I was just wondering if everyone has the screen rippling issue when u press down on the screen. Also, based on people who have reported this issue, it appears to be a lot more common in white H1X's. Anyone care to share?
I noticed this in the store when initially checking out the phone before buying BUT it only seems to happen on the very edges of the screen and you need to press pretty damn hard to get it to do that. Hasn't actually affected real world usage for me since pressing the screen that hard is never necessary, especially on the outer edges.
Just tested mine out, no matter how hard or where I press I cannot get it to happen even a tiny bit. Apparently it only affects some devices.
You mean the same screen ripple that you see when you press on any LCD display?
I just tried on my phone while it displayed a white image and a black image, and I didn't see anything. But I can do it on my computer and TV. I thought that was typical of LCD displays.
jmattp said:
You mean the same screen ripple that you see when you press on any LCD display?
I just tried on my phone while it displayed a white image and a black image, and I didn't see anything. But I can do it on my computer and TV. I thought that was typical of LCD displays.
Click to expand...
Click to collapse
it is, and especially on a phone this thin. I was told an explanation, but I can't remember for the life of me. But I never notice it from day to day use.
vioalas said:
it is, and especially on a phone this thin. I was told an explanation, but I can't remember for the life of me. But I never notice it from day to day use.
Click to expand...
Click to collapse
I assumed the ripple was because it's a Liquid Crystal Display.
Regardless, I've never seen it on mine. I have the dark grey one. Maybe some units have a thinner panel?
I actually know why this happens with HOX. Anal Torture & Tyranny told me to call HTC about replacing my phone. Talking with them explained my situation.
Phone where the lower right edge sits higher also causing a light leak, also causes the ripple is due to the battery cable inside the phone not sitting flush in the body. Also, there is a gasket that should be internal in the phone its basically electrical tape. Sometimes it rolls up causing the same problem.
Because of the battery cable not sitting flush it adds pressure behind the screen making the liquid crystal more prone to the ripple due to stress. Instead of flush in concave or convex depending on how you look at it.
Sent from my HTC One X using xda premium
ethantarheels123 said:
I was just wondering if everyone has the screen rippling issue when u press down on the screen. Also, based on people who have reported this issue, it appears to be a lot more common in white H1X's. Anyone care to share?
Click to expand...
Click to collapse
i've seen this on all 4 devices i've had my hands on, and you don't have to press hard at all to get it.
Related
Can anyone else press the screen semi hard with one finger and distort the LCD screen too?
I know it is not normal for anyone to be pressing that hard, but I just want to make sure I do not have a defect before my 14 days return window closes.
Thanks
ive done it before and that happens. It seems to have the same effect on all lcd/led screens with a bit of pressure. IMHO totally normal.
qubit76 said:
ive done it before and that happens. It seems to have the same effect on all lcd/led screens with a bit of pressure. IMHO totally normal.
Click to expand...
Click to collapse
Thanks for the response. I know LCD screens do that, I just wanted to make sure that there wasn't an issue with the glass flexing and pushing on the LCD screen.
So if yours is doing it, then I'm OK with mine doing it too. It's not like we are going to be pressing that hard anyway.
Thanks!
You do know the L in LCD means liquid? If you press hard on any LCD screen this will happen. you are displacing the liquid under the screen. You aren't hurting anything. It corrects itelf in a matter of seconds.
The xoom has a really thin glass panel, this is most likely the reason you can distort the liquid easily
How this distortion looks? It could help discern what type of LCD Xoom is using. (for example pressing my PVA screen show a dark smudge)
angry birds causes me to do this now and then!
I get white smudges. I thought that Gorilla glass would have less flex.
Does it look like this?
I returned mine, as the first one I have doesn't exhibit this. Yes, if you press if really hard, any LCD would show this, but this is barely a tap. I'm using my Wacom stylus here, but it's the same with just my finger. It's actually worst in person, but you can clearly see it happening on the video. And it's only on the right hand side of the screen also, so it's definitely a defect. On mine anyway.
tommyxv said:
I get white smudges. I thought that Gorilla glass would have less flex.
Click to expand...
Click to collapse
Actually, if you look it up on youtube, there are some videos showing how tough it is that also show how surprisingly flexible it is. It's pretty impressive stuff.
Visual360 said:
Does it look like this?
I returned mine, as the first one I have doesn't exhibit this. Yes, if you press if really hard, any LCD would show this, but this is barely a tap. I'm using my Wacom stylus here, but it's the same with just my finger. It's actually worst in person, but you can clearly see it happening on the video. And it's only on the right hand side of the screen also, so it's definitely a defect. On mine anyway.
Click to expand...
Click to collapse
Yeah...mine is mostly on the right side into the center. Center to the left, it gets really hard to do it.
it's easier on the right side than the left on mine too but i still kinda have to push a bit. if you push in on the back panel on the right side it does it too.
I don't have a G2X yet, but I wonder if an owner who has some LCD bleed might want to try this out and report any results.
Screen bleed is a pretty common problem across LCD's. I don't think it's so much of a manufacturing defect as it is due to shifting during transport etc. All that has to happen is a corner of the screen gets too far or too close to the back light behind it. The screens tend to shift around a bit in their casing.
A common fix on regular LCD monitors is to massage the area of the bleed with medium or firm pressure. This can move the screen enough to reduce bleed.
Not sure if this would work on a glass-surface device like the G2X but it's probably worth a shot. Also try massaging with pressure *behind* the phone, not just on the front glass.
Ipad 2 seems to be having some bleed issues as well, and some owners report that slight twisting of the entire device corner-to-corner can re-seat the screen in the proper position and reduce bleed. Be careful with this one, but again, might be worth a shot to apply some twisting pressure.
Not recommending that anyone does this who isn't comfortable and ok with the possible consequences! But... as I live in Canada and want a G2X, it would be a lot easier to know that this sort of thing might fix the bleed than it would be to attempt returning it to the USA or an ebay reseller.
Please keep the "ARE YOU CRAZY?!" replies to a minimum... if you don't want to do it then simply don't do it.
dasbin said:
I don't have a G2X yet, but I wonder if an owner who has some LCD bleed might want to try this out and report any results.
Screen bleed is a pretty common problem across LCD's. I don't think it's so much of a manufacturing defect as it is due to shifting during transport etc. All that has to happen is a corner of the screen gets too far or too close to the back light behind it. The screens tend to shift around a bit in their casing.
A common fix on regular LCD monitors is to massage the area of the bleed with medium or firm pressure. This can move the screen enough to reduce bleed.
Not sure if this would work on a glass-surface device like the G2X but it's probably worth a shot. Also try massaging with pressure *behind* the phone, not just on the front glass.
Ipad 2 seems to be having some bleed issues as well, and some owners report that slight twisting of the entire device corner-to-corner can re-seat the screen in the proper position and reduce bleed. Be careful with this one, but again, might be worth a shot to apply some twisting pressure.
Not recommending that anyone does this who isn't comfortable and ok with the possible consequences! But... as I live in Canada and want a G2X, it would be a lot easier to know that this sort of thing might fix the bleed than it would be to attempt returning it to the USA or an ebay reseller.
Please keep the "ARE YOU CRAZY?!" replies to a minimum... if you don't want to do it then simply don't do it.
Click to expand...
Click to collapse
I just tried and I will say that the places that I had it originally did not get fixed or seem to be any dimmer than before which would have been nice... My bleeding is not that bad anyway...
However, the first time i twisted the phone a bit i noticed some more bleeding in the upper left of my phone (portrait directional) before i twisted it back to normal...
Good idea, but i would not recommend anything until we have some concrete evidence of it really working to fix ORIGINAL problems
lol this is not a fix and NEVER was a fix... you cant "massage" a LCD tv.... and a phone is no different gorilla glass or not it will NOT reset the screen.... good attempt at trying to find a solution but the bleeding isnt from the screen being out of place... its from poor manufacturing...
some bleeding is expected with LCD technology ... but not as bad as ive seen on some peoples ..... let alone on a 4" screen... but w/e if you have full brightness and are in a dark room then you must be blind.....
I wouldn't do it because you have to disassemble and it may void the warranty; in addition, you may break the LCD if you apply too much force.
If the bleeding/backlight leak is bad, just send it back and exchange.
nate420 said:
lol this is not a fix and NEVER was a fix... you cant "massage" a LCD tv....
Click to expand...
Click to collapse
Yes, you can. I fixed all bleed from my Acer 26" lcd by doing exactly this. I could see and feel the panel noticeably creaking back as I did it.
dasbin said:
Yes, you can. I fixed all bleed from my Acer 26" lcd by doing exactly this. I could see and feel the panel noticeably creaking back as I did it.
Click to expand...
Click to collapse
I've done the same, actually.
It made it a lot worse on mine. Good, though, as I plan to exchange it.
Profondo_Rosso said:
I've done the same, actually.
Click to expand...
Click to collapse
well i never herd of "massaging" a tv to fix it but i wouldnt do it to my 52" samsung cuz the manual states DO NOT PUSH FIRMLY ON SCREEN WHEN CLEANING so i dunno how it would work without taking it apart and "pushing the screen" back to the right spot...
let alone i got a 3 year warranty from best buy on it.. and if i crack it open AT ALL it voids so no thanks if anyone does this and it works on a phone i will be awed....
AND you shouldnt have to push the screen on ANYTHING to fix it... it should come correctly assembled in the first place....
just my .02 tho
I actually did fix my girlfriends bleeding with some massaging....Worked for me..
alnova1 said:
I actually did fix my girlfriends bleeding with some massaging....Worked for me..
Click to expand...
Click to collapse
what you did there. . .
I tried the massage but it doesn't work. I have very bad light bleeding from the top corners, and if I squeeze hard enough on top and bottom of the phone, it's a little better, but as I release my hands, everything goes back to normal, very bad looking darks colors. I'm exchanging it.
When my LCD screen started bleeding, I just put a bandaid on it
Asus bleeding
dasbin said:
Yes, you can. I fixed all bleed from my Acer 26" lcd by doing exactly this. I could see and feel the panel noticeably creaking back as I did it.
Click to expand...
Click to collapse
I have heard of this a lot. Massaging the LCD. I too am looking to fix a laptop screen. I heard before to massage the back of it, what side did you do? No one here who was successful mentioned if they did it to the front or back so I figured I'll do as you did? Thanks any help much appreciated!
My iPhone 5 is bleeding, pushed on it gently and it only made the black blotch spread. I don't recommend this
I don't think it is ROM related so I how this is the right place to post. I noticed last night while reading using the kindle app my screen was smudged. I used my cleaning cloth and noticed a darkish smudge under the glass. I wiped a bit more and it would not go away. I pressed the home button and went back to my book and it was gone. I experimented and found it happens on a white screen with moderate to light pressure but when i change the screen it goes away. Has any one else encountered this our did I ruin my screen somehow. I'm pretty careful with it either storing it connected to the dock and/or in my padded sleeve I bought for it. In case it matters, I'm on the latest and greatest CROMI w/ 240 DPI US. Thanks everyone. If more details are needed I have no problem providing. I don't make a lot of posts like this so I hope I was descriptive enough and followed all protocols. I don't believe it was dropped or mishandled.
Sent from my SPH-L710 using xda app-developers app
I saw a similar effect once, but only with more than light pressure when cleaning. After this scary experience I am now extra careful not to press too hard when cleaning the display.
You mean the blotches that appear when you press any screen apart from the old TFT's?
ShadowLea said:
You mean the blotches that appear when you press any screen apart from the old TFT's?
Click to expand...
Click to collapse
Those usually go away automatically after a second or so. This effect goes only away by a content change, which was previously unknown to me.
_that said:
Those usually go away automatically after a second or so. This effect goes only away by a content change, which was previously unknown to me.
Click to expand...
Click to collapse
That is certainly odd. I can see this hapening on an E-Ink device, but not an LCD
I've seen this too -- it looks a bit like there a drop of liquid under the glass of the display. The first time I saw it was when cleaning the screen and not keeping to the instructions, spraying some cleaning stuff right onto the display. No need to elaborate on the shock. I do not worry too much about it, though. It would be prudent, obviously, to take care when pressing on the screen -- you do not need to press that hard, anyway.
So i just got my hands on a MotoG3 and wanted to ask you guys if there any sort of ripple/discoloration effec that you notice on the screen if you press the screen a little hard? Not very hard but more than a slight touch. I see small ripples around the area where I press on the screen. Is it normal?
Definitely not normal. Might be an issue with the glass and glue on top of your display.
nkay08 said:
Definitely not normal. Might be an issue with the glass and glue on top of your display.
Click to expand...
Click to collapse
If you press right in the middle of the screen, what do you see? A little more than average pressure.
Its like when you touch the screen of your laptop. The distortion in the LCD display.
makes me wonder if the screen was left out in the sun. You could take a chance and try to get an OEM lcd/digitizer on fleabay - just make sure it says oem. Also google for motorola g3 teardown and read them all.
I have the same thing on my device since day one. It hasn't got any worse or better and it is present only in one place - a liitle above the center to the right.
Does anyone have screen bleed issues? I'm having a tough time identifying if there are any. Can someone post pictures for reference?
kakatorres1999 said:
Does anyone have screen bleed issues? I'm having a tough time identifying if there are any. Can someone post pictures for reference?
Click to expand...
Click to collapse
No I don't have any screen bleeding issue.
But if you aren't sure use an all blck wallpaper and if you see whitish tone near the edges your screen is bleeding.
BlurryXFace said:
No I don't have any screen bleeding issue.
But if you aren't sure use an all blck wallpaper and if you see whitish tone near the edges your screen is bleeding.
Click to expand...
Click to collapse
Perhaps a white wallpaper would show any particular screen bleeding than black wallpaper.
I dont need to post pictures, there is rather noticeable bleeding all around the display when using dark wallpaper when brightness is set to more rhan 50% (indoor usage). Especially on top and bottom edge of the display.
1375965485501144093271341 said:
I dont need to post pictures, there is rather noticeable bleeding all around the display when using dark wallpaper when brightness is set to more rhan 50% (indoor usage). Especially on top and bottom edge of the display.
Click to expand...
Click to collapse
You don't need to, sir/ma'am, but it'll help a lot if you did.
Sorry sir/ma'am, but i have nothing to take pictures with
1375965485501144093271341 said:
Sorry sir/ma'am, but i have nothing to take pictures with
Click to expand...
Click to collapse
That's unfortunate sir/ma'am but I guess it can't be helped.
You are quite correct sir/ma'am, it is unfortunate. I am, however, sorry that i could not be of any help to you regarding this matter.
1375965485501144093271341 said:
You are quite correct sir/ma'am, it is unfortunate. I am, however, sorry that i could not be of any help to you regarding this matter.
Click to expand...
Click to collapse
You need not apologize sir/ma'am, it's not your fault to begin with.
I am facing an issue that is I am getting a vertical line in the above center of the screen which is only seen when i turn off the screen. It isn't a scratch but it feels like the display is burned or something. I don't know why it is happening. I have cleaned the device but that is not getting rid of it. I am thinking to go to service centre to get a replacement or something. Btw i play pubg alot, maybe it is the reason. But this should not a good sign of every RN7Pro customer !
modit5 said:
I am facing an issue that is I am getting a vertical line in the above center of the screen which is only seen when i turn off the screen. It isn't a scratch but it feels like the display is burned or something. I don't know why it is happening. I have cleaned the device but that is not getting rid of it. I am thinking to go to service centre to get a replacement or something. Btw i play pubg alot, maybe it is the reason. But this should not a good sign of every RN7Pro customer !
Click to expand...
Click to collapse
These are some pictures of this i don't know correct word "screen bleed,Screenburn"
And it's definitely not a scratch !!!!
modit5 said:
These are some pictures of this i don't know correct word "screen bleed,Screenburn"
And it's definitely not a scratch !!!!
Click to expand...
Click to collapse
That's new to me and is quite strange to see. Doesn't look like screen bleed or burn though. Do get it checked at the service centre, and, if possible, enquire from them as to what caused it and keep us updated. Also, playing pubg shouldn't have such drastic effects on a device.
kakatorres1999 said:
That's new to me and is quite strange to see. Doesn't look like screen bleed or burn though. Do get it checked at the service centre, and, if possible, enquire from them as to what caused it and keep us updated. Also, playing pubg shouldn't have such drastic effects on a device.
Click to expand...
Click to collapse
Yeah it's really strange!
I don't know if i will get replacement or what coz i bought this 20 days ago.
Let's see what happen.
I've had a similar issue on my old phone. Either you have been cleaning your screen too much (so much that you have "cleaned" away a part of the oleophobic coating) or you have been playing games too much (sliding your finger along the same part of the screen and your sweat dissolved the oleophobic coating little by little). Try placing a couple of water drops on that part of the screen and also on different part of the screen (where there is no "smudge" ). You'll see a difference in the water drop shape. As far as i know, there is no way to restore factory applied oleophobic coating to its original condition.
1375965485501144093271341 said:
I've had a similar issue on my old phone. Either you have been cleaning your screen too much (so much that you have "cleaned" away a part of the oleophobic coating) or you have been playing games too much (sliding your finger along the same part of the screen and your sweat dissolved the oleophobic coating little by little). Try placing a couple of water drops on that part of the screen and also on different part of the screen (where there is no "smudge" ). You'll see a difference in the water drop shape. As far as i know, there is no way to restore factory applied oleophobic coating to its original condition.
Click to expand...
Click to collapse
I quite agree with you 2nd point of playing game that is pubg as I already mentioned and as you said "sliding your fingers along same part of the screen" Yes, this could be the reason as the joystick is on the left and it's always sliding there and as the device gets heated I get sweat on my thumb. But I have been playing pubg on my recent Note 5 Pro, I never got any sort of smudge. By the way it's not a cheap phone as it has best specs. But I did not expect this issue and yes I have cleaned with water but it's now permanent. I am little worried about the phone as I will go to the service center today to get replacement or whatever they will say. I will let you all know what will be the result.
Unfortunately, no oleophobic coating is perfect as it will wear off every device/surface over time. It depends on how one uses his/hers phone. I can only speculate that since RN5P and RN7P have different screen materials, the oleophobic coating will perform differently on each device. There are also other factors at play. I hope the service centre will give you a replacement unit, but this case scenario falls under "normal wear and tear" category which is, to my knowledge, not considered as a device defect. Anyway, there are some products out there that claim to restore/reapply the oleophobic coating of a screen, but i really doubt their efficacy. I guess you have nothing to loose if you wish to try some out, but even if they work, their efficacy will not be near as good as a factory applied coating. Good luck.
1375965485501144093271341 said:
Unfortunately, no oleophobic coating is perfect as it will wear off every device/surface over time. It depends on how one uses his/hers phone. I can only speculate that since RN5P and RN7P have different screen materials, the oleophobic coating will perform differently on each device. There are also other factors at play. I hope the service centre will give you a replacement unit, but this case scenario falls under "normal wear and tear" category which is, to my knowledge, not considered as a device defect. Anyway, there are some products out there that claim to restore/reapply the oleophobic coating of a screen, but i really doubt their efficacy. I guess you have nothing to loose if you wish to try some out, but even if they work, their efficacy will not be near as good as a factory applied coating. Good luck.
Click to expand...
Click to collapse
Unfortunately, service center only said that this is the first time that this problem we have faced and said you can only get the new lcd panel inspite of replacing the device.
So now I have to replace the lcd panel and have to wait for 7-10 days with submitting my phone to the service center! Without submitting the device they will not replace the lcd which is sad.
modit5 said:
I am facing an issue that is I am getting a vertical line in the above center of the screen which is only seen when i turn off the screen. It isn't a scratch but it feels like the display is burned or something. I don't know why it is happening. I have cleaned the device but that is not getting rid of it. I am thinking to go to service centre to get a replacement or something. Btw i play pubg alot, maybe it is the reason. But this should not a good sign of every RN7Pro customer !
Click to expand...
Click to collapse
Playing PUBG a lot doesn't cause screen bleeding, lol. You might have physically damaged the phone consciously or not knowingly.
AbhiAbhiBisht said:
Playing PUBG a lot doesn't cause screen bleeding, lol. You might have physically damaged the phone consciously or not knowingly.
Click to expand...
Click to collapse
I respect you answer!
But do you know that I have been using this device since 25 days, thereafter, my device had not felt even once.
Secondly, I use this device with cover that is provided in the mi store worth 349 which is very safe and good cover.
Fortunately, the device was all good when I opened the box and there was no spot, but I have noticed that spot after 15 to 20 days.
I thought that is is nothing just a smudge which can be cleared with a cloth but it doesn't get rid of it.
If I damaged the Device physically then a scratch must be there on the screen where there is a spot, so there is not even a single scratch. By the way if I have damaged it myself then I have to mention that thing in the thread, as I mentioned playing PUBG, because I had a doubt that when I play PUBG daily 3-4 hours the device is heated a lot above the center portion and the place where the spot is as same as the joystick of pubg which is used continuously ! Lastly I had no screen guard on the screen !
modit5 said:
I respect you answer!
But do you know that I have been using this device since 25 days, thereafter, my device had not felt even once.
Secondly, I use this device with cover that is provided in the mi store worth 349 which is very safe and good cover.
Fortunately, the device was all good when I opened the box and there was no spot, but I have noticed that spot after 15 to 20 days.
I thought that is is nothing just a smudge which can be cleared with a cloth but it doesn't get rid of it.
If I damaged the Device physically then a scratch must be there on the screen where there is a spot, so there is not even a single scratch. By the way if I have damaged it myself then I have to mention that thing in the thread, as I mentioned playing PUBG, because I had a doubt that when I play PUBG daily 3-4 hours the device is heated a lot above the center portion and the place where the spot is as same as the joystick of pubg which is used continuously ! Lastly I had no screen guard on the screen !
Click to expand...
Click to collapse
Can you provide some photos so we can help you better