Database Info

[HOWTO] Say bye bye to sticky bit fastboot ^^

I figured i would post this thread on how to get rid of sticky bit fastboot So far this should work on any android powered phone..
So i was searching around and couldnt find actual answers on how to get rid of that annoying ass sticky bit factory fastboot menu when phone powers up. So i decided to take matter in my own hands and learn a little bit about adb and fastboot commands etc.. Typed in some commands in a certain order and BOOM sticky bit no longer gets in the f-ing way ^^ this should work on any android powered phone seeing how it doesnt go to any specific phone. So far i learned that it works on the xpirea (how ever you spell it) and the droid razr m consumer and dev edition. so here we go.
MAKE SURE YOU HAVE USB DEBUGGING ENABLED
Files to download:
Android.zip: http://www.mediafire...0imf9xv2uicwkbh
Latest usb drivers: http://www.motorola....motodev_lp.html
STEPS
1. Power up your phone completely.
2. extract the folder in the android.zip file to your local disk. just drag the folder to local C: or whatever your main HD is
3. hold left shift and right click on the folder and click on pen command window here"
4. plug in your phone if you havnt done so already
5. in the command window type: adb devices ( this makes sure your phone is connected and it'll show its serial number under List of devices attached.
6. once it shows the serial number type in these commands ( these are in order)
adb reboot bootloader
fastboot oem fb_mode_set
fastboot oem fb_mode_clear
fastboot erase userdata
fastboot erase cache
fastboot reboot
and walla phone will reboot like when you first got it ^^
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

CWM 7.5.0.4 ( M_A_H ) Rebuilding version

Hy everybody :laugh:
Whats Features in CWM 7.0.5.4 (M_A_H) version:​
* cyan colors are stunning
* cwm can kill instantly without reboot
* cleanup tab option: shortcut to try to fix forcequits after updates, return to recovery and select on the main screen (Wipes Cache, dalvik, and fixes permissions)
* Standard options to backup and restore to either the SD card or internal storage
* Mount points match those of most running roms
* adb shell works as root (with or without system mounted)
* set boot mode menu to select the boot partition (hidden on know non-multiboot bootloaders)
* setbootmode and itsmagic command line tools for advanced users
* /data/linux directory is not deleted on erase userdata, nor backed up on nandroid backup (just like /data/media) to allow a space for linux files for dual boot and chroot linux installes.
Requirements:​
1. Rooted Android Device.
2. Available SuperUser
How to install CWM on Xperia neo L:​
1. Download Tool : Install CWM for Xperia neo L from below.
2. Enable USB Debugging On your Smart Phone.
3. ADB(Android Debugging Bridge) Drivers should be installed on your PC.
4. Extract files of the Tool to the PC and run the file named ("install-cwm1.cmd").
5. Connect the Xperia neo L (in switch-off mode) by pressing (Back key) to the PC.
6. Follow the instructions given when you open the file mentioned above.
7. When finished Reboot your phone.
8. DONE!
9. To get into CWM recovery menu,at boot time immediately repeatedly press the Volume Down to go to the CWM menu.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
:good::good::good::good::good::good::good::good::good::good::good::good:

thx

[Root Guide] Shanling M3X DAP

SAFTY INFORMATION: Whatever you do, its on your own responsibility. Your warranty might be void and there is the risk of bricking your device!​
So this is what I did:
Tools
Magisk-v25.2.apk
Latest M3X Firmware
ADB Tools
EDL.py
Click to expand...
Click to collapse
Extract the boot.img from M3X Firmware V1.62- Do not open, just copy.zip
Copy the Magisk-v25.2.apk and boot.img to your Shanling M3X
Install the Magisk-v25.2.apk
In Magisk press "Install" in the upper right corner
Spoiler
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
On "Method" select "Select and Patch a File" and choose your boot.img then press "Let's Go"
Spoiler
When Magisk is done, you can close the App and transfer the patched boot.img to your PC.
On your M3X, activate Developer Mode. Settings > About device > Tap multiple times on the Build number
In Developer Options, activate USB debugging
On your PC extract the platform-tools.zip and install EDL.py
Plug the M3X into your computer with a good USB cable. You may be promted to allow USB debugging on the M3X - check "Always allow from this computer" and OK
Open a Command/Terminal window and navigate to your platform-tools folder
Use following command
Code:
adb reboot edl
the display of your M3X will now turn black
In the Command/Terminal window navigate to your EDL.py installation
From now on you could brick your device, please advance only if you know what you are doing!
I would highly recommend to do a backup of everything with the commands mentioned on the EDL Github site​
14. Use following command to dump your stock boot.img
Code:
edl r boot boot.img
the stock boot.img will appear in your EDL folder, move to a safe space.
15. Now copy your Magisk patched boot.img into the EDL folder and run following command:
Code:
edl w boot boot.img
16. When EDL is done, you can disconnect your M3X. You might need to hold the powerbutton for 20-30 seconds until it leaves edl mode and starts booting.
17. Congratulations! You rooted your M3X
Further information: There seems to be a undocumented method using the tool "QFIL" but I dont know anything about it. Might ne worth a try.
Have fun

Thanks for this tutorial. Can you drop some screen shots and an overview of what you're able to change now that you're rooted.
I've been thinking of getting a HiBy R6. But it being on Android 9 is annoying. My guess is if I can get it rooted, that it's possible to update to a newer version of Android.

Hi, I’m trying to root my M3 Ultra with this method but I’m facing a problem.
On windows when trying to enter « edl r boot boot.img » it says me that « r » is not a command…
Any help would be really appreciated please
Thanks in advance for replying

[GUIDE] Flash ROMs On The Go (With Another Phone) (Without PC)

PREREQUISITES -
1. Two phones (one on which you want to flash rom/img, and other you'll use as host)(root is not required on host phone)
2. USB-C to USB-C cable, or USB-C to USB-A with OTG adaptor.
3. Some brain and patience.
PROCEDURE -
1. Install the app called "Bugjaeger" on an android phone you're going to use as host (root is not required)
2. Boot the phone to fastboot and connect the phone to host phone using USB-C to USB-C.
3. Open Bugjaeger app and go to the last tab.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. You'll see your device listed in the app, so select it from the list.
5. Thereafter press the bottom right blue button.
6. This will open up a terminal like interface, here type the command for flashing the boot img. Just type "fastboot flash boot" thereafter from the top, select the icon that looks like file attachment and select the boot img file.. No need to type the file location for file, it'll automatically be appended.
7.Press the button on the right and wait for the boot img to be flashed.
8. After it is done, boot to recovery, and select adb sideload option from recovery.
9. The phone should again be detected in the Bugjaeger app and be listed. Ensure its selected.
10. Now on the host phone, scroll to the bottom on the same tab to the last option that says "Pick file and perform sideload"
11. After selecting the ROM zip file, wait for it to be flashed, the progress will be displayed on the host phone, it will go till about 47% before the process is completed.
12. Reboot the phone and enjoy new ROM
CREDITS
All credit goes to the amazing developer @bugjaeger who developed this amazing app, allowing us to do such crazy things without the need of a computer.

Hello may you report the official download link?

sev7en said:
Hello may you report the official download link?
Click to expand...
Click to collapse
Bugjaeger Mobile ADB - USB OTG - Apps on Google Play
Tool to debug, dissect, shell into and control Android device or TV via USB/WiFi
play.google.com

How To Guide How To: Region Switch on Nord2T

Hello again everyone. This is a quick guide on how to change Regional firmware on our Nord2T device (ie going from CPH2399 to CPH2401)
I cannot be responsible if you brick your device. Your phone, your choices, your responsibility!​
Before we get started I would recommend unlocking the bootloader (unsure if this is a necessity but my device was unlocked at the time of trying so I would recommend users do the same)
1 - Unlock the bootloader (if you haven't done it already...beware that this will erase all of your user data). To do so, you must:
Enable developer options
Enable the "OEM unlocking" option
Enable USB debugging
Have both adb and fastboot, from SDK Platform Tools available on your PC
Connect your phone to your PC using the USB cable and run the following commands:
Code:
adb devices
(just to make sure that your phone is, in fact, recognized by your PC and that you're able to run adb commands)
Code:
adb reboot bootloader
(so your phone will reboot into fastboot mode)
Code:
fastboot flashing unlock
(device should now unlock)
Code:
fastboot reboot
(device reboots with an unlocked bootloader and data partition wiped)
2 - Download and Install Fastboot Enhance from HERE
3 - Download the IND rollback package from HERE
4 - Extract the rollback package zip to your PC (the only file you need once it is unzipped is payload.bin)
5 - Connect your device back to PC and reboot to fastboot yet again.
Code:
adb reboot fastboot
6 - Once in fastbootd open Fastboot Enhance on PC and you should see your device in the "Fastboot Visualization" tab.
Make sure to click on "Ignore unknown partitions" on the bottom of the screen. Then click on the "partitions" option and under partitions and delete every file that ends with "cow" refer to screenshot, just select and delete.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
7. Click on "Flash payload.bin" and browse for the payload.bin you extracted earlier.
8. Once flashed you can reboot (recommended to either factory reset from settings after the device restarts or wipe data in fastboot for a smoother experience.
This is only tested on a Global device using firmware version CPH2399_11_A.17 and flashing IND CPH2401_11_A.17 ROLLBACK PACKAGE!!
Subsequent updates will now be on the IND branch for your device also.
Hope this helps someone out!
If anyone has any questions/input/recommendations please feel free to discuss below and any issues we will help to resolve them.
Have a good day peeps