Okay Guys I have now decided to stop my porting of MIUIv4 as we have official build now... So this thread will just be open to discuss bugs and share anystuff related to miui...and also link up some mods that will make life for newbies easier and be one point source for desire s miuiv4 issues...I will just update whatever kernel and stuff is needed so that you can flash a clean installation always...
Thanx guys for your support...Cheers to the community
Fully-Functional :
Battery history
Bluetooth & WiFi
Bluetooth Headset / A2DP
Google Apps
GPS
Headset / Headphones
HW Acceleration
Microphone when using apps
Mobile Data
Mobile Data usage logging
Sensors (Proximity, Light, Compass, Rotation)
Touchscreen
USB Mass Storage
USB Tethering
WiFi tethering
Camera
Camcorder
Semi-Functional :
Non-Functional :
Changelog v2.9.14 : Changelog
Installation Instructions:
Official MIUI :
- Take care your hboot is either 2* (if hboot was 0.98*) or 7* (if hboot was 6.98*) else update hboot 1st...
- Full wipe mandatory (A clean installation always gives a stable rom experience) unless coming from official miui version
- Flash Rom
- Optional Kernel : You can flash attached kernel it has capacity to OC, governors and IO schedulars
- Reboot and setup everything
Optional Language Packs
- Reboot into recovery
- Flash Language Pack if needed
- Reboot & Enjoy
JB MIUI :
- Full wipe mandatory (A clean installation always gives a stable rom experience) from any rom MIUI or non MIUI
- Flash Rom
- Reboot and setup everything
Download :
ICS :
Official Download
Kernel Thread to Download
Language Pack Download
JB :
2.8.24 Download Credits: Shrome99
Credits :
* miuiandroid community for official one
* amidabuddha for the kernel
* shrome the omnipresent for a JB build
* Prox for helping me with whatever little I know about porting (I mean Proxuser)
* All Devs who helped in some way or the other for ICS development
* Finally Xda and Desire S community for everything
Bugs
yeah thanks Vampire. Definitely gonna try it out.
Thx alot for this - Will absolutely check it out!
Was running Reaper for a while, until this morning, when I got an uncontrollable urge to go back to my good'ol MIUI (GB) nandroid. (which I did).
And then I saw this...
dr.higgins said:
Thx alot for this - Will absolutely check it out!
Was running Reaper for a while, until this morning, when I got an uncontrollable urge to go back to my good'ol MIUI (GB) nandroid. (which I did).
And then I saw this...
Click to expand...
Click to collapse
Upload done...enjoy am off to sleep...
Gn Sd guys
wow will definitely download this thanks bro and i hope all the bugs are fixed soon
had been a miui GB fan and was waiting for a stable MIUI v4.
did a clean install.. so far tooo good!
will report issues if any. thanks for this ROM.
- Spirit FM Light Radio works, BT gets turned on automatically with Spirit. while in radio if you get call radio doest resume (but this is true on all ICS ROMs), a simple restart of Spirit fixes it.
I use miui .18 from blindumb.Since this is also miui,do i need to do any wipes? (Cm9 kernel)
whats the difference b/w your build and one released by blindndumb ?
I'm using this ROM without any issues, however, I couldnt find a setting to disable 'sweep2wake' ?
'Sweep2Wake' does indeed consume a lot of juice, want to see how MIUI v4 battery lasts without that feature.
batmobile_bang said:
I'm using this ROM without any issues, however, I couldnt find a setting to disable 'sweep2wake' ?
'Sweep2Wake' does indeed consume a lot of juice, want to see how MIUI v4 battery lasts without that feature.
Click to expand...
Click to collapse
For that you ll need to apply non patched kernel...
I ll try to give a link of default kernel as well
HaxSync compatibility...
Have one suggestion. Since HaxSync does a pretty good job of syncing high def contact pictures and linking them with phone contacts - works beautifully on AOSP and AOKP ICS ROMs - can you manage do the same with MIUI. If this is manageable it would be excellent since MIUI has one of the best call screens around.
batmobile_bang said:
Have one suggestion. Since HaxSync does a pretty good job of syncing high def contact pictures and linking them with phone contacts - works beautifully on AOSP and AOKP ICS ROMs - can you manage do the same with MIUI. If this is manageable it would be excellent since MIUI has one of the best call screens around.
Click to expand...
Click to collapse
I don't know but since previous version full screen isn't working with haxsync...some issue...
So we can edit join with haxsync contact...then again click edit and select haxsync and then use this photo...contact uses the haxsync photo...but caller screen still not full screen...since last week's version...hopefully this week they solve it
one suggestion, can you please have supercharger v6 preinstalled in your future MIUI releases.
AND also when will this rom be released on kernel 3? RATHER THAN ON CM9 KERNEL
That will be just awesome..
brainzasif said:
one suggestion, can you please have supercharger v6 preinstalled in your future MIUI releases.
AND also when will this rom be released on kernel 3? RATHER THAN ON CM9 KERNEL
That will be just awesome..
Click to expand...
Click to collapse
When CM9 have kernel 3
Sent from my HTC Desire S using Tapatalk 2
There is no Play store in this ROM :/?
Will be all over this as soon as Camera works!
This ROM is a lot more stable than the BlindMIUI version! No reboots during Music/GPS tracking combo!
Is it possible to add the GPS fix to this ROM? http://forum.xda-developers.com/showthread.php?t=1442032
papaganz said:
This ROM is a lot more stable than the BlindMIUI version! No reboots during Music/GPS tracking combo!
Is it possible to add the GPS fix to this ROM? http://forum.xda-developers.com/showthread.php?t=1442032
Click to expand...
Click to collapse
Will add in next version
please also consider adding super charger v6 to this version.
Related
Hello everyone,
This is my first shot on porting a ROM. I always wanted an AOSP ROM that was lightweight, fast and stable.
With the help of superkid and proxuser, I've managed to port this ROM to our beloved device.
What is working:
- everything
What is not working:
- report
Credits go to:
superkid for the help provided. Thank you, I really appreciate it !
proxuser for the initial port
hrkfdn for the Desire HD port
adamg for Oxygen ROM
cayniarb for Tiamat Kernel
everybody who supports this ROM.
Changelog
26.08.2011 - First Release
10.09.2011 - Second release
- Sound fixed
- Calls work now
- 3D semi-fixed
- Rotation fixed
19.11.2011 - Third Release
- Everything works !
25.11.2011 - Fourth Release
- Fixed sound on video recording
- Maybe fixed battery drain with data on(needs testing)
- Patched framework with better autobrightness values
- Smoother animations and scrolling
Instructions:
- Wipe Data/Cache
- Flash zip
- Optional flash Tiamat kernel
- Reboot
- Enjoy !
Download links:
Oxygen 2.3.2 - Saga
Addons:
Tiamat Kernel
Is this a port the the Oxygen ROM from Desire made by AdamG ?
Yes.
10char
Will try your ROM, hopefully everything will running smoothly. Soon i will get back with some review
Thanks, it wont work so good as we know, there is 3d drivers issue that make it slow, and others
Stay tuned. This ROM will be the smoothest and the fastest one around here.
Sent from my Desire S using xda premium
That's great news. If we get it fully working then we can port everything for saga
Sent from my HTC Desire S
loool When I had a HTC Hero my favourite ROM was Cronos from Feeyo D
http://cronosproject.org/forum/
Nice looking forward to this fully working
Me too and I contacted feeyo for a desire s Rom. Will let you know if there is something new.
Sent from my Desire S using Tapatalk
Seems no1 is testing it till its fully working...
k here i go...
m downloading it...
wud give a full review in sometime...
Review :
Rom too slow...
absolute dead laggy...
as if running windows7 on p1...
so couldn't test nethng...
all i can say is all d best...
really appreciate your efforts...
Guys I made some progress:
Sound - works
Rotation sensor - works
Brightness - works
3D Drivers - works but with some glitches, will try to fix them
Will upload the build tonight for testing purposes, till then fixing some more stuff.
I have to say it's amazingly fast. I am stunned.
bioan said:
Guys I made some progress:
Sound - works
Rotation sensor - works
Brightness - works
3D Drivers - works but with some glitches, will try to fix them
Will upload the build tonight for testing purposes, till then fixing some more stuff.
I have to say it's amazingly fast. I am stunned.
Click to expand...
Click to collapse
Gr8...
I ll test agn
Is it usable now...
wanna taste its speed...
Hydrogen till date fastest i have seen
Here it is: http://www.multiupload.com/SPB6IQX5KV
You will get some FC's on gapps, don't know why, but you can get an idea of how fast it is and how it works.
Do not use it as a daily ROM, it's still in development. Thanks !
great work guys. AOSP was only thing missed in Desire S Forums
Also, don't forget to check the progress here: http://forum.xda-developers.com/showthread.php?t=1256692
This ROM uses almost everything from AOSP.
there's a guy doing a port of this over at the oxygen forums too
http://forum.oxygen.im/viewtopic.php?id=489
are you him/her?
thanks for this btw. testing it now.
Yep, its him and i back working on the aosp and he basing it on my release, it means that if i get to fix them will be fixed here too
IStock - RoadRunnerEdition - v1.1.0
:::::::::::::::::::Changelog:::::::::::::::::::
1.1
- add Addfree Host file
- Translate to English
- Add more Flags
- ssh / zip / rsync Terminal support
1.0.1
- Market fixed
- Data Apps flags fixed
1.0
- V10k
- Deodexd / Zipalign
- Tweaks / Hacks added
- Flag support with MIUI Flag Configer
- ICS Bootanimation
- add data/apps
:::::::::::::::::::MIUI Flag CONFIGER:::::::::::::::::::
Go to Market, download the MIUI Flag Configer! You need this to choose your Flags.
This App allows you prior to installation of the Rom adjust to your liking.
Thus, the Rom will be bigger, but it can always be adjusted.
1. Download the Miui Flag Configer
2. Download the RoadRunner Rom
3. Start Miui Flag Configer - > Choose Settings
if you had the Rom in /sdcard/Downloads/ edit the sdcard dictory to /Downloads
if you had the Rom in /sdcard/ leave it blank
4. Restart Flag Configer , now you can choose the Rom
5. Choose your Flags and safe. Try Reboot or Reboot manuell in recovery and flash the rom
Big Thanks to M1cha
::::::::::::::::::: DOWNLOAD ROM :::::::::::::::::::
Download RoadRunner v.1.1.0
Download RoadRunner v.1.0.1
Download RoadRunner v1.0
Have Fun
No miui?
Sent from my LG-P920 using Tapatalk
Screenshots please!
Well I've been running 1.0.1 for a few days now and its rock solid, battery life pretty good too. I used to run Roadrunner Miui on my O2X and it was the best one out, so glad to see you've moved onto O3D...
nice ROM!!
lunudog said:
No miui?
Sent from my LG-P920 using Tapatalk
Click to expand...
Click to collapse
Sry, no miui Have to wait for cm9 and miui 4.0 maybe I will try to add some miui staff.
No Screenshots needed atm rom looks like stock
Sent from my LG-P920 using Tapatalk
Update
Just canceled version 1.2 and i didn't think that I will bring a gb rom
Atm I m using my RE cm7 Rom, and it works great. Hopefully arcee will fix open3d. So my next Rom will be based on cm7 sk2. If arcee will add 3D nightlys im ready to kang it
So if you don't really need 3D atm and want a fast rom (and stable for me atm, still testing) you can download here at the weekend the new RoadRunner based on CM7!
Maybe I will try to port miui on this rom, if I have the time.
Or I will wait till cm9
Sent from my Optimus 3D using Tapatalk
Gerrett said:
Update
Just canceled version 1.2 and i didn't think that I will bring a gb rom
Atm I m using my RE cm7 Rom, and it works great. Hopefully arcee will fix open3d. So my next Rom will be based on cm7 sk2. If arcee will add 3D nightlys im ready to kang it
So if you don't really need 3D atm and want a fast rom (and stable for me atm, still testing) you can download here at the weekend the new RoadRunner based on CM7!
Maybe I will try to port miui on this rom, if I have the time.
Or I will wait till cm9
Sent from my Optimus 3D using Tapatalk
Click to expand...
Click to collapse
Thank you for your work. Following you
Miui for this phone would be awesome, used to love Miui on my O2X. Having said that a stable CM7 would be very nice too. Think I'm gonna wait for the Roadrunner based on CM7 and give that a go because after the intial showing everyone the 3D I don't really use it that much now. I just want a stable camera....
Please could someone explain me what is MIUI and what's the difference of this rom among others ? So as far as I can understand MIUI Flag configurer lets you choose the things that you want to install inside the rom first ?
Good news to know you are working CM7 rom. Do you think HDMI will be fixed in this new ginger based rom ?
CM9 is Ice Cream Sandwitch Cyaonogen rom ?
Thanks !
There is not much difference between the roms at the minute... but hopefully there will be soon...
Used the rom now one day, no reboots feels stable.
After 8,5h 75% akku, Wifi off and 2g data on, google sync on, twitter and Tapatalk. Didn't use it much. Not awesome but ok
Seems like WLAN drains much akku.
Now it's time to add flags and flag configer support!
Sent from my Optimus 3D using Tapatalk
Here's a first test rom if someone is interested
http://www.multiupload.com/H0D23A52B8
Warning : This is a Fullwipe rom! It will wipe your data/cache/dalvik!
Don't forget to download Google apps, atm its not added.
Don't be scary, if the rom boots, after the LG screen you will get a Blackscreen, after that the bootanimation starts.
I think it's the zipaling script how needs some time, but need to look into the log. (at boot the script will zipaligng your system and data apps).
Bugs:
This Rom Based on CM7 SK2 - 3D doesn't works.
Please tell me if you find a bug witch didn't you have on stock cm7 sk2
At the weekend I will add flag support for miui flag configer and can hopefully release a smooth and stable as it can be rom. if you have a flag wish, tell me!
If you like Miui take a look a the design chooser
HF
Sent from my Optimus 3D using Tapatalk
It s possible pls see some screenshot of the rom pls?
Thx a lot
Inviato dal mio LG-P920 usando Tapatalk
Gerrett said:
Here's a first test rom if someone is interested
http://www.multiupload.com/H0D23A52B8
Warning : This is a Fullwipe rom! It will wipe your data/cache/dalvik!
Don't forget to download Google apps, atm its not added.
Don't be scary, if the rom boots, after the LG screen you will get a Blackscreen, after that the bootanimation starts.
I think it's the zipaling script how needs some time, but need to look into the log. (at boot the script will zipaligng your system and data apps).
Bugs:
This Rom Based on CM7 SK2 - 3D doesn't works.
Please tell me if you find a bug witch didn't you have on stock cm7 sk2
At the weekend I will add flag support for miui flag configer and can hopefully release a smooth and stable as it can be rom. if you have a flag wish, tell me!
If you like Miui take a look a the design chooser
HF
Sent from my Optimus 3D using Tapatalk
Click to expand...
Click to collapse
Hows the camera because I found the one in SK2 a little buggy
Edit: Camera still the same on this one, pics have got a funny tint to them and when you try to take a pic in the dark, the flash goes off but it must take the pic after because the pic is really dark... cant do without the camera.
I will say that other than the camera, seems fast and stable and the miui theme is very nice
Thanks Gerret! If I download this rom will I need to download and flash another one once you release the flag support for miui flag configer ? I don't know if try it now or wait a little more...thanks !
Jordibcn said:
Thanks Gerret! If I download this rom will I need to download and flash another one once you release the flag support for miui flag configer ? I don't know if try it now or wait a little more...thanks !
Click to expand...
Click to collapse
Yes, I'll changed more than just the flags. But you can then flash without a full wipe. Didn't know if I will release this weekend, didn't have much time this week
Sent from my Optimus 3D using Tapatalk
Have you 've been able to fix HDMI functionality ? Maybe Ricardo Cerqueira (cyanogenmod) can give you a hand. Do you know him or have contact with him ? I follow him on google +. I'll check your rom this weekend as new gingerbread leaked version seems to lack of radio 3G functionality. Also I love that MIUI thing and the cool looking. Could please post some screens of the MIUI feature ? Thanks!!
Jordibcn said:
Have you 've been able to fix HDMI functionality ? Maybe Ricardo Cerqueira (cyanogenmod) can give you a hand. Do you know him or have contact with him ? I follow him on google +. I'll check your rom this weekend as new gingerbread leaked version seems to lack of radio 3G functionality. Also I love that MIUI thing and the cool looking. Could please post some screens of the MIUI feature ? Thanks!!
Click to expand...
Click to collapse
No, didn't fixed it. I think that I can't fixed it, I'm not a great dev as arcee is it and atm there's no 3d source from cm7. I know him, but didn't have contact. I just modify
The rom, and look if there's anything I could fix. But the most bugs can only arcee I think.
It's not a real future, it's only theme, but Screenshots will follow with release.
I started to port full miui based on cm7, if I get it booting I will make a new thread, but I will need help porting the framework.
Sent from my Optimus 3D using Tapatalk
Hey guys you dont know me but im drewis (w/ Evervolv), the N1 guy that built all (or at least most) of the builds Sandvold released. I don't have a desire to test on so i built; then gave them to Sandvold to fixup and make things work.
Anyway here's a fresh build for you straight from evervolv ics repo.
Built for stock bootloader.
these things (at least) are working:
3g (auto connecting) (and signal strength)
Bluetooth
Camera (partial)[thanks rapmv78](will be included in p3) for now do in manually
Compass
GPS
Headphone jack
TouchScreen (multitouch)
Trackball (w/ wake)(wake doesnt work in p2 forgot to add it in.)
Wifi (and signal strength)
Will update this list as more things are confirmed working
remember i dont have a desire so i rely on you guys to report things for me
Click to expand...
Click to collapse
Not working:
Some Gapps dont work properly (Not much i can do for you there)
Full Hardware Acceleration (need kgsl driver backported from msm-3.0)
Click to expand...
Click to collapse
If there is enough interest, I will continue with development.
Bringing you the latest and greatest from Ice Cream Sandwich.
follow development on the Evervolv gerrit:
review.evervolv.com
irc:
#ics_desire_nexus_dev or #evervolv
Edit [1/1/12]: Congrats! The Desire has offically been added to the Evervolv repo.
Build instuctions:
Code:
repo init -u git://github.com/Evervolv/android.git -b ics
repo sync
. build/envsetup.sh
breakfast bravo
mka
More info about HWA:
Ideally we would want a 3.0 kernel to do it 'properly' but that is a lot (read very very very difficult) of work and imo it's not worth it.
What should be done instead is backport the kgsl driver from cafs msm-3.0
This is an issue for all 8x50 (qsd8k)( adreno200) device's. ie n1, desire, inc, evo4g, and all the others
Right now I'm feeling left out as kali- did it for 7x30 (adreno205) and toastcfh did it for 8x60 (adreno220).
And if i am not mistaken they all use the same driver.
So someone could reference kali- and toastcfh work and get it going on adreno200
CHANGELOG / Downloads
Mirror: http://code.google.com/p/desireics courtesy frogfire
All builds for stock bootloader.
Evervolv-Desire-2.1.0p2
whats new in p2
6bar signal strength icons
Lockscreen: bring back tab and rotary style, defalut 3way ics style can now choose what app you want. all options in EVToolbox (all thanks to preludedrew...i did pretty much nothing lol)
Rebuilt kernel: based on Evervolv/tiamat-kernel 8x50 branch
facebook sync in contacts
And i think thats it... enjoy your new year.
Thanks Raikesy for testing
Flashable zips:
with gapps (system size 203mb): Evervolv-Desire-2.1.0p2-bravo.zip - 124.4 MB
without gapps (system size 169mb) : Evervolv-Desire-2.1.0p2-bravo-nogapps.zip - 99.6 MB
Evervolv-Desire-2.1.0p1
Does not have full hardware acceleration only the partial that the other builds have (rapmv78 and rmcc mods)
Includes:
Gapps
Tristan202's kernel
Init.d with my own homebrew apps2sd type "a2sd install" to activate or "a2sd" no arguments for the help menu.
Note: (you can flash any apps2sd over it and they should also work)
Note2: you only need to type a2sd install once. after that as long as you don't format you /sd-ext partition. It will auto reinstall after a wipe. (It does this by putting the a2sd flags on /sd-ext as opposed to /data. I did this 100% because i am lazy and wipe my phone almost everyday and really hate typing a2sd install then waiting for it to reboot and set everything up this way it does it on first boot)
USB: Experimental native Usb Mass Storage
Phone: option to disable voicemail notifications
Lockscreen: experimental 3way style (silent toggle / unlock / open mms app)
Note: (mms app is hard coded for now, options for custom app coming later)
Thanks sadisticveneer(sadven) for testing it for me.
Flashable zip: Evervolv-Desire-2.1.0p1-bravo.zip - 125.3 MB
just in case
Kudos on your work so far..will be syncing your repo and testing soon.
Let me know if you want a download page with file hosting, and resume support for file downloads..
Sent from my HTC Desire using Tapatalk
Downloading the flashable zip right now...
texasice said:
Evervolv-Desire-2.1.0p1
Does not have full hardware acceleration only the partial that the other builds have (rapmv78 and rmcc mods)
Includes:
Gapps
Tristan202's kernel
Init.d with my own homebrew apps2sd type "a2sd install" or "a2sd" no arguments for the help menu.
Note: (you can flash any apps2sd over it and they should also work)
USB: Experimental native Usb Mass Storage
Phone: option to disable voicemail notifications
Lockscreen: experimental 3way style (silent toggle / unlock / open mms app)
Note: (mms app is hard coded for now, options for custom app coming later)
Flashable zip: Evervolv-Desire-2.1.0p1-bravo.zip - 125.3 MB
Click to expand...
Click to collapse
Thanks for the gr8 ROM.. a2sd needs to be activated? or it is installed by default?
and may I have ur permission to make a cm7r2 HBoot compatible ROM ?
Edit: another Qx, is it synced with CM9 repo?
I will try it now hope you will continue the building for the desire!
Sent from my HTC Desire using xda premium
What's the difference between this and sandvolds ice build?
Sent from my HTC Desire
Hope there will be a 7cr2 Hboot version
Sent from my HTC Desire using xda premium
abellimz said:
What's the difference between this and sandvolds ice build?
Sent from my HTC Desire
Click to expand...
Click to collapse
this is based on 4.03, sandvold's one should be based based on 4.01
but I do not know the others defferences
installing now, also the boot animation is different
pbotloh said:
Hope there will be a 7cr2 Hboot version
Sent from my HTC Desire using xda premium
Click to expand...
Click to collapse
am not sure it will be.. already did a DATA version..
trying to make cm7r2.. with no success for now.. need to delete lot of apps.. I will be trying to look around..
Edit: here is a data version http://www.multiupload.com/59RT67IM2L
it lakes some apks (including setupwizard.apk, u still can do all u need manually) and some media files..
I replaced the maps.apk with mpas6.0.3modded by Brut. and replaced the launcher with trebuchet launcher from CM9
pbotloh said:
Hope there will be a 7cr2 Hboot version
Sent from my HTC Desire using xda premium
Click to expand...
Click to collapse
I used fast boot commander to switch between hboots and flash different roms, pretty easy though. Better than waiting for a stripped down version.
Sent from my HTC Desire using XDA App
Camera is very important. So, it needs to be implemented...
sameee781 said:
Camera is very important. So, it needs to be implemented...
Click to expand...
Click to collapse
Agree with you, so how about you get it up and running, because you seem to know everything about the drivers?
Jeez, developers do this for the community, you have no right to command them. Camera will be supported eventually, or start working on it yourself.
@Texasice: about this msm-3.0 thing for the GPU: so we have to backport the driver from a Linux 3.0 kernel? That means, upgrading the kernel to 3.0 should do the job too? And is there any driver available for 3.0 to backport, or do we have to write it ourselfs first?
Edit: I'm going to set up a Linux environment again here, and try to get a newer kernel running on the Desire. Perhaps 2.6.40 or 3.0? (Which seem to be almost identical). Give me one week, and hopefully I can give you guys something back
Chaosz-X said:
@Texasice: about this msm-3.0 thing for the GPU: so we have to backport the driver from a Linux 3.0 kernel? That means, upgrading the kernel to 3.0 should do the job too? And is there any driver available for 3.0 to backport, or do we have to write it ourselfs first?
Click to expand...
Click to collapse
there is.. the galaxy nexus one.. I dont know how much it could help..
there is one for SGSII too, from CM9, but same issue.. dont know how it could help..
I know a guy nicknamed shaky is working on it, and he tweeted, before christmas, that 90% of the work is done.. have no update about this..
About time someone continued work on ICS for the HTC Desire
Thanks and keep up the good work!
thanks a lot, the ROM is awesome and working fine
no problems so far
This rom is bloody brilliant Drewis!
so much faster and smoother than previous builds, great job!
Don't suppose anybody has a flashable for the included kernel so i can go ahead and test Tiamat do they?
want to be able to revert incase it doesnt work without reflashing the whole rom.
Signal bars works!that doesn't work properly in the Sandvold's.And I love the new 3-direction lockscreen.thx bro!
MOTIVATION
Welcome in the official thread of the project. This post is made to let discover you why this project is born. We are two universitary students that want more about a new branch of th IT Area, the Embedded OS Porting. We have a particular device, the HUAWEI IDEOS U8150, so our port is in this direction.
So don't ask to us why we are porting this version of Android with this device, because this project starts for educate ourself to the porting of Android OS, in particular we are oriented to port CyanogenMod ver 9. We made research to define a good porting for this device, so all the support ,moral, technical and economic(we need more RAM and CPU frequency) is really appreciated. We are also thinking to port, after this ROM Porting, the MIUI v4.
We work to create a stable ROM that could enjoy all great people that have this device. We think that newest releases of Android could run on this kind of mid-low level devices, so we make all the possible to complete this work.
The xDEOS team
raidenfox
sebaker
INFO ON THE STATUS OF PROJECT
Official Website: Here
G+ Page (daily updates) : Here
ABOUT THE ROM
This is the status of our working ROM:
ALPHA 3 (4.0.4)
CODENAME
xDEOS_u8150-alpha3-CM9-signed.0.0-UNOFFICIAL.zip
Changelog
resized system image
removed calendar and example audio and video files
added all GAPPS
more smooth
resized system (only 96MB)
Wi-Fi finally fixed
Internal Headset works (i hope in all devices and not only U8150D)
Removed Gallery (while we fix graphics we don't insert it in)
DOWNLOAD
Here or on the official website
----------------------------------------------------------------------------------------------------
ALPHA 2 (4.0.4)
CODENAME
xDEOS-9.0.0-RC0-u8150-UNOFFICIAL-alpha2-signed
Download
Official Site
Changelog
Update to 4.0.4 Distribution
Removed annoying Red Border
Modified codename
----------------------------------------------------------------------------------------------------
ALPHA 1 (4.0.3)
CODENAME
cm_u8150-9.0.0-KANG-alpha1-signed.raidenfox
WORK
USB
MMC
Browser
Gallery (without HW Acceleration)
Overclock
Thetering
Audio
GPS
Contacts
Wi-Fi
RIL (partially solved)
SENSORS (G - Sensor)
NOT WORK
Graphics Hardware Acceleration
Camera
Bluetooth
other bugs not known..
All the details about the ROM (status of bugs in bugtracker section) is available on this site.
http://www.xdeos.eu
Sorry for my bad english
SCREENSHOT
CWM INSTALLATION
Boot in recovery mode
Flash CWM
Reboot you Phone in recovery again
HOW TO FLASH THE ROM
Select Install from zip
Select cm_8150 zip file downloaded on official site
Flash it
After flash do a wipe/cache
Clean cache
Reboot phone
You have installed xDEOS!
i already tried this cm9 it good but some time of use it started to lag
Have you tried alpha2 ? ANd have you set a little bit of overclock ?
[/COLOR]
tonystark88 said:
Have you tried alpha2 ? ANd have you set a little bit of overclock ?
Click to expand...
Click to collapse
no i tried alpha 1 from other thread i'm not tried alpha 2 now i'm downloading but can't try now because my mom use u8150 and no i't started to lag of 10 hours use
When u have time try it
Sent from my GT-S5660 using xda premium
Ported android kernel 2.6.35 from U8160. New alpha soon
Android Kernel 2.6.35
Sent from my GT-S5660 using xda premium
Hey, tried it out, works great on my T-Mobile Comet. No SIM card, so don't know how it does on the network, but yeah, it's usable, thanks for this!
Is there a way to get haptic feedback on the soft buttons?
May want to put on the first page how to install ICS gapps.
For some reason, Gapps won't work.
Hitorijanae said:
For some reason, Gapps won't work.
Click to expand...
Click to collapse
GApps fare note included yet
Sent from my GT-S5660 using xda premium
Fitchman said:
Hey, tried it out, works great on my T-Mobile Comet. No SIM card, so don't know how it does on the network, but yeah, it's usable, thanks for this!
Is there a way to get haptic feedback on the soft buttons?
May want to put on the first page how to install ICS gapps.
Click to expand...
Click to collapse
Your SIM id not recognized?
Sent from my GT-S5660 using xda premium
New site and new informations on the status of project here.
tonystark88 said:
Your SIM id not recognized?
Sent from my GT-S5660 using xda premium
Click to expand...
Click to collapse
No, I just literally had no SIM in it, so I couldn't try data.
i tried alpha 2 and it's not lag as alpha 1 good job
can you work for lg optimus me p350 cm9 i'm working on aosp ics but cm9 is good then aosp ics i tried many times to boot cm9 but always getting not bootable rom,
new alpha 3 is coming out...in upload...
Alpha 3 comes out. Changelog, download link and other news/details on the official page
cips gokhle said:
can you work for lg optimus me p350 cm9 i'm working on aosp ics but cm9 is good then aosp ics i tried many times to boot cm9 but always getting not bootable rom,
Click to expand...
Click to collapse
I don't have the device and this (xDEOS) is my first port, but we can try to do it, maybe you can cooperate with me and test releases on your device if u want.
New alpha 3 version in the head of post and on the official website. News for testers in the website.
New photo with this changelog:
resized system image
removed calendar and example audio and video files
added all GAPPS
more smooth
resized system (only 96MB)
Wi-Fi finally fixed
Internal Headset works (i hope in all devices and not only U8150D)
Removed Gallery (while we fix graphics we don't insert it in)
Gallery is not installed but you can install quickpic, a beautiful gallery
Well done boys!! Great job! But the RIL works??
[ROM][4.0.4][29.01.13] BananaSandwich v0.2 - first smooth & fast ICS ROM (CM9 based)
Download:
http://www.mediafire.com/?e870iwf5ejptd
installation:
#1: Download and put files to sdcard
#2: Flash Recovery_Patch-ICS_banana4444.zip (phone will automatically reboot into recovery; superwipe included)
#3: Flash ROM: BananaSandwich_v0.1.zip
(#4: Flash FontPack-ICS_banana4444.zip) optional - see what this contain, if you won't use these fonts, don't flash this file
#5: Flash kernel: ezgb-2636-v1.5.3-ics_S.zip
#6: Flash boot-v1.5.9-Alpha3-CustomMTD_S.zip
#7: Reboot and wait few minutes
If there will be sth wrong with sound after first boot, reboot phone into recovery and type in cmd: adb shell fix_permissions (it won't help to ringtones)
cmtd - 120 / 3
FontPack contains:
DroidNaskh-Regular.ttf
DroidSansArmenian.ttf
DroidSansEthiopic-Regular.ttf
DroidSansFallback.ttf
DroidSansGeorgian.ttf
DroidSansHebrew-Bold.ttf
DroidSansHebrew-Regular.ttf"
DroidSansMono.ttf
DroidSansThai.ttf
Requirements:
* Radio 28.25/27.08
* SPL 0013d
* Ra-dream recovery (or cwm but you need to use cmtd)
http://www.mediafire.com/?a3ay0gxvfj9y8
Credits:
jordfaz - for great base
CyanogenMod - for base of base
PowerPlop - for helping me to solve many problems
tvall - for invaluable advice and his files
ezterry - for kernel
dsixda - for best android kitchen
Works:
Wi-Fi (fixed)
Audio (fixed)
Touchscreen
Screen rotation
Hardware acceleration
Data
Call
Apps
Backlight
Keyboard
Root
Vibration
Mobile network
SD card - fixed
Auto rotation - fixed
Physical keyboard (except shift and alt keys)
All buttons (like 'Home')
Doesn't work:
Camcorder
Bluetooth
Camera
ADB
ext
Not tested:
GPS (should work)
Compass
v0.2
SD Ext - fixed
Impressive!
Wow, 3rd ICS for G1!!! Looks amazingly fast (for ICS), how did you do it? I'm assuming it's the hw acceleration. Where's the Dalvik cache stored, that was a big problem in terms of speed for previous ICS ROMs.
I now have a G2 (Desire Z) so will be able to test this in the near future + give feedback
Youtube working?
Build-in screenshot function is working?
What ROM did you use as a base?
firstly i used your rom as a base (on video) with tvall's and jcarrz's files help, but now im working on cm9 - much faster and stabler
screenshot works, i'll check youtube later
Great to seem some more ics love! Ill have to try this out come the weekend! Thanks much!
Sent from my HTC Vision using Tapatalk 2
cm9 based rom in 2nd post, tell me guys, what you think about it
if you have ideas how to fix issues, send me pm with solution, i'll be very thankful
banana4444 said:
cm9 based rom in 2nd post, tell me guys, what you think about it
if you have ideas how to fix issues, send me pm with solution, i'll be very thankful
Click to expand...
Click to collapse
Which ROM did you use for the CM9 base? Rotation works right (no black screen).
Let me know if you have tested youtube.
cm9 base: http://forum.xda-developers.com/showthread.php?t=1620617
i can't test youtube now, because wifi, sdcard & adb doesn't work yet, but i'm working on it
most important thing is fixing adb, rest will be much easier then
If you have any questions, you may always PM me!
Sent from my Sapphire using xda app-developers app
hey OP thanks for puttin in work on this ancient device
I go to work @ 4 PST, do u think the links will be up by then? thx
banana4444 said:
Doesn't work:
Camcorder
Bluetooth
Wi-Fi
Camera
ADB
SD card
Auto rotation
Click to expand...
Click to collapse
Some of these sound like a kernel issue. What kernel are you using?
ezgb-1.5.3 ics
I don't think these are kernel issues, because it works fine on powerplop's base. Few of them should be fixed tonight.
My mind is blown!! Im trying this as soon as i get home and flash it to my G1. I wonder if, when HTC made the G1, they had the slightest idea that almost four years latter it would still be getting use and that more importantly it would have such advanced software forced into it and still run nicely.
banana4444 said:
ezgb-1.5.3 ics
I don't think these are kernel issues, because it works fine on powerplop's base. Few of them should be fixed tonight.
Click to expand...
Click to collapse
Yeah, that kernel should be fine. I'm guessing libs?
Well, cool! Best of luck to you!
Are you going to github your project?
so....how about that rom?
I'm awaiting patiently this release (so patiently that I keep refreshing this thread).
This would be a great boost for my cellphone, because everyone else is all happy with their 4.0, 4.1 and 4.2s in their all new cellphones.
1.5.3-ics? Is it safe to assume that's the one I built? If so, did you try the linaro one? It should perform a little better.
I should get back to work on my ics and jb roms and kernel. I've been really neglecting my android projects recently...
tvall said:
I should get back to work on my ics and jb roms and kernel. I've been really neglecting my android projects recently...
Click to expand...
Click to collapse
Not like you have done a lot of great stuff for our community already. Just saying...
tvall said:
1.5.3-ics? Is it safe to assume that's the one I built? If so, did you try the linaro one? It should perform a little better.
Click to expand...
Click to collapse
Yes, I tried, but it doesn't even boot. Any ics rom doesn't boot for me with this kernel.