Database Info

Stuck With Boot Screen

I have Samsung Galaxt Tab 2 7". Yesterday to install custom firmware, I flashed some wrong recovery on it.
Now, when I turn it on it is stuck on Samsung Initial boot logo and stays there as long as possible.
If I turn it off and bring it to download mode (Press and Hold Power and Down Volume Key), it comes into download more but when connected to PC, it says USB Device Not Recognized.
I tried charging my Tab whole night, it became warm and till morning it was warm only. Now I am completely stuck and don't know what to do.
Is there any solution for this? Is there any button combination which can take the tab at-least to stock android?
Since USB is not been recognized, so I am helpless to do anything here.

Sent from my RM-917_nam_usa_100 using XDA Windows Phone 7 App

anshumangoyal said:
I have Samsung Galaxt Tab 2 7". Yesterday to install custom firmware, I flashed some wrong recovery on it.
Now, when I turn it on it is stuck on Samsung Initial boot logo and stays there as long as possible.
If I turn it off and bring it to download mode (Press and Hold Power and Down Volume Key), it comes into download more but when connected to PC, it says USB Device Not Recognized.
I tried charging my Tab whole night, it became warm and till morning it was warm only. Now I am completely stuck and don't know what to do.
Is there any solution for this? Is there any button combination which can take the tab at-least to stock android?
Since USB is not been recognized, so I am helpless to do anything here.
Click to expand...
Click to collapse
Hm, Odin needs Samsung USB Drivers to be able to recognize device, did you already install them?
If not, you can download it here.
(If you're using Windows 8, tell me, because you will need some special method to install the drivers.)

fr4n said:
Hm, Odin needs Samsung USB Drivers to be able to recognize device, did you already install them?
If not, you can download it here.
(If you're using Windows 8, tell me, because you will need some special method to install the drivers.)
Click to expand...
Click to collapse
Thanks, I have tried and it is the same. Yes, I am using Windows 8. Please let me know what special things needs to be done with this.
Thanks again. Your English is better than me, though it is also not my first language :laugh:

anshumangoyal said:
Thanks, I have tried and it is the same. Yes, I am using Windows 8. Please let me know what special things needs to be done with this.
Thanks again. Your English is better than me, though it is also not my first language :laugh:
Click to expand...
Click to collapse
I bet you tried to run the .exe file and the installation didn't even start, no? xD
Follow installation method 3 explained in this thread.
If you can't do it, let me know and I can help you!
I'm not pretty good with English too... I know only basic skills, but I bet I can't go to English-speaking countries with them :laugh:

fr4n said:
I bet you tried to run the .exe file and the installation didn't even start, no? xD
Follow installation method 3 explained in this thread.
If you can't do it, let me know and I can help you!
I'm not pretty good with English too... I know only basic skills, but I bet I can't go to English-speaking countries with them :laugh:
Click to expand...
Click to collapse
I followed all steps. But still I am getting my USB Device is not been recognized. It is showing "Unknown USB Device (Device Descriptor Request Failed)"
Till now I am unable to find any solution.

anshumangoyal said:
I followed all steps. But still I am getting my USB Device is not been recognized. It is showing "Unknown USB Device (Device Descriptor Request Failed)"
Till now I am unable to find any solution.
Click to expand...
Click to collapse
Hm, that was totally unexpected.
I hope I'm wrong, but it sounds like your board got damaged. But if the board was damaged, it won't ever turn on. So my mind is a bit twisted here.
I will try to look for solutions. For now, you're stuck with a paperweight :s

anshumangoyal said:
I followed all steps. But still I am getting my USB Device is not been recognized. It is showing "Unknown USB Device (Device Descriptor Request Failed)"
Till now I am unable to find any solution.
Click to expand...
Click to collapse
Do you have a Linux computer? Of you do, PM me and I will send you instructions that you can try to follow.
Sent from my SGH-T989

jrc2 said:
Do you have a Linux computer? Of you do, PM me and I will send you instructions that you can try to follow.
Sent from my SGH-T989
Click to expand...
Click to collapse
I don't have a linux computer. But I can install a virtual machine for that. Can you please send me instructions how to do that. Thanks again.

anshumangoyal said:
I don't have a linux computer. But I can install a virtual machine for that. Can you please send me instructions how to do that. Thanks again.
Click to expand...
Click to collapse
Sorry, I must have missed this post. I don't know if a VM will work or not. I think the problem is windows 8 as there have been lots of problems reported with Odin and Heimdall (probably the drivers) on windows 8.
Sent from my SGH-T989 using Tapatalk
EDIT: I have a thread in the general section for the tab 2 on rooting in Linux. Do everything up until flashing SuperSU. That thread has the instructions on how to install recovery. Still do it with no reboot checked and manually boot into recovery and wipe cache and Dalvik cache. Hope this helps!
EDIT 2: Here is the link to the thread: http://forum.xda-developers.com/showthread.php?t=2828080

Strangest "Bricked" Oneplus One: No recovery, locked OS, can't unlock bootloader

Strangest "Bricked" Oneplus One: No recovery, locked OS, can't unlock bootloader
Hi there, I've come in to the possession of the most stubbornly bricked phone that I've ever seen . Bought a OPO off Craigslist, someone cracked the screen and sold it for cheap instead of fixing it. It had been remote wiped but still has some strange difficult software. Posted this problem to the Oneplus Forum but have had no response, thought XDA would be more qualified!
From what I can tell it's a Oneplus One that was sold through a re-seller that replaced all the software on the phone with a high-security version of Android. It's called EncroChat and from their website (encrochat.network or encrochatsure.com) it looks like it removes the recovery from the phone and replaces it with an EncroChat OS (some kind of Cyanogen) that you can boot to in addition to the Android OS.
Well I assume during the remote wipe something went wrong with the software and the phone no longer really functions. It boots up fine but can't connect to Wifi, cellular, not detected when connected to my PC, and has no real apps to speak of. I think most of the device's drivers are missing. Trying to boot to recovery instead boots to their EncroChat OS which is locked behind a password that neither I nor the person I bought it from knows.
I can get to fastboot and my PC will detect the phone then but running the bootloader unlock command doesn't work, the phone just reboots into the locked EncroChat OS. My idea now is to try and hardbrick the phone and then re-do everything on the phone over again, but I can't figure out how to do that. Does anyone else have any ideas?

Contacting EncroChat
Tried contacting EncroChat via email form, twitter, and reddit. No luck! Still stuck with this. I want to try this unbrick guide: http://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732 for hardbricks but I can't get my phone to show as QHSUSB_BULK or Qualcomm HS-USB QDLoader 9008. Any idea how I can do that? This guy seems to have done it:
evronetwork said:
Had one GOOD soft brick in the past, I've used coloros rom(from the Chinese OnePlus One) and fix my phone ...it deleted all media of course but manage to unbrick the phone. Don't ask me how to, it's been a while, google it
It would fix even the most stubborn soft bricks you'll see. Before that I tried everything that was available at the time, no boot as well only fastboot(not even recovery)
Click to expand...
Click to collapse

broccolicakes said:
Tried contacting EncroChat via email form, twitter, and reddit. No luck! Still stuck with this. I want to try this unbrick guide: http://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732 for hardbricks but I can't get my phone to show as QHSUSB_BULK or Qualcomm HS-USB QDLoader 9008. Any idea how I can do that? This guy seems to have done it:
Click to expand...
Click to collapse
For your phone to be recognized in your PC as QHSUSB_BULK or Qualcomm HS-USB QDLoader 9008, you need to install proper drivers. follow this guide
http://www.androidbrick.com/ultimat...agons-are-unbrickable-qhsusb_dload_qpst_qfil/
let me know, if I can help you furthermore.

broccolicakes said:
Tried contacting EncroChat via email form, twitter, and reddit. No luck! Still stuck with this. I want to try this unbrick guide: http://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732 for hardbricks but I can't get my phone to show as QHSUSB_BULK or Qualcomm HS-USB QDLoader 9008. Any idea how I can do that? This guy seems to have done it:
Click to expand...
Click to collapse
Hello dude,
While it was quite some time when I did this unbrick, it was successful ...expect ALL data to be deleted from phone. Google is your friend and I did get all the files from somewhere
You use a special software from the phone, it's coloros software and with provided files it recognise the phone and flash it(2-3 seperate flashes through the software if I remember correctly) - don't worry as long as the phone turns on(mine was turning on but did nothing ...blank, only way to turn it off was to hold power button and hold it(forced turn off))
P.S. The phone wasn't recognised by the OS ...only from this app(cool? ..weird if you ask me - I'm a computer repair tech guy and find this hard to believe if it didn't happen and see it with my own eyes - on the other hand it could be somewhere hidden in the system and recognised like something else so I won't put my hand in fire to verify this )

Thanks!
evronetwork said:
Hello dude,
While it was quite some time when I did this unbrick, it was successful ...expect ALL data to be deleted from phone. Google is your friend and I did get all the files from somewhere
You use a special software from the phone, it's coloros software and with provided files it recognise the phone and flash it(2-3 seperate flashes through the software if I remember correctly) - don't worry as long as the phone turns on(mine was turning on but did nothing ...blank, only way to turn it off was to hold power button and hold it(forced turn off))
P.S. The phone wasn't recognised by the OS ...only from this app(cool? ..weird if you ask me - I'm a computer repair tech guy and find this hard to believe if it didn't happen and see it with my own eyes - on the other hand it could be somewhere hidden in the system and recognised like something else so I won't put my hand in fire to verify this )
Click to expand...
Click to collapse
I figured it out, thanks ! Now I'm stuck with a more minor problem of only having 16gb visible on my 64gb phone. Can't write the userdata_64G image to my phone. Still trying some stuff out and I'll probably just make a new post if I can't get it to work. Thanks again!

broccolicakes said:
I figured it out, thanks ! Now I'm stuck with a more minor problem of only having 16gb visible on my 64gb phone. Can't write the userdata_64G image to my phone. Still trying some stuff out and I'll probably just make a new post if I can't get it to work. Thanks again!
Click to expand...
Click to collapse
I read just the other day that someone needs the 64gb image instead of the 16gb image. You did so well so far, I'm sure you'll figure this one out. Congrats! "Encrochat Beware!"
The mention of the 64gb vs 16gb image is here:
https://forums.oneplus.net/threads/solution-recover-from-hard-bricked-oneplus-one.104943/
He links to the images here:
http://forum.xda-developers.com/oneplus-one/general/guide-return-opo-to-100-stock-t2826541

help
broccolicakes said:
I figured it out, thanks ! Now I'm stuck with a more minor problem of only having 16gb visible on my 64gb phone. Can't write the userdata_64G image to my phone. Still trying some stuff out and I'll probably just make a new post if I can't get it to work. Thanks again!
Click to expand...
Click to collapse
Hi broccolicakes, cane you please tell me how you figured it out. Because Am at your same position with an Oneplus x ??
please tell me how you did it????

redi.c said:
Hi broccolicakes, cane you please tell me how you figured it out. Because Am at your same position with an Oneplus x ??
please tell me how you did it????
Click to expand...
Click to collapse
Hi there, sorry in advance this might not be very helpful in your situation. I ended up using the ColorOS repair tool for Oneplus One that I mentioned earlier in the post. It turned out I just didn't have the correct drivers so once I sorted those out the tool was able to bypass all the software and replace everything on the phone so that I could then install my own OS.
I guess the trick would be to find a version of this tool for OneplusX. I'm not sure if there is one available, I haven't looked. Maybe make a separate post about that? The ColorOS tool I'm talking about is from here: http://forum.xda-developers.com/showpost.php?p=55024864&postcount=136 and it just looks directly for the Qualcomm chip and writes to that. I'm not sure where that tool came from, if it made its way out of Oneplus directly or if someone created it afterwards...

[HELP] Bricked Oneplus 6 - Qualcomm CrashDump - already tried everything

Hi everyone!
Well guys, sorry to bring this subject on thread again (because this forum has a lot of guides to solve this problem).
But I'm without hope with my phone at this moment.
Let me tell you guys my sad story...
I have an Oneplus 6 since december 2018, and never, NEVER, tried to use any modification on my phone.
I am from Brazil (so sorry for my bad english =] ), and here we CANNOT use Oneplus Support services (I've tried but only received the response "sorry I cannot help you on your country"), so because of this, I've decided to never apply any modification to avoid problems.
This week after a simple reboot my OP6 started with "Qualcomm CrashDump" error and my despair begins.
I'm not able to enter on Fastboot Mode. When I try, the systems attempt to boot (the fastboot mode logo appears) and fall down into crash again.
I'm not able to enter on Recovery Mode either. This method shows nothing, only black screen and after some time the crash screen comes again.
I do not have Bootloader unlocked too.
Any suggestion to use TWRP via fastboot.exe or ADB are useless, because I cant make the connection. At least I think that is impossible because the 'adb devices' command does not find the device.
I followed a lot of guides from XDA to solve my problem, including the Mega Unbrick Thread.
I already downloaded at least 8 different versions of msmdownloadtool in consecutive attempts of unbrick my phone. Nothing really helps.
The most weird situation is that msmDownlodTool can finish the proccess with success. The driver installation is working... everything seens OK using the tool but my phone does not revive
Someone have a suggestion for me?
Any suggestion, tool or alternative method is welcome in my actual situation.
Sorry if I posted at wrong local, just tell me and I can fix if necessary.
Thanks in advance to all of you guys.

Did you try msm download tool? If not, nead that thread and good luck

whizeguy said:
Did you try msm download tool? If not, nead that thread and good luck
Click to expand...
Click to collapse
Hi!
Thanks for your reply, but I think you do not read my entire post
As I said, i've already tried at least 8 different versions of msmDownloadTool.
If you have any other suggestion, I'll appreciate.

so you can't boot into fastbootmode anymore?
Had the same problem once before and solved it by flashing the correct twrp by fastboot

EarthquakeXS said:
so you can't boot into fastbootmode anymore?
Had the same problem once before and solved it by flashing the correct twrp by fastboot
Click to expand...
Click to collapse
Yes, I am unable to enter into Fastboot Mode.
When I try, the logo saying "fastboot" appears, but after 4 seconds, the systems stucks on CrashDump error screen again.
That way my PC cannot find my phone with ADB or FASTBOOT commands.
The only tool that works is msmDownloadTool, but even with a success run with that tool, my system does not start and stills under CrashDump error.
I was thinking if exists some version of msmDownloadTool that justs restore the fastboot and unlock bootloader with brute force.
Thats my last hope

hello. heres what u need to do. download miracle kraked version. hold volume+ and - key simultaneously.
go to device manager in pc. look for port expand it and u should see qualcomm Qloader.
now use miracle under qualcomm tab select patch and flash!!

sanaulla jauhar said:
hello. heres what u need to do. download miracle kraked version. hold volume+ and - key simultaneously.
go to device manager in pc. look for port expand it and u should see qualcomm Qloader.
now use miracle under qualcomm tab select patch and flash!!
Click to expand...
Click to collapse
Hi!
Can you please provide some link to this tool?
Thanks for your help!

mikesmarcos said:
Hi everyone!
Well guys, sorry to bring this subject on thread again (because this forum has a lot of guides to solve this problem).
But I'm without hope with my phone at this moment.
Let me tell you guys my sad story...
I have an Oneplus 6 since december 2018, and never, NEVER, tried to use any modification on my phone.
I am from Brazil (so sorry for my bad english =] ), and here we CANNOT use Oneplus Support services (I've tried but only received the response "sorry I cannot help you on your country"), so because of this, I've decided to never apply any modification to avoid problems.
This week after a simple reboot my OP6 started with "Qualcomm CrashDump" error and my despair begins.
I'm not able to enter on Fastboot Mode. When I try, the systems attempt to boot (the fastboot mode logo appears) and fall down into crash again.
I'm not able to enter on Recovery Mode either. This method shows nothing, only black screen and after some time the crash screen comes again.
I do not have Bootloader unlocked too.
Any suggestion to use TWRP via fastboot.exe or ADB are useless, because I cant make the connection. At least I think that is impossible because the 'adb devices' command does not find the device.
I followed a lot of guides from XDA to solve my problem, including the Mega Unbrick Thread.
I already downloaded at least 8 different versions of msmdownloadtool in consecutive attempts of unbrick my phone. Nothing really helps.
The most weird situation is that msmDownlodTool can finish the proccess with success. The driver installation is working... everything seens OK using the tool but my phone does not revive
Someone have a suggestion for me?
Any suggestion, tool or alternative method is welcome in my actual situation.
Sorry if I posted at wrong local, just tell me and I can fix if necessary.
Thanks in advance to all of you guys.
Click to expand...
Click to collapse
Hi there ! I am experiencing a similar issue on the same device. Did you manage to fix it ?

Hi dude are u here ? i will help u

Try this
Rhach1d237 said:
Hi there ! I am experiencing a similar issue on the same device. Did you manage to fix it ?
Click to expand...
Click to collapse
Source is a videotutorial. google oneplus 6 hardbrick and click the video of Max Lee
(it worked for me)
the download takes an awful lot of time
first get your phone into qualcomm download mode by holding down volume up + power button and plug your device in your PC.
(first unzip the hardbrick zip folder) then the oneplus 6 folder and than the .exe file and click 'start' if it detects your phone.
That is flashing every chip and Hydrogen OS 5.whatever.3 but that is not important. Your phone should boot and than you can install Oxygen OS with android 10(thats the other zip folder) using the local upgrade feature.
(make sure to enable google play services after upgrade from hydrogen OS)
Hope it will work for you too if you haven't tried it already.

help !. Bricked OP8 t-mobile unlocked

Hey guys. I need some help. this is my wrong doing !!
I got a network unlocked T mobile which I started using with AT&T. Today I received the unlock code from T mobile to unlock bootloader which I did. then I I installed TWRP and Magisk without any issues. then I tried to fix the persis.img coz fingerpritn is not working. it didnt work so I left it alone. But I dont know why I wiped cache, data and then phone got stuck at boot loop. (no backup). I tried to install using MSM tool but it didnt work. MSM tool was not detecting the phone. then in TWRP I clicked on EDL and now the phone screen is blank. tried every possible combination of keys but no luck. was doing all this on windows 10. any help would be greatly appreciated. thanks

kool_am said:
Hey guys. I need some help. this is my wrong doing !!
I got a network unlocked T mobile which I started using with AT&T. Today I received the unlock code from T mobile to unlock bootloader which I did. then I I installed TWRP and Magisk without any issues. then I tried to fix the persis.img coz fingerpritn is not working. it didnt work so I left it alone. But I dont know why I wiped cache, data and then phone got stuck at boot loop. (no backup). I tried to install using MSM tool but it didnt work. MSM tool was not detecting the phone. then in TWRP I clicked on EDL and now the phone screen is blank. tried every possible combination of keys but no luck. was doing all this on windows 10. any help would be greatly appreciated. thanks
Click to expand...
Click to collapse
So it turns out its not a hard brick. I'm stuck on TWRP. I'm able to get to fastboot. I tried to install Oxygen OS thru fastboot but the PC is not detecting the phone in fastboot. Mac detects it but I believe all the stock Roms are for PC use. I did try it on my MAc and was able to open a terminal window inside the Oxygen OS folder but then the fastboot device command is not found. any help would be greatly appreciated. I installed SDK and ADB drivers on PC but in device manager the device still only shows as Android device with no drivers. !! thanks

kool_am said:
So it turns out its not a hard brick. I'm stuck on TWRP. I'm able to get to fastboot. I tried to install Oxygen OS thru fastboot but the PC is not detecting the phone in fastboot. Mac detects it but I believe all the stock Roms are for PC use. I did try it on my MAc and was able to open a terminal window inside the Oxygen OS folder but then the fastboot device command is not found. any help would be greatly appreciated. I installed SDK and ADB drivers on PC but in device manager the device still only shows as Android device with no drivers. !! thanks
Click to expand...
Click to collapse
Solved !

solved how? i greatly would like to know how to flash from fastboot, i know that isnt what this thread was about but im having the exact same problems you are with msm. i can see the phone in fastboot but i have no idea how to flash or what to flash from there. I can get into recovery but i cant copy anything over to the phone and the drivers dont show up for adb. so i pretty much ONLY have fastboot and dont know what to do! 2 days since the phone been down and im lost AF

JCroffut said:
solved how? i greatly would like to know how to flash from fastboot, i know that isnt what this thread was about but im having the exact same problems you are with msm. i can see the phone in fastboot but i have no idea how to flash or what to flash from there. I can get into recovery but i cant copy anything over to the phone and the drivers dont show up for adb. so i pretty much ONLY have fastboot and dont know what to do! 2 days since the phone been down and im lost AF
Click to expand...
Click to collapse
Can msm detect the phone when connected in fastboot. Also check device manager in pc to make sure it detects the phone as qualcomm device. Otherwise msm will not work.
Download msm. Turn phone off. Connect phone to pc. Open msm. Press start. Press volume down and power button on phone. It should be detected by msm and should start flashing the software.

Standby....
When plugged in the phone in EDL it shows
QUSB_BULK_CID0412 with an exclamation mark inside a yellow triangle
When i plugged in the phone and open fastboot it shows
Android with an exclamation point inside a yellow triangle
I booted up msm, clicked other, clicked start, pressed volume down and volume up and plugged it in. still says waiting for device to connect. ive also tried this with a number of keys being help, ive tried to boot from twrp straight into edl mode, none of which works
which all says to me its a driver issue of some kind, but for 3 days ive been slaving away on xda and cannot for the life of me figure out where to get the drivers.

JCroffut said:
Standby....
When plugged in the phone in EDL it shows
QUSB_BULK_CID0412 with an exclamation mark inside a yellow triangle
When i plugged in the phone and open fastboot it shows
Android with an exclamation point inside a yellow triangle
I booted up msm, clicked other, clicked start, pressed volume down and volume up and plugged it in. still says waiting for device to connect. ive also tried this with a number of keys being help, ive tried to boot from twrp straight into edl mode, none of which works
which all says to me its a driver issue of some kind, but for 3 days ive been slaving away on xda and cannot for the life of me figure out where to get the drivers.
Click to expand...
Click to collapse
It is a driver issue for sure. When connected device manager should detect as qualcomm hd9008.......

kool_am said:
It is a driver issue for sure. When connected device manager should detect as qualcomm hd9008.......
Click to expand...
Click to collapse
i figured that, i am at a complete loss as to where to find the drivers. i actually might need you to hold my hand on this one a tiny bit because im about to smash the phone on the ground and say someone stole it. thats where i am with this phone haha

JCroffut said:
i figured that, i am at a complete loss as to where to find the drivers. i actually might need you to hold my hand on this one a tiny bit because im about to smash the phone on the ground and say someone stole it. thats where i am with this phone haha
Click to expand...
Click to collapse
qualcomm hs-usb qdloader 9008 - this is the exact name of the driver.
Try this link: https://forum.xda-developers.com/t/guide-fixing-hard-bricks-qualcomm-hs-usb-qdloader-9008.3403868/

kool_am said:
qualcomm hs-usb qdloader 9008 - this is the exact name of the driver.
Try this link: https://forum.xda-developers.com/t/guide-fixing-hard-bricks-qualcomm-hs-usb-qdloader-9008.3403868/
Click to expand...
Click to collapse
standby ill read through it now. we also have 2 different threads going so i can combine them if thats easier for you

kool_am said:
qualcomm hs-usb qdloader 9008 - this is the exact name of the driver.
Try this link: https://forum.xda-developers.com/t/guide-fixing-hard-bricks-qualcomm-hs-usb-qdloader-9008.3403868/
Click to expand...
Click to collapse
Only download the qualcomm driver from this link. Or search for it online.
I have spent much more time than you trying to figure this out. I have a pc and Mac both. Mac is not compatible with a lot of the software and my pc usb ports are all bad. Point being, leave it alone for a day or so. Come back at it with a fresh start and fresh mind.

kool_am said:
Only download the qualcomm driver from this link. Or search for it online.
I have spent much more time than you trying to figure this out. I have a pc and Mac both. Mac is not compatible with a lot of the software and my pc usb ports are all bad. Point being, leave it alone for a day or so. Come back at it with a fresh start and fresh mind.
Click to expand...
Click to collapse
i hear that. after 3 days of non stop working at it im pretty sure im just not smarter than the phone today lol. looks like this phone is now stolen and going into a trash can lol

JCroffut said:
i hear that. after 3 days of non stop working at it im pretty sure im just not smarter than the phone today lol. looks like this phone is now stolen and going into a trash can lol
Click to expand...
Click to collapse
If I were you, I wouldn't throw the phone away. Like I said it's a simple issue of driver. Install the correct driver and make sure you see it as qualcomm device in device manager. Trust me, from then on, it's just a matter of a few clicks.
I unbricked my phone to t mobile and then converted to global rom without any issues.

kool_am said:
If I were you, I wouldn't throw the phone away. Like I said it's a simple issue of driver. Install the correct driver and make sure you see it as qualcomm device in device manager. Trust me, from then on, it's just a matter of a few clicks.
I unbricked my phone to t mobile and then converted to global rom without any issues.
Click to expand...
Click to collapse
i sent you a private convo on here if thats ok so i dont spam the forum! You may be able to help me out if i could borrow a few minutes of your time!

JCroffut said:
i hear that. after 3 days of non stop working at it im pretty sure im just not smarter than the phone today lol. looks like this phone is now stolen and going into a trash can lol
Click to expand...
Click to collapse
i was definatly kidding tho this is my only phone and i have to solve this problem lol

I'm not sure if you have read this thread already. I messed up my phone a couple days ago as well and follow the steps there and was able to MSM my phone back to stock.
[OP8][OOS TMO 55CB] Unbrick tool to restore your device to OxygenOS
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been...
forum.xda-developers.com

Solved

.

zeroiron said:
Hey guys!
i'm a bloody noob.
i never did something like unbricking my phone or wiping it or flashing it. It was my first time doing something like this because i just hate stock roms nowadays.
to unlocking the bootloader on my phone was no problem. but the problem was, that i updated my phone to adroid 11 and all the files i found in the past (half year ago) was for android 10, i think.
BUT I DIDN'T KNEW THAT BEFORE! I didn't knew that it would cause problems or that i had to be cautions about that.
Whatever. I tried to follow the instructions on this site: https://wiki.lineageos.org/devices/guacamole/upgrade
the twrp site i used was: https://eu.dl.twrp.me/guacamole/
Is the data "https://eu.dl.twrp.me/guacamole/twrp-3.6.0_11-0-guacamole.img.html" from 2021-11-22 know for adroid 11?
Because half year ago, i think, this all didn't work because there was no twrp for adroid 11 outside.
to be honest i don't know if i tried to install something else too in the past. i don't remember anymore.
I stuck half year ago on this bootloop problem. and i didn't worked again on this phone. i thought i could just wait for a new data for android 11 and try it later again.
Later is today but i made i worse!
I downloaded from this site https://download.lineageos.org/guacamole the file:
lineage-18.1-20220227-recovery-guacamole.img
after the command 'fastboot flash boot xxx.img' i reboot my phone.
Now my phone is displaying :
qualcomm crashdump mode
dm-verity device corrupted force dump
kernel-restart
what can i do now?
If i press the sound buttons + off-button i come the the boot screen which says:
blablabla
internetsite
press power button to pause boot
but this display won't stay long enough. after few seconds it's again on this crashdump mode
edit: i think i wiped in the past the whole os. And now? What should i do?
On this MSM Tool my phone isn't recognized. even with newest driver or other cable.
What should i do know? Is my phone lost now?
If some can help me please write exactly down what i should click / download etc.
If someone can german here and knows help, please help me in german. but don't have to. i'm glad if anyone can help me.
Click to expand...
Click to collapse
From what I can gather from your details I would try to get the MSM tool to work, it sounds like a driver issue, just make sure you uninstall previous driver first then go here
https://www.getdroidtips.com/download-qualcomm-qdloader-hs-usb-driver/
and get latest driver , follow all instructions,, also make sure your PC is installing all the optional drivers in the windows update section while your phone is connected to the PC, hth,, good luck