Database Info

any roms for 2.3.6?

i just joint this site and have been searching for roms which i can root to. my phone is currently running 2.3.6 DDKT1. if anyone would just give the link of a ROM which will work on my phone i would be thankful.

all ROMs are gonna run fine. Some good, the others better.
just go to the development section and find a ROM that suits you. Follow the Instructions and you'll be fine.
Try using a program such as ROM Manager, and you'll be screwed.

i see that ur currently using RazaDroid v1.0 at 801MHz. how do i also get it? im new to this so how do i root my device to ur ROM? and is 801MHz stable??

hey man
here can you get it (RAZODROID V1)
http://forum.xda-developers.com/showthread.php?t=1430889
and here for root your device
http://forum.xda-developers.com/showthread.php?t=1252699
i have razodroid v1 on my device with 763 Mhz OC
and it runs fastand thats enough for me
cheers

lomash said:
all ROMs are gonna run fine. Some good, the others better.
just go to the development section and find a ROM that suits you. Follow the Instructions and you'll be fine.
Try using a program such as ROM Manager, and you'll be screwed.
Click to expand...
Click to collapse
are you sure, there gonna be no problem installing all those roms on 2.3.6, because they mentioned to flash it over 2.3.4 !

no, no problems at all.

sid_rangra said:
are you sure, there gonna be no problem installing all those roms on 2.3.6, because they mentioned to flash it over 2.3.4 !
Click to expand...
Click to collapse
yea thats my point of creating the thread. i wanted to know which rom i can flash over my 2.3.6 DDKT1. in other roms they mention to flash only over 2.3.4!

Install Clockworkmod Recovery from here
http://forum.xda-developers.com/showpost.php?p=19204364&postcount=1
Get your desired ROM from the android development section
RazoDroid : http://forum.xda-developers.com/showpost.php?p=21084978&postcount=5
Instructions : http://forum.xda-developers.com/showpost.php?p=21085024&postcount=8

I am going to try it today. Will post the results soon.

lomash said:
Install Clockworkmod Recovery from here
http://forum.xda-developers.com/showpost.php?p=19204364&postcount=1
Get your desired ROM from the android development section
RazoDroid : http://forum.xda-developers.com/showpost.php?p=21084978&postcount=5
Instructions : http://forum.xda-developers.com/showpost.php?p=21085024&postcount=8
Click to expand...
Click to collapse
thanks a lot!! ill do this soon. and post the results if any bugs,etc later.

[Q] Need an correct rom

hi there all, i tried a lot of roms but always with some bugs, i want a rom that is total correct, with a good battery life and no bugs in it. I want an answer that tells how to flash it step by step and thanks for everything.

Ditbardh said:
hi there all, i tried a lot of roms but always with some bugs, i want a rom that is total correct, with a good battery life and no bugs in it. I want an answer that tells how to flash it step by step and thanks for everything.
Click to expand...
Click to collapse
lol dude im still on the titanium rom,.. 100% no problems you still havent told me what you had go wrong in our little convo .
Lemme know it could be a simple fix the dev's who made titanium cant answer all

Hi there. Download cleankpurom from dev section.
1. Flash kpe with odin
2. Flash kpu with odin
3. Download cf-root universal (amit bagaria) and flash with odin
4. Go to recovery, insert the rom in the ecternal sdcard and go to the option install zip from sdcard an ther choose the downloaded cleankpurom.
5. When finish reboot
Is a bugfree rom with good battery life. Hope it helps
Sent from my GT-I9003 using XDA

hi its me so,
if you dont like the looks, no problem go to themes section and there you'll find so many looks even ICS looks etc. even your in cleanKPU just flash the theme with CWM recovery then wipe cache.. ) http://forum.xda-developers.com/showthread.php?t=1215935

@luiseteyo: what rom u use? u use this ones as u sad or you're just saying this just to help me, btw thanks all for the answers

hello. after using some betas I stayed at poseidon's kpq rom. really stable

+1 poseiden ROM + UC 9

can u find me the links where to download them and how to install them step by step ?

shailm_85 said:
+1 poseiden ROM + UC 9
Click to expand...
Click to collapse
Same before + ics theme from tarunagg
Sent from my GT-I9003 using XDA

shailm_85 said:
+1 poseiden ROM + UC 9
Click to expand...
Click to collapse
can you tell me how to install them step by step plz

If your in XXKPU root first using this http://forum.xda-developers.com/showthread.php?t=1351056 then copy the poseidon rom in sd card http://forum.xda-developers.com/showthread.php?t=1331842 then go to CWM recovery install zip then choose poseidon rom. after that download the v9 kernel here http://forum.xda-developers.com/showthread.php?t=1357747 then follow how to flash it. Guide is inccluded there.
Hope it helps.

marshygeek said:
If your in XXKPU root first using this http://forum.xda-developers.com/showthread.php?t=1351056 then copy the poseidon rom in sd card http://forum.xda-developers.com/showthread.php?t=1331842 then go to CWM recovery install zip then choose poseidon rom. after that download the v9 kernel here http://forum.xda-developers.com/showthread.php?t=1357747 then follow how to flash it. Guide is inccluded there.
Hope it helps.
Click to expand...
Click to collapse
Isn't kpq as a base before proceed to Poseidon rom? I already flash Poseidon rom with kpu but when u dial *#1234#, the baseband is unknown
Sent from my GT-I9003 using XDA

Yes its based on XXKPQ but i tired it with KPU before coz i read that its better w/ KPU.
EDIT- but if you encountered some bugs repeat the method til XXKPQ then flash poseidon.

why people dont use gingerbread standard rom but try this roms with bugs when the standard rom have no bugs ?

Ditbardh said:
why people dont use gingerbread standard rom but try this roms with bugs when the standard rom have no bugs ?
Click to expand...
Click to collapse
I don't think that Poseidon rom has bug
Sent from my GT-I9003 using XDA

Ditbardh said:
why people dont use gingerbread standard rom but try this roms with bugs when the standard rom have no bugs ?
Click to expand...
Click to collapse
Because standard rom is clubbed with lots of applications which are useless and not only take your space but ram too.....most of the custom roms are stripped version and available only after rooting...which will help you to get 'administrative' rights as in case of windows PC.
so you can even decide initial start up !!!!

the design of the stock rom makes me flash it again..

Ditbardh said:
why people dont use gingerbread standard rom but try this roms with bugs when the standard rom have no bugs ?
Click to expand...
Click to collapse
I do it just for a change and to try out different features and looks, that custom ROMs provide. JMHO

Flashing baseband through recovery

Am so so sorry to ask this question and i dont know if its proper to ask the question,is it possible to flash a baseBAND/radid through recovery.thanks in advance

New BasebandFix by adfad666
It is only temporary and you will have to flash it each time you flash a new baseband rom.
If you revert to a old baseband rom, no fix needed.

Thanks you really helped.hope it works for CM9 AND 10 and not only on CM7

Aragon4realz said:
hope it works for CM9 AND 10 and not only on CM7
Click to expand...
Click to collapse
i think it works in cm9 and should work on cm10 too.:good:

on cm10 and it didn't work for me.

yukice said:
on cm10 and it didn't work for me.
Click to expand...
Click to collapse
Try this..
DOWNLOAD

[HOWTO] Flashing baseband (radio) via LGMDP.exe
Flashing half-broken "fixes" is not any solution.

want to make cwm flashable basebands
id like to make cwm flashable bbs for lg using .fls files.
if any one know it please show me a guide. or a link.
thanks

[Q] Help required installing CM9/10 on my Samsung Galaxy S 4G

Hi,
I was trying to install the CM9/10 for my device and I found a link on how to install here: http://forum.xda-developers.com/wiki/Samsung_Galaxy_S/SGH-T959V/Installing_CyanogenMod_9
I am following the steps, but i am stuck at a place where i have to install CWM 5.0.2.x or higher. I checked their website http://www.clockworkmod.com/rommanager and found version 3.2.0.0. Could you guys please let me know where to find 5.0.2.8?? or suggest an alternative. I am sorry if there was a post similar to this, as i have done extensive search before posting this thread. Thanks in advance, waiting for a reply.

As stated on the wiki page you linked to, you need a kernel with CWM Recovery preinstalled (don't use ROM Manager!)
This page shows you how to flash a kernel onto the device to give you the proper recovery.
Keep reading the wiki, there's lots of good stuff in there to teach you how this device works as far as flashing goes

Thank you!! I was able to install the Kernel and the CM9 ROM....

adithveeresh said:
Thank you!! I was able to install the Kernel and the CM9 ROM....
Click to expand...
Click to collapse
No JB/CM10 yet. Soon as we fix the aries stuff, we'll be on our way!

adithveeresh said:
Thank you!! I was able to install the Kernel and the CM9 ROM....
Click to expand...
Click to collapse
could u tell me where you found the ClockwordMod Recovery (CWM) 5.0.2.x or greater?

crazykidguy said:
could u tell me where you found the ClockwordMod Recovery (CWM) 5.0.2.x or greater?
Click to expand...
Click to collapse
He flashed a kernel that already has it pre-installed. As was suggested in the above post.
Sent from my SGH-T959V using xda premium

Kernel name?
Which kernel did you flash?
SGS4G
Mod version: Octaine Team Acid
Firmware version: 2.3.5
Kernel version: 2.6.35.7-T959vuvki3-cl611444
adithveeresh said:
Thank you!! I was able to install the Kernel and the CM9 ROM....
Click to expand...
Click to collapse

jwgoku said:
Which kernel did you flash?
SGS4G
Mod version: Octaine Team Acid
Firmware version: 2.3.5
Kernel version: 2.6.35.7-T959vuvki3-cl611444
Click to expand...
Click to collapse
Look for bhundven's Blast Off kernel or AntonX's Basic with a Twist in the Development section to then flash CM9 from.

[Q] General questions before I start flashing ROMs

Just got a GT-P3110 and I am extremely unhappy with the stock ROM. I'm trying to decide which JB ROM to install and any thoughts would be appreciated.
But I also have been reading around many threads and I have some questions.
I have seen somewhere that CMR version 6.x.x.x is supposed to be for JB ROMs only, is that true? Does this mean it won't work with ICS ROMs?
Will I have to reflash CMR version 5.x.x.x before the backup of the stock ROM, I made in CMR version 5.5.0.4, can be restored?
Can I load a JB ROM with CMR version 5.x.x.x and then use Odin to install the one step CMR/root/busybox tar.md5 file? Or will I not even be able to flash a JB ROM without CMR version 6.x.x.x?
Why am I having such a hard time finding Odin-flashable versions of CMR version 6.x.x.x?

gandalf_grey91 said:
Just got a GT-P3110 and I am extremely unhappy with the stock ROM. I'm trying to decide which JB ROM to install and any thoughts would be appreciated.
But I also have been reading around many threads and I have some questions.
I have seen somewhere that CMR version 6.x.x.x is supposed to be for JB ROMs only, is that true? Does this mean it won't work with ICS ROMs?
Will I have to reflash CMR version 5.x.x.x before the backup of the stock ROM, I made in CMR version 5.5.0.4, can be restored?
Can I load a JB ROM with CMR version 5.x.x.x and then use Odin to install the one step CMR/root/busybox tar.md5 file? Or will I not even be able to flash a JB ROM without CMR version 6.x.x.x?
Why am I having such a hard time finding Odin-flashable versions of CMR version 6.x.x.x?
Click to expand...
Click to collapse
Ohh quite confused.....
But still.....
Why do u lag in cwr.... 5.XXX when official 6xxxx out....???
I don't know u may HV valid answer for this...
OK next...
if u don't like stock ICS...its for dam sure u won't like official jb also....
Same with me coz no tablet ui coz Samsung is not worried about existing customers.... only they want new customers.....
So off u really want jb then go for pa else aokp ROM....these ROMs HV fire still with race ....
New creation of cwr is 6.0.1.1....via ROM manager if u r rooted we'll...
All the best for or jb ride
Sent from my GT-P3100 using xda premium