Help, i recently rooted my G2x. i really wanted ics so i downloaded rom manager and titanium backup. i backed up everything, then i downloaded the cloadmod then i downloaded hellfire sandwich 1.7, everything was going right but when my phone rebooted it just stays in boot screen with the LG sign. idk what to do, im scared please help.
-Thanks
MyNameMikee said:
Help, i recently rooted my G2x. i really wanted ics so i downloaded rom manager and titanium backup. i backed up everything, then i downloaded the cloadmod then i downloaded hellfire sandwich 1.7, everything was going right but when my phone rebooted it just stays in boot screen with the LG sign. idk what to do, im scared please help.
-Thanks
Click to expand...
Click to collapse
What I would do is go into cmw ( hold power button +volume down ) mount your phone to PC / laptop, re-download the .zip to flash, factory reset then wipe cache then wipe dalvic cache then flash the ROM again .
If I helped you, push the thanks button for goodness sakes!
the thing is, i cant. it stays inn that screen in the "LG" screen it wont even go into recovery
Never use rom manager to install a rom, it doesn't work on our phone.
You need to install clockwork mod (also known as CWM, I can't stand people calling it CMW because that doesn't make any sense) by using NVFlash. Follow this guide: http://forum.xda-developers.com/showthread.php?t=1056847 I recommend installing 5.0.2.0
From clockwork mod you can install and ROMs you want.
Related
I'm a noob and I tried to install 3e recovery using the instructions and video supplied in this post http://forum.xda-developers.com/showthread.php?t=1105413
Everything seemed to work fine until I went into ROM manager and tried to backup current ROM (stock, rooted). I selected backup ROM and now my phone is sitting with the SAMSUNG logo and it hasn't moved from that in almost an hour. I'm not sure what to do to get the phone to boot up normally. I have done a battery pull but that didn't work. When I plug the phone into my computer, XP does recognize that is plugged in because it shows the internal and external sd cards in the My Computer window. I can't open either on by double clicking on the icon for each drive. I'm getting pretty desperate because I can't seem to figure out how to get the phone to boot normally. Any help and/or suggestions would be most helpful. Thanks!!!
Odin flash to stock in dev section
try a hard reset. you shouldnt pull batteries unless it is the last resort, linux needs to unmount the file system.
a hard reset(different from a factory reset) is accomplished by holding the vol up +vol dn + power at the same time untill the phone reboots. if you wait till the samsung screen pops up again and immediately release you may also enter 3e recovery mode.
try to just boot the phone into the ui first. if it is still ok, go into rom manager and "flash cwm recovery" choose captivate or i9000. reboot into 3e recovery(blue text), (select reboot recovery not backup) reinstall packages twice! you should now be at a green text cwm recovery. once you get it setup the backup link in rom manager should work.
if the phone fails to boot up after a hard reset, you can attemp to clear user data in 3e recovery. you can get to 3e with phone off(you may pull battery now if you need to) hold vol up+ vol dn + pwr and hold untill you see the "samsung" screen. then you can clear data/factory reset
if that doesn't help you can still use odin/heimdall to restore the phone with one of the roms that may already have modded 3e recovery and other nice features.
Thanks for all your help! I managed to get it back working using Odin. Now I'm on the Infused ROM and loving life. I'm going to save this post just in case I get into trouble again down the road.
Sent from my SAMSUNG-SGH-I997 using XDA App
Dani897 said:
try a hard reset. you shouldnt pull batteries unless it is the last resort, linux needs to unmount the file system.
a hard reset(different from a factory reset) is accomplished by holding the vol up +vol dn + power at the same time untill the phone reboots. if you wait till the samsung screen pops up again and immediately release you may also enter 3e recovery mode.
try to just boot the phone into the ui first. if it is still ok, go into rom manager and "flash cwm recovery" choose captivate or i9000. reboot into 3e recovery(blue text), (select reboot recovery not backup) reinstall packages twice! you should now be at a green text cwm recovery. once you get it setup the backup link in rom manager should work.
if the phone fails to boot up after a hard reset, you can attemp to clear user data in 3e recovery. you can get to 3e with phone off(you may pull battery now if you need to) hold vol up+ vol dn + pwr and hold untill you see the "samsung" screen. then you can clear data/factory reset
if that doesn't help you can still use odin/heimdall to restore the phone with one of the roms that may already have modded 3e recovery and other nice features.
Click to expand...
Click to collapse
hi dani, i got the same case. but mine cannot boot into CMW. my PC does not detect. any idea??
did you get this fix, I am having the same issue.
So u should use gtgs ultimate unbrick then follow this.
1: Root using super one click
2: Download 3e recovery save it to your SD card
3: Use root explorer to move the 3e recovery file to systim bin overwrite recovery file
4: Reboot phone
5: Download Rom manager and click flash clock work mod pic i9000 not the (mtd)
6: Once its done select reboot in recovery
7: In recovery click RE-INSTALL it should load then click re-install again and u should get green cwm then reboot and flash away
Sent from my SGH-I997 using XDA Premium App
LG_iiNsTiiNcT said:
So u should use gtgs ultimate unbrick then follow this.
1: Root using super one click
2: Download 3e recovery save it to your SD card
3: Use root explorer to move the 3e recovery file to systim bin overwrite recovery file
4: Reboot phone
5: Download Rom manager and click flash clock work mod pic i9000 not the (mtd)
6: Once its done select reboot in recovery
7: In recovery click RE-INSTALL it should load then click re-install again and u should get green cwm then reboot and flash away
Sent from my SGH-I997 using XDA Premium App
Click to expand...
Click to collapse
This is an old useless method... just Odin flash the community kernel v8... done..
Sent from my SGH-I997 using XDA App
I have had that same boot screen problem too, buy a jig and u can put it into download mode that way then when you use odin3 to restore stock, u can get the stock rom with the recovery in it for u and u just need to download the update.zip on rom manager and then go into recovery and run the update zip twice. http://forum.xda-developers.com/showthread.php?t=1092021
You should get a jig (http://www.ebay.com/sch/i.html?_nkw...dkw=jig&_osacat=0&_trksid=p3286.c0.m270.l1313) its a life saver in my opinion. because u can restore ur phone if u ever mess up.
I too am stuck at the Samsung logo. I've used Odin to revert to stock but I think the Stock I reverted to was AT&T rather than Rogers? I can't seem to find the Rogers stock. I've tried to get it into recovery mode, taking out the battery booting with power up and down, releasing power when the Samsung logo came up - no good, the logo stays. I'm at a loss? Any advice? Is the a full raft of pit / pda etc files for Odin that I can make the Rogers Infuse as it was day one?
Thanks for any help
I'm in the same boat... maybe it's because the rogers infuse comes as android 2.3? I hope a solution comes out soon!
Same here, Rogers Infuse. Stuck at Samsung logo. Tried infuse odin recovery, and community. Still no go. I tried flashing all the different stock/unbrick roms but nothing.
However, if I install Infused kernel/recovery, i can access the recovery and do a wipe/lagfix.
I was trying to flash to Infused and when I got to the step where the phone rebooted to CWM recovery it hang on the Samsung logo. After about 3 hours of trying various button resets the phone booted normally (ie not to CWM). They say the definition of insanity is trying the same thing over and over and expecting different results, well I went back through the same steps to flash to infused and again it froze on the Samsung logo, only I have no idea what I did last time to get it to boot normal, not to CWM. Since it did it before, there must be a combination...anybody know what it might be. I've read and tried everything on the forums. Thought I'd post here prior to using Odin. I am able to get to downloading screen by doing the button/USB cable combo.
I'm headed out of town and won't check this right away, but thanks for any posts with ideas.
xoltrix2000 said:
Same here, Rogers Infuse. Stuck at Samsung logo. Tried infuse odin recovery, and community. Still no go. I tried flashing all the different stock/unbrick roms but nothing.
However, if I install Infused kernel/recovery, i can access the recovery and do a wipe/lagfix.
Click to expand...
Click to collapse
Rogers Infuse users need to use the UXKG3 unbrick, not the UCKD5 or E3 unbricks.
The UXKG3 variant tends to fall to the second or third pages of the dev forum since it's far less commonly used.
Holy Crap - im hooped without my phone for work...!
reposting in new thread
Hi guys,
Here is the solution for this issue.
Just flash with this package that will totally reset your Infuse 4G to UCKJ4, do it with linux that worked for me.
Thanks to AdamOutler
Here is the post:
http://forum.xda-developers.com/showthread.php?t=1331381
After that just root, flash a new kernel and your Recovery Mode will resturs.
samsung infuse 4g rogers version stucked on samsung logo(rooted)
my samsung infuse 4g rogers version rooted with odin and with cynogen mod os running phone got strucked when changing the os to Infuse_4G_Remics-UX_v1.3.1.zip .it's showing only samsung logo and not booting to recovery screen when trying to get recovery ......anyone please help me regarding this problem.....it will be great help to me and most loving [email protected]
samsung infuse 4g (I997R) rogers version got stuck samsung logo
my samsung infuse 4g (I997R) got stuck samsung logo since 4 days...my phone was rooted by use of odin later i changed my os from 2.3.3 to cynogen os.later my baboon brain provoked me to change to Infuse_4G_Remics-UX_v1.3.1.zip .i was my mistake -my phone got stuck with samsung logo and not booting its my favorite phone ever i had...please let me know anyone how to solve the problem in this regard......it will be big big help to me....and i will thankful to them,,,,,,,,,,,,,my email id
[email protected]
rajeshvarma999 said:
my samsung infuse 4g rogers version rooted with odin and with cynogen mod os running phone got strucked when changing the os to Infuse_4G_Remics-UX_v1.3.1.zip .it's showing only samsung logo and not booting to recovery screen when trying to get recovery ......anyone please help me regarding this problem.....it will be great help to me and most loving [email protected]
Click to expand...
Click to collapse
Go here: http://forum.xda-developers.com/showthread.php?t=1326143
The few last posts have mirrors. You are gonna need the odin pack to flash back to stock and then work your way up.
You need to flash ICS before flashing JB.
Infuse 4G wont boot - no root, CWM, Passcode locked
Hi guys
I dont know where to start from. This Infuse 4G was dropped by the owner and we happened to come across it.
Checked the SIM card but that was already deactivated and there were no contacts on it.
Then we wanted to check the phonebook and find someone to contact, but the phone was passcode locked.
Then i went and flashed Odin_Community_Kernel_v8.zip since it was on GB, but it doesnt seem to be booting. I was planning on adb-ing into it when it was in recovery (CWM) so that i could delete the passcode and find a way to get in touch with the owner.
Now am stuck at the Samsung logo...:crying:
OK, so I was in the process of trying to flash Infused V2 beta 3, and just downloaded the 3e recovery and put it in system/bin and rebooted and all was good, was trying to install CWM from ROM Manager. ROM Manager said it sucessfully installed CWM 2.5.0.1 or whatever the latest version is. I decided to try to reboot into recovery from within ROM Manager and now I'm stuck at the Samsung logo. What do I do?
dufrenbk said:
OK, so I was in the process of trying to flash Infused V2 beta 3, and just downloaded the 3e recovery and put it in system/bin and rebooted and all was good, was trying to install CWM from ROM Manager. ROM Manager said it sucessfully installed CWM 2.5.0.1 or whatever the latest version is. I decided to try to reboot into recovery from within ROM Manager and now I'm stuck at the Samsung logo. What do I do?
Click to expand...
Click to collapse
hold the three button combo till it reboots and let go when you see samsung. (power and both volumes)
if that doesnt get you into recovery(3e blue recovery once here you reinstall packages twice) then hold three buttons again but let go when the screen goes black. if the phone doesnt boot it is in a semi brick situation . likely a premission problem or a corrupt recovery file.
odin may be needed to flash the phone.
a voodoo kernel like "defuse" may fix it as it will redirect the phone to cwm recovery not 3e (get the .tar file not the .zip file) it will do a voodoo conversion you will hear robot voices and it may take 10min so dont jump to conclusions.
if the kernel doesnt work then flash the unbrick package.
Well I just used odin to get me back. Thanks.
Ok now I have another problem. I just noticed that every time I reboot the phone, Handcent SMS basically reinstalls itself or something. Any setting or theme changes I make don't stick when rebooted. Any ideas? Man I'm angry. All I want is to flash Infused V2 Beta 3!
EDIT: and Tango does the same thing. I'm sure others will do it too, just havent reinstalled everything yet
ttttthhhhhiiisssss ssssssssuuuuuuuuuuxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
FYI, I'm trying a factory reset right now
Factory reset got me back to... well... factory unfortunately
After flashing the latest ROM I was messing around with (WajkIUI 2.1.6) the phone would crash and reboot within 30 seconds of booting up. The previous ROM that was running was FAUXMIUI_RG2xV2.0.0 (01/08/2011 [v2.0.0]OVERCLOCK) that was stable except for when I’d turn wi-fi on after being off for 8 hours or so phone would reboot.
I figured I would boot into ClockworkMod Recovery and restore one of the nandroid backups, I tried booting into recovery I found out that I could not. When I hold the volume down and press the power button I see the screen that says software update (like when flashing with OneClickRecoveryFlasher).
Whenever I flash a new ROM I will Wipe data/factory reset, wipe cache partition, and then wipe dalvik before installing zip. I’ve always run cyanogenmod nighties; FAUXMIUI_RG2xV2.0.0 was the first MIUI ROM I’ve used.
When I run OneClickRecoveryFlasher, I do not see any errors on the command prompt so I am assuming it was successful, or at least thinks it was.
I tried to Restore LG G2x Stock Recovery using OneClickRecoveryFlasher and then flashing v5.0.2.0 and still no ClockworkMod Recovery, also tried v4.0.1.5 and still no ClockworkMod Recover.
I then tried http://forum.xda-developers.com/showthread.php?t=1248644 and with that I was able to get back to stock 2.3.3, tried to use OneClickRecoveryFlasher to flash ClockworkMod, still no go.
I tried LG Mobile Update and that proceeded to install something, not really sure what the update was, after the update finished, phone rebooted into stock 2.3.3. Shut the phone down and tried to flash ClockworkMod and still nothing.
I did a hard reset following http://mobilephonerepairguides.blogspot.com/2011/04/lg-g2x-hard-reset.html
I also tried http://forum.xda-developers.com/showthread.php?t=1183168, that got me to stock 2.3.3 but I still could not boot in to ClockwordMod Recovery.
I’m having a hell of a time wrapping my head around what I screwed up. Did I somehow destroy the recovery partition, is that possible? Any ideas what I broke and how to fix it? Can I used adb to view the partition table, would that tell me if something was corrupt?
Any help and ideas would be appreciated, I have tried doing my due diligence and I apologize if I missed something obvious.
Thanks,
-Matt
Faux never made a miui
Did you nvflashed recovery? If no then do that first.
NVIDIA NEVER AGAIN!
If you did the LG Updater it returned your phone to stock everything, including recovery. You need to use NVFlash (One Click method okay) to reflash CWM and then you should be good to go.
When the phone is completely off, hold volume down, then hold the power button and don't let go of both until the second lg logo.
If you hold volume down too early it'll give you the software update screen.
Well that's embarrassing, thanks buru898 that did the trick and got me into CWM Recovery. I never remember holding the power button for that long but it worked and I'll remember that for next time.
Thanks
fcisco13 said:
Faux never made a miui
Did you nvflashed recovery? If no then do that first.
NVIDIA NEVER AGAIN!
Click to expand...
Click to collapse
Sorry, I only wrote in the actual zip file name, I meant RG2x-MIUI v2.1.6-MultiLang/Powered by Faux Kernels CM v0.4.8(01/08/2012)[v2.0.0].
Thanks
When I installed it on my phone, it will not load the ICS rom, it is stuck on the LG logo. I tried to put it back into recovery mode. It will not do that either. I think my phone is bricked. What should I do?
I can really use some help please.
Get the g2x scrubber. Just go to the Phoenix blood thread under development. You will find the download on the first page. Download it, then go into recovery and install the scrubber like you would a rom. It will wipe all your data. Make sure you have a nandroid backup. It won't get wiped if you use the scrubber. Wipe dalvik and cache. Then install the rom.
Sent from my G2X
Hellfire Phoenix
I can't do anything to my phone. It is sstuck on Android System Recovery <3e>. I can move around but I cannot select anything. I am trying to select with the power button, but it is showing "formatting data ..., formating cache ..., formating misc ..." I am really stuck.
Pull the battery out. Plug it into the wall. Hold power and volume down at the same time while the battery is out.
Sent from my G2X
Hellfire Phoenix
If that doesn't work try holding power and volume down WHILE plugging it into the wall. Remember the battery is removed for all of these steps
Sent from my G2X
Hellfire Sandwich ICS
One-Click NvFlasher
Hi, have a look at the thread below, might help.
http://forum.xda-developers.com/showthread.php?t=1056847
The screen is flashing, and switched off. I put the battery in, and then I ended up taking it out once in recovery. Idk what to do. I totally messed up this phone.
How can I do that if my phone keeps flashing when I hold down the buttons?
Did you try plugging the USB in while holding the buttons?
Sent from my G2X
Hellfire Sandwich ICS
Plugging it into the wall or plugging it in from PC?
wall
Sent from my G2X
Hellfire Sandwich ICS
Are you booting into clock work mod recovery from phone being off? Cause the list you said you tried to select does not seem like the first set of options you would normally see when booting into recovery to flash any roms. How did you flash ics? Just curious and I would glad to help
Sent from my LG-P999 using xda premium
When I boot the phone, I try to put it into recovery mode. I get a screen with it trying to format some stuff. Then it let's me select stuff in 3E Android recovery, but it won't let me select an option. If I try to boot it up normally, the screen is frozen on LG with an ICS theme. I just put the file on my SD card, ran a reboot, created a backup, and just went to load a file off the SD, and I manually selected ICS cyanogenmod 9. Plugging it in the wall fails because the phone flashes on and off.
How did you flash CWM onto your phone? Did you do it through Rom Manager or by using NVFlash.
Rom Manager doesn't really flash CWM, it "fake-flashes" CWM.
You have to use NVFlash to put CWM on your phone. Go to the thread mentioned by Philippp, and follow the instructions.
I tried the Rom Manager flash when I first got my G2x and ran into the same thing.
Good Luck!
PartzMan2
T-Mobile G2x, overclocked to 1400 Mhz
ROM Hellfire Phoenix v1.9
Kernel Trinity Kernel T-15 (1560 Mhz)
Oh, I used rom manager. I just need to get instructions how to get NVflasher because it gives me issues when I download it. Either it is for 32 bit or gives me a command prompt. I tried it and that didn't show a link.
Let me find you the right thread to get started... first you have to root n install a custom recovery before you can install custom roms
http://forum.xda-developers.com/showthread.php?t=1056847
Sent from my LG-P999 using xda premium
I already rooted the phone. I had a custom rom installed, but I chose to use a different one for ICS.
Win Rar is not helping with the RAR file since the APX file has nothing in it. I need NVflasher.
kompheak said:
Let me find you the right thread to get started... first you have to root n install a custom recovery before you can install custom roms
http://forum.xda-developers.com/showthread.php?t=1056847
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
I keep on getting a USB can't find.
Okay, so I rooted my LGG2X and downloaded Eagles Blood ICS build, and flashed it via rommanager, this was my first time doing this and I didn't think I would brick my phone but I did. It's stuck in the boot screen everytime I turn it on, it goes past the LG logo and stops at the Eagles Blood logo then the screen goes black after awhile. My biggest problem is, the phone WILL NOT boot into recovery, i've tried and tried. The vol up and down and power button all at the same time and NOTHING happens. I also tried to get back to STOCK using Nvflash but it just wasn't working for me. Can someone please help me? lol im stuck using a non android and it's absolutely killing me
http://forum.xda-developers.com/showthread.php?t=1054492
Rom manager doesn't work on this phone. You have to follow this method to flash cwm and then you'll be good to go
TwitchyEye said:
http://forum.xda-developers.com/showthread.php?t=1054492
Rom manager doesn't work on this phone. You have to follow this method to flash cwm and then you'll be good to go
Click to expand...
Click to collapse
Oh, and a properly installed version of EB needs vol+power button. The recovery option doesnt work.