Related
Afters 2 monthes on windows 6.1 and 6.5 , i finallly came back to the excellent android, windows is so boring
I had give up because of bad development cycle with .32 kernel and a lack of news on polaris android forum and the abandon of martin
So I downloaded atools, compiled the last .32 kernel and installed
HTML:
Thoughtlesskyle's Not So Super Froyo [RLS18] [12/4/2010] Who Invited This Guy!
both on nand and of course the last but not least update.tgz for polaris
The first impression was very very good : everything was well sized, smart and faster than fast, wifi and bluetooth did work
After my first installation, i went to the market and i did a mass update of stock application : that was my first mistake (maybe because of odexed stuff... i 've never understood this that's a shame) - everything went corrupted after this point until a big crash of the phone
So i did a second attempt and after two days with this configuration, i've a very good feeling, good stability and not so bad battery life after having installed "Data on demand" from the market
The most important point has ever be the battery life for me (not this fuc$''(ng camera - kids !!) and i've noticed that sleeping state is very odd for month, sometime the phone is entering sleeping state, sometime not and this must be battery hungry
my radio is 1.45.xx.xx
Some credits : i want to thank all the historical from HTC and the upcoming Liquid who do so much hard work replacing marginz if i've all understood
I wish i had the skill to help the community but i know my limit, everything that i can advise you is to work on battery life
Liquid : what is the problem with battery life exactly ? is there a way to work on sleeping state ? on windows my phone could handle 4 or 5 days without recharging... i know this have been asked so many times
I agree with you...
Hi,
Yes, I totally agree with you. I tried the first versions of cyanogene and after versions of thoughtlesskyle (fat froyo).
I admit that this is the most stable version ever tested.
Many thanks also to all those who have advanced Android for us.
I use my phone for business reasons but I always want to test the latest versions but there, I stop for the version of thoughtlesskyle as it works perfectly.
Thanks to all Polaris users
Cheers.
My phone is also running on Thoughtlesskyle's Not So Super Froyo [RLS18], and so far it is the best release I've ever tried.
Big thanks to l1q1d, who helped me with to switch from WM6.5 to Android. Tools and threads are always updated and support is both fast and relevant.
Thank you guys.
The problem with battery is due to several fatctors:
Radio firmware is not designed for android so it doesn't handle connection correctly
The sleep mode is not handle correctly by the firmware so the sleep mode is only a low consumpition mode
The battery calculation alghoritm is not perfect and there is no information on windows alghoritmation
good explanation liquid
Do you think there's a chance for you or another to ameliorate the situation ?
... and gingerbread is coming
http://sourceforge.net/projects/androidhtc/develop
what can we excpect from this ???
A new dream And a new phone again...
My wife have a Samsung Galaxy S and I like to have a better version of Android in my phone... Good but not as fast I want
chourmovs said:
what can we excpect from this ???
Click to expand...
Click to collapse
Did someone try gingerbread on polaris ?
I'm a little bit anxious about performance on our devoted device
I'm now trying Thoughtlesskyle's with data on sd, i have read that it can improve sd card bug and data loss on reboot; The fact is that i'm not convinced by system speed with such an installation
I'm not really sure system is well installed since i've read that you need a special rom to install on fat32/etx2/ext2
we can find everything and it's contrary on xda forum, that's annoyin and androidon htc site need to be improved
First experience yesterday :
- easy to install but I use with Haret
- fast and like the Nexus S... Hum...
- But a lot of problems : wifi ok but impossible to connect by authentication, impossible to access to date/time parameters, ... And when I reboot, impossible to get Android ! Just a lot of messages and that's all I've to reinstall again...)
I think we have to wait for a new kernel with this new build
I return to my Froyo by thoughtlesskyle
Cheers.
chourmovs said:
Did someone try gingerbread on polaris ?
I'm a little bit anxious about performance on our devoted device
I'm now trying Thoughtlesskyle's with data on sd, i have read that it can improve sd card bug and data loss on reboot; The fact is that i'm not convinced by system speed with such an installation
I'm not really sure system is well installed since i've read that you need a special rom to install on fat32/etx2/ext2
we can find everything and it's contrary on xda forum, that's annoyin and androidon htc site need to be improved
Click to expand...
Click to collapse
manu33xtro said:
First experience yesterday :
- easy to install but I use with Haret
- fast and like the Nexus S... Hum...
- But a lot of problems : wifi ok but impossible to connect by authentication, impossible to access to date/time parameters, ... And when I reboot, impossible to get Android ! Just a lot of messages and that's all I've to reinstall again...)
I think we have to wait for a new kernel with this new build
Cheers.
Click to expand...
Click to collapse
Great to read this
I'll give it a try during my holidays
Pass a good end of year
I'll try this HERE from Vogue forum... Maybe better than DZO build
Have a good holidays and happy new year
chourmovs said:
Great to read this
I'll give it a try during my holidays
Pass a good end of year
Click to expand...
Click to collapse
I going mad with my Touch Cruise. I just crashed it on the wall and I'm quite surprise it is still working...
I am experiencing lots of issues. It's so slow that the phone freezes from time to time. Even after rebooting, applications are crashing... because Android says that the SD card is missing (I moved most of the apps using app2sd).
I feel desperate because Android seemed to be a great OS, but not on a Touch Cruise.
I will try to chillout, and wait for new kernel releases and setups...
Julien1926 said:
I going mad with my Touch Cruise. I just crashed it on the wall and I'm quite surprise it is still working...
I am experiencing lots of issues. It's so slow that the phone freezes from time to time. Even after rebooting, applications are crashing... because Android says that the SD card is missing (I moved most of the apps using app2sd).
I feel desperate because Android seemed to be a great OS, but not on a Touch Cruise.
I will try to chillout, and wait for new kernel releases and setups...
Click to expand...
Click to collapse
you don't have to wait but just follow this
http://forum.xda-developers.com/showpost.php?p=10137836&postcount=115
this setup is amazing and very stable, none can't beat it for the moment
The app2sd technique is maybe at the origine of your problems, try with update3 and tell us if it's work
Thanks, I'll give it a go.
My telephone is also running on Thoughtlesskyle's Not So Super Froyo [RLS18]
I'll let you know if it works better (hope so!).
Hi everybody, I want to share what I 'm experiencing since last week. I made a BSE ( EDIT: using 1.0.6 atool ) flagging advanced mode then install system, fix permissions and clear dalvik cache and location system auto as well as data. In nbh editor I setted last L1q1d .32 fstab on auto. I have installed not so super rls 18...
Now in andboot I have a system.img and a data.img and here is my result : I have never had a reboot, no data loss and also I can turn off the phone without problem on reboot. I only must wait about 2/3 minutes before all is ready.
maybe L1q1d can explain what I have done?
I have a mirco sd class 6
P&L
It's quite interesting.
The answer is: you install both system and data on file on sd, the sd is quite fast so you can use it.
Does the camera work in this configuration?
abengoa said:
Does the camera work in this configuration?
Click to expand...
Click to collapse
camera will work with 2.6.25 stable kernel
So I got the Nexus S, i9023, after spending a good amount of time trying to figure how to do the Root, CWR, ROM, I still can't get things to work properly.
My main issues with the Nexus are the camera while recording cause it sucks!, the media playback controls on the lock screen and the speed of the unit in general, I mean N4G.com feels as if the phone was using a browser from the middle ages!!!!
I've been going around the forums but is kinda hard to read along threads of 100 pages of posts, not a guide with straight answers, just for the steps I have managed to accomplish I had to use Youtube, Google and another 4 pages + these forums to make sense of what's first and then go on "trial & error" cause some of the steps have updates on different pages that others don't even mention.
So, I was able to Root, CWR and then install CM7, then I reverted to stock cause the Market is gone.....lovely....but is even better afterwards.....
So the phone works on the stock Android again, but now I can't make the phone to boot on recovery again so I can use the CWM options, I can't make RM to install or run anything, the phone will simply does nothing...and if I try on flashing the Clockworkmod recov then I get a "an error occurred while attempting to run privileged commands!"........and I have SU installed.........
Btw, how do I install a kernel??? or flash the camera (if that's possible)....
Thx to any kind soul who could share it's own experience....
I recommend you do more reading and research before you flash anything. Cm7 does not come with market for legal reasons, you have to flash it separately. To flash a kernel you just download and flash it in recovery.
Sent from my Nexus S using XDA App
In your current situation you need to use fastboot to reflash recovery and use recovery to reflash superuser.
Sent from my Nexus S using XDA App
there is a one click root option which i keep on my desktop. way more than one click but i it does everything pretty much for u. try doing that.
Ns4g.com is bad because they have terribly coded flash content.
Sent from my Nexus S 4G using xda premium
Hello all, thx for the replies, N4G can't be that bad since the issue repeats itself at other pages like cnn, espn or even worst if u try eltiempo.com (newspaper from Colombia), the last one lags horrible on pc using FF and doesn't even load as full page on the Nexus or my N8, that page is so badly designed that even the mobile version sucks (problem is the news back home are kinda best shown there....).
In any case, as I said before, "Trial & Error", I already have installed CM7, Liquid SR, Miui and Oxygen, loved Oxygen, kept Miui, Liquid is a nice idea but needs work and CM7 is a bit rough.
So far I've learned how to restore from an image of a previous ROM (kept my original backed up in case!!!), also how to reinstall SU in case I have to go back to stock, how to install a new kernel (thx to Google and not the Search in the forums!!!), I did also overclocked my NS to 1.2G and seems pretty stable.
Things I still don't like and will look in the future to solve are the issues with the camera, Miui fixes part of the issues with lag while recording, I got a snag during a test recording made today, also the controls are not that amazing for the camera, no Zoom???, and the Gallery is not a plain gallery but mainly a file browser which makes it confusing if u forget what folder ur supposed to check...
Also the issue with the battery not hitting 100%...kinda silly....
In all it's been good but the time spent is a pain, mainly cause there is no explanation about how to apply the files, what order, etc, is nice to find things here in XDA but is rather annoying to have to use Google to find things around...
Thx again for the replies!!!
I just wanna share my experience of using the Android Revolution HD™ 6.0.2...
so far so good although at first when i flash the rom i was stuck at the bootloader because i thought the firmware can be flashed but it turn out that when you had already flash the rom you will have to go to hboot screen to update the firmware package but all in all i am very statisfied with this rom....
things that i liked-
-battery performance lasted a couple more hours longer... maybe because i flash the radio as well but i did see a little bit of difference..
-faster startup
-very user friendly interface
-so far after 5 days my phone had never crash even once
things that i dont like-
-i cant seem to open premium navigation for in htc locations after validating my licences... it always says htc location is stopping....
however i can use google location.... so for me this is good enough but if anyone has any solution do share it with me.... thx
Any random reboots or shutdowns?
Sent from my MIUI.us Sensation 4G using XDA App
Nice to know there are people satisfied as well. I see lots of trouble around, mostly with the new firmware/hboot.
I'll wait for the stable version though.
so far no random reboots or shutdown... yea people are having trouble with new firmware but once you start using ics its totally worth it your long hours of reading...
How easy for the firmware update? Did you have to change that text file within a zip?
the firmware update when i downloaded it was already in zip format... so i just place it in my sd card... so when you enter hboot screen it will automatically update...
Just had a random reboot using camera.
Gallery is very buggy as well as ringtones
hmm... did not occur in my sensation... probably u should try superswipe again... update firmware again... and flash boot...N try updating the radio as well.... gd luck... so far so good for me.. on my sixth day and rocking..
annukman said:
things that i dont like-
-i cant seem to open premium navigation for in htc locations after validating my licences... it always says htc location is stopping....
Q 2: My Premium Navigation doesn't work correctly. What should I do?
A: Your Premium Navigation may not work correctly for many reasons. Most of them are not ROM related. You can try the following things:
- reinstall your Locations under "Settings" ---> "Locations"
- remove /sdcard/.data/navigator/Data/Temporary from your SD card
- re-download Google Maps from the Android Market
- clear data from Google Maps in system software management
Click to expand...
Click to collapse
I'm actually really tempted to switch from 3.6.x to the ICS version. But I think I can wait a bit longer. Read in another thread that HTC's going to release their ICS in a couple of weeks.
Been using ARHD for a couple of months now and overall I am happy but now I am thinking of making the move to the ICS version of the rom and was wandering what the main benefits/difference are
With Sense? Sense is pretty much senseless with all the functionality of ICS. ICS core is about 120 MB and the sense ROMS are close to 400MB imagine how much faster your phone would run without Sense. Also any issues with contact merge?
Luv'n ICS and I'm on Virtuous 2.0.1 Senseless!
what you mean by "remove /sdcard/.data/navigator/Data/Temporary from your SD card".... should i delete this folder (temporary folder in data)...
"re-download Google Maps from the Android Market" i have search in android market there is no google maps app in there.... in the market it only has only "a google map navigation book"....
N wat do you mean by "clear data from Google Maps in system software management".... sorry i am not that clever.... thx in advance
I have the same problem too...
Still can not figure how to solve this....
Maybe i just go back to ARHD 3.6.12 until the ICS more stable...
Been using ARHD 6.0.2 for the whole weekend, and i must say that i'm loving it, just had one FC on whatsapp, other thant that is great. I have been all day long updating my spotify playlist in wifi and still remains more than 15% of the battery. Great job with the rom
pah1978 said:
Been using ARHD 6.0.2 for the whole weekend, and i must say that i'm loving it, just had one FC on whatsapp, other thant that is great. I have been all day long updating my spotify playlist in wifi and still remains more than 15% of the battery. Great job with the rom
Click to expand...
Click to collapse
I've had some occasional crashes and restarts, but otherwise I love it. Looking forward to the next release, and more importantly the next HTC leak.
pah1978 said:
Been using ARHD 6.0.2 for the whole weekend, and i must say that i'm loving it, just had one FC on whatsapp, other thant that is great. I have been all day long updating my spotify playlist in wifi and still remains more than 15% of the battery. Great job with the rom
Click to expand...
Click to collapse
I quote myself because i found something annoying, not serious, but was wondering if someone else had noticed it. It affects the power button, sometimes it does not work, i mean, if the phone is swithced off, when i press the button, nothing happens if i don't remove the battery and place it again. It also happens trying to wake the phone.
Maybe it has something to do with the Fastboot option?
Thanks again
i still havent manage to get my premium navigation to work... htc location map is working fine... what i mean is that if i open the normal htc map using the location it can open but when i change to driving mode it crashes... anyway manage to get papago to work for me after tweaking and playing with the resolution settings and the app called spare parts... anyway if anyone find any more solutions regarding htc location fix do tell me.. have tried tons of ways but still it keeps on crashing... amazingly the other features of my phone is working superbly fine... not even a single crash for more than one week... only once i have to reboot my phone when it could not connect to wifi after 3-4 days.... Not perfect but way better than gingerbread...
Hey, new to these forums and new to rooting. I got my sidekick about a month ago (always loved em) and was dissapointed by all the bloatware it came with and how it likes to lag and freeze up quite often.
I didn't want to get a new phone as I figured with a root and new ROM all could be saved.
Well I rooted it myself (using SuperOneClick) a few days ago. Installed superuser, titanuim backup, and rom manager.
Used titanium backup right away to make a copy of full factory system, then got rid of what bloatware I felt safe getting rid of and made another backup.
Now I wana look at flashing a new rom but aren't too sure how to go about it?
Read a few things here and there and aren't 100% sure, id say I'm around 75-80% on how to do it.
A lot of places say I need Nandroid for backup, true? Or can I stick with Titanium and go on?
Next, I can't seem to find many good roms w/ detailed info about installing it and about the rom istelf. Id like to know wat it comes with, wat it doesn't, wat ill need to make it work right and some images to see how it changes the appearance and any performance boosts.
Maybe I'm not looking in the right places or searching the right things.
So what I'm asking is if anyone knows a good rom (ik eveyone has opinions so ill look into all) and how to go about installing the rom and pros/cons of each.
Thanks so much for any and all help guys!
Also if someone thts gotten rid of bloatware on the SK4G, what did you get rid of? I dnt wana take off anything ill need or important.
Again thanks!
I've also been having problems with the phone turning off if the screen is off after a while and sometimes when I turn it on it says something like 'new sidekick tune a few things to get started' and takes about a good 5-10 min before its even useable.
The problem started before the root and as another reason I rooted hoping to fix the problem with some tweaking or flashing a new ROM.
Anyone heard of this problem before or have advice about it?
So I've been looking at the Glorious Overdose V2 and V5. Which have less problems/bugs?
I can't seem to find a definitive answer. Features seem to be similiar.
Some say that on V5 they score lower quadrants but seems to be faster but on V2 ppl are saying battery life and performance are both bumped big and V2 sees to has a battery % mod.
Which of the 2 are better? Or is there anything out there better than either?
Most of the devs include installation instructions with their ROMs, which are usually pretty easy to follow. Just make sure you follow the ones for the recovery you have (orange or red). If you haven't flashed the voodoo kernel, you're probably on the orange recovery. Once you flash a new ROM, you'll get rid of most of the T-Mo bloat. Personally, all my stuff is backed up with Google, Evernote, etc., so I don't worry about making Titanium or nandroid backups. I've tried a few different ROMs, and here are my thoughts:
GOV33+LEAN-PERFORMANCE-RELEASE - Started out good, but over time SU stopped working, battery life degraded. Liked LauncherPro. Maybe it just needs to be reinstalled
neXus_JB_v1.2 - Colors hard to read (white on gray). Seems like too many unnecessary apps (live wallpapers, etc).
MeMoRy - Based on GOV3.3 Lean. Uses Lightning Launcher, which I didn't like at first, but it's very simple and presumably lightweight. However, the supplied Jelly Bean keyboard keeps crashing. I installed the ICS keyboard and removed the JB keyboard, and this is now the ROM I use. You can find it here: http://forum.xda-developers.com/showthread.php?t=1837071
Your phone shouldn't turn off just because your screen is off for a while. Are you sure you have a good battery? Your phone will go dead if the batter is dead. If you get the "tune up" screen again, just go through the settings and you shouldn't get it again until you flash a new ROM.
Battery is good, holds a charge all day with moderate use.
When I do get the tune screen, I unlock it, and everything is fine and normal.
Ill start looking for more ROMs and info on them.
And the orange/red thing confuses me. How do I know what I am?
Okay to root is simple to flash a ROM you first need a "recovery" and a "update" file which is located either in sticky on the development page or you can find my thread which has basics you may need
Aldo have the ROM you want on the sk put in downloads on sd
Move recovery to system/bin
Move update to SD card but not in any folders
Now reboot into recovery
Reinstall packages
Now the menu will be yellow
Backup using nan droid if you don't wanna lose a lot of stuff
Now you need to wipe everything on main page an then in advance page if
go to mounts mount all except data I believe (I posted guide a few time but no longer use phone)
install zip from SD card now wait 10 mins an listen to device should say everything is mounted
Now you have a flashed ROM
Now from this point if you want to use a new ROM you
Hold power button go to recovery should now be red
Backup just invade you like the last one but wanna see the new ROM
Check mounts (should be fine but better safe then sorry)
Now wipe everything from main page and advance page
Now install new zip
Going back from one ROM to another
Recovery > restore > "file" done
Sorry I have been on sg3 forums a lot now don't use SK at all anymore either
But before I left I preferred ricandroid nexus roms most up to date I believe
All guides should be find able in other fourms as I post it a lot to help people
Sent from my SGH-T999 using xda app-developers app
Well things have been going good on the sk4g for a while. Didn't flash a rom as I feel uncapable so I left it rooted and only removed 4 apps tht I seen as bloatware tht I don't use. (Removed right after root in the very beginning).
Well the other day I went to update an app I got recently after rooting (theCHIVE) and it'll download and start installing but I get a red/orange warning triangle in to notification bar saying packing file not signed correctly?
I don't unerstand why its doing this?
Tried it on my normal 4g connection an on wifi as well, same problem. Any help guys?
Your issue is the apk the person didn't sign it correctly or the update took out 2.1 an went to newer firmwares.
If anything back up with titanium just that app you are updating. And then delete the app an install the new one. You then can go back to titanium an restore data
Sent from my SGH-T999 using xda app-developers app
I tried that and I got the same message, ill try emailing the dev and see what the problem could be?
Q&A for [p6800](18/Nov/2014)CyanogenMod 12.0 (Android 5.0) experimental
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [p6800](18/Nov/2014)CyanogenMod 12.0 (Android 5.0) experimental. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Hey Daniel, any solution to fix 3g on p6800 lollipop? Thanks
---------- Post added at 07:55 AM ---------- Previous post was at 07:19 AM ----------
Hey,Daniel,any solution to fix 3g on p6800 lollipop?Thanks
I need 10post to be able to post in Development board
Looking for fawrd to this build,
need at least mobile data, i will try it out...
had been follow since 4.3 till now..
Dear Daniel
Thanks for your developments. Will try it and revert for any comments.
Anthony
Daniel
Why cannot play youtube video in the apps. just only black blank screen, can you please to fix it?
Thanks for your great work
Anthony
HAPPYFATHER said:
Daniel
Why cannot play youtube video in the apps. just only black blank screen, can you please to fix it?
Thanks for your great work
Anthony
Click to expand...
Click to collapse
As far as know it a known problem in cm at the moment it has to do with the hw decoders.
Sent from my Xperia Z1
Method to achieve root
Got ideas how to achieve root? KitKat method or any specified methods?
Amazing work, Daniel. Thanks so much for your effort.
My impressions on this release: battery life is AMAZING, a lot better than official firmware; I am unable to play any kind of video, Youtube included, that´s the only thing that is really bothering me since I use chromecast to watch movies from it; Incredibly fast and responsive; some screen tearing when browsing the web (using Chrome); I don´t know if it is just my imagination but the color scheme seems to be a little "off", contrast is a bit down; some reboots here and there, it doesn´t seem to have a specific reason.
Well, that´s it. Thanks again for all your work!
cm 12
Its super awesome we are seeing lollipop on gt6810 all though there were some fixes need for video decoding and others. I did try it out but all the roms I've tried don't quiet give me the simple stable experience paranoid 3.68 gives me especially with camera flash everytime its opened for new pictures to be taken and browser distortions which is hardly experienced in pa3.68. Looking at the paranoid rom, do you think lollipop could use abit of the old experince of paranoid just incase the new updates coming out of lollipop pose abit too much of difficulty?... I really would love to see this awesome lollipop interface you've given us a chance to experience on a paranoid kind of feel...u know... Also, compared to how light paranoid is, the kitkat and others seem to perform under alot of pressure. My tab practically gets really warm when watching a video on low screen light and a minimized volume. These things are scaring the crap out of me so I've reverted back to paranoid. Would love to have a positive feedback, hopefully... Once again, Thank you for the work you've done so far.. You're aweSome!
---------- Post added at 05:38 PM ---------- Previous post was at 05:32 PM ----------
My laptop got stolen recently.. Really wanted to tinker with this new build. now I have to do that directly from my tab somehow...really depressing and stressful but all goes well, hoping for a better future with cm 12.. :cyclops:
I Need Multi-User Support
Thank you Daniel. I love it!
I hope that the multi-user support will be added in the next build. Your efforts are greatly appreciated.
Happy New Year!
test results for 5/1
very usable but not too stable,random crashes,auto restart,freezing
apps start fast but then lag a little
over all almost can be used as daily drive other than lag and random random crash and reboot
miss xposed and themes engine,lollipop has an annoying green-white theme ,yuck
Some issues with 10th Jan build
Hey Daniel,
Firstly, thanks a ton for your hard work. I check this forum on daily basis to check out new builds if any. I really love your work. I am still using my 3 year old tab just because of you.
I have installed the the 10th Jan build. There is one major issue I want to report. When I leave the tablet on for sometime untouched on charging or anything. I come back and try to use it at the moment the screen never switches on. I have to push the power button and hard restart the device again.
It seems to be dying out after going into deep sleep and need to be restarted to start using again.
If I am missing some solution for this please let me know so i can fix this. Otherwise this new build and new kernel is awesome. Even the speed of device has tremendously improved.
Ravi
reboot into recovery
hi
I installed this cyanogen rom on my P6800 , but in "Rom Manager" app i couldn't Reboot to Recovery.
when i press "Reboot to Recovery" my tab doesn't reboot!!!!!!!
Great Rom
This ROM is by far better than kitkat on many ways...and its much more stable... So far everything works perfectly...the only small thing is, I think lollipop is abit too heavy on the tab 7.7. Cm 12, I'm really enjoying the feel... Thanks Dan.
So how can lollipop feel lighter but with the same features? In terms of its memory management, speed at which it can process one or more things at a time and considering where tab 7.7 is coming from, it doesn't seem all that simple...
Also, you we could tell you if there were any problems.. No distortion or anything but there are minor flickers which kinda scares me..I hope its nothing. The flashlight function don't work. Any gapps higher than the micro version, I get this error "insufficient internal storage-aborting installation'. I use the latest TWRP.
Is it possible to get a camera app with photosphere? I really love that function in a camera..
Everything else works just fine...WiFi works better on da kk versions and much better on da lollipop (cm12). Like I said from the beginning, seems the lollipop weighs the tabs overall performance down a lot.. I couldn't find anything in the root folder that helped so maybe you could teach me a thing or two about that area on android lollipop...
I have a tab gtp6810
Thanks
And o, the previous ROMs that some people complained about the charging running down the battery instead while plugged in and running at least one app like the browser... I did a power supply reset in the terminal... I don't know if worked but I'll give a feedback here if I see any improvements for everyone using any of Dan HK ROMs...
fifth try
Well, I only installed the cm12 without gapp.. I'm going to fix in the apps I want from the gapp... So far, running abit smoother than with gapp install along cm12 together... For the torch, I'm going to take the one from cm11 and try make it a system app.. Also, the camera...the flash only works when every time you open anew and take the first picture or select through the flash settings.. Just like all the previous ROMs from carbon to slimkat... Only PAC and paranoid 4.2.2 are the last that works the way you would want..but graphical interface ain't as good as this..hehe
---------- Post added at 09:10 PM ---------- Previous post was at 08:57 PM ----------
The dalvik heap size allocations...do they work through the system's available storage, ram or some separate caches space separated? I sort of change those area abut..there was abit of change around the graphic performance and processor...couldn't really tell but it felt abit different... Will those sort of changes affect anything negatively as well somewhere in the custom firmware? I want to be careful I'm not doing anything wrong...
runs good
I think it run better without gapp....only difference is, you won't have all the Google service interface eating away your battery and stuffs power related.. Also, recent app button, the apps take abit more time for the close sign to appear... Its basic issues still remain like the missing torch function But in all, it works very good.. U think this new cm 12 could actually become an OS on it own? I've been going round the web seeing as how Aroma installer are popularly used with different cool installer interfaces... Cm12 so far ROCKS!
For those having battery charging problems, get the stock recovery (it worked for me) and flash in the pit file for ur device as well, seems to help somehow...you can try sbl bin but I mean, its just an idea... I lost my laptop so I can't manage going back and forth from friends houses all the time...
few cm12
Bluetooth..pair and connects with some av control. Didn't realize the tab was my PC now. Sending files..-"no bluetooth device found" (while paired or with the extra a/v connection).
Tab turned off, trying to charge under twrp 2.8.2.1, "battery draw jpg cannot load" or sth like that. Not sure what that means but a white one shows charging after the error.
Mobile Odin can't see nor access external SD.
On first install, Google search appears after turning off in launcher settings, open recent apps tab (show up here insteadv big and white), go back and turn on in setting,"heeeyyy, you're here!! Welcome back to my screen..lol".. So its not ICS version I see on the home screen.
Live paper on, turned on Bluetooth first time and device restarts. Surfing over 5 tabs on browser at the same time, restarts. Also, using an app like torrent to download one file while watching a movie (tab get very warm & freezes completely and unresponsive till I keep on power button till it restarts the device)
But I'm only testing all this with a fresh installation and gapp 5 beta 12 nano. I haven't changed any settings at all. Just want to help out with more feedbacks on overall performance.
Most responses to apps opening and closing can be slow in moments where about at least three or four apps have been opened.. So I have to manage an app at a time while clearing my recent apps. And surface a page or two unless with a different browser like UC browser, its okay.
Colors, everything feels cool. Flashed lollipop font and system sounds (don't remember where I got them but I'm sure it was on xda). It sort of felt like I was using the kitkat version that's why I changed them. Runs and feels abit better than my first time install cm12.
I don't know if there are any memory forced to leak but maybe you could hover around to see if something's is abit off about it from what I've said so far.
So between recovery and custom ROM, seems there's some unstable thing going on from within their interactions... I don't know, maybe recovery also needs an update....I guess...?... Well, you're the expert so these are my user experiences so far... Will let you know if anything else comes up
This new lollipop really is different. I can't even tell in the lib files are supposed to be in the apps or lib folder or both when trying out an app like the latest Google camera. I've tried but I only get as far as paranoma and it stops working at photosphere. Sometimes it opens but da circle has no use when the pictures are supposed to be taken. Read from file to file, I must say...I have never been this lost in android...hahahahaha
updating on cm12 issues that could help, hopefully
Lollipop looks light but feels heavy on performance i think cos of how much memory it over-uses.. Maybe its the kernels or sth so I'll wait for what Daniel will help us with to understand more (thank you again Daniel. U're awesome!)
What I noticed today was, when the memories goes to its limits in usage is some areas I think, the tab glitches, slows down abit and restarts if anything else opens... I was only watching a movie series (homeland TV series) from my 32GB SD card, and downloading a ROM from media fire with all my apps closed but the system running. No other recent tabs were opened.. Before I continue, I limited the memory use so between 5mb to 256mb does seem enough unless u r da type that multitasks a lot more (but that should not the case, right?...weird tho). I did this cos when I increased it, with a bit extra apps (about 1 or 2 etrxa apps running), its kept either freezing badly or restarting. So I just had to test this to see if its me or this new OS is going to be hard to work with...
Secondly...I use MX player a lot... Sometimes hardware works but when switched to software decoding and back to hardware, suddenly hardware is not supported unless I close the current video or app itself and start again. But will still fail at hardware decoding and sometimes restarts unexpectedly during software decoding.. Too much info?...haha... Naaah.. Lol
JESUS! The cursor is abit difficult to move around with a huge finger that covers it completely...lol
In case you are wondering,"where did this guy come from"...I assure u, I have been a fan of xda for about a year or two maybe or more cos I remember using my first tab its been almost or over two years. I only recently joined cos android has fascinated me in many ways and by having alot of great customization options and being an open source if I may add... I'm happy old devices get to meet the challenges that people have doubts on.. I'm grateful that I still use some of my old devices with a lot of confidence...
---------- Post added at 01:57 PM ---------- Previous post was at 01:41 PM ----------
saeghe3000 said:
hi
I installed this cyanogen rom on my P6800 , but in "Rom Manager" app i couldn't Reboot to Recovery.
when i press "Reboot to Recovery" my tab doesn't reboot!!!!!!!
Click to expand...
Click to collapse
Really? How did you install it? And did you do a factory reset after install ROM or clearing cache and dalvik cache? Have u tried a long press on the power button to shutdown first?
As for ROM manager, I can't say for sure I can help u with that but I also noticed some things like mobile odin don't fully run all its functions on my tab p6810 with the p6800 kernal I found for mobile Odin to work o my tab.. I can't see the external SD unless i copy da file I want to use to the internal storage... So cm12 is still a working progress I guess.. Refer to the original cm12 post...Daniel said sth about the we probably will have to end up with our own new custom kernel to use I think due some out dated resources...For now, if no options works for u... If u know how to open the tab gently to take out the battery's connection and back in to enable u go into recovery to do a back up just in case... The u can sort out the ROM properly...and only if ur tab doesn't allow u to shut it down manually... At ur own risk..u can watch YouTube videos on how to handle ur tab p6800 with care when opening..
I've used twrp recovery and cwm recovery (which cwm needs to be rooted before flashing ROM), they all worked well for me so far.. A feww issues I've already pointed out but could be sorted eventually..
I searched da web for info and made a few changes to my build prop. Would share with u if interested...but remember, I'm only using the WiFi version of ur tab..
---------- Post added at 02:20 PM ---------- Previous post was at 01:57 PM ----------
I think the last cwm recovery works abit better (if in case u have charging charging issues and don't want to use the original stock recovery).. U flash that and root ur device through the recovery, restart recovery to root or fix root then install cm12 with mini or nano gapps 5.0. Battery draw is missing in ROM but don't worry, it will still charge.
I want to share my super su which I flashed to root the device but I can't get the upload button to pop up any window to find the file on my tab in the system's browser on the cm12. Well, all the same...Good luck!
I wonder if this is what they call a memory leak...
Three words...poor memory management... For an old device, lollipop settings over use tab hardware resources..though its performance is better in terms of gaming.
OK...I said I made a few changes to my build.prop...well, here they are:
#
ro.sf.lcd_density=180
ro.HOME_APP_ADJ=1
#
wifi.supplicant_scan_interval=84
dalvik.vm.heapstartsize=7m
dalvik.vm.heapgrowthlimit=49m
dalvik.vm.heapsize=294m
dalvik.vm.heaptargetutilization=0.72
dalvik.vm.heapminfree=788k
dalvik.vm.heapmaxfree=7m
dalvik.vm.lockprof.threshold=600
These are lines I made changes to (p6810)
******
I'm using nova launcher as system launcher
Flash some L fonts and sound I found on YouTube
And boot animation
Just to try get it to feel like lollipop as much as possible..
I notice a white line that flickers between long minutes like about 45mins during a movie playing on my MX player.. It also happens during charging the device when running twrp I guess...i see that on my lockscreen when on landscape mode...don't really know what that means...but I take out the charger for some time and plug it back and it stops for a long while but I switched to cwm.. Da MX player thing still shows though..
I removed that performance tweak app... Can't risk overheating...sorryyyy...I get scared a lot when I know my device hardware has its limits and way of coding to the responsiveness to whatever android versions out there....and I guess it all depends on the hardware make or build period and its sources..
Well, catch ya'll later... Still waiting for kernel and/or some ideas...
Cm file manager don't do much aside from viewing files and folder or install apps..
I tried material manager pro...that too crashes when I try to select everything at once in a folder...have no clue what that means either but will make time for the apps later.. Right now, cm12 needs a good workout till I feel its stable enough for extra updates from Daniel and others who enjoy helping g out....
PEACE!!
tasty lollipop
arrrghhhh! Wish I had an 'F5' button on my Google keyboard!!!
Just messing around..lol... But seriously though, you use it for abit with different apps running and closed...then remove all recent tabs...restart, you have most apps you opened which a lot are related to Google running as background processes......mmmmm....didn't realize the system takes me abit too seriously...Haha
So now, I have 'ccleaner' and 'the cleaner' installed. Ccleaner runs... 561.6mb ram of 770.97mb used. Okaaaay..........analyze....clean processes, empty folders, cache....no changes to memory.....awkward...lol..
Now, 'the cleaner' app- analyze, 197mb or sth to be recovered...nice! - 'clean'.......384.84mb in use...shows in ccleaner....wow!
This is.....sth......
Ok so, system bootup........Google+ and YouTube are background processes.... Sometimes 'music' pops up....weird....I.....don't think I'm ready to dance just yet... But after a while they get tired and leave, leaving YouTube behind.......maybe it wants me to watch xda videos....... Ok, so Google app pops up when I've l've literary stopped all its functions... I haven't force closed it, no no no...well....not yet but I will....
I once saw Google service and Google play service pop up...are they related?
Also, I would like to make guess or assumption; I think it takes abit longer to load everything compared to previous ROMs... Even when its already booted to home screen..
Ok, so some was last night's observations.. I think this gapp is going to make me saaad.
Will use only cm12 without gapp and run the Google apps manually instead to avoid multiple background processes at once...gms core.....interesting and can be quiet a strain...o well.....laterrrrrrr