Help.
I have rooted my milestone xt720 with universalandroot. then try to install Dexter's Froyo without rooting again. All the step were successful. But the it is struck on boot screen after rebooting with following message.
Bootloader
80.89
Err:A5,70,39,00,27
Battery OK
OK to program
Transfer Mode:
USB
Can someone please help as what to do next if anything can be done. Please
If your phone is automatically booting there, that means the signatures don't validate. This is recoverable. You will have to use RSD Lite (Windows) or sbf_flash (Linux/MacOS) to flash the stock sbf.
Related
Currently, my phone is on central europe rom with jit, apps2sd and open recovery 1.46 installed. I had previously used rsdlite 4.5.3 to flash my phone but now it won't detect my phone after i installed jit, apps2sd and open recovery 1.46. Anyone can help? Thanks.
put your device into bootloader mode by pressing vol down + camera key + on button
before that you must install motorola usb driver first
i managed to get it to work..problem was caused by my pc and not the phone..zzz..anyway thanks for the help!
make sure you are in bootloader mode but not in recovery mode
recovery mode: a "!" sign will appear
bootloader: dark backgroud and just some numbers and letters
when you connect your phone to computer, not your phone name but the name of the cpu (OMAP3440)will be identified
Same problem
I am having the same problem as you do. I had a stock Milestone. I fully rooted it through SuperOneClick. I wanted to install CyanogenMod so I had to flash it with the recovery SBF.
I have installed the latest motorola drivers and RSD. I boot it using Up on D-Pad and power, plugs it to computer. The flash drivers shows a successful installation.
I open up RSDLite with administrator rights. Still, it doesn't recognize my phone. I tried it on every way I could imagine. Open RSD first, after; plug first, after.
My battery is fully loaded.
My device is a rooted Milestone running on Android 2.2.1.
Kernel 2.6.32.9
It has superuser installed and has been flashed with ClockworkMod 3.1.0.2 using ROM manager. That was because I wanted to backup my stock ROM aswell. It doesn't work either. After booting it shows the yellow exclamation mark and freezes.
What else could it be? :/
Thanks in advance
Solved.
I figured it out. I wiped out all my data from the phone (back to factory settings option) and it is now flashing fine through RSD Lite.
Pretty simple.
Hey guys. I a having same problems as described above. Namely, I succesfully installed moto , instaled RSD, and have the sbf. The problem is that though my phone is running bootloader, and displays that there is a USB connection, the cpu doesnt show that a phone is connected. Therefore, RSD is blank and doesnt show device (so i cant START the sbf flash. Any suggestions? One note, when I go into Recovery to wipe my data there is the following two lines of text on the bottom of the screen :
"E:Can't open /cache/recovery/command
E: an't open /cahe/recovery/caller"
Those errors in recovery are harmless. Recovery is basically saying that it cannot find a downloaded OTA package to automatically apply.
Unfortunately I don't flash in windows, but based on threads in the past, these seem to be driver or permissions problems (maybe you need to be admin when running RSD, dunno). FWIW I use sbf_flash on Linux
Sent from my Milestone XT720 using xda premium
this is logcat (bootlog)
i try RSDlite over 20times (try 5 version sbf)
but i can't success bootup
i can use open recovery and check everything and look ok...
dateno1 said:
this is logcat (bootlog)
i try RSDlite over 20times (try 5 version sbf)
but i can't success bootup
i can use open recovery and check everything and look ok...
Click to expand...
Click to collapse
Does RSDLite finish 100% successful and then can't boot? Did you try it without sdcard?
I guess that you have tried to install 2.2 on your XT, and you are in boot loop (M logo), but you can enter bootloader mode, and if you do RSD lite shows imei, and other data something like this: "000x000000x00"?
some XT720 have problems with open recovery (possible?) and if you flash OR and put 2.2 on it you will brick your mobile (I managed to do that, and a few other people, and unfortunately only solution is motorola repair center - you can't unbrick it)
for others:
I think that you can test if your mobile is gonna be bricked in a simple way...
root your phone, download "ledmeknow" from market, and if there isn't detected any LEDs then don't flash 2.2 on your phone
EDIT
I see that you can enter open recovery...if you can, then you are safe
just wipe all data from it, flash new sbf and you will be fine
Not replying back so must have resolved it.
dateno1 said:
this is logcat (bootlog)
i try RSDlite over 20times (try 5 version sbf)
but i can't success bootup
i can use open recovery and check everything and look ok...
Click to expand...
Click to collapse
How can you use OpenRecovery after flashing a SBF? The hijacked sh will be missing... after flashing a stock sbf you have to root the phone and install the OpenRecovery hijacks. If you can't boot, how do you do that? So there must be something wrong with your drivers or RSDlite. You could also try sbf_flash on Linux or MacOS if you think RSDlite is messing up.
On my Milestone XT720 always have to use the Motorola Recovery to do a factory reset after flashing the Motoroi XT720 sbfs because it won't boot immediately after flashing. Not sure if that could be a problem for flashing Motoroi on Motoroi, though.
LibertyMonger said:
Not replying back so must have resolved it.
Click to expand...
Click to collapse
It's like 4:15am in Korea... he'll be back
I have a few questions of my own regarding that issue. I have Dexter's ROM installed on my Motorola Milestone XT720.
Everything works fine, even though I've had to reinstall the ROM along the way.
Total noob question:
Can I boot my XT720 into recovery mode if it won't boot up at all? (Motorola logo stays on screen, nothing else happens)
I have a recent boot/system/data backup in my nandroid folder, what's the quickest way to recover it when android won't start up?
Basically I seem to have this problem here:
http://forum.xda-developers.com/showthread.php?t=431277
I have the image but I need an .sbf file for RSDlite ... or does that not make sense?
Look at EDIT #2!
Dear xda-developer,
My Dad got a brandnew Motorola Droid 2 and I should flash him a new Gingerbread Rom(CM7). But I briked his phone( )... so...
How can i get access to the Recovery Clockwork Mod after brik?
I tried to flash the CM7 to the Droid 2 but i forget to wipe it and to clear cache. After i installed the Custom Rom I reboot the phone, but after the Motorola Picture happen nothing. I tried different methods to get access to the Recovery Mod, but it doesen't work (holding the power Button and the X-Button, holding the power button and the volume down button or the arrow up button (but with this i get access to the bootloader))
Can I flash the Recovery with RSD-Lite? Maybe with step-by-step instruction? Pleeaaasee
Thanks a lot,
Johnny
EDIT: I try to flash another Custom Rom via RSD Lite... hope it works
EDIT #2: Battery Energy is low... and I can't recharge it (youtube.com/watch?v=3uVRZzRMkfg) ... don't know why(<-- NEED HELP!)
1. You can only flash SBF via RSDLite. You cannot flash custom ROMs like that.
2. You need to get some other battery, or charge your battery by some other means.
3. You cannot boot into ClockworkMod in this state.
Okay, now I can charge the battery with another Phone... but how can I access to Clockwork Mod?
Is a sbf-file to unroot a phone and make a recovery?
You cannot access ClockworkMod when the phone is bricked.
Flash an SBF, then root and install Droid 2 Recovery Bootstrap.
Ok, i tried this one:
mydroidworld.com/forums/droid-2-discussion/5323-tbh-mydroidworld-present-droid-2-2-3-20-triple-threat.html
but RSD always says that the flashing process failed...
img339.imageshack.us/img339/5782/unbenanntouf.jpg
Can you kindly inform us why are you using a Droid 2 SBF to flash a Droid 2 Global phone?
Ok, I found a sbf for milestone 2... but I realised that there is no Cyanogen Mod for Milestone 2... ony for the Droid 2. Is that right? So can I use this( download.cyanogenmod.com/?type=nightly&device=cdma_droid2) nightly builds wich are made for the Droid 2 on Milestone 2?
Thanks a lot!
AFAIR, the D2 port doesn't know about GSM.
Same problem on my Droid 2
I was attempting to flash a ROM on my Droid 2 via ROM Manager and forgot to wipe the cache & data...now when my Droid 2 reboots, I get a constant loop of the reboot screen with the Cyanogenmod 7 logo. I've tried going to recovery mode, via holding down the X on the keypad, then turning it on. It allowed me to clear my user data & wipe my cache, but when rebooting the system it still continues to reboot in a loop with Cyanogenmod 7, not taking me to the setup screen. I feel like I'm missing a few steps. Can someone help me with what I am doing wrong?
SBF, research (google is your textbook), and once you've researched enough research some more and then try again. Any time you feel like you've hit a brick wall SBF. Never use D2 or Milestone 2 roms with D2G. Same for the inverse. And use only a D2G SBF.
Sent from my DROID2 GLOBAL using XDA Premium App
I have a motorola atrix 2 mb 865. i was on gb 2.3.6 and not knowing what i was doing i updated it to jelly bean using cwm from recovery menu. i got a message saying every thing was successful but when it went to boot it got stuck in a boot loop. i have tried rsd lite fxz fastboot but my computer will not recognize the phone i have uninstalled and reinstalled the correct drivers but still the pc will not recognize. i am able to update with sdcard going into stock recovery on android but every blur_version i have tried either says assert failed or veryfing signature failed. im at a complete loss here please can some one help me. i have looked all over the web but to no avail.
Imabitslow said:
I have a motorola atrix 2 mb 865. i was on gb 2.3.6 and not knowing what i was doing i updated it to jelly bean using cwm from recovery menu. i got a message saying every thing was successful but when it went to boot it got stuck in a boot loop. i have tried rsd lite fxz fastboot but my computer will not recognize the phone i have uninstalled and reinstalled the correct drivers but still the pc will not recognize. i am able to update with sdcard going into stock recovery on android but every blur_version i have tried either says assert failed or veryfing signature failed. im at a complete loss here please can some one help me. i have looked all over the web but to no avail.
Click to expand...
Click to collapse
Just download suitable ICS ROM from the below link and flash your phone using RSD Lite application.
ROM Download link:
http://forum.xda-developers.com/showthread.php?t=1934874
Tutorial:
http://www.youtube.com/watch?v=AHaEHjSzvQQ
buddykartz said:
Just download suitable ICS ROM from the below link and flash your phone using RSD Lite application.
ROM Download link:
http://forum.xda-developers.com/showthread.php?t=1934874
Tutorial:
http://www.youtube.com/watch?v=AHaEHjSzvQQ
Click to expand...
Click to collapse
the thing is that i cant get my pc to recognize my atrix2
Imabitslow said:
the thing is that i cant get my pc to recognize my atrix2
Click to expand...
Click to collapse
Switch the device to Bootloader and see if the computer can see your device. Press the Vol Down + Power Switch simultaneously to switch to Bootloader.
Download the latest drivers
Download the sbf files from the droid developers
Switch off the phone
Download volume key +power button
Then connect to PC
Load sbf file to rsdlite and flash
Say thanks or click thanks :good:
I had this droid razr maxx hd a long time ago. I used to be pretty savvy with rooting and whatnot. At one point i rooted the phone enabled native tether and even unlocked the bootloader. however I never flashed a custom recovery. suddenly one day the phone started boot looping. I simply switched phones. now my new phone is broken and i need to get this boot loop fixed. trying to do a recovery simply ends up with it trying to boot again and loop. sometimes it shows the robot with "no command" under it. so thats not possible.
when i select ap fastboot i get device is unlocked status code 3.
So i should be able to flash something to it and get out of this bootloop right? can someone point me to a noob friendly tutorial to try and fix this?
if any more info is needed let me know
Thanks!
KiraTheSavior said:
I had this droid razr maxx hd a long time ago. I used to be pretty savvy with rooting and whatnot. At one point i rooted the phone enabled native tether and even unlocked the bootloader. however I never flashed a custom recovery. suddenly one day the phone started boot looping. I simply switched phones. now my new phone is broken and i need to get this boot loop fixed. trying to do a recovery simply ends up with it trying to boot again and loop. sometimes it shows the robot with "no command" under it. so thats not possible.
when i select ap fastboot i get device is unlocked status code 3.
So i should be able to flash something to it and get out of this bootloop right? can someone point me to a noob friendly tutorial to try and fix this?
if any more info is needed let me know
Thanks!
Click to expand...
Click to collapse
Did You have TWRP flashed as recovery or you running stock and were you running custom or stock rom.
OGdroidster said:
Did You have TWRP flashed as recovery or you running stock and were you running custom or stock rom.
Click to expand...
Click to collapse
I would say stock because i never flashed a custom recovery or anything. just root and unlock bootloader. and enable native wifi teather. but the restore doesnt work it just gives me the robot with "no command"
KiraTheSavior said:
I would say stock because i never flashed a custom recovery or anything. just root and unlock bootloader. and enable native wifi teather. but the restore doesnt work it just gives me the robot with "no command"
Click to expand...
Click to collapse
Just download the drivers for this device and install them. Then download and install rsd lite and install that. Then download the the stock firmware make sure it is the right one and flash it with rsd lite after that you will have to reroot the device. If you don't know what version of firmware you had just post a pic of your device while in ap fastboot bootloader and I can let you know.
OGdroidster said:
Just download the drivers for this device and install them. Then download and install rsd lite and install that. Then download the the stock firmware make sure it is the right one and flash it with rsd lite after that you will have to reroot the device. If you don't know what version of firmware you had just post a pic of your device while in ap fastboot bootloader and I can let you know.
Click to expand...
Click to collapse
Random question. is there any way to retrieve photos from the internal storage of this device with it stuck in a boot loop?
KiraTheSavior said:
Random question. is there any way to retrieve photos from the internal storage of this device with it stuck in a boot loop?
Click to expand...
Click to collapse
If you had a custom recovery that you could mount while in recovery. Have you tried adb.