Database Info

[Q] battery status not changing?

ok i think i may have read something on this a while ago but i went thru pages of search and cant find the thread so if u know what im talking about please link if not ill start a new thread lol.
so im runing a stock unlocked sensation, has been runing fine, untill this morning and my battery % is not moving? i had a battery app, i un installed it, reboot, battery pull, still not moving.... what the hell is going on?

I am having the same problem as well. If I charge my phone overnight, it will stay at the same percent that it was before I charged it. But, once I reboot the phone, it goes to 100%. It's pretty weird. Is there a fix for this?

Tried wiping your battery stats in recovery?

JustinRawr said:
Tried wiping your battery stats in recovery?
Click to expand...
Click to collapse
im running stock....dont think i can do that

dr mcknight said:
im running stock....dont think i can do that
Click to expand...
Click to collapse
Well there's your problem your running stock! jk .. Maybe a factory reset?

JustinRawr said:
Well there's your problem your running stock! jk .. Maybe a factory reset?
Click to expand...
Click to collapse
Yes, he should definitely root and use a custom rom. He'll get the most out of his phone that way. ​

[Q] battery draining please help..

Hi..
I have flashed creeds rom v3.0 on my galaxy fit and it is working super fine but draining my battery... please tell me what to do..

how much batt. backup you got before, and hw much you are getting now??

when im in my stock rom.. i got the bak up for 1 to 2 days even if i use the phone( i barely use my phone only for textiing) but after flashing the creeds rom my battery is going down even if i just opening the menu and browsing it..
for example: when im in my stock rom the battery(100%) stays up to 6 to 7hrs max even if i use it but now it longs for two hours if i use it..
PLEASE TELL ME HOW TO INCREASE MY BATTERY LIFE..

battery life will be affected...
getting 1-2 days on stock is an exceptional case...I never reached a day on a single charge...
and neways, battery is the cost you have to pay to enjoy all the awesome stuff of custom roms...if you want battery, you'll have to sacrifice features...and vice-versa...
if you still want, try these:
decrease brightness to lowest level you are comfortable with...
switch off wifi, bluetooth, gps, 3g whenever not in use for long...
don't use live wallpapers and actively updating widgets, or too many passive widgets...
hope this helps...but you won't be able to get that much batt again...

Did u wipe battery stats after flashing rom??
Sent from my GT-S5670

Is it Necessary..
MajinSaiyan4 said:
Did u wipe battery stats after flashing rom??
Sent from my GT-S5670
Click to expand...
Click to collapse
No i dint wiped the battery status.. is it necessary to do that??
i have wiped data reset, dalvik cache and wipe cache..

tejkumarvusirikala said:
No i dint wiped the battery status.. is it necessary to do that??
i have wiped data reset, dalvik cache and wipe cache..
Click to expand...
Click to collapse
Yes....
Wipe it.
After wiping Battery Stats check your battery life.
If it still sucks then check if its some app thats draining out the battery....

rekill can u help me on this plz
please tell me how to overclock my phone im using creeds rom v3.0. when i set the frequency in no frills cpu control at 819 mhZ its asking me for rebooting the phone and even after rebooting its coming again to stock frequency please help..
[email protected] said:
Yes....
Wipe it.
After wiping Battery Stats check your battery life.
If it still sucks then check if its some app thats draining out the battery....
Click to expand...
Click to collapse

819 is too much dude!!!
go easy, no wonder you get battery drain...
not all phones can handle above 750mhz...so stick to something stable...
and no-frills doesn't tell to reboot, so can you give screenshot?? (press home+power button)

thanks mate
a.cid said:
819 is too much dude!!!
go easy, no wonder you get battery drain...
not all phones can handle above 750mhz...so stick to something stable...
and no-frills doesn't tell to reboot, so can you give screenshot?? (press home+power button)
Click to expand...
Click to collapse
Thank you acid.. as you said 787 is working for me.. if i set it above 787 its just hanging my phone and restarting itself leaving the frequency unchanged.. im worried if i got any problems at 787 so went back to 600... thank you..

tejkumarvusirikala said:
Hi..
I have flashed creeds rom v3.0 on my galaxy fit and it is working super fine but draining my battery... please tell me what to do..
Click to expand...
Click to collapse
I don't know for creeds rom v3.0, but I installed Battery Calibration and I do it according to the instructions. Charge the battery until the end (100%). Open Battery Calibration and follow the instructions. Someone has already suggested what turned off. You do and it.

Post the issues found in the Android 4.0.4 (ICS)....

Its real nice to have ICS finally for Galaxy R, But we have found some issues.
List of Issues:
1. MMC_CAP_ERASE is enabled by default (eMMC brick bug).
2. Only Tegra optimized Games are working fine, Other Games are lagging a lot (eg: Temple Run).
3. Pinch to zoom in gallery is lagging.

Hold and drag simply doesn't work. First I thought it was a bug in the TW-launcher, but tried with Apex and the same issue is present. I'm trying to solve this with my kernel.

Adam77Root said:
Hold and drag simply doesn't work. First I thought it was a bug in the TW-launcher, but tried with Apex and the same issue is present. I'm trying to solve this with my kernel.
Click to expand...
Click to collapse
Isn't that related to android framework only? How can it be related to the kernel?

Adam77Root said:
Hold and drag simply doesn't work. First I thought it was a bug in the TW-launcher, but tried with Apex and the same issue is present. I'm trying to solve this with my kernel.
Click to expand...
Click to collapse
Wow great news buddy, so you have started working on custom kernel :good:....
All the best man....

i have no issues till now
everything going smooth
battery even holding more longer much more

mj.vikram said:
2. ICS RAM hungry, so battery drain is bit fast compared to GB.....
Click to expand...
Click to collapse
Yes its RAM usage causes bit more battery drain. But jus wan to iterate the importance of Factory reset for ICS update. Without a Factory reset, the upgrade may FC of some of apps. Apart it wil cause a lot of battery drain too. So always do a factory reset before this upgrade from GB to ICS (It will clear the older battery stats file). Also, at the initial stages, there will be some battery issues as the system will be building the battery stats file. With few days, the battery will be back to normal.

When pushing the screen 2 seconds in xda app (just to reply or say thanks) the screen gets black and unresponsive.
And my baseband is I9103NELA1,is it ok?

mj.vikram said:
Its real nice finally to ICS on my phone, But i have found some issues.
So we will use this thread to discuss the Issues related to ICS, i will update the OP ....
1. When mobile is charging Time and Battery % are not updating on the Lock screen.
2. ICS RAM hungry, so battery drain is bit fast compared to GB.....
Click to expand...
Click to collapse
Hey Vikram,
On my device the Time & Battery is changing fine & still by the time not much battery had drain mine currently rooted with RootRecovery_v4.

mj.vikram said:
Wow great news buddy, so you have started working on custom kernel :good:....
All the best man....
Click to expand...
Click to collapse
I tried with my kernel that I created approx. a week ago for JB. It doesn't work (as I expected) because of the framebuffer changes. This is just a beta build and Sam releases src's after official release so we've to wait.

Indha Lezzio said:
When pushing the screen 2 seconds in xda app (just to reply or say thanks) the screen gets black and unresponsive.
And my baseband is I9103NELA1,is it ok?
Click to expand...
Click to collapse
NELA1 is the baseband that came with austrian XWLA4. According to Machram's post it should be XXLQ3. That's because you just restored a nandroid backup and not did a regular installation process which is required to change modem (basedand/radio). (you can flash the modem via cwm or Odin separately) Restoring backups doesn't affect modem, bootloader (this can be crucial sometimes) .. not sure about sales code.

I'm happy to share that I encountered the first SOD. That could be because of too much of install uninstallation while charging. Yes, it is eating RAM but battery backup is good as gb.
Sent from my GT-I9103

vrajan said:
I'm happy to share that I encountered the first SOD. That could be because of too much of install uninstallation while charging. Yes, it is eating RAM but battery backup is good as gb.
Sent from my GT-I9103
Click to expand...
Click to collapse
man from morning i had thrice but its because of high usage i think , i am trying all the apps and thing which i am seeing on XDA.....

Okay, so I noticed that if you enable the motion feature (Samsung's one), then drag&drop works. It's very smooth with TW UX!!! (Will post a CWM-flashable zip in some moments)

Adam77Root said:
Okay, so I noticed that if you enable the motion feature (Samsung's one), then drag&drop works. It's very smooth with TW UX!!! (Will post a CWM-flashable zip in some moments)
Click to expand...
Click to collapse
waiting for your release....

m.kochan10 said:
NELA1 is the baseband that came with austrian XWLA4. According to Machram's post it should be XXLQ3. That's because you just restored a nandroid backup and not did a regular installation process which is required to change modem (basedand/radio). (you can flash the modem via cwm or Odin separately) Restoring backups doesn't affect modem, bootloader (this can be crucial sometimes) .. not sure about sales code.
Click to expand...
Click to collapse
How to restore baseband only buddy..
Sent from my GT-I9103 using xda premium

Sorry for reposting it here again but I really need to know ... I leave for a weekend trip tonight and want to be carrying a stable build. These are the issues I am facing.
1. Lockscreen doesn't work at all.
2. The music kept pausing frequency on my way to office (AUX cable). Will try earphones soon.
3. A 2 sec press on power just restarts the phone and doesn't give the option to set the phone on vibrate (maybe a feature)
4. I am still getting the wrong baseband in About phone ( did anyone flash modem.bin. where is it?)
Maybe I was half asleep when I flashed it. Will flash it again once I reach home. But i did wipe dat and cache

Is hardware accelerated video decoding working confirmed in ics ..?
Anyone tested ..?
How to confirm ..?
In mx player i am not able to play 1080p video..
It is saying hw not possible..
Sent from my GT-I9103 using xda premium

parajsinghal said:
Sorry for reposting it here again but I really need to know ... I leave for a weekend trip tonight and want to be carrying a stable build. These are the issues I am facing.
1. Lockscreen doesn't work at all.
2. The music kept pausing frequency on my way to office (AUX cable). Will try earphones soon.
3. A 2 sec press on power just restarts the phone and doesn't give the option to set the phone on vibrate (maybe a feature)
4. I am still getting the wrong baseband in About phone ( did anyone flash modem.bin. where is it?)
Maybe I was half asleep when I flashed it. Will flash it again once I reach home. But i did wipe dat and cache
Click to expand...
Click to collapse
Hey Buddy you can try with factory reset option before restore the ICS ....

1. ScreenShot for me is not working with Power+Home Combination. Although @Mj.Vikram Confirmed its working fro him.
2. I cannot Mount Phone as USB Storage with/without USB Debugging On. Only MTP mode is connected every time

maheepmaurya said:
1. ScreenShot for me is not working with Power+Home Combination. Although @Mj.Vikram Confirmed its working fro him.
2. I cannot Mount Phone as USB Storage with/without USB Debugging On. Only MTP mode is connected every time
Click to expand...
Click to collapse
Navigate to 'Settings -> Wireless and Networks -> USB utilities' to use it as a USB storage.

Strange problems with Galaxy r

Ok so it is like this:
I bought my galaxy r here in sweden 1 year and 3 months ago, it was working perfectly for around 1 year.
At the one year mark i started to have some problems with the touchscreen where the phone would feel a pressure in the middle of the screen, to get rid of this i simply locked and unlocked the phone or rubbed a bit with a cloth on the screen.
Recently when I saw there was a cm10.1 rom with nightlies I rooted my phone and later installed the cm10.1 rom. Now the most anoying thing. I have a problem with my battery where the phone just shuts down randomly (mostly when playing games) even though it sometimes have up too 80% battery remaining. Then when I restart the phone it usually have 0% battery left and therefore shuts itself down again, sometimes it restarts with just a 20-30% batteryloss. This have occured more often recently and it shuts itself of 3-4 times a day. I can't remember if it was like this when i was on stock, before I started to flash and root, but i think it was.
A few days ago i flashed stock ics from odin and I confirmed that both of these problems still were there, so i have hard to belive that it is the modding of the software that have caused this.
Do you guys have any suggestions to how i can be able to use my phone normally again?
Im just a poor student so i don't want to waste money on a new phone after just 1 year :/

wipe data and cache..i think after flashing u restore ur data back.
Sent from my GT-I9103 using Tapatalk 4 Beta

Will this help with the battery?

kataria.vikesh said:
wipe data and cache..i think after flashing u restore ur data back.
Sent from my GT-I9103 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Will this help the crashing/battery?

DippN said:
Will this help the crashing/battery?
Click to expand...
Click to collapse
It may be help you but first tell me, are you restoring data from titanium backup or something related to that..??
Also if you want to take backup then take it using Super backup application.

kataria.vikesh said:
It may be help you but first tell me, are you restoring data from titanium backup or something related to that..??
Also if you want to take backup then take it using Super backup application.
Click to expand...
Click to collapse
Nope, im not takeing backup of anything.
And one other thing i forgot to mention earlier, the phone now also thinks it is charging itself evrn when it is not. It think the usb cable is still connected.

I hope OP doesn't mind that I'm joining his thread, I'm experiencing the same problems on my gfs phone and don't know what to do.
I just installed the fresh CM 10.1 nightlies (did Cache/Data/Dalvik Wipe) and she is experiencing pretty much the same problems:
After 1 or 2 hours of unplugging the phone gets stuck and shuts down. After restarting the battery percentage is pretty low and the phone shuts down again (even if the battery says ~10%). The battery percentage then changes every restart, but is always between 0 and 20%. The phone is barely usable in this state :/
I couldn't wipe the SD card (.android_secure) because the swapped paths, could this be related?
Thank you in advance!

paKS7 said:
I hope OP doesn't mind that I'm joining his thread, I'm experiencing the same problems on my gfs phone and don't know what to do.
I just installed the fresh CM 10.1 nightlies (did Cache/Data/Dalvik Wipe) and she is experiencing pretty much the same problems:
After 1 or 2 hours of unplugging the phone gets stuck and shuts down. After restarting the battery percentage is pretty low and the phone shuts down again (even if the battery says ~10%). The battery percentage then changes every restart, but is always between 0 and 20%. The phone is barely usable in this state :/
I couldn't wipe the SD card (.android_secure) because the swapped paths, could this be related?
Thank you in advance!
Click to expand...
Click to collapse
Im just glad im not alone with this problem, and as you said, its barely unusable without having it plugged in.

DippN said:
Im just glad im not alone with this problem, and as you said, its barely unusable without having it plugged in.
Click to expand...
Click to collapse
paKS7 said:
I hope OP doesn't mind that I'm joining his thread, I'm experiencing the same problems on my gfs phone and don't know what to do.
I just installed the fresh CM 10.1 nightlies (did Cache/Data/Dalvik Wipe) and she is experiencing pretty much the same problems:
After 1 or 2 hours of unplugging the phone gets stuck and shuts down. After restarting the battery percentage is pretty low and the phone shuts down again (even if the battery says ~10%). The battery percentage then changes every restart, but is always between 0 and 20%. The phone is barely usable in this state :/
I couldn't wipe the SD card (.android_secure) because the swapped paths, could this be related?
Thank you in advance!
Click to expand...
Click to collapse
Both of you install CM10.1 using Procedure no 2 from OP.

kataria.vikesh said:
Both of you install CM10.1 using Procedure no 2 from OP.
Click to expand...
Click to collapse
Will try that when i get home, thx.

kataria.vikesh said:
Both of you install CM10.1 using Procedure no 2 from OP.
Click to expand...
Click to collapse
Thank you, vikesh! I'll be able to try Procedure II tomorrow afternoon.

paKS7 said:
Thank you, vikesh! I'll be able to try Procedure II tomorrow afternoon.
Click to expand...
Click to collapse
Sadly, I can confirm that this did not change anything.
The problems are still there :/

DippN said:
Sadly, I can confirm that this did not change anything.
The problems are still there :/
Click to expand...
Click to collapse
It shouldn't be happened. But if u are feeling so, just flash any stock GB using odin v1.87. Then just wipe all data and cache. Install cm10.1 over that using method 2.
Sent from my GT-I9103 using xda premium

kataria.vikesh said:
It shouldn't be happened. But if u are feeling so, just flash any stock GB using odin v1.87. Then just wipe all data and cache. Install cm10.1 over that using method 2.
Sent from my GT-I9103 using xda premium
Click to expand...
Click to collapse
I'm definitely going to try this, but as it seems now i think it is more about a faulty battery/hardware that software?
Or have these kind of problems been fixed software before?
One other thing, if i have rooted my device, does the root dissappear when i flash stockrom using odin?

DippN said:
I'm definitely going to try this, but as it seems now i think it is more about a faulty battery/hardware that software?
Or have these kind of problems been fixed software before?
One other thing, if i have rooted my device, does the root dissappear when i flash stockrom using odin?
Click to expand...
Click to collapse
May be hardware or software too..when you will vanish all data & cache then Software issue may be gone but if problem still persist, means you have hardware problem.
Also, root will be lost after flashing Stock ROM from ODIN.

I'm able to also confirm, that Procedure II didn't help the problem. I really doubt it is a hardware fault, because of us two having the exact same problem after flashing the same rom.
@Dippn: Do you know which nightly build you used? In my case it was the nightly build "20130405". Also could you check which baseband you are on? (Under About Phone -> Baseband Version) Over here we have i9103NEKI1
The only special thing we did I can think of is flashing a modem file (when we were still on the unofficial cm10.1 without these kind of problems, but massive battery drain), because there was a call problem going on for customers of the austrian provider 3 and CM10.1.
I could analyse the problem a bit more today: It seems as soon as the phone gets busy (for example from the browser loading pages or in DippN's case processing a game), the touch screen gets unresponsive and everything starts to lag and delay or freezes completely until it shuts down the phone. Could be either CPU or RAM related, I guess. I just wonder what caused this, even if the nightly had a faulty kernel, this should be fixed as soon as we flash another ROM, right?
I will be able to try a different ROM on monday. It would be great, if you could report, if the downgrade to GB helped the issue. I'd like to try a different baseband, if you are on the same right now too.
Greetings and thank you so much for trying to help us, vikesh!

paKS7 said:
I'm able to also confirm, that Procedure II didn't help the problem. I really doubt it is a hardware fault, because of us two having the exact same problem after flashing the same rom.
@Dippn: Do you know which nightly build you used? In my case it was the nightly build "20130405". Also could you check which baseband you are on? (Under About Phone -> Baseband Version) Over here we have i9103NEKI1
The only special thing we did I can think of is flashing a modem file (when we were still on the unofficial cm10.1 without these kind of problems, but massive battery drain), because there was a call problem going on for customers of the austrian provider 3 and CM10.1.
I could analyse the problem a bit more today: It seems as soon as the phone gets busy (for example from the browser loading pages or in DippN's case processing a game), the touch screen gets unresponsive and everything starts to lag and delay or freezes completely until it shuts down the phone. Could be either CPU or RAM related, I guess. I just wonder what caused this, even if the nightly had a faulty kernel, this should be fixed as soon as we flash another ROM, right?
I will be able to try a different ROM on monday. It would be great, if you could report, if the downgrade to GB helped the issue. I'd like to try a different baseband, if you are on the same right now too.
Greetings and thank you so much for trying to help us, vikesh!
Click to expand...
Click to collapse
Well, we are not on the same baseband. I'm on I9103XXLQ3.
About the cm verison im not quiet sure, the latest i flashed was "20130406" but since the problem were there the time before that when i flashed cm I cant answer exacly but i have a cm version "20130305" on my desktop and it could be that one that I used.
I never used cm before it was on nightlies so the modem file flashing i dont know anything about.
The thing you mention about that it shuts of when the phone gets busy and touchscreen gets unresponsive I can kind of confirm too.
I will flash GB now, will report back in an hour how it went.

kataria.vikesh said:
It shouldn't be happened. But if u are feeling so, just flash any stock GB using odin v1.87. Then just wipe all data and cache. Install cm10.1 over that using method 2.
Sent from my GT-I9103 using xda premium
Click to expand...
Click to collapse
Are you sure i should do it using v1.87?
I'm having problems finding it and v1.85 seems to be in everyones links.

DippN said:
Are you sure i should do it using v1.87?
I'm having problems finding it and v1.85 seems to be in everyones links.
Click to expand...
Click to collapse
Flashed GB using v1.85 and now I am stuck in bootloop, after 10 sec at the samsung logo it restarts and repeat. >.>
When the phone restarted after the flash and after it says "-updating application" it says:
Installing Multi-CSC
Can't access to '/system/csc/NEE/system/'.
Successfully applied multi-CSC.
I have no idea what this means but could it mean anything?
EDIT: I got it to start by wipe cache and data. (thought i should do that when cwm was installed)
Unfortunately already in the startup options when u write wifi password the touchscreen became very unresponsive and when i after a few min had succeded writing the password the phone shut of when it tried to connect to it! :,(
I can also confirm that it still thinks it is charing when it is not becuase the symbol in the statusbar flicked from battery to charging symbol.
Is there anything else softwarerelated that I can do?

DippN said:
Flashed GB using v1.85 and now I am stuck in bootloop, after 10 sec at the samsung logo it restarts and repeat. >.>
When the phone restarted after the flash and after it says "-updating application" it says:
Installing Multi-CSC
Can't access to '/system/csc/NEE/system/'.
Successfully applied multi-CSC.
I have no idea what this means but could it mean anything?
EDIT: I got it to start by wipe cache and data. (thought i should do that when cwm was installed)
Unfortunately already in the startup options when u write wifi password the touchscreen became very unresponsive and when i after a few min had succeded writing the password the phone shut of when it tried to connect to it! :,(
I can also confirm that it still thinks it is charing when it is not becuase the symbol in the statusbar flicked from battery to charging symbol.
Is there anything else softwarerelated that I can do?
Click to expand...
Click to collapse
Wipe data again.. If possible after wiping data Just reflash the GB.

[J7 Prime][G610F D/S] Battery Problem

Since I Install AOSP (Resurrection Remix ROM for J7 Prime),
My Phone Battery Stopped Charging Over 77%
The Battery Will drain slowly while charging after 77% (Phone Is In Use)
Tried
- Factory Reset
- Reflash Original Firmware
- Wipe Cache and Dalvik
- Long Charge from Night to Morning (Still 77% - 75%)
None of the one above is working
Is the Battery Problem?
or
The Phone Problem?
( Sorry for my bad English )

Cruxter321 said:
Since I Install AOSP (Resurrection Remix ROM for J7 Prime),
My Phone Battery Stopped Charging Over 77%
The Battery Will drain slowly while charging after 77% (Phone Is In Use)
Tried
- Factory Reset
- Reflash Original Firmware
- Wipe Cache and Dalvik
- Long Charge from Night to Morning (Still 77% - 75%)
None of the one above is working
Is the Battery Problem?
or
The Phone Problem?
( Sorry for my bad English )
Click to expand...
Click to collapse
Have you tried resetting your battery stats?

Jbgamer04 said:
Have you tried resetting your battery stats?
Click to expand...
Click to collapse
Using?

Cruxter321 said:
Using?
Click to expand...
Click to collapse
If you are on stock touchwiz you should be able to use the built in settings here is the process first turn on airplane mode and turn of wifi bluetooth etc. All the connections,,,,, after that just type *#0228# on your dialer and click on quick start then connect your charger and turn off your phone after that let your phone fully charge before you turn it on,then voila your battery is fixed.
Note: please dont do this procedure so recklessly search on the web for the whole guide,,i would recommend youtube just search for the keyword: secret code for samsung device to hack bettery life,, something like tha. Again dont do this to your phone right away cause it might damage your battery instead of fixing it, and if you found the whole guide on the net follow the instructions strictly

Jbgamer04 said:
If you are on stock touchwiz you should be able to use the built in settings here is the process first turn on airplane mode and turn of wifi bluetooth etc. All the connections,,,,, after that just type *#0228# on your dialer and click on quick start then connect your charger and turn off your phone after that let your phone fully charge before you turn it on,then voila your battery is fixed.
Note: please dont do this procedure so recklessly search on the web for the whole guide,,i would recommend youtube just search for the keyword: secret code for samsung device to hack bettery life,, something like tha. Again dont do this to your phone right away cause it might damage your battery instead of fixing it, and if you found the whole guide on the net follow the instructions strictly
Click to expand...
Click to collapse
Thanks for the Information, let me try it in few days
Anyway , any other alternative way?

Cruxter321 said:
Thanks for the Information, let me try it in few days
Anyway , any other alternative way?
Click to expand...
Click to collapse
Well i dont know any app but i use this one kernel mod named KITANA and it has a battery status reset and battery calibration but the mod needs root and busybox in order to use it but even though i have the mod i still prefer the stock battery setting on samsung
---------- Post added at 02:35 PM ---------- Previous post was at 02:33 PM ----------
Cruxter321 said:
Thanks for the Information, let me try it in few days
Anyway , any other alternative way?
Click to expand...
Click to collapse
And if you are using aosp based rom like resurrection remix they have a built in battery stats reset and calibration on the settings

Jbgamer04 said:
Well i dont know any app but i use this one kernel mod named KITANA and it has a battery status reset and battery calibration but the mod needs root and busybox in order to use it but even though i have the mod i still prefer the stock battery setting on samsung
---------- Post added at 02:35 PM ---------- Previous post was at 02:33 PM ----------
And if you are using aosp based rom like resurrection remix they have a built in battery stats reset and calibration on the settings
Click to expand...
Click to collapse
I have done it, but the battery still won't charge till 100% (Same Problem stuck at 77%/70%). Any ideas?

Cruxter321 said:
I have done it, but the battery still won't charge till 100% (Same Problem stuck at 77%/70%). Any ideas?
Click to expand...
Click to collapse
I thinks the problem is with your battery,i also have that issue but in my case when it reached 90% it is super slow on charging. Try changing the battery if the problem still persist i think it is with your phone. And you should avoid using your phone while charging cause it will damage your phone in a long run
---------- Post added at 02:17 PM ---------- Previous post was at 02:14 PM ----------
Jbgamer04 said:
I thinks the problem is with your battery,i also have that issue but in my case when it reached 90% it is super slow on charging. Try changing the battery if the problem still persist i think it is with your phone. And you should avoid using your phone while charging cause it will damage your phone in a long run
Click to expand...
Click to collapse
Try letting your phone discharge until it shuts down and remove your battery for 10 mins, aftet that put it back on your phone and charge until it reaches 100% then boot your phone

Same problem help please

xcosby said:
Same problem help please
Click to expand...
Click to collapse
ME Too
Any Solution ???