temple run tilt not working properly
i love temple run but for the past few days the tilt sensor is not working properly
i have to completely tilt the phone whereas it used to work nicely initially
what could be the problem
i am using hell fire phoenix with faux 0.50
i tried to adjust the inbuilt increase in sensitivity but that is only for swype
please i need urgent help
thanks
Did you change ROMs or kernels right before this problem started?
Yes he did, nothing in the game changed it doesn't play well with custom cm7 kernels Trinity or faux, haven't tested harsh's custom cm7 test kernel though. Next time search there are 3 threads on the subject now.
Sent from my LG-P999 using xda premium
ya i did search and changed the rom but what is the solution
i did a search but all the posts were related to temple run vfx problems
can i solve the problem by some method or do i have to change the rom againn ?
On my phone without searching lol
http://forum.xda-developers.com/showthread.php?t=1577303
Try stock kernel, one in Dev section made by dumfuq I believe, or reflash rom and don't install kernels... this is just rumored I don't know if stock cm kernel is temple run friendly.
Just remembered I'm on stock kernel and its tilt friendly for me on cm7 rc3
Sent from my LG-P999 using xda premium
Just to add, it does work on stock cm7 kernel because I am on gigglebread and it works fine for me.
Sent from my LG-P999 using xda premium
Runs fine on EB ICS build 3. There were kernel related issues with build 1 and 2.
Related
Hello XDA
I am loving this new build for MIUI I am running the new 108050 and I was wondering what kind of Kernal I can run with this rom or if you can help me figure out my problems.
In the OP jface states that one of the bugs that needs to be fixed is get the kernal support up to date because it would support anything up until nightly 85
I have downloaded fauxs kernals from 3.3 onward and everytime I load the kernals I get no sound and things start to get buggy?
Does the new Rom have this kernal issue fixed or do I just have a special phone
Same here
Sent from my LG-P999 using XDA Premium App
Likely that it doesn't play nice with these kernels
Miui doesn't play nice with the CM7 Kernels. It has bugs, even wit hthe new version(I had two battery pulls yesterday and some apps don't run). I tred Faux's kernel and wasn't able to hear calls....so I stuck to stock. It almost works, and with it being so pretty, that's enough for me.
I had read somewhere that morfic's trinity kernals play are compatible with MIUI...but that the camera can get a little wonky at times- and i have experienced this with the 1.7.29 version where the colors get messed up- but has anyone tried the trinity kernal on the 1.8.5 yet?
Thank you for your response I really do love MIUI I just wanted to undervolt
I just installed the [Kernel]CM7 [2.6.32.45] on my phone with CM7 already installed. when I turned on the device after the LG logo my screen turns black?!! What coulfd be the issue...I apologize if i come off as a idiot....
You installed what kernel???
From who?
From where?
Cm7 rom has a stock kernel, so you must have flashed a custom kernel, did you check to see if it was compatible with cm7??
Yes its this kernel [Kernel]CM7 [2.6.32.45]. I downloaded from XDA and it says its compatible with CM7. When i rebooted the G2x from CWM the LG logo showed up and then went to a black screen
Just enable USB connection and put a different kernel on ur phone and flash it. Ur phone obviously can't handle the kernel
Sent from my LG-P999 using XDA App
Also this happened to me when flashing an underclocked kernel from cm7. But then i flashed a different version of it and its now working perfectly i get mad battery.life.
Sent from my LG-P999 using XDA App
noobletsausecakebbq said:
Also this happened to me when flashing an underclocked kernel from cm7. But then i flashed a different version of it and its now working perfectly i get mad battery.life.
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
Which CM7 Kernels could the G2x handle fo.....Im new to the whole kernel thing & im tryna get some help & I want to get more power from my phone.
Each kernel is different for speed, battery life, experimental... so on and so on. Every chipset is different in our phones some can't handle certain kernels.
Sent from my LG-P999 using XDA Premium App
So what kernels would work on any G2x?? Thanks for the tip idk all our chip sets are different.
Sent from my LG-P999 using XDA App
Personally om using latest faux's kernel, I'm on latest nightly - cm7
http://forum.xda-developers.com/showthread.php?p=13678237
Don't forget to wipe cache, wipe dalvik cache, then flash kernel, then run fix permission, reboot, enjoy
Sent from my LG-P999 using xda premium
Sounds they are referring to Faux's Kernel...
You have to match them up properly as CM7 just went through a few kernel changes and the Custom Kernel developers have to make them compatible. I think Faux has .44 out which is supposed to work...
Then you also have 4 options from Faux: Pre-OC/UV or Stock Speeds; and CM and DS battery drivers.
player911 said:
Sounds they are referring to Faux's Kernel...
You have to match them up properly as CM7 just went through a few kernel changes and the Custom Kernel developers have to make them compatible. I think Faux has .44 out which is supposed to work...
Then you also have 4 options from Faux: Pre-OC/UV or Stock Speeds; and CM and DS battery drivers.
Click to expand...
Click to collapse
Thanks yall u helped out alot.............I just installed the WEAPON ROM with the FAUX Kernel & im using Pimp my CPU for OC & UC........Besides Faux what kernels would be good to use on all G2x phones?
Some data would be nice on this issue.
Thanks
I am using the latest Trigger rom.
From all the rom's I tried, i think its the best!
Sent from my LG-P999 /trigger rom using Tapatalk
I'm using Weapon 3 and faux kernel. Reliable. Put Weapon in yor survey list.
Read my signature
I'm running Bionix Realoded. Very fast rom btw
Sent from my G2x running Bionix Reloaded with Dragon-OTA 1.1 kernel
Recently switched to weapon 3 and I love it
Sent from my LG-P999 using xda premium
I'm on stock with root, bloat frozen.
Weapon and Bionix are missing from the poll.
I used CM7 Nightly for a while, i just flashed Bionix Reloaded a couple days ago with Dragon-G2x v1.1.1 and its super fast battery life is a little better then CM7 but i have not found out a way to port over themes but it offers alot of options to play around with
Didn't we have this thread yesterday?
You forgot to list Weapon. Most stable daily rom out there. Everything works. The rom has been abandoned, but it really does not matter. It is that good.
I'm using the eaglesblood kang version. Probably the best cm7 based ROM. Before this I was using weapon
Sent from my LG-P999 using XDA App
Weapon gave me random reboots and it was sort of buggy, so I stuck with EaglesBlood with Faux's 0.4.7 kernel. I feel as if EB is just the most stable rom for my phone at least.
MIUI all the way. From my experience the most stable and the best battery life. At least it is for me.
stormageddon said:
MIUI all the way. From my experience the most stable and the best battery life. At least it is for me.
Click to expand...
Click to collapse
Same, but I like it for its customizable interface without needing other launchers. It's themes are pretty sweet. When can mix and match themes it makes me happy.
Sent from my LG-P999 using xda premium
stock gb. Waiting for cm9
Sent from my T-Mobile G2X using XDA Premium App
Weapon 3.0 with Faux's GB kernel @1. 5 GHZ.
Sent from my G2X
jonathanUSC said:
I'm using the eaglesblood kang version. Probably the best cm7 based ROM.p
Click to expand...
Click to collapse
Same here.
Well I'm still fairly new to this and looking to learn a bit more . I am pleased with my current Hellfire 2.1 now I'm looking to exntend my battery life to the best I can and I was told this can be done with kernels, Soo I was hoping I could get some suggestions and anything that could help me out understand this a bit more.
I am currently using some Faux Kernel that came with the current Hellfire phoenix release.
Lot of people say to use Trinity with this Rom but no one says why nor in the xda page of this kernel say much about what it does, I like to be well informed before doing any changes.
also how do you install a kernel just download and install from zip from clockworkmod recovery like everything else? or is there certain steps to it?
First off this should be in the Q&A...
http://forum.xda-developers.com/showthread.php?t=1073626
Sent from my LG-P999 using XDA
http://forum.xda-developers.com/showthread.php?t=1389069
^^^Fixed link^^^
Sent from my LG-P999 using XDA
Read these link's...
And they should tell you everything you need to know.
http://forum.xda-developers.com/showthread.php?t=1558080
Sent from my LG-P999 using XDA
And yes flash like you would any other zip. Just make sure to do a backup.
Sent from my LG-P999 using XDA
I'm currently testing the trinity kernel, The 1.1ghz one for the better battery. Using hellfire phoenix 2.1 so far its the rom I've enjoyed the most.
Any other kernel that anyone could recommend for the best battery performance I could get I'm pleased with the stock performance of the tegra 2 I have no need for overclocks.
Harsh kernel is the best. Flash it and see for yourself
Sent from my LG-P999 using xda premium
Morfic's Trinity ELP if your phone can handle it as it varies phone by phone. But I also use Faux123's kernels and they work well enough.
Stopfakn said:
Harsh kernel is the best. Flash it and see for yourself
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
Don't flash it because you're using a GB based ROM...
Harshs kernel is for ICS ROMs...
Sent from my LG-P999 using Tapatalk
When choosing a kernel you should first know that they all are, in the most basic sense the same, but have little tweaks that make them all different. I know that the Trinity kernel has the Voodoo sound driver built in that is much better than any other driver. Also when choosing a kernel you need to just try a few and see how stable they are as not all phones are created equal. Some can handle the Trinity kernel and some can't (and same with all others). When you find one that works well with you just stick with it. And, as I like to say, to each his own.
I want a stable rom and kernel. The camera should be able to take 8MB pics and capture 1080p video. If possible I want JB or ICS.
please help. I have been seeking for rom and kernel for a long time. The developers does not give understandable specs like openly for me...
0b095 said:
I want a stable rom and kernel. The camera should be able to take 8MB pics and capture 1080p video. If possible I want JB or ICS.
please help. I have been seeking for rom and kernel for a long time. The developers does not give understandable specs like openly for me...
Click to expand...
Click to collapse
official CM 7.2 is my recommendation.
ICS and JB are not fully working and since you want a stable one I'd stay away from those.
Alright then I guess I need to tell like '' the most stable ROM and Kernel among the JB and ICS. Guys please help me! Camera should work 1080p
0b095 said:
Alright then I guess I need to tell like '' the most stable ROM and Kernel among the JB and ICS. Guys please help me! Camera should work 1080p
Click to expand...
Click to collapse
The only way that will work is on Adampk's and Mazout360's CM10.1 Rom Build 7 which is the only rom that has full HWA to make the camera work properly. Downside is that the Radio (Cellular Network) will NOT work. This means no calls, SMS, data, etc. Anything to do with your Mobile Network will not work.
Yuvin said:
The only way that will work is on Adampk's and Mazout360's CM10.1 Rom Build 7 which is the only rom that has full HWA to make the camera work properly. Downside is that the Radio (Cellular Network) will NOT work. This means no calls, SMS, data, etc. Anything to do with your Mobile Network will not work.
Click to expand...
Click to collapse
hmm I tried Adampk's and Mazout360's CM10.1 Rom Build 7. It did not work it gives me Setup Wizard has stopped error always...... (
If you want stable and fast then I highly recommended Singh-ui.
Sent from my LG-P999 using Tapatalk 2
there is no stable ics/jb yet. Stick with GB and use faux kernal
Sent from my LG-P999 using xda app-developers app
Xura08 said:
there is no stable ics/jb yet. Stick with GB and use faux kernal
Sent from my LG-P999 using xda app-developers app
Click to expand...
Click to collapse
for example what do you use ?
I use Hellfire with faux kernal and I haven't had any problems. The ONLY downside is the battery indicator that comes with it, its kind of annoying
Sent from my LG-P999 using xda app-developers app
Xura08 said:
I use Hellfire with faux kernal and I haven't had any problems. The ONLY downside is the battery indicator that comes with it, its kind of annoying
Sent from my LG-P999 using xda app-developers app
Click to expand...
Click to collapse
can it capture 1080p and is it gb 2.3.7 or what ? also I have kamasha 4.1.1 with stock kernel (which comes with the rom) I guess it is cm 9 so I can hopefully use harsh kernel right ?
Xura08 said:
I use Hellfire with faux kernal and I haven't had any problems. The ONLY downside is the battery indicator that comes with it, its kind of annoying
Sent from my LG-P999 using xda app-developers app
Click to expand...
Click to collapse
You're using the faux DS kernel. Use his regular CM one.
Sent from my LG-P999 using xda app-developers app
0b095 said:
can it capture 1080p and is it gb 2.3.7 or what ? also I have kamasha 4.1.1 with stock kernel (which comes with the rom) I guess it is cm 9 so I can hopefully use harsh kernel right ?
Click to expand...
Click to collapse
If you have problems with Faux kernels try Trinitys. I could never get Faux's kernels to play nice with my phone and while they ran smoother the random reboots, black screens and having to keep phone from sleeping just killed it for me.
This was oh stock voltage as well.
Sent from my LG-P999 using xda premium
guys I think the best rom is http://forum.xda-developers.com/showthread.php?t=1420972 that one for me! At least the developer tells the specs of the rom clearly... I just did not understand how to install v6supercharger, it seems hard to do.
I currently have KashaMalaga (jb 4.1.1.) with harsh kernel 1.4 GHZ everything's looking pretty stable except camera ( no 1080p ) well I'll go with that for a while than maybe install above rom and hopefully v6supercharger
I installed Hellfire cm7 GB 2.3.7. with v6 supercharger. All fine but screen sensitivity is really low.
0b095 said:
I installed Hellfire cm7 GB 2.3.7. with v6 supercharger. All fine but screen sensitivity is really low.
Click to expand...
Click to collapse
Might be something to do with v6. Im not running it and everything is fine for me.
Sent from my hellpowered G2X
I'm using CM7.2 stable with Wolfscript and Harsh kernel and my phone is flying! Very stable and very fast (after Wolf script), though battery life has taken a hit after running the script. My next flash will be Mazout360's dual-boot CM10.1 unofficial with a GB ROM as my daily (still haven't decided which - they're all so good! )
Sent from my LG-P999 using xda app-developers app