[Q] No data after new rom install....maybe. - T-Mobile LG G2x

My buddy just rooted and flashed the Eaglesblood ICS 4.0.4 rom and noticed that he no longer shows 3 or 4 g just "E", and basically it goes nowhere unless on wifi. Did he just mess up an APN setting somewhere or could there be a wrong "radio" issue here??

Baseband-ril issue i guess. I use lg o2x though.

no speed
I have EB ICS 4.0.4 and I'm on simple mobile. I get the H by my signal bar but my speeds are worth nothing. I get about 120kbps down and 150kbps up. Maybe its baseband issue. I'm running m6600a-scautnz-2.0.972t 1 jul15 201 10:00:00 mp. Anyone has an idea if it will help updating it?
Thanks in advance.

olegveh said:
I have EB ICS 4.0.4 and I'm on simple mobile. I get the H by my signal bar but my speeds are worth nothing. I get about 120kbps down and 150kbps up. Maybe its baseband issue. I'm running m6600a-scautnz-2.0.972t 1 jul15 201 10:00:00 mp. Anyone has an idea if it will help updating it?
Thanks in advance.
Click to expand...
Click to collapse
No, updating will not help.
Well... actually, it might. But you'd lose being able to call(hearing/talking)

Update.
Buddy went to major city near by , got good data speeds, only shows 2g or 3g. but gets nothing near home town. Got at least 2g at home before now nothing...radio???
BTW Im new to this, what is baseband? ril?

Slow 3g
So it's not the phone but the carrier problem then? On the other hand I'm a truck driver and have tried the speed test in three different cities now. Still it's about the same.

Related

After rooting i get no H+

after i rooted i never get H+ anymore in my house. i used to be able to but now i dont.
hm?
did you root and load a rom? if so you probably now have HSDPA+HSUPA instead of ATT's locked down hspa+
Do a speed test if are getting over 3 MB/s download and more than 350 kb/s upload then the icon doesn't matter and you are doing fine.
Many have already mentioned you will likely not see the speed til the HSPA+ is fully turned on around March
Sent from my illmatic Inspire 4G / Desire HD
bkeaver said:
did you root and load a rom? if so you probably now have HSDPA+HSUPA instead of ATT's locked down hspa+
Click to expand...
Click to collapse
yeah i rooted and loaded the rom in the development section. id also do a speed test but i have like 2 bars now so i know its gonna suck haha.
Slightly off topic, I have always gotten an H+ at 3-4 bars but my speedtests (24 hours at couple hour increments) I've never gotten above 1.8Mb (1.0 min). In the store the data was flying, and across the street but didn't do a speedtest. Need to go back and try. Anyways I do wonder if H+ is going to be gimmiky until it's much broader release.
It's going to display the h+ anytime you're not connected to edge with the stock phone. When backhaul work is done you should see a difference.
waltah! said:
It's going to display the h+ anytime you're not connected to edge with the stock phone. When backhaul work is done you should see a difference.
Click to expand...
Click to collapse
that isnt what his issue is. read the rom that is posted thread... he isnt going to see the H+ symbol from what I have seen in from that thread...
Do you think its the rom or the radio?
Sent from my Desire HD using XDA App
It is the rom. I think the rom that attn1 posted just doesnt include the H+ icon.
A store rep told me that to see the speed increase I'll need a 4G sim card. Right now I'm getting around 2,997 kbps down & 698 kbps up. He said that Houston is a test market and that 4G went live yesterday. Only problem is that they won't be getting any 4G sim cards till next week.
Does this even sound legit?
mentalcase said:
It is the rom. I think the rom that attn1 posted just doesnt include the H+ icon.
Click to expand...
Click to collapse
Didn't even think that lol
Sent from my Desire HD using XDA App
i too have lost my HSDPA capabilities after rooting with GB sense 3.0 rom V5 rom..
In the network mode menu i only get the option for gsm and WCDMA??
Any ideas?
psupernak said:
i too have lost my HSDPA capabilities after rooting with GB sense 3.0 rom V5 rom..
In the network mode menu i only get the option for gsm and WCDMA??
Any ideas?
Click to expand...
Click to collapse
Idea...Don't bring up a very very old thread to ask a question that could have been answered by searching.
I got your 10 char right here
sorry dude, im still searching now but to no avail.. Its 2 AM here and im kinda stuck.. Has someone else esperienced this before? i used the GB sense 3.0i.....version 5.01 which is meant to include the H+?
psupernak said:
i too have lost my HSDPA capabilities after rooting with GB sense 3.0 rom V5 rom..
In the network mode menu i only get the option for gsm and WCDMA??
Any ideas?
Click to expand...
Click to collapse
psupernak said:
sorry dude, im still searching now but to no avail.. Its 2 AM here and im kinda stuck.. Has someone else esperienced this before? i used the GB sense 3.0i.....version 5.01 which is meant to include the H+?
Click to expand...
Click to collapse
LULZ.
you didnt lose your HSDPA 'capabilities'
you lost your precious H+ icon, which is nothing more than an AT&T cover up to try and trick you into thinking their network is better than others.....its an icon. it means nothing
in the menu, you are only supposed to get a GSM/WCDMA option because thats what the phone runs on.
unless you flashed a different RADIO, one that doesnt like your area, then there is nothing wrong and your HSDPA 'capabilities' are still there. go do a speed test, for petes sake....
search, hell, just READ the titles of a few threads and you will get your answer. it HAS been answered a couple hundred times here and there....
psupernak said:
i too have lost my HSDPA capabilities after rooting with GB sense 3.0 rom V5 rom..
In the network mode menu i only get the option for gsm and WCDMA??
Any ideas?
Click to expand...
Click to collapse
This Rom has the Ril in it for the Desire HD radio 26.13.04.19. I use this as my daily Rom with this radio and my phone runs better than stock. H+ was added for aesthetic reasons only.
Read the radio sticky about matching ril/radio combinations.
Sent from my HTC Inspire 4G using XDA App

[Q] Lousy Signal: Anyone Else?

Just checking to see if anyone else with an Inspire on AT&T has experienced a signal dropoff in the last two or three days. One day I'm pegged at 4 bars WCDMA, now I can't seem to get out of GPRS/Edge. Seems it coincides with the rollout of the update. Anyone else getting crappy reception in the last few days?
No good reception
Sent from my Desire HD using XDA Premium App
Reception is all right for could always be better, still waiting for AT&T to get the 4g ball rolling
Folks, I'm looking for those of you who have had LOSS of signal in the last week. Please no "mine sucks" or "mine is ok" kind of posts, i only want to hear from those of you who have had a change.
Does anyone know how to check the status of AT&T's cell towers? Is there a website that will show where they are and what their operational condition is?
You can call att and tell them where you are. They will give you information on the towers in your area.
Sent from my HTC Desire HD using XDA Premium App
Signal is crappy, but hasn't changed in the last few days. You should call AT&T and check with them
Well, just as I was about to call AT&T to find out what the heck might be going on, I now see my signal is very strong again, but with UMTS as the network type, though I'm showing 3G in my notification bar.
So, is UMTS the new 4G network and they were just changing the tower over the past few days?
They have been updating towers all over...So to answer your original question, yes I have experienced some bad signal at times, but has returned to a good signal after they finished updating whatever they were working on....
WC
maybe this explains my many dropped calls in the last few days..
Wild Child said:
They have been updating towers all over...So to answer your original question, yes I have experienced some bad signal at times, but has returned to a good signal after they finished updating whatever they were working on....
WC
Click to expand...
Click to collapse
What are you showing for network type?
Actually it depends on where Im at in my house...i can move 15 ft and itll pick up an Edge signal....then switch to H+,which is still just 3G for now until LTE network is up and running...Ive only seen 3G once or twice since Ive had the phone...Also just a side note...Im on an unrooted, untampered with 1.84 ROM...Based on your posts, your rooted and using a custom ROM, issue may not be the phone or the towers, may be the ROM your using,unfortunately with the way ATT provisioned this software...you may have issues with certain things using custom ROMS....
WC
Wild Child said:
Actually it depends on where Im at in my house...i can move 15 ft and itll pick up an Edge signal....then switch to H+,which is still just 3G for now until LTE network is up and running...Ive only seen 3G once or twice since Ive had the phone...Also just a side note...Im on an unrooted, untampered with 1.84 ROM...Based on your posts, your rooted and using a custom ROM, issue may not be the phone or the towers, may be the ROM your using,unfortunately with the way ATT provisioned this software...you may have issues with certain things using custom ROMS....
WC
Click to expand...
Click to collapse
I doubt that using the Custom Roms are the main issue. Many of the custom roms are using Stock Kernals and Radios. <- those are the two main contributing factors to cell strength and battery life.
I run MIUI on stock kernal now, with the new ATT Radio .26.06.06.30_M and have no issues. Denver CO Area and run full bars or -70 to -87 dcb at almost all times. Great download speeds.
Incorrect to a point....if provisioning isnt correct in the rom then there will be issues, att is trying to be slick in a lot of ways these days...
xKrisx said:
I doubt that using the Custom Roms are the main issue. Many of the custom roms are using Stock Kernals and Radios. <- those are the two main contributing factors to cell strength and battery life.
I run MIUI on stock kernal now, with the new ATT Radio .26.06.06.30_M and have no issues. Denver CO Area and run full bars or -70 to -87 dcb at almost all times. Great download speeds.
Click to expand...
Click to collapse
When i use Stock roms my signal is steady on H+ n a lil bit on Edge but mostly on H+.
On custom roms i stay on Edge.. H is rare or just dont stick
n yes im using the stock kernal n radio
Update: turns out they were working on the tower(s) in my area. Signal back to normal. Thanks for everyone's feedback.
this happened to me last month, and now today is happening again lol. seems like they are working on towers a lot recently in my area. if i go to another city i get full bar H constantly...oh wells hopefully they will finish all the tower work soon.

Sprint EVO.. Latest Cyanogen and Radio.. Stuck on 1x.. HELP!

New to this stuff, but have managed to fumble through getting phone rooted, flashed and functional... to a degree.
I have a HTC EVO on the Sprint network.
Android 2.3.3
Cyangen Kernel 2.6.37.4
Mod ver. 7.0.3.1
Baseband 2.15.00.04.08
So with everything up to date as far as i know I am stuck with a '1x' for a signal.
My mom has the exact same phone except its not rooted. Stock everything and shes getting a 3g signal when shes in town.
So Im stuck here. Anyone have a clue?
Im fairly new here and by no means a dev but i believe its because you have cyanogen its telling you the actual speed you have. while the stock evo only says 3G but is really only on 1x. try running speedtest on both devices.
-also please correct me if im wrong, read this somewhere and am currently experiencing it aswell
thanks ocruz301
Can anyone else chime in and verify this?
try re-configuring your roaming capabilities. Your issue is unlikely to do with CM7.
I have looked through the roaming menu and i dont see anything that looks incorrect.
Is there anything in particular i should be looking for?
Speedtest.net results:
average from several different locations.. 15kB
around the same for uploads..
600ish latency
I have travelled a little over 500 miles around Tennessee Arkansas and Mississippi and Im getting the same thing everywhere..
Anyone?.. anyone?
So these are the steps i have taken thus far:
-updated to latest cm7
-updated to latest radio
no go
flashed to stock rom and updated prl
ran speed test.. 15kB up/down.. EVEN THOUGH it SAYS 3g
flashed back to cm7
speed test.. 15kB
Does no one else have a freakin' EVO that can just chime in and let me know im the only asshole with this issue?
I have a somewhat same problem. My phone would drop to 1x every 10 to 20 minutes and stay there for a few minutes then go back to 3g. It does this throughout the day. Luckily I have 4G in most of my area and that helps me to avoid using 3g. The moment I turn off 4g it starts doing it again. It started a few weeks ago and I don't know what caused it. Like you have have tried different Roms and Radios but no help. I'll gonna try to unroot and go back to Sprint Rom and see it that helps.
hmmmm
I run king cocoa II rom and I thnk its the absolute best ive seen but its also froyo not gingerbread
Anyone, I am having the same issue, no matter which ROM I flashed, and whic kernel PRI or PRL I used, my speed is only 128K max with 1x icon

[Q] New to SGS2 727R

Hi all.
I just finished picking up my sgs2lte. Really excited about it. I just finished rooting it and now I would like to install an ICS 4.0.4 rom.
My specs are:
SGH-I727R
Android 2.3.5
Baseband I727RUXKJ7
Kernel 2.6.35.11
Build GB.RUXKJ7
I am hoping someone can assist me with this.
What is the best baseband for rogers?
What is the biggest sdcard that I can buy for it? I heard that this device can now accept 64 class10 sdcards, is this true?
Thanks all,
Heeter
I don't think it matters much.
UCLE2 is the recommended modem for most ROMs (Most ROMS will state which modem is recommended), especially the AOSP based ones like CM9 or AOKP. For the most part they seem to be interchangeable.
I have used the UCLE2 and UCLF3 baseband modems with no issues (I believe UCLF3 is the RAT unlocked rogers modem..).
Right now I am using the latest AT&T modem UCLF5, with CyanogenMod 9 (7/02/2012 nightly) and it seems to work just fine.
Are you able to get 4G with your setup?
Thanks for your response, Rabidsmurf
Heeter
Yes, although the phone is somewhat misleading, at least in CM9
The icon will show 3G until in use when it switches to H, I assume this is for power savings or something. Download the speedtest.net app to confirm. On 4G i get around 8Mb/s down and 2.5 Mb/s up.
Additionaly what Rogers calls 4G is HSPA+, if you go to About Phone > Status under mobile network type it should say HSPAP:15 (That is HSPA+ 4G on rogers), conversely 3G is UMTS:3. My phone flips between the two as I mentioned when not in use or in use, could be a ROM specific thing.
Heeter said:
Hi all.
I just finished picking up my sgs2lte. Really excited about it. I just finished rooting it and now I would like to install an ICS 4.0.4 rom.
My specs are:
SGH-I727R
Android 2.3.5
Baseband I727RUXKJ7
Kernel 2.6.35.11
Build GB.RUXKJ7
I am hoping someone can assist me with this.
What is the best baseband for rogers?
What is the biggest sdcard that I can buy for it? I heard that this device can now accept 64 class10 sdcards, is this true?
Thanks all,
Heeter
Click to expand...
Click to collapse
Hi
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
RabidSmurf said:
Yes, although the phone is somewhat misleading, at least in CM9
The icon will show 3G until in use when it switches to H, I assume this is for power savings or something. Download the speedtest.net app to confirm. On 4G i get around 8Mb/s down and 2.5 Mb/s up.
Additionaly what Rogers calls 4G is HSPA+, if you go to About Phone > Status under mobile network type it should say HSPAP:15 (That is HSPA+ 4G on rogers), conversely 3G is UMTS:3. My phone flips between the two as I mentioned when not in use or in use, could be a ROM specific thing.
Click to expand...
Click to collapse
Well, mine was saying 4G before the rooting with the factory settings,
But it says UMTS:3 on there now.
I will install CM9, maybe that will make the difference, I just installed the ATT UCLF5 radio, still 3G
Heeter
What ROM are you using?
If it's SKY ICS, in my experience it will always say 4G no matter what (Unless it's LTE maybe).
If you see UMTS:3 try to open an APP that has constant network demands, it might switch while you're looking at it in the status to HSPAP:15, sometimes it's tough to catch it as the phone seems to go idle as soon you go into the menus
I am also in Edmonton by the way.
Hi Rabidsmurf
Was mistakingly on the Chimera rom, but I just reformatted everything and now is using this SKY ICS 4.2F6 with the UXCLF3 radio, now I am getting the 4G signal
Thanks sooo much for helping me out.
Right on, cool, fellow Edmonton dude.
Heeter
No problem.
I was also going to suggest reviewing your APN settings if all else failed. Found a typo earlier with the APN that comes with CM9 rom (caused MMS to not work), guess that's why it's still an Alpha.
RabidSmurf said:
No problem.
I was also going to suggest reviewing your APN settings if all else failed. Found a typo earlier with the APN that comes with CM9 rom (caused MMS to not work), guess that's why it's still an Alpha.
Click to expand...
Click to collapse
lol actually its at the level of an RC, but I digress
I'm using the I727RUXLF3 Baseband on AOKP Build 40 in the Edmonton area as well and it's running great. I see the same behaviour with the switching between 3G/H signal.

Slow data speeds

So, I flashed CM11 today, and I'm not sure if it's just this specific rom or what (I had poweruser modified stock before) and it seems like my data speeds are really slow.
I had 5 bars with H+ (yes not LTE I know) but I was only getting 1 mb/s down speed.
Is there a baseband I can flash or some type of modem. Does anyone else have this issue?
Bump
Well,
I'm sorry that I can't exactly help your situation, But I can say that I am having a very similar issue. I am running D800 AT&T, CloudyStock V2.0 with dr87's Simple Kernel V5. Only have one APN, which the the Phone APN. Now, I do receive LTE, it also shows up on my phone as 4G.
I have also changed that lil bit in the Build.prop to my destination Country, which is US. But, anyway, After all of this I can only get maybe 2mbps downloads and if i'm lucky I will pull 1mbps upload.
I know for a fact that the LTE in my town is not that slow. I'm not really sure what is going on either.
Before I had CloudyStock on my G2 I could get around 11-12mps downloads with 4-5mbps uploads.
Sorry that I can't really help you out OP. I need help as well.
Since you mentioned, I have an AT&T with a T-mobile micro sim and the network signal (not data) has been very poor since I got the phone. Usually just 2 or 3 bars and completely lost the signal when I got down to the subway underground. I noticed that people were still using their phones while on the train so they could actually receive signals. I believe it's something to do with the sim but not for sure. I haven't had a chance to borrow anyone else's sim to try on mine so I couldn't really tell. I'm running CM 11 as well and I think the battery life has been reduced because of the weak network signal
Any help?

Categories

Resources