[Q] phone not being connected in odin - Samsung Galaxy SL i9003

I am using joode and luesityo's rom in my phone. But since two days i am not able to use my back button and menu button. Its unresponsive for two days and now. Im able to access and usb storage. Please help me. And please help me how can i fix any kies problem too.

You use CleanKPU rom like in my Sig? Are you sure your in XXKPU firmware? and wiped everything in recovery mode after installing the rom. Reinstall the Rom in CWM and then wipe. Make sure your in XXKPU first.

I have been using this ROM for over 3 weeks bro. but for past two days ,im not able to use my back button and menu button. its unresponsive. please help.

Have you tried changing kernel?

Related

I killed the phone! please help!!

HELPPPP!!! I FU**ed my SGS2!!!
I've flashed a lot of phones(the last one a year ago) but never with odin. The whole point is that I've rooted the phone, open odin (didnt know how to install the kernel) so I download CWM5. In the odin menus I've choose the CWM5 and click flash... I DONT KNOW WHY I DID THAT :S
Now the phone goes through the Samsung i9100 black and withe screen and then goes completly BLACK!
Any help please!!!!! I work with it! :'(
Mhz250 said:
HELPPPP!!! I FU**ed my SGS2!!!
I've flashed a lot of phones(the last one a year ago) but never with odin. The whole point is that I've rooted the phone, open odin (didnt know how to install the kernel) so I download CWM5. In the odin menus I've choose the CWM5 and click flash... I DONT KNOW WHY I DID THAT :S
Now the phone goes through the Samsung i9100 black and withe screen and then goes completly BLACK!
Any help please!!!!! I work with it! :'(
Click to expand...
Click to collapse
I did the same thing a few days ago. As long as you have your current rom downloaded on your computer you can put your phone in ODIN mode (power + vol down), start ODIN on computer, plug in phone. Once ODIN sees your phone click start. Since right now you can't see anything on your phone due to the kernel, redoing it will straighten you out.
I fixed mine this way and haven't messed with the kernel since.
Tappin' from my SGP 5.0
The thing is that I cant eter odin recovery mode
I have CWMR5.... I try with (vol up + power btn + central btn). And the CWMR5 is there.
Another thing is that I dont have a bootloader lower than lph
I cant install another rom
So.. I'm stuck here
any ideas??
simple!!!
well u can simply flash the rom to stock one by putting it in download mode and after that selecting the stock rom in the pda
after that u need root as well deoxidise the rom so that rom could be properly installed!!!
Maybe this will help:
http://androidflip.com/unbrick-samsung-android-phones-click-guide/
Thanks people!
I've finally placed a CM9 rom in the flash memory and installed it with google apps.
Clear cache
wipe data
clear davik(or something)
and reboot...
I've lost all my work postits but I got my phone back!
and with 4.0.4
Thanks guys!! all of you for your time answering!
I'm happy you got your phone working again!!!! I was crushed when I thought I killed mine too.
Sent from my SPH-D710 using Tapatalk 2

[Q] Having issues trying to get back to stock

Ive been using the thread to Odin back to stock as im getting a replacement phone in a few days. Followed everything correctly, but Ive been getting a boot loop between the green android guy and the white Samsung startup logos. Redid the process in odin and now im getting "firmware upgrade encountered an issue, please select recovery mode in Kies and try again" when I go to download mode. i know I have a saved Nandroid backup on my SDcard, I just cant get to it. I also have mini Kies installed on my computer if there is a way to fix it thru that. I cant figure out how to get into recovery mode either. If anyone can help it would be greatly appreciated! Im just trying to get my phone working until my replacement is here.
I did Odin again, but now im stuck in a boot loop between the greenm android guy and the white samsung startup screens.
itsLYNDZ said:
Ive been using the thread to Odin back to stock as im getting a replacement phone in a few days. Followed everything correctly, but Ive been getting a boot loop between the green android guy and the white Samsung startup logos. Redid the process in odin and now im getting "firmware upgrade encountered an issue, please select recovery mode in Kies and try again" when I go to download mode. i know I have a saved Nandroid backup on my SDcard, I just cant get to it. I also have mini Kies installed on my computer if there is a way to fix it thru that. I cant figure out how to get into recovery mode either. If anyone can help it would be greatly appreciated! Im just trying to get my phone working until my replacement is here.
I did Odin again, but now im stuck in a boot loop between the greenm android guy and the white samsung startup screens.
Click to expand...
Click to collapse
That's because you had to factory reset and erase all data before flashing to stock. I had the same issue when flashing from dk4 to stock to lf4
----------------------------------------------
If helped don't be afraid to hit the thanks button it doesn't bite lol
So how do I get my phone working again? Its stuck in a bootloop after following the directions for Odin back to stock thread
itsLYNDZ said:
Ive been using the thread to Odin back to stock as im getting a replacement phone in a few days. Followed everything correctly, but Ive been getting a boot loop between the green android guy and the white Samsung startup logos. Redid the process in odin and now im getting "firmware upgrade encountered an issue, please select recovery mode in Kies and try again" when I go to download mode. i know I have a saved Nandroid backup on my SDcard, I just cant get to it. I also have mini Kies installed on my computer if there is a way to fix it thru that. I cant figure out how to get into recovery mode either. If anyone can help it would be greatly appreciated! Im just trying to get my phone working until my replacement is here.
I did Odin again, but now im stuck in a boot loop between the greenm android guy and the white samsung startup screens.
Click to expand...
Click to collapse
This issue only occured when you uncheck Auto reboot in Odin. Try Odin again with Auto reboot checked
If you getting an boot loop, do exactly what I've done in Odin thread
If you get a boot loop All you do is boot in stock recovery and wipe data
Sent from my SGH-T769 using xda premium
snoopy1e11 said:
If you get a boot loop All you do is boot in stock recovery and wipe data
Sent from my SGH-T769 using xda premium
Click to expand...
Click to collapse
Can't go to stock recovery in this case. This issue only occoured when Odin to stock ROM after using/flashing custom ROM that you forgot to format system or clean data. I've run into this problem before
It looks like after all this, Titanium Backup's backup was erased. I do have a Nandroid saved on my SDcard. Is there a way to pull everything from that? When I go to CWM and try to do a Nandroid, it says there isnt anything there. But When I connect to my computer, I can see the saved backup. I have been able to pull a few backed up apps off the Nandroid backup, but only certain ones or it says batch restore failed. Im wonder how it can see the Nandroids, but CWM cant? They're saved on my SDcard.
Is there another way Titanium Backup saves backups that I could possibly get to them? Im really trying to figure this out before my replacement phone gets here in a few days. I did backup everything, Im just having a difficult time restoring after the numerous problems Ive had thanks to Tmobile's "troubleshooting"
What are you currently running? If you are back to stock titanium won't function correctly as you have to be rooted. But since you mentioned cwm I wasn't sure.
Sent from my SGH-T769 using Tapatalk 2
Im just on stock but I am rooted. I just dont know where all my backups went after the bootloop and issues with reverting to stock after Tmobilr screwed up my phone trying to figure out why I kept getting "Call Ended" when trying to dial out.
Where is your nandroid backup currently located?
Sent from my SGH-T769 using Tapatalk 2
On my external SDcard/clockwork mod/backup/ whatever the date was.
Seems normal. Not sure why it wouldn't be visible. Sorry I can't be more help.
Sent from my SGH-T769 using Tapatalk 2
In recovery they are visible, but when I go to flash one it says no files found..
I was also stuck in a boot loop after attempting to get my phone back to stock since I got a replacement phone. Followed all of the instructions, but realized although I did a factory reset, I forgot to wipe data. So I simply got CWM through Odin....got into recovery wiped data....rebooted and voila! I'm back to stock no root. It took all of 1 minute to do. Maybe that will work for you too
samsung s blaze stuck !!!!!!
please help,i need to get my Samsung s blaze to recovery mode, i already rooted and updated to Cm 10 11 19 nightly and i try to go back to stock rom from using the Odin but i backed up my cm rom,after flashing the stock ROM my phone try to reboot but got stuck at the Samsung logo after the android logo..i tried to get to recovery mode by pressing volume up +home button plus power at the same time but it wont,please your help will be much appreciated,
rashcapone said:
please help,i need to get my Samsung s blaze to recovery mode, i already rooted and updated to Cm 10 11 19 nightly and i try to go back to stock rom from using the Odin but i backed up my cm rom,after flashing the stock ROM my phone try to reboot but got stuck at the Samsung logo after the android logo..i tried to get to recovery mode by pressing volume up +home button plus power at the same time but it wont,please your help will be much appreciated,
Click to expand...
Click to collapse
You gotta search bro all you have to do is flash cwm then reboot to recovery and do a factory reset
----------------------------------------------
If helped don't be afraid to hit the thanks button it doesn't bite lol
Thank you for your quick response.I am able to get to recovery mode.and wipe data and factory reset.I got cm10 1117 nightly on my SD card and I install that and my phone is back.then I install jelly bean Google app.I will never try to go back to stock ROM again. this ROM is cm10 1117 nightly is better than stable cm10 for me.I thank all the devs who worked together to bring this your effort is much appreciated.
This is how I get to recovery mode on my Samsung galaxy s blaze.
1.press the vol up + vol down + power button at the same time.
2.as soon as the Samsung logo light up I release power + vol down button but not releasing releasing vol up button but rather press it harder..and there it comes....may be someone might be having the difficulty I had before
Give it a try...
Sent from my SAMSUNG-SGH-T769 using xda app-developers app

Weird Softbrick/Bootlooping!

Hey guys, I need your help.
My phone was all ok when I slept last night! (I have Purumod v3) I wake up in the morning and the phone was off. when I switched it on,it started bootlooping!(shows only samsung logo)
I tried reflashing it,but the bootlooping seems to persist EVEN when im trying to use the recovery(after the flash when I need to wipe data).If I go to recovery,just when Im about to reach the "wipe all data",it switches off and reboots. I thought its a hardware problem but there is one thing that goes against it ie., the phone does NOT show this behaviour when its in Download mode. when Im in download mode,it doesnt reboot or switch off or anything.
I tried going back to stock(a froyo rom without bootloader) but problem still remains. Tried flashing many different custom roms,still remains the same.
Any idea? Reinstalled Kies drivers and everything. Please help.
Have you tried flashing another kernel or reflashing your current one?
Since the kernel handles boot and recovery while download mode is on a lower level.
myozeus said:
Hey guys, I need your help.
My phone was all ok when I slept last night! (I have Purumod v3) I wake up in the morning and the phone was off. when I switched it on,it started bootlooping!(shows only samsung logo)
I tried reflashing it,but the bootlooping seems to persist EVEN when im trying to use the recovery(after the flash when I need to wipe data).If I go to recovery,just when Im about to reach the "wipe all data",it switches off and reboots. I thought its a hardware problem but there is one thing that goes against it ie., the phone does NOT show this behaviour when its in Download mode. when Im in download mode,it doesnt reboot or switch off or anything.
I tried going back to stock(a froyo rom without bootloader) but problem still remains. Tried flashing many different custom roms,still remains the same.
Any idea? Reinstalled Kies drivers and everything. Please help.
Click to expand...
Click to collapse
Try to find something called "zero fill tar" I think Hillbeast made? its like a deep cleanser, if it is a firmware issue, this should help. flash it then flash any rom over it.
Try flashing this tar file. It's saved my phone many times and here is the file that ava.tar is talking about. For the second file, you have to extract it and you get a .tar file that you flash through odin. :good:
I tried each of the things in your replies. I tried the 0kb file,did nothing,tried the zero fill followed by flashing Kyrillos Rom (froyo) still the same result(bootloop). Also flashed g3mod 2.4.1! this is just so annoying. Thanks so much for your help. I really hope my I could find a way.
Try flashing a rom with 'force upload mode' [vol up+home and power up]
Sent from my GT-I5800 using xda premium
myozeus said:
I tried each of the things in your replies. I tried the 0kb file,did nothing,tried the zero fill followed by flashing Kyrillos Rom (froyo) still the same result(bootloop). Also flashed g3mod 2.4.1! this is just so annoying. Thanks so much for your help. I really hope my I could find a way.
Click to expand...
Click to collapse
Try flashing the tar after flashing the rom, ie. flash it last
Hey guys,
I tried flashing in upload mode,doesnt make a difference.nor does flashing the zero fill tar AFTER flashing the rom!
Im sorry if Im being annoying but I'll try any options I can get!
Thanks again
myozeus said:
Hey guys,
I tried flashing in upload mode,doesnt make a difference.nor does flashing the zero fill tar AFTER flashing the rom!
Im sorry if Im being annoying but I'll try any options I can get!
Thanks again
Click to expand...
Click to collapse
Some more suggestions, which are not very likely (not in order of probability of success but in order of quickness), but it doesnt hurt to try
1. Try booting/ entering recivery while charging
2. Try removing sd card (and then sim card as well) then booting
3. Try flashing a stock rom (then try doing a factory reset from stock recovery)
4. If you know somebody with the same phone try using their battery and then booting.
(5. When you lose all hope try the russian/old school methdod, ie. beat it into complying to your wishes )
boot loop causes and hw to work around
hey
boot loops are a cause of ur kernal not working properly.....,try downloading a working kernal through odin........even i had boot loop problems with g3mod kernal.......but the ultra oc kernal 1260hr kernal works fine fr me........also try clearing the dalvik cache or cache partition..,..which usually solves stability problems nd its a must after flashing a kernal.......try flashing marcellusbe 7.2 rom.....which is very much stable u can also find a bunch of kêrnals try nt using the g3 mod kernal.... if all these dosent work take ur mob to the service center they wont flash it as u rooted ur mob bt they will suggest u to get new motherboard get it done and then u can start frm the beginning .......
HIT THE THANKS BUTTON IF HELPED DONT JUST SAU THANX

[Q] Is it bricked? I don't think so... but...

So what I did was install teamwin's recovery. I installed a custom rom on it before and all... then I wiped it when I was trying to give it to my friend. Now it doesn't wanna work.
I always press the up, down power and even just up and power or down and power and it always goes to the Samsung S 4G screen and blacks out and restarts. I have no idea why or what its doing... but I need help getting it working again please!
What did you install?
What did you install over?
It sounds like you've wiped it so there is no data of value on it, correct? If so, one of the Heimdal one-clicks should get you back to a bootable state.
I installed just the recovery. It was working fine before though. When I got a rom it stopped working... maybe a button is broken?
It was RemixICS or something. I tried to install it again... and it always failed. Then I got another downlooad and now it doesn't even want to go to the recovery.
I'll download that... thanks.
I haven't had much luck "injecting" TWRP. If the ROM you want to use doesn't come with TWRP, another approach would be to flash Hefe Kernel which has TWRP over the ROM.
I think the recovery is gone. I will have to reflash it with ODIN.
I only get a spinning icon whenever I try to plug it in for Download/Odin and I have no idea what to do! It doesn't move either, it just stays there.
Jeff answered you in the second post.

[Q] Brick forever or possibility to restore?

Good evening everyone.
I bought Samsung galaxy tab 7.7 GT-P6800 about month ago. It's been working fine, till this saturday. When i tried to unlock my Tab, device didn't respond. I tried to power it on, but still no response. Hm, the reason of this thing is only one - too low battery. So, i putted my device on charge (saw battery icon on screen). After 2 hours, I came back and tried to power my device again, but it freezed with this battery icon. I hold power button for 10-15 seconds and my device started to load, but it got freezed on "Samsung Galaxy Tab 7.7". My Tab is rooted, but firmware is official.
What my DEVICE CAN'T DO:
* Can't load into CWM (freezing at "Samsung Galaxy Tab 7.7";
* Can't Power on;
* Can't charge;
* Can't connect to PC.
What my DEVICE CAN DO:
* Load into Downloading mode.
Is it possible to restore my Tab? If yes, how to do it, using Downloading mode (Kies doesn't see my tab)? Please help.
Thanks for your help.
Mrakoris/ said:
Good evening everyone.
I bought Samsung galaxy tab 7.7 GT-P6800 about month ago. It's been working fine, till this saturday. When i tried to unlock my Tab, device didn't respond. I tried to power it on, but still no response. Hm, the reason of this thing is only one - too low battery. So, i putted my device on charge (saw battery icon on screen). After 2 hours, I came back and tried to power my device again, but it freezed with this battery icon. I hold power button for 10-15 seconds and my device started to load, but it got freezed on "Samsung Galaxy Tab 7.7". My Tab is rooted, but firmware is official.
What my DEVICE CAN'T DO:
* Can't load into CWM (freezing at "Samsung Galaxy Tab 7.7";
* Can't Power on;
* Can't charge;
* Can't connect to PC.
What my DEVICE CAN DO:
* Load into Downloading mode.
Is it possible to restore my Tab? If yes, how to do it, using Downloading mode (Kies doesn't see my tab)? Please help.
Thanks for your help.
Click to expand...
Click to collapse
You can flash new rom via pc odin if you can go to download mode. I would suggest go over this thread first http://forum.xda-developers.com/showthread.php?t=1469635
cakrabayu said:
You can flash new rom via pc odin if you can go to download mode. I would suggest go over this thread first http://forum.xda-developers.com/showthread.php?t=1469635
Click to expand...
Click to collapse
Thanks.
I restored my Tab to original firmware, but still freezing at "Samsung Galaxy tab 7.7".
Mrakoris/ said:
Thanks.
I restored my Tab to original firmware, but still freezing at "Samsung Galaxy tab 7.7".
Click to expand...
Click to collapse
I feel sorry about that. Do you clean install your ROM? If you can now go to CWM Recovery, then it would be good. You can try factory reset in CWM.
I had the same issue this is when the flashed Rom is damaged.You need to install the originap Samsung Rom which can be bought from samsung or give your tab to a repair shop they will have the neccery things.
Sent from my GT-N7100 using xda app-developers app
you need to make factory reset using cwm recovery... If you reinstall the Official Honeycomb firmware... you are safe to wipe using the stock 3e recovery... if you are on ICS... please go to download mode and install cwm... then factory reset...
edan1979 said:
you need to make factory reset using cwm recovery... If you reinstall the Official Honeycomb firmware... you are safe to wipe using the stock 3e recovery... if you are on ICS... please go to download mode and install cwm... then factory reset...
Click to expand...
Click to collapse
Hey,
Thanks for your reply!
I flashed my SGT 7.7 back to Official Honeycomb firmware, but i still can't access recovery mode. The only thing i can do is - load into download mode. I can't install CWM, because i flashed it to NON rooted Official firmware. It's still like a brick
Any other suggestions?
Thanks!
how did you try to enter the recovery mode? what key combination that you press...
Mrakoris/ said:
Hey,
Thanks for your reply!
I flashed my SGT 7.7 back to Official Honeycomb firmware, but i still can't access recovery mode. The only thing i can do is - load into download mode. I can't install CWM, because i flashed it to NON rooted Official firmware. It's still like a brick
Any other suggestions?
Thanks!
Click to expand...
Click to collapse
Isnt it possible to flash CWM without rooting first??
If I remember correctly.... Go into download mode... using Odin and flash CWM....
if you get that..... then try to re=boot into recovery and wipe away if your on HC...
good luck
edan1979 said:
how did you try to enter the recovery mode? what key combination that you press...
Click to expand...
Click to collapse
Power + Volume Up buttons.
jimmbomb said:
Isnt it possible to flash CWM without rooting first??
If I remember correctly.... Go into download mode... using Odin and flash CWM....
if you get that..... then try to re=boot into recovery and wipe away if your on HC...
good luck
Click to expand...
Click to collapse
Flashed CWM using Odin, but still can't access anything. I can only see two loading screens:
1. Freezing battery icon. (it happens, when i try to charge my tablet)
2. Freezing Samsung Galaxy Tab 7.7 sign.(it happens, when i just try to power my device on)
The only way I can power off my tablet is to wait untill my device's battery discharges.
I'm in the same situation:
1. Freezing battery icon. (it happens, when i try to charge my tablet)
2. Freezing Samsung Galaxy Tab 7.7 sign.(it happens, when i just try to power my device on)
Although I can boot into CWM 5.0.2.7 but I'm unable to successfully get a rom to work...
Very frustrating isn't it.
I'm thinking about trying this...
http://forum.xda-developers.com/showthread.php?t=1667886
ianmere said:
I'm in the same situation:
1. Freezing battery icon. (it happens, when i try to charge my tablet)
2. Freezing Samsung Galaxy Tab 7.7 sign.(it happens, when i just try to power my device on)
Although I can boot into CWM 5.0.2.7 but I'm unable to successfully get a rom to work...
Very frustrating isn't it.
I'm thinking about trying this...
http://forum.xda-developers.com/showthread.php?t=1667886
Click to expand...
Click to collapse
Heh, that's true. If anything will help you to make your device alive again, please tell me. Because I really have no idea what to do. Tried everything...
Thanks.
Mrakoris/ said:
Heh, that's true. If anything will help you to make your device alive again, please tell me. Because I really have no idea what to do. Tried everything...
Thanks.
Click to expand...
Click to collapse
OK, I went through the following guide
http://forum.xda-developers.com/showthread.php?t=1862294
And it really worked!!! it takes a while, you will need to put aside around 1-2 hours to go through it carefully step by step.
I flashed CWM using odin first.
ianmere said:
OK, I went through the following guide
http://forum.xda-developers.com/showthread.php?t=1862294
And it really worked!!! it takes a while, you will need to put aside around 1-2 hours to go through it carefully step by step.
I flashed CWM using odin first.
Click to expand...
Click to collapse
What firmware were you using on your tablet, while you were flashing CWM? Why I am asking it, is because i tried lots of different firmwares to install CWM and i couldn't boot into CWM niether with honeycomb, nor with ICS. And yeah thanks for your help.
Mrakoris/ said:
What firmware were you using on your tablet, while you were flashing CWM? Why I am asking it, is because i tried lots of different firmwares to install CWM and i couldn't boot into CWM niether with honeycomb, nor with ICS. And yeah thanks for your help.
Click to expand...
Click to collapse
I started with ICS stock but after my initial flash did't work I believe I wasn't really running any rom because it didn't work.
I then went into Odin/download mode (holding volume down and power).
once in I used the cwm-6.0.2.3-p6800.tar file and loaded it under "Bootloader" then I flashed that successfully.
to then get into recovery I hold Volume up + power (for a very long time about 20secs).
Once in recovery then you can begin the above guide to repair the sdcard.
Hope that helps.
Thanks again for your reply.
I did exactly everything you wrote, even installed original ICS firmware again using Odin. Flashed recovery, hold Power + Vol Up buttons for like 5 minutes, but f*** this, still didn't boot into recovery. Erh.. my device is broken forever.. No solution for all this..
Mrakoris/ said:
What my DEVICE CAN'T DO:
* Can't load into CWM (freezing at "Samsung Galaxy Tab 7.7";
* Can't Power on;
* Can't charge;
* Can't connect to PC.
What my DEVICE CAN DO:
* Load into Downloading mode.
Click to expand...
Click to collapse
I'm in the same situation as Mrakoris, expect that I was in CM 10 and flashed to CM 10.1 before I got a brick.
cakrabayu said:
You can flash new rom via pc odin if you can go to download mode. I would suggest go over this thread first http://forum.xda-developers.com/showthread.php?t=1469635
Click to expand...
Click to collapse
I had a look at that topic but I'd rather try to get to CWM first just to wipe data/cache partitions.
Mrakoris/ said:
Flashed CWM using Odin, but still can't access anything. I can only see two loading screens:
1. Freezing battery icon. (it happens, when i try to charge my tablet)
2. Freezing Samsung Galaxy Tab 7.7 sign.(it happens, when i just try to power my device on)
The only way I can power off my tablet is to wait untill my device's battery discharges.
Click to expand...
Click to collapse
ianmere said:
OK, I went through the following guide
http://forum.xda-developers.com/showthread.php?t=1862294
And it really worked!!! it takes a while, you will need to put aside around 1-2 hours to go through it carefully step by step.
I flashed CWM using odin first.
Click to expand...
Click to collapse
How do you flash CWM using ODIN? CWM isn't a Bootloader, nor a PDA, nor a Phone, nor a CSC.
Thanks in advance, hope I'll get back my Galaxy Tab 7.7!
1. go to download mode
2. connect your device to your pc and start odin
3. put the cwm files on phone section of odin
4. flash awayyyyy....
Yay
Yaaaaay! Problem solved! My Samsung Galaxy Tab 7.7. P6800 is alive again!
The problem was so easy, that i laught alot, when solved it. The problem was with micro SDcard. I used micro SDcard from my last Nokia phone, but Nokia's micro SDcard didn't approach to SGT7.7, but it approached ONLY by the size! So I used another micro SDcard, which I got when I bougt my Tab! Woohoo, i'm so happy now :laugh:

Categories

Resources