Database Info

[KERNEL][S4][SENSE][4.2.2][24Mar] BubbaSense Kernel

Disclaimer:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed.
* YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
* blah blah blah you get the point.
*/​
1# post: Disclamer - special thanks
2# post: Current release & source
3# post: FAQ - bugs - future features
Donator List: (huge thanks for support)
here
Suggested kernel control app: trickstermod
[GUIDE]How to compile a kernel
Credits and Thanks:
pirlano (for base)
flar2 (for some patches)
showp-1984 (for s2w)
XDA:DevDB Information
[Sense] BubbaSense , a Kernel for the HTC One S
Contributors
rmbq
Kernel Special Features:
Version Information
Status: Beta
Current Beta Version: 24Mar
Beta Release Date: 2014-03-24
Created 2014-03-22
Last Updated 2014-03-24

Reserved
Features:
Based on linux 3.4.82
Compiled with linaro toolchain 4.8.3 2014.02 optimized for cortex-a15
Linaro -O3 optimization
avaiable CPU governors: ondemand, performance, powersave, intellimand, interactive
avaiable GPU governors: ondemand, performance
avaiable schedulers: row, deadline, noop, cfq, fiops, sio
Sleepy Plug
NTFS read & write support
exfat support
BLN
Sweep2Wake
Double tap 2 wake
Pocket detection
Improved alghorithm: SHA1, AES, SQRT, lib/string (glibc version), lib/memcopy (glibc version), XOR (NEON)
fastcharge
Changelog:
Code:
[MAR 24 2014]
disabled some module
reverted some mutex patches
[MAR 23 2014]
tune sleepy_plug for sense rom
sync ondemand up to CAF
added interactive governor and set it as default
mutex and rwsem patches
NEON mode support
NEON accelerated XOR
vfp patches
change soft buttons and touchscreen sysf entrypoint
[MAR 22 2014]
first release
Consider a donation if you like my work
READ BEFORE DOWNLOAD
flash zip files only if you are S-OFF, otherwise read FAQ
VIPER users: before flasing disable PnPMgr and check "apply settings on boot"
Download:
androidfilehost folder: http://www.androidfilehost.com/?w=files&flid=13103
(if you don't see the new version just wait some minutes, it's uploading)
Kernel Source: Github

Reserved
FAQ​Q: I plugged in my pen drive but i can't found it
A: look in /mnt/usbdisk folder.​Q: What's and how i enable/disable fastcharge?
A: with fast charge an USB charger will recognized as AC charger. it won't charge your phone faster with an AC charger. it may not charge your phone faster with an USB charger.
with the usb cable UNPLUGGED edit /sys/kernel/fast_charge/force_fast_charge:
0 -> disable
1 -> enable
than plug in the cable​Q: i've got random reboots, what do you need?
A: first read here
write this info:
kernel version
ROM
governor
scheduler
undervolted? if yes don't undervolt
QV version? if no use it
last_kmsg
Q: what's BLN and how i enable/disable it?
with BLN on when you received a notify the soft key will blink.
to enable/disable edit /sys/class/leds/button-backlight/blink_buttons:
0 -> disable
1 -> enable​Q: what's s2w and how i enable/disable it?
Sweep2wake allows you to wake up your device by swiping your finger across the capacitive buttons from left to right. Swiping from right to left will put it back to sleep (sweep2sleep).
to enable/disable edit /sys/android_touch/sweep2wake:
0 -> disable
1 -> enable​Q: what's dt2w and how i enable/disable it?
DoubleTap2Wake (DT2W) allows you to wake the device by double tapping the capacitive buttons.
to enable/disable edit /sys/android_touch/doubletap2wake:
0 -> disable
1 -> enable​What's sleepy_plug and how can i activate/deactivate it?
sleepy plug it's an hotplug driver (it decide when turn on the second core) i wrote. it's an experimental driver and it may have got performance problem. if you notice some decrease in performance report it.
to enable/disable edit /sys/module/sleepy_plug/parameters/sleepy_plug_active:
0 -> disable
1 -> enable​Install instruction:​S-OFF:
- flash awesome kernel cleaning script: http://d-h.st/HDi (optional)
- flash the zip in recovery​S-ON:
Linux:
- flash awesome kernel cleaning script: http://d-h.st/HDi (optional)
- flash the zip in recovery (obsolete, for older kernels with modules outside built outside)
- use zImage switcher to make a new boot.img
-
Code:
fastboot flash boot newBoot.img
Windows: (don't ask me how it works or everything else, i don't know and they have got tutorials on their site)
- repack your ROM boot.img with mine zImage using Virtuous Ten Studio http://www.virtuous-ten-studio.com/index.php/downloads
-
Code:
fastboot flash boot newBoot.img
BUGS:​
FUTURE:​
all features you can find in AOSP bubba kernel
kernel for sense 5.5 and android 4.3 (waiting new liberty rom release)
If you want to use my kernel for your ROM just use it and cit me in credits

When I click on the link it tells me that access is denied to the page. I'm not sure if that is because it just hasn't uploaded yet or because of something else. But I just wanted to let
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
you know.
Sent from my HTC One S using Tapatalk

leald said:
When I click on the link it tells me that access is denied to the page. I'm not sure if that is because it just hasn't uploaded yet or because of something else. But I just wanted to let
you know.
Sent from my HTC One S using Tapatalk
Click to expand...
Click to collapse
retry now!

rmbq said:
retry now!
Click to expand...
Click to collapse
It works! Thanks
Sent from my HTC One S using Tapatalk

well done. good job! thanks

BUG: worck only first core

Maksim_ka said:
BUG: worck only first core
Click to expand...
Click to collapse
i don't think so, i tested it before release... are you sure?

rmbq said:
Features:
Based on linux 3.4.82
Compiled with linaro toolchain 4.8.3 2014.02 optimized for cortex-a15
Linaro -O3 optimization
avaiable CPU governors: ondemand, performance, powersave, intellimand
avaiable GPU governors: ondemand, performance
avaiable schedulers: row, deadline, noop, cfq, fiops, sio
Sleepy Plug
NTFS read & write support
exfat support
BLN
Sweep2Wake
Double tap 2 wake
Pocket detection
Improved alghorithm: SHA1, AES, SQRT, lib/string (glibc version), lib/memcopy (glibc version)
fastcharge
Changelog:
Code:
[MAR 22 2014]
first release
Consider a donation if you like my work
Download:
androidfilehost folder: http://www.androidfilehost.com/?w=files&flid=13103
(if you don't see the new version just wait some minutes, it's uploading)
Kernel Source: Github
Click to expand...
Click to collapse
HI.
hboot versions?

jis251 said:
HI.
hboot versions?
Click to expand...
Click to collapse
both

rmbq said:
both
Click to expand...
Click to collapse
HI.
And THX for quick reply.
I'll try

Thx for your work, it's great to see such a resurgence of interest from devs in this device !

False thread

Hai96 said:
False thread
Click to expand...
Click to collapse
what do you mean?

for me it's up
http://i59.tinypic.com/2z3t014.png

rmbq said:
for me it's up
http://i59.tinypic.com/2z3t014.png
Click to expand...
Click to collapse
what rom you use?

Maksim_ka said:
what rom you use?
Click to expand...
Click to collapse
viper 3.1.2. i forgot to write in OP to flash zips only if you are S-OFF. are you S-OFF?

rmbq said:
viper 3.1.2. i forgot to write in OP to flash zips only if you are S-OFF. are you S-OFF?
Click to expand...
Click to collapse
yep, S-Off. But i use maximus HD

[KERNEL][APR 9][GPL] SkyDragon Kernel V1.0.3

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SkyDragon Kernel for HTC M9 on stock based Rom's​
Hey all,
this Kernel is based on stock 1.32.401.6(WWE) Source code from HTC. This should work for any GSM M9, I've tested Euro and Dev with no issues whatsoever. For now this is fairly basic until we get more and updated sourced released from HTC, I'm mainly focusing on responsiveness and increased battery life at the moment, no extra features really just yet. However this is a work in progress so more will be added as we go along
Features
Code:
*Quick Wakeup
*Extra Schedulers (BFQ/SIO/FIOPS)
*Fast Charge Support
*Savoca's KCAL Control
*Powersuspend v1.5
*Frandom Support
*Arch Power
*Arch Random
*NTFS Support
*Some -O3 and graphite optimizations
*Compiled with latest Sabermod 4.9 Toolchain
How-To Install
Code:
1. Download kernel zip
2. Reboot to recovery
3. Make a nand backup
4. Flash kernel zip
5. ?????
6. Profit
Changelog
Code:
v1.0.3
*Re-Enabled CFS Bandwidth Scheduling (Better battery)
*Updated and Added SIO Scheduler
*Enabled TCP Fast Open
*Decreased fifo_batch for Deadline Scheduler
*Added opensource ExFat support
*Tweaked cpuidle for better battery
*Added Quick Wakeup driver (Better battery)
V1.0.2
*Fixed BFQ Scheduler so its available now
[strike]*Enabled CFS Bandwidth scheduling[/strike]
*Enabled Next Buddy scheduling
-- Battery should be a bit better on this one
V1.0.1
*Updated PowerSuspend to V1.5
*Updated and added FIOPS scheduler for 3.10.x Kernels
*Added Fast Charge Support
*Added Savoca's KCAL Control
V1.0
*Initial Release based on 1.32.401.6
Downloads
Code:
[B]SkyDragon V1.0.3[/B]
[b]MD5:[/b]6aa5b2b0395f00b9f086dcc705dccb5c
[URL="https://www.androidfilehost.com/?fid=95916177934553112"]AFH Mirror[/URL]
--
Previous releases can be found on my AFH page [URL="https://www.androidfilehost.com/?w=files&flid=28593"]here[/URL]
Recommended Settings
Code:
Governor: On-Demand
Scheduler: FIOPS
Read-Ahead Buffer Size: 2048
*Fauxclock only settings*
KSM/Intelli-KSM Enabled
PowerSuspend Enabled
C-States Enabled
Thanks and credits to:
Code:
Savoca
Faux123
Flar2
Captain_Throwback
Donators
Code:
My M9 Source Code
XDA:DevDB Information
[KERNEL][APR 9][GPL] SkyDragon Kernel V1.0.3, Kernel for the HTC One (M9)
Contributors
HolyAngel
Source Code: https://github.com/holyangel/m9
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2015-04-08
Created 2015-04-08
Last Updated 2015-04-09

Thanks for this! Looking forward to a little better battery

Will have an update soon here, got savoca's kcal control working and added fast charge support.. Working on a couple other things too ^^

^^

Thanks I'll give a try when you'll update....fast charge is very useful

HolyAngel said:
^^
Click to expand...
Click to collapse
IKCAL is amazing on the M8, can't wait to have it on the M9

is their a recommended app for kernel tuning ?

clsA said:
is their a recommended app for kernel tuning ?
Click to expand...
Click to collapse
I prefer Faux123 Kernel Enhancement (aka Fauxclock) for lollipop as it seems to work the best, Kernel Adiuter is decent but lacks some options. Trickstermod is good but sometimes the settings don't stick/apply all the time.
legents said:
IKCAL is amazing on the M8, can't wait to have it on the M9
Click to expand...
Click to collapse
Enjoy!
lukemo said:
Thanks I'll give a try when you'll update....fast charge is very useful
Click to expand...
Click to collapse
Updated ^^

U did it Again and Again!
Well done, great job!

Can't say I am disappointed I didn't have time to flash the 1.0 as the update is already up, thanks for the quick updates will flash this now!

HolyAngel said:
I prefer Faux123 Kernel Enhancement (aka Fauxclock) for lollipop as it seems to work the best, Kernel Adiuter is decent but lacks some options. Trickstermod is good but sometimes the settings don't stick/apply all the time.
Click to expand...
Click to collapse
Great! thanks for all your doing for my M9 I really appreciate it.
I went with the free one for now (Kernel Adiuter), I'll update to Faux tool if it looks like I'll be tuning the kernel for the life of the phone.

HolyAngel said:
I prefer Faux123 Kernel Enhancement (aka Fauxclock) for lollipop as it seems to work the best, Kernel Adiuter is decent but lacks some options. Trickstermod is good but sometimes the settings don't stick/apply all the time.
Enjoy!
Updated ^^
Click to expand...
Click to collapse
Any chance you can unlock all frequencies on processor?
Sent from my HTC One M9 using Tapatalk

bia9977 said:
Any chance you can unlock all frequencies on processor?
Sent from my HTC One M9 using Tapatalk
Click to expand...
Click to collapse
Not until we get the rest of the variant source released by HTC. The stock dtb file which houses that info is currently 4.4mb and looks to be covering most if not all of the variants, but when compiling we can only get around a ~650kb file with the current released source thats available. so if I do so it will break support for all devices.

HolyAngel said:
Not until we get the rest of the variant source released by HTC. The stock dtb file which houses that info is currently 4.4mb and looks to be covering most if not all of the variants, but when compiling we can only get around a ~650kb file with the current released source thats available. so if I do so it will break support for all devices.
Click to expand...
Click to collapse
Waiting game all over again . Thanx.
Sent from my HTC One M9 using Tapatalk

Has this improved the battery life much ??

Strangeland16 said:
Has this improved the battery life much ??
Click to expand...
Click to collapse
I'll let you know this time tomorrow

HolyAngel said:
I prefer Faux123 Kernel Enhancement (aka Fauxclock) for lollipop as it seems to work the best, Kernel Adiuter is decent but lacks some options. Trickstermod is good but sometimes the settings don't stick/apply all the time.
Click to expand...
Click to collapse
Just installed kernel and seems to be running fine so far. I bought Faux's KE.. gonna cap clocks at max 1248000/ min 384000 and see how that affects perf/battery. Recommendation on governor? Ondemand?
Thank you for your work on this!
Edit: Faux KE doesn't seem to be capping max clocks. Even after fix permissions and reboot.

not sure if this is where to ask
trying to compile - keep getting this
"Makefile:801: *** multiple target patterns. Stop."
defconfig issue? (used defconfig,sd_defconfig,msm*defconfig)
maybe my distro? (using arch, usually use gentoo)
using sabermod toolchain from their gitlab

bl00dy said:
not sure if this is where to ask
trying to compile - keep getting this
"Makefile:801: *** multiple target patterns. Stop."
defconfig issue? (used defconfig,sd_defconfig,msm*defconfig)
maybe my distro? (using arch, usually use gentoo)
using sabermod toolchain from their gitlab
Click to expand...
Click to collapse
its a makefile issue, did you change anything in there other than the second cross_compile line thats pointing to where my *personal* toolchain location is?

Chronzy said:
Just installed kernel and seems to be running fine so far. I bought Faux's KE.. gonna cap clocks at max 1248000/ min 384000 and see how that affects perf/battery. Recommendation on governor? Ondemand?
Thank you for your work on this!
Edit: Faux KE doesn't seem to be capping max clocks. Even after fix permissions and reboot.
Click to expand...
Click to collapse
yeah he needs to update the app to handle the cores and whatnot, kernel adiuter is able to downclock successfully.

[DISCONTINUED][KERNEL][OREO][MM/Nougat] Evolution Kernel [Falcon][2018/03/17]

Hi guys, I have proposed to make a kernel for the falcon and here they have it <3
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Old builds:
http://pastebin.com/kDiQ8Hrr
Evolution Kernel -R6 build for MM Roms:
-Evolution_Kernel-R6 is unified for MM roms[/B], CM13/AOSP6/
- Linux code updated to lastest LineageOS source: 3.4.113
- Based on a new clean source for greater stability
- Compiled with LinaroTC 4.9 optimized cortex A7
- Many optimization for memory usage and reduce Lag
- Added TCP modes like westwood
- Lzma compression (very nice)
- No more useless mods
- Added SIO, VR, ZEN I/O schedulers
- Added toggles for wakelocks
- MSM Hotplug stable rules
- Powersuspend added and optimized
-Added Kcal v2 support
-DT2W/S2W features
-Selinux enabled in permissive mode by default
-WQ Power Efficient tweaks
-State notifier driver added
-Fix some memory leaks
-Many more optimizations for performance and battery saving (check source)
Important: use the kernel adiutor application to tune
Click to expand...
Click to collapse
Download:
https://www.androidfilehost.com/?fid=745425885120710252
**No mirrors please**
Click to expand...
Click to collapse
How to install:
-Paste the zip on internal memory
-Install zip with twrp recovery
-Reboot and Enjoy :good:
Click to expand...
Click to collapse
New Build Evolution Kernel_R10, FOR NOUGAT ROMS 7.1.x ONLY, NO MARSHMALLOW
-
Linux code updated to lastest LineageOS source: 3.4.113 :good:
- Based on a new clean source for greater stability
- Compiled with latest simple GCC 4.8 (great for this) :good:
- Some optimizations for kernel compression (lzma)
- Many optimization for memory usage and reduce Lag
- Added Customs TCP
- Lzma compression (very nice)
- No more useless mods
- Added and improved SIO, SIOPLUS, VR, ZEN v2 I/O schedulers and default BFQ, etc...
- Row I/O scheduler is recommended by me :good:
- Added toggles for wakelocks
- MSM Hotplug stable rules (Nice deep sleep Now)
- Powersuspend updated (Use in Hybrid mode)
- Kcal v2 support
-Dt2w added but does not work for the moment (disable)
- Selinux enabled in permissive mode by default
- WQ Power Efficient tweaks
- State notifier driver added
- Lcd notify driver Removed (NO MORE START SCREEN FREEZE)
- New Governors added: zzmoove, Xperience by @TeamMex , Bioshock, Lionheart and ElementalX (testing)
- Interactive and Ondemand governor updated for better efficiency
- Added Sound Control v3.6
- Fast Charge enable by default
- Fix memory leaks for better perfomance
- Many more optimizations for performance and battery saving (check source)
- New TCP congestion driver called AsCaRex by @TeamMex Added
AsCaRex employs end-to-end bandwidth measurements to set cwnd and ssthresh after packet loss. The probing phase is as the original Reno, have a modified control mechanism for use with large congestion windows. A table indicates how much to increase the congestion window when an ACK is received.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Important: Use the kernel adiutor application to tune this kernel
Evolution Turbo Kernel Oreo Updated
-Kernel build with QUVNTNN 6.4 2018.01 Custom ToolChain
-Improved Cortex-A7 configs
-Improved XZ kernel compression
-def_config regenerate
-Updated cpufreq and gpu drivers configs for better performance
-Welcome again MP_Decision Hotplug
-Spinlocks changes
-Significant lag in oreo reduced
-Simple Adreno GPU algorithm added
-New governors distribution: Default govs, XPerience, SmartMax and BioShock govs
-Out DT2W for now
-All TCP cong is activated (AsCaRex default)
-Many more changes for you..
Source: https://github.com/willizambrano/android_kernel_motorola_msm8226
If you like, support me with a small contribution : http://paypal.me/willizambrano
Download: https://www.androidfilehost.com/?fid=962187416754469095
How to install:
-Paste the zip on internal memory
-Install zip with twrp recovery
Backup of you stock boot.img
-Reboot and Enjoy :good:
If you like my work, contribute for more updates please:
Suggestions for balance perfomance/battery
-Use interactive gov with hispeedfreq on 787mhz and min freq 300mhz....
-For more conservative use Bioshock or SmartMax governor and min freq 300mhz
-Sheduler Maple, Row of BFQ
-In misc features select suspension mode on hybrid (default) and TCP select AsCaRex or westwood
Version Information
Status: Beta Evo Turbo for Oreo Roms
Release Date: 2018-03-19​

thanks for your work. i will give it a try and will feedback.

Looks promising. Gonna try it

ralp88 said:
thanks for your work. i will give it a try and will feedback.
Click to expand...
Click to collapse
Thanks bro, waiting you feedback

FortoszoneID said:
Looks promising. Gonna try it
Click to expand...
Click to collapse
Thanks , enjoy!

great piece of work

pico hackr said:
great piece of work
Click to expand...
Click to collapse
Thanks for you feedback

Running smoothly on crDroid 7.1 :good:

Can it be used with slim 7.1 ?

justbfree said:
Can it be used with slim 7.1 ?
Click to expand...
Click to collapse
Yeah, work on slim 7.1

Thanks for the work!
Keep it up
Will try and report
What is the expected SoT

willizambrano01 said:
Yeah, work on slim 7.1
Click to expand...
Click to collapse
It doesn't work , system UI FC .

Very good kernel :good:
I only miss DT2W feature..
Edit: @willizambrano01 i like your kernel, but i'm on latest CM14.1 nightly so i can't use data tethering with your kernel. Default CM kernel, tether working fine. Could you fix? Thanks

Aguys said:
Very good kernel :good:
I only miss DT2W feature..
Edit: @willizambrano01 i like your kernel, but i'm on latest CM14.1 nightly so i can't use data tethering with your kernel. Default CM kernel, tether working fine. Could you fix? Thanks
Click to expand...
Click to collapse
That wasn't Kernel problem. Tethering was broken in CM build itself. I think they have fixed in latest build.

Megatron27 said:
That wasn't Kernel problem. Tethering was broken in CM build itself. I think they have fixed in latest build.
Click to expand...
Click to collapse
But, I already on 12/10 build. With default CM kernel tethering working fine, with this kernel broken...

Can u add double tap to wake feature?

Aguys said:
But, I already on 12/10 build. With default CM kernel tethering working fine, with this kernel broken...
Click to expand...
Click to collapse
Thanks bro, I fix on next build

Allstargaurav said:
Can u add double tap to wake feature?
Click to expand...
Click to collapse
In next build bro

I'll try it soon, but which ROM do you recomend for me to use with, focusing in performance?

Best hotplug?

[KERNEL][G5][H830/H850][CM14.1]CrazySuperKernel v3.0[04-01-17]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FOR DEVS AND USERS BEFORE FIGHT ME CLICK HERE!: https://forum.xda-developers.com/showpost.php?p=70362424&postcount=3
Code:
DISCLAIMER!!
I am not responsible in any way for anything that can be happen to your device when you flashing my kernels.You do so at your own risk!
Features
Anykernel:
- Anykernel2 zip for maximum compatibility with all ROMs, CrazySuperKernel uses your existing ramdisk (Do NOT flash this over other custom kernels!You should only flash CrazySuperKernel over the kernel that came with your ROM!!)
Kernel tweaker app:
- CrazySuperKernel Adiutor (need download it from downloads)
Toolchain:
UBERTC 6.0 Toolchain [latest update]
CPU:
- governors:
elementalx
interactive
ondemand
zzmoove
ondemandplus
conservative
powersave
userspace
- input boost
IO schedulers:
bfq
tripndroid
cfq
noop
deadline
fiops
row
sio
siopilus
zen
vr
fifo
Thermal:
- msm thermal
Sound:
- Sound control
GPU:
- Adrenoboost
More:
- init.d support
- insecure kernel (adb has root privileges)
- PVS level info
- frandom
- notification led control
- kcal v2
- CRC Check Disabled
- Dynamic filesystem read-ahead
- A lot improvments
- A lot fixes
Supported Variants:
H830
H850
Download Link CrazySuperKernel [H830] [AnyKernel]:https://www.androidfilehost.com/?w=files&flid=141303
Download Link CrazySuperKernel [H850] [AnyKernel]:https://www.androidfilehost.com/?w=files&flid=141296
Download Link CrazySuperKernelAdiutor[Updated]:https://www.androidfilehost.com/?w=files&flid=139961
Installation guide
Do NOT flash this over other custom kernels!
You should only flash CrazySuperKernel over the kernel that came with your ROM!!
- Download Kernel from this thread
- Flash it with Recovery
[Wipe cache and Dalvik cache recommended]
- Then Reboot
Enjoy the CrazySuperKernel !!!!
Credits
thx Faux123
thx Savoca
thx RenderBroken
thx flar2
thx osm0sis
thx ShinyShide
thx bhb27
thx Lord Boeffla
thx the devs where made the cm14 bootable and working
thx CrazyGamerGR yeh me
XDA:DevDB Information
CrazySuperKernel, Kernel for the LG G5
Contributors
CrazyGamerGR
Source Code: https://github.com/CrazyGamerGR/CrazySuperKernel-CM14.1-G5
Kernel Special Features: check the feature list
Version Information
Status: Testing
Created 2017-01-02
Last Updated 2017-01-04

FAQ
Recommended app : CrazySuperKernel Adiutor
changelogs
v1.0/02-01-17
- initial release
v2.0/04-01-17
- update toolchain to UBERTC 6.0
- sound control
- input boost
- frandom
- msm thermal
- many improvments under the hood
v3.0/04-01-17
- many improvments under the hood
- some fixes

For users and devs!!
All my kernels are based on cyanogenmod/lineageos source ,if someone who believes" i stoled their source" i have video captures and anyone who believes something just report me and i will have the last laugh .every tweak/mod/feature i used i edited/tweaked on my own and anyone with problem just stay away. My sources are free for anyone and can be used(i saw some ppl use them already)i don't care like other devs and i am happy and proud if someone use my work(the words" i work many hours on that project" the best repeatable words(many devs without the recognized tag and not with many thanks,they have worked for many hours/days/months and they don't cry and fight other devs )if for some devs their source are so much rare and hardworked just keep them privet(their work include their name so no problem ...we are not here for the fame ...we just want to improve the devices to make them better and not to fight with each other...
Why i am telling you all these?!
I have had many kernels unreleased from fights...i will continue to new clean projects based on lineageos and i will not care much with my source to wait many days to upload them with all the history of them because 2-3 "devs" they believe i used or edited their source...i am not a popular dev but you can't believe and no one knows how many days without sleep and hours of hardwork i have done, to do all this(and many not release source/work, much more than other devs...

reserve1

reserve2

This kernel is for cm14.1 and roms based on cm. So I guess rebased LineAge OS is also supported?!? OC and UV works without loosing stability?

Does this work for Fulmics ROM(based on v20a H850)?

666misanthrop666 said:
This kernel is for cm14.1 and roms based on cm. So I guess rebased LineAge OS is also supported?!? OC and UV works without loosing stability?
Click to expand...
Click to collapse
It is for LOS yeh,i ll add more features soon,i added just the most important and stable features.

obol2 said:
Does this work for Fulmics ROM(based on v20a H850)?
Click to expand...
Click to collapse
Only for cm/los based roms m8

Any feedback how it work the first build?

First build working amazing I. H830 latest cm build thank you
Couple questions do we gotta use the included BusyBox as I prefer stericsons
And does this support drive droid ?

Dreamlogix said:
First build working amazing I. H830 latest cm build thank you
Couple questions do we gotta use the included BusyBox as I prefer stericsons
And does this support drive droid ?
Click to expand...
Click to collapse
Thx for feedback m8,you can use every busybox you want and i never used drive droid to test it.I ll add more features maybe tonight.

CrazyGamerGR said:
Thx for feedback m8,you can use every busybox you want and i never used drive droid to test it.I ll add more features maybe tonight.
Click to expand...
Click to collapse
I'll send the info here when I get home
Edit here it is
https://forum.xda-developers.com/showthread.php?t=2196707

Dreamlogix said:
I'll send the info here when I get home
Edit here it is
https://forum.xda-developers.com/showthread.php?t=2196707
Click to expand...
Click to collapse
Maybe it is included,you tried it if it work? I ll check it again in a few minutes.

It works very well. There are a couple things I've noticed though. Using the hotplug control, setting the number of cores does not stick. Also on CPU frequency maximum if you try to change core 2 or 3 the max shows 1593 MHz instead of the higher values of these cores. Also there is no GPU control. But overall it is very stable and have been using it since you released it. Looking forward to more features and thanks for your development.
T mobile h830.

jeffsga88 said:
It works very well. There are a couple things I've noticed though. Using the hotplug control, setting the number of cores does not stick. Also on CPU frequency maximum if you try to change core 2 or 3 the max shows 1593 MHz instead of the higher values of these cores. Also there is no GPU control. But overall it is very stable and have been using it since you released it. Looking forward to more features and thanks for your development.
T mobile h830.
Click to expand...
Click to collapse
Thx for feedback m8

@jeffsga88 You tried KernelAdiutor or just CSKAdiutor?

CrazyGamerGR said:
@jeffsga88 You tried KernelAdiutor or just CSKAdiutor?
Click to expand...
Click to collapse
CSKAuditir that's included in OP.

jeffsga88 said:
CSKAuditir that's included in OP.
Click to expand...
Click to collapse
Can you try plz if KA work better?

CrazyGamerGR said:
Can you try plz if KA work better?
Click to expand...
Click to collapse
Okay so using the regular kernel auditor setting CPU max for both the little and big core configuration works correctly (able to properly set max CPU speed). Also able to change GPU speed settings. But hotplugging option to change max cores not available in kernel auditor, so not sure that's fully implemented in your kernel yet? Also like your version of kernel auditor for screen settings where you can choose preset profiles. But overall the regular kernel auditor does seem to work better.

[EOL] [KERNEL][EAS][OC/nonOC][UV]KangarooX FINAL [2019-12-31][AOSP/MIUI][SPECTRUM]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The second round's time has come. I wanna present my kernel here. This kernel focuses on to be a good kernel. My motto is "I don't have motto".
Compatible ROMs:
Should work with all ROMs
Features:
Based on kernel.lnx.4.4.r37-rel CAF branch
Uptodate with latest linux kernel base
Compiled with GCC 8.3 with O3 and graphite opts
Many tracing, logging, debugging, security sh*t removed
EAS
Double tap to wake [Thanks to @vasishath]
Added a bunch of IO scheds( BFQ, tweaked maple, tweaked FIOPS, sio, anxiety)
Spectrum profiles support, can be switched with SmartPack kernel manager
KCAL support
Wakelock blocker (Thanks to @boeffla)
Added Adreno boost
WireGuard support
Headphones gain control
Microphone gain control
Best sound quality
32 bit up to 384 kHz audio playback support
DTS Headphone:X support
CPU OC to 1.8/2.2GHz
CPU/GPU UV
Xbox and PS controller support
HDR support for all whyred/wayne panels
exFAT, NTFS, F2FS support
sRGB support(you can find the custom control for smartpack in the extras folder)
Flashing instructions:
If you are using other custom kernel then at first dirty flash the ROM
Flash the kernel(OC or nonOC)
Flash the perfboost fw config module
If you experience brightness issues then flash the *255 version
Download link:
https://bit.ly/2JZLrwC
AFH mirror: https://www.androidfilehost.com/?w=files&flid=297054
Credits:
@frap129
@nathanchance
@AxelBlaz3
@Shekhawat2
@Ajmy_znr
@psndna88
@andip71
@xanaxdroid
@sultanxda
@YaroST12
@celtare21
@0ctobot
@tytydraco
@kdrag0n
@uvera
All the devs from whom i kanged
Source code:
https://github.com/ktommy91/kernel_xiaomi_sdm660.git
If you like what I made you can give some $ for my funeral:
https://www.paypal.me/ktommy91

Changelog:
r5.0:
- Rebased on kernel.lnx.4.4.r37-rel
- Built with GCC8.3 with O3 and graphite opts
- Dropped many useless stuff
- Kuran's new scheduler and locking backports added(1.1 in hackbench)
- ...See on github
r5.1:
- Linux 4.4.190 merged
- Scheduler improvements(thx to Kuran)
- Some reverted audio patches(better clarity)
- defconfig: disable vmstat event counters
- arm64: Select ARCH_HAS_FAST_MULTIPLIER
- treewide: remove some missed tracing
- Added the missed minimum brightness change option
- Added the missed HDR support
- ASoC: msm: Handle bit_width to configure ASM session for FLAC playback
- USB tethering fixed
- arm: dts: qcom: add the panel-ack-disabled property to whyred/wayne/tulip panels
r5.2:
- kernel-common/android 4.4 merged (Linux 4.4.192)
- Qcacld-3.0, fw-api, qca-wifi-host-cmn: LA.UM.7.2.r1-07500-sdm660.0 CAF tag merged
- Added the changes from LA.UM.7.2.r1-07500-sdm660.0 CAF tag
- f2fs: Set cp_interval to 30 secs and make it no-op
- drivers: input: touchscreen: nvt_touch_e7s & synaptics_dsx_e7s: Use FIFO
- nvt_touch_d2s: Use a FIFO thread for work processing
- ... see on github
r5.3:
- Linux 4.4.194 merged
- LA.UM.7.5.2.r1-03700-8x96.0 CAF tag merged
- added some missing changes from LA.UM.7.2.r1-07600-sdm660.0
- qcacld-3.0, fw-api, qca-wifi-host-cmn: LA.UM.7.2.r1-07600-sdm660.0 CAF tag merged
- sched: Import sched_irq_work_queue()
- cpufreq: schedutil: Queue sugov irq work on policy online cpu
- printk: silence healthd messages from userspace
- sched/fair: Don't assign runtime for throttled cfs_rq
- Revert "drivers: input: touchscreen: nvt_touch_e7s & synaptics_dsx_e7s: Use FIFO"

what is Kangaro spectrum injector
and what perfboost conf. do
plz clarify

Did you solve Huaxing panel problem because it was still in version 3.0 If you no longer take a consideration!

John Amin said:
what is Kangaro spectrum injector
and what perfboost conf. do
plz clarify
Click to expand...
Click to collapse
Spectrum injector is for the old GSIs, nowdays not really necessary. Perfboost fw config is EAS compatible config for the perfboost fw.

Frkanyldz said:
Did you solve Huaxing panel problem because it was still in version 3.0 If you no longer take a consideration!
Click to expand...
Click to collapse
Huaxing should work.

In the 2.6 version, this is not a problem, but other current kernels are still going black screen issue

I'd like to try this kernel, but bootloop always bother me..

delphinuz said:
I'd like to try this kernel, but bootloop always bother me..
Click to expand...
Click to collapse
Magisk and some modules bother you.(or the stalkers)

ktommy91 said:
Spectrum injector is for the old GSIs, nowdays not really necessary. Perfboost fw config is EAS compatible config for the perfboost fw.
Click to expand...
Click to collapse
what do you recommend as cpu gov. for 3giga ram whyred varient for optimum battery and performence without overclocking

works on miui?

Non UV versions are up, flash if you experience random freezes.

John Amin said:
what do you recommend as cpu gov. for 3giga ram whyred varient for optimum battery and performence without overclocking
Click to expand...
Click to collapse
Darktuil +512 MB zRAM
raptorddd said:
works on miui?
Click to expand...
Click to collapse
Should.

ktommy91 said:
Non UV versions are up, flash if you experience random freezes.
Click to expand...
Click to collapse
UV versions what is that

John Amin said:
UV versions what is that
Click to expand...
Click to collapse
under volt.

raptorddd said:
under volt.
Click to expand...
Click to collapse
do you mean not overclock

John Amin said:
do you mean not overclock
Click to expand...
Click to collapse
different thing. undervokt is voltage of cpu lowered so it consumes less power.. if too low it will reboot or freeze phone . if so flash the zip that says non UV
OC overclocked cpu get higher frequencies ..

ktommy91 said:
Non UV versions are up, flash if you experience random freezes.
Click to expand...
Click to collapse
Man you should've made non uv zip long time ago. I was having bootloop on your kernel since v2.0. If you would have made non uv verison back then. We would not have bootlooo problem. Everything is working perfectly now. No reboots.
One request can you make a ramdisk zip for setting schedutil governer as default like in insigniux where flashing it will make schedutil default cpu governor

raptorddd said:
different thing. undervokt is voltage of cpu lowered so it consumes less power.. if too low it will reboot or freeze phone . if so flash the zip that says non UV
OC overclocked cpu get higher frequencies ..
Click to expand...
Click to collapse
so what version you recommend safer non UV or normal

John Amin said:
so what version you recommend safer non UV or normal
Click to expand...
Click to collapse
I recommend non uv as uv one was causing bootloop