So I received my Trident Aegis Case today and I love it. On the one hand it is bulkier than both the Cimo and Diztronic cases. It doesn't feel as grippy as the Cimo which is what I have been using.
On the other hand the phone feels like it could take a bigger hit. Also, the buttons are a lot easier to press than with a case or even without a case. The power button was a bit of a frustration for me but not so with this case. The cover also has covers for the ports.
To answer another question in another thread, you can attach a lanyard to this case, two little holes on the same side as the volume bar.
I will update when I use it some more to get my impressions for every day use. I took pictures.
It also comes with a screen protector, but I have not used it since I already had a different one on the phone.
Here's a link http://www.tridenteer.com/categories/HTC-ONE-S{47}HTC-VILLE/ It comes in black, blue, green, pink and red.
Just to chime in, I've been using this case for about a week and I can echo that the buttons are MUCH easier to press in this case. It was frustrated with the power button, especially with the D3O case from T-Mobile. This new case is like night and day.
Trident does a really good job of balancing silicone and hard shells so that the phone still has plenty of cushioning in case you drop it while not being too 'sticky' from the silicone. This is a welcome from the typical gel/silicone cases that get caught in your pockets.
I'm really quite gentle on my phones but having this same type of case on my last phone gave me plenty of confidence is not having to baby it. Tossing it around and dropping it doesn't make me even wince anymore. The One S case is no exception.
Love this case! I have the blue one also. Best color imo.
I managed to get a black Trident Aegis off ebay for my phone and so far i'm loving it. Works really well and it's alot easier for me to handle now. As a lefty, I always had issues with the power button but now since it's more prominent, I can reach it pretty quickly.
CephiroX said:
I managed to get a black Trident Aegis off ebay for my phone and so far i'm loving it. Works really well and it's alot easier for me to handle now. As a lefty, I always had issues with the power button but now since it's more prominent, I can reach it pretty quickly.
Click to expand...
Click to collapse
I received my green aegis awhile back. Love the color and feel of the case. Not bulky and as mentioned earlier, easy to push power and volume buttons easily. (Lefty also)
Only issue I have, and it may not be one, the corners, though covered with the silicone, seem like if I were to drop the phone on a corner, how much impact resistance will it absorb... Again, it may be enough for a normal 3-5 foot drop.. though not willing to test it out intentionally. :cyclops:
does anybody knows if there is a possibility to purchase one of the trident Aegis for my One S in Europe, especialy Germany?
would be very nice.
greetings,
H.
I want this , I have the black 1S so I would get the red one XD
Sent from my HTC VLE_U using xda premium
does this case lift the screen protector?
Kawaisa said:
does this case lift the screen protector?
Click to expand...
Click to collapse
Depends, it lifted mine a little bit on the bottom of the phone near the capacitive buttons so I just trimmed the next screen protector corners before placing it.
I think this has more to do with the curved glass screen than the screen protector.
I have not noticed this.
I got mine today !!
Sent from my HTC VLE_U using xda premium
carlos16119 said:
I got mine today !!
Sent from my HTC VLE_U using xda premium
Click to expand...
Click to collapse
How does it look? Can you post some pictures, I am thinking of getting the One S with that case.
im 14 and i dont know if i should get this case or the kraken version i like the kraken because becuase it has a big lift so the screen get scratched which do you think is better
Thanks for the pics, helped me decide to get this case
I want to get this case but at the same time I am very iffy do to the fact that it is sooo bulky, any advice for someone coming from a Diztronic?
personally I prefer no case at all.. besides, from my experience, ONE S is not a easily scratched phone...
putting a case of any sort destroys the original design, this is especially true with iPhone, one of the most beautiful design out there, but 95% covered in a case which then is no prettier then my uncovered ONE S.
just my taste tho
I currently have mine removed, the bulk wasn't really the issue but the silicone made it difficult to slide in and out of my pocket.
I got my case a couple days ago and I love it. its not too bulky imo, it give it more grip for me and I don't feel like im always going to drop it if I grab the phone wrong. I think the case looks great as well (I got the blue one).
Thought I read somewhere that the Trident Aegis case for the One S covers the notification light. Is that true?
CzarDestructo said:
It was frustrated with the power button, especially with the D3O case from T-Mobile.
Click to expand...
Click to collapse
You guys can just do what I do and put a dab of loctite gel inside the case where the button sections are. PROBLEM SOLVED!
I had the D30 and a little glue inside and the buttons became easier to press than without a case at all.
Cheers.
Related
Was looking at getting the otterbox commuter for my phone, but have a question for someone that has it. I tried the speck case and it had rubber buttons for the volume and unlock buttons. With that case you had to push exceptionally hard to get the button to push. I noticed the commuter case has these rubber buttons as well. Can someone with the commuter case tell me if the buttons are hard to push or not. What I am asking is does it take a lot of pressure to register the button push.
Thanks.
I have one on the way... I'll post my impressions when I get it tomorrow (I think).
The rubber on my otterboxes I have had were soft...it is a nice absorbing somewhat grippy rubber. I wouldn't see making the buttons harder to push then they already are.
I have one for my nexus one and I really like it. My brother just put in a order for the Inspire 4g and the commuter. The phone is shipping to my house because I have to set it up for him. I'll post some pictures when the phone arrives.
bigdessert said:
Can someone with the commuter case tell me if the buttons are hard to push or not. What I am asking is does it take a lot of pressure to register the button push.
Thanks.
Click to expand...
Click to collapse
On my Nexus One I have no problems with button input. Since I have a trackball I normally never use the power button. But when I do I don't notice any problems.
Keep us up to date. I was looking for cases for this phone and it sucks that nobody has any good ones (in my opinion).
For your Nexus One, does it attract a lot of dust etc? I've never used one, but I hear people saying its kinda siliconish and i've used silicone and silicone sucks for pocket use.
Mine was just delivered to my house about an hour ago. I was wondering about the rubber buttons as well, so I'll post how they perform once I get home.
Got the otterbox on now, and the button covers are not stiff at all. It just takes marginally more pressure than normal. The case fits well and does not add too much thickness to the phone. The port cover is a bit touchy to close, but that might just take getting used to.
Sent from my Inspire 4G using XDA app
IMO, the rubber casing improves the feel of the volume buttons. Before, it was slightly difficult to determine whether or not the button was pressed. Maybe it's just specific to the phone I got. Overall, I recommend the case but get a new screen protector.
jpounds7 said:
[...] The port cover is a bit touchy to close, but that might just take getting used to.
Click to expand...
Click to collapse
I agree with this; the port cover is a bit fiddly.
I had the commuter for just over a week now and its a great case. Makes pushing the buttons easier i think.
I upgraded to the Defender today and the only issue i find is that it seems it was made to lock in the case with the face of the phone out. When i flip the phone to have the screen inside, the power button rubber gets pushed in a bit. The rubber on the outside is very very soft but gives a good grip. Bottom port is easy to get at like the commuter. The backside has the screen protector over the camera lense and the flash. This does not affect pictures or video that i can see.
EDIT: to fix the power button rubber being pushed in i took a file and ground out a small amount and fits perfectly now
My Commuter arrived earlier today, and I love it.
The volume buttons are actually easier to push thanks to the case.. the power button is about the same. Build quality is top notch and it doesn't add nearly as much thickness to the phone as I expected.
But most of all, I like the way it feels in my hand. Naked and uncased, the Inspire feels too thin and unconfident. With the Otterbox, it feels just right. You might feel like it's a bit slippery at first, but you'll get used to it.
Ordered mine, The otterbox site has them in stock and listed under Inspire 4G now.
Had the commuter on my Captivate and loved it. Good protection, gave the phone a good feel in hand, and made the buttons easier to use as well. Also liked that the ports were covered up and protected. Have not got a case yet for my brand new Inspire, although my wife has the speck case on hers. Think I will personally get another Otterbox just because the buttons seem very stiff on the Speck case. Plus, trying to get the phone out of that case is kind of like getting the battery off of the Inspire for the first time.
Sent from my Desire HD using XDA App
Any commuter case owners care to comment on the included screen protector? Does it affect the sensitivity of the touch screen much? Any edges of the screen protector exposed? Or are they completely covered by the "lip" of the case on the front?
I still have the included protector on my Cappy along with the commuter case. No problems with the edges rolling up or peeling. For me, has been pretty darn durable and I've had it on send the end of november.
Sent from my Desire HD using XDA App
Just got mine. Fits great. Cant Complain at all.
Anyone mine taking some pics of theirs and posting it here for us to see? Thanks in advance.
If anyone is interested in picking one of these up, Otterbox has them back in stock. I also found the coupon code PSPNEagles04 which gives you 20% off and free shipping.
I just placed an order for one and 2 minutes after i check for my confirmation email and click on the link for the case again and it's on backorder. Crazy
3GOD said:
Any commuter case owners care to comment on the included screen protector? Does it affect the sensitivity of the touch screen much? Any edges of the screen protector exposed? Or are they completely covered by the "lip" of the case on the front?
Click to expand...
Click to collapse
Pretty good screen protector. Takes about a day for the initial resistance to wear off, and it's smooth sailing from there.
If you’ve ever been a customer of Seidio before, then you know and expect the quality and craftsmanship that they put into their products. It is my pleasure to write that the Active case and holster combo for the HTC Sensation 4G meets nothing less than these expectations, and offers the level of comfort, protection, and functionality that is desired. As with their past products, Seidio has continued to masterfully craft the Active case to allow for full access to all functionality ports (charging, audio, camera, speakerphone, and buttons) on your device, and have done so without adding unnecessary weight or bulk to the overall feel. Additionally, the case is comprised of Seidio’s traditional soft touch material that is held in place by a heavy duty plastic shell, which maximizes the overall protection of the device and offers an unparalleled shock resistance. The holster is also made of Seidio’s heavy duty plastic, which holds the protected device very snug and safe with the assistance of the high quality clip up top. If you’re in the market for a case that will provide maximum drop protection for your HTC Sensation 4G and feel smoother and more streamlined than anything else currently available, then you can’t go wrong with the Active case and holster combo.
All of Seidio’s products are available at http://www.seidioonline.com/
<Video review coming soon>
Looks nice! I like the look of it. Kinda reminds me of a toughbook lol. But I love the look of the combo when put together. I may get a blue one to change it up a bit .
Great review! How does it fit on your belt? I currently have a universal pouch. It works but looks too bulky IMO. Also how hard/easy is it to take off? In case of the dreaded battery pulls for us rom flasher-compulsive types . LOL
kpjimmy said:
Looks nice! I like the look of it. Kinda reminds me of a toughbook lol. But I love the look of the combo when put together. I may get a blue one to change it up a bit .
Great review! How does it fit on your belt? I currently have a universal pouch. It works but looks too bulky IMO. Also how hard/easy is it to take off? In case of the dreaded battery pulls for us rom flasher-compulsive types . LOL
Click to expand...
Click to collapse
It's great when applied to your belt. Very sturdy. I used a universal pouch before too, but this thing blows that out of the water. As far as taking it off, you can do so without even taking the shell off first. Just grab one corner and slide it back. Very easy, but putting it back on does require the soft touch case first then the shell. Doesn't take more than a few seconds though once you get the hang of it and the fit right.
Excellent review (pictures). Personally I love seidio and have used them on all my phones. Looking forward to getting this one.
Sent from my HTC Sensation 4G using XDA App
Thanks for the review.
I was contemplating on getting this one while waiting for Otterbox to release the Defender series on the Sensation.
Will probably get it and then the Otterbox one when it comes out to compare.
Got the same one and I love it. Good thing I have a holster cause the rubber parts is a lint magnet but wipes off easily. I love this case!
tabuburn said:
Thanks for the review.
I was contemplating on getting this one while waiting for Otterbox to release the Defender series on the Sensation.
Will probably get it and then the Otterbox one when it comes out to compare.
Click to expand...
Click to collapse
Are they coming out with a defender, pare? I thought just a commuter case, I'm not sure though.
*want* *checks pockets, finds lint* *cry*
I just bought this and since theres no "plastic finger" holding the silicone down on the top by the power button you cant put it back in the holster with one hand. The silicone bunches up so you need to use one hand to hold the clip open and one to put the phone in the holster. I still think its a nice setup but wish there was an extra finger on the top.
Nice review...Seidio has always been a fav!
chadsin said:
I just bought this and since theres no "plastic finger" holding the silicone down on the top by the power button you cant put it back in the holster with one hand. The silicone bunches up so you need to use one hand to hold the clip open and one to put the phone in the holster. I still think its a nice setup but wish there was an extra finger on the top.
Click to expand...
Click to collapse
After using it for a day or two it gets easy to do it all with one hand. Pull the clip up with your little fingers and push the phone in with your index and middle.
Sent from my HTC Sensation 4G using XDA Premium App
Lakeshow423 said:
Are they coming out with a defender, pare? I thought just a commuter case, I'm not sure though.
Click to expand...
Click to collapse
I can't confirm that they will but the Sensation is new so I'd guess a couple more months and they will probably come out with one.
Sent from my HTC Sensation Z710e using XDA Premium App
Great review, Does it add a lot of thickness to the phone compared to a TPU case?
Ended up ordering this case from ebay because of your review. Also because my brother has had the Active X version on his iPhone 4. He has dropped it more times than he can remember. The case has chipped where it hit and the Zagg was scratched but the iPhone is in pristine condition.
I am extremely pleased with case, Feels great, Sturdy and I feel like it could actually survive a drop now. The only thing I don't like too much is the silicone jacket attracts lint and dust a bit but it doesn't stick to it and I can brush it off or blow it off quite easily. So if you're looking for a case that will protect your investment you won't go wrong here. Doesn't add much bulk to the sleek Sensation 4G.
Overall a great case, With superior protection.
I have this combo as well except in blue. It is very nice but I must agree with the post about wishing it had a hard plastic section on the top front of the case to make it easier to "pop" it into the holster. Can it still be done with one hand? Yes, but not as easily and this has already caused a couple of near drops due to it not clicking in just right.
Overall I'm very pleased but I've also ordered the Trident case to see if that one doesn't have this issue (hopefully it'll fit in my Seidio holster too).
I had one of these on my Droid X and i must say they hold up. took several skips across the concrete. no damage of any kind. think i need to order for my sensation too. cause i'm a auto tech and i always be around dangerous things. great review
madwolf27 said:
*want* *checks pockets, finds lint* *cry*
Click to expand...
Click to collapse
+1
I had one of these on my old Evo.The black soft cover is a huge lint/dirt magnet.I couldn't stand it,after about a week of use i threw it away.Frankly i loved everything else about this case,but the lint thing is a deal breaker for me.
i just ordered one off ebay, hopefully i like it. wanted it real bad actually, even though i pre-ordered an otter box case as well.
I bought my mom a SGS4G last week (her first smartphone,) and I've been searching EVERYWHERE for a TPU case for it. She just wants something simple, preferably clear or smoke colored, but every one I've found at a reasonable price has a pattern (diamonds, argyle, etc.) Even on eBay, the majority of the TPU cases have some sort of pattern, which is extremely frustrating. I don't understand why, because the SGS4G is a gorgeous device... you would think more cases would be designed that accentuate the design, but that's just not so.
Can anyone recommend a good TPU case that fits well and doesn't have a pattern in it? It doesn't need to be anything fancy, just as long as it fits properly and doesn't have a stupid pattern. A bundle with a screen protector would be nice, but not necessary.
Speaking of, can anyone recommend a good quality screen protector for the SGS4G?
Thanks in advance for any help, I've got a massive headache trying to sort through all the ugly cases.
Smoke TPU: http://www.amazon.com/Premium-Flexi...FU9C04UXZ9&s=wireless&qid=1319269336&sr=1-270
Black TPU: http://www.ebay.com/itm/ws/eBayISAPI.dll?ViewItem&item=250784405080&ssPageName=STRK:MEWNX:IT
I just ordered the smoke one last night. The image was different last night when I placed the order. I'm not sure why they keep changing the pictures like that. Weird.
You could also refer to this thread: http://forum.xda-developers.com/showthread.php?t=1040980
Thanks for the link, please post once yours arrives and let me know how it fits! I'll check out the other thread and see what I can find as well.
The guy who originally posted it said it fits great. I'm not too sure about buttons though. I'm really iffy about buttons for TPU cases, since they're usually very difficult to press. The smoke case looks really good though, because the buttons seem to be very distinct (two buttons for volume instead of the usual one).
I bought that same 'smoke' case from eBay. I guess its really iffy on if you get a good one. It isn't exactly a smoked case but more of a hybrid case. Its outer rim is black tpu and the back is a frosted polycarbonate material. There are 2 versions of this case though, the one wirh the covered buttons is the good version. everyone said it had a perfect fit and they absolutely loved it on the vibrant forums and then there's the one where there are cutouts for the buttons. That version, which I unluckily got, SUCKS. The fit was loose, the bezel wasn't fully covered and well eventually it broke . I hope you have a better experience than I did.
-edit-
I just remembered you were the one with the trident aegis. Lol why are looking for another case?
Sent from my SGH-T959V using XDA App
icy56 said:
I bought that same 'smoke' case from eBay. I guess its really iffy on if you get a good one. It isn't exactly a smoked case but more of a hybrid case. Its outer rim is black tpu and the back is a frosted polycarbonate material. There are 2 versions of this case though, the one wirh the covered buttons is the good version. everyone said it had a perfect fit and they absolutely loved it on the vibrant forums and then there's the one where there are cutouts for the buttons. That version, which I unluckily got, SUCKS. The fit was loose, the bezel wasn't fully covered and well eventually it broke . I hope you have a better experience than I did.
-edit-
I just remembered you were the one with the trident aegis. Lol why are looking for another case?
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
I love my Trident Aegis, but its look is getting bad. The matte finish on the plastic is coming off, which makes it look cheap. Kinda disappointing. I really liked the case too. I also snapped the bottom a bit when I was taking it off (although it still all stays well together).
That's very interesting how there would be such a huge difference between the cases. I hope I got a good one then. The one from DayDeal (the one I posted in this thread) looks pretty good. The buttons are protected, but it looks like it would be easier to press than the standard TPU cases.
EDIT:
I just want to note that the IMAGES are different for DayDeal and the other retailers. DayDeal actually has the image as http://ecx.images-amazon.com/images/I/3106XVVkf1L._SL500_AA300_.jpg and http://ecx.images-amazon.com/images/I/41k4wppV-9L._AA300_.jpg, while all the other retailers have an image like this: http://ecx.images-amazon.com/images/I/51PiNV1S4zL._SL500_AA300_.jpg.
That might be something important to keep in mind.
EDIT #2:
I think what you're talking about are these cases:
1) http://www.daydeal.com/product.php?productid=45703
2) http://www.daydeal.com/product.php?productid=50098
I'm betting the former is better than the latter.
icy56 said:
I bought that same 'smoke' case from eBay. I guess its really iffy on if you get a good one. It isn't exactly a smoked case but more of a hybrid case. Its outer rim is black tpu and the back is a frosted polycarbonate material. There are 2 versions of this case though, the one wirh the covered buttons is the good version. everyone said it had a perfect fit and they absolutely loved it on the vibrant forums and then there's the one where there are cutouts for the buttons. That version, which I unluckily got, SUCKS. The fit was loose, the bezel wasn't fully covered and well eventually it broke . I hope you have a better experience than I did.
-edit-
I just remembered you were the one with the trident aegis. Lol why are looking for another case?
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
The case that I got was the one with a black rim and transparent back cover. It feels really durable because of the polycarbonate back, but it makes taking it off a hassle.
With that said, I still love this case. It covers everything perfectly and it keeps the phone slim. The buttons are extremely easy to press as well.
bkoon1218 said:
The case that I got was the one with a black rim and transparent back cover. It feels really durable because of the polycarbonate back, but it makes taking it off a hassle.
With that said, I still love this case. It covers everything perfectly and it keeps the phone slim. The buttons are extremely easy to press as well.
Click to expand...
Click to collapse
Glad you like your case. So I assume yours had a covered sleep button and volume rocker? I have the same thing, just with a crappy fit and cut out buttons.
Sent from my SGH-T959V using XDA App
icy56 said:
Glad you like your case. So I assume yours had a covered sleep button and volume rocker? I have the same thing, just with a crappy fit and cut out buttons.
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
Yeah, mine were covered. I like that the buttons are separated too. I gotta press a bit harder than on my Trident Aegis case, but I guess this will do for now.
I'm looks for a case that fits nice and snugly on the mytouch 4g slide, that also doesn't scratch.
Both the cases ( Fishbone phone protective cover and the Trident Aegis for the mt4gs ) seem really awesome.
Which ones better? Are there any issues with them?
I need to decide!
I personally don't like the Fishbone at all, but I also haven't used the Trident Ageis yet, although it seem pretty cool.
I have fishbone's, they are little hard to push out the keyboard but you get use to them in a couple days...other then that the front never falls off and I guess that's a win for me...although I had trident's on my myTouch 4g (NOT SLIDE) and they were great but i've ever used them because of price.
I have the fishbone and did not like it that much. It looks nice but overall it affects functionality of the phone specially the buttons. It makes the volume buttons more exposed causing accidental volume adjustments over the course of a day and the front case is very tight that it cause minor scratch on the keyboard. I just used it for a week and stop using it.
Thanks for the advice. Probably gonna get the Trident case.
Sent from my myTouch_4G_Slide using xda premium
Micoman said:
I have the fishbone and did not like it that much. It looks nice but overall it affects functionality of the phone specially the buttons. It makes the volume buttons more exposed causing accidental volume adjustments over the course of a day and the front case is very tight that it cause minor scratch on the keyboard. I just used it for a week and stop using it.
Click to expand...
Click to collapse
THIS ^^
I kept having accidental power button presses while texting on the slide out keyboard as well.
Plus mine has this weird scent that gives me a massive headache.
Sent from my LG-P999
i am a Triden case user and fell satisfy with it, protects from every side... it makes kind of bulky but the protection is what i was looking for.... i came in many colours but i prefered in black god luck!
I like that the Trident case absorbs shock and has filters on it that block dust from getting into the speakers.
Count me as a happy customer, finding a case for the device was of primary concern for me, and the Trident is the closest thing i'll find to fitting the bill.
I don't like that the USB port is still exposed, but I suppose you can't win them all - it's literally my only complaint with the case.
Blue6IX said:
I like that the Trident case absorbs shock and has filters on it that block dust from getting into the speakers.
Count me as a happy customer, finding a case for the device was of primary concern for me, and the Trident is the closest thing i'll find to fitting the bill.
I don't like that the USB port is still exposed, but I suppose you can't win them all - it's literally my only complaint with the case.
Click to expand...
Click to collapse
Don't worry... It is also my complain also... And the where we plug the earphones... Can't have all I supposed...
Enviado desde mi myTouch_4G_Slide usando Tapatalk
Check out this website. They have the blue Trident case for only $14 plus $3 shipping. Make sure you use promo code (vip20) at checkout for 20% off. Mine came to just over $14.
htccraze said:
Check out this website. They have the blue Trident case for only $14 plus $3 shipping. Make sure you use promo code (vip20) at checkout for 20% off. Mine came to just over $14.
Click to expand...
Click to collapse
Good ass deal if only it was a more manly color lol... you can find the trident case on amazon for 21 dollars free shipping in all black aswell as every other color
Haha!! I completely agree with you on that. I was thinking since its a polycarbonate case I might be able to mod it by dyeing it with rit fabric dye and acetone. This should be able to give me a greater choice of colors which i may like over the few they have for this case.
As long as the dye doesnt rub off onto the phone lol
I just got the Trident case, it is awesome. I had one of those cheap rubberized snap on cases before, never really felt like my phone was protected. This one is definitely top of the line, plus it goes on and off really easy. Got it for 19.95 free shipping off ebay.
Sent from my myTouch_4G_Slide using XDA App
I wish they had a Otterbox Commuter for this phone ive always preferred them, then second trident.
@bmw2105
I've done this in the past, well not on cases but other polycarbonate plasics and it actually creates a solid permanent dye. It doesn't come off while wet or when cleaning it so i would feel safe to think it won't harm the phone. I would be using a full ZAGG invisibleSHIELD screen protector along with this (hopefully depending on fit) so i think i will be good to go.
Alright. So, impressions first.
I've used Seidio Active cases on all of my phones since my original Incredible (quite a few devices). I love them. It was a no-brainer to get one for my One X. I hadn't ever used one of the kickstand models, so this is a first for me.
First off, the case is great. Very well designed, feels really really good in the hand. It gives the physical buttons (power, volume) a better feeling, makes them easier to use. I know some people had issues with the power button being a little too recessed, so this should remedy the issue a little.
It looks great. I got the glossed white, and I have to say, if you got the white One X, this is definitely the way to go. Really accentuates the overall look of the device, matches nicely.
The case should definitely prevent a lot of damage from drops. The silicon layer allows you to put it down face first without it resting on the screen, and the hard shell gives it good protection on the edges and corners. It also lifts the phone off of the camera lens.
The kickstand. This is kind of meh, to be honest. It is advertised as a metal kickstand, but honestly it feels pretty flimsy. It does support the phone on its side, but you cannot set it up vertically (like you can with the Thunderbolt). I've honestly not used the kickstand much. I don't use my phone for watching stuff very often, and even less often do I need to rest it that way. It can't be charged while the kickstand is out since the charging port is covered.
Another gripe about the kickstand is that it puts a little bulge on the back of the case. You can't really tell on the site, but it juts out a little. Kind of awkward, kind of throws off the minimal look to it. Not a huge deal though. I did contact Seidio and they said they have no plans to develop the Active case without a kickstand for the One X. So it is what it is.
Overall, it is a great case. If you are looking for solid protection with minimal bulk, this is definitely for you. I was actually really surprised how thin the device stays with the case on. Thanks to the hard shell the case doesn't make it difficult to pocket, since the silicon layer isn't what contacts the inside of the pocket (if that is an issue for you).
I'd definitely say it is worth it. Some will love and use the kickstand probably, others will likely be indifferent. I could live without it. But you can't beat the look or the feel, or the peace of mind it brings. Recommended!
Pictures! Apologies for...the space sheets. And the various books on psychology. The general cleanliness of the background. Haha.
Okay, it won't let me upload them to here. Too big I guess. Idk. Here's a link to my public Dropbox folder with the pictures in it.
https://www.dropbox.com/sh/2mwqek85ez80rqn/OR8BfO1rlj
looks nice
tad thick for my taste but nice none the less
Hmm... I really like the Kickstand. I purchased the platinum version of the seidio surface case from best buy and it lacks the kickstand. Will probably return it and get the surface case with the kickstand instead. All in all, Thanks for the Pics!
I have really been considering this case. It seems really nice. The only thing that has me not wanting a case on this phone is I'm worried it will detract from the ergonomics of the screen. The lip around the screen looks like it will make it more difficult to use the edges of the screen.
Sent from my HTC One X using xda premium
dragunbayne said:
I have really been considering this case. It seems really nice. The only thing that has me not wanting a case on this phone is I'm worried it will detract from the ergonomics of the screen. The lip around the screen looks like it will make it more difficult to use the edges of the screen.
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
I got both this one and the Surface case at the same time so I could compare them. I have to say that I absolutely love the Surface case, but was not a fan of the active with kickstand. The Active has that awkward bulge in the back where the kickstand is, and I just didn't like the look and fit on the phone. The Surface, in my opinion, is just about perfect. It fits great over my Zagg screen protector, and it is very minimalistic and i think it actually helps maintain the phone's natural good looks! If you haven't tried the Surface case, give it a try! ( There's a thread on here somewhere with pictures of the Surface case... I'll try to find it and post a link.)
Edit: here's the link -- http://forum.xda-developers.com/showthread.php?p=25979926
Sent from my Transformer Prime TF201 using xda premium
cbasse said:
I got both this one and the Surface case at the same time so I could compare them. I have to say that I absolutely love the Surface case, but was not a fan of the active with kickstand. The Active has that awkward bulge in the back where the kickstand is, and I just didn't like the look and fit on the phone. The Surface, in my opinion, is just about perfect. It fits great over my Zagg screen protector, and it is very minimalistic and i think it actually helps maintain the phone's natural good looks! If you haven't tried the Surface case, give it a try! ( There's a thread on here somewhere with pictures of the Surface case... I'll try to find it and post a link.)
Edit: here's the link -- http://forum.xda-developers.com/showthread.php?p=25979926
Sent from my Transformer Prime TF201 using xda premium
Click to expand...
Click to collapse
Thanks for the advice. It looks as though the surface would be better for me since it doesn't seem like it would have the issue I was worried about with the screen.
Sent from my HTC One X using xda premium
I get the surface cases for every phone I buy. I have to have a clip and the surface case is the best option for me. It doesn't add a lot of bulk but still feels protected. I was glad that Best Buy got the platinum case in for the HOX really quick. Identical to the surface case but 10 bucks cheaper.
Sent from my HTC One XL using XDA
Review of Active w/ kickstand
I've had my Active w/ kickstand for a couple of days. I really like the case. I got the blue version. The blue is darker and has a slight metallic tint. I think it looks better than the pictures seidio has posted online. The rubber skin makes the buttons easier to press, and has a great tactile feel. This is great for the power button, which usually took me a couple of tries without the case. I'd prefer the volumes weren't as easy to press, but not a big deal. The kickstand works well for me, but the charging port is at the bottom, when the kickstand is out. So you can't charge and use the kickstand at the same time. The edges of the screen are easy to use, unless you use the advanced setting in chrome that puts the menu button on the side. Also the lip, can interfere with your screen protector. I had to readjust mine to make sure it didn't line up with the edge of the lip, otherwise the lip tends to push the edge of the screen protector up.
Hope that helps, anyone considering this case.
Confused
http://www.amazon.com/Seidio-CSK3HT...LRRI/ref=sr_1_8?ie=UTF8&qid=1339456253&sr=8-8
On Amazon, Seidio claims that this case fits both the AT&T One X and the International One X. Does it indeed fit both, or just ours, or just the International? I need to buy a case, and I would prefer one with a kickstand. If anyone can tell me if the one on Amazon fits, that would be great. It would also be really helpful if you posted a link to a case for the AT&T One X that offers superior protection to the Seidio case, but also has a kickstand, but ideally I would like to order the Seidio for the AT&T One X. Sorry to be so demanding, but I won't take this phone out of my house until I get a case, and I really want to show it off at school
It does fit..i have the one for the international and it fits snuggly on my xl
Sent from my HTC One XL using XDA
Just bought this in black, the exoskeleton idea is cool. My adreama case always felt like it works scratch it when removing.
Hail Cobra!
I've always liked seidio's products. Especially their active line cases. the AT&T rep was trying to get me to buy their $50 POS hard case. I didn't, the plastic feel just isn't good for me. Plus also the seidio holster is a lot better.
I got the case in red. I think it looks great. The kickstand does feel a little cheap but it ain't bad. I can live with it When propped up, it does its job quite well. My only complaint about the case is that because the edges of the screen on this phone are not raised, the case rubs up against the edge of my screen protector and it keeps lifting it then I push it back down. I may have to try to find a screen protector that has some stickiness to it.
ChongoDroid said:
Just bought this in black, the exoskeleton idea is cool. My adreama case always felt like it works scratch it when removing.
Hail Cobra!
Click to expand...
Click to collapse
@ChongoDroid, where did you buy it from? Anyone has them locally in Vancouver?
shgadwa said:
I've always liked seidio's products. Especially their active line cases. the AT&T rep was trying to get me to buy their $50 POS hard case. I didn't, the plastic feel just isn't good for me. Plus also the seidio holster is a lot better.
I got the case in red. I think it looks great. The kickstand does feel a little cheap but it ain't bad. I can live with it When propped up, it does its job quite well. My only complaint about the case is that because the edges of the screen on this phone are not raised, the case rubs up against the edge of my screen protector and it keeps lifting it then I push it back down. I may have to try to find a screen protector that has some stickiness to it.
Click to expand...
Click to collapse
Zagg up the screen and it should stay down just fine.
Sent from my HTC One X using Tapatalk 2
nameanyone said:
@ChongoDroid, where did you buy it from? Anyone has them locally in Vancouver?
Click to expand...
Click to collapse
Unfortunately not, Amazon.ca was the best it got. Wireless wave has some gel cases and possibly even otterbox cases. These however are not anywhere in stores
Sent from my HTC One X using xda premium
pside15 said:
I get the surface cases for every phone I buy. I have to have a clip and the surface case is the best option for me. It doesn't add a lot of bulk but still feels protected. I was glad that Best Buy got the platinum case in for the HOX really quick. Identical to the surface case but 10 bucks cheaper.
Sent from my HTC One XL using XDA
Click to expand...
Click to collapse
One side note on the Surface is the fact that when using the kickstand, the USB port is underneath, preventing you from charging it at the same time
But still, it's the best fit for the looks of the phone and protects the camera so you don't have to worry about setting it down roughly. my 2 cents
Have the same case but in black. Seems like it will def protect the phone. Feels good, haven't used the kickstand yet but will hold the phone up. Fairly easy to install and remove. Thought about the Surface case but wanted a case just for when I'm in the garage or outside at the beach or something so went with some extra protection. Rest of the time just use the phone as is with a screen protector. Like the design of the phone so don't care to have a case on it all the time.