Related
This will allow you to use adb and fastboot as if they were any other DOS command by typing them in a Command Prompt window from any directory.
Thanks to MERKJONES for giving me the idea... of course it only occurred to me after he mentioned it, that this would be quite useful for a lot of people besides ourselves
There are two ways of doing this.
#1
as per MERKJONES suggestion you can just add the files to your "windows/system32" directory.
#2
I like to keep my files organized in my own folders and be able to put them on any partition that I want. So to do this we just need to add the path of your folder containing adb and fastboot files to the windows Environment path.
IN XP/WINDOWS 7/VISTA
Right click on "my computer"
Left click on "properties"
Then.........
IN VISTA/WINDOWS 7 (this is an extra step for these two OS"s ignore this if you are using XP)
Click on "Advanced System Settings" in the left hand pane.
IN ALL WINDOWS
Make sure you are on the "Advanced" tab of the System Properties Panel.
Click on "Environment Variables" button.
Look for a line/variable that says "Path" in "System variables" pane.
Double click on "Path" to open a new window that should be say "Edit System Variable" or select the "Path" variable and click on the Edit Button.
Navigate to the end of the line/value and add
;path to files (where "path to files" is the location of your adb and fastboot files)
For example for me this is
;E:\AndroidFiles
So your path should look something like this
%SystemRoot%\system32;%SystemRoot%;E\AndroidFiles
Now reboot and you can open up a DOS Command Prompt window and use these programs in any directory you want by just typing them like any other DOS command.
Awesome.... I hope this can help some folks out
or as i have mentioned to MANY people in MANY threads, place the adb and fastboot in your system32 folder and you are good. but why should you use the search function when you can just post a new thread that says the same thing many other threads say
tubaking182 said:
or as i have mentioned to MANY people in MANY threads, place the adb and fastboot in your system32 folder and you are good. but why should you use the search function when you can just post a new thread that says the same thing many other threads say
Click to expand...
Click to collapse
LOL... Was thinking the same thing. This has been talked about over and over
PS... the "other" way of doing it I think was actually written by Stericson originally
momentarylapseofreason said:
LOL... Was thinking the same thing. This has been talked about over and over
PS... the "other" way of doing it I think was actually written by Stericson originally
Click to expand...
Click to collapse
You are right of course, I probably should have checked first... so no offense to anyone there are sooooo many threads to keep up with and a search can often bring up so many threads that is easy to miss something.
Actually I am sure that although Stericson may have also written it... he is far from the first person as it is really quite a common thing ... I just wanted to help let people know there was an easier way of doing things.
or as i have mentioned to MANY people in MANY threads, place the adb and fastboot in your system32 folder and you are good. but why should you use the search function when you can just post a new thread that says the same thing many other threads say
Click to expand...
Click to collapse
No offense.... but I personally don't like throwing file after file into my system32 folder as it can get messy... hence adding it to the Environment Path
Sometimes things can be repeated over and over and still get lost in a long thread... so I tried to make it more obvious for people to find the information
pixel-painter said:
You are right of course, I probably should have checked first... so no offense to anyone there are sooooo many threads to keep up with and a search can often bring up so many threads that is easy to miss something.
Actually I am sure that although Stericson may have also written it... he is far from the first person as it is really quite a common thing ... I just wanted to help let people know there was an easier way of doing things.
No offense.... but I personally don't like throwing file after file into my system32 folder as it can get messy... hence adding it to the Environment Path
Sometimes things can be repeated over and over and still get lost in a long thread... so I tried to make it more obvious for people to find the information
Click to expand...
Click to collapse
you dont have to put it in your system32 folder.
Put your backed up img files (all files from nandroid backup) in the same folder as fastboot, then open command-prompt
you then need to change directory to the location of the folder with this command
cd c:\where ever the fastboot folder is
(if its just in the c drive then the command would look like this)
cd c:\fastboot
enter, and you will then get
C:\fastboot>
then just type these commands.
fastboot flash system system.img
fastboot flash userdata data.img
fastboot flash boot boot.img
fastboot reboot
this is how i restore and have been doing it this way everytime no problems.
^^ Sorry but I think you missed the point entirely The idea is to avoid doing that so one can use the programs from any directory.
Both #1 and #2 are really just 2 different ways of accomplishing the same thing
hi im using 5.0.1H build and would like to have root terminal control back. all my commands come back permission denied. Fastboot works for me for nandroid but when i try to follow the instructions on gaining superuser i get this
C:\Documents and Settings\Owner.YOUR-D592011E4B\Desktop\Superuser>adb push bin/s
u /system/bin
error: device not found
C:\Documents and Settings\Owner.YOUR-D592011E4B\Desktop\Superuser>adb shell chmo
d 4755 /system/bin/su
error: device not found
C:\Documents and Settings\Owner.YOUR-D592011E4B\Desktop\Superuser>adb uninstall
koushikdutta.superuser
- waiting for device -
what could i be doing wrong.
Hi,
Try doing:
adb devices see if your phone is recognized by the computer
adb remount enable read /write access
Now you can use your other commands.
maydaysos said:
hi im using 5.0.1H build and would like to have root terminal control back. all my commands come back permission denied. Fastboot works for me for nandroid but when i try to follow the instructions on gaining superuser i get this
C:\Documents and Settings\Owner.YOUR-D592011E4B\Desktop\Superuser>adb push bin/s
u /system/bin
error: device not found
C:\Documents and Settings\Owner.YOUR-D592011E4B\Desktop\Superuser>adb shell chmo
d 4755 /system/bin/su
error: device not found
C:\Documents and Settings\Owner.YOUR-D592011E4B\Desktop\Superuser>adb uninstall
koushikdutta.superuser
- waiting for device -
what could i be doing wrong.
Click to expand...
Click to collapse
Connect my G1 with my laptop(Ubuntu 8.10 x64)
When I run the adb devices, it only said: List of devices attached
No devices line; It lists one line when I start the emulator program.
And not like the SDK for windows, there is not some folder related to drivers.
Does it support for linux x64? plz help.~
have you activated the debugger in your g1 ?
oh I remember when I was in ubuntu now
you gotta launch adb daemon as root
try this :
adb kill-server && sudo adb devices
and let me know if it worked
dixxa said:
have you activated the debugger in your g1 ?
Click to expand...
Click to collapse
Absolutely, it works fine in Vista x64 with SDK 1.1 r1
I had to do two things to get this to work (although this was on x86) -
1) Build the kernel with the Android drivers enabled. This might not be necessary; I have no idea if they are turned on in the kernels you get from the Ubuntu repository as mine has been custom built for a while, but I'm guessing that they aren't enabled by default because they are in the "staging" area as of 2.6.29.1. So these were in Device Drivers/Staging Drivers/Android.
2) Add a "50-android.rules" file to /etc/udev/rules.d that has this line:
SUBSYSTEM=="usb",SYSFS{idVendor}=="0bb4",SYMLINK+="android_adb",MODE="0666"
The idVendor is different if you have an ADP phone, I believe; this was the value worked for mine (non-dev). You can do an 'lsusb' after it's been plugged in and see what shows up. Also, try grepping /var/log/messages for "udev" after you plug it into a USB port and see if there are meaningful messages.
- Chris
Hi all,
I got similar issue here, the main difference is that i got ubuntu 9.04.
running adb daemons as root permit to see devices when it's started normally, but not when in fastboot mode.
I tried all suggestions above (and others!) without success :/
Thanks for any help
noz.geek said:
Hi all,
I got similar issue here, the main difference is that i got ubuntu 9.04.
running adb daemons as root permit to see devices when it's started normally, but not when in fastboot mode.
I tried all suggestions above (and others!) without success :/
Thanks for any help
Click to expand...
Click to collapse
copy the 50-android.rules file you created into a file called 51-android.rules. The problem is related to the order in which things are launched and copying this file to the new name will solve your problem.
I should also note that you will have to restart udev Or reboot or logout/in
to restart udev, In terminal type:
Code:
sudo /etc/init.d/udev restart
sudo is necessary~ thx
Hi all,
After creating 50-android.rules file in /etc/udev/rules.d, I can mount my sdcard on my gPhone to Ubuntu8.04 but I still see no thing when i type command : adb devices. I also did some commands which you gave here. Can anybody help me?
Thanks so much,
NPAK
npak243 said:
Hi all,
After creating 50-android.rules file in /etc/udev/rules.d, I can mount my sdcard on my gPhone to Ubuntu8.04 but I still see no thing when i type command : adb devices. I also did some commands which you gave here. Can anybody help me?
Thanks so much,
NPAK
Click to expand...
Click to collapse
Code:
$ sudo mv /etc/udev/rules.d/50-android.rules /etc/udev/rules.d/51-android.rules/code]
that should fix it ;)
Thanks,
It can work now!
I have the same problem here. adb used to be able to see my phone when I was using Ubuntu 8.10. After I upgraded to 9.04, it never worked. I tried change the udev rule file from 50-** to 51-** or as haykuro suggested to 51-**/code. I also changed the permission to 777. And I did kill and restart adb-server several times under root, but I still get nothing~~~
Can anyone help?
Is there any step by step tutorial to get my htc magic rooted
I can only find posts where they say it is like on windows but without installing files but i have no idea how to enter that prompts on terminal
it would be much appreciated any help. I know i am not the only one interested
cesardeluxe said:
Is there any step by step tutorial to get my htc magic rooted
I can only find posts where they say it is like on windows but without installing files but i have no idea how to enter that prompts on terminal
it would be much appreciated any help. I know i am not the only one interested
Click to expand...
Click to collapse
The commands are the same. Just like Linux users can follow Windows directions but with some substitutions.
Download the SDK here: http://developer.android.com/sdk/1.5_r3/index.html
Follow the instructions here: http://developer.android.com/sdk/1.5_r3/installing.html
Once you have the SDK setup, you can follow the steps given in the rooting threads/wiki. Any time it says to enter a command you do it in your terminal (which on OSX i think is Terminal.app, use Spotlight to find it).
Hope this helps a bit.
i dont get this:
Code:
On a Mac, look in your home directory for .bash_profile and proceed as for Linux. You can create the .bash_profile if you haven't already set one up on your machine
i don't have that .bash_profile how do i create it?
thanks
Google easy to use and always there for you.
Clinton
yeah but all tutorials are made for xp or even linux.
I have tried to create it using vi command then edited with the path o the sdk tools
but when i type adb it doesn't do anything
i am stuck there
Did you check my link for your bash_profile ? This help at all?
Clinton
cesardeluxe said:
yeah but all tutorials are made for xp or even linux.
I have tried to create it using vi command then edited with the path o the sdk tools
but when i type adb it doesn't do anything
i am stuck there
Click to expand...
Click to collapse
Try reading this:
http://www.tech-recipes.com/rx/2621/os_x_change_path_environment_variable/
Sounds like the Path variable may be in a different file. It is the same on linux, I think it can be in a few places.
Irf you want to use adb without messing with your path you can do the following:
Code:
cd <android-sdk-location>/tools
./adb devices
This is convoluted so get that PATH working and everything should be nice and easy! Good luck.
I use a Mac, and when I was getting started I used the linux tutorials with no problem.
i can push the 2 files using commands to my sd. Adb devices shows my htc ok
but after i enter to fastboot mode the device is no longe shown
i type
Code:
./fastboot boot recovery-new.img
but the only thing i get is
Code:
-bash: fastboot: command not found
i am on tools directory on terminal
i think fastboot is not in the tools directory ...
i'd rather say the error is caused by that then a missing connection.
Does the phone write "FASTBOOT USB" ?
if you type "ls", can you find a file named fastboot in your directory?
cesardeluxe said:
i can push the 2 files using commands to my sd. Adb devices shows my htc ok
but after i enter to fastboot mode the device is no longe shown
i type
Code:
./fastboot boot recovery-new.img
but the only thing i get is
Code:
-bash: fastboot: command not found
i am on tools directory on terminal
Click to expand...
Click to collapse
The files have to be executable. You can do that by running:
Code:
chmod -R +x /path/to/tools
This makes all the files in the tools directory executable with ./
About the .bashrc or .bash_profile if you don't have one in your home directory you can safely make one. With the following command:
Code:
echo "export PATH=$PATH:/path/to/tools/" > ~/.bashrc
or if the file exists just do:
Code:
echo "export PATH=$PATH:/path/to/tools/" >> ~/.bashrc
Remember to restart the shell after you are done with this.
the reason adb work for you is because adb is in tools directory
fastboot does not. You have to get fastboot somewhere else
Whenever you get command not found, you can run another command to check
ls <program you ran>, and see what happened
Example
in your tools directory, where you have no problem running adb push, try doing "ls adb", without the quote
in your tools directory, where you have problem running fastboot, try doing "ls fastboot", without the quote
and you should see what's going on
BTW, this is fairly basic unix environment. If you are having trouble at this stage, you need to get yourself more familiar with unix environment, which is what osx is based on
I am sorry, but i don't really know where's good tutorial on unix
On google, i just search for "mac osx unix shell tutorial:, and come across this site
http://www.osxfaq.com/tutorials/LearningCenter/
Hope this help
Edit 1: btw, here's where you can find fastboot for MAC. Put it in your tools directory. IF you keep the filename as is, you need to type fastboot-mac whenever you see someone mention fastboot
http://www.htc.com/www/support/android/adp.html
yeah you're right fastboot is not on that tools directory. in fact i have looked into the whole sdk folder and i can't find it.
thanks
hey i managed to apply the update thanks to having fastboot-mac on tools folder
but after booting i go to terminal to apply the final step and i get this
Code:
MBdeluxe:tools cesarleon$ ./adb shell flash_image recovery /sdcard/recovery-new.img
error reading /sdcard/recovery-new.img header: Is a directory
what's wrong ?
thank you people
cesardeluxe said:
hey i managed to apply the update thanks to having fastboot-mac on tools folder
but after booting i go to terminal to apply the final step and i get this
Code:
MBdeluxe:tools cesarleon$ ./adb shell flash_image recovery /sdcard/recovery-new.img
error reading /sdcard/recovery-new.img header: Is a directory
what's wrong ?
thank you people
Click to expand...
Click to collapse
Are u sure that recovery.img got transferred properly? Maybe check the rights on it (it not read only or something). What if you mount the sdcard in OS X and copy and paste (vs push)?
If you're trying to flash the recovery image, try
Code:
adb shell mount -a
adb push recovery-new.img /system/recovery.img
adb push recovery-new.img /sdcard/recovery-new.img
adb flash_image recovery /sdcard/recovery-new.img
Hope that helps
adb shell mount -a
Click to expand...
Click to collapse
didn´t work i think the parameter a is not correct
well this is almost the last step! thank you all for your explanations
cesardeluxe said:
hey i managed to apply the update thanks to having fastboot-mac on tools folder
but after booting i go to terminal to apply the final step and i get this
Code:
MBdeluxe:tools cesarleon$ ./adb shell flash_image recovery /sdcard/recovery-new.img
error reading /sdcard/recovery-new.img header: Is a directory
what's wrong ?
thank you people
Click to expand...
Click to collapse
Very odd error message
Do this to check what your phone's sdcard looks like
Code:
adb shell ls -l /sdcard/recovery-new.img
Next, you should grab the file from your phone to your computer. This step assume you are in your tools directory
Code:
adb pull /sdcard/recovery-new.img recovery-new-phone.img
Finally, try to compare the file you have on your computer against the one you got from your phone, and see if they are the same. This assume you have your working recovery-new.img in tools directory
Code:
diff recovery-new.img recovery-new-phone.img
I have not try this diff command, and I assume it'l handle binary diff
If diff can not handle binary file, do ls and check file size. both file should match
Code:
ls -l recovery-new.img recovery-new-phone.img
If your computer and phone recovery-new.img are not the same, download to phone again
cesardeluxe said:
didn´t work i think the parameter a is not correct
well this is almost the last step! thank you all for your explanations
Click to expand...
Click to collapse
You will get Failed Mounts when u run
Code:
adb shell mount -a
You CAN ignore them.
See here: http://forum.xda-developers.com/showthread.php?p=4029461
This may not be the right way to do it but I always just downloaded the recovery to the tools directory of the android sdk. Then fire up the phone in fastboot mode and do:
./fastboot flash recovery recovery-new.img
(replacing recovery-new.img with the name of the downloaded img file.)
I'm sure there is a reason people are doing it the other way, but for myself one command to do the flash is alot easier!
Ok, I have fedora 11 installed on most of my computers, since i love this distro to death. My big thing was trying to get adb to work. This is my guide to get it to work, for now.
First things first. Navigate to /etc/udev/rules.d as root. Create a rules file called 50-android.rules (touch 50-android.rules). NOTE: You are better off looking at the contents and picking a rules number set other than what is listed. Sometimes udev is picky. For the newbies, so if any rules start with '50', then change the number by one or two, like 51 or 52. Paste this into the file:
Code:
SUBSYSTEM=="usb",ATTRS{idVendor}=="0bb4",SYMLINK+="android_adb",MODE="0666"
Make sure you use ATTRS, not ATTR or SYSFS, since this is a newer updated udev system.
After that, run udevadm control --reload-rules to reload your rules files. Now just run ./adb devices as root to make sure it recognized your HTC dream. I am working on this fix right now so you don't need to be root, keep patient. Now you can adb shell into your device either as root OR normal user, just as long as you start the server as root. This is a permissions problem, and hopefully I can fix this and/or find a fix soon.
I wrote this because i searched high and low through google, and only found a few good parts as far as a fix. Hopefully this helps a few people out there.
Just wondering if this has helped anyone. If not, delete this thread or do whatever with it....
I have adb on my eeepc 900 with f11 I believe this method works too as well. although it says it has been tested with ubuntu, it works pretty well with f11.
http://www.talkandroid.com/android-sdk-install-guide/
Installing The Android SDK
First you will need to download the Android SDK pack .zip archive, once downloaded find a suitable installation location on your machine and extract the zipped files.
Please note: This installation location will be referred to as $SDK_ROOT from now on through this tutorial
Alternatively you can add /tools to your root path which will prevent the need to specify the full path to the tools directory along with enabling you to run Android Debug Bridge (adb) along with other command line tools.
To add /tools:
Linux
1. Edit the ~/.bash_profile or ~/.bashrc files looking for a line that sets the PATH variable.
2. Add the full path location to your $SDK_ROOT/tools location for the PATH variable.
3. If no PATH line exists you can add the line by typing the following:
4. export PATH=${PATH}:<path to your $SDK_ROOT/tools>
Click to expand...
Click to collapse
It helped me, since the creation of the file my OpenSuSE 11.0 recognizes the phone perfectly
Thanks a lot for your hint.
thanks it helped me. ill be looking forward to getting it to work without root
just use sudo instead
Just a heads up for user's using Ubuntu 9.10, this isn't needed. I connected my G1 to it and ran ADB with no adjustments to udev or anything else.
Pretty much it works out of the box.
Here is my version
download the .tgz file from googlecode
http://developer.android.com/sdk/index.html
sudo tar -xzvf android-sdk_r3-linux.tgz
Click to expand...
Click to collapse
Code:
sudo gedit ~/.bash_profile
heres my bash_profile
# .bash_profile
# Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi
# User specific environment and startup programs
PATH=$PATH:$HOME/bin
export PATH=$PATH:/android-sdk-linux/tools
Click to expand...
Click to collapse
logout
login
connect android g1 device via usb to pc
open a terminal
Code:
adb devices
if you cant get a device try it with superuser.
Don't you think that this is all just a little bit excessive?
To make it work in F11, just do this;
Download SDK, extract.
To use, type:
/path/to/sdk/tools/adb
Another option is to edit the /etc/profile and add
PATH=$PATH:/<Path to android-sdk>/tools
This option will allow any user to use the adb tools when logged in or if you
su -
into another user
I wrote a short guide as well for Windows and Ubuntu. Might help others.
Unfortunately, as anyone with a passing acquaintence with ADB knows, the scrolling issue can be a killer. I swear the other day I pressed "up" twice and it composed "rm /sdcard/rootfs.img /sdcard/system.ext2" and executed it. We run Android on our SD's btw.. Was not cool. Instead, I use ADB via telnet and it works beautifully. Here's how:
Code:
adb shell telnetd &
adb forward tcp:9999 tcp:23
Now type this: "telnet localhost 9999"
Enter "root" and hit enter
Finally update PATH: "export PATH=/usr/bin:/usr/sbin:/bin:/sbin:/system/sbin:/system/bin:/system/xbin:/system/xbin/bb:/data/local/bin"
Okay, so 4 lines to enter and you have a "regular, sane" shell connection to the phone and you can actually scroll through history and text without it jumbling the text and executing random code. Enjoy.
lbcoder said:
Don't you think that this is all just a little bit excessive?
To make it work in F11, just do this;
Download SDK, extract.
To use, type:
/path/to/sdk/tools/adb
Click to expand...
Click to collapse
that works too as well but i would rather open up a terminal and type
sudo adb devices
sensimila said:
that works too as well but i would rather open up a terminal and type
sudo adb devices
Click to expand...
Click to collapse
WHY would you want to make it *MORE COMPLICATED*??
There is NO NEED for root.
/path/to/adb ...
THATS ALL.
This is kind of funny... i wrote this because i had trouble with it, so i am just sharing my fix...
In case this is interesting to someone:
The fix mentioned in the first post has to be applied to open SuSE x86 and x64 edition to make the G1 work. The external device works without it, but not the adb device.
Thanks again!
Just wanted to come and post that this does work with OpenSUSE 11.2 x86. Did this hoping to get adb to work with my LG Ally and it does. Thanks!
(Still) works for me on 64bit SUSE 11.4.
Before adding this file, I could not access my device with adb, received permissions errors.
Added this file, and I can shell into my device.
Permissions on adb itself was not the problem, it was access to the device when udev found it.
[edit]Actually used the lines from http://developer.android.com/guide/developing/device.html[/edit]
Downloaded and extracted the SDK from Android's website. Copied the path to my $PATH and when I run 'adb' I get this:
dyld: Symbol not found: ___stack_chk_guard
Referenced from: /Users/Brainchild/Desktop/android-sdk-mac_x86/platform-tools/adb
Expected in: /usr/lib/libSystem.B.dylib
Trace/BPT trap
Click to expand...
Click to collapse
I've searched and nothing I find either works or is relevant. I've no idea what to do from here.
himom said:
Downloaded and extracted the SDK from Android's website. Copied the path to my $PATH and when I run 'adb' I get this:
I've searched and nothing I find either works or is relevant. I've no idea what to do from here.
Click to expand...
Click to collapse
Can you clearly explain what you did? Are you trying to create a variable to run ADB in terminal without having to write the whole path down?
if so do this:
cd ~
pico bash .bash_profile
type:
export PATH${PATH}:/where you smacked your sdk (should end with platform-tools)
control-x
Y
Close terminal and restart
Should work magical wonders and awesomeness.
himom said:
Downloaded and extracted the SDK from Android's website. Copied the path to my $PATH and when I run 'adb' I get this:
I've searched and nothing I find either works or is relevant. I've no idea what to do from here.
Click to expand...
Click to collapse
Type
Code:
cd /Users/Brainchild/Desktop/android-sdk-mac_x86/platform-tools/adb
Hit enter.
Then type an adb command with your device plugged in your computer. Make sure to put a "./" with no quotes or spaces before any adb or fastboot command.
It should look something like this:
Code:
./adb remount
Hit enter. It should say "remount successful" if it does than you are good. If not than let us know