Xperia X10 mini pro [MOD] FroyoComb v1.2
What is the best cpu frequency for stabile working, i use set cpu app for this.
I use 'coservative' scalling Min: 768 Mhz (when some problems i reduce to 748MHZ or 600Mhz when i dont need more performance) Max: 787 MHz or even 808 Mhz but this freq is too high. Is this scalling are good or use different (ondemand,performance)
Also i have question when my phone is blocked (screen is off) cpu freq back to normal low freq or still have the same freq like in set cpu app ?
No one can give specifics as even with one model of phone the quality of CPU changes so set frequencies differ.
EG: i'm using DHD with 1.6GHz OC "smartass" but some users top out on 1.3GHz, could OC more stable but don't need, regards underclock i've screen off "Powersave" lowest frequency 245MHz don't forget to set priority high.
There is more you can do with set CPU such as underclock on less battery so know get more for criticle phone usage, also temp based so again saving power.
Anyway best bet is to look for other users of x10 and see what they top etc.
Hi,
1) I have installed Kyorarom 0.5.2 OC kernel and here are my SetCPU profiles.
Main - Min: 300 Mhz, Max: 800Mhz
On Call - Min: 83, Max: 400, Priority: 100
Time - 11 PM to 6 AM - Min: 83, Max: 200, Priority: 99
Screen Off: Min: 83, Max: 400, Priority: 98.
My problem is, if I use my phone after 11PM, the time profile gets activated.
But when screen is on, I want to use the main profile. How can I do that?
2) Which governor has less stress on CPU? Conservative or Lagfree?
3) When in the main profile, my phone constantly runs at my max setting, (ie) 800 Mhz. It never runs lower than that. Why does it happen?
maverickgenius said:
Hi,
1) I have installed Kyorarom 0.5.2 OC kernel and here are my SetCPU profiles.
Main - Min: 300 Mhz, Max: 800Mhz
On Call - Min: 83, Max: 400, Priority: 100
Time - 11 PM to 6 AM - Min: 83, Max: 200, Priority: 99
Screen Off: Min: 83, Max: 400, Priority: 98.
My problem is, if I use my phone after 11PM, the time profile gets activated.
But when screen is on, I want to use the main profile. How can I do that?
2) Which governor has less stress on CPU? Conservative or Lagfree?
3) When in the main profile, my phone constantly runs at my max setting, (ie) 800 Mhz. It never runs lower than that. Why does it happen?
Click to expand...
Click to collapse
HI,
1) I dont think that's even possible man... would be nice though
2) conservative
3) how do you know that its for constant? and that's normal if you've chosen 'performance' gov'ner.
PersianSphinx said:
HI,
1) I dont think that's even possible man... would be nice though
2) conservative
3) how do you know that its for constant? and that's normal if you've chosen 'performance' gov'ner.
Click to expand...
Click to collapse
1) Okay. I thought that the main profile is something like a "screen on" profile, which would override all others.
3) I checked using CPU Spy. My phone is always at the highest frequency. I am using conservative.
try a different governor / kernel
maverickgenius said:
1) Okay. I thought that the main profile is something like a "screen on" profile, which would override all others.
3) I checked using CPU Spy. My phone is always at the highest frequency. I am using conservative.
Click to expand...
Click to collapse
I'm not sure about the constant 800. even if it is, as long as battery works well, everything is OK
PersianSphinx said:
I'm not sure about the constant 800. even if it is, as long as battery works well, everything is OK
Click to expand...
Click to collapse
Well, even if the battery works fine, running the processor constantly at 800 MHz will decrease its life.
Does your phone too behave the same way as mine?
maverickgenius said:
Well, even if the battery works fine, running the processor constantly at 800 MHz will decrease its life.
Does your phone too behave the same way as mine?
Click to expand...
Click to collapse
lol, how long are you planning to keep this phone? decreasing the life from 10 years to 8 wont bother me at all (I dont actually know the life)
PersianSphinx said:
lol, how long are you planning to keep this phone? decreasing the life from 10 years to 8 wont bother me at all (I dont actually know the life)
Click to expand...
Click to collapse
Agree with you on that point. But you still didn't answer my question
1) Not possible.
2) Conservative.
3) Problem with conservative governor in Kyoyakernel maybe.
Advice : - Always use On Demand.
Find Kryllios ROM instructioin, he have sugeested good settings to get maximum battery life...........
Max 300 - MHz and Min 1200 Mhz...what is this!
Hi, I have a Samsung Galaxy S II I9100G and rooted it with Kernel superatoms v3.0 XXLA1 and installed SetCPU 2.3.0.2 in it.
Now, when I set the max and min slider to 1200 MHz (with Governer hotplug) and goes back to the home screen, after that, when I again open SetCPU, the max slider gets to 300 MHz and the min to 1200 MHz (with Governer powersave).
What is this, man!!! How can the processor run with maximum speed of 300 MHz and the minimum of 1200 MHz ....
Plzz...I need help
Hi,
I have a baili-mostlike.com/product/22.html M9701 and all over the internet and even in system info apps say that the max cpu speed is 1.2Ghz. I installed setcpu and voltage control and both have the max cpu speed to 1.2ghz but looking at the historical cpu speed state it never reach the 1.2Ghz and the max is 1008mhz.
How can I increase it?
Thanks
Since i've installed the new rom release 502 seems that CPU Z is reporting all cores to be stuck at a minimum of 800mhz per core. I could have tried in the past to change to noop and interact with CPU adjust. Now it doesnt work, i want the cores to sleep and keep one of them to 200mhz when full idle.
Any suggestions?
edit. http://www.phonearena.com/news/Andr...fficiency-improvements-to-the-Nexus-6_id67167
I'm using stock emui on android 4.4.2. I recently rooted my phone and noticed that the cpu frequencies are really weird. First of all all cpu over/underclocking apps showed max of 1.3 Ghz and min of 1.2 Ghz. Shouldn't max be 1.7 Ghz? Even more weird was i couldn't change the frequencies to anything else. I wanted to reduce the heat that 1.2 Ghz min frequency causes and thats why I rooted in first place. I managed to get frequencies stay by using Trickster mod's freq lock. But I'm still wondering if its normal for my phone to get hot and can I set max freq to 7.8 Ghz for gaming? And no, the power saving thing aka phone manager doesn't change anything else but increase battery life when I disable it.
That's for the A7 cluster. A15 cluster goes up to 1,7 GHz.
Tup3x said:
That's for the A7 cluster. A15 cluster goes up to 1,7 GHz.
Click to expand...
Click to collapse
I just noticed in another cpu tweaking app that it showed only some of cores can go up to 1.7 Ghz and other only to 1.3 Ghz. This furthermore confirms it that only half of cores are cabable of 1.7 Ghz. http://www.devicespecifications.com/en/model-cpu/6dee2d53
Too bad this info isn't almost anywhere at all.