Oh man! You would think that they would appreciate the hard work put into it.
I upgraded my wife from a rooted GB to the stock ICS found here:
http://forum.xda-developers.com/showthread.php?t=1654347
She want's to kill me! She can't stand it. Not the new interface, not the new gmail,. and so on. I know I know - I hear you ! She's gone mad!
How do I go back to stock GB? Do I need to flash older firmware ZIP file found here?
http://forum.xda-developers.com/showthread.php?t=1459767
T-MOBILE:
modelid: PG5813000
modelid: PG5813001
modelid: PG5810000
modelid: PG5811000
cidnum: T-MOB010
cidnum: T-MOB009
cidnum: T-MOB102
cidnum: T-MOB004
cidnum: T-MOB101
cidnum: T-MOB007
cidnum: T-MOB006
cidnum: T-MOBL11
cidnum: T-MOB003
cidnum: T-MOB008
cidnum: T-MOB005
DOWNLOAD 3.32.531.14 710RD (TMO ONLY [THX GROGG88]): http://goo.gl/JCWEO
MD5: 79EDF95337826DF73083E227DB8DE7C3
DOWNLOAD 3.32 Unlocked: http://goo.gl/znhyw
MD5: 0f07e24bbb2a9a927164fab374e5246d
DOWNLOAD 3.30 Unlocked: http://goo.gl/TLZ8l
MD5: 7047d3c9431156d7ba4b4a5f7aa270d2
DOWNLOAD 3.24 Unlocked: http://goo.gl/nI6h2
MD5: 9cc63d3360d5af7da778581cc3b8c455
DOWNLOAD 3.12: http://goo.gl/VSO31
MD5: 5828a0787795dcb4e10896dcbf60dd15
DOWNLOAD 1.17: http://goo.gl/Jupb3
MD5: 3e2dbfb38596cdcfe1c7c1be6e68f7ea
If so, which one? Which one corresponds to T-Mobile GB?
After this is done, I need STOCK ROM, no?
Thanks a million times, and heads up - don't touch the wife's phone!
return to stock GB
benyben123 said:
Oh man! You would think that they would appreciate the hard work put into it.
I upgraded my wife from a rooted GB to the stock ICS found here:
http://forum.xda-developers.com/showthread.php?t=1654347
She want's to kill me! She can't stand it. Not the new interface, not the new gmail,. and so on. I know I know - I hear you ! She's gone mad!
How do I go back to stock GB? Do I need to flash older firmware ZIP file found here?
http://forum.xda-developers.com/showthread.php?t=1459767
T-MOBILE:
modelid: PG5813000
modelid: PG5813001
modelid: PG5810000
modelid: PG5811000
cidnum: T-MOB010
cidnum: T-MOB009
cidnum: T-MOB102
cidnum: T-MOB004
cidnum: T-MOB101
cidnum: T-MOB007
cidnum: T-MOB006
cidnum: T-MOBL11
cidnum: T-MOB003
cidnum: T-MOB008
cidnum: T-MOB005
DOWNLOAD 3.32.531.14 710RD (TMO ONLY [THX GROGG88]): http://goo.gl/JCWEO
MD5: 79EDF95337826DF73083E227DB8DE7C3
DOWNLOAD 3.32 Unlocked: http://goo.gl/znhyw
MD5: 0f07e24bbb2a9a927164fab374e5246d
DOWNLOAD 3.30 Unlocked: http://goo.gl/TLZ8l
MD5: 7047d3c9431156d7ba4b4a5f7aa270d2
DOWNLOAD 3.24 Unlocked: http://goo.gl/nI6h2
MD5: 9cc63d3360d5af7da778581cc3b8c455
DOWNLOAD 3.12: http://goo.gl/VSO31
MD5: 5828a0787795dcb4e10896dcbf60dd15
DOWNLOAD 1.17: http://goo.gl/Jupb3
MD5: 3e2dbfb38596cdcfe1c7c1be6e68f7ea
If so, which one? Which one corresponds to T-Mobile GB?
After this is done, I need STOCK ROM, no?
Thanks a million times, and heads up - don't touch the wife's phone!
Click to expand...
Click to collapse
I have use the this a few times to get back to GB om T-MOUS....
just scroll down to the downloads and use theT-MOUS 1.50.531 PG58IMG.zip
but it in the root of the SDcard and boot into Hboot(ie) power button+volume down and all well be good....
I hope this will help you and don't forget to thank HIM for the zip file.
http://forum.xda-developers.com/showthread.php?t=1630631
Honestly speaking I'm not a big fan of ics either. I blame T-Mobile because the update was so hyped that when they finally released it 3 months after it was originally supposed to be released it felt way too underwhelming. There are still a few bugs , and they decided to charge you for old features. :banghead:
Sent from my HTC Sensation 4G using the XDA app. follow me on Twitter @darkwolfpsn360
Ndokami said:
Honestly speaking I'm not a big fan of ics either. I blame T-Mobile because the update was so hyped that when they finally released it 3 months after it was originally supposed to be released it felt way too underwhelming. There are still a few bugs , and they decided to charge you for old features. :banghead:
Sent from my HTC Sensation 4G using the XDA app. follow me on Twitter @darkwolfpsn360
Click to expand...
Click to collapse
Ndokami neither am I..... the 3.6 Sense is just like the 3.5 Sense, but I must say I fell in love with the Sense 4.0
If youre on the stock ICS OTA update, there are a few more steps involved rather than just flashing a RUU and done.
1. first unlock your bootloader and root your device
2. change s=on to s=off using juopunutbear's method
3. flash 1.17 firmware in fastboot
4. run stock RUU to return back to stock out of the box device
I did this several times and have never had any bricks or problems
if you want to go back to stock GB, you simply just downgrade the firmware to 1.17 and flash a GB rom or run a GB RUU
Don't understand what her problem is with ICS. Did she do a factory reset? What's broken now?
If you want to go back, are you s-off currently? If not, follow the new Juopunetbear to S-OFF without unlocking bootloader. Then flash the TMO GB RUU. If already S-OFF, just flash the RUU.
Get rid of the wife and enjoy ICS with someone else!
galaxys said:
Get rid of the wife and enjoy ICS with someone else!
Click to expand...
Click to collapse
+1 ON THAT.....
Related
I have my HTC Sensation XE which has originally the 2.3.4 Gingerbread.
I would like to have an assistance on how to do it?
Do I need to flash specific firmwares? Where could I get it? and is it safe to use the backup I made before with that Gingerbread Rom?
Thank you.
I used SUPERCID method.. Therefore I'm not exactly sure whats my CID number and RUU but im pretty sure its either HTC__038 or HTC__044 asia or wwe_asia.
If it helps , I had some Starhub apps, Singtel or whatever, so I assume its more of an HTC__044 CID number?
Thank you.
If you did superCID you don't need to worry about which ruu you use. There is a stock GB ruu link in the s-on section of the sticky guide to everything in the dev forum.
Sent from my HTC Pyramid using xda premium
stringer7 said:
If you did superCID you don't need to worry about which ruu you use. There is a stock GB ruu link in the s-on section of the sticky guide to everything in the dev forum.
Sent from my HTC Pyramid using xda premium
Click to expand...
Click to collapse
Thank you for the response. But im trying to get the OTA also.
That's why I want to be sure about my RUU. and CID ^^, Thank you.
ardom said:
Thank you for the response. But im trying to get the OTA also.
That's why I want to be sure about my RUU. and CID ^^, Thank you.
Click to expand...
Click to collapse
OK, you can find your original cid by entering "getprop ro.cid" in terminal emulator.
Sent from my HTC Pyramid using xda premium
stringer7 said:
OK, you can find your original cid by entering "getprop ro.cid" in terminal emulator.
Sent from my HTC Pyramid using xda premium
Click to expand...
Click to collapse
I had changed my CID when i rooted mine i used supercid method and changed it to 11111111 i forgot my original ru. Im nt sure exactly too if its wwe_asia or asia but im sure its either of the two. I had Starhub app too so i have a premonition that it could be htc__044 or asiawwe singapore version.
Im confused lol. I Want to go back to my stock ruu and cid. Or least the cid so i could restore my backup if possible. Then if ever i ota update. Less prblems could be encountered.
Sent from my HTC Sensation XE with Beats Audio
What are the steps I need to do?
Which to flash? any firmware?
THank you.
This is a prime example of making sure you check for the RUU BEFORE you flash anything new
Do what is said above and it will tell you your original CID. We can then see if we can find the RUU
Good luck. I just updated my xe to ics by simply reading a lot of posts on this site. And simply following all instructions.
At first tho, I mistakenly flashed sensation and not sensation xe. But again, found the correct files here on this site. All sorted and now have beats audio back, now with sense and ics latest.
So many helpful people here, so I hope you too get your fine sorted to the way you want yours. Although curious as to why you wanna go back to gb.
Surely ics is better?
Sent from my HTC Sensation XE with Beats Audio Z715e using XDA
hi
hi guys, do you have any link for official Gingerbread RUU 1.73 with beats audio for sensation XE? i just turn my sensation XE to s-on and flash the RUU but i flashed a wrong ruu.thanks guys.i want to update my sensation XE to ics through system update
Are you S-ON again now? If so, you'll need to S-OFF before you can flash the XE RUU (which you can find here):
https://www.yousendit.com/download/M3BtWmd2YWJ6NE5qQTlVag
Its already 1111111 for my CID. Im planning to go back to stock gb so i can get the ota ics and try it out.
Sent from my HTC Sensation XE with Beats Audio
Yes my phone is s-on again, so how do I flash the ruu?and just s-off? No need to do rooting?thanks
Help ~ Loop boot
I was gonna revert to my stock Gingerbread 2.3.4, I was trying to achieve ICS 4.x and Cyanogen mod 9, but I n00bed it up and wound up in a boot loop. I've read several different tutorials and I gathered I need to flash back to Stock GB. Do I just need a link to a Stock GB that fits my CID?
CID = T-MOB010
No Super CID
No RUU
Thanks much
soldierforus said:
I was gonna revert to my stock Gingerbread 2.3.4, I was trying to achieve ICS 4.x and Cyanogen mod 9, but I n00bed it up and wound up in a boot loop. I've read several different tutorials and I gathered I need to flash back to Stock GB. Do I just need a link to a Stock GB that fits my CID?
CID = T-MOB010
No Super CID
No RUU
Thanks much
Click to expand...
Click to collapse
yes yes stock GB would do ..also ..you have stock ICS for that cid too want that ?
GB RUU for TMOB USA
ICS RUU for TMOB USA (post #1 section #3 has the link to RUU's)
but
care to explain more what happened ?..it probably might be a small solution
small details would do ..
complete details present in the bootscreen (a screenshot would do too)
also
a complete output of the following command (except IMEI and serail number)
fastboot getvar all
then i can give you a perfect solution
ganeshp said:
yes yes stock GB would do ..also ..you have stock ICS for that cid too want that ?
GB RUU for TMOB USA
ICS RUU for TMOB USA (post #1 section #3 has the link to RUU's)
but
care to explain more what happened ?..it probably might be a small solution
small details would do ..
complete details present in the bootscreen (a screenshot would do too)
also
a complete output of the following command (except IMEI and serail number)
fastboot getvar all
then i can give you a perfect solution
Click to expand...
Click to collapse
Sorry to double post, I thought this may be a dead thread since the previous post had a question and no reply in 4 months.
_____________________________________________
The Details:
Boot loop began after I flashed to firmware 3.32 using:
Universal Firmware 3.32 Universal (Non-TMOUS): Since I am on TMO, I gather I should have used the TMOUS flash?
DOWNLOAD: http://d-h.st/afS
MD5: 8f50e9f4f3fab7edcd4013015703f81c
From this tutorial: http://forum.xda-developers.com/showthread.php?p=21711154#post21711154
I later I found a cynaogen tutorial to help with boot loop and followed these steps:
1) Set to factory reset
2)Cleared Delvick (sp?) Cache
____________________________________________
Current Boot Screen:
Revolutionary
Pyramid PVT SHIP S-OFF RL
HBOOT 1.27.1100
RADIO-11.22.3504.07_M
OpenADSP-v02. 6. 0. 226.00.0131
eMMC-boot
_____________________________________________
Getvar all Results:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.27.1100
(bootloader) version-baseband: 11.22.3504.07_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.32.401.3
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5810000
(bootloader) cidnum: T-MOB010
(bootloader) battery-status: good
(bootloader) battery-voltage: 3816mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 617f0a98
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.490s
So how do the RUU's function exactly? I read the glossary term in wiki, but I don't fully understand the concept. They will update my ROM through window? I guess I need to be able to kill this boot loop first though.
Thanks again
soldierforus said:
Sorry to double post, I though this may be a dead thread since the previous post had a question and no reply in 4 months.
_____________________________________________
The Details:
Boot loop began after I flashed to firmware 3.32 using:
Universal Firmware 3.32 Universal (Non-TMOUS): Since I am on TMO, I gather I should have used the TMOUS flash?
DOWNLOAD: http://d-h.st/afS
MD5: 8f50e9f4f3fab7edcd4013015703f81c
From this tutorial: http://forum.xda-developers.com/showthread.php?p=21711154#post21711154
I later found a cynaogen turoial to help with bootloop and followed these steps:
1) Set to factory reset
2)Cleared Delvick (sp?) Cache
____________________________________________
Current Boot Screen:
Revolutionary
Pyramid PVT SHIP S-OFF RL
HBOOT 1.27.1100
RADIO-11.22.3504.07_M
OpenADSP-v02. 6. 0. 226.00.0131
eMMC-boot
_____________________________________________
Getvar all Results:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.27.1100
(bootloader) version-baseband: 11.22.3504.07_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.32.401.3
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5810000
(bootloader) cidnum: T-MOB010
(bootloader) battery-status: good
(bootloader) battery-voltage: 3816mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 617f0a98
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.490s
So How the RUU's function exactly. They will update my ROM through window? I guess I need to be able to kill this boot loop first though.
Thanks again
Click to expand...
Click to collapse
for RUU ..you need to connect the phone in bootloader to pc ..and then just double click on it ...that will do
one last try for flashing custom rom ..still not worked then go for RUU
btw what recovery you are using ?
if using cwm ...can you switch to 4EXT recovery ?
get the recovery image from the below db link (recovery.img inside the zip)
4EXT DB link
and flash it via fastboot
fastboot flash recovery recovery.img
got to the recovery
4EXT->wipe|format->format all partitions except sdcard
then back to main menu ...and flash the rom (what ever custom rom you want)
then reboot and see..if it still stuck at boot logo
then extract the boot.img from the rom zip file
and flash it manually
fastboot flash boot boot.img
then reboot
still stuck ?
then reflash the firmware (be sure to check the md5 of the firmware you have downloaded)
still stuck?
then RUU
No-Go
ganeshp said:
for RUU ..you need to connect the phone in bootloader to pc ..and then just double click on it ...that will do
one last try for flashing custom rom ..still not worked then go for RUU
btw what recovery you are using ?
if using cwm ...can you switch to 4EXT recovery ?
get the recovery image from the below db link (recovery.img inside the zip)
4EXT DB link
and flash it via fastboot
fastboot flash recovery recovery.img
got to the recovery
4EXT->wipe|format->format all partitions except sdcard
then back to main menu ...and flash the rom (what ever custom rom you want)
then reboot and see..if it still stuck at boot logo
then extract the boot.img from the rom zip file
and flash it manually
fastboot flash boot boot.img
then reboot
still stuck ?
then reflash the firmware (be sure to check the md5 of the firmware you have downloaded)
still stuck?
then RUU
Click to expand...
Click to collapse
So it wouldn't let me flash 4ext, it says: "cannot load 'recovery.img'" I didn't unzip it or even leave the zip in the root, I took only the recovery.img and left it in to sd root.
You said to flash the custom ROM, but this is my first attempt, and although I have downloaded CM9, the instructions I have read from other tutorials tell me I have to upgrade first to firmware 3.32, then to firmware 3.33, then I can install CM9, which will give me ICS/4.x Am I correct so far?
I don't even know if the 3.32 flash was a success (Do you?) since now I am in a boot loop. Could it be because I should have used the TMOUS instead of the non-TMOUS universal for 3.32? I picked the non-TMOUS because I didn't realize what TOUS stood for at the time, and the other link said universal (and the android-info had my cid/mid)
Also thanks for the RUU links, but I don't know what good the ICS will do if I don't have it yet. Those RUU's will do what exactly? Update to the latest ROM ? Also, is that for all roms or just 3rd party? Looking at the getvar log I sent you, I gather the 3.32 did work, So I should download the ICS 3.32 RUU link you sent me. That's what I am going to try now
EDIT
________________________________
I re-installed cm9, AND EUREKA!!!!!! My first custom ROM. Many thanks to all who helped! Now which RUU do I use, and how often should I run it?
soldierforus said:
So it wouldn't let me flash 4ext, it says: "cannot load 'recovery.img'" I didn't unzip it or even leave the zip in the root, I took only the recovery.img and left it in to sd root.
You said to flash the custom ROM, but this is my first attempt, and although I have downloaded CM9, the instructions I have read from other tutorials tell me I have to upgrade first to firmware 3.32, then to firmware 3.33, then I can install CM9, which will give me ICS/4.x Am I correct so far?
I don't even know if the 3.32 flash was a success (Do you?) since now I am in a boot loop. Could it be because I should have used the TMOUS instead of the non-TMOUS universal for 3.32? I picked the non-TMOUS because I didn't realize what TOUS stood for at the time, and the other link said universal (and the android-info had my cid/mid)
Also thanks for the RUU links, but I don't know what good the ICS will do if I don't have it yet. Those RUU's will do what exactly? Update to the latest ROM ? Also, is that for all roms or just 3rd party? Looking at the getvar log I sent you, I gather the 3.32 did work, So I should download the ICS 3.32 RUU link you sent me. That's what I am going to try now
EDIT
________________________________
I re-installed cm9, AND EUREKA!!!!!! My first custom ROM. Many thanks to all who helped! Now which RUU do I use, and how often should I run it?
Click to expand...
Click to collapse
RUU is rom update utility.. It's official htc file
Ruu is complete software for your phone
It wipes everything.. Rom, recovery firmware.. Everything and flashes the corresponding stock One...
So when you run ics ruu.. You will have complete ics stock rom of tmobile US
And the recovery flash you did earlier was wrong..
You need to keep that recovery file in the adb folder (it should be in pc) Then the command will fetch the file.. As you have kept it on top of sdcard.. It can't find it..
Sent from my pyramid.. Through blazing fast sonic waves
Hi
I won share with new OTA update for Europe version. Maybe somebody will use it.
its Android 2.3.5 with radio 7.51.50.25
If you download it, inside there is file: "firmware.zip", with have:
New radio.img (7.51.50.25)
You can download it from link:
www . mediafire . com/?otzt1e4b7rxf5r4"]OTA_Chacha_HTC_Europe_1.54.401.4-1.54.401.3_release_292304mj6944pprs3k15ei.zip
This is for:
cidnum: HTC__001
cidnum: HTC__E11
cidnum: HTC__102
cidnum: HTC__203
cidnum: HTC__405
cidnum: HTC__Y13
cidnum: HTC__032
cidnum: HTC__016
cidnum: HTC__N34
error 7
i am getting an error while flashing...
lolmop said:
i am getting an error while flashing...
Click to expand...
Click to collapse
wat is Your CID? (you can check it by instaling "CIDGetter"
What is your software wersion?
How do you apply update?
error 7
CID: HTC_203
Software: hexgore stock rom (android 2.3.5)
how i applied update? i copied the .zip to my sdcard and flashed it through CMW... getting 'error 7'
Hello. If this is a OTA, it's not the same as a complete ROM, isn't it??
I mean:
OTA: Over The Air update, relies on existing files to add, delete or patch them, so if any of them is missing, then it cannot be completed. It's used normally to update the existing software between minor versions.
Complete ROM: It's the full software, the complete files collection. It's how you can go back to stock rom, or install a recovery or a upgrade (GB -> ICS) provided by the manufacturer or the carrier.
So, when you try to apply an OTA update, is expected you to be using the very stock rom that came with the mobile, or at least a full rom from another carrier, or the manufacturer itself.
In a word: If you are trying to aply an OTA over hexgore stock rom, it should not to work.
So any news about dialer?
plz help me
i need the latest ruu for sensation xe htc__044
it's urgent
thanks in advance
foxthemene said:
plz help me
i need the latest ruu for sensation xe htc__044
it's urgent
thanks in advance
Click to expand...
Click to collapse
If I understand correctly htc__044 is Asia WWE, here is the RUU:
http://www.androidruu.com/getdownlo...0U_10.51.9007.27_M3_release_198358_signed.exe
(will download immediately)
For other RUUs:
http://www.androidruu.com/index.php?developer=Pyramid
foxthemene said:
plz help me
i need the latest ruu for sensation xe htc__044
it's urgent
thanks in advance
Click to expand...
Click to collapse
Hi,
Are you s-off?
Supercid?
i tried the ruu u mentioned but it didn't work
it gives me error
update from 3.33.707.151 to 1.35.707.1
i am s-on
and cid htc__044
foxthemene said:
i tried the ruu u mentioned but it didn't work
it gives me error
update from 3.33.707.151 to 1.35.707.1
i am s-on
and cid htc__044
Click to expand...
Click to collapse
Hi,
So, what version-main do you have?
If you are s-on ,it is much harder to match up the RUU,version-main, and cid.
They all have to match,or else the RUU will not work.
Can you do :
Code:
fastboot getvar version-main
malybru said:
Hi,
So, what version-main do you have?
If you are s-on ,it is much harder to match up the RUU,version-main, and cid.
They all have to match,or else the RUU will not work.
Can you do :
Code:
fastboot getvar version-main
Click to expand...
Click to collapse
Hi, I have the exact same problem with foxthemene. And I also have tried the given RUU 1.35.707.xxx. And it doesn't work, it keep giving 155 ERROR UNKOWN.
So here it is my getvar all
version: 0.5
version-bootloader: 1.27.0000
version-baseband: 11.24A.3504.31_M
version-cpld: None
version-microp: None
version-main:
serialno:
imei:
product: pyramid
platform: HBOOT-8260
modelid: PG5813000
cidnum: HTC__044
battery-status: good
battery-voltage: 4047mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: 617f0a98
hbootpreupdate: 11
gencheckpt: 0
Click to expand...
Click to collapse
I notice the version-main is no longer there. It shows up the first time I run the RUU, but after it failed, the version-main is gone.
So right now I'm confused, where exactly is the RUU for my CID? I upgraded this device using OTA, is that why there is no apparent RUU for my CID. How about factory images (the one they used for brand new Sensation), surely HTC have RUU for the base factory images, no?
aaulia said:
Hi, I have the exact same problem with foxthemene. And I also have tried the given RUU 1.35.707.xxx. And it doesn't work, it keep giving 155 ERROR UNKOWN.
So here it is my getvar all
I notice the version-main is no longer there. It shows up the first time I run the RUU, but after it failed, the version-main is gone.
So right now I'm confused, where exactly is the RUU for my CID? I upgraded this device using OTA, is that why there is no apparent RUU for my CID. How about factory images (the one they used for brand new Sensation), surely HTC have RUU for the base factory images, no?
Click to expand...
Click to collapse
Hi,
Firstly ,please remove your serial number and imei number.
You have a ICS/JB firmware, so a 1.35 RUU which is meant for GB , will not work.
I am not sure why your version main would disappear.
What happens when you boot up your phone?
Do you still have the update?Can you run it?
Is you phone a Sensation, or the XE version?
malybru said:
Hi,
Is you phone a Sensation, or the XE version?
Click to expand...
Click to collapse
depending from the MID i think it is the normal sensation
malybru said:
Hi,
Firstly ,please remove your serial number and imei number.
You have a ICS/JB firmware, so a 1.35 RUU which is meant for GB , will not work.
I am not sure why your version main would disappear.
What happens when you boot up your phone?
Do you still have the update?Can you run it?
Is you phone a Sensation, or the XE version?
Click to expand...
Click to collapse
Hi yes my device is normal Sensation, honestly I don't know why my version-main would disappear. But at least after digging deeper for a while I finally manage to flash CM 9.1.0 into my device, so at least it's now usable.
====
Woops, thanks, I removed them, sorry I kind of in a panic, didn't realize I just copy-pasted all of it
====
So this is the whole story, and what I know... hope this would help...
EDIT: I have HBOOT 1.27 (UNLOCKED) and S-ON
First, It started out with 4.0.3 (ICS) device that came from OTA (this was previously my wife's and I didn't touch it with custom rom, etc), when I received it. So the first think I do is do HTCDev unlock, it went smoothly, I installed TWRP (my favourite, but it seems I make a mistake here), it installed SuperSU, and I got root.
After that, I want to try custom ROM because I really dislike how slugish Sense is (I tried to like it, disable bunch of apps, but coming from Nexus, it's just doesn't feel right). So with my previous phones, I always have the original factory image(s) for fallback just incase I screw up . So after searching for a while, the only one RUU that I found that most likely work with my device is the 1.35.707 RUU (I didn't realize it was for GB).
Feeling safe after I got it, I went ahead and flash Albinoman's CM 10.2 using TWRP, and it stuck in a bootloop spectacularly . At this point everything is still normal, in terms of version-main, etc. So I think what the hell, let's flash RUU. So I tried it, put the device in fastboot, relocked, fireup RUU, at first it works, detect all the version, then it failed with 155 UNKNOWN ERROR after "updating signature" step, every single time (I tried couple of times). The version-main started missing after the first flash, the 2nd flash there is no
version: x.xxx.xxx to version x.xx.xx
Click to expand...
Click to collapse
just
From version: <blank> to version x.xx.xx
Click to expand...
Click to collapse
Now I remember in the past, updating my sister in-law's Rhyme, this also happen, but somehow, it succeeded in updating the device anyway. So I didn't think too much of it.
So, after hitting the wall for a while, I looked up why people love 4ext so much for HTC devices, turn out there is this SmartFlash thing and how flashing boot.img is tricky. Well I switch to 4ext 1.0.0.5 and flash CM 9.1.0 (just want to be safe, so I didn't flash Albinoman again). And what do you know, it works .
So that is my story so far. I just want to know is there any ICS RUU to fallback to stock for my Device or do I have to SuperCID to get it from other Device. or Maybe I have to downgrade firmware, install GB RUU and then update through OTA (or maybe I have to search for the OTA also).
in order to downgrade you have to S-OFF and supercid
then you can use the gb RUU which also downgrades firmware and hboot version
after that just do the official update
about OTA it could be a possibility to use it but you must have stock recovery
edit:i just saw your edit.you are already in ics firmware
HELP ME
I NEED SHIP ROM HTC ONE MINI DIRTRIST ASIS
INFORMATION:
INFOversion: 0.5
INFOversion-bootloader: 2.22.0000
INFOversion-baseband: 1.24.40e.00.26
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.10.707.3
INFOversion-misc: PVT SHIP S-ON
INFOserialno: HT428WA01630
INFOimei: 355865057500040
INFOmeid:
INFOproduct: m4_u
INFOplatform: HBOOT-8930
INFOmodelid: PO5810000
INFOcidnum: HTC__044
INFObattery-status: good
INFObattery-voltage: 4313mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-09ff2ded
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
hhmobile said:
HELP ME
I NEED SHIP ROM HTC ONE MINI DIRTRIST ASIS
INFORMATION:
INFOversion: 0.5
INFOversion-bootloader: 2.22.0000
INFOversion-baseband: 1.24.40e.00.26
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.10.707.3
INFOversion-misc: PVT SHIP S-ON
INFOmeid:
INFOproduct: m4_u
INFOplatform: HBOOT-8930
INFOmodelid: PO5810000
INFOcidnum: HTC__044
INFObattery-status: good
INFObattery-voltage: 4313mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-09ff2ded
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
Click to expand...
Click to collapse
Hi,
You should edit your post and remove :
INFOserialno:
INFOimei:
Heyy, so i was wondering if yous could help me. I have a stock HTC Sensation EU, t-mobile version, which I had updated to the latest version (4.0.3 I think). During the upgrade-process something went wrong and now it doesn't go past the HTC logo. S-ON. When in Hboot it shows no found something.img. What is the way to fix this?
If possible I'd like to root it as well and use the Cyanogenmod.
HI, is it possible to you to go In Recovery Mod or Fastboot???
If it's yes,
Go here :
[GUIDE][N00b] Flash a ROM from 100% Stock!
This is a guide that give u all the way to unlock ur bootloader, change your stock recovery with a custom one (4ext).
Then u'll be able to install a ROM custom.
Here u can found a lot of ROM Developped for HTC SENSATION.
Sensation Android Development
blogodoblogodo said:
HI, is it possible to you to go In Recovery Mod or Fastboot???
If it's yes,
Go here :
[GUIDE][N00b] Flash a ROM from 100% Stock!
This is a guide that give u all the way to unlock ur bootloader, change your stock recovery with a custom one (4ext).
Then u'll be able to install a ROM custom.
Here u can found a lot of ROM Developped for HTC SENSATION.
Sensation Android Development
Click to expand...
Click to collapse
Seems good, i´ll try it out
blogodoblogodo said:
HI, is it possible to you to go In Recovery Mod or Fastboot???
If it's yes,
Go here :
[GUIDE][N00b] Flash a ROM from 100% Stock!
This is a guide that give u all the way to unlock ur bootloader, change your stock recovery with a custom one (4ext).
Then u'll be able to install a ROM custom.
Here u can found a lot of ROM Developped for HTC SENSATION.
Sensation Android Development
Click to expand...
Click to collapse
So it worked, but it didn't. I managed to install a custom rom, but after 10 seconds (if it even was that much), the system crashes and reboots, only to do the same thing again.
I used a RUU as well but I got a signing error (132) when using the RUU. I then tried installing the RUU through fastboot and I got further. I did however got the error saying the CID wasn't matching. In the .txt file from the zip I had added my CID, So I thought it had to work.
There is no official rom for my cid (T-MOB003) unfortunately.
This is starting to give me a headache
Search for this HERE
blogodoblogodo said:
Search for this HERE
Click to expand...
Click to collapse
Well DEFINITELY not there.
Those are Sensation XL.
Here's for our Sensation http://forum.xda-developers.com/showthread.php?t=1672425
Hoooooooo, Nooo,
Sorry ,really sorry
I googled "T-MOB003 for SENSATION"
Sorry DrNickjen
Thank You Nicx59
Nicx59 said:
Well DEFINITELY not there.
Those are Sensation XL.
Here's for our Sensation http://forum.xda-developers.com/showthread.php?t=1672425
Click to expand...
Click to collapse
I have read that once, but I'll do it again; this time more thorougly.
The RUU I'm trying to install is RUU_PYRAMID_ICS_HTC_Europe_3.32.401.5_Radio_11.69.3504.00U_11.22.3504.07_M_release_246089_signed
fastboot getvar all returns
Code:
c:\Android>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.18.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.50.114.2
(bootloader) serialno: xxx
(bootloader) imei: xxx
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5813000
(bootloader) cidnum: T-MOB003
(bootloader) battery-status: good
(bootloader) battery-voltage: 4104mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 9d24123f
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Since my cidnum is not in the RUU, (and there isn't a RUU for my cid) I'll have to add it according to the guide. I'll get to that later. hboot version to install and version-main are both higher than currently installed, so that shouldn't be an issue.
My phone is S-ON, but unlocked so I'll have to relock it again. Followed instructions and device is *** RELOCKED ***. Displays, however, a security warning. I'll now proceed with the installation by executing the exe. If I'm right I should see an error.
Error: Customer ID incorrect, as expected. I'll now try to install manually.
Since my CID is different I'll change it in the .zip. 7z didn't allow me to change it in the archive itself so I've extracted the archive, changed android-info.txt to:
Code:
modelid: PG5813000
cidnum: HTC__001
cidnum: HTC__E11
cidnum: HTC__N34
cidnum: HTC__203
cidnum: HTC__102
cidnum: HTC__405
cidnum: HTC__Y13
cidnum: HTC__A07
cidnum: HTC__304
cidnum: HTC__032
cidnum: HTC__016
cidnum: T-MOB003
mainver: 3.32.401.5
hbootpreupdate:12
DelCache:1
Note: When pasting this my CID was placed on the same line as mainver. Inserted an enter and repasted in android-info.txt.
What I did as well was unlock the bootloader again, changed recovery to the file inside the rom.zip, and relocked the bootloader. I read this was a fix for the problem.
THIS POST IS IN PROGRESS
HI its not necessary to show ure imei, plz, edit your post and Erase it.
blogodoblogodo said:
HI its not necessary to show ure imei, plz, edit your post and Erase it.
Click to expand...
Click to collapse
Thanks.
Just Hit ThAnks Button
So For you, is it good???
blogodoblogodo said:
Just Hit ThAnks Button
So For you, is it good???
Click to expand...
Click to collapse
Nope. I gave up fot the day because I couldn't het the PG58IMG flashed. It didn't have an effect in hboot so I tried using fastboot but i got an unknown error. The tries installing ViperS 2.0, which succeeded. On boot, however, the system crashed and rebooted automatically, just like the other rom's i've tried.
If only I could get a rom working...
DrNickjen said:
Nope. I gave up fot the day because I couldn't het the PG58IMG flashed. It didn't have an effect in hboot so I tried using fastboot but i got an unknown error. The tries installing ViperS 2.0, which succeeded. On boot, however, the system crashed and rebooted automatically, just like the other rom's i've tried.
If only I could get a rom working...
Click to expand...
Click to collapse
actually if you are still on gingerbread firmware you can't boot any ics or jb rom
flash this rom from recovery
http://d-h.st/bqL
if you still want to upgrade to ics then S-OFF the device from here
http://revolutionary.io/
after that flash 3.33 universal from here
http://forum.xda-developers.com/showthread.php?t=1459767
follow the instructions to the letter
and before flashing check md5 sums(important)
then flash any ics or jb rom from recovery
rzr86 said:
actually if you are still on gingerbread firmware you can't boot any ics or jb rom
flash this rom from recovery
http://d-h.st/bqL
if you still want to upgrade to ics then S-OFF the device from here
http://revolutionary.io/
after that flash 3.33 universal from here
http://forum.xda-developers.com/showthread.php?t=1459767
follow the instructions to the letter
and before flashing check md5 sums(important)
then flash any ics or jb rom from recovery
Click to expand...
Click to collapse
Flashed it using Cwm, first did a full wipe and it installed fine. It then booted en got to a black screen and rebooted. Wiping Dalvik cache + /cache didn't work as a solution.
Same thing as any other .zip I've installed through recovery.
DrNickjen said:
Flashed it using Cwm, first did a full wipe and it installed fine. It then booted en got to a black screen and rebooted. Wiping Dalvik cache + /cache didn't work as a solution.
Same thing as any other .zip I've installed through recovery.
Click to expand...
Click to collapse
can you post your bootloader details again and what rom did you try to flash now?
also did you try to follow the steps i gave you?
rzr86 said:
can you post your bootloader details again and what rom did you try to flash now?
also did you try to follow the steps i gave you?
Click to expand...
Click to collapse
UNLOCKED
Pyramid PVT SHIP S-ON RL
HBOOT-1.18.000
eMMC-boot
August 2nd 2011
Tried to flash the rom you linked to and yes I have.
DrNickjen said:
UNLOCKED
Pyramid PVT SHIP S-ON RL
HBOOT-1.18.000
eMMC-boot
August 2nd 2011
Tried to flash the rom you linked to and yes I have.
Click to expand...
Click to collapse
change the recovery to 4ext
before flash the rom enable smartflash from 4ext
rzr86 said:
change the recovery to 4ext
before flash the rom enable smartflash from 4ext
Click to expand...
Click to collapse
I love you omg it worked <3 <3
So, what do I have to do in order to get e.g. Cyanogenmod running?
DrNickjen said:
I love you omg it worked <3 <3
So, what do I have to do in order to get e.g. Cyanogenmod running?
Click to expand...
Click to collapse
First make a full backup of your device through 4ext.
Then just flash the zips from one of the following releases:
android1234567's release (here you have to flash rom and kernel seperately)
albinoman887's releease
And last flash gapps from here
DrNickjen said:
I love you omg it worked <3 <3
So, what do I have to do in order to get e.g. Cyanogenmod running?
Click to expand...
Click to collapse
see my previous post of what to do now
S-OFF
flash 3.33 universal(check md5 sums before flashing)
flash cyanogenmod rom
done
note:when you achieve S-OFF you won't need anymore the smartflash feature
hi guys
when i first bought the phone back in the day
it was perfect
i started installing cm9 or cm10 ( when it used to update the radio)
then later if i recall cm10 i started having the helicopter issue where it would keep pressing the home button by its self
a few weeks later a new CM build with a new radio fixed it but introduced a new issue
it would randomly drop my calls
so i decided to S-OFF and try flashing a radio
this is before s-ff
HTML:
One S (s4)
twrp 2.5
S-on
T-mobile US
CM10.2
kernel 3.4
Hboot 2.15
openDsp v31.1.0.45.0815
current raido :1.11.50.05.28_10.27.50.08L
using the getvar method
i get this
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4010000
(bootloader) cidnum: HTC__203
using fastboot getvar version-main
Version-main : ( BLANK)
s-offing wasnt fun
my phone was no longer able to boot in stock or custom roms
but i was able to flash radios
so what i did was flash a radio then s-offed by doing this
i tried radio 1.13 and 1.15 with the same issue
it shows the new radio in About (CM11) and in fastboot
err I'm not really into this stuff, but I think u need supercid
riboswitch said:
err I'm not really into this stuff, but I think u need supercid
Click to expand...
Click to collapse
i already did that
my phone doesnt like s-off
other people also experienced this
i still have odd issues with 1.15 (calling)