Database Info

[Q] Is that end of my p-920 ?

Well, I have LG Optimus P-920
since morning working on CM 7 Nightly 23
today I was replaced sdcard to 32GB 10, reboot phone and.... nothing
even pwr+vol up not working, totally not responding
I've tried reflash on LG flash tool but after connect to usb with vol up computer recognize omap4430, thats ok, but that device blinking in device manager, one second is there, one not , no LG USB CDMA serial port
what should I do in that case, please help me

You replaced sd card. Did you try switching back some times s*** messes up. And doing the follow steps you listed. Throw some tips guys. Bump.
Sent from my LG-P925g using XDA App

winb87 said:
You replaced sd card. Did you try switching back some times s*** messes up. And doing the follow steps you listed. Throw some tips guys. Bump.
Sent from my LG-P925g using XDA App
Click to expand...
Click to collapse
switching back ?

You switched sd card? Switch back to the one you had before.
Sent from my LG-P925g using XDA App

winb87 said:
You switched sd card? Switch back to the one you had before.
Sent from my LG-P925g using XDA App
Click to expand...
Click to collapse
switched back, still no response..:/

I posted a thread with the same issue a few weeks back.
No, it's not the end of your phone. You'll need xp/7 to repair the phone (since I'm on linux I can't currently repair it).
Use the LG tool, remove battery and insert it back, plug in usb and hold pwr+volup(or down) can't remember which one. Your PC will find a OMAP4430 device.
There is a few threads how you can repair your phone using emergency mode in the LG tool, you'll need to enter your IMEI etc.. Look in the Development section and look for the right thread.
My thread:
http://forum.xda-developers.com/showthread.php?t=1439373

I've tried that resolution, but t dont works, omap4430 blinking in device manager, cant use lg flash tool

Did you really press the right volume button? I've had that blinking-problem,too, until I pressed the other volume button instead.
And there's no need holding the power-button for doing this.

w8st8 said:
Did you really press the right volume button? I've had that blinking-problem,too, until I pressed the other volume button instead.
And there's no need holding the power-button for doing this.
Click to expand...
Click to collapse
I think...... but I'll try again
trying......still blinking
please give me what should i do step by step, any sequence I tried doesn't work still blinking

Remove battery and blink will stop!

ul71m0 said:
Remove battery and blink will stop!
Click to expand...
Click to collapse
still blinking, even after battery removing

andriu123 said:
still blinking, even after battery removing
Click to expand...
Click to collapse
Try reading this
http://forum.xda-developers.com/showthread.php?p=21096612
good luck

You could get it back andriu? I'm in the same situation, the pc still blinking in any combinations and the driver omap 4430 never installed.
Sorry for my bad english.

vanpe said:
You could get it back andriu? I'm in the same situation, the pc still blinking in any combinations and the driver omap 4430 never installed.
Sorry for my bad english.
Click to expand...
Click to collapse
my english is poor to
about phone, hmm
today he went to service warranity , no solution has helped, i tried everything
we'll see what say service engineers, I hope that will fix him

andriu123 said:
my english is poor to
about phone, hmm
today he went to service warranity , no solution has helped, i tried everything
we'll see what say service engineers, I hope that will fix him
Click to expand...
Click to collapse
You tried to install the drivers from xp? I'll try this before use the warranty.
How much time have your O3D?

tried on XP, Vista, 7
O3d have since about six months

Have you tried different USB cable? Had same problem with Odin and Galaxy S2, odin would fail flashing and not detected sometimes.
Sent from my GT-I9100 using XDA App

MemoryController said:
Have you tried different USB cable? Had same problem with Odin and Galaxy S2, odin would fail flashing and not detected sometimes.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
Yes I have tried differents USB cables (3 concretely). I'm desperate.

Once I bricked my phone y recovered it installing all the drivers including the omap one and using the kdz falshing tool.. if the omap chip is still functioning there is still a chance

josuelopezv said:
Once I bricked my phone y recovered it installing all the drivers including the omap one and using the kdz falshing tool.. if the omap chip is still functioning there is still a chance
Click to expand...
Click to collapse
Where do you get the omap drivers? Automatically whit the O3D in emergency mode?
My computer detects that driver but not install it, seems like a bucle try/error/try/error.

very serious problem with my 3d optimus omap 4430

Hi, I have a lg 3d optimus flashee it wrong and now not even get the lg logo, the computer detects it as I omap 4430 but I installed the drivers, I followed step by step this thread http://forum .xda-developers.com/showpost.php? p = 17177547 & postcount = 2 but I can not install the driver omap 4430, the only solution is to solder? as I do if I have no soldering tools here needed? someone could take a hand?

anyone?

Dude don't do anything drastic. Is imap flashing on and off when you connect. Many have problems with getting into download mode. You have to do it just right.
Sent from my LG-P920 using xda premium

Bdadd34 said:
Dude don't do anything drastic. Is imap flashing on and off when you connect. Many have problems with getting into download mode. You have to do it just right.
Sent from my LG-P920 using xda premium
Click to expand...
Click to collapse
just watch trekfan's video. he shows a little trick with the battery.

kevin_23 said:
Hi, I have a lg 3d optimus flashee it wrong and now not even get the lg logo, the computer detects it as I omap 4430 but I installed the drivers, I followed step by step this thread http://forum .xda-developers.com/showpost.php? p = 17177547 & postcount = 2 but I can not install the driver omap 4430, the only solution is to solder? as I do if I have no soldering tools here needed? someone could take a hand?
Click to expand...
Click to collapse
the easiest way is to just download the software update LGMobile support tool
http://www.lg.com/uk/support/mc-support/mobile-phone-support.jsp
launch the software. Take out battery, attach usb to pc, then hold volume up and power at same time, the software will see phone, select customer support then recovery or something like this – type IMEI number and then software will just re download and flash the phone to repair. the phone will have power for the flashing via the usb. when it finished just re attach battery and turn phone on.

If omap4430 keeps connecting and disconnecting,neither lg flashtoor nor lg mobile updater will help in this case.
You need to find a 2nd stage bootloader for the phone or see if LG agrees to repair it.
btw I'm in the same boat

Thread will be moved. Based on the fact it's not:
A ROM [X]
Mod [X]
Kernel [X]
Thank you for your compliance, hope you get your phone working.

If someone could modify the omapflash tool for o3d,the problem would be resolved.

thanks for all reponses, and and how could solder the USB cable? what tools I need or where I could do?

if it keeps connecting and the disconneting try this. attach usb cable to PHONE only then take your battery out, then put battery back in and quickly press volume up button and then attach usb cable to PC. keep hold of volume up button all time dont let go and install all drivers omap, usb driver etc.
hope it helps

iqb043 said:
if it keeps connecting and the disconneting try this. attach usb cable to PHONE only then take your battery out, then put battery back in and quickly press volume up button and then attach usb cable to PC. keep hold of volume up button all time dont let go and install all drivers omap, usb driver etc.
hope it helps
Click to expand...
Click to collapse
Yep it always does that to me. Omap is con and disc always for me and i never bricked my phone. Use the metod above and u shoud be grand.
Sent from my LG-P920 using XDA

what did you flash to your phone that caused brick?

Same problem here. I sent it back to LG, as the phone is in warranty, but if there is a solution, I wish to know it, in order to avoid sending again the phone to LG if the problem repeats... hehe...

sergiocues said:
Same problem here. I sent it back to LG, as the phone is in warranty, but if there is a solution, I wish to know it, in order to avoid sending again the phone to LG if the problem repeats... hehe...
Click to expand...
Click to collapse
+1
Sent from my LG-P920

search resurrection guide
Send from my XBSA ICS V7.2 P920.

I tried it, but I cannot do nothing, because omap still connects and disconnect

thats what it does
Send from my XBSA ICS V7.2 P920.

I have the same problem........i bought this phone long time ago and i just found it while cleaning my room........i thought that maybe i should update it since its still running Gingerbread.....i tried almost everything but nothing seems to be working...omapboot is not working, lg flashtool is not working...the phone is not showing any signs of life.....the only time it responds is when i connect it to my pc and it shows up as OMAP4430 TI Board.....
HELP NEEDED, I dont want to loose this phone

[Q] My Galaxy Fit Is In Danger

Few days later i tried to flash firmware 2.3.4 to my galaxy fit via odin but the process failed and after it my phone does't boot and not going into download mode...the phone has only a blank screen no key is working...when conected to charger a little beeping sound is produced but the screen remain black...then i take the phone to care centre in my area he tried a usb jig but nothing happend the phone still dead...please help me i am in a big problem i love my phone and don't want to lose it...:crying:

Try this
manpreet135 said:
Few days later i tried to flash firmware 2.3.4 to my galaxy fit via odin but the process failed and after it my phone does't boot and not going into download mode...the phone has only a blank screen no key is working...when conected to charger a little beeping sound is produced but the screen remain black...then i take the phone to care centre in my area he tried a usb jig but nothing happend the phone still dead...please help me i am in a big problem i love my phone and don't want to lose it...:crying:
Click to expand...
Click to collapse
Try this...
1. Install mobile drivers on pc and open Odin.exe
2. Connect phone to pc. Remove the battery.
3. Now, hold down VOLUME(-) and HOME key and POWER key together to get download mode.
4. While holding these 3 keys, (and your phone stll connected to pc) insert the battery.
Now Odin should detect your phone. If still it doesn't , then take it to the center.
If odin detects phone, flash the official firmware.
Hope it helps.

That Does't Work
Mr.Attitude02 said:
Try this...
1. Install mobile drivers on pc and open Odin.exe
2. Connect phone to pc. Remove the battery.
3. Now, hold down VOLUME(-) and HOME key and POWER key together to get download mode.
4. While holding these 3 keys, (and your phone stll connected to pc) insert the battery.
Now Odin should detect your phone. If still it doesn't , then take it to the center.
If odin detects phone, flash the official firmware.
Hope it helps.
Click to expand...
Click to collapse
I have tried all the tricks but no one is working even the Technician has tried the JIG but it also give no Help...if you know any other effective hardware or software to fix this problem than pls tell me......and I also heard about JTAG BOX...can this hardware fix my problem?,this should not be as a JIG coz JIG can't solve my problem and from where i can get this if the care centre or technician haven't...

Mr.Attitude02 said:
Try this...
1. Install mobile drivers on pc and open Odin.exe
2. Connect phone to pc. Remove the battery.
3. Now, hold down VOLUME(-) and HOME key and POWER key together to get download mode.
4. While holding these 3 keys, (and your phone stll connected to pc) insert the battery.
Now Odin should detect your phone. If still it doesn't , then take it to the center.
If odin detects phone, flash the official firmware.
Hope it helps.
Click to expand...
Click to collapse
Exactly what I posted. Thanks for telling...
Sent Via XDA™ Premium

option 2
here is the thread <http://forum.xda-developers.com/showthread.php?t=1349547>
by Ajay: Thanks to jtag box . I got delhi's dealer's address from official jtag site. I contacted him and he repaired boot with jtag.
he was able to solve his issue.
contact or PM him for ur concern
---------- Post added at 12:35 PM ---------- Previous post was at 12:30 PM ----------
Galaxy_Rohit said:
Exactly what I posted. Thanks for telling...
Sent Via XDA™ Premium
Click to expand...
Click to collapse
hmm
Mr.Attitude02_ROHIT took help from Galaxy_Rohit
just thot ur comment wud solve his prob.

manpreet135 said:
I have tried all the tricks but no one is working even the Technician has tried the JIG but it also give no Help...if you know any other effective hardware or software to fix this problem than pls tell me......and I also heard about JTAG BOX...can this hardware fix my problem?,this should not be as a JIG coz JIG can't solve my problem and from where i can get this if the care centre or technician haven't...
Click to expand...
Click to collapse
Here's the Jtag box dealers' list
http://www.jtagbox.com/category/jtag-dealers/
Here're the shops where you can unbrick your phone
http://www.jtagbox.com/riff-jtag-bo...s-unbrick-bricked-phone-riff-box-owners-list/
And here's the official page of RIFF JTAG Samsung Galaxy Fit GT-S5670 unbrick BOOT REPAIR SUPPORTED
www.jtagbox.com/jtag-news/riff-jtag-samsung-galaxy-fit-gts5670-unbrick-boot-repair-supported/
Sent Via XDA™ Premium

[Q] LG optimus 3d p925g bricked

I've looked at the similar threads , to be honest even if one of the suggestions might work , none of the people seem to have the same problem from my understanding.
So apologize ahead of time as i imagine someone has bricked in a similar fashion in some thread buried somewhere.
But have an unlocked P925g lg optimus 3d, got a few days ago.
Last night i rooted just fine , root checker says it was rooted properly.
Then i installed rom manager as i was following manbearpigs post.
When i got to flash clockwork mod , i clicked the button and it looked like it was doing some flashing , but the phone turned off to reboot??
and now when i power on the lg logo appears and then the screen goes funny.
If i try to hold the power down and 3d button , i get a green screen . However i'm very unsure of what to do next.
However when i plug into usb the phone goes black , refuses to turn back on until i take the battery out.
I'd pay someone here if i could , but i'll take any help i can get.
Appreciate any help.

I don't KNOW, but just an idea:
May be your phone is stuck in download mode?
With this latest ICS (original, not ported) my phone shows black screen when in download mode (no message SW UPDATE and something in Korean).
Did you try to plug your phone to PC? Does your comp see it?
From what I read flashing wrong CWM might cause problems...
Also try to read Ressurection thread by xbsa, it helped me couple times
Don't give up!
Sent from my LG-P920 using xda app-developers app

My computer does see the phone if i take the battery out , and push the volume down while it connects. However when it connects , it cannot find drivers that it find originally.
I'd be happy just to have the phone back to froyo right now , however i am not giving up , just asking for advice. Will reply once i look at the resurrection post you suggested.

odanhammer said:
My computer does see the phone if i take the battery out , and push the volume down while it connects. However when it connects , it cannot find drivers that it find originally.
I'd be happy just to have the phone back to froyo right now , however i am not giving up , just asking for advice. Will reply once i look at the resurrection post you suggested.
Click to expand...
Click to collapse
just try the LG flash tool to flash without reinstalling drivers, if it doesn't flash you have to uninstall all LG drivers, reboot your computer, install again LG drivers and flash Bin files using Flash tool, you don't have to flash Bin and fls files at the same time, first Bin file, if there is no network close LG flash, open it again and flash Fls at second time to get the right baseband (sometimes it not necessery to flash this fls files)
or just follow this guide
http://www.technopat.net/forum/android-telefonlari/9128-lg-optimus-3d-ultimate-flash-guide.html

odanhammer said:
My computer does see the phone if i take the battery out , and push the volume down while it connects. However when it connects , it cannot find drivers that it find originally.
I'd be happy just to have the phone back to froyo right now , however i am not giving up , just asking for advice. Will reply once i look at the resurrection post you suggested.
Click to expand...
Click to collapse
To get to download mode you need to keep battery in, remove sim and SD card. Hold vol+ and plug USB cable. You should see message SW UPDATE and some Korean. My phone now doesn't show it, just blank screen. But LG Flash sees it and u can flash bin fls.
Sent from my LG-P920 using xda app-developers app

Remove drivers and use the LGMobile Support Tool to install the drivers, if your phone is connected it should detect it and finish the install process. I believe the P925G is a Rogers device? You might have to select Rogers as your carrier to find the drivers.

Android1993 said:
Remove drivers and use the LGMobile Support Tool to install the drivers, if your phone is connected it should detect it and finish the install process. I believe the P925G is a Rogers device? You might have to select Rogers as your carrier to find the drivers.
Click to expand...
Click to collapse
ok so i've deleted all lg related material from my computer, when i connected the phone to the computer with battery in , nothing happens.
Without battery , it detects automatically , then it continues a loop of picking it up and dropping off .
So i moved to my laptop , attempted to follow the guide kupuku posted, however after getting the went logo on the phone , it never gets past that stage no matter what i do.
I've also tried LG support tool , it doesn't detect my phone on either my computer or laptop , even after installing/reinstalling the proper drivers.
LG does have a live chat which isn't open and the phone number can not be reached from my area.. i imagine its a 1800 number for asia or something as i do live in Canada.
My only other choice is to take the phone down to a guy that can get it out of boot loop for close to what i paided for the phone a few days ago.
Least to say , that option is something i want to do , nor can i afford to do.
once again i apprecaite the help that has been given , and for any that will be given.
edit:
Ok so i got lg mobile support to work by doing recovery and entering my imei number. Its currently at 4% but its been close to an hour and a half. Might restart and see if that works , but my phone is doing the logo boot repeat pattern still , even during this update. so not sure what exactly is happening.

[Q] Cannot repair Hardbrick

Hello Community,
I joined XDA because I have a bad problem with my One Plus One.
It becomes Hardbricked =S
So I started to ask Google for help and there was this Thread:
//forums.oneplus.net/threads/solution-recover-from-hard-bricked-oneplus-one.104943/
So I tried it but I was not able to solve the Problem. At beginning of the Tutorial I have the problem that my device ist not recognized by the "chinese" software if I use VolUp + Power, but if I try it with VolDown + Power I can see it. So I go on with the tutorial but then I have to click the big button in the upper right corner and the line with my One Plus goes red, so I read this is wrong. After some more try's I gave up.
I think I have no driver problem, because there comes no error at or after the installation.
I use Windows 7/8.1 and the driver from the downloaded ISO not Qualcomm, because I don't get them work. Also I tried Windows XP as VM but there I was not able to install any driver =/
Now my question are there some more tricks and tipps to get Color OS installed?
Thank's for your help.
graphik_

graphik_ said:
Hello Community,
I joined XDA because I have a bad problem with my One Plus One.
It becomes Hardbricked =S
So I started to ask Google for help and there was this Thread:
//forums.oneplus.net/threads/solution-recover-from-hard-bricked-oneplus-one.104943/
So I tried it but I was not able to solve the Problem. At beginning of the Tutorial I have the problem that my device ist not recognized by the "chinese" software if I use VolUp + Power, but if I try it with VolDown + Power I can see it. So I go on with the tutorial but then I have to click the big button in the upper right corner and the line with my One Plus goes red, so I read this is wrong. After some more try's I gave up.
I think I have no driver problem, because there comes no error at or after the installation.
I use Windows 7/8.1 and the driver from the downloaded ISO not Qualcomm, because I don't get them work. Also I tried Windows XP as VM but there I was not able to install any driver =/
Now my question are there some more tricks and tipps to get Color OS installed?
Thank's for your help.
graphik_
Click to expand...
Click to collapse
If you can get into bootloader mode you are golden. Just reflash stock firmware, such as cyanogenmod 44S.

Thanks for your answer.
I think I am not able to reflash something, because if I try to go into bootloader or recovery or simply to boot I only hav a black screen =\
In cause of this I used the tutorial from above.

Is the device recognized on the computer at all?

I am realy sorry of such an late answer, but I get into some trouble.
But b2t, yes the device is recognized as "QHSUSB_BULK" in Hardware Manager, also Windows recognize some partition wich should ne formated. I never have done this at the moment ^^

Have you looked here?
http://forum.xda-developers.com/showthread.php?t=2835696
Transmitted via Bacon

Thank you, now I am on page 14 and will try the instructions from netbuzz.