Database Info

Which cpu freq are best?

Xperia X10 mini pro [MOD] FroyoComb v1.2
What is the best cpu frequency for stabile working, i use set cpu app for this.
I use 'coservative' scalling Min: 768 Mhz (when some problems i reduce to 748MHZ or 600Mhz when i dont need more performance) Max: 787 MHz or even 808 Mhz but this freq is too high. Is this scalling are good or use different (ondemand,performance)
Also i have question when my phone is blocked (screen is off) cpu freq back to normal low freq or still have the same freq like in set cpu app ?

No one can give specifics as even with one model of phone the quality of CPU changes so set frequencies differ.
EG: i'm using DHD with 1.6GHz OC "smartass" but some users top out on 1.3GHz, could OC more stable but don't need, regards underclock i've screen off "Powersave" lowest frequency 245MHz don't forget to set priority high.
There is more you can do with set CPU such as underclock on less battery so know get more for criticle phone usage, also temp based so again saving power.
Anyway best bet is to look for other users of x10 and see what they top etc.

Let's OC

It's time to Overclock our Phone...
DISCLAIMER: OVERCLOCK IS DANGEROUS FOR OUR PHONES
How to:
1. Now download r151 from Here
2. Put the files of r151 in the root of SD, run HARET.
3. Download SetCPU from Here and install It.
4. Now open SetCPU, And choice "Autodetect Speeds Reccomanded".
5. Allow Root.
6. Press Windows button and choice "Perflock Disabler" and "Attemp to Disable Perflock" and Check "Set on Boot".
7. Now, close the windows and OC our Phone.
My phone under USB and AC run at 825 MHz without Crash, i had tryed to run it at 864 MHz but System Crash everytime. Without USB and AC my phone run at 787 MHz. I Post 2 Images 1. = Normal Clock 2. = 825 MHz Clock.
To Made Benchmark i Use BenchmarkPi.
1. Screen Normal Clock
2. Screen 825MHz
For Other Question:
1. SetCPU
2. -r0bin-'s Post

I did it, it works perferctly !
Upscaled to 825 and min 128
Downscaled to 245 while charging and screen off
Thanks !

doublej4473 said:
I did it, it works perferctly !
Upscaled to 825 and min 128
Downscaled to 245 while charging and screen off
Thanks !
Click to expand...
Click to collapse
My Profiles:
1. Screen Off Min: 19 MHz Max: 245 MHz
2. In Call: Min: 128 MHz Max: 600 MHz
3. Charging AC: Min: 19 MHz Max: 825 MHz
4. Charging USb: Min: 19 MHz Max: 825 MHz
5. Main Profile: Min: 19 MHz Max: 787 MHz
...

Tell me please, does it helps to save the battery in last releace (r163)? I`m asking becouse i try to use Master CPU, and it seems to me that it don`t helps to save energy... But I don`t use profiles, only ondemand settings from 120-600 mHz.
Thanks!

@HTCxxxx
what is the percentage priority by profile?

puxus said:
Tell me please, does it helps to save the battery in last releace (r163)? I`m asking becouse i try to use Master CPU, and it seems to me that it don`t helps to save energy... But I don`t use profiles, only ondemand settings from 120-600 mHz.
Thanks!
Click to expand...
Click to collapse
To PowerSave try 19-480 MHz if Don't need Performance or 19-600 MHz Im Sorry But i Don't Know Master Cpu

doublej4473 said:
@HTCxxxx
what is the percentage priority by profile?
Click to expand...
Click to collapse
In Call is 100
And Screen Off 100 too.

19 Mhz does not work for me. Phone gets unusable slow and dont come back :/
Beside that, underclocking do not have a big influence on the battery consumtion.
Undervolting would be more interesting.

codiak said:
19 Mhz does not work for me. Phone gets unusable slow and dont come back :/
Beside that, underclocking do not have a big influence on the battery consumtion.
Undervolting would be more interesting.
Click to expand...
Click to collapse
Why Unusable??? Yhea, Undervolting can be an Interesting Thing, but i Think if the Volting is too low phone Freeze, and if is too high cpu can have an High temperature if you're stressing cpu and phone can freeze too. But i've noted, when i use a low "screen off" profile battery consumaption is high? why? is a problem of kernel? or is nomal?

codiak said:
19 Mhz does not work for me. Phone gets unusable slow and dont come back :/
Beside that, underclocking do not have a big influence on the battery consumtion.
Undervolting would be more interesting.
Click to expand...
Click to collapse
you are right,i also experienced that 19 Mhz makes phone lazy
i'm also agree about 2nd part..i read the same
HTCxxxx said:
Why Unusable??? Yhea, Undervolting can be an Interesting Thing, but i Think if the Volting is too low phone Freeze, and if is too high cpu can have an High temperature if you're stressing cpu and phone can freeze too. But i've noted, when i use a low "screen off" profile battery consumaption is high? why? is a problem of kernel? or is nomal?
Click to expand...
Click to collapse
you don't need to undervolt it too low,you just need to find the right voltage
try last kernel from r0bin and you will not have high battery consumption anymore

Low Mhz does not lead automaticly to low consumtion.
If you phone has something todo (update something for example) it will get the job done faster with high Mhz and is going fastert to sleep after that.
With low Mhz it takes longer and so can have higher consumtion.
On my HD2 I dont use profiles (like screen off) and it has a very low consumtion on standby/sleep.

If you set a minimum speed when screen is off a11 is not able to go to suspend, maybe

just a quick feedback on power consumption:
it never been so good with r167+drain fix without SetCPU
when I set profiles with low frequency (19 or 128Mhz) it keeps on consuming battery up to 100mA. when i switch SetCPU profiles off, i go to 9mA in suspend mode.
true story
there must be a way to setup SetCPU in a way it doesnt affect too much battery drain in suspend mode, but for the time being i just deactivated it.

tzacapaca said:
you are right,i also experienced that 19 Mhz makes phone lazy
i'm also agree about 2nd part..i read the same
you don't need to undervolt it too low,you just need to find the right voltage
try last kernel from r0bin and you will not have high battery consumption anymore
Click to expand...
Click to collapse
yes i see some improvement, and im happy for it...

(I THINK)
Hi All,
I've understood why CPU doesn't run @ 19MHz or @ 128 MHz...
Go to /sys/acpucloclock and look acpuclk_tbl...In It there are write all frequencies CPU can Run:
245760,400000,480000,600000,768000,787200,806400,825600,844800,864000....
but no Under 245 MHz so if You use a Profile for Screen off From 19MHz to 254MHz, cpu Run everytime @ 245MHz...so there is an high consummation of energy
bye

HTCxxxx said:
(I THINK)
Hi All,
I've understood why CPU doesn't run @ 19MHz or @ 128 MHz...
Go to /sys/acpucloclock and look acpuclk_tbl...In It there are write all frequencies CPU can Run:
245760,400000,480000,600000,768000,787200,806400,825600,844800,864000....
but no Under 245 MHz so if You use a Profile for Screen off From 19MHz to 254MHz, cpu Run everytime @ 245MHz...so there is an high consummation of energy
bye
Click to expand...
Click to collapse
hi
as codiak said earlier lowering CPU(underclocking) doesn't have so much impact on battery life..he also explained you why..if you want i will explain you too
explanation:run CPU at low voltage,open an app or downloading an email,etc= CPU will take time to get to the level app needs,display will stay longer while it CPU will get done the job= worse battery life
Undervolting will have impact on battery life
explanation:run same CPU clock at lower Voltage= CPU will use less power=better battery life
hope it's clear enough for you now,and if anyone else thinks i'm wrong feel free to prove me i'm wrong
P.S. Anyway i asked devs and they will lower CPU to run @ less than 245 Mhz.
Enjoy

tzacapaca said:
hi
as codiak said earlier lowering CPU(underclocking) doesn't have so much impact on battery life..he also explained you why..if you want i will explain you too
explanation:run CPU at low voltage,open an app or downloading an email,etc= CPU will take time to get to the level app needs,display will stay longer while it CPU will get done the job= worse battery life
Undervolting will have impact on battery life
explanation:run same CPU clock at lower Voltage= CPU will use less power=better battery life
hope it's clear enough for you now,and if anyone else thinks i'm wrong feel free to prove me i'm wrong
Click to expand...
Click to collapse
Ok thank you very much!!!

[Q] Recommended undervolt settings (Clemsyn-blades)

I tried to search but was unsuccessful to find the information that I wanted.
Can someone tell me what are the recommended safe undervolt settings for the transformer?
I'm running prime 1.9 with clemsyn-blades 1.6a.
Thx
Sent from my Transformer TF101 using Tapatalk

steve.garon said:
I tried to search but was unsuccessful to find the information that I wanted.
Can someone tell me what are the recommended safe undervolt settings for the transformer?
I'm running prime 1.9 with clemsyn-blades 1.6a.
Thx
Sent from my Transformer TF101 using Tapatalk
Click to expand...
Click to collapse
I don't know what the stock settings are but I can tell you the process I followed when I OCed my tablet. Install the custom kernel and rom you want. Then install an app to modify frequency and voltages. I use setCPU but pimpmycpu works also.
1. Find the highest clock you can attain with the provided overvolt from the kernel. To do this just start at the highest frequency and see if the tablet reboots or locks during a stress test. Some people play games to stress. I use the built in stress tester in SetCPU. Make sure to apply the higher frequency for testing but not to apply settings on reboot or you could get stuck in a reboot loop (or so I am assuming the kernel might reset to 1 GHz when a hard lock occurs).
2. Once you have the maximum Frequency (for me it was 1.644 MHz) then start lowering the voltage for that frequency only until you loose stability. I can undervolt 1.644 by -75 mV. If I go upto -100 then I get random reboots. I go in -25 mV increments but you could narrow it down even more by going with -10 or even -5 intervals.
3. Take the offset you got (in my case -75 mV)on the highest frequency and apply it to every frequency above 1 GHz and see if this is stable. If not then slowely increase voltage until you gain stability again.
4. (Optional) Then start undervolting stock frequencies from 216 MHz to 1 GHz. Every tablet is different but (I have heard) this could cause sleep issues. I undervolted all frequencies from above 216 to 1000 GHz by -25 Mv without any issues. I may bring it down slowely by increments of-5 or -10 until I run into some issues.
5. (Optional) Undervolt 216 MHz as low as possible to save standby battery power. I undervolted my 216 MHz to 725 mV (even though SetCPu goes lower the kernel is locked at this). Which helps keep my battery levels up when the tablet screen is off and not in use.
Hints: To test that a voltage is okay at a certain frequency then make sure to set your max to the frequency level you want to test. If you set the max at 1544 and undervolt 1 GHz you will never know if it is okay because when you stress it it will blow right past 1 GHz upto 1544 and the voltage for that will take over.
If you have any questions please let me know.

Bjd223 said:
I don't know what the stock settings are but I can tell you the process I followed when I OCed my tablet. Install the custom kernel and rom you want. Then install an app to modify frequency and voltages. I use setCPU but pimpmycpu works also.
1. Find the highest clock you can attain with the provided overvolt from the kernel. To do this just start at the highest frequency and see if the tablet reboots or locks during a stress test. Some people play games to stress. I use the built in stress tester in SetCPU. Make sure to apply the higher frequency for testing but not to apply settings on reboot or you could get stuck in a reboot loop (or so I am assuming the kernel might reset to 1 GHz when a hard lock occurs).
2. Once you have the maximum Frequency (for me it was 1.644 MHz) then start lowering the voltage for that frequency only until you loose stability. I can undervolt 1.644 by -75 mV. If I go upto -100 then I get random reboots. I go in -25 mV increments but you could narrow it down even more by going with -10 or even -5 intervals.
3. Take the offset you got (in my case -75 mV)on the highest frequency and apply it to every frequency above 1 GHz and see if this is stable. If not then slowely increase voltage until you gain stability again.
4. (Optional) Then start undervolting stock frequencies from 216 MHz to 1 GHz. Every tablet is different but (I have heard) this could cause sleep issues. I undervolted all frequencies from above 216 to 1000 GHz by -25 Mv without any issues. I may bring it down slowely by increments of-5 or -10 until I run into some issues.
5. (Optional) Undervolt 216 MHz as low as possible to save standby battery power. I undervolted my 216 MHz to 725 mV (even though SetCPu goes lower the kernel is locked at this). Which helps keep my battery levels up when the tablet screen is off and not in use.
Hints: To test that a voltage is okay at a certain frequency then make sure to set your max to the frequency level you want to test. If you set the max at 1544 and undervolt 1 GHz you will never know if it is okay because when you stress it it will blow right past 1 GHz upto 1544 and the voltage for that will take over.
If you have any questions please let me know.
Click to expand...
Click to collapse
Cool. I'll give this a try.
Sent from my Nexus S using Tapatalk

I get a stable undervolt at -50 on all cpu steps which is pretty good. This should save loads of battery.
Sent from my Nexus S using Tapatalk

steve.garon said:
I get a stable undervolt at -50 on all cpu steps which is pretty good. This should save loads of battery.
Sent from my Nexus S using Tapatalk
Click to expand...
Click to collapse
I started at the top and went down every stepping from 1624 to 1000 and found out the lowest stable frequency and then added 10 to be safe to each one. I am currently at
1624 (-70)
1592 (-80)
1544 (-180)
1472 (-80)
1424 (-160)
1336 (-185)
1232 (-185)
1000 (- 110) which is 990 mV
I then set every stepping under 1 GHz frequency that was above 990 mV to 990 mV as if it can run at 1 GHz at that voltage then any speed under that will run fine at that voltage also. I have some more stability testing to do but I think I got it pretty much nailed down for my device. I may go through all the sub 1 GHz frequencies but it does take some time to run a stress test under each stepping.
Also I have never had any sleep issues but that is something to look out for. I also wonder how temperature affects stability as I have never gotten it above 40c. The pad might benefit from a 1 or 2mm thermal pad squeezed between the CPU and the back bezel (if it will fit).
Does anyone know that tjunction max for a Tegra2? I have a profile set up in SetCPU that sets the CPU frequency at 1 GHz if the CPU gets above 42 because I saw something similar in the Clemsyn rom but don't really know when the CPU will start to throttle itself at or shut off.
I am trying to find stock voltages for different devices because it seems like some mfgs are undervolting to save battery on some tablets.

Bjd223 said:
I started at the top and went down every stepping from 1624 to 1000 and found out the lowest stable frequency and then added 10 to be safe to each one. I am currently at
1624 (-70)
1592 (-80)
1544 (-180)
1472 (-80)
1424 (-160)
1336 (-185)
1232 (-185)
1000 (- 110) which is 990 mV
I then set every stepping under 1 GHz frequency that was above 990 mV to 990 mV as if it can run at 1 GHz at that voltage then any speed under that will run fine at that voltage also. I have some more stability testing to do but I think I got it pretty much nailed down for my device. I may go through all the sub 1 GHz frequencies but it does take some time to run a stress test under each stepping.
Also I have never had any sleep issues but that is something to look out for. I also wonder how temperature affects stability as I have never gotten it above 40c. The pad might benefit from a 1 or 2mm thermal pad squeezed between the CPU and the back bezel (if it will fit).
Does anyone know that tjunction max for a Tegra2? I have a profile set up in SetCPU that sets the CPU frequency at 1 GHz if the CPU gets above 42 because I saw something similar in the Clemsyn rom but don't really know when the CPU will start to throttle itself at or shut off.
I am trying to find stock voltages for different devices because it seems like some mfgs are undervolting to save battery on some tablets.
Click to expand...
Click to collapse
-180 in some frequencies!! Thats just insane. I've got to try this.
FYI, you don't have to lower voltage for all upper 1ghz frequencies. If your running at 1544 for exemple. The cpu will never touch the frequencies between 1000 and 1544. After the 1000 its a direct step to whatever frequency your overclocking too. You can monitor this in setcpu.
I cannot undervolt as precise as you can. For some reason setcpu only let me do 25mv increment...
Sent from my Nexus S using Tapatalk

I have undervolted by -175 on all frequencies, obviously 216Mhz is locked but all seems pretty stable after some testing. No sleep death either so I'm going to carry on testing.

steve.garon said:
-180 in some frequencies!! Thats just insane. I've got to try this.
FYI, you don't have to lower voltage for all upper 1ghz frequencies. If your running at 1544 for exemple. The cpu will never touch the frequencies between 1000 and 1544. After the 1000 its a direct step to whatever frequency your overclocking too. You can monitor this in setcpu.
I cannot undervolt as precise as you can. For some reason setcpu only let me do 25mv increment...
Sent from my Nexus S using Tapatalk
Click to expand...
Click to collapse
In SetCPU do not use the slider use the keyboard and type in the exact number you want.
I wanted to figure out every stepping in case I wanted to switch to a lower frequency but yeah most poeple don't have to do this.
The lowest stable I have gotten is -190 but feel like adding 10 padding will ensure stability.
I will probably do the sub 1 GHz frequencies today or tomorrow.

Bjd223 said:
In SetCPU do not use the slider use the keyboard and type in the exact number you want.
I wanted to figure out every stepping in case I wanted to switch to a lower frequency but yeah most poeple don't have to do this.
The lowest stable I have gotten is -190 but feel like adding 10 padding will ensure stability.
I will probably do the sub 1 GHz frequencies today or tomorrow.
Click to expand...
Click to collapse
I didnt even noticed I could use the keyboard...
I finally settled to -25 @216, -50 under 612 and -100 over 612. And everything is stable
Sent from my Nexus S using Tapatalk

I have tested each voltage. I am under the impression that 725 mV is the kernel minimum in the Clemsyn kernel so once I hit that I just set every frequency under that too 725. I will eventually go through and stress test every frequency @ 725 to make sure everything is a-okay but I am sure it is.
Here is my list incase anyone wants a place to start.
1680 MHz (-000) I can not overclock to this freuqency.
1624 MHz (-070) 1380 mV
1592 MHz (-080) 1345 mV
1544 MHz (-180) 1220 mV
1472 MHz (-080) 1220 mV
1424 MHz (-160) 1115 mV
1336 MHz (-185) 1065 mV
1232 MHz (-185) 990 mV
1000 MHz (-215) 885 mV
0912 MHz (-215) 835 mV
0816 MHz (-235) 790 mV
0760 MHz (-215) 760 mV
0608 MHz (-225) 725 mV
0456 MHz (-100) 725 mV
0312 MHz (-075) 725 mV
0216 MHz (-025) 725 mV
Clemsyn said the minimum mV in his kernel but I can't seem to find the thread, but I think it was 725. If I find out it is something lower I will go through the lower ones until I hit the minimum.
Also please note that everything above 1 GHz has +10 mV padding added to it above the lowest stable I could find. Everything below 1 GHz only has a +5 mV padding on it. So for example I actually hit a -240 w/o any issues @ 816 MHz.
I tested in +/-5 mV increments but if you wanted you could narrow it down even further.
EDIT: Also after some testing it looks like it does use frequencies between 1 GHz and your max. I have it set to 1644 and it does hit 1232 MHz occasionally.

Bjd223 said:
I don't know what the stock settings are but I can tell you the process I followed when I OCed my tablet. Install the custom kernel and rom you want. Then install an app to modify frequency and voltages. I use setCPU but pimpmycpu works also.
1. Find the highest clock you can attain with the provided overvolt from the kernel. To do this just start at the highest frequency and see if the tablet reboots or locks during a stress test. Some people play games to stress. I use the built in stress tester in SetCPU. Make sure to apply the higher frequency for testing but not to apply settings on reboot or you could get stuck in a reboot loop (or so I am assuming the kernel might reset to 1 GHz when a hard lock occurs).
2. Once you have the maximum Frequency (for me it was 1.644 MHz) then start lowering the voltage for that frequency only until you loose stability. I can undervolt 1.644 by -75 mV. If I go upto -100 then I get random reboots. I go in -25 mV increments but you could narrow it down even more by going with -10 or even -5 intervals.
3. Take the offset you got (in my case -75 mV)on the highest frequency and apply it to every frequency above 1 GHz and see if this is stable. If not then slowely increase voltage until you gain stability again.
4. (Optional) Then start undervolting stock frequencies from 216 MHz to 1 GHz. Every tablet is different but (I have heard) this could cause sleep issues. I undervolted all frequencies from above 216 to 1000 GHz by -25 Mv without any issues. I may bring it down slowely by increments of-5 or -10 until I run into some issues.
5. (Optional) Undervolt 216 MHz as low as possible to save standby battery power. I undervolted my 216 MHz to 725 mV (even though SetCPu goes lower the kernel is locked at this). Which helps keep my battery levels up when the tablet screen is off and not in use.
Hints: To test that a voltage is okay at a certain frequency then make sure to set your max to the frequency level you want to test. If you set the max at 1544 and undervolt 1 GHz you will never know if it is okay because when you stress it it will blow right past 1 GHz upto 1544 and the voltage for that will take over.
If you have any questions please let me know.
Click to expand...
Click to collapse
Thanks for this mate. I followed your guide exactly and I'm using clems 16? Kernel completely stable at all frequencies including the undervolting!

Based on my testing you need ~ a +15 to +25 mV over stable CPU voltage to get stable 3D GPU.
I found that I could run hours of "Stress CPU" without any issues at a voltage but during stressful 3D games that are using CPU + GPU cores, at that same frequency, the machine would FC the app, reboot or lock. I have also noticed that the closer you are to the stable voltage different things will happen.
Far off - machine will usually reboot
Closer - machine will usually hard lock
Even closer - Apps will FC, widgets will act strange (like invert colors, black blocks for backgrounds, etc.)
So what I do now is I test with Dungeon Defenders at the main menu. Its seems that if you can last 1 hr at the Dungeon Defenders menu you are GTG. If you actually play the game then 1 stage is what I use to test.

Bjd223 said:
I don't know what the stock settings are but I can tell you the process I followed when I OCed my tablet. Install the custom kernel and rom you want. Then install an app to modify frequency and voltages. I use setCPU but pimpmycpu works also.
1. Find the highest clock you can attain with the provided overvolt from the kernel. To do this just start at the highest frequency and see if the tablet reboots or locks during a stress test. Some people play games to stress. I use the built in stress tester in SetCPU. Make sure to apply the higher frequency for testing but not to apply settings on reboot or you could get stuck in a reboot loop (or so I am assuming the kernel might reset to 1 GHz when a hard lock occurs).
2. Once you have the maximum Frequency (for me it was 1.644 MHz) then start lowering the voltage for that frequency only until you loose stability. I can undervolt 1.644 by -75 mV. If I go upto -100 then I get random reboots. I go in -25 mV increments but you could narrow it down even more by going with -10 or even -5 intervals.
3. Take the offset you got (in my case -75 mV)on the highest frequency and apply it to every frequency above 1 GHz and see if this is stable. If not then slowely increase voltage until you gain stability again.
4. (Optional) Then start undervolting stock frequencies from 216 MHz to 1 GHz. Every tablet is different but (I have heard) this could cause sleep issues. I undervolted all frequencies from above 216 to 1000 GHz by -25 Mv without any issues. I may bring it down slowely by increments of-5 or -10 until I run into some issues.
5. (Optional) Undervolt 216 MHz as low as possible to save standby battery power. I undervolted my 216 MHz to 725 mV (even though SetCPu goes lower the kernel is locked at this). Which helps keep my battery levels up when the tablet screen is off and not in use.
Hints: To test that a voltage is okay at a certain frequency then make sure to set your max to the frequency level you want to test. If you set the max at 1544 and undervolt 1 GHz you will never know if it is okay because when you stress it it will blow right past 1 GHz upto 1544 and the voltage for that will take over.
If you have any questions please let me know.
Click to expand...
Click to collapse
I always wanted to learn more about the mV and CPU speed stuff. I always install rom, install kernel of the one I heard the better is and that's it. Never had touched the voltage measure in any of my android device. Yeah i know, so noob.
Thanks for this how to info, I think I will play around a bit later. Right now I'm struggling with my self on wish of the 3 roms available install and stay.

Had to remove undervolt this weekend since my camera wouldnt start anymore. I'll have to redo all the tests I was doing but test for camera too. The tablet would just freeze as soon as I opened the camera app
Sent from my Nexus S using Tapatalk

steve.garon said:
Had to remove undervolt this weekend since my camera wouldnt start anymore. I'll have to redo all the tests I was doing but test for camera too. The tablet would just freeze as soon as I opened the camera app
Sent from my Nexus S using Tapatalk
Click to expand...
Click to collapse
My camera does not work either. I just figured it was Clemsyns kernel not the OC. I don't know anything about cameras but maybe they use a lot of voltage so the voltage to the CPU dips.
I never used the camera personally, but I will test it some and see what additional mV you need over stable to get the camera working.
Also I noticed the more you undervolt (it seems to me) the harder it is to undock with an app open. usually instead of reloading they FC or lock the device so i just make sure to hit the home key before I undock then alt tab right back into the app.

Bjd223 said:
My camera does not work either. I just figured it was Clemsyns kernel not the OC. I don't know anything about cameras but maybe they use a lot of voltage so the voltage to the CPU dips.
I never used the camera personally, but I will test it some and see what additional mV you need over stable to get the camera working.
Also I noticed the more you undervolt (it seems to me) the harder it is to undock with an app open. usually instead of reloading they FC or lock the device so i just make sure to hit the home key before I undock then alt tab right back into the app.
Click to expand...
Click to collapse
My camera did not work at 912 MHz at stock voltage on 17b but now on 18 I can do my normal undervolt settings and the camera works fine.

[Q] Overlocking Values in SetCPU?

I have at max: 1200 MHz ,at min 83 and in typeerformance, are these values corecct or wrong for a custom rom?
-Greeting-
PD:Andro's Rom (3 days for release)

Yes, or no, because you need a screen off profile or your battery life will be damn short.

I think this should be in the general section and i recommend using the conservative governor over the performance since conservative goes to the minimum frequency when phone is not being used i.e. when screen is off. This is best for performance since it automatically goes to the maximum frequency when screen is on and when screen is off it goes to the minimum which is good for battery.

1200 is too high....
It will damage your battery....
I use 100 MHz to 800 MHz....
Its average and most of the users use the same....

[email protected] said:
1200 is too high....
It will damage your battery....
I use 100 MHz to 800 MHz....
Its average and most of the users use the same....
Click to expand...
Click to collapse
I think that is a very wise thing to do. I shall see how my phone runs at that speed.

Oks.thx.
Now:
MAX:800
MIN:83
Type: Conservative.
Are these values correctly now?
-Greettings-

AndroKite said:
Oks.thx.
Now:
MAX:800
MIN:83
Type: Conservative.
Are these values correctly now?
-Greettings-
Click to expand...
Click to collapse
Yeah its good.... ^_^
Happy to help..... ^_^

My batery temp is 27º - 28º celcius,is a good temp or maybe it can be danger for my battery?
-Grettings-

AndroKite said:
My batery temp is 27º - 28º celcius,is a good temp or maybe it can be danger for my battery?
-Grettings-
Click to expand...
Click to collapse
Aslong as its not 35+ degrees you are ok
Sent from my GT-I5800 using XDA App

Lol! Did you make a mistake by posting this question in the development section? Suppose to put at general section.
Accidentally sent from my ultra speedy SG3 phone using tapatalk.
P.S If my post have helped you, don't feel shy to click the thanks button

That frecuency will eat your battery.
I use my SetCPU at frecuencies 400-800Mhz, and use profiles for screen off (83-400Mhz), battery <20% (200-600Mhz), time (2am-6am) (83-83Mhz powersave)
always on demand (except time profile)
Greetings

My config is
Main 400-800 Mhz Ondemand Set on boot
Profiles
Temp >45°C 200-500 Mhz priority 100 Ondemand
time 2am-6am 83-83 Mhz priority 95 powesave
screen off 83-500 Mhz priority 90 Ondemand
Battery <20% 200-600 Mhz priority 80 Ondemand
I have g3mod 2.0 OC kernel
Greetings

I just use basic settings, no profiles or anything. Look in my signature.
I may add a few profiles after my lil bro is finished playing games on my phone.

My battery temp is 39 degrees Celsius is it that a good tempeture?

anything between 83 and 800 would work like charm and enough for day to day tasks..use conservative governor..set profile for screen off and on call..

SetCPU settings

Hey guys, I wanted to make this thread now that we have root! Currently I have the following profiles, lets see how they work over the next few days
Main: 1458 max, 384 min
Battery < 50% - 1242 max, 810 min
Screen off - 810 max, 486 min
Both on demand.
What about you guys?

CollegeProfesor said:
Hey guys, I wanted to make this thread now that we have root! Currently I have the following profiles, lets see how they work over the next few days
Main: 1458 max, 384 min (is 384 too low? It was the default setting)
Battery < 50% - 1242 max, 810 min
Screen off - 810 max, 486 min
Both on demand.
What about you guys?
Click to expand...
Click to collapse
I'm running a little lower. ~1110 max, 384 min
Screen off - ~500, 384 min.
Both on powersave. Getting weird results however.

What type of results?

powersave doesnt work,. use on demand,
left it on power save at 1300, the cpu was running at 1500, changed it to ondemand , looks like its working