[Q] i cannot boot up since i flash the room - General Questions and Answers

i cannot boot up after flashing the new room of (ics 4.0.4 6/1)
Just hangs at Google screen
the room is from this web of http://forum.xda-developers.com/showthread.php?t=1672010&page=5

You need to use Odin or whatever that Samsung jazz is and reflash it. Sounds like you messed up somewhere. Next time post in the Rom thread or your own phone section. You'll get a better and faster response.

Do This
hoddylau said:
i cannot boot up after flashing the new room of (ics 4.0.4 6/1)
Just hangs at Google screen
the room is from this web of http://forum.xda-developers.com/showthread.php?t=1672010&page=5
Click to expand...
Click to collapse
Bro, I had the exact same issue. What you need to do is go back to gingerbread using Kies. Once you have done that then you can root using Odin and then once you have root, stick the rom on your sd card and flash it through your phone. It is however important to note that while using Odin, make absolutely sure Kies is not running. Kies and Odin do not like each other at all and can cause devastating interactions. Just uninstall Kies before you use Odin and then restart your pc. Also, once you have your custom rom on you need to delete all the old drivers for your samsung usb. Then reboot your pc, download new samsung drivers, install them and reboot again. You should be good to go then. The drivers can come in a package with samsung kies, so unfortunately you need to reinstall kies again to get those drivers(Samsung USB Composite Device Drivers). Anyways bro, it is not that complicated once you manage to get the new rom on your phone and you will be glad you did it. I know I was, it took me a week but I finally did it. Hope that helps bro, good luck. And do not stress, our phones are really hard to brick once you get rid of samsung nonsense.

http://forum.xda-developers.com/showthread.php?t=1513359
This post is in the same forum as you linked above. It should help you recover this phone from a bad flash/rom.

Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Moving to Q&A

Related

samsung stratosphere help

i need some help rooting my strat i been following this guide http://rootzwiki.com/topic/7840-kernel-guide-root-your-stratosphere/
and i already flashed the kernel already and im on the part where u need to put your phone into usb debugging and so i plug my phone in and let it install its drivers and then i open up CMD in windows and i copy and paste this command F:\Downloads\heimdall-suite-1.3.1-win32>adb devices
to see if it detects my device and it just says device not ready... soo that is where i am stuck at i have downloaded and installed android sdk and did the updates with it and i close out of it and then do the same thing in cmd and still says device not ready..... im lost
i placed android sdk under the root of my C drive called android im running windows 7 64bit
redid the WHOLE walkthrough went and reinstalled adk, and re doing the kernel file to the phone and now im back at the same part but now i get this, there is no disk in the drive please insert a disk into the drive /device/harddisk2/DR2.
and all i get is cancel try again and continue and when i do it again its the same thing..... it seems this is just a simple thing but being stupid
ill donate 15$ to who ever helps me and completes this with me lol
good job? lol didnt do anything
Did u get it I'm in the middle of rooting mmine. Still seting up adb on new laptop.
yea im still stuck BUT someone on a different forum gave me this http://rootzwiki.com/topic/9711-untested-odin-for-stratosphere/ but im a little scared to test this because this is the only phone i have
rooting thur odin right now.... wish me luck
well that didnt work and bricked
does anyone have the stock files to odin back to stock?
.
Thread moved. Would advise you to read forum rules and post in correct section.
Failure to comply with forum rules will result in an infraction and/or ban depending on severity of rule break.
I can't seem to find a Clockwork Recovery install anywhere and was wondering what the progress was in the port? I seen that someone posted they were working on it on the root thread and need to know if any updates on it? I know there are a ton of people that won't go without a slider and seeing as this phone is the only 4g slider right now I figured there would be all kinds of rom support for it. Its unlocked bootloader was the reason i got it along with my fiancee's need for a keyboard. First time i seen any android device without cwr.
cydetrakd said:
I can't seem to find a Clockwork Recovery install anywhere and was wondering what the progress was in the port? I seen that someone posted they were working on it on the root thread and need to know if any updates on it? I know there are a ton of people that won't go without a slider and seeing as this phone is the only 4g slider right now I figured there would be all kinds of rom support for it. Its unlocked bootloader was the reason i got it along with my fiancee's need for a keyboard. First time i seen any android device without cwr.
Click to expand...
Click to collapse
Ill donate to a dev who doesnt have the phone buts wants to dev
Sent from my SCH-I405 using Tapatalk
samsung stratosphere trouble!!
Hi everyone. I was looking for some help to fix the samsung stratosphere that i tried rooting the other day. I will explain to the best of my knowledge as to what i did and how i got where i am with trying to root my phone and where i believe things went bad. i downloaded heimdall and all the necessary files that i got off of the rootzwiki forum specifically for rooting this phone. I was following the instructions exactly as they are posted. Well i than tried to use a different method within heimdall called heimdall - front end. i tried flashing the kernel from the rootzwiki forum using this method. i loaded the stratosphere.pit and went to the flash menu and checked repartition and reboot phone and clicked flash. Thats where the trouble began,now it seems that my phone is stuck in a bootloop,where it will either go to the screen where it asks if you wanna flash a custom rom or it will go into recovery mode if i try to reboot the phone. When my phone is plugged in, it dont show thats its charging but the power button will work sometimes or i just have to hold the power and volume down button and it will go to the custom rom screen. If anyone could help me figure this out,it would be greatly appreciated and thanks in advance for any help or advice on my situation.

[Q] Please help me with flashing my device.......

Please help me with flashing my device. I am new to this matter and I have nowhere to go. I hope that this will help me.
So, my problem is that I want to upgrade their devices to Android 2.3, please tell me step by step how to start and tell a good stable firmware is desirable to support Voodoo.
Had never sewed Android device.
I would really appreciate
Samsung T959V
Android 2.2.1
You don't need to flash anything if you just want to run gb. Connect your phone to samsung kies and it will update your phone to the latest gingerbread.
Sent from my SGH-T959V using xda premium
dualkiller said:
You don't need to flash anything if you just want to run gb. Connect your phone to samsung kies and it will update your phone to the latest gingerbread.
Click to expand...
Click to collapse
Indeed. The current stock gingerbread you will get from kies is more stable then anything in this forum.
There are some really cool froyo roms in the dev forum, but even so, if you don't know why you want to flash your phone, stick with stock. If you know why you want to flash your phone, but are looking for resources to help you. Then look no further then the search button at the upper right side of the forum page on your browser. Google also works.
dualkiller said:
You don't need to flash anything if you just want to run gb. Connect your phone to samsung kies and it will update your phone to the latest gingerbread.
Sent from my SGH-T959V using xda premium
Click to expand...
Click to collapse
I would like to upgrade not only to the official version, I want to try something more interesting and more beautiful on. I have read many reviews of firmware developers who make and spread on this forum, so I would like to try
vitalexx said:
I would like to upgrade not only to the official version, I want to try something more interesting and more beautiful on. I have read many reviews of firmware developers who make and spread on this forum, so I would like to try
Click to expand...
Click to collapse
Well, I'm not here to tell you what to do. Just want to give fair warning that even though the roms in this forum are for the SGH-T959V, you can still brick your phone by not paying attention and not reading all of the instructions to the T.
These mods will void your warranty. Luckly there are services out there that will unbrick your phone and jigs that will help to get your phone into download mode.
Download mode is for flashing with Odin or Heimdall. I prefer to show users how to use heimdall, as it is open-source and runs on Windows, Mac OS X, and Linux.
You can get into download mode three different ways. The first and easiest way is to download and install the Android SDK from http://developer.android.com
After you install it, run 'android' and install the platform-tools.
You should now have a command called 'adb', which has sub commands like: logcat, shell, and reboot. reboot also has options to say to reboot to what. Like
Code:
adb reboot
to just reboot the phone,
Code:
adb reboot recovery
to reboot into recovery, and
Code:
adb reboot download
to reboot into download mode.
The second way is to hold down the volume+ and volume- buttons on the left side of the phone while plugging in your usb cable attached to your computer. After you see the Download Mode screen, let go of the volume buttons.
The third way is a last resort. Use a usb jig.
If you can get into download mode, then you are NOT bricked.
I've also made a Heimdall One-Click that will get you 2.3.6 with ClockWorkMod(aka CWM. This is the SMS KJ6 One-Click on that page) and root. You can also flash the KJ1, which also has cwm and the same KJ6 Stock Rom and root. And last there is the Fully Stock One-Click which will leave you totally stock, and unrooted.
After you have a kernel with CWM installed, you can flash any rom in the dev forum, if it looks like the users of the thread are happy using it. Otherwise, stay away from it, until people say it is safe.
Do not use Rom Manager. It does not work, yet. Hopefully I will fix that very soon.
Anyways. I'm sure others will chime in, but that will get you started... if you want to void your warrenty.
---------- Post added at 03:39 AM ---------- Previous post was at 03:29 AM ----------
You will get a big kudos from senior members and developers if you search, read, and search some more before posting. It is in the rules in my signature, as well as a bunch of other helpful links.

[Q] Samsung Vibrant T595 Bricked. Is all hope lost?

Hi I have a Samsung Vibrant T595. To make a long story short, all that comes up is the screen with the phone yellow triangle with the ! and the computer. I cannot get it into download mode. I can't get adb to see it. So am I out of options to fix it? Someone please help if you can I would really appreciate it.
You can Odin from that screen. It happened to me on my old Vibrant. Odin to stock and then try whatever you were doing again.
the com screen doesn't come up at all even with odin opened with administrator priviledges. EDIT: Thanks for your input JR, somehow with a mix of either reinstalling the samsung usb drivers, running oneclick.jar and keeping Odin open the com came on and I fixed it. Do you know anywhere I can find a custom recovery image for this phone? and/or the stock update to kb5 is it? I can't get kies or kies mini to fully download the update. No idea why.
Vibrant forum right here at xda is your best friend.
yeah ive found the custom recovery image and threads for the kb5 update but they dont work. I was just wanting it in case I ever have to go back to stock I could go to 2.2. instead of 2.1
So no drivers detected? Have you checked in device manager?
Did you accidently flash vibrant 4g files?
Swyped From Space Using My ICS Flavored Sensation
Virtuous Inquisition 3.0
please delete thread
admins i solved my problem please delete this thread I can't figure out how to. no option for it in thread tools.

[Q] T-Mobile SGS 4G Problems

I've been having hours of issues with this damn phone and I'm just short of throwing it in the wall.
After trying for hours by rebooting both computer and phone, installing and reinstalling drivers, trying odin continuously I finally got the phone to update to 2.3.6 Gingerbread from my rooted 2.3.3.
After, I tried rooting the newer 2.3.6 and it seems I took two steps backward. The phone has been stuck with a "Firmware upgrade fail! Try using recovery mode message" for hours now. Odin is stuck at either "Initialization" or "Setup Connection" when I try loading 2.3.6 again.
HELP Please! This thing is driving me nuts.
--Yes I've searched all over for a solution and still didn't find one that worked.
Is odin recognizing your phone?
Yes it's detecting the com port. But keeps stucking after flashing starts. I've tried changing ports and it's the same ****.
If it's deteting the phone you'll be fine. What are you trying to flash. If you want stock I'd use this:
http://forum.xda-developers.com/showthread.php?t=1353176
Then you'll need to dl one of these for odin to get root.
http://forum.xda-developers.com/showthread.php?t=1194032
wish i was as confident as you mate...screenshot attached.
Yeah its stalled on you. DL the first file I linked you to. Shut down odin. Leave your phone in dl mode. Restart Odin. Follow the OP. Plug phone into odin. Flash. It's possible you have a bad DL and that's what's causing odin to hang.
hechoen said:
Yeah its stalled on you. DL the first file I linked you to. Shut down odin. Leave your phone in dl mode. Restart Odin. Follow the OP. Plug phone into odin. Flash. It's possible you have a bad DL and that's what's causing odin to hang.
Click to expand...
Click to collapse
Will do mate thnx. I'll start again. I've seen reports that people successfully root using drhonk KJ1 so I'll use that once the ROM loads fine.
/sigh
You'll be able to root no problem with one of honks kernels. After that you will have CWM3. You should then DL this:
http://forum.xda-developers.com/showthread.php?t=1513287
Then flash it through CWM. That kernel will get you to CWM5 so you'll be able to do nand backups and restores. Let me know how it goes.
Finally got in going mate. I changed the pc then followed your recommendations. Rooted
Now to update to latest CWM.
Yeah odin can be a liitle tempermental at times. Glad you got it. Let me know if you need anything else. Just so you know there are some really good custom ROMs in the dev section if you wanna go that route.
Certainly thanks much. Will take a look at those.
No worries.
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Moving to Q&A

S5670 won't start after unrooting

I tried to unroot my phone but it made my play store crash consistently so i tried and tried to wipe my device and tried to install a stock rom (i was completely new to android so i chose the wrong one i think) and it now doesn't start it just gets stuck on the boot screen that says galaxy fit. now i have a usb cable and i plugged it in and installed odin as per the guide for newbies (found here: https://forum.xda-developers.com/showthread.php?t=1606380) but my phone isn't showing up. I have installed the appropriate drivers as far as i'm aware and googling doesn't offer any results that are useful to me. My phone's stock rom is S5670VAUQ2 which i managed to find on an alternative to sammobile (i don't really want to pay for one download, and they don't give me the option to do a slow download which i thought they used to) all help is much appreciated and hopefully there are still people who have this phone thanks

Categories

Resources