So i'm trying to install the cupcake build and i'm having difficulties in the terminal. chmod takes but when I try and execute the next command, like shown below, I get the following error. I have installed fastboot, hard spl and the modded jf1.42.
Macintosh:cupcake josephaaronmoody$ chmod a+x fastboot
Macintosh:cupcake josephaaronmoody$ ./fastboot flash system system.img
-bash: ./fastboot: cannot execute binary file.
plz help! [email protected]
I hate to think I could be liable for you bricking your phone, but as far as I know the ./ in front of fastboot shouldn't be there, and the command should just start with fastboot. I haven't installed cupcake but when I have used fastboot, commands have never start with "./"
What? ./ is how you launch binaries in linux (or osx). It looks like you might be using the linux binary and not the osx one.
try fastboot-osx-10_5.zip from http://forum.xda-developers.com/showthread.php?t=456071
thanks
That's the one I dl'ed but the instructions on the koush page are the one's i'm following. that's where I got the commands.
Ok everyone. First off do not update your phone if Sprint offers an upate. I don't think they are going to but if they do anytime soon and you update this exploit could likely be fixed. When updates are released the devs will make updates that keep root so do not update!
That said, this is a very newbie guide. This is meant for Windows but I will post instructions for linux as well (Ubuntu). I just need to warn you that I can't adb into my phone from Ubuntu so I have to do it through Windows. Don't know why it doesnt work but it doesnt. Mac users you can always (assuming you can get it to work in Ubuntu) download a live cd and boot into Ubuntu to try this. I don't have a mac (nor do I want one) so I can't give instructions (though I assume they should be relatively the same).
Step 1:
First you need to download the Android SDK. It may soumd confusing but it's not. There are tools in here that we need. You can get it from http://developer.android.com/sdk/index.html. This is a modular SDK and all the tools we need are in this download. Once downloaded you just need to extract it in a directory of choice.
The next thing we download is asroot2. This is a script that was developed that runs an exploit in Android's linux that allows us to run root. The link for that is here: http://forum.xda-developers.com/attachment.php?attachmentid=244212&d=1257621154. Unzip that file and place it in a directory of your choice. Also download http://www.androidspin.com/downloads.php?dir=amon_ra/RECOVERY/&file=recovery-RA-heroc-v1.2.3.img and place that into the same directory you extracted asroot2.
Step 2:
Connect the phone to the USB port.
Ubuntu is easy for this (again assuming it works for you). Simply open a terminal and cd into the directory that you extracted the sdk into. Then cd into the tools directory. Then run the following commands:
sudo ./adb push /directory_you_placed_asroot2/asroot2 /data/local/
sudo ./adb shell chmod 0755 /data/local/asroot2
/data/local/asroot2 /system/bin/sh
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
cd /system/bin
cat sh > su
chmod 4755 su
If all goes well you should be presented with a new prompt. This is the linux terminal built into Android. This will allow us to execute all the commands we need to execute because the asroot2 script gave us root access.
In Windows it is a little more difficult. You have to first install the driver for the phone. When Windows asks you for the drivers direct Windows to the directory you extracted the SDK into. You should see a folder called usb_driver. If you are running the 32 bit version of Windows select the x86 folder. If you are using a 64 bit version then select the x64 folder. Then select the android_usb.inf file. This should install the drivers.
If running XP or lower you will need to go to the start menu and click run, then you enter cmd and press enter. If Vista or higher you will press the start button and type cmd and press enter. When you are at the command prompt you cd to the directory you extracted the sdk into. Then cd into the tools directory. Then execute the following commands:
adb push /directory_you_placed_asroot2/asroot2 /data/local/
adb shell
chmod 0755 /data/local/asroot2
/data/local/asroot2 /system/bin/sh
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
cd /system/bin
cat sh > su
chmod 4755 su
Now your phone is officially rooted! We arent done yet though. Now you need to flash the recovery image. If you are still in adb shell type in exit until you are out. You should be in the directory where you extracted the recovery image. If not go there. Type in the following:
adb push recovery-RA-heroc-v1.2.3.img /sdcard/
Once that is done, type in adb shell (or sudo ./adb shell in ubuntu). If your command prompt is a dollar sign then type in su and press enter. If it is a pound sign you are good. Then type in the following:
adb shell flash_image recovery recovery-RA-heroc-v1.2.3.img
Once that is finished you are done. To reboot into recovery type in adb shell reboot recovery. You should reboot into recovery mode. Right now there is not a lot you can do but once we have some devs who make some roms then we will be well on our way to an even more awesome phone. Any questions please ask away. Also, I am sorry if this tutorial is hard to understand or badly laid out. My daughter is crawling all over me so it's hard to type or think. Good luck all and thanks to everyone who rooted this phone and made the recovery and did such a great job!
chuckhriczko said:
adb shell flash_image recovery recovery-RA-heroc-v1.2.3.img
Click to expand...
Click to collapse
Is this the right command, every time I try I get : "adb: not found"
The transfer to the sd card seemed to go fine, and I am @ root (#).
Am I missing something?
You beat me to it!!!! I was planning on laying out the steps to make sure I had my head on straight.
To continue with your guide: (The following are questions, not procedures)
1. We run a Nandroid back up to lock in our stock ROM so if we ever do something stupid, aka brick the phone, we can push this back on?
2. What comes on the SD card? Is it needing to be backed up when I go to a 16GB class 6 card?
3. Insert the new SDcard and use the ext2/swap/fat32 script
4. convert ext2 to ext3, (now ready for apps2SD?)
Anything else you can add would be nice.
Again thanks for the steps! They are clear for me.
rockcrawler said:
Is this the right command, every time I try I get : "adb: not found"
The transfer to the sd card seemed to go fine, and I am @ root (#).
Am I missing something?
Click to expand...
Click to collapse
Sounds like you need to add the directory where you have adb to be added to he path. is your adb in the same dir as the image?
rockcrawler said:
Is this the right command, every time I try I get : "adb: not found"
The transfer to the sd card seemed to go fine, and I am @ root (#).
Am I missing something?
Click to expand...
Click to collapse
You may currently be in adb shell already. If you are showing the pound sign this is likely. The command is supposed to be run outside of adb shell. Try the command below:
flash_image recovery recovery-RA-heroc-v1.2.3.img
Treefallingquietly said:
Sounds like you need to add the directory where you have adb to be added to he path. is your adb in the same dir as the image?
Click to expand...
Click to collapse
I apologize, but that went right over my head.
I have used this command to copy the image to the sd card.
Code:
adb push recovery-RA-heroc-v1.2.3.img /sdcard/
I got this output:
Code:
C:\androidSDK\android-sdk-windows\tools>adb push recovery-RA-heroc-v1.2.3.img /s
dcard/
1640 KB/s (3352576 bytes in 1.996s)
I then do the following with the noted result:
Code:
C:\androidSDK\android-sdk-windows\tools>adb shell
$ su
su
# adb shell flash_image recovery recovery-RA-heroc-v1.2.3.img
adb shell flash_image recovery recovery-RA-heroc-v1.2.3.img
adb: not found
Any help as to where I making my mistake would be greatly appreciated.
Treefallingquietly said:
You beat me to it!!!! I was planning on laying out the steps to make sure I had my head on straight.
To continue with your guide: (The following are questions, not procedures)
1. We run a Nandroid back up to lock in our stock ROM so if we ever do something stupid, aka brick the phone, we can push this back on?
Click to expand...
Click to collapse
Yes. A nandroid backup completely backs up every piece of information on your phone. It is a complete image of your phone and if it needs to be restored for whatever reason you just load up recovery and can restore it the way it was before.
Treefallingquietly said:
2. What comes on the SD card? Is it needing to be backed up when I go to a 16GB class 6 card?
Click to expand...
Click to collapse
What do you mean exactly? The only thing that gets copied to an sd card is the nandroid backup so yes, when switching to an sd card just do another backup. Or you can also copy the nandroid folder from your existing sd card to your new one.
Treefallingquietly said:
3. Insert the new SDcard and use the ext2/swap/fat32 script
4. convert ext2 to ext3, (now ready for apps2SD?)
Click to expand...
Click to collapse
Yes and no. Just run the ext2/swap/fat32 script and it should be ready for apps2sd. You can convert to ext3 if you want. Generally on normal hard drives ext3 is faster, however there has been some controversy with that on android phones. As for converting to apps2sd, right now the best way is probably the manual method which I can write up a tutorial on as well. The dream forum has some good tutorials on it as they were the first to do it. I actually need to go back and re read some of those because it's been so long since I did it. I tried the apps2sd apk but that didnt seem to work for me.
rockcrawler said:
I apologize, but that went right over my head.
I have used this command to copy the image to the sd card.
Code:
adb push recovery-RA-heroc-v1.2.3.img /sdcard/
I got this output:
Code:
C:\androidSDK\android-sdk-windows\tools>adb push recovery-RA-heroc-v1.2.3.img /s
dcard/
1640 KB/s (3352576 bytes in 1.996s)
I then do the following with the noted result:
Code:
C:\androidSDK\android-sdk-windows\tools>adb shell
$ su
su
# adb shell flash_image recovery recovery-RA-heroc-v1.2.3.img
adb shell flash_image recovery recovery-RA-heroc-v1.2.3.img
adb: not found
Any help as to where I making my mistake would be greatly appreciated.
Click to expand...
Click to collapse
Yeah. The problem is that you are trying to adb shell twice. After you adb push then just run the command adb shell flash_image recovery recovery-RA-heroc-v1.2.3.img. That should work.
chuckhriczko said:
You may currently be in adb shell already. If you are showing the pound sign this is likely. The command is supposed to be run outside of adb shell. Try the command below:
flash_image recovery recovery-RA-heroc-v1.2.3.img
Click to expand...
Click to collapse
Now I get the Following:
Code:
# flash_image recovery recovery-RA-heroc-v1.2.3.img
flash_image recovery recovery-RA-heroc-v1.2.3.img
error opening recovery-RA-heroc-v1.2.3.img: No such file or directory
#
And this outside adb shell, in the same directory where I did the push:
Code:
C:\androidSDK\android-sdk-windows\tools>adb shell flash_image recovery recovery-
RA-heroc-v1.2.3.img
error opening recovery-RA-heroc-v1.2.3.img: No such file or directory
Ideas?
rockcrawler said:
Is this the right command, every time I try I get : "adb: not found"
The transfer to the sd card seemed to go fine, and I am @ root (#).
Am I missing something?
Click to expand...
Click to collapse
yes he left out the /sdcard/in the path and if you are in teh shell you don't need the adb portion of the command.
rockcrawler said:
Now I get the Following:
Code:
# flash_image recovery recovery-RA-heroc-v1.2.3.img
flash_image recovery recovery-RA-heroc-v1.2.3.img
error opening recovery-RA-heroc-v1.2.3.img: No such file or directory
#
And this outside adb shell, in the same directory where I did the push:
Code:
C:\androidSDK\android-sdk-windows\tools>adb shell flash_image recovery recovery-
RA-heroc-v1.2.3.img
error opening recovery-RA-heroc-v1.2.3.img: No such file or directory
Ideas?
Click to expand...
Click to collapse
Ok. Most likely you dont have the recovery image in the directory. Try this. Copy the recovery image to the tools directory of the sdk. Then, outside of adb shell, (making sure you are in the tools directory of the sdk) execute the following command:
adb shell flash_image recovery recovery-RA-heroc-v1.2.3.img
This should work as long as you have the recovery image in the correct directory.
can i use the rom from modaco? or at least the themes?
magicalan said:
can i use the rom from modaco? or at least the themes?
Click to expand...
Click to collapse
No way! This rom is a GSM rom and if it works at all and does not brick your phone then it wont have the right software to make your phone work. A dev has to create a rom specially for the CDMA Hero that has the right drivers.
chuckhriczko said:
Ok. Most likely you dont have the recovery image in the directory. Try this. Copy the recovery image to the tools directory of the sdk. Then, outside of adb shell, (making sure you are in the tools directory of the sdk) execute the following command:
adb shell flash_image recovery recovery-RA-heroc-v1.2.3.img
This should work as long as you have the recovery image in the correct directory.
Click to expand...
Click to collapse
I am feeling really special, not being able to make this work, but that is the folder that it has been in all this time. I have even downloaded and pushed it several times. Proof:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So I am not sure where I am messing up.
Thanks for all the help and hard work on this BTW!
rockcrawler said:
I am feeling really special, not being able to make this work, but that is the folder that it has been in all this time. I have even downloaded and pushed it several times. Proof:
So I am not sure where I am messing up.
Thanks for all the help and hard work on this BTW!
Click to expand...
Click to collapse
Meh. Not hard work. Just experience. The hard work is what the rom devs do. And it is difficult at first but once you get it trust me, you get it.Okay let's try this. Go into the command prompt (not adb shell) into the folder where adb and the recovery image is. Try to execute the following command and see if it works.
Code:
adb push recovery-RA-heroc-v1.2.3.img /sdcard/
This will put the recovery image on the sdcard. If this works then we will continue.
chuckhriczko said:
Meh. Not hard work. Just experience. The hard work is what the rom devs do. And it is difficult at first but once you get it trust me, you get it.Okay let's try this. Go into the command prompt (not adb shell) into the folder where adb and the recovery image is. Try to execute the following command and see if it works.
Code:
adb push recovery-RA-heroc-v1.2.3.img /sdcard/
This will put the recovery image on the sdcard. If this works then we will continue.
Click to expand...
Click to collapse
Done.
Code:
C:\androidSDK\android-sdk-windows\tools>adb push recovery-RA-heroc-v1.2.3.img /s
dcard/
1747 KB/s (3352576 bytes in 1.873s)
C:\androidSDK\android-sdk-windows\tools>
rockcrawler said:
Done.
Code:
C:\androidSDK\android-sdk-windows\tools>adb push recovery-RA-heroc-v1.2.3.img /s
dcard/
1747 KB/s (3352576 bytes in 1.873s)
C:\androidSDK\android-sdk-windows\tools>
Click to expand...
Click to collapse
Sweetness. Ok. Now type in the following:
Code:
$ adb shell
$ cd /sdcard/
$ su
# flash_image recovery recovery-RA-heroc-v1.2.3.img
That should work. Note, don't type in the $ or the #. Those are just there to show what the command prompt should look like.
THANK YOU!!!!!
chuckhriczko said:
Sweetness. Ok. Now type in the following:
Code:
$ adb shell
$ cd /sdcard/
$ su
# flash_image recovery recovery-RA-heroc-v1.2.3.img
That should work. Note, don't type in the $ or the #. Those are just there to show what the command prompt should look like.
Click to expand...
Click to collapse
Worked Like a charm, THANK YOU!!! Just booted to the recovery image and all is well.
p.s. Might want to edit the origional instructions, one your daughter goes to bed, to include the cd to the sd card, that is where my problem was.
rockcrawler said:
Worked Like a charm, THANK YOU!!! Just booted to the recovery image and all is well.
p.s. Might want to edit the origional instructions, one your daughter goes to bed, to include the cd to the sd card, that is where my problem was.
Click to expand...
Click to collapse
If I am able to I will. I understand that the instructions were a little hard to follow for beginners which was what I wanted to avoid. Glad you got it working though. Welcome to the world of Android hacking and please enjoy your stay
I'm getting suck trying to push the recovery img out to my sdcard
Code:
C:\AndroidSDK\tools>adb push recovery-RA-heroc-v1.2.3.img /sdcard/
cannot stat 'recovery-RA-heroc-v1.2.3.img': No such file or directory
I believe I have root access:
Code:
C:\AndroidSDK\tools>adb shell
$ su
su
#
For anyone having issues with running this in linux.
I used zikronix guide and modified it for use in a linux support thread. The original thread can be found here:
http://forum.xda-developers.com/showthread.php?t=829045
This is my setup:
-I made sure to show my .bashrc profile and path to my tools folder if you needed help getting that setup as well... If not please ignore.
Code:
[email protected]:~$ cat .bashrc | grep adb
alias start-adb='sudo /usr/local/android-sdk/tools/./adb start-server'
alias kill-adb='sudo /usr/local/android-sdk/tools/./adb kill-server'
[email protected]:~$ cat .bashrc | grep android-sdk
export PATH="/usr/local/android-sdk/tools/:${PATH}"
[email protected]:~$ $PATH
bash: /usr/local/android-sdk/tools/:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:
Download: http://www.wackynoodle.com/hboot202-s_off-V6.2.zip
Download (Mirror): http://sdx-downloads.com/EVO/devs/jerdog/fixes/hboot202-s_off-V6.2.zip
Now This might make things easier.
-I have this so that you are in the same enviroment that i was in so that the paths will be the same.
Code:
wget http://www.wackynoodle.com/hboot202-s_off-V6.2.zip
mkdir Evo-root
mv hboot202-s_off-V6.2.zip
cd Evo-root
unzip hboot202-s_off-V6.2.zip
- This step I just made sure that adb devices showed my device. If not get it working.
- Once adb devices showed my device properly, I simply ran the following commands.
Code:
adb push root/unrevoked-forever.zip /sdcard/
adb push root/mtd-eng.img /sdcard/
adb push pc36img/PC36IMG-ENG.zip /sdcard/PC36IMG.zip
adb push root/flash_image /data/local/
adb push root/rageagainstthecage /data/local/tmp
adb push root/amon_ra.img /sdcard/
- Then this is just changing permissions. Pretty straight forward.
Code:
adb shell
chmod 0755 /data/local/tmp/rageagainstthecage
chmod 0755 /data/local/flash_image
- Running the script. Should kick you out of adb... If not after 5 min kill the adb server and restart.
Code:
adb shell
./data/local/tmp/rageagainstthecage
- Now you should see a "#", if you do proceed. If not then run the script above again till it works.
Code:
adb shell
- If you saw that "#" run this. This can only be ran as root "#" means root.
Code:
./data/local/flash_image misc /sdcard/mtd-eng.img
Now you are going to want to reboot into the bootloader. Make sure once you do that you selet bootloader and let the PC36IMG.zip load.
Code:
reboot bootloader
After that is done reboot into the new rooted rom. Then make sure adb works again. Then run the following commands. Make sure you terminal is in the same directory this entire time there is no reason to leave the direcory we went into earlier "cd Evo-root" You directory should always be Evo-root. Thanks. The part that I found out was the second command where the entire recovery/ needed the permissions changed to be executable. As you saw in my post on that forum board.
- This will remove the PC36IMG.zip to a different name so that the bootloader won't get confused again. Then the second commands makes the directory executable recursivly. Then the third will reboot you into recovery.
Code:
adb shell mv /sdcard/PC36IMG.zip /sdcard/PC36IMG-ENG.zip
chmod -R +x recovery/
adb reboot recovery
- Now this is going to be done at the recovery screen. As long as you followed the steps above it will work fine. Should only take you about 20 mins to root this phone. Though it took me about 2 hours since no one else has been rooting using linux. I am thinking about writing a script that will root everything and alls you have to do is follow a terminal guide.... But ill see.
- Just run these commands that will allow you to flash the unrevoked-forever.zip. Once you follow the onscreen instructions of the unrevoked-forever.zip you will be able to reboot into the recovery and see the S-Off. Once that is done reboot into the rom, now we need to flash a custom recovery!
Code:
adb push recovery /
adb shell busybox --install /sbin
adb shell nohup /sbin/recovery &
- Again make sure your terminal was never closed and in the same folder. Then simply run these commands to flash the Amon_ra recovery. Since it has wimax capabilities I prefer it.
Code:
adb push root/flash_image /data/local/
adb shell
chmod 0755 /data/local/flash_image
./data/local/flash_image recovery /sdcard/amon_ra.img
reboot recovery
Now you should see the custom recovery and you should be able to flash any rom you desire!
reserved for later use
i see that they are same commands as the pc.., so would this also work with PC?
nickespi said:
i see that they are same commands as the pc.., so would this also work with PC?
Click to expand...
Click to collapse
I am guessing your talking about windows? Sure make sure adb is in your path. Though there are steps in here that are only for linux.
95% success
Well I want to thank you for this thread
It has worked for me I have root I have NAND unlocked
I can flash ROMs
The only issue I have is my radio/baseband and PRI version have been lowered
I have not been able to get thise back where they whould with either update or by using teh wimax.ADDRESS.tree.xml fix (there is no file with that)
If you have any ideas how to fix this would be much appreciated
I am unable to get higher tahn baseband 1.36.00.04.02 in ant rom
when I got teh phone it was 2.15.00.xx.xx
any help would be appreciated
100% Success
THANK YOU
My Evo
Hardware 004
Build 3.30
Hboot 2.02
Baseband 2.15.xx.xx
is now sucessfully rooted.
I did have some problems after being able to flash ROMs of not haveing PRI and Baseband updated.
On thread #787756 there are downloads that can be flashed to fix this problem if anyone else is in that boat.
zikronix sent me there for the fix...I believe he is adding it to the main thread but if it isn't there yet I wanted to add it now for anyone in my boat.
Again this method works and there is success.
Happy rooting
Hey thanx for this Linux guide. Does this steps work with the update 12.25.10 on the windows thread?
Will you update this guide?
Downloaded and extracted the SDK from Android's website. Copied the path to my $PATH and when I run 'adb' I get this:
dyld: Symbol not found: ___stack_chk_guard
Referenced from: /Users/Brainchild/Desktop/android-sdk-mac_x86/platform-tools/adb
Expected in: /usr/lib/libSystem.B.dylib
Trace/BPT trap
Click to expand...
Click to collapse
I've searched and nothing I find either works or is relevant. I've no idea what to do from here.
himom said:
Downloaded and extracted the SDK from Android's website. Copied the path to my $PATH and when I run 'adb' I get this:
I've searched and nothing I find either works or is relevant. I've no idea what to do from here.
Click to expand...
Click to collapse
Can you clearly explain what you did? Are you trying to create a variable to run ADB in terminal without having to write the whole path down?
if so do this:
cd ~
pico bash .bash_profile
type:
export PATH${PATH}:/where you smacked your sdk (should end with platform-tools)
control-x
Y
Close terminal and restart
Should work magical wonders and awesomeness.
himom said:
Downloaded and extracted the SDK from Android's website. Copied the path to my $PATH and when I run 'adb' I get this:
I've searched and nothing I find either works or is relevant. I've no idea what to do from here.
Click to expand...
Click to collapse
Type
Code:
cd /Users/Brainchild/Desktop/android-sdk-mac_x86/platform-tools/adb
Hit enter.
Then type an adb command with your device plugged in your computer. Make sure to put a "./" with no quotes or spaces before any adb or fastboot command.
It should look something like this:
Code:
./adb remount
Hit enter. It should say "remount successful" if it does than you are good. If not than let us know
I am trying to replace my digitizer firmware so G01 will work in place of the 5185FC I replaced.
I was following a guide which told me to type this in:
$adb push 02-3011-4820.ekt /sdcard/
$adb push 02-3011-4820.ekt /sdcard/
$adb shell
$su
#touch_fw_update command -u /sdcard/02-3011-4820.ekt
Click to expand...
Click to collapse
every time I try to push the new touch firmware I get this
"cannot stat '02-3011-4820.ekt': No such file or directory"
adb detects my device, I havea all the naked drivers, Android studio and JDK 64bit installed.... what else do I need to do?
I'm just wondering what I can do to fix this and get my touchscreen working once and for all!
Thank you so much in advance
And you are in the folder where you have put the file you want to push?
Changed the directory in the command prompt to the correct folder?
edit: ok, if it's linux, not the command prompt, but the shell...
compact_wisdom said:
And you are in the folder where you have put the file you want to push?
Changed the directory in the command prompt to the correct folder?
edit: ok, if it's linux, not the command prompt, but the shell...
Click to expand...
Click to collapse
I put the file on the root if the sdcard. Or should i be putting it in the directory of minimaladb/fastboot?
How do i change the directory in the command prompt?
Im using Windows 7 by the way.
hkp2 said:
I put the file on the root if the sdcard. Or should i be putting it in the directory of minimaladb/fastboot?
How do i change the directory in the command prompt?
Im using Windows 7 by the way.
Click to expand...
Click to collapse
Here is the command you are using to push
Code:
adb push 02-3011-4820.ekt /sdcard/
Maybe try this instead .....
Code:
adb push 02-3011-4820.ekt /sdcard
You can change directory with this
Code:
cd
and you can list files once in adb shell like this
Code:
ls
Thx Josh
I wasn't sure what I should cd to. I also tried ls but wasn't sure what to do from there.
I did look at the tutorial for adb and pushed the file into /sdcard/ from my laptop. It seemed to be successful because this is the message I got
943 KB/s <32868 bytes in 0.034s>
Click to expand...
Click to collapse
I proceed to type in the following
adb shell
su
touch_fw_update command -u /sdcard/02-3011-4820.ekt
Click to expand...
Click to collapse
And that's where I'm stuck with a message
sh: touch_fw_update: not found
Click to expand...
Click to collapse
It seems like I'm at least moving forward a couple steps so that's good.
hkp2 said:
I wasn't sure what I should cd to. I also tried ls but wasn't sure what to do from there.
I did look at the tutorial for adb and pushed the file into /sdcard/ from my laptop. It seemed to be successful because this is the message I got
I proceed to type in the following
And that's where I'm stuck with a message
it seems like I'm at least moving forward a couple steps so that's good.
Click to expand...
Click to collapse
Where is this command coming from, a guide or somewhere like that ?
Code:
touch_fw_update command -u
Thx Josh
This guide
snart[dotcom]/replacing-tf300t-digitizer/
Click to expand...
Click to collapse
I'm getting the adb tutorial from here
http://forum.xda-developers.com/showthread.php?t=2266638
Click to expand...
Click to collapse