A Serious Work in Progress!
-This is compiled from from source from AospX by existz
-Redemption Tools app with OTA features
-Custom Camera Launcher that launches Angel Camera for stills and VideoCam Illusion for Videos
(You need a player like Rock Player Lite or MXPlayer to Play the Videos)
-OTA updates.
-Andrev OC built in with CPU Tweak for custom Sleep/Wake Profiles
-Custom Preset CPU OC profiles and preset UV settings
-Latest Gapps for ICS and libs
-Apex Launcher
-ES File Manager
-Titanium Backup
-QuickPic
-Palringo chat app - team chat room is: theandroidcollective sign in with XDA name if at all possible! (Gotham theme by Trevino07 and Zelendel)
-Tons of Features in Collective Tools in the Settings Menu
-Ability to download and install Nova Launcher and others along side the default launcher.
-Again Please keep in mind that this is an Alpha Release. It is very stable for every day use but will contain bugs
**included kernel in this build is stock aospX. The custom profiles from tools and the clock steps in cpu tweak will not work. If you are using included kernel, please use AX Control for setting clock speeds and governors. The LorDMod kernels, found in the OTA are compatible with Tools and CPU Tweak. We are working on going back to our own custom kernel, so bear with us**
Download Melchizedek
Melchizedek Q&A
How To:
1. Back Up your Stuff.
2. Wipe Data/ Factory Reset
3. Wipe Cache and Dalvik Cache
4. Flash .zip in recovery
5. Allow full first boot, reboot
6. Sign in to Market to add account.
7. Open Redemption Tools from Settings Menu and make it your own.
8. Rate the thread and hit some "Thanks" buttons!
Video by Flow-Wolf
Custom OC Profiles & Undervolt Settings:
Sloth - Sleep = conservative 122/122 + Wake = ondemand 122/921
flappjaxxx - Sleep = conservative 122/122 + Wake = ondemand 122/1152
rasroy - Sleep = conservative 122/384 + Wake = ondemandX 122/1382
Nun - Sleep = conservative 230/384 + Wake = ondemand 230/1228
Lone Star - Sleep = conservative 122/122 + Wake = ondemandX 230/1305
In the CPU Tab hit your Menu button and you will see CPU Tweak.
CPU Tweak is exactly that, it will allow you to fully customize your Sleep and Wake Governors and Clock Speeds.
*Warning* Do be careful with this as using incorrect settings may have ill effects.
Do not use these setting unless you know what you are doing.
Undervolting:
Lite Undervolt = -25mV
Standard Undervolt = -50mV
Aggressive Undervolt = -75mV
Credits and Thanks (in no particular order)
existz
LorDClockan
Zelendel
flappjaxxx
cwhitney24
Trevino07
joedeuce
dh.harald
twistedumbrella
CM crew
Evervolv
synergye
AOKP team
Nunhugger
Johnsondr80
alienmind
killersloth
ashies7
Gio22
Tx Redneck
mrhaley30705
Pick A Name
studacris
JoeDV
Sybregunne - For giving us Andrev OC and Daemon Controller
AngelDeath - For awesome GPS work
crypted- For awesome GPS Work
Tsjoklat for modded market
Flow-Wolf for video review
The Collective of course!
All of the folks that came over to the Palringo chat to help testing.
Let me know if I forgot anyone!
The XDA community as a whole!
*For users that prefer a non-standard DPI, please use the modded market from the OTA. Keep in mind that you will have to purchase paid apps from the browser, not from the Play Store App.*
Code:
4/23/12 - [URL="http://bit.ly/I4rVFJ"]v2.1 Alpha[/URL]
-Updated included apps
-tweaks to build prop for data speeds and wifi connection stability
-Included stock aospX "cottoncandy" kernel
-other stuff I forgot...
changes from AR29 and 30:
(AR30)Merged latest from AOSP master
framework: updates from CodeAurora
updated bash (4.2) and lsof (4.86)
build: various gcc 4.6 compiler fixes
qcom/mm-video: updated latest from CodeAurora
skia: Revert "external/skia: Add QC hooks" (Issue #50)
dalvik: Revert "Debug Change to stop the process with excessive JNI"
(AR29)Ace: enable mass storage
Ace: update prop for better pm
Gapps: Updated to latest 20120317
aospX/common: Add OpenVPN to build
aospX: use cleaner default wallpaper
Camera: commits from CAF and Twisted
DexOpt anything on /system in /cache
Music: Merged latest from CodeAurora
system/core: Merged 4.0.4_r1.1 history
qcom/display: disabled various debugging
qcom/display: Merged latest from CodeAurora
framework: Various commits from CodeAurora
framework: Fix contact lookup with CLIR prefix
framework: AudioManager: Handle KEYCODE_VOLUME_MUTE
Updated iptables (v1.4.13) and iproute2 (3.3.0)
kernel: kgsl,vidc,rotator,pmem updated from CAF
Mms: Fix wrong message selection in context menu
Mms: Make notifications consistent with the Gapps
Rebased webkit/skia/v8 off latest from CodeAurora
DeskClock: Fix "dismiss dialog would unlock lockscreen"
DeskClock: Added flip to dismiss/snooze functionality
libphonenumber: Avoid '0' being discarded in dial string.
Browser: swipe edge of screen to view the previous/next tab
Attempt #1 to fix homescreen stutter (reverted CAF performance class)
libI420colorconvert: Add new library for MovieStudio color conversions
4/15/12 - [URL="http://bit.ly/HJ6ury"]v2.0 Alpha 1.2[/URL]
-Changed base to AospX by existz (based on AR28)
-Includes lordmodUEv9.4.1-ICS-BFS by LorDClockan as stock kernel
-Apex is included launcher
-revamped OTA
-Much smoother overall AOSP build
-Tons of under the hood improvements
-Stuff I forgot
4/1/12 - [URL="http://bit.ly/H88Buc"]v1.0 Alpha 1.5.1[/URL]-Initial Public Release
What's the gaming performance of this rom? Otherwise it looks good. I will flash this later to give you some feedback. Good luck.
CJHolder said:
What's the gaming performance of this rom? Otherwise it looks good. I will flash this later to give you some feedback. Good luck.
Click to expand...
Click to collapse
It's been good for everyone in testing. Hit the Q&A and let us know how it performs for you.
Mine
I got your 10 char right here
Rocking bacon...ics style
It's finally here. It's really great stuff! Enjoy
Great rom , no bugs at all
Wow. First things first, we need more ROMs like this. Brilliant work.
This ROM is smooth, I mean smooth. I've been using it for an hour or so now and am very impressed. APEX is a good choice of launcher too. As for the gaming performance, well. It's definitely the best performance from a ICS rom but not quite as good as a GB rom. However this is expected considering ICS has not been officially released yet.
Working Camcorder! Yes! Finally. This is fantastic news, although it is laggy as **** in 720p. Still, another work in progress, but it's a start and I'm looking forward to recording in 720p
Apps... There are a few of unnecessary apps. But settings have a few hints to upcoming features which I'm looking forward too such as a theme selection tool.
Anyhow, I will continue to post feedback as well as bugs that I may come across.
Good luck with the development of this ROM!
Thanks, CJ-
Been using this one for a couple of hours now and I must say it runs great. No fc's so far and very smooth. Thanks!
Will report back if anything strange comes up.
Stitch15 said:
Been using this one for a couple of hours now and I must say it runs great. No fc's so far and very smooth. Thanks!
Will report back if anything strange comes up.
Click to expand...
Click to collapse
Glad you are enjoying it!
If you have any problems or questions, please come see us in the Q & A thread.
Absolution 3.7 /Redemption A4.0/ Melchizedek Alpha 1.5.1
How About market? Can i buy app? I ask because on ice cold Sandwich i cant, reverted market doesnt work
Wysłane z mojego Desire HD za pomocą Tapatalk
Yes, finally Melchizedek got its own thread
Running version 1.5.1 now since last Thursday, and it is really stable and reliable even for daily usage.
Actually I only had once a reboot of my mobile while browsing with Dolphin Browser HD. For camera I use a 3rd party app which works fine.
The only requests I would have are still:
1. The lockscreen delay is not properly working. Screen is locked immediately and not after the selected time - when I lock the screen manually.
2. The mobile data option would be great to be selectable as well within the profiles.
Otherwise working perfectly until now.
Looking forward on the next release of that nice ICS rom!
Nice rom, thanks for your work.
Maybe the screen brightness would be more accurate...
ICV said:
Nice rom, thanks for your work.
Maybe the screen brightness would be more accurate...
Click to expand...
Click to collapse
Indeed, that's something which I recognized as well. Is taking some time before it has been adjusted properly.
Oww .. man .. the best ics rom .. its great smooth and no bugs at all .. but is my opinion how's you guys ..
Sent from my HTC Desire HD using Tapatalk
THX for this very nice ICS Rom ...
Works great!
Wifi hotspots not function , any help ?
Sent from my HTC Inspire 4G using xda premium
Guichinga said:
Indeed, that's something which I recognized as well. Is taking some time before it has been adjusted properly.
Click to expand...
Click to collapse
ICV said:
Nice rom, thanks for your work.
Maybe the screen brightness would be more accurate...
Click to expand...
Click to collapse
They are working on all these little bugs
Verstuurd van mijn HTC Desire HD met Tapatalk
thanks for you are roms is fest and good
Hi !!!
Just wanted to know if there is anything EXTRA ( improvement or fine tuning) to " flappjaxxx" ICS ROM ???
I asked 'cause flappjaxxx ICS ROM has been my everyday ROM and it is PERFECT with NO COMPLAINTS...whatsoever.
If it is more or less the same ROM then its gonna be a PERFECT piece of art.
Thanxxx
Please try shadow, samurai, and stock kernels also for a bit to see what one you like best! Don't choose a kernel because everyone else likes it or because it has a long feature list and fancy new shiny things.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is a kernel, not a full ROM... please use AOKP, MIUI4, or CM9 with this...
Atarashii - New/Fresh - This kernel was made to revolutionize what all of the current 'normal' Epic kernels have. I have added in tweaks and mods that were never before seen on the Epic, long forgotten, and from other devices such as the Nexus S and i9000.
Hopefully (probably) most other kernel developers will implement these new features and help keep the Epic current.
I prefer that you use NSTools to overclock and undervolt and do other tweaks. It is more featured than Voltage Control and this kernel supports it better. Voltage Control works fine too but I recommend uninstalling all cpu tools you have and installing NSTools.
I am not responsible to ANYTHING that happens to you or your phone as a result of using this kernel. Most things in this are experimental to a point but have been tested and confirmed safe.
Some of these features have NEVER been used before on the Epic, so don't expect everything that you are used to. Things can and will be different than usual.
Feature List
Voodoo Sound v10 by Supercurio
Voodoo Color by Supercurio
Optimized compiler flags by netarchy and Ezekeel
Live OC (on the fly bus overclock) by Ezekeel (Use NSTools app, not voltage control)
Custom Undervolt by Ezekeel (Use NSTools app, not voltage control)
Misc. bugfixes
Battery Life eXtender (BLX) v1 by Ezekeel
OS tools compiled with O3
Swappiness set to 10 from 60 (Rodderik)
Voodoo mDNIe (keeps text sharp and backgrounds don't look like crap)
Defconfig tweaks
Overclocking (no need for enabling crap in Voltage Control)
Undervolting both via Voltage Control and NSTools (Ezekeel & nubecoder)
Tweaked ondemand
Tweaked conservative
Optimized SIO
Optimized deadline
Added TINY_PREEMPT_RCU
Added optimized CRC32 algorithm
Optimized ARM RWSEM algorithm
JHash 3
Added SLQB memory allocator
Add 3 Button Reboot
Increase default readahead to 1024kB
Voodoo Color defaults that do not suck
Allow CPU-supported unaligned accesses
Some SD/MMC tweaks (might reduce wakelocks)
mDNIe is enabled but tweaked to look good
Swag
Major thanks
Ezekeel
Team Glitch
Epiccm team
bbelos
nubecoder
nullghost
rodderik
supercurio
Aprosamurai
thomasskull666
Many many others
Source
https://github.com/marcusant/Atarashii
Download
v5 w/ Voodoo: http://marcusant.com/nyankernel/epic/nyan_v5_perm.zip
a0e5cca4fdc856c4468f8188e5d0c871
v5 w/o Voodoo: http://marcusant.com/nyankernel/epic/nyan_v5_perm_noVoodoo.zip
ce52381883c180a09aefb2e3e427e730
Replace TWRP with CWM (flash within TWRP with inject off): http://marcusant.com/android/epic/restore-cwm.zip
Changelog
v5 WiP
-Update to beta3 of cm9
-Change DVFS relayed things
-Cypress touch key fixes
-Update to kernel 2.35.13 (still listed as .7)
-Switch to git SHA1
-Add boot progress bar
-Switch to crespo mdnie
-Reduce log buffer size
-Battery updates from infuse
-KSM
-ULP_FREQ lowered to 400mhz
-Sysfs control for capacitive lights
-Glibc versions of string and memcopy
-Add proportional rate reduction
-Fix Google Maps
-Increase USB strength
-More
v4.1
-Fix green flashing to some extent
v4.2
-Add TWRP (may go back to CWM) (Dees-Troy)
v4.3
-Add some misc stuff
-Switched to voodoo color settings from bbelos
-Fixed some sleeping stuff and 100mhz (mkasick)
-Increase USB strength
-Add sysfs control for softkeys (bbelos)
-Update to current beta3 of CM9 (still works on AOKP and older CM9 builds)
-Fixed GMaps
WOW finally 1st on a post!
And what a post to be FIRST on...Thank a ton marcusant! DL'ing NOW
Very interesting, I'll definitely be looking over your code tomorrow morning while I'm at the doctor's office lol. Good work my friend, this is definitely another big step forward for the Epic!
Sent from my SPH-D700 using xda premium
Nice Marcus!
All these new tweaks really got me curious!
I'm gna flash it and see how my phone likes it.
Pretty excited to try this kernel out
Sent from my SPH-D700 using xda premium
thomasskull666 said:
Very interesting, I'll definitely be looking over your code tomorrow morning while I'm at the doctor's office lol. Good work my friend, this is definitely another big step forward for the Epic!
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
I used some of your old things for voodoo (needed to be added to a new file and changed a bit) so thanks!
Sent from my SPH-D700 using Tapatalk
OP cleaned up a bit.
downloading
hey so im anoob at this at uv and oc
whats the purpose of these two?
Thanks! DL'n Now!
---------- Post added at 11:53 PM ---------- Previous post was at 11:52 PM ----------
diablo311 said:
downloading
hey so im anoob at this at uv and oc
whats the purpose of these two?
Click to expand...
Click to collapse
UV to save battery!
OC to make your phone snappy!
downloaded and flashed.
booting up .......
ummmm one more thing tho
how wud i set up the uv to save battery? im sorry i know its off topic but i just thought about asking this sorry,...
One of the first, flashing it now, thanks!!
Flashed and running on B31. Looking good so far Marcus. Any type of behavior we should be looking out for due to some of these "new/old" tweaks?
Sent from my SPH-D700 using xda premium
One of the clear changes is that the whole color scheme appears a little bluish. It's not bad, but is there a way to revert back to natural colors? Thanks!
Sent from my SPH-D700 using XDA
incisivekeith said:
One of the clear changes is that the whole color scheme appears a little bluish. It's not bad, but is there a way to revert back to natural colors? Thanks!
Sent from my SPH-D700 using XDA
Click to expand...
Click to collapse
I'm going to change that but for now you can just change it in the "voodoo sound" app under samoled
Sent from my SPH-D700 using Tapatalk
marcusant said:
I'm going to change that but for now you can just change it in the "voodoo sound" app under samoled
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
Actually I'm liking the change in the color scheme - I was just wondering how to revert back if needed.
Another thing I noticed is that while scrolling in XDA threads it stutters. It might be just me but still wanted to point out.
As someone asked it would be really nice to know what kind of good changes we should expect from this kernel. It looks good.
Sent from my SPH-D700 using XDA
MD5?
Not the worst thing in the world but for about the last 4 seconds of boot and then until my sd card has been scanned, everything has a heavy green overlay.
Sent from my SPH-D700 using XDA
Also NSTool won't let me set battery charge to above 96%. Not sure if that is relevant to the kernel or if that is an app "feature" though.
Sent from my SPH-D700 using XDA
marcusant said:
How to overclock
Download NSTools from the market
Go to the CPU tab
Set the max frequency to what you want
Liveoc is really buggy and I need to talk to thomasskull about some RAM things to make sure I do not brick anybody. For now, do not mess with liveoc and keep it at 100%.
How to undervolt
Download Voltage Control (this is also possible via nstools)
Slide to the voltages tab
Click on a frequency
Slide the slider to change UV value and apply
Click to expand...
Click to collapse
So we should have both nstools and vc installed and running at the same time if Iwant to oc and uv? What kind of downside to the kernel if I want to use vc for both ocing and uving? *
riotkid976 said:
Not the worst thing in the world but for about the last 4 seconds of boot and then until my sd card has been scanned, everything has a heavy green overlay.
Sent from my SPH-D700 using XDA
Click to expand...
Click to collapse
I just noticed that when I unlock my phone there is a green film covering the screen for a fraction of a second.
It seems my Epic can't handle 1.4 GHz speed as it hangs and restarts, so I am decreasing the clock speed. Does anyone have issues like me at 1.4?
Sent from my SPH-D700 using XDA
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- Cyanogen and his team
- The Paranoidandroid developers
- Preludedrew
- JMZtaylor
- Atyoung
- Tommytomatoe
- PapaSmurf 151
- KommodoreHeinz
- iBlowpot
- X_N_
- sammyycakes
- Dsixda
- Darktremor
- rapmv78
Everyone that supports Team D.I.R.T! THANK YOU!!
* If you feel that your name should be in the OP for one reason or another, please PM and I'll get you up there if I forgot you
KERNEL SOURCE FOR THE ONE USED IN THIS ROM : https://github.com/Evervolv/android_kernel_htc_qsd8k
THE BUSYBOX SOURCE USED FOR THIS ROM : https://github.com/CyanogenMod/android_external_busybox
- NO 4G
- NO Camera at all....FFC, Camcorder
- NO Netflix
- USB won't work in Tablet Mode
** Whatever else you guys find
If you have an issue and you want to call our attention, here's what you do:
1. Try everything you can, find solutions for yourself. Wipe caches, revert all your settings you have made, go back to your stock Kernel, factory reset if you have to or reflash the rom. Assume that the issue is on your side and try your best to isolate it.
2. Search this thread and JMZtaylor's thread aswell (its the base ROM) for possible reoccurences of your issue and hopefully solutions that may have come up.
3. If you think the issue is important enough that we should cease our work and look into it, post your issue, BUT
... stay friendly, do not demand anything, do not threaten
... explain your issue as precise as you can, name the exact apps and conditions that cause trouble, help us to replicate the issue right away. If we can't there's no way we can fix it and your post will simply clutter the thread
... collect evidence, keep in mind this is a developer thread so even if you are not one, do us the favor and research how to record logcat. logcat is the single most important help you can give us to resolve your issue.
Team D.I.R.T Paranoidandroid Jelly Bean v1.0
- Got it to boot
- Fixed USB, Data and the usual stuff
- Added GAPPS
- Included Beats Audio/XLoud
- Applied Landscape Lockscreen MOD
- Own Number for voicemail
- Fixed a few more things here and there.....REMEMBER this is a WIP (work in progress)
Team D.I.R.T Paranoidandroid Jelly Bean v1.1
- Removed Lockscreen Circles
- Removed Torch app for now until fixed
- Optimized all .ogg files
- Made a few performane tweaks....should feel faster!
- Updated hosts file for ad-free experience
Team D.I.R.T Paranoidandroid Jelly Bean v1.2
- Paranoid got its own dir in /system/etc/paranoid - pad.prop is not properties.conf
- A clean backup properties file is shipped, you can make a full reset in the panel in case you lost it with all the settings you made (very useful for those new to Paranoidandroid)
- Force option can be activated in the panel, good for widget scaling
- The DPI sliders in the panel read min/max props from properties.conf, define them as you wish
- TabletUI Recents are back to a bigger size, this is temporary, I'll try to find a way to port the phone implementation as project butter/Google skipped the TabletUI code
- CM fixed alot of features again, they're included!
- Added a few tweaks for performance and battery life
Team D.I.R.T Paranoidandroid Jelly Bean v1.3
- Updated CM10 base to keep up with new CM fixes, features or whatever
- New option in Paranoid Settings called "large". This tricks an app into thinking you have a large screen.......might be helpful in some cases, might be useless in other cases...hahaha
- Option to toggle Screenshot in power options and On-Screen buttons
- Removed ADB notify icon from statusbar and updated GAPPS
- Total Hybrid engine revamp, alot less clutter, many bugfixes, apps wont make jumps when you load them up because their actual size is calculated by the engine
- The algorithm to extract the actual layout containers from apk files works more precise and can reveal more than before. There will still be a few apps left that will do that layout stuff in java, an override button will be added in future releases for that. In the meantime you can edit /system/etc/paranoid/properties.conf with your favorite file manager text editor for the following....
360 for phone-like UI
600 for phablet
720 = tablet
1280 = super huge tablet
http://themikmik.com/forumdisplay.php?1886-Mazda-s-Jelly-Bean-ROMs-Info-Screenshots-and-Download-Links
PLEASE be respectful and REMEMBER that this is FREE! I do NOT work for you! I have NOT and WILL NOT ask for donations for any of this! If you wish to donate, that's on you and that's just that....is a donation! YOU WILL NOT get an early copy of ANY ROM and I will not post your post your name/username anywhere....just not my style!
I am not responsible for any issue flashing roms may cause for your phone. By flashing this rom, you are accepting any and all risks you may be taking in doing so! Team D.I.R.T and I will be updating this port as things are added, removed or changed. Any suggestions are appreciated, but not guaranteed to make the cut.
ENJOY!!
Question : Can I flash another kernel with this ROM?
ANSWER : At this moment you can't! If you try to flash another kernel i.e Mason Kernel, it will break your WiFi.
Question : When is the next version going to be released?
ANSWER : In the next 5 minutes or maybe in the next 5-6 months....Don't ask for ETAs!! The next version will be released when is ready to be released.
Question : I'm stuck at the splash screen, what can I do?
ANSWER : Don't FREAK OUT and pull your battery! Go into your recovery and make sure you've wiped EVERYTHING except your sdcard and flash the ROM zip again. Before rebooting make sure you unplug your phone until you've booted up.
Question : When I was on ROM A or ROM B, this one thing was working like this BUT is no longer working like that....what can I do?
ANSWER : First thing you need to remember is that every ROM is different. Don't expect to have the same features from MIUI on a Sense ROM or something from a GB ROM working on a JB ROM. Also remember that this is a WIP (work in progress) ROM and certain things will not work like they do on a Sense 1.0 ROM.
Question : Why are people so mean to me?
ANSWER : Because this is the internet my friend! Chances are the reason people are being mean to you is because you either asked something that's been answered 800 times already or that's already answered in the OP! If it becomes an issue, hit that triangle and let a moderator handle it
Anything I can do to help!
Looks good Mazda.
And just when I thought the battery stats couldn't wait. Hahs!
Sent from my ICS Evo via Team D. I. R. T.
The link is posted btw
Mazda said:
The link is posted btw
Click to expand...
Click to collapse
Cool downloading now, thanks.
Sent from my PC36100 using xda app-developers app
Thank you! Insomnia, here I come!!!
Sent from my ICS Evo via Team D. I. R. T.
Woot. On this as soon as I have Wi-Fi
Sent from my PC36100 using Tapatalk 2
Freakin' epic! Loving it! Team D.I.R.T....FTW!
"It's all just a psy-op...wake up people!"
Team D.I.R.T Paranoidandroid JB v1.1 is out.....go get it!!
Here's the changelog for V1.1
- Removed Lockscreen Circles
- Removed Torch app for now until fixed
- Optimized all .ogg files
- Made a few performane tweaks....should feel faster!
- Updated hosts file for ad-free experience
Also just in case anyone wants to rock Paranoidandroid with pride.....
Mother of g0d....
OK i could say alot about how im stunned at this awesomeness but isntead of wasting time ill cut to the chase
This is me Right now, Looking at this post.
This is just godly on all levels imaginable and in-imaginable.
Also...did anyone else know that on
(ra-supersonic-4.3-smelkus-tmdirt)
it has touch input response for scrolling :x or has it always had that???
Sieze said:
OK i could say alot about how im stunned at this awesomeness but isntead of wasting time ill cut to the chase
This is me Right now, Looking at this post.
This is just godly on all levels imaginable and in-imaginable.
Also...did anyone else know that on
(ra-supersonic-4.3-smelkus-tmdirt)
it has touch input response for scrolling :x or has it always had that???
Click to expand...
Click to collapse
yes it has always had touch scrolling tho i still find myself using haptic or volume rocker unless its something quick
and awesome mazda congrats on getting everyone up to jelly bean level
ben.nesheim said:
yes it has always had touch scrolling tho i still find myself using haptic or volume rocker unless its something quick
and awesome mazda congrats on getting everyone up to jelly bean level
Click to expand...
Click to collapse
Ok thanks. Yea i always used the buttons at bottom bottom but the response to touch i never knew it had it.
This is the the best jellybean Rom I've ever flashed IMO
Sent from my Og Evo 4G
Is video playback still an issue on this jb rom?
Sent from my PC36100 using Tapatalk 2
youngchris29 said:
Is video playback still an issue on this jb rom?
Sent from my PC36100 using Tapatalk 2
Click to expand...
Click to collapse
video playback is an issue on every JB to my knowledge
Mazda said:
video playback is an issue on every JB to my knowledge
Click to expand...
Click to collapse
Yep.
Alex, good work on this dude, I'm starting to think you're half man and half machine
MBQsniper said:
Yep.
Alex, good work on this dude, I'm starting to think you're half man and half machine
Click to expand...
Click to collapse
+1
Sent from my PC36100 using xda app-developers app
Mazda said:
video playback is an issue on every JB to my knowledge
Click to expand...
Click to collapse
I only asked because I'm running jmz's 7/21 build of cm10 and video playback works fine. Maybe it's just an anomaly as on his more recent builds, video playback does not work
Sent from my PC36100 using Tapatalk 2
CUSTOM CM10 KERNEL FOR THE P999Buttery smooth and fast!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This thread will host my custom CM10 P999 kernel, from the V30A sources released for the P990
I will keep upgrading this kernel and make it as buttery smoooooth as possible!
This thread, and the kernel, are still a WIP for now
INSTRUCTIONS
For dualboot users : Boot into CM10.1 and power off the phone. Then, go to recovery using power + vol. down like always.
1) Flash a compatible ROM in recovery(See compatibility section)
2) Flash this kernel (See download section for available versions)
3) Advanced > Wipe dalvik cache and Fix permissions
4) Reboot and enjoy!
********************************************************************************************
DISCLAIMER
I am not responsible for any damage related to the installation of this kernel on your device.
This is still a beta and could not be stable with every functions. You do this at your own risk.
********************************************************************************************
COMPATIBILITY
- Adampk's custom CM10.1 ROM build 7
- My CM10.1 Weeklies
********************************************************************************************
DOWNLOADS
Stock voltage, base kernel
DOWNLOAD HERE
Overclocked @1,2GHZ Be aware that this is still a beta. Flash at your own risk!
DOWNLOAD HERE
********************************************************************************************
CREDITS
Credits to everybody who contributed to this project, so that our phone could run at his full potential!
TonyP, Harsh and wkpark For the help they had given me by PM
Naberus, King-Nai and Adampk For their work on the kernel or the base ROM
...and everybody who contributed to the development process, with logcats or with their support!
Sorry if I forgot someone please remind me
********************************************************************************************
My github
CHANGELOG
Version 0122
- ROW I/O Scheduler
- Google SNAPPY zRam compression
- LowMemoryKiller updated
- SMP driver updated
- LED blinking function
- TCP Proportional rate reduction
- Fixed LEDs on during deep sleep
- Updated INTERACTIVE CPU governor
- Added Bluedroid support
- ...and much more!
(Credits to Pengus77 for these updates!)
Version 0116 + OC (See last post)
- Enabled wifi deepsleep
- Fixed brightness override
Version 0104
- Added hotplug and smartassv2 CPU governors and adapted to our device
- Mooooaaar available RAM (yay!)
- Radio still silenced
- Several WIFI tweaks and battery saving fixes
- Several audio driver fixes
- Fixed WIFI for CM10.1
- Removes MMS messenger app
- Cherrypicks from the latest tegra 2.6.39 kernel (See github)
Version 1219 + OC
- Set I/O to CFQ to reduce lag
- Battery meter touch-ups
- Removed RIL/Radio and Wifi Calling (kineto) for battery saving and faster boot/shutdown
Version 1215 + OC
- Support for CM10.1
- Fixed battery meter when not charging
- Many, many various fixes
- Fixed ADB detection for non-linux systems
Version 1213 + OC
- Add back in-OS support for Deadline I/O Sched.
- Added newest BFQ I/O Sched. (v5r1) for 2.6.39 kernels and set as default
- Added V(R) I/O Sched.
Version 1211OC
- Initial release @1,2GHz
Version 1211
- Initial release
- Fixed boot for the P999
- Fixed WIFI and camera hangs
- Memory and speed tweaks (buttery smooth at first release )
***********************************************
TO DO LIST (Upcoming builds...)
- Fix radio nodes
Now that you guys are divorced, I'll check with my boss and see if I can do an article on just your kernel solely, if not, I'll mention it in my ROM article when the radio gets up and running. Thanks boss, killer work.
Sent from my LG-P999 using xda app-developers app
mustangtim49 said:
Now that you guys are divorced, I'll check with my boss and see if I can do an article on just your kernel solely, if not, I'll mention it in my ROM article when the radio gets up and running. Thanks boss, killer work.
Sent from my LG-P999 using xda app-developers app
Click to expand...
Click to collapse
Hehe I like the term divorced here I made a thread to simplify things up, and separate kernel related stuff to ROM dev. related stuff. This has always been kind of a teamwork project since a ROM cannot run without a kernel and a kernel is useless without a ROM. Now that Arcee has implemented the newer V30A stuff in his repo, adampk doesn't really need my kernel anymore to test his RIL as he has everything in hand to make one himself.
Haha, that's cool, I noticed is thread jacking comment, soooo I couldn't help but use the "divorce" term. Good work nonetheless.
Sent from my LG-P999 using xda app-developers app
Mazout. I know that once its fully functional u will redo the amount of ram to be assigned to apps. I just wanted to know have u tested the rom's performance after changing those numbers yet? M asking this because I heard on p990 thread that because of less ram... they had to reduce the amount of ram for apps in order for the OS to work fluidly ... do u have any rough idea how much ram will u assign to apps and to OS? To get the same fluidity as now with some ram left for heavy apps like GTA 3 or Modern Combat 3
Sent from my LG-P999 using Tapatalk 2
n30wav3 said:
Mazout. I know that once its fully functional u will redo the amount of ram to be assigned to apps. I just wanted to know have u tested the rom's performance after changing those numbers yet? M asking this because I heard on p990 thread that because of less ram... they had to reduce the amount of ram for apps in order for the OS to work fluidly ... do u have any rough idea how much ram will u assign to apps and to OS? To get the same fluidity as now with some ram left for heavy apps like GTA 3 or Modern Combat 3
Sent from my LG-P999 using Tapatalk 2
Click to expand...
Click to collapse
Well, with that info in mind, you could setup swapper2 for some app swap space memory, granted your external SD is class 8 or 10. Than we'd be able to give up app ram for sys ram, with a slightly longer app load time for memory intensive apps, such as games you mentioned. i play them too.
Since this is kernel and not rom, i was going to suggest possibly baking the app into the rom, bit here is a mute point.
G2x-CM7 Weekly 12/09/12 Build, Trinity T15 Kernel
n30wav3 said:
Mazout. I know that once its fully functional u will redo the amount of ram to be assigned to apps. I just wanted to know have u tested the rom's performance after changing those numbers yet? M asking this because I heard on p990 thread that because of less ram... they had to reduce the amount of ram for apps in order for the OS to work fluidly ... do u have any rough idea how much ram will u assign to apps and to OS? To get the same fluidity as now with some ram left for heavy apps like GTA 3 or Modern Combat 3
Sent from my LG-P999 using Tapatalk 2
Click to expand...
Click to collapse
This patch is already included in this build. I have about ~350mb for apps. If I want to increase this I would have to reduce the GPU allocated memory which, in this case with 3D graphics apps, might no be beneficial.
If there's too many reports of having not enough free RAM I will consider adjusting this.
Mazout360 said:
This patch is already included in this build. I have about ~350mb for apps. If I want to increase this I would have to reduce the GPU allocated memory which, in this case with 3D graphics apps, might no be beneficial.
If there's too many reports of having not enough free RAM I will consider adjusting this.
Click to expand...
Click to collapse
... I was getting 35 MB free without any app installed or running when I tested the rom u posted with ur kernel built-in .... 350 MB is good for me .... shouldnt it be higher than 35mb if u have allocated 350 MB like 150 or something?
Edit: m also not in favour of reducing gpu ram....
Sent from my LG-P999 using Tapatalk 2
Wow you guys did it... mad props and respect haha, I will wait test it until radio is fixed I havent flashed anything forever after hearing p990 is getting cm9 and that we might get cm10 so few more days
The p990 source drop happened today. Brace yourselves
Sent from my LG-P999 using xda app-developers app
joeyxl said:
The p990 source drop happened today. Brace yourselves
Sent from my LG-P999 using xda app-developers app
Click to expand...
Click to collapse
Yesterday*
My build is based on them
With the source, can you fix the battery meter issue?
Sent from my LG-P999 using Tapatalk 2
now do we need to make a user thread for this?
G2x-CM7 Weekly 12/09/12 Build, Trinity T15 Kernel
fduong97 said:
With the source, can you fix the battery meter issue?
Sent from my LG-P999 using Tapatalk 2
Click to expand...
Click to collapse
I'm pretty sure they said it was an OS problem. Would have to be fixed by modifying the cyanogenmod sources. The same with the RIL
@Mazout360 where's your repo on github, so that everyone can see what changed (in case of bugs and stuff).
adampk said:
@Mazout360 where's your repo on github, so that everyone can see what changed (in case of bugs and stuff).
Click to expand...
Click to collapse
I hope this discrepency won't get Mazout360 booted off xdadevelopers, like happened to someone else, because he is probably making changes very quickly to get his work "out the door" and will document it ASAP.
Core Memory said:
I hope this discrepency won't get Mazout360 booted off xdadevelopers, like happened to someone else, because he is probably making changes very quickly to get his work "out the door" and will document it ASAP.
Click to expand...
Click to collapse
R u referring to his git? Just relax... he has one... I would let him talk
Sent from my LG-P999 using Tapatalk 2
adampk said:
@Mazout360 where's your repo on github, so that everyone can see what changed (in case of bugs and stuff).
Click to expand...
Click to collapse
Core Memory said:
I hope this discrepency won't get Mazout360 booted off xdadevelopers, like happened to someone else, because he is probably making changes very quickly to get his work "out the door" and will document it ASAP.
Click to expand...
Click to collapse
Yes I had a git before (when I was doing my first betas) but it is private. I will create a github account and upload my files before the next release (that's a promise). I want to make it clean and leave dev. notes for everybody to understand what I did. My kernel source is on my ubuntu which doesn't have an internet connection so didn't have time to transfer it and upload yet.
OP updated with github link and 1,2GHz OC (kept stock voltage to reduce risk of issues with beta). Tested long enough for stability.