Database Info

[Kernel][AOSP/TW] ChronicKernel - (UV/GPU/CPU-OC/dyn fsync/Linaro) [05/07/2014]

ChronicKernel for AT&T Samsung Galaxy S4​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include
/*
* Your warranty is now likely void.
*
* I am not responsible for bricked devices, dead SD cards,
* spontaneous combustion, or any other host of cosmic penalties
* which may befall you, your family, or your phone.
*
*/
Here is a initial kernel for AOSP/TW. It has all the features you would expect from a modded kernel, CPU OC, GPU OC, more CPU governors, Undervolted, Underclockable, GPU OC CPU L2 OC, and linaro -o3 optimizations
Click to expand...
Click to collapse
Screenshots
Requirements
* Rooted (obviously)
* I use CyanogenMod as my daily, so i don't test the TW version much..it should be fine though.
Installation
1: Place zip on sdcard
3: Reboot into recovery
3: Clear cache and dalvik cache
4: Flash zip
5: Reboot
6: If desired edit the init script at /system/etc/chronic-config.sh to suit your needs
7: Profit
ChronicKernel
* All-in-One kernel for all qualcomm variants (AOSP/CM only)
* Compiled with linaro
* GPU OC to 627 Mhtz (450Mhtz default - configurable though chronic-config.sh init script)
* CPU OC to 2322 Mhtz (1890 Mhtz default)
* CPU L2 cache overclocked to 1.3Ghtz
* Raised the low/med/high values for GPU governor one step each
* Added many I/O Schedulers
* Some scheduler performance tweaks
* Added CPU Governors intelidemand, wheatley, lagfree, linoheart, smartassH3, badass and smartmax (Default gov = intellidemand)
* Dynamic Fsync
* F2FS Support
* User adjustable CPU uV
* frandom support
* Optimized and compiled with with the "Optimize a lot, or -o3 option)
* USB fast charge (disabled by default - configurable though chronic-config.sh init script
* Patched to Linux 3.4+
May-7
* Added back patch to ramdisk for PACMAN rom.
* Added F2FS support
* Synced ramdisk with CM
April-23
New Release v3.0 All-In-One AOSP_KK4.4 Kernel!
* Sorry for the long delay. Got burnt out on android for awhile and got some new toys as well so was busy
* All the needed updates to kernel and Ramdisk since last release and to comply with CM"s new all-in-one rom build,
because of this we can now use one flashable zip for all qualcomm variants now. I added the auto-loki patching from
CM's rom zips so loki should be done for you. let me know if you have any issues.
* Updated kernel to 3.4.82
* I'm sure there are a few small fixes I forgot since last release but basically you can expect what you did with the last release just up to date.
Dec-24
New Release v2.4 for AOSP Android KitKat 4.4! (TW to follow soon)
Changes since v2.3:
* Got rid o dcvs governor as it never worked
* Updated to offical Android 4.4.2/CM-11 Kernel source, changes include:
* We are now using the msm2 gpu driver not msm.
* Updated WiFi Drivers
* Updated Sensor drivers
* Many changes to the framebuffer and vidc driver
* Linux 3.4.75
And as always the ramdisk is synced with CM as of time of compile
Oct-28
* AOSP-JB4.3: Tagged v2.3.3 (maintenance update)
* AOSP-JB4.3: Fixed issue with latest ROM builds
Oct-26
* AOSP-JB4.3: Tagged v2.3.2 (maintenance update)
* AOSP-JB4.3: Merged all the upstream commits from CM, should help with stability
* NOTE: If your colors are off with the display. Its because your ROM hasn't been updated to latest display drivers, ask your ROM developer to update their ROM.
Oct-20
* Common: Updated to Linux 3.4.66
* Common: Added Faux123's Simple GPU governor
* Common: Fixed compatibility with PAC
* AOSP-JB4.3: Merged upstream changes for compatibility with latest CM nightlies
* TW: Tried to fix issue with LPM mode (charging while off)
Oct-6
* Bumped AOSP to v2.2 and TW to v1.2 respectivly
* Common: Fixed issue across all custom S4 kernels where the Governor is only applied to online cpu cores. They are now set regardless
* Common: More aggressive L2 Overclock, bumped max L2 freq by 100 Mhtz and have a more aggressive scaling of the L2 freqs
* Common: Updated to Linux 3.4.62
* AOSP-JB4.3: a few (minor) upstream changes
Sep-5
* AOSP-JB4.3: Merged over 200 commits from CM to bring in sync, No other changes, although seems performance is a little improved
Aug-24
* General: initial release ot the TW/GE kernel, refered to as TW-JB4.3, this is the same as the TW (now known as TW-JB4.2) just compatible with GE roms
AOSP-JB4.3
* AOSP-JB4.3: Synced Ramdisk with CM, latest nightlies should work now
* AOSP-JB4.3: Fixed a bad merge in the last version related to I/O scheduling
* AOSP-JB4.3: Added official Samsung exFAT support (thanks ktoonsez for original commit)
* AOSP-JB4.3: Updated to Linux 3.4.59
* AOSP-JB4.3: Tagged v2.1
AOSP-JB4.2
* AOSP-JB4.2: Added official Samsung exFAT support (thanks ktoonsez for original commit)
* AOSP-JB4.2: Updated to Linux 3.4.59
* AOSP-JB4.2: Tagged v2.1
TW/TW-JB4.2
* TW: Some cleanup to try and make it more stable
* TW: Added official Samsung exFAT support (thanks ktoonsez for original commit)
* TW: Updated to Linux 3.4.59
* TW: Tagged v1.1 and will be known from this point on as "TW-JB4.2"
TW-JB4.3 - TW/GE
* TW-JB4.3: Initial TW/GE kernel v1.0
Aug-16
* AOSP-JB4.3: Maintenance update - Synced with upstream CM kernel at time of compile - glitches should be gone
* Note: sorry for the delay. i was busy getting 10.2 booting on pyramid/glacier/holiday
* Took the version number out of the OP title as its not the same across all platforms
Aug-4
* AOSP-JB4.3: Added AOSP 4.3 kernel, has all the updates from CM's kernel as of this date
* AOSP-JB4.2: Sync with CM. a little clean up
* TW: TW kernel is now out of RC and v1.0, Merged a few things from the AOSP-JB4.3 kernel
* There were a good amount of updates that are kinda hard to explain. if you want more details check my github
Old Changelogs
July-20
* TW: RC2 release
* TW: tried to fix exFAT support, please let me know
* TW: Fixed an overlook that was causing the GPU to stay at a higher freq then normal
July-18
* Fixed a few little overlooks on my part in the TouchWiz beta1. Here is RC1
July-17
* inital TW build, still beta but should work fine just might have a couple things enabled (I/O schedulers that dont work or shouldnt be)
July-14
* Fixed Color temp settings not showing in Advanced Settings
* Couple tweaks to fastcharge cherry-picked from ktoonsez's kernel
* Merged JFA source
* All CM changes merged
* Added option to configure CPU OC from chronic-config.sh
* Fixed a race condition between chronic-config.sh and init.qcom.post_boot.sh setting governor
* Updated to Linux 3.4.52
* Fixed a type-o in chronic-config.sh that might have prevented dynfsync from being set to the desired setting
* Initial support for the Sprint variant
* General cleanup
July-2
* Reworked the way the config script works. it now sets gov correctly. it was renamed to chronic-config.sh and moved to system/etc/
* A few upstream updates
June-30
* Maintenance update
* Merged all upstream CM changes, should work on latest nightlies now
June-26 Stable Release
* Over 100+ upstream commits, like vidc etc, CHECK HERE for details
* Updated to MFx source/google sources
* small bugfix to screen off max gov
* wakelock fix (upstream)
* Updated to Linux 3.0.50
* Few misc bugfixes
** Honnestly the changelog doesnt do the update justice. CHECK HERE for details
June-18
* Upstream: Kernel source updated to MDL (samsung)
* Bugfix: Synced ramdisk with upstream CM to fix issue with bluetooth
* Fixes to Fast charge
* Bugfix: fix issues with workqueue (ktoonsez)
* Screen off Max freq will be disabled while in call (ktoonsez)
* Bugfix: Two EHCI: HSIC commits from caf to fix a wakelock
* Added CIFS Support
* Switch to intellidemand as default CPU governor
* Set 504Mhtz as boot freq for GPU
* GPU: Changed 544mhz to 545mhz to conform better with the pll table
* reduce some log spam (ktoonsez)
* GPU OC: Add 627mhtz step
* Linux 3.4.49
June-11
* Merged all upstream changes from CM kernel, including things like the MDM kernel source update
* Updated to Linux 3.4.48
* GPU OC now correctly reflects the current gpu freq to sysfs
June-7
* Pretty sure the intellidemand issues are fixed now
* Some bugfixes from caf for cpufreq and cpufreq stats
* GPU OC is fixed now (wasn't working correctly, would reject any freq higher then 450)
* GPU OC steps are now 504 544 and 601mhtz
* Synced with upstream (CM)
June-4
* Added in between steps to OC freqs to try and help people squeeze a little more out of the CPU (ktoonsez)
* GPU OC to 533Mhtz
* Added some missing intelidemand code to try and fix battery drain
* Some upstream changes like control screen color temp by sysfs
* Switched back to interactive as default governor
May-31
* Tweaked the GPU bandwith and governor low/med/high values for better performance
* Some bug fixes from type-o's made by samsung
* Removed CPU governors that don't support hotplugging (ktoonservativeq, dancedance)
* Min cpu freq with start at 378Mhtz for all cores
* Switched to XZ compression when making kernel to reduce size (the only impact on user end is a 1 sec longer boot time on Samsung splash)
May-29
* Reverted some cherry-picks from upstream that was causing bootloops for some
* Fix for GPU governor, it was sometimes getting stuck at 450 mhtz even with screen off (credits: ktoonsez)
* Updated the updater-script in the flashable zip to do some housekeeping before flash like remove old modules
May-28-build2
* Fixed bad zip packages
May-28
* Rebased source off of ktoonsez kernel,
* Fixed all the instability from the last releases
* CPU OC up to 2322 Mhtz (not all devices can handle this!)
* added frandom support
* Added a few Governors and I/O Schedulers
* Disabled a lot of useless debugging options
* Disabled un-needed modules
* More general build optimizations
* Other changes I forgot
May-26-build2
* Fixed all the bootloop issues from the last build
May-26
* Bugfix: cpu freqs on all cores but core0 weren't being set to desired levels
* Bugfix: a lot of block (I/O) fixes from caf and faux123
* CPU is now overclockable to 2268Mhtz but not all devices, including mine can handle this.
* CPU can now be overvolted to 1500 uV
* CPU L2 cache overclock to 1.3Ghtz (this seemed to give the most performance boost out of any overclocking so far)
* full kernel based mpdecision (there is an init.qcom.post_boot.sh script included that will disable userspace mpdecision, DON'T REMOVE IT)
* Added back all the special UID drivers that got disabled
* A lot of cleanup to the defconfig and disabled a lot of useless options and enabled some that weren't there before
* Switched to intellidemand as default governor
* Switched to ROW as default I/O scheduler
* CPU: Boot at default freq of 1890Mhtz for stability
* Probably a lot more small tweaks I'm forgetting
May-18
* Added an init.d script to zip to help control custom kernel settings
* Added CPU OC to 2106 Mhtz (1998 mhtz default)
* Set default GPU OC to 450mhtz to save battery (still overclockable via 89chronic init script)
* Adjusted the GPU Bus bandwith, seems to help with performance and battery life
* Lots of updates for CM kernel (gpu drivers etc)
* Maybe a couple other tweaks I forgot to list
May-14
* initial release
* Please keep all comments in this Discussion Thread. Any comments not in that thread will be ignored. Feel free to use the DevDB Bug reporting option as you see fit. This is critical in keeping the same question from being asked times in 5 different threads all with the same answer. It was really slowing down development.
* ]If you have problems with frequencies sticking use "No frills CPU Control" and go to Settings and prevent other apps from changing CPU settings
* Although this kernel has now reached "stable" status. bugs still could pop up. please if you find a reproducible bug and decide to post please try and provide a last_kmesg or logcat.
* Versions go as follows: AOSP-JB4.3 = CM-10.2 etc, AOSP-JB4.2 = CM-10.1 etc, TW-JB4.2 = Android 4.2 TW based ROMs, TW-JB4.3: Android 4.3/Google Edition based ROMs
AOSP-JB4.2 : ChronicKernel-JB4.2-AOSP-ATT-v2.3.zip
AOSP-JB4.3 : ChronicKernel-JB4.3-AOSP-ATT-v2.3.3.zip
AOSP-KK4.4 : ChronicKernel-KK4.4-AOSP-JFLTE-v3.1.zip
TW-JB4.2 : ChronicKernel-JB4.2-TW-ATT-v1.3.zip
TW-JB4.3 : ChronicKernel-JB4.3-TW-ATT-v1.3.zip
Goo.im Repo : CLICK HERE
* This Kernel can also be downloaded directly with GooManager *
My Github (main): https://github.com/Team-Hydra/android_kernel_samsung_jf
* First off of course cyanogen, the CyanogenMod project and all who contribute.
* A lot of this was taken/based off of flar2's Kernel for the HTC One, so thanks for the source!
* Also grabbed some things from Faux123's kernel
* All the people who have helped me learn more and more over the past 4 months (arco/dastin1018/android1234567) you guys are the best!
I really didn't want to do this but people keep asking so here is a donation link if you want to buy me a coffee or pack of smokes (I go through a lot sitting on the PC messing around lol) go ahead. But not required or expected by any means
Note: The name on the paypal account may say patricia, this is because it's a family paypal account.
Happy Flashing
Albinoman887
XDA:DevDB Information
[AOSP/TW] ChronicKernel, a Kernel for the AT&T Samsung Galaxy S 4
Contributors
albinoman887
Kernel Special Features: * Compiled with linaro * GPU OC to 627 Mhtz (450Mhtz default - configurable though chronic-config.sh init script) * CPU OC to 2322 Mhtz (1890 Mhtz default) * CPU L2 cache overclocked to 1.3Ghtz * Raised the low/med/high values for GPU governor one step ea
Version Information
Status: Stable
Created 2013-10-09
Last Updated 2014-05-07

Reserved
Please keep all discussion in the new Q&A thread please. otherwise your comment will most likely be ignored. Check "NOTES" section in OP for details

Is this Loki patched? Flashing it with TWRP over the CM nightly stuck my device at the boot logo until I reflashed the nightly.
Edit: I just realized i'm the second post on one of the best CM kernels I've used this kernel on every update since June, and as of October 7th, it's by far one of the best kernels i've had the pleasure of using.

Any way you could make this for Touchwiz?

VeryCoolAlan said:
Anyway you could make this for Touch wiz?
Sent from my SAMSUNG-SGH-I337 using xda premium
Click to expand...
Click to collapse
Any way you could make this post without quoting the entire op...?
Sent from my AT&T Galaxy S4 Running AOKP 4.2.2

Mike on XDA said:
Any way you could make this post without quoting the entire op...?
Sent from my AT&T Galaxy S4 Running AOKP 4.2.2
Click to expand...
Click to collapse
+1
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2

i am also having this problem
breakingspell said:
Is this Loki patched? Flashing it with TWRP over the CM nightly stuck my device at the boot logo until I reflashed the nightly.
Click to expand...
Click to collapse
i am also having this problem

breakingspell said:
Is this Loki patched? Flashing it with TWRP over the CM nightly stuck my device at the boot logo until I reflashed the nightly.
Click to expand...
Click to collapse
Yeah, I don't think this is Loki patched or at least not correctly. I've tried a couple of times on both CM and SlimBean to try and flash it. Everytime it ends up stuck at the Samsung boot logo.

I even tried it with the auto-loki recovery. Still didn't boot up.
Sent from my SGH-I337 using xda app-developers app

david.degraw54 said:
I even tried it with the auto-loki recovery. Still didn't boot up.
Sent from my SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
I tried this as well, to no avail

breakingspell said:
I tried this as well, to no avail
Click to expand...
Click to collapse
Insanity is doing the same thing over and over again and expecting different results.
I did the same thing as all the others and ended up unable to boot - this Kernel might be ok for Canadian PHones but it is clearly not ready for ATT SGH I337 phones that need to have LOKI installed -
I am going to pass on this until I have seen a number of posts from others who have flashed it successfully
for now, I would discourage you from flashing this Kernel if you are considering it until the OP has addressed this issu

Mike on XDA said:
Any way you could make this post without quoting the entire op...?
Sent from my AT&T Galaxy S4 Running AOKP 4.2.2
Click to expand...
Click to collapse
LMAO... everyone PLEASE read this post! :laugh: :good:
Sorry I know I'm not helping in this thread. It's just that this is my biggest Internet pet peeve.
Well, this and cats.

Here's albinoman887's kernel. I noticed you guys were having issues so I compiled it myself (had to change a couple things) so that you guys could flash it. I've tested it and it works just fine.
@albinoman887
If you don't want this link up just let me know. I will take it down. Feel free to throw it up in your OP until you get things worked out. If you need some help or anything just let me know.
ChonicKernel-v0.6.0
DOWNLOAD HERE

task650 said:
Here's albinoman887's kernel. I noticed you guys were having issues so I compiled it myself so that you guys could flash it. I've tested it and it works just fine.
Click to expand...
Click to collapse
+1 confirm, works like a charm, thanks bro!

task650 said:
Here's albinoman887's kernel. I noticed you guys were having issues so I compiled it myself (had to change a couple things) so that you guys could flash it. I've tested it and it works just fine.
@albinoman887
If you don't want this link up just let me know. I will take it down. Feel free to throw it up in your OP until you get things worked out. If you need some help or anything just let me know.
DOWNLOAD HERE
Click to expand...
Click to collapse
Thanks Task! Nice work and thanks for the proof that it works - will give it a shot...

Sorry guys. don't have this phone. thought i patched it correctly. must be a small error on my part. i'l look into it

After flashing, my ROM won't boot and if I reflash my ROM it hangs at starting apps...

skullassfreak said:
After flashing, my ROM won't boot and if I reflash my ROM it hangs at starting apps...
Click to expand...
Click to collapse
Did you flash the one in post # 12?

new build posted. hopefully it flashes correctly i dont have the device to check i think it was just my updater-binary though, it was smaller then all my other zips. might have been curupted. as i patched with loki and it works fine. let me know

0.7.0 works on Slimbean weekly 6.2. Just flashed a minute ago, will report later today as to performance.
Do you have a kernel tweaking app you recommend using with this?
Does this support faux sound?
Sent from my SGH-I337 using Tapatalk 4 Beta

[ROM] CyanogenMod 11.0 | Android 4.4.2 KitKat [KANG] [May-6]+[NIGHTLIES]

| CyanogenMod 11 - Android 4.4.2 - KitKat |
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include
/*
* Your warranty is now likely void.
*
* I am not responsible for bricked devices, dead SD cards,
* spontaneous combustion, or any other host of cosmic penalties
* which may befall you, your family, or your phone.
*
*/
If you ask any questions that are answered in the first two posts your question will be ignored. If you don't search prior to posting you will be ignored. If you don't read you will be ignored. If you've done all that and still don't have an answer then feel free to ask your question. Ambiguity doesn't help anymore. Elaborate. It's that simple.
Click to expand...
Click to collapse
Built from CM source
Service
Text
Data
Call
Audio
WiFi
Google Now
Bluetooth
GPS
MMS
Video playback
Audio playback
SDcard mounting
Camera
Video Recording
You tell me
Do NOT use superwipes
Wipe data, cache, and dalvik cache
** (if you are simply applying an update to this rom base this might not always be required)
*** ((but do not report bugs if you didn't full wipe))
Flash ROM
Flash GAPPS (in 2nd post)
Reboot
???
Profit
To enable Developer Options and Performance go to Settings, About Phone and repeatedly press Build Number.
If you use ADB read this: PSA by CM
If you use reboot to recovery read this: PSA by CM
Regarding new Superuser: PSA by CM
Read the FAQ thread here before posting any questions in this thread: FAQ
android1234567 for his work on ION support with camera!
johnnyslt
And any and all users in this thread who contirbuted or will contribute to making this ROM as stable as possible
dastin1015 for being an awesome dev partner and friend!
gerrit and everyone on it
All my supporters!
I really didn't want to do this but people keep asking so here is a donation link if you want to buy me a coffee or pack of smokes (I go through a lot sitting on the PC messing around lol) go ahead. But not required or expected by any means
Note: The name on the paypal account may say patricia, this is because it's a family paypal account.
Thanks and happy flashing!
Download link is in 2nd post

May-6
* New EXP CAF build
* Still working on camcorder. try todays nightly, i didnt have time to compile both builds but I made some changes that might fix it
May-2
* Added link to a test build with CAF kernel...
April-24
* Oh don't even ask for a changelog its been so long....
Jan-15
* Kernel: fixed issue with mobile radio (sigh.)
* Switched to adreno blobs from mako (MR1)
* Reverted CRT hack for 4.1 (credit: android1234567)
* Kernel: disabled some un-needed debug options
* Updated to newer ril to fix mobile network selection
* Synced with CM
Jan-12
* Android 4.4.2
* ION support (credit: android1234567)
* A lot of work done to the camera wrapper by dastin1015 to fix some bugs, and be generally more compliant with KitKat
* Fixed audio in VoIP calls (credit: ivanich)
* Fixed sdcard issues (credit: android1234567)
* increased PMEM SMI size, hopefully fixed camcorder crashing after multiple recordings
* Clean sync of GPU drivers from samsung msm8660 common 3.0 kernel (seems to yield better performance)
* Synced with CM at time of compile
* Probably some other small changes I forgot
Nov-19
* Complete re-build. Hopefully some of the issues from the last build are gone
* Cherry-pick: A few misc audio fixes to try and fix skipping playback of flac audio
* Cherry-pick: Superuser while using ART should be fixed now
* Cherry-pick: av : squashed update of changes from CAF
* Cherry-pick: Lockscreen : Customizable shortcuts
* Cherry-pick: QuickSettings : Port from cm-10.2 (WIP)
* Cherry-pick: QuickSettings : Swipe to switch
* Cherry-pick: Framework : Improve notification shade auto-collapse code
* Cherry-pick: Framework : Make notification-shade-collapse-after-dismiss behaviour configurable
* Cherry-pick: QuickSettings: Update all QS drawables to fit KitKat
Note: i would do a full wipe. and install the pa_gapps MODULAR package. its linked to in the DL section... the Full version install google keyboard and it conflicts with AOSP
ChronicKernel
Kernel now based on Bruce's kernel with a few changes by me, including:
* ION Support
* Compiled with linaro
* Set flash to disable if battery is below 10% to prevent the random shut-off when taking a pic
* Removed/Disabled KSM
* Removed ZRAM
* User-configurable GPU OC (Not OC'd by default)
* Optimized and compiled with with the "Optimize a lot, or -o3 option)
* Added more I/O schedulers
* Tweaked voltages a bit
* Reverted CRT hack to smooth animation in Android 4.2.2+
* PM_FAST enabled by default (high power wi-fi when screen is off)
These settings were changed by me to help make the kernel more stable with our ROM, observed with tests by me. If you want more features of the Sultan kernel feel free to flash it, but support will not be provided in this thread.
Other Features of the kernel include:
* OC to 1866Mhtz (default 1566Mhtz)
* Undervolted
* User-configurable CPU OC
* User-configurable CPU default governor (ondemand = default)
* User-configurable I/O scheduler (default = SIO)
* User-configurable badass gonvernor (default = balanced)
* Sweep2Wake
You can edit many of the settings in /system/etc/init.d/99kernel, here is a snippet of the script with all the config options
Kernel init script: Click Show Content to expand
Code:
#Script originally made by Axetilen. Modified by Sultan (android1234567)
#Updated for albinoman887's ChronicKernel (98% of the credit goes to android1234567. Thanks so much man :)
# Configure your options here #
# Config default CPU Gonvernor (Disabled by default: When disabled uses internal Kernel setting)
# For better battery life switch to badass
# Kernel Default: ondemand
# Possible values
# badass
# ondemand
# interactive
#= lagfee
# performance
GOV=ondemand;
# Config I/O scheduler
# deadline
# cfq
# noop
# vr
# sio (default)
IO=sio;
# Config CPU max frequency
# Default: 1566000 (1566Mhtz)
# Overclockable to - 1836000 (1836Mhtz)
# for badass set to 1566mhtz (best performance/battery life)
MAXFREQ=1566000;
# Config CPU min frequency
# Default: 384000 (384Mhtz)
# Range 384000 - 1944000 (384Mhtz - 1944Mhtz)
MINFREQ=384000;
# Config 3D GPU clock
# 228571000 = 228mhz
# 266667000 = 267mhz (default)
# 300000000 = 300mhz (Recomended For balance of Performance and Battery life)
# 320000000 = 320mhz
GPU=266667000;
# Config 2D GPU clock
# 145455000 = 145mhz
# 160000000 = 160mhz
# 200000000 = 200mhz (default)
# 228571000 = 228mhz (Recomended For balance of Performance and Battery life)
# 266667000 = 267mhz
DD=200000000;
# Badass
# possible values
# 1 = performance
# 2 = balanced
# 3 = battery saving
BADASS=2
# Enable Sweep2Wake
# 0 = disabled (default)
# 1 = enabled
# 2 = enabled (with no button backlight during sweep)
SWEEP=0
# Enable Fastcharge
# 0 = disabled
# 1 = substitute AC to USB charging always
# 2 = substitute AC to USB charging only if there is no USB peripheral detected
FASTCHARGE=0;
# Fsync Control
# Disabled by default (recomended)
# 2 = Fsync disabled
# 1 = Fsync enabled
FSYNC=2;
# TUN
# Disabled by default
# 0 = Disabled
# 1 = Enabled
TUN=0
# End of configurable options #
Please note this is not the full script just a small portion, Check /system/etc/init.d/99kernel for the full script
Team Hydra Github (main): https://github.com/Team-Hydra
CyanogenMod Github: https://github.com/CyanogenMod
ROM : cm-11-20140424-UNOFFICIAL-pyramid.zip
GAPPS: : PA GAPPS
Goo.im Repo : HERE
EXP: http://www.chronic-buildbox.com/cm-11-20140506-UNOFFICIAL-pyramid.zip
* This ROM can also be downloaded directly with GooManager *
Nightlies
[*] Below is a link to unofficial nightly builds. These are snapshots of source at time of compile and may be unstable/unusable and not supported
PYRAMID NIGHTLIES
...............

YEah!!

Wow. This was unexpected . Thank you so much!
PS: what does the " * " at the SD card mounting stand for?

Thanks Albinoman

and it begins

Fifth Place!

And the game begins Thank you, albinoman887 for not quitting developing for our phone.

No need for a reboot between flashing ROM and flashing GAPPS?

Downloading all packets. Thanks...
Edit: Got freeze with every possible ways.

Does AndroidRunTime work?

No bugs omg
What's the new features in kitkat?
Thankyou
Sensation never dies
Sent from my HTC Sensation Z710e using xda app-developers app

Very2 Great! Nice to see cm11 on our senny
Sent from my HTC Sensation XE with Beats Audio Z715e using Tapatalk

Nice Work тнαηкѕ Albino :good:

omg... nice...
was wandering when you'd bring us 4.4.
downloading now.
anyone - any bugs yet?

OMG OMG OMG
You're Damn FAST!
GREAT JOB!
And no bugs? D:
Sent from my AWESOME Ponified HTC Sensation using Tapatalk
"Loyalty and friendship, which is to me the same, created all the wealth that I've ever thought I'd have"
-Ernie Banks

After boot, Unfortunately, the process com.google.process.gapps has stopped. And thats all...

slewi said:
After boot, Unfortunately, the process com.google.process.gapps has stopped. And thats all...
Click to expand...
Click to collapse
+!
and freezing phone.

Thanks bro for cm11.

not work for me just freezing...

[Discontinued]

[Discontinued]

---

Colour controls. Cool

Thanks I will test this kernel the whole day tomorrow.
but first impression is that micro stutter with intelli plug is gone? How did you do that
With intelli plug on with faux kernels there was just too much micro stutter. Nice work man !

Hey there, does this kernel support wifi mac settings? (like if you edit /efs/wifi/macinfo.txt) - this is a kernel feature, but the stock samsung kernel does not support it. (simply ignores the macinfo.txt)
See this for more info:
http://forum.xda-developers.com/showthread.php?t=1878506

where to access colour controls not able to find in trickster or faux not able to get the screen as in screenshot above

Awesome Kernel
Wootever said:
Features:
* ARM unaligned access enabled
* BFQ/SIO/FIOPS/ROW schedulers
* Compiled with Linaro toolchain 4.8.2
* Color Control (RGB/CMY/KW)
* CPU Overclock (up to 2.5ghz)
* Dynamic FSync
* exFAT support
* Faux Soundcontrol
* Intelli Plug
* Intellidemand
* Intelli Thermal monitor
* Kernel AIO optimization
* Linux kernel 3.4.74
* PM kernel driver
* Simple GPU Governor
* TCP Westwood as default
* Updated interactive governor
* Updated libraries with optimized kernel functions
* Updated LZO algorithms
* USB fast charge
* UV control
* Various fixes from qualcomm​
Note: To access all kernel settings you need FauxClock or TricksterMod.
Display control:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download:
(hlte-custom-01) [N9005]​
Changelog:
Code:
- release 01
* initial release
Thanks to:
AndreiLux
faux123
imoseyon
yank555-lu
Source
Click to expand...
Click to collapse
Thank you for this brilliant kernel. Everything is working perfectly. No boot issues or micro pauses, just a smooth and responsive interface. Most impressive.

Default App
bhasg1007 said:
where to access colour controls not able to find in trickster or faux not able to get the screen as in screenshot above
Click to expand...
Click to collapse
This is default app that is automatically installed after you flash the kernel plz check ur apps menu,

This Kernel look cool
Does it will conflict with this MOD .... VulpiX http://forum.xda-developers.com/showthread.php?t=2429923
(I just install VulpiX on my CivZ lastest ROM)
[edited]
Got boot loop......
1. Lastest Omega ROM
2. Flash this kernel .... OK
3. Flash VulpiX mod ...... Boot loop

please add your kernel to kernels page:
http://forum.xda-developers.com/galaxy-note-3#kernels
i don't know how
----
is this kernel ADBD Insecure?
EDIT:
WOOW, Just WOW
Edit2:
Really, First Kernel for N9005 That i'm Happy With it
Finally a Kernel with No Bug/No Issue...
Works perfect With adbd insecure app... (stock didn't work)

N9005, Omega 3.1.
Camera work fine, NFC work.
Intellidemand + row. Standard frequences and voltage.
Wow!!!

?????
ps000000 said:
This Kernel look cool
Does it will conflict with this MOD .... VulpiX http://forum.xda-developers.com/showthread.php?t=2429923
(I just install VulpiX on my CivZ lastest ROM)
Click to expand...
Click to collapse
How would anyone know you simply install and share the results:fingers-crossed:

@zroice
Will be added on the next kernel build version.
I also build a WIP interface for the touchwake controls made by Yank555.lu.

Wootever said:
@zroice
Will be added on the next kernel build version.
I also build a WIP interface for the touchwake controls made by Yank555.lu.
Click to expand...
Click to collapse
Is SYNAPSE your own made app?
And BTW, Im using your kernel now 8 hours!
Usage: 8 Hours Standby and 1 hour and 23 minutes screen on time 82% left.
Intelli plug / Intellidemand / Row / Stock freq and voltages / PM suspend
AMAZING!
Only what I see is micro stutters with intelli plug.

Smooth as butter no lag
So far the smoothest experience I had with any kernel using default settings (Ondemand):good:
Will check battery life tonight and tomorrow, keep up the good work

Smoothingly Awesome...!!!
As of now I am getting great performance from kernel, looking forward to much more.

Zlatan9. said:
Is SYNAPSE your own made app?
Click to expand...
Click to collapse
Synapse was created by @AndreiLux.
Zlatan9. said:
[...] Intelli plug / Intellidemand / Row / Stock freq and voltages / PM suspend [...]
Only what I see is micro stutters with intelli plug.
Click to expand...
Click to collapse
Please try Interactive governor instead, as it is updated with recent optimizations/fixes from codeaurora it should perform noticeable better.

Wootever said:
Synapse was created by @AndreiLux.
Please try Interactive governor instead, as it is updated with recent optimizations/fixes from codeaurora it should perform noticeable better.
Click to expand...
Click to collapse
No, also with interactive it has micro stutters.
MP decision : intellidemand/ interactive = NO MICRO STUTTER
Intelli plug : intellidemand/interactive = MICRO STUTTERS

Really, First Kernel for N9005 That i'm Happy With it
Finally a Kernel with No Bug/No Issue...
Works perfect With adbd insecure app... (stock didn't work)

Oh my god! So many kernel I try. This kernel is unbelievable crazy smooth! Wow!
Thanks for this awesome kernel!

[KERNEL][S4][SENSE][4.2.2][24Mar] BubbaSense Kernel

Disclaimer:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed.
* YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
* blah blah blah you get the point.
*/​
1# post: Disclamer - special thanks
2# post: Current release & source
3# post: FAQ - bugs - future features
Donator List: (huge thanks for support)
here
Suggested kernel control app: trickstermod
[GUIDE]How to compile a kernel
Credits and Thanks:
pirlano (for base)
flar2 (for some patches)
showp-1984 (for s2w)
XDA:DevDB Information
[Sense] BubbaSense , a Kernel for the HTC One S
Contributors
rmbq
Kernel Special Features:
Version Information
Status: Beta
Current Beta Version: 24Mar
Beta Release Date: 2014-03-24
Created 2014-03-22
Last Updated 2014-03-24

Reserved
Features:
Based on linux 3.4.82
Compiled with linaro toolchain 4.8.3 2014.02 optimized for cortex-a15
Linaro -O3 optimization
avaiable CPU governors: ondemand, performance, powersave, intellimand, interactive
avaiable GPU governors: ondemand, performance
avaiable schedulers: row, deadline, noop, cfq, fiops, sio
Sleepy Plug
NTFS read & write support
exfat support
BLN
Sweep2Wake
Double tap 2 wake
Pocket detection
Improved alghorithm: SHA1, AES, SQRT, lib/string (glibc version), lib/memcopy (glibc version), XOR (NEON)
fastcharge
Changelog:
Code:
[MAR 24 2014]
disabled some module
reverted some mutex patches
[MAR 23 2014]
tune sleepy_plug for sense rom
sync ondemand up to CAF
added interactive governor and set it as default
mutex and rwsem patches
NEON mode support
NEON accelerated XOR
vfp patches
change soft buttons and touchscreen sysf entrypoint
[MAR 22 2014]
first release
Consider a donation if you like my work
READ BEFORE DOWNLOAD
flash zip files only if you are S-OFF, otherwise read FAQ
VIPER users: before flasing disable PnPMgr and check "apply settings on boot"
Download:
androidfilehost folder: http://www.androidfilehost.com/?w=files&flid=13103
(if you don't see the new version just wait some minutes, it's uploading)
Kernel Source: Github

Reserved
FAQ​Q: I plugged in my pen drive but i can't found it
A: look in /mnt/usbdisk folder.​Q: What's and how i enable/disable fastcharge?
A: with fast charge an USB charger will recognized as AC charger. it won't charge your phone faster with an AC charger. it may not charge your phone faster with an USB charger.
with the usb cable UNPLUGGED edit /sys/kernel/fast_charge/force_fast_charge:
0 -> disable
1 -> enable
than plug in the cable​Q: i've got random reboots, what do you need?
A: first read here
write this info:
kernel version
ROM
governor
scheduler
undervolted? if yes don't undervolt
QV version? if no use it
last_kmsg
Q: what's BLN and how i enable/disable it?
with BLN on when you received a notify the soft key will blink.
to enable/disable edit /sys/class/leds/button-backlight/blink_buttons:
0 -> disable
1 -> enable​Q: what's s2w and how i enable/disable it?
Sweep2wake allows you to wake up your device by swiping your finger across the capacitive buttons from left to right. Swiping from right to left will put it back to sleep (sweep2sleep).
to enable/disable edit /sys/android_touch/sweep2wake:
0 -> disable
1 -> enable​Q: what's dt2w and how i enable/disable it?
DoubleTap2Wake (DT2W) allows you to wake the device by double tapping the capacitive buttons.
to enable/disable edit /sys/android_touch/doubletap2wake:
0 -> disable
1 -> enable​What's sleepy_plug and how can i activate/deactivate it?
sleepy plug it's an hotplug driver (it decide when turn on the second core) i wrote. it's an experimental driver and it may have got performance problem. if you notice some decrease in performance report it.
to enable/disable edit /sys/module/sleepy_plug/parameters/sleepy_plug_active:
0 -> disable
1 -> enable​Install instruction:​S-OFF:
- flash awesome kernel cleaning script: http://d-h.st/HDi (optional)
- flash the zip in recovery​S-ON:
Linux:
- flash awesome kernel cleaning script: http://d-h.st/HDi (optional)
- flash the zip in recovery (obsolete, for older kernels with modules outside built outside)
- use zImage switcher to make a new boot.img
-
Code:
fastboot flash boot newBoot.img
Windows: (don't ask me how it works or everything else, i don't know and they have got tutorials on their site)
- repack your ROM boot.img with mine zImage using Virtuous Ten Studio http://www.virtuous-ten-studio.com/index.php/downloads
-
Code:
fastboot flash boot newBoot.img
BUGS:​
FUTURE:​
all features you can find in AOSP bubba kernel
kernel for sense 5.5 and android 4.3 (waiting new liberty rom release)
If you want to use my kernel for your ROM just use it and cit me in credits

When I click on the link it tells me that access is denied to the page. I'm not sure if that is because it just hasn't uploaded yet or because of something else. But I just wanted to let
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
you know.
Sent from my HTC One S using Tapatalk

leald said:
When I click on the link it tells me that access is denied to the page. I'm not sure if that is because it just hasn't uploaded yet or because of something else. But I just wanted to let
you know.
Sent from my HTC One S using Tapatalk
Click to expand...
Click to collapse
retry now!

rmbq said:
retry now!
Click to expand...
Click to collapse
It works! Thanks
Sent from my HTC One S using Tapatalk

well done. good job! thanks

BUG: worck only first core

Maksim_ka said:
BUG: worck only first core
Click to expand...
Click to collapse
i don't think so, i tested it before release... are you sure?

rmbq said:
Features:
Based on linux 3.4.82
Compiled with linaro toolchain 4.8.3 2014.02 optimized for cortex-a15
Linaro -O3 optimization
avaiable CPU governors: ondemand, performance, powersave, intellimand
avaiable GPU governors: ondemand, performance
avaiable schedulers: row, deadline, noop, cfq, fiops, sio
Sleepy Plug
NTFS read & write support
exfat support
BLN
Sweep2Wake
Double tap 2 wake
Pocket detection
Improved alghorithm: SHA1, AES, SQRT, lib/string (glibc version), lib/memcopy (glibc version)
fastcharge
Changelog:
Code:
[MAR 22 2014]
first release
Consider a donation if you like my work
Download:
androidfilehost folder: http://www.androidfilehost.com/?w=files&flid=13103
(if you don't see the new version just wait some minutes, it's uploading)
Kernel Source: Github
Click to expand...
Click to collapse
HI.
hboot versions?

jis251 said:
HI.
hboot versions?
Click to expand...
Click to collapse
both

rmbq said:
both
Click to expand...
Click to collapse
HI.
And THX for quick reply.
I'll try

Thx for your work, it's great to see such a resurgence of interest from devs in this device !

False thread

Hai96 said:
False thread
Click to expand...
Click to collapse
what do you mean?

for me it's up
http://i59.tinypic.com/2z3t014.png

rmbq said:
for me it's up
http://i59.tinypic.com/2z3t014.png
Click to expand...
Click to collapse
what rom you use?

Maksim_ka said:
what rom you use?
Click to expand...
Click to collapse
viper 3.1.2. i forgot to write in OP to flash zips only if you are S-OFF. are you S-OFF?

rmbq said:
viper 3.1.2. i forgot to write in OP to flash zips only if you are S-OFF. are you S-OFF?
Click to expand...
Click to collapse
yep, S-Off. But i use maximus HD

[CLOSED][Kernel][mido] ReVolt Kernel [Los/Aosp]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your Warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards, dead dogs, or cats,
* but i'm very interest in thermonuclear war, so if you point the finger
* at me for messing up your device just because this kernel, I will
* send you to the mars with Nuclear Rocket. Act accordingly.
* I know this paragraph is conspiracy-included, so
* dont ask about it. Welcome.
*/
ReVolt Kernel For Redmi Note 4​
Features :
--Upstream to 3.18.99 & based on LA.UM.6.6.r1-06700-89xx.0 caf tag
--Android O (8.0&8.1) only
--New display supported
--Compiled with Linaro 7.x A53 tool-chain
--Optimized for msm8953 chip
--KCAL color control
--Sound control
--Pdesire audio drivers
--GPU boost added
--Virtual memory : KSM,ZRAM, ZCACHE & FONT SWAP
--Misc : Dynamic Fsync, Arch Power,CRC & Gentle fair sleepers toogle
--Added Intelitermal solution
--I/O SCHEDULERS :FIOPS,MAPLE,SIO,BFG,CFQ,deadline,noop
--Gpu oc to 750 MHz [removed]
-- Governor :Blue_active,,chill,relaxed ,conservative, ondemand, userspace, powerspace, interactive, performance.
--Tweaked interactive /electron governor
--Early suspend driver
--Vibration intensity control
--F2FS support
--Fingerprint sensor boost driver
--exFAT Support
--Disabled CRC check (up to 30% faster I/O)
--Blocked many wakelocks
--USB fast charge
--KSM optimization
--Zram optimization
--random updated to 4.2
--Frandom number generator
--HZ 100 for best performance
--HW 32,chacha20poly1305,poly1305 & SHA256 cypto support
--Load average fix
--Optimized SHA256
--Nvidia power saving tunnigs
--Ardeno idler
--Lazyplug hotplug [removed]
--Power suspend
--Quick wakeup
--USB fast charge 2.0
--KCAL color control
--Wireguard support
--Gestures :
*Swipe to wake
*Swipe to sleep
*Double tap to wake
--Boeffla wakelocker
-- TCP congestion algorithm : bic,cubic, htcp, highspeed, vegas, reno, scalable, lp, , illinois, Westwood,hybla,veno,yeah
--spectrum support
--Works in both AOSP/LineageOS based ROMs
--General Performance & Battery life optimizations
And more you can find on my GitHub in commits
DOWNLOADS on this post ​
Credits :
- LINUS for the sources
- @LordArcadius
- @DroidTug
[email protected]
- @franciscofranco
[email protected]
[email protected]
[email protected]
- @Arnav Gosain​
-all the other developers from i cherry-picked commits
-all the other testers:silly:
For support join our telegram group
ReVolt group
Requirements
*Mido
*Working brain
*Basic understanding on how to read things
*Capability to use Google.com
*Not messing things up ,just to look cool
XDA:DevDB Information
[Kernel][mido] ReVolt Kernel [Los/Aosp], Kernel for the Xiaomi Redmi Note 4
Contributors
Boomshiva, NATO66613
Source Code: https://github.com/kondors1995/android_kernel_xiaomi_msm8953
Kernel Special Features: Compiled with Linaro 7.x A53 tool-chain && Optimized for msm8953 chip
Version Information
Status: Stable
Current Stable Version: O-R-20
Stable Release Date: 2018-03-17
Created 2017-10-22
Last Updated 2018-03-17

DOWNLOADS​
Nougat {dropped support }
Oreo

Changelogs
17/03/2018
Code:
*upstream to 3.18.99
*updated to caf LA.UM.6.6.r1-06700-89xx.0.xml
*compiled with my own uber tc gcc 7.3
*Added YouTube crash fix
*Added features back (based on v19)
08/03/2018
Code:
*Upstreamed to 3.18.98
*prima updated to caf LA.UM.6.6.r1-06500-89xx.0
*Switched camera stack from old mido N to caf LA.UM.6.6.r1-06500-89xx.0* (latest Oreo caf)
*Changed Ardeno idler implementation to use display state api instead of state notifier api
*Sources based on omni sources
*Fixed youtube issues (as reported by users )
*Few features like spectrum support , few TCP algorithm , others removed as its initial build, will be added later
*Misc changes
27/02/2018
Code:
Updated to 3.18.96
Updated sdcardfs
Few improvement for battery conservation
25/02/2018
Code:
Updated to 3.18.95
f2fs: updates on v4.16-rc1
Added Speck cipher support
HZ set to 1000
Improved charging
Updated QNS system
improvements to ARCH power & gentle fair sleepers
Improved Impedance detection;
Improved Sampling formats;
Improved Samplerates;
Improved SoundControl;
Added some sound tables.
Added Intelitermal V3 optimized
10/02/2018
Code:
Updated to 3.18.94
GPU improvements
Enabled D2W
Improved D2W & SW2 responsiveness
Touch-sensor improvements
Updated mm controller
07/02/2018
Code:
*Omnivision cam fix
*Binder switched to aosp
*Misc fixes and optimization
05/02/2018
Code:
*updated prima
*sdcardfs
*cpuidle improvments
*and many misc changes
03/02/2018
Code:
Updated to caf LA.UM.6.6.r1-06200-89xx.0
updated F2FS for batery life
Some GPU stuff
Misc changes
Batery life improvents
01/02/2018
Code:
updated to 3.18.93
misc AOSP changes
Boeffla wakelock blocker ( war against deepsleep):p
And few optimisation here and there for better user experience .
23/01/2018
Code:
)Addressed deep sleep issue and included a possible fix for that.
2)sorted out system has been destroyed issue
20/01/2018
Code:
Upstreamed to 3.18.92
Updated f2fs
Merge aosp changes to arm64
Misc updates
16/01/2018
Code:
Cpu boost
Arm64 instructions updates
Added gestures (swipe gesture) wake /sleep
Improved fp responsiveness
And many more fixes under the hood
05/01/2018
Code:
Fix for new display
Upstreamed to 3.18.91
Caf updates
Updated bfq to r8v12
Reverted many dts changes doe to reported cam / boot issues
Many more misc fixes
02/01/2018
Code:
upstreamed to 3.18.90
Caf updates
Updated DTS
misc fixes
Rebased to new sources
More Oreo optimization.
Interactive set as default
24/12/2017
Code:
Upstreamed to 3.18.89
Updated AOSP sources
Updated CAF tags
Added all remaining features from nougat
Fixed hdr
F2FS updated
Added RCU boost
Optimized adreno idler
Made changes in adreno boost
Updated ZRAM && swap
Improved memory management
Improved ram management && optimized for performance
Updated battery profile in spectrum
Added WIREGUARD support
15/12/2017
Code:
kernel is rebased on oreo base (works with nougat too) and optimized
updated to 3.18.87
It works on Oreo roms 8.0 /8.1
baseed of LA.UM.6.6.r1-04500-89xx.0 caf tag
Removed multiple features to debloat kernel
Tunned more for msm8953 chipset
updated devfreq ( GPU drivers)
updated cpuidle (cpu powersaving stuff)
19/11/2017
Code:
Updated to 3.18.82
Fixed krack vulnerability
Updated prima driver
Led drivers [new drivers]
18/11/2017
Code:
updated to 3.18.81
Updated cypto from according to 3.18 aosp changes
updated CAF to LA.UM.5.6.r1-06300-89xx.0
Led drivers fixed[old drivers] ..(notification light works now )

Manuals && Announcement:
Installation instructions:
download the kernel from above links (post 3)
Boot to twrp
flash the zip
reboot
If coming from another custom kernel :
Extract the boot.img from your current rom zip
boot to twrp
flash the extracted boot.img
flash the kernel (revolt kernel zip)
flash magisk or super su (optional )
reboot
swipe gestures
Watch a video how it works (reference is of one plus ) :
https://www.youtube.com/watch?v=UvyUJxna-1E
How to take logs ?
Check the below thread
https://forum.xda-developers.com/showthread.php?t=2185929
General flashing way
This is how u should flash stuff
Rom+gapps+root+mods(sound,kernel etc )
When flashing stock kernel
Kernel +root
Flashing custom kernel after stock
Stock kernel +root+custom kernel
Check the zip is corrupt or not my comparing the md5(available on afh )
Still if U are getting system destroyed then check what u have done wrong .
Like
1) what magisk modules u guys are using
2) xposed is there or NOT
3)data is encrypt or not
4) mount system partition issues
5) outdated recovery
5)changed system file partition

Good Job @Kevin Saiza

Reserved

If it's the same kernel source from Soviet kernel, it probably has the MTP bug. Takes always connecting to MTP. Also the boot animation hangs a little bit in the start. I am not sure about this one specifically. But from the looks of it seems to be the same kernel.

Going to test now!
Do the OC-s are overvolting, or 2.2 GHz uses the same voltage which uses 2.0GHz? And the GPU oc?

MIUI MM supported ??

Work on RR rom

magnum_2007 said:
If it's the same kernel source from Soviet kernel, it probably has the MTP bug. Takes always connecting to MTP. Also the boot animation hangs a little bit in the start. I am not sure about this one specifically. But from the looks of it seems to be the same kernel.
Click to expand...
Click to collapse
To fix MTP , Add this to build.prop and report .

kaushal_1711 said:
MIUI MM supported ??
Click to expand...
Click to collapse
Only for Nougat & Oreo

david kapek said:
Work on RR rom
Click to expand...
Click to collapse
Spectrum support is also present . You can use that too .

holozis_HUN said:
Going to test now!
Do the OC-s are overvolting, or 2.2 GHz uses the same voltage which uses 2.0GHz? And the GPU oc?
Click to expand...
Click to collapse
No Over volting

Kevin Saiza said:
To fix MTP , Add this to build.prop and report .
Click to expand...
Click to collapse
What to add in build.prop ?
Sorry its in op saw r8 now

david kapek said:
Work on RR rom
Click to expand...
Click to collapse
Should work on RR and all custom Nougat and Oreo roms

itsRJT said:
What to add in build.prop ?
Click to expand...
Click to collapse
Add The code in OP

Folder in miui is blank

Wow. Thanks man for many features. i glad for see hotplug kernel. But not work on my aosp rom lazyplug.

exodius48 said:
Folder in miui is blank
Click to expand...
Click to collapse
As soon as kernel is tested it will be uploaded .