I think my CM7 installation is f up. It did not install, and I can't go back to my phone! Its stuck on Google logo with an unlock key down below. I can get in clockworkmod recovery though. Any help?
Did u try to install it from the recovery menu that should work
Sent from my PC36100 using XDA Premium App
smoothfreeze said:
I think my CM7 installation is f up. It did not install, and I can't go back to my phone! Its stuck on Google logo with an unlock key down below. I can get in clockworkmod recovery though. Any help?
Click to expand...
Click to collapse
go into recovery, wipe data/factory reset, flash cm7, flash gapps(google apps add on), reboot. if that still leads you to the same place, then redownload the rom, put it on your sd card, and try again.
simms22 said:
go into recovery, wipe data/factory reset, flash cm7, flash gapps(google apps add on), reboot. if that still leads you to the same place, then redownload the rom, put it on your sd card, and try again.
Click to expand...
Click to collapse
and wipe dalvik (in advanced).
Wait, I'm at recovery mode now. A whole bunch of lines appeared at the bottom of the screen.
E:Can't mount /cache/recovery/last_log
E:Can't find /cache/recovery/last_log
E:Can't find misc
E:failed to find "cache" partition to mount at "/cache"
smoothfreeze said:
Wait, I'm at recovery mode now. A whole bunch of lines appeared at the bottom of the screen.
E:Can't mount /cache/recovery/last_log
E:Can't find /cache/recovery/last_log
E:Can't find misc
E:failed to find "cache" partition to mount at "/cache"
Click to expand...
Click to collapse
You get this error because you are using i9023 version of Nexus S and you installed the stock version of Clockworkmod Recovery
You should install the Clockworkmod Custom Recovery from the Development Forums for the i9023.
Hey all:
While I consider myself quite technologically inclined, it appears that what I think and what reality is are quite different things. Thus, I look for advice from this wonderfully adept community (I've surfed around quite a bit, but I've never had to ask anything).
Here are my phone's specs:
Model: i9020A
Carrier: Koodo
The short story:
because, currently, there's only ICS for the GSM version of the phone, I thought I'd try flashing the GSM version of ICS onto my phone, then load the radio settings for my phone type so that it would work. It didn't. I was able to load ICS, and it worked great; the radio settings for the i9020A, however, didn't load up. As a result, I tried to reload the stock 2.3.6 onto the phone, and I seemed to have failed miserably.
I'm now at the following point:
Normal boot: only loads to the Google screen (with the padlock)
Fastboot Mode: here's the information.
Product Name - HERRING
HW Version - REV 16
Bootloader Version: I9020XXKL1
Baseband Version: I9020XXKI1
Carrier Info: ATT
Serial Number: 3935CEB394BE00EC
Lock State: Unlocked
When I select "Recovery," it briefly goes to the Google screen (with the unlocked padlock at the bottom), then loads into ClockworkMod Recovery v3.0.0.0
Here are the below options:
- reboot system now
- apply update from sdcard
- wipe data/factory reset
- wipe cache partition
- install zip from sd card
- backup and restore
- mounts and storage
- advanced
- GO BACK
Below these options is the following information:
ClockworkMod Recovery v3.0.0.0
E: Can't find misc
E: failed to find "cache" partition to mount at "/cache"
E: Can't mount /cache/recovery/command
E: Can't find misc
E: failed to find "cache" partition to mount at "/cache"
E: Can't mount /cache/recovery/log
E: Can't open /cache/recovery/log
E: failed to find "cache" partition to mount at "/cache"
E: Can't mount /cache/recovery/last_log
E: Can't open /cache/recovery/last_log
E: Can't find misc
E: failed to find "cache" partition to mount at "/cache"
Essentially, what I am asking is if there is anyway to load the original 2.3.6 for the i9020A on here. If I'm able, then I'll patiently wait for the ICS OTA.
Any help that anyone can provide would be immensely appreciated. If there's any other information I can provide, such as pictures, I'd be more than happy to provide that.
Thanks so much.
rcm8 said:
Hey all:
While I consider myself quite technologically inclined, it appears that what I think and what reality is are quite different things. Thus, I look for advice from this wonderfully adept community (I've surfed around quite a bit, but I've never had to ask anything).
Here are my phone's specs:
Model: i9020A
Carrier: Koodo
The short story:
because, currently, there's only ICS for the GSM version of the phone, I thought I'd try flashing the GSM version of ICS onto my phone, then load the radio settings for my phone type so that it would work. It didn't. I was able to load ICS, and it worked great; the radio settings for the i9020A, however, didn't load up. As a result, I tried to reload the stock 2.3.6 onto the phone, and I seemed to have failed miserably.
I'm now at the following point:
Normal boot: only loads to the Google screen (with the padlock)
Fastboot Mode: here's the information.
Product Name - HERRING
HW Version - REV 16
Bootloader Version: I9020XXKL1
Baseband Version: I9020XXKI1
Carrier Info: ATT
Serial Number: 3935CEB394BE00EC
Lock State: Unlocked
When I select "Recovery," it briefly goes to the Google screen (with the unlocked padlock at the bottom), then loads into ClockworkMod Recovery v3.0.0.0
Here are the below options:
- reboot system now
- apply update from sdcard
- wipe data/factory reset
- wipe cache partition
- install zip from sd card
- backup and restore
- mounts and storage
- advanced
- GO BACK
Below these options is the following information:
ClockworkMod Recovery v3.0.0.0
E: Can't find misc
E: failed to find "cache" partition to mount at "/cache"
E: Can't mount /cache/recovery/command
E: Can't find misc
E: failed to find "cache" partition to mount at "/cache"
E: Can't mount /cache/recovery/log
E: Can't open /cache/recovery/log
E: failed to find "cache" partition to mount at "/cache"
E: Can't mount /cache/recovery/last_log
E: Can't open /cache/recovery/last_log
E: Can't find misc
E: failed to find "cache" partition to mount at "/cache"
Essentially, what I am asking is if there is anyway to load the original 2.3.6 for the i9020A on here. If I'm able, then I'll patiently wait for the ICS OTA.
Any help that anyone can provide would be immensely appreciated. Thank you all kindly in advance.
Click to expand...
Click to collapse
Do you have a backup that you can restore? If not, grab the 2.3.6 update from here http://forum.xda-developers.com/showthread.php?t=1063664 and try a flesh install.
You should also flash a new radio, I didn't have any luck with the KI1 radio on my i9020a.
Not saying this will help at all but have you tried the latest version of clockwork mod your version seems to be very old. Try this one and see if it helps Clockwork 5.0.2.3
Thanks a ton for this. I'm a bit of a noob with this, so any other information, i.e., how to flash it properly, would be super helpful.
Again, thanks a bunch for the reply!
rcm8 said:
Thanks a ton for this. I'm a bit of a noob with this, so any other information, i.e., how to flash it properly, would be super helpful.
Again, thanks a bunch for the reply!
Click to expand...
Click to collapse
Download this LINK put it on your internal sd card boot up into recovery then do a full wipe in clockwork mod and flash the ROM it contains recovery, radio and bootloader. So you will be back to stock and can follow one of the guides on here to get back onto which every rom you choose.
Will do.
Thanks again!
FeaRThiS said:
Download this LINK put it on your internal sd card boot up into recovery then do a full wipe in clockwork mod and flash the ROM it contains recovery, radio and bootloader. So you will be back to stock and can follow one of the guides on here to get back onto which every rom you choose.
Click to expand...
Click to collapse
Okay, so I've downloaded the file, then put it onto the sd card.
I then boot into Fastboot Mode, then go to Recovery. I do the following here:
- wipe data/factory reset, then "Yes - delete all user data". It says the following:
-- Wiping data. . .
Formatting /data. . .
Formatting /cache. . .
E: format_volume: no MTD partition "cache"
Formatting /sd-ext. . .
Formatting /sdcard/.android_secure. . .
Data wipe complete.
E: failed to find "cache" partition mount at "/cache"
E: can't mount /cache/recovery/log
E: can't open /cache/recovery/log
E: failed to find "cache" partition to mount at "/cache"
E: can't mount /cache/recovery/last_log
E: can't open /cache/recovery/last_log
E: can't find misc
E: failed to find "cache" partition to mount at "/cache"
I then went into "advance" and "Wipe Dalvik Cache" (which works)
I also did "wipe cache partition," and it says the following:
-- Wiping cache
Formatting /cache
E: format_volume: no MTD partition "cache"
Cache wipe complete.
E: failed to find "cache" partition mount at "/cache"
E: can't mount /cache/recovery/log
E: can't open /cache/recovery/log
E: failed to find "cache" partition to mount at "/cache"
E: can't mount /cache/recovery/last_log
E: can't open /cache/recovery/last_log
E: can't find misc
E: failed to find "cache" partition to mount at "/cache"
I then went to "install zip from sd card," then "choose zip from sd card," then chose the file that you LINKED to (0b9c8148de0d.signed-sojua-ota-189904.0b9c814)
It says:
-- installing <the above file name>
E: can't find misc
Finding update package
Opening update package
Installing update. . .
then there's a bar, which never fills; it then goes to the following text:
assert failed: write_raw_image ("/tmp/boot.img","boot")
E: Error in /sdcard/<the file name from above>
(Status 7)
Installation aborted.
I'm pretty stuck. Anything else you might have would be fantastic!
Thanks again.
tehgeekguy said:
Do you have a backup that you can restore? If not, grab the 2.3.6 update from here http://forum.xda-developers.com/showthread.php?t=1063664 and try a flesh install.
You should also flash a new radio, I didn't have any luck with the KI1 radio on my i9020a.
Click to expand...
Click to collapse
Yeah, I tried flashing the original 2.3.6 from that page, but there's no luck . . . :S
Thanks for the reply, though! Do you recommend anything else?
rcm8 said:
Yeah, I tried flashing the original 2.3.6 from that page, but there's no luck . . . :S
Thanks for the reply, though! Do you recommend anything else?
Click to expand...
Click to collapse
What do you mean "no luck"? What error did you get? Did you get the right version?
If you're on a i9020A you should be using this one - http://goo.gl/nN0Zp (Official, signed, can flash with ClockworkMod or stock recovery. Contains recovery, radio and bootloader.)
rcm8 said:
Okay, so I've downloaded the file, then put it onto the sd card.
I then boot into Fastboot Mode, then go to Recovery. I do the following here:
- wipe data/factory reset, then "Yes - delete all user data". It says the following:
-- Wiping data. . .
Formatting /data. . .
Formatting /cache. . .
E: format_volume: no MTD partition "cache"
Formatting /sd-ext. . .
Formatting /sdcard/.android_secure. . .
Data wipe complete.
E: failed to find "cache" partition mount at "/cache"
E: can't mount /cache/recovery/log
E: can't open /cache/recovery/log
E: failed to find "cache" partition to mount at "/cache"
E: can't mount /cache/recovery/last_log
E: can't open /cache/recovery/last_log
E: can't find misc
E: failed to find "cache" partition to mount at "/cache"
I then went into "advance" and "Wipe Dalvik Cache" (which works)
I also did "wipe cache partition," and it says the following:
-- Wiping cache
Formatting /cache
E: format_volume: no MTD partition "cache"
Cache wipe complete.
E: failed to find "cache" partition mount at "/cache"
E: can't mount /cache/recovery/log
E: can't open /cache/recovery/log
E: failed to find "cache" partition to mount at "/cache"
E: can't mount /cache/recovery/last_log
E: can't open /cache/recovery/last_log
E: can't find misc
E: failed to find "cache" partition to mount at "/cache"
I then went to "install zip from sd card," then "choose zip from sd card," then chose the file that you LINKED to (0b9c8148de0d.signed-sojua-ota-189904.0b9c814)
It says:
-- installing <the above file name>
E: can't find misc
Finding update package
Opening update package
Installing update. . .
then there's a bar, which never fills; it then goes to the following text:
assert failed: write_raw_image ("/tmp/boot.img","boot")
E: Error in /sdcard/<the file name from above>
(Status 7)
Installation aborted.
I'm pretty stuck. Anything else you might have would be fantastic!
Thanks again.
Click to expand...
Click to collapse
Could be wrong but that looks like your partition tables got messed up at some point.
EDIT you could also try looking on here might be helpful LINK
EDIT X2 Other people have screwed up their partition tables and have fixed it using this guide LINK
tehgeekguy is right, if your model number is I9020A then it should work using the rom he linked, did you install Clockwork 5.0.2.3 before trying to install the stock 2.3.6 rom, if not then please try.
Yeah, that's the one I tried, but I received the same error message as before:
-- installing <the above file name>
E: can't find misc
Finding update package
Opening update package
Installing update. . .
then there's a bar, which never fills; it then goes to the following text:
assert failed: write_raw_image ("/tmp/boot.img","boot")
E: Error in /sdcard/<the file name from above>
(Status 7)
Installation aborted.
I'm going to try it one more time to see if I can't get it working. I have a feeling my partitions may have been messed up . . .
Thanks for the reply.
d.chatten said:
tehgeekguy is right, if your model number is I9020A then it should work using the rom he linked, did you install Clockwork 5.0.2.3 before trying to install the stock 2.3.6 rom, if not then please try.
Click to expand...
Click to collapse
Yeah, I'll be sure to try this right away.
Thanks a ton.
FeaRThiS said:
Could be wrong but that looks like your partition tables got messed up at some point.
EDIT you could also try looking on here might be helpful LINK
EDIT X2 Other people have screwed up their partition tables and have fixed it using this guide LINK
Click to expand...
Click to collapse
I'll definitely take a look at this. Thank a bunch!
The partitions is probably right, have you tried with the stock recovery instead of clockwork, worth a try.
d.chatten said:
tehgeekguy is right, if your model number is I9020A then it should work using the rom he linked, did you install Clockwork 5.0.2.3 before trying to install the stock 2.3.6 rom, if not then please try.
Click to expand...
Click to collapse
So, I went to the page and downloaded the following file:
"Option for no confirmation at all. Just flash in recovery.
signed-noconfirm.zip"
I put this onto the sd card, then attempted to install. This is what I received:
"-- Installing: /sdcard/signed-noconfirm.zip
E: Can't find misc
Finding update package . . .
Opening update package . . .
Installing update . . .
Installing .no_confirm
use at your own risk!!
reboot recovery and enjoy!
Install from sdcard complete"
Thus, it seemed to work pretty well. I thus rebooted recovery, but ClockworkMod is still showing that it's version V3.0.0.0.
Should I be flashing one of the other options on that page? If so, which one? And would you, by chance, have a detailed explanation as to how to go about doing that?
Thanks so much. I'm starting to feel like I won't be getting anywhere . . . . The responses have been awesome, though, everyone. I really appreciate it.
You have been trying to install a switch to turn off confirmations, to get Clockwork 5.0.2.3 installed you will need to use the same method as when you installed Clockwork 3.0.0.0 but use this image > 5023-cyan.img.
d.chatten said:
You have been trying to install a switch to turn off confirmations, to get Clockwork 5.0.2.3 installed you will need to use the same method as when you installed Clockwork 3.0.0.0 but use this image > 5023-cyan.img.
Click to expand...
Click to collapse
Makes a lot of sense. I'll try that.
Thanks.
d.chatten said:
You have been trying to install a switch to turn off confirmations, to get Clockwork 5.0.2.3 installed you will need to use the same method as when you installed Clockwork 3.0.0.0 but use this image > 5023-cyan.img.
Click to expand...
Click to collapse
Okay, so I flashed Clockwork 5.0.2.3, then I flashed the correct i9020A package. It worked beautifully.
Thanks a ton, everyone, for all your help. This is great!
Clad it worked for you.
Hi, I was trying to install an ICS ROM on my Nexus S i9020a last night, and I must have messed something up. The ROM installed but it just hung on the google logo. So I went back into recovery (CWM 3.0.0.5) to restore my nandroid backup but I got:
E:format_volume: no MTD partition "boot"
Error while formatting BOOT : !
E:Failed to find "cache" partition to mount at " /cache"
E:Can't mount /cache/recovery/last_log
E:Can't mount /cache/recovery/last_log
E:Can't find misc
E:failed to find "cache" partiton to mount at " /cache"
I don't know much about what these things, but I imagine the seemingly missing cache is the problem. I cannot mount or format the cache either. I get similar errors. Flashing roms seems to 'work', but I still get the bootloop. Flashing img's does not work. "Installation aborted".
I have no idea what I can do to reverse this. At this point, I want to restore to stock. I hope I haven't done permanent damage. Can anyone please help me with this?
First try to upgrade to the latesy cwm. It had very much bugs fixed
Sent from my Nexus S using xda premium
Computer doesn't seem to recognize the phone in fastboot mode, can you link me to the a newer CWM zip so I can flash it in recovery?
I was trying to install a custom ROM on my infuse, but bricked it. Now I ODIN back and can get to either the CWM recovery screen OR the Android system recovery 3e screen but here is where it gets weird, I cannot figure out for the life of me why I cannot flash from a zip file, I always end up with both recoveries telling me that my storage is not pre-paired yet. The read out goes some thing like this:
--Copying media files...
E:failed to mount /dbdata (file exists)
E:copy_dbdata_media: Can't mount /dbdata
your storage not prepared yet, please use UI menu for format and reboot actions.
Media files copy failed.
Please if anyone has a idea, shoot me your thoughts. Thanks in advance
What rom are you trying to flash?
You are on stock froyo, correct?
What method are you using to get cwm?
Sent from my sweet & buttery Infuse
please help me!!!
i have the same problem rogers infuse
dormankenneth said:
I was trying to install a custom ROM on my infuse, but bricked it. Now I ODIN back and can get to either the CWM recovery screen OR the Android system recovery 3e screen but here is where it gets weird, I cannot figure out for the life of me why I cannot flash from a zip file, I always end up with both recoveries telling me that my storage is not pre-paired yet. The read out goes some thing like this:
--Copying media files...
E:failed to mount /dbdata (file exists)
E:copy_dbdata_media: Can't mount /dbdata
your storage not prepared yet, please use UI menu for format and reboot actions.
Media files copy failed.
Please if anyone has a idea, shoot me your thoughts. Thanks in advance
Click to expand...
Click to collapse
try this:
reboot recovery
factory reset
wipe cache
wipe d cache (in advanced options on cwm)
got to mounts and storage
format system
format boot
format cache
and format data
flash rom
after rom is done flashing
wipe cache & D cache again reboot
hope this helps, if not checkout this thread should help you skip a few steps >>>> HERE