Ok, so here goes a real noob question!
Although I am not a NOOB, but what I have read just seems a little outrageous.
Ok, So i have successfully rooted. I have seen some posts suggesting the use of ROM manager, and other saying NO.
I have read the NOOB guide, and that seems to be a little excessive to install a ROM onto this device.
Do you have to use the Heimdall method, because I do not have C++ installed, nor do I even know how to use it.
I want to get CWM installed, but I cant seem to find a method for just that.
So if I understand correctly, I have to install a Kernel w/CWM, then I can boot into CWM and flash a ROM onto the device?
I looked on the wiki, but some of the links there are broken, and there are missing files as well.
I really hate ask these kind of question, but I feel that I am really stuck here.
if someone could please help.
primus123 said:
Ok, so here goes a real noob question!
Although I am not a NOOB, but what I have read just seems a little outrageous.
Ok, So i have successfully rooted. I have seen some posts suggesting the use of ROM manager, and other saying NO.
I have read the NOOB guide, and that seems to be a little excessive to install a ROM onto this device.
Do you have to use the Heimdall method, because I do not have C++ installed, nor do I even know how to use it.
I want to get CWM installed, but I cant seem to find a method for just that.
So if I understand correctly, I have to install a Kernel w/CWM, then I can boot into CWM and flash a ROM onto the device?
I looked on the wiki, but some of the links there are broken, and there are missing files as well.
I really hate ask these kind of question, but I feel that I am really stuck here.
if someone could please help.
Click to expand...
Click to collapse
If you already rooted, which you stated that you are, then download an app called SGS Kernel Flasher. Then download any kernel you like for whatever firmware you are running (2.2 kernels for 2.2.1 and 2.3 kernels for 2.3.x) and flash with the app, Note- I recommended you flash this one if you are on 2.3:
http://forum.xda-developers.com/showthread.php?t=1513287
Once your phone reboots it should have the kernel successfully installed and you should be able to boot into recovery by powering down the phone completely and holding the volume buttons and the power button
primus123 said:
... So if I understand correctly, I have to install a Kernel w/CWM, then I can boot into CWM and flash a ROM onto the device?...
Click to expand...
Click to collapse
Yes you can use kernel flasher, from market, just make sure you're flashing a ROM/kernel with same os(froyo or gb) you have currently running... If moving from froyo to gb you can use odin
Sent from my SGH-T959V using xda premium
dude, why are you worried bout the C++ stuff?
Just download it from here and install it like an app, nothing fancy.
Related
Hello, boy do I have a mishap. Well, anyway to begin I will say that I decided I wanted to root my phone to debloat it. So what I did, is downloaded the EE4 update and did the VooDoo V4 Kernel that flashes CWM and EXT4 and other junk. Well that all went great. I got it rooted and such but then just tinkering around I went into Rom Manager and told it to back up. WELL, when I did this the phone got locked on the SAMSUNG boot screen for hours and continued to refuse to boot. SO, I attempted to fix it by installing altered beast just to get the os running again and went into clockwork and backed it up. Then I went to the rooted ed1 to bring it back up to EE4 rooted and with the voodoo kernel and such but it refuses to open clockwork! The voodoo kernel changes filesystems and roots it and such but clockwork wont load. When I try to flash it in rom manager it says its succesful and then i go to reboot in recovery. It takes me to the Samsung Recovery 3e, I try to the update.zip, (yes i took the cwm recovery-update.zip and renamed it and through it in the sd card root) but all that happens is that a progress bar shows up for a split second then the android guy with the triangle and ! shows up and it does nothing. Help? I really need to back it up, preferably in the rooted ed1 but in ee4 will work to. Any ideas would be appreciated. I used odin v1.3 by the way. Im willing to try anything to get clockwork to boot so i can back it up. What do I do?
EDIT: Also, now when I go into 3e recovery, it complains saying " cant mount /dev/block/mmcblk0p3 " or something like that.
Did you read anything on this forum beforehand? Or just go link by link downloading files and deciding what to try on your phone?
Just saying..
Yeah, I did. Ive searched everywhere. I cant find anything about my problem. Ive looked at things that are close, hoping a solution can be found but nothing and no I wasnt just downloading files and spoon feeding them to my phone.. I just wanted to be able to debloat it.
Go search about Rom Manager and let us know what you find out...
I dont see how thats going to get me one step closer to solving my problem. Ive done the searching, now im asking.
Start w/ this one. http://forum.xda-developers.com/showthread.php?t=1100384
I can't tell where you are currently on your phone from reading that as it's to much text in one paragraph and it isn't put together in a logical sense and seems to jump around. I would look at the instructions for going to rooted EE4 in the Dev forum as that should get you to where you want to be with voodoo/cwm/rom
Instead of being a Forum Snob. If you know the answer, why don't you just help him out?
There's an abundance of confusing information on here and everyone uses acronyms. I too searched for hours on how to solve a similar problem and ended up having it taken care of for me. People join communities like this one for help. Not to get flamed for asking a question. It may be elementary to YOU but not everyone.
Thanks, for the care. Sorry about that if its jumbled, im frustrated with this because ive flashed the rooted ed1 about a billion times now, trying everything to get it functioning. Id be glad to try to explain again if that could help? Ah, yes. Well, I returned to the forum about installing the voodoo kernel. I followed the process word for word. But it just doesnt seem to want to work. Right now I just flashed it again back to the rooted ed1. Would I be able to put CWM on there at that point?
Jessman123 said:
Thanks, for the care. Sorry about that if its jumbled, im frustrated with this because ive flashed the rooted ed1 about a billion times now, trying everything to get it functioning. Id be glad to try to explain again if that could help? Ah, yes. Well, I returned to the forum about installing the voodoo kernel. I followed the process word for word. But it just doesnt seem to want to work. Right now I just flashed it again back to the rooted ed1. Would I be able to put CWM on there at that point?
Click to expand...
Click to collapse
Yes. But don't use rom manager. Use imnuts cwm recovery.
Sent from my SCH-I510 using Tapatalk
Alright, thanks. Ill try and use imnuts's cwm recovery. But if someone may answer a question, is the samsung bootloader unlocked?? My brother said thats something to know.
Jessman123 said:
Alright, thanks. Ill try and use imnuts's cwm recovery. But if someone may answer a question, is the samsung bootloader unlocked?? My brother said thats something to know.
Click to expand...
Click to collapse
Yes
Sent from my SCH-I510 using Tapatalk
so it is unlocked?? What does the exclamation triangle mean, when i try to do the update.zip from the samsung bootloader?
Oh and sorry if Im not getting this. Are you saying use a application that imnuts made? If so, could you be so nice to link it? Or a method he used? I looked for stuff but I didnt find anything other then what looks like a stock rom/kernel ed1 from him
I know how it is to be frustrated, but like they all said all of your questions have already been answered.
Here's my attempt to help:
Your problem lies in trying to flash CWR through ROM Manager, it currently doesn't play well with our phones. Word is that Koush (the creator) needs to update something for it to work with our phones. The bootloader is unlocked.
To flash imnuts' version of CWR, you'll need to use Samsung's leaked software called Odin - it's PC only. The alternative is Heimdall which is supposed to be cross-platform compatible, but the latest version is command-line only.
You have to find out if you've converted your system to EXT4 or if it's still RFS. That depends on if you have the Voodoo lagfix enabled or not. Check out the dev section and look for the titles that say [RECOVERY], [ODIN], [ROM], and/or something like "Get yourself to EE4 successfully".
A few links:
[HOW-TO] Get a rooted version of EE4
[RECOVERY][6-11-11]Clockwork Mod Recovery
[KERNEL][06-02-11] PeanutButta Jelly Time
Well, currently right now its rfs. Its the stock file system. What I was going to do, or did before, was to put it in download mode and flash the VoodooV4 Kernel. It roots the phone, and all that good stuff and is suppose to put the Voodoo recovery/cwm on there.
EDIT: Heres the proccess I followed before.
http://www.theandroidsoul.com/how-t...and-clockworkmod-recovery-installation-guide/
Jessman123 said:
Well, currently right now its rfs. Its the stock file system. What I was going to do, or did before, was to put it in download mode and flash the VoodooV4 Kernel. It roots the phone, and all that good stuff and is suppose to put the Voodoo recovery/cwm on there.
EDIT: Heres the proccess I followed before.
http://www.theandroidsoul.com/how-t...and-clockworkmod-recovery-installation-guide/
Click to expand...
Click to collapse
The recovery is a separate flash, both in odin. First the kernel, then Recovery.
Just follow here from the beginning, it should work for you:
http://forum.xda-developers.com/showthread.php?t=1122657
Well I have good news. I would like to announce that I have successfully installed CWM. I guess my phone just didnt like the other one or something. But following this link,
http://forum.xda-developers.com/showthread.php?t=1122657
I was able to get it installed. Now my only question is, I want this kernel http://forum.xda-developers.com/showthread.php?t=1092114 for my phone. But its not in a zip. Am I out of luck? Or do I not have to use CWM to install the kernel? Can I use odin and still be okay?
Jessman123 said:
Well I have good news. I would like to announce that I have successfully installed CWM. I guess my phone just didnt like the other one or something. But following this link,
http://forum.xda-developers.com/showthread.php?t=1122657
I was able to get it installed. Now my only question is, I want this kernel http://forum.xda-developers.com/showthread.php?t=1092114 for my phone. But its not in a zip. Am I out of luck? Or do I not have to use CWM to install the kernel? Can I use odin and still be okay?
Click to expand...
Click to collapse
You do need Odin to load that, but i'm wondering why you want to? Did you install the PBJ kernel following the instructions from the other link?
If you want to go down this route, be sure to apply the SD Card fix as well - you'll find posts about it.
I rooted the G2x, installed CWM using nvflash
http://forum.xda-developers.com/showthread.php?t=1108201
I bought the premium version of ROM Manager so that I can get access to the nightly builds. I choose the nightly build I want to install and select the google apps, I get to the clockwork recovery screen, it backsup data does MD5, and then format /cache /data and tries to install the ROM and it fails. I have tried this with #54-#58 and I get the same result. Can someone please point me in the right direction ?
and you created your own special thread for this why?
in my opinion, its faster and more helpful than search
Before you start downloading and flashing roms I suggest that you read through the entire first post of the nightly thread and after you are done re-read the post again then follow the links and re-re-read while you are flashing the roms. I myself am a newb to all this but I found that all of the information is already there if you just take your time and follow directions, and it will pay off in the end
dorksturhh said:
in my opinion, its faster and more helpful than search
Click to expand...
Click to collapse
Shows how lazy you are... and still not abiding by forum rules
Sent from my LG-P999 using XDA Premium App
Should get a 1 week ban for this.. C'mon bro use your resources, mods should lock this up.
Moved to proper forum.
dorksturhh said:
in my opinion, its faster and more helpful than search
Click to expand...
Click to collapse
bskim23 said:
Shows how lazy you are... and still not abiding by forum rules
Click to expand...
Click to collapse
I think he's being sarcastic although I could be wrong.
Sorry Guys did not mean to violate any rules here... I am just super frustrated right now. I have done Rom Manager CM7 installs some 5-6 times, the install process goes though backup, format /cache /data and then starts to install ROM and suddenly fails. Does CM7 nightly build install from Rom Manager work? I read though a ton of forum posts and looks like it is working for people or may be not... can some one point me to *A* thread that I can rely on to get CM7 on this G2X? Really really really appreciate your help on this.
ROM Manager is an inferior method of ROM flashing. Use NVFlash to flash ClockworkMod Recovery to your phone (NVFlash allows for a true flash rather than the application's fake flash) then when you want to flash a ROM (or do a backup, or anything else ROM manager does) just boot your phone into recovery (hold power and volume down until you see the green Android logo, trust me it will make sense) and do it from there.
I have never, ever, been able to get ROM Manager to work in flashing roms. Or for much of anything else for that matter. It's just better to do things directly.
Rooted the phone based on instructions from:
http://wiki.cyanogenmod.com/wiki/LG_Optimus_2X:_Rooting
Installed CWM from
http://forum.xda-developers.com/show....php?t=1108201
Installed ROM manger premium,
adb push cm_nightlybuild.apk /sdcard
when I reboot to recovery I get /!\ with an andriod green logo. What do I do next ? seems like it wont go into recovery mode now... but when I reboot (pull the battery and press power button) I am able to boot into stock Andriod 2.2.
If your are running the rooted stock you should know when your download rom they will be downloaded on your internal memory and when rom manager boot into recovery it is not able to see your internal memory you should put the roms on your external SD card
Sent from my LG-P999 using XDA App
Im sure this isnt the first time this ha been asked, but i couldnt find it. I have an rooted infuse(AT&T), when trying to flas a new ROM it tells me that i need to flas CWM. I try to but it asks me to confirm phone model, the infuse is not listed. I havent picked another phone from the list because i didnt want to brick this one. Anybody know what might be wrong and how to fix it. THANKS
ACESFULL82 said:
Im sure this isnt the first time this ha been asked, but i couldnt find it. I have an rooted infuse(AT&T), when trying to flas a new ROM it tells me that i need to flas CWM. I try to but it asks me to confirm phone model, the infuse is not listed. I havent picked another phone from the list because i didnt want to brick this one. Anybody know what might be wrong and how to fix it. THANKS
Click to expand...
Click to collapse
Aces, I'm think you're in danger of soft bricking your phone.
Try to read up a bit before you go on.
You need to select Samsung I9000 from the list.
Sent from my SAMSUNG-SGH-I997 using xda premium
ACESFULL82 said:
Im sure this isnt the first time this ha been asked, but i couldnt find it. I have an rooted infuse(AT&T), when trying to flas a new ROM it tells me that i need to flas CWM. I try to but it asks me to confirm phone model, the infuse is not listed. I havent picked another phone from the list because i didnt want to brick this one. Anybody know what might be wrong and how to fix it. THANKS
Click to expand...
Click to collapse
Um....what are you doing? With CWM you're not using the ROM manager app right? You want to get into red recovery, that's what most instructions are talking about when they say cwm.
To get there: (if you have it)
Power off, then hold power button and volume up and down. (3 button)
Keep held, Samsung will come on, then turn off, when it comes on again let go of the buttons....should go into red recovery. That's where to flash roms from. Good luck.
X,
Sent from Mt. Olympus
yup. Pick i9000 and flash. also check out GTG's Infused ROM OP!! VERY useful info to get you started.
other than people telling you to read this whole thread fails.
OK you can use cwm from rom manager for the i9000. but first you need to replace the recovery binary with a modded one. that needs root.
search dev section on cwm fully working... or something to that matter. also search YouTube. YouTube is great for any type of DIY activity including Modding your phone.
there is an alternative to this by flashing the community kernel or the defuse kernel in Odin or heimdall. that not only doesn't need root but will root your phone, enable voodoo lagfix, and give you red cwm. there is a one click heimdall package for the defuse kernel. personally I disable voodoo beforehand to speed up the process. to do this open the sdcard and create a folder and subfolder having the path /sdcard/Voodoo/disable-lagfix
to be clear you don't create /sdcard that already exists. it is the root of the SD card. if you use the built in file manager it wont show as /sdcard but will be "home" or something.
so open my files or other file manager, navigate to home which is normally the sd card, if not navigate to /sdcard and create a folder named "Voodoo" capital "V" then open Voodoo and create "disable-lagfix" once that is done you can flash the defuse kernel or the community kernel. then flash a rom then if it all goes well reboot into red cwm and enable lagfix and reboot again. it takes a while and the phone talks to you in sexy female robot voices for a while.
Thanks all. Maybe im in over my head a little. Ive been playing my my inspire 4G and it has been working fine(knock on wood), flashed several ROMS. I will read a little more into it and try what yall said to do. Thanks everybody
ACESFULL82 said:
Thanks all. Maybe im in over my head a little. Ive been playing my my inspire 4G and it has been working fine(knock on wood), flashed several ROMS. I will read a little more into it and try what yall said to do. Thanks everybody
Click to expand...
Click to collapse
I never had an inspire but there is no way this is harder. there is no locked nand on Samsung devices. just a weird recovery that is easy to work around on froyo since it was so easy to root. future devices will get increasingly hard but you have to understand that Samsung isn't taking anti-flashing measures like HTC and Motorola it is security measures to prevent exploits for being used in malware, things are getting harder because it is getting harder to root android. at some point the only way to flash is gonna be to wait for a leaked rom, edit the images and then flash. or some complicated way we haven't seen yet.
ACESFULL82 said:
Thanks all. Maybe im in over my head a little. Ive been playing my my inspire 4G and it has been working fine(knock on wood), flashed several ROMS. I will read a little more into it and try what yall said to do. Thanks everybody
Click to expand...
Click to collapse
np.
IF you're looking to go from froyo to a gb rom,
I suggest starting here:
http://forum.xda-developers.com/showthread.php?t=1331381
learning how to flash with heimdall is pretty simple.
Flash it once in download mode. Flash it again with the bootloaders box checked.
reboot and you're in uckj4.
Then flash the kernel to give you recovery
then flash the gb rom you want...
there are other methods...it's a matter of prefs
I've tried everything I can think of to get ClockWorkMod working on the SGH-T959V. I have rooted the phone with SuperOneClick and I've installed ROM Manager. After I start rom manager and select 'Flash ClockworkMod'. I get a list of 4 phones and mine isn't listed, the closest one is the Samsung GalaxyS i9000 which I have tried but when I reboot into recovery I never get the ClockworkMod Recovery.
Any ideas are greatly appreciated.
Thanks.
Rom manager doesn't work with our phones to get cwm you have to flash a kernel that has it in it
Sent from my GT-P7510 using XDA
1) DO NOT use ROM Manager (or as Raver memorably put it, ROM Mangler) on this phone - you will mess it up.
2) Any of the modified kernels in the Development section will give you CWM. Try AntonX's kernel (assuming you are on a stock ROM) - I found it gave best results. Use the SGS Kernel Flasher from the Market/Play - it's the easiest way to install a new kernel.
3) Before asking any more questions, read Read READ. Read the guides and the stickies, then read them again. I have found the guides of lumin30 and juls317 to be very helpful.
If your phone is still on Froyo, then look in the Dev section for Krylon360's recovery. If you're on Gingerbread then read the post above this one as there are plenty of ROMs/kernels for this phone that have CWM.
Really man, do you read.
Sent from my SGH-T959V using xda premium
The easiest way is just get one of the one click packages. I just updated the thread today. Note it is a sticky thread. It will always be easy to find at the top of the dev forum
No need to flash the whole rom or fuss with odin or heimdall cli/frontend.
Lets keep the thread friendly. Please search
I have this phone does not work the USB port serves only for charging but not for USB and have root but I want to put the CWM recovery but only schoolmaster to install with pc odin or adb but I need to do it without pc I know that rom manager not served if anyone knows how to do it without something like flasisifi pc or kernel flasher is agradeceria
jet_98 said:
I have this phone does not work the USB port serves only for charging but not for USB and have root but I want to put the CWM recovery but only schoolmaster to install with pc odin or adb but I need to do it without pc I know that rom manager not served if anyone knows how to do it without something like flasisifi pc or kernel flasher is agradeceria
Click to expand...
Click to collapse
Since you are rooted already, yes it is possible. You can use https://play.google.com/store/apps/details?id=neldar.sgs.kernel.flasher&hl=en and select the custom kernel you want (since I'm assuming you're still on stock, the blastoff kernel from http://forum.xda-developers.com/showthread.php?t=1828171 works well - use SGS kernel flasher the first time, then flash again from CWM to get wifi working). On this phone, the kernel and the recovery are always together in the same file so by flashing a custom kernel you will get CWM.
That being said, I would recommend AGAINST doing this because if it fails you have no way of fixing things as your USB port doesn't work. So, be very careful - check your md5sum, download it again, and check the md5sum of the new file. If they match, then you're probably good to go. This warning also goes for anything else you may want to flash from CWM should you decide to go ahead.
xc-racer99 said:
Since you are rooted already, yes it is possible. You can use https://play.google.com/store/apps/details?id=neldar.sgs.kernel.flasher&hl=en and select the custom kernel you want (since I'm assuming you're still on stock, the blastoff kernel from http://forum.xda-developers.com/showthread.php?t=1828171 works well - use SGS kernel flasher the first time, then flash again from CWM to get wifi working). On this phone, the kernel and the recovery are always together in the same file so by flashing a custom kernel you will get CWM.
That being said, I would recommend AGAINST doing this because if it fails you have no way of fixing things as your USB port doesn't work. So, be very careful - check your md5sum, download it again, and check the md5sum of the new file. If they match, then you're probably good to go. This warning also goes for anything else you may want to flash from CWM should you decide to go ahead.
Click to expand...
Click to collapse
install the kernel reset and started then talk normal start and only lasted one minute and reboots and then does the same and when you step recovery all say wrong and even tinges the recovery of stock will not let me delete the data 'll have to reinstall the kernel or 'll have to do something else
jet_98 said:
install the kernel reset and started then talk normal start and only lasted one minute and reboots and then does the same and when you step recovery all say wrong and even tinges the recovery of stock will not let me delete the data 'll have to reinstall the kernel or 'll have to do something else
Click to expand...
Click to collapse
I'm not sure I understand what your current situation is. My interpretation is:
1) You went ahead and tried flashing a kernel
2) You can boot up normally but you reboot after about a minute.
3) You can't wipe anything in recovery
3) When you're getting error messages, please copy them out word for word what they are. There are many similar sounding error messages.
If I got any of the above wrong, let me know and we'll go from there. Also, when you're in recovery, does it say "3e" or CWM (ie is it the Stock recovery or not).
P.S. By posting in a variety of threads the same message, you will not get help faster and it will just make people want to help you less. If you keep everything in one thread then things stay organized and its easier for people to help you.
P.P.S. It sounds as if you're translating from a different language. If indeed you are, please paste the equivalent in your native language below (there's an off-chance I'll understand it).
xc-racer99 said:
I'm not sure I understand what your current situation is. My interpretation is:
1) You went ahead and tried flashing a kernel
2) You can boot up normally but you reboot after about a minute.
3) You can't wipe anything in recovery
3) When you're getting error messages, please copy them out word for word what they are. There are many similar sounding error messages.
If I got any of the above wrong, let me know and we'll go from there. Also, when you're in recovery, does it say "3e" or CWM (ie is it the Stock recovery or not).
P.S. By posting in a variety of threads the same message, you will not get help faster and it will just make people want to help you less. If you keep everything in one thread then things stay organized and its easier for people to help you.
P.P.S. It sounds as if you're translating from a different language. If indeed you are, please paste the equivalent in your native language below (there's an off-chance I'll understand it).
Click to expand...
Click to collapse
If you are in the correct idea that's what happens to me
I think the reason you do not understand me because I am from Mexico and speak Spanish English is difficult to read but I can write it if you want to write in Spanish but I doubt you understand me more
jet_98 said:
If you are in the correct idea that's what happens to mein the state you are in, can you get to
I think the reason you do not understand me because I am from Mexico and speak Spanish English is difficult to read but I can write it if you want to write in Spanish but I doubt you understand me more
Click to expand...
Click to collapse
Ok, I might be able to understand some of the Spanish as I speak French as well, but lets keep going in English.
Anyways, when you go into recovery (I assume you can still get into recovery), does it say <3e> or CWM? If it says CWM, is it red or blue? If its <3e>, then you're still on stock recovery and the kernel didn't flash properly.
Also, can you please go to Settings, About Phone, and read off the Kernel Version? If you can't get there, what is the last screen you see before it reboots?
Hi guys I'm new to this flashing etc world. I used rom manager and installed the wrong clokworldmod and my phone only loads samsung galaxy s 4g screen. I saw the thread about not using rom manager but I already did yesterdey. I'm trying to gain access to download mode with odin but I'm not able to get in!
Drake316PR said:
Hi guys I'm new to this flashing etc world. I used rom manager and installed the wrong clokworldmod and my phone only loads samsung galaxy s 4g screen. I saw the thread about not using rom manager but I already did yesterdey. I'm trying to gain access to download mode with odin but I'm not able to get in!
Click to expand...
Click to collapse
yeah, ROM Manager is a bad thing when it comes to our phone.
ODIN does not put your phone in download mode. There are numerous ways to accomplish that and those are outlined in a few different posts here as well as the wiki.
Do you know if you were on Froyo or Gingerbread before you tried to flash something? Also, what ROM did you try to flash? Going from Froyo to Gingerbread, and vice versa, requires you to flash the proper boot loaders.
I suggest checking out Lumin30's [GUIDES] Fresh out of box Galaxy S 4G [SOLVED] | Heimdall One-Click For Dummies. Awesome guides and they should get you back to a working status.
Reply
I was on Gingerbread 2.3.6 something like that, I wanted to flash to Vahalla Black but didn't even get close to that process sorry for my english. I will check the guides thanks for the fast respond! Thanks again already on download mode!
No worries on the English; you did quite well
Let us know how it goes and if you need help. There are plenty of us here that can help. Once you get the one-click installed, you should be able to flash Valhalla Black with no problem.
Good luck!
Just fine I think
Sent from my SGH-T959V using xda premium
Thanks!!
Thank you very much!! Fixed my phone thanks to you and XDA! I will try to install a custom rom this time I hope to do it well thanks to the links you provided.
Question about flashing ROM
Hi, I fell I'm missing something I don't know where to start so I can flash my already rooted phone with Vahalla Black. Sometimes I read use CWM, other post dont use it,etc I feel lost here. Could you just let me know what I need to flash, software etc.
Drake316PR said:
Hi, I fell I'm missing something I don't know where to start so I can flash my already rooted phone with Vahalla Black. Sometimes I read use CWM, other post dont use it,etc I feel lost here. Could you just let me know what I need to flash, software etc.
Click to expand...
Click to collapse
Use the method in the guide in the first link of my signature. Look for Flashing Custom ROM's. You will be using CWM to get Valhalla Black on your phone. The guide has step by step directions.