[I9001][Official FW] I9001XXKQE (11 May 2012) Austria Unbranded - Galaxy S Plus I9001 Android Development

New firmware for the I9001 is out.
I9001XXKQE
Changelist: 1102220
Origin: Austria (Unbranded)
Added: 2012-05-11 11:23:02
Model: GT-I9001
Product Code: GT-I9001HKDATO
Modified: 2012-05-04
HIDSWVER: I9001XXKQE/I9001ATOKP3/I9001XXKPL/I9001XXKQE
Filename: GT-I9001_ATO_1_20120504191303_jixw3rxxuz.zip.enc2
CRC: 547029094
Included languages:
Czech
Dutch
English
German
Greek
French
Hungarian
Italian
Korean
Polish
Spanish
Slovakian
Turkish
Included CSC:
ATO
Download instructions:
Get it using Checkfus.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1. Select Android - GT-I9001 - Austria
2. Click on 'Check Firmware'
3. Click 'Download'
Flashing instructions:
1. Download firmware. (Checkfus for high speed directly from Samsung)
2. Unpack the archive. You will get a .tar.md5 file.
3. Install usb drivers. Reboot computer.
4. Put your phone into download mode.
(hold volume down+home+power buttons until you see a download message)
5. Plug in your phone to your pc. Wait for windows to install drivers.
6. Download and extract Odin 4.43 with AriesVE.ops.
7. Run Odin. Click on OPS and select the AriesVE.ops file. Then click on 'One Package' and select the .tar.md5 file.
7. Click Start.
8. Done.
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=GINGERBREAD
ro.build.display.id=GINGERBREAD.XXKQE
ro.build.version.incremental=XXKQE
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.6
ro.build.date=Tue Apr 24 20:37:35 KST 2012
ro.build.date.utc=1335267455
ro.build.type=user
ro.build.user=dpi
ro.build.host=DELL127
ro.build.tags=release-keys
ro.product.model=GT-I9001
ro.product.brand=samsung
ro.product.name=GT-I9001
ro.product.device=GT-I9001
ro.product.board=GT-I9001
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=msm7k
# ro.build.product is obsolete; use ro.product.device
ro.build.product=GT-I9001
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=GT-I9001-user 2.3.6 GINGERBREAD XXKQE release-keys
ro.build.fingerprint=samsung/GT-I9001/GT-I9001:2.3.6/GINGERBREAD/XXKQE:user/release-keys
# Samsung Specific Properties
ro.build.PDA=I9001XXKQE
ro.build.hidden_ver=I9001XXKQE
ro.build.changelist=1102220
ro.flash.resolution=720
# end build properties
#
# system.prop for surf
#
rild.libpath=/system/lib/libsec-ril.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
DEVICE_PROVISIONED=1
debug.sf.hw=1
dalvik.vm.heapsize=64m
ro.sf.lcd_density=240
ro.dev.dmm=1
dev.dmm.dpd.trigger_delay=30
#
# system props for the cne module
#
persist.cne.UseCne=vendor
persist.cne.bat.range.low.med=30
persist.cne.bat.range.med.high=60
persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml
persist.cne.loc.policy.user=/system/etc/UserPolicy.xml
persist.cne.bwbased.rat.sel=false
persist.cne.snsr.based.rat.mgt=false
persist.cne.bat.based.rat.mgt=false
persist.cne.rat.acq.time.out=30000
persist.cne.rat.acq.retry.tout=0
#
lpa.decode=false
ro.hdmi.enable=true
#
# system props for the data modules
#
ro.use_data_netmgrd=true
#
# system props for SD card emulation of emmc partition
#
ro.emmc.sdcard.partition=16
#
# system props for telephony modules
#
#device supports EHRPD
ro.config.ehrpd=true
#
# system props for the MM modules
#
media.stagefright.enable-player=true
media.stagefright.enable-meta=false
media.stagefright.enable-scan=false
media.stagefright.enable-http=true
#
# system prop for opengles version
#
ro.opengles.version=131072
# Samsung USB default mode
persist.service.usb.setting=0
#
#System property for qemu
#
ro.kernel.qemu=0
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.opengles.version=131072
ro.config.ringtone=01_Minimal_tone.ogg
ro.config.notification_sound=01_Sherbet.ogg
ro.config.alarm_alert=Good_Morning.ogg
wifi.interface=eth0
wifi.supplicant_scan_interval=15
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=false
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
media.stagefright.enable-player=1
media.stagefright.enable-meta=false
media.stagefright.enable-scan=false
media.stagefright.enable-http=true
media.stagefright.enable-rtsp=false
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.locationfeatures=1
ro.setupwizard.mode=DISABLED
ro.com.google.clientidbase=android-samsung
ro.com.google.gmsversion=2.3_r10
ro.com.google.clientidbase=android-samsung
ro.secdevenc=true
ro.error.receiver.default=com.samsung.receiver.error
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt

Thanks, succesfully downloaded! I'll check it later today when I get back home. If anyone needs it mirrored somewhere, just ask, I'll upload it some time in the afternoon.

Interesting...i'm dowloading to see what has changed. Wonder if this is updated version of KQB.
I've never seen that "Check FUS"...what's story behind it???

Anyone knows how to root this firmware?
Doomlord's rooting toolkit and superoneclick dont work.

root your phone with this guide
http://forum.xda-developers.com/showthread.php?t=1253707

Anybody tried? Any Changes?

mhm
on http://samfirmware.com/ the xxxKQE is not listed and my antivir give me a alarm for "checkfus"

Mirror is in 10 min ready!

texten said:
mhm
on http://samfirmware.com/ the xxxKQE is not listed and my antivir give me a alarm for "checkfus"
Click to expand...
Click to collapse
CheckFus is Clean. I scanned Eset & Kaspersky. And you can see this firmware here:
http://samsung-updates.com/device/?id=GT-I9001
And. Texten may be you can make final with it )
You can Directly Download from http://samsung-updates.com/fw/Samsung-Updates.com-GT-I9001_ATO_1_20120504191303_jixw3rxxuz.zip
Regards

Checkfus has been with Samsung androids since the dawn of time.
It's not a virus.
You can check out the web version here to receive quick info on all Samsung products.

victorator said:
Checkfus has been with Samsung androids since the dawn of time.
It's not a virus.
You can check out the web version here to receive quick info on all Samsung products.
Click to expand...
Click to collapse
ok, i will download it

Blumdum said:
root your phone with this guide
http://forum.xda-developers.com/showthread.php?t=1253707
Click to expand...
Click to collapse
thank you that worked!
---------- Post added at 02:55 PM ---------- Previous post was at 02:54 PM ----------
texten said:
mhm
on http://samfirmware.com/ the xxxKQE is not listed and my antivir give me a alarm for "checkfus"
Click to expand...
Click to collapse
Better use the:
http://twitter.com/#!/SamFirmware
http://twitter.com/#!/samkiesupdates
www.sammobile.com
They are basically the old samfirmware team.
And if you check the samkiesupdate twitter you'll see the firmware listed!

Here is a Mirror:
http://uploaded.to/file/nelwn1wp

I installed this FW. TW has same bug as KQB. After restart, icons in bottom part of screen (phone, contacts, messaging, applications) being restored to default. For WiFi, I don't know yet because i encountered WiFi bug only on N networks. Currently I'm in office and use B/G network. Anyway, it's very fast rom.

Samsung repaired our KQB?

viktorlj said:
I installed this FW. TW has same bug as KQB. After restart, icons in bottom part of screen (phone, contacts, messaging, applications) being restored to default. For WiFi, I don'y know yet because i encountered WiFi bug only on N networks. Currently I'm in office and use B/G network. Anyway, it's very fast rom.
Click to expand...
Click to collapse
I can confirm the bug as well.
On the other hand the widget bug (where the screen remained in the edit mode) has been fixed.

viktorlj said:
I installed this FW. TW has same bug as KQB. After restart, icons in bottom part of screen (phone, contacts, messaging, applications) being restored to default. For WiFi, I don'y know yet because i encountered WiFi bug only on N networks. Currently I'm in office and use B/G network. Anyway, it's very fast rom.
Click to expand...
Click to collapse
is the icon placement storage in tw4 app drawer working?

I'm not shure that I understand your question Texten. Tell me what do you want me to test.

Does at least one samsung dev employee read this pages? This is terrible... we are screaming in the dark empty tunnel...

viktorlj said:
I'm not shore that I understand your question Texten. Tell me what do you want me to test.
Click to expand...
Click to collapse
try to place a app on a new page in the app drawer and then make a reboot. after that look into the app drawer whether this icon is still at the place you have set it
thank you

Related

[FIRMWARE]OTA_EVITA_UL_ICS_40_S_Cingular_US_2.20.502.7-1.85.502.3_R2_releasenin45grzk

Developers only
This is AT&T OTA update from 1.85 to 2.20
Full dump will be up late tonight (I hope)
Hit thanks button
(277Mb)
md5: 39FEB0267D8EE137C328A9C8D1BE1E19
OTA_EVITA_UL_ICS_40_S_Cingular_US_2.20.502.7-1.85.502.3_R2_releasenin45grzkfswb95v.zip
All in one (firmware+Patched System dump)
http://db.tt/kVelsDil
md5: 37548960DE0E3A30FD518B2C922B230D
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I saved the zip.Will run update quick and upload everything
Hell yes,Im in matrix lol
Everything went smooth
excellent; just tried downloading it myself using a fresh 1.85 ruu install... but it know's im not in the USA (even using a vpn/proxy to a buddy of mine in philly). lol
JSLEnterprises said:
excellent; just tried downloading it myself using a fresh 1.85 ruu install... but it know's im not in the USA (even using a vpn/proxy to a buddy of mine in philly). lol
Click to expand...
Click to collapse
how about this http://forum.xda-developers.com/showpost.php?p=29713041&postcount=1
With our s-on situation ota is good for radio,boot image.Patching all those files without user error almost impossible
Everything went smooth,I will upload full dump late tonight
Crappyvate said:
how about this http://forum.xda-developers.com/showpost.php?p=29713041&postcount=1
Click to expand...
Click to collapse
I think i should venture into General a bit more often I guess.
nice will this help as a 4.0.4 kernel so that aosp and cm roms will have their bugs cleared easily?
JSLEnterprises said:
I think i should venture into General a bit more often I guess.
Click to expand...
Click to collapse
yeah,its crazy.Some people post minor mods in upgrade section,some firmwares in general section lol
patched ruu almost ready.Will test it in the kitchen and upload
So this has been verified and tested SAFE to flash over any of the ROMs out and about right now?
All I want to do is get the 2.20 AT&T firmware on there with the corresponding Radio and HBOOT, make a full nandroid backup of it 100% stock and rooted, and then install TN SE 1.6b right back over it.
This will work no issues right?
Also, on a side-note
Does the Zip in the OP have an updated AT&T radio in it? And an updated hboot?
These are really the only things I'm worried about.
jakew02 said:
So this has been verified and tested SAFE to flash over any of the ROMs out and about right now?
All I want to do is get the 2.20 AT&T firmware on there with the corresponding Radio and HBOOT, make a full nandroid backup of it 100% stock and rooted, and then install TN SE 1.6b right back over it.
This will work no issues right?
Also, on a side-note
Does the Zip in the OP have an updated AT&T radio in it? And an updated hboot?
These are really the only things I'm worried about.
Click to expand...
Click to collapse
Its untouched by human hand HTC-Signed zip.
firmaware.zip inside is what you really need
I think you can use it to update firmware as PJ83IMG.zip (with all revert to stock dance) and then flash custom ROM
I'll patch this bad boy up
Sent from my HTC One XL using Tapatalk 2
saketh91 said:
nice will this help as a 4.0.4 kernel so that aosp and cm roms will have their bugs cleared easily?
Click to expand...
Click to collapse
Nope. Not until HTC release the kernel code. Which they have not done yet.
vin255764 said:
Its untouched by human hand HTC-Signed zip.
firmaware.zip inside is what you really need
I think you can use it to update firmware as PJ83IMG.zip (with all revert to stock dance) and then flash custom ROM
Click to expand...
Click to collapse
hm, alright
I'm just weary to download anything right now if it isn't exactly what i'm looking for. At my parents house in Virgina, they live on a newly developed neighborhood, and somehow @^$%^# Verizon hasn't gotten FIOS down the freakin road yet, so they've got the old AT&T wireless broadband modem, and that shizzz only has 5GB / month with a $10/1GB overage. NOT cheap.. and I've already ran my own personal att account " 7 x 1GB Overage Plan".. FML right?
sbryan12144 said:
I'll patch this bad boy up
Sent from my HTC One XL using Tapatalk 2
Click to expand...
Click to collapse
Done yet?
Haha!
scrosler said:
Done yet?
Haha!
Click to expand...
Click to collapse
scott you crackarom-aholic
On a side not has anyone found any changes not in the asia rom?
done,willtry to upload to dropbox
I'm completely stock right now.. What will happen if i update it using the setting "search for update option" ??
build.prop
Code:
ro.ril.oem.ecclist=911
ro.ril.enable.a52=0
ro.ril.enable.a53=1
ro.ril.enable.dtm=0
ro.ril.gprsclass=10
ro.ril.hsdpa.category=14
ro.ril.hsupa.category=6
ro.ril.hsxpa=4
ro.ril.def.agps.mode=1
ro.ril.fast.dormancy.rule=2
ro.ril.att.feature=1
ro.ril.radio.svn=5
ro.ril.disable.fd.plmn.prefix=23402,23410,23411,23420,27202
ro.ril.enable.sdr=0
ro.ril.enable.gea3=1
ro.ril.enable.ucsq=2
ro.ril.set.mtusize=1410
ro.ril.enable.r8fd=0
ro.ril.disable.cpc=1
persist.pdn.profile=phone
ro.ril.multirab.throttling=1
ro.com.google.clientidbase=android-htc
ro.com.google.clientidbase.yt=android-htc
ro.com.google.clientidbase.am=android-att-us
ro.com.google.clientidbase.gmm=android-htc
ro.com.google.clientidbase.ms=android-att-us
ro.telephony.default_network=9
ro.product.model=HTC One X
ro.monkey=0
ro.sllowmock.location=0
ro.ril.ciq=0
ro.da1.enable=true
ro.watch.appid=com.sdgtl.watch.evaul_40_ics_s
ro.ril.enable.pre_r8fd=1
ro.ril.fd.pre_r8_tout.scr_off=3
ro.ril.fd.pre_r8_tout.scr_on=0
ro.ril.fd.r8_tout.scr_off=0
ro.ril.fd.r8_tout.scr_on=0
ro.ril.ltefgi=1577974912
CMSUPPORT=0
dev.defaultwallpaper=/system/customize/resource/scene_wallpaper_htc_default.jpg
dev.deviceimage_large=/system/customize/resource/evita-att_187x370.png
dev.deviceimage_small=/system/customize/resource/evita-att32x58.png
# begin build properties
# autogenerated by buildinfo.sh
ro.aa.project=EVITA_UL_ICS_40_S
ro.aa.romver=2.20.502.7
ro.aa.maincid=CWS__001
ro.aa.modelid=PJ8310000
ro.aa.cidlist=CWS__001
ro.aa.rid=44
ro.aa.customizationid=400676
ro.aa.taskid=271860
ro.aa.skulist=502
ro.aa.mainsku=502
ro.onecid=
ro.aa.report=com
ro.cwkey=CWS__001
ro.com.google.clientidbase=android-htc
ro.build.id=IMM76D
ro.build.display.id=IMM76D
ro.build.version.incremental=79936.7
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.4
ro.build.date=六 7月 14 12:17:04 CST 2012
ro.build.date.utc=1342239424
ro.build.type=user
ro.build.user=
ro.build.host=ABM009
ro.build.tags=release-keys
ro.product.model=htc_evita
ro.product.brand=cingular_us
ro.product.name=evita
ro.product.device=evita
ro.product.board=MSM8960
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=HTC
ro.product.locale.language=xhdpi
ro.wifi.channels=
ro.board.platform=msm8960
# ro.build.product is obsolete; use ro.product.device
ro.build.product=evita
# Do not try to p**** ro.build.description or .fingerprint
ro.build.description=2.20.502.7 CL79936 release-keys
ro.build.description=2.20.502.7 CL79936 release-keys
ro.build.changelist=79936
ro.build.fingerprint=cingular_us/evita/evita:4.0.4/IMM76D/79936.7:user/release-keys
ro.build.characteristics=default
ro.build.project=EVITA_UL_ICS_40_S:271860
ro.product.version=2.20.502.7 710RD
ro.build.languageremove=0
ro.build.sense.version=4.0
keyguard.no_require_sim=1
# end build properties
#
# system.prop for surf
#
ro.sf.lcd_density=320
# Size of font cache in hwui
ro.hwui.text_cache_width=2048
ro.hwui.text_cache_height=256
rild.libpath=/system/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
persist.rild.ril.ltedr=0
persist.rild.ril.ltedrtable=max_retries=infinite,10000
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=dyn
ro.sf.compbypass.enable=1
debug.enabletr=true
debug.qctwa.preservebuf=1
dev.pm.dyn_samplingrate=1
# For ICS project, default 32m/48m
dalvik.vm.heapsize=128m
dalvik.vm.heapgrowthlimit=64m
persist.radio.adb_log_on=1
ro.baseband.arch=msm
# Default network type.
# 0 => WCDMA preferred.
ro.telephony.default_network=9
ro.product.hwreset.timer1=9
ro.product.hwreset.timer2=12
#
# system props for the cne module
#
persist.cne.UseCne=false
persist.cne.bat.range.low.med=30
persist.cne.bat.range.med.high=60
persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml
persist.cne.loc.policy.user=/system/etc/UserPolicy.xml
persist.cne.bwbased.rat.sel=false
persist.cne.snsr.based.rat.mgt=false
persist.cne.bat.based.rat.mgt=false
persist.cne.be.ge.sqi.min=0
persist.cne.be.ge.sqi.max=100
persist.cne.be.umts.sqi.min=0
persist.cne.be.umts.sqi.max=100
persist.cne.be.hspa.sqi.min=0
persist.cne.be.hspa.sqi.max=100
persist.cne.be.1x.sqi.min=0
persist.cne.be.1x.sqi.max=100
persist.cne.be.do.sqi.min=0
persist.cne.be.do.sqi.max=100
persist.cne.be.wlan.sqi.min=0
persist.cne.be.wlan.sqi.max=100
ro.hdmi.enable=true
lpa.decode=true
lpa.tunnel=true
lpa.use-stagefright=true
htc.audio.lpa.a2dp=0
htc.audio.global.state=0
htc.audio.global.profile=0
htc.audio.q6.topology=0
htc.audio.enable_dmic=1
#export for SoundHound
persist.htc.audio.pcm.samplerate=44100
persist.htc.audio.pcm.channels=2
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
#
# system props for the data modules
#
ro.use_data_netmgrd=true
persist.data_netmgrd_mtu=1410
#
# system props for telephony modules
#
#device supports LTE
ro.config.lte=true
#device supports EHRPD
#ro.config.ehrpd=true
#device supports simultaneous 1x voice + LTE
#ro.config.svlte1x=true
# Modify MMS APN retry timer from 5s to 2s.
ro.gsm.2nd_data_retry_config = max_retries=3, 2000, 2000, 2000
# holiday RF team request
ro.ril.enable.dtm = 0
ro.ril.gprsclass = 12
ro.ril.hsdpa.category = 14
ro.ril.hsupa.category = 6
ro.ril.hsxpa = 4
# For the default value of agps
ro.ril.def.agps.mode = 2
# For HSDPA low throughput
ro.ril.disable.power.collapse = 1
#system props for time-services
persist.timed.enable=true
# System props for audio
persist.audio.fluence.mode=endfire
persist.audio.vr.enable=false
persist.audio.handset.mic=analog
persist.audio.SupportHTCHWAEC=1
#
# system prop for opengles version
#
# 131072 is decimal for 0x20000 to report version 2
ro.opengles.version=131072
#
# system prop for Bluetooth Dialup Networking
#
ro.qualcomm.bluetooth.dun=false
# system prop for Bluetooth FTP profile
ro.qualcomm.bluetooth.ftp=true
#
# system property for Bluetooth Handsfree Profile Wide Band Speech
#
ro.qualcomm.bluetooth.hfp.wbs=false
#
#system prop for Bluetooth hci transport
ro.qualcomm.bt.hci_transport=smd
#
# system prop for requesting Master role in incoming Bluetooth connection.
#
ro.bluetooth.request.master=true
#
# system prop for Bluetooth Auto connect for remote initated connections
#
ro.bluetooth.remote.autoconnect=true
# system property for Bluetooth discoverability time out in seconds
# 0: Always discoverable
#debug.bt.discoverable_time=0
# system property for Bluetooth Hardware information
ro.product.bluetooth=4.0
#system prop for switching gps driver to qmi
persist.gps.qmienabled=true
# System property for cabl
ro.qualcomm.cabl=1
# For internal fat file system
ro.phone_fat = 1
# Following property will be reference by Settings.
ro.product.display_resolution = 4.7 inch 720p resolution
# Camera H/W information
ro.product.main_camera = 8M
ro.product.front_camera = 1.3M
ro.product.processor = Dual Core
ro.product.ram = 1GB
# hTC FOTA property for SIE.
ro.htc.checkin.delay = 3
ro.config.htc.nocheckin = 0
ro.config.htc.noappupdate = 0
# wifi
wifi.softap.interface=wlan0
wifi.softapconcurrent.interface=softap.0
ro.product.wifi = 802.11 a/b/g/n
init.svc.wpa_supplicant=
init.svc.dhcpcd_wlan0=
dhcp.wlan0.autoip=
dhcp.wlan0.dns1=
dhcp.wlan0.dns2=
dhcp.wlan0.dns3=
dhcp.wlan0.dns4=
dhcp.wlan0.gateway=
dhcp.wlan0.ipaddress=
dhcp.wlan0.leasetime=
dhcp.wlan0.mask=
dhcp.wlan0.ooxx=
dhcp.wlan0.pid=
dhcp.wlan0.reason=
dhcp.wlan0.result=
dhcp.wlan0.server=
net.wlan0.dns1=
net.wlan0.dns2=
wifi.wpa_supp_ready=
wlan.driver.status=
# Support HW reset
ro.product.hwreset = 1
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
drm.service.enabled=true
ro.setupwizard.mode=DISABLED
ro.com.google.gmsversion=4.0_r2
ro.da1.enable=true
ro.vendor.extension_library=/system/lib/libqc-opt.so
ro.com.google.clientidbase=android-qualcomm
htc.audio.swalt.enable=1
htc.audio.swalt.mingain=14512
htc.audio.alc.enable=1
htc.audio.enable_dmic=0
ro.service.dpsvr.enabled=true
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
sbryan12144 said:
I'll patch this bad boy up
Sent from my HTC One XL using Tapatalk 2
Click to expand...
Click to collapse
Sounds good,man,thanks in advance.
Uploading system dump just in case.I couldnt decompile generated system.img,so I'll just post dump from my phone.

JSS15J.I337UCUEMJ6 (Android 4.3)

Heimdall Files
I337UCUEMJ6.7z (1.23 GB)
MD5: E977D7337F131892CAF8383B3A39BA1F
SELinux and KNOX are present, obviously...
ro.build.selinux=1
ro.config.tima=1
Wanna buy me a beer? Head over here
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=JSS15J
ro.build.display.id=JSS15J.I337UCUEMJ6
ro.build.version.incremental=I337UCUEMJ6
ro.build.version.sdk=18
ro.build.version.codename=REL
ro.build.version.release=4.3
ro.build.date=Thu Oct 10 16:19:13 KST 2013
ro.build.date.utc=1381389553
ro.build.type=user
ro.build.user=se.infra
ro.build.host=R0301-14
ro.build.tags=release-keys
ro.product.model=SAMSUNG-SGH-I337
ro.product.brand=samsung
ro.product.name=jflteuc
ro.product.device=jflteatt
ro.product.board=MSM8960
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=msm8960
# ro.build.product is obsolete; use ro.product.device
ro.build.product=jflteatt
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=jflteuc-user 4.3 JSS15J I337UCUEMJ6 release-keys
ro.build.fingerprint=samsung/jflteuc/jflteatt:4.3/JSS15J/I337UCUEMJ6:user/release-keys
ro.build.characteristics=att
# Samsung Specific Properties
ro.build.PDA=I337UCUEMJ6
ro.build.hidden_ver=I337UCUEMJ6
ro.build.changelist=1849109
ro.product_ship=false
ro.chipname=apq8064
# end build properties
#
# system.prop for surf
#
rild.libpath=/system/lib/libsec-ril.so
ro.sf.lcd_density=480
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
debug.sf.hw=1
debug.composition.7x27A.type=mdp
debug.composition.7x25A.type=mdp
dalvik.vm.heapsize=24m
debug.composition.type=dyn
persist.hwc.mdpcomp.enable=true
service.camera.gpu.enable=0
#
# system props for the cne module
#
persist.cne.feature=0
#
# system props for the MM modules
#
media.stagefright.enable-player=true
media.stagefright.enable-meta=false
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.enable-commonsource=true
#
# system props for the LPA/TUNNEL
#
lpa.decode=false
tunnel.decode=true
lpa.use-stagefright=true
#
# system prop for opengles version
#
ro.opengles.version=196608
#
# system props for the data modules
#
ro.use_data_netmgrd=true
persist.data.ds_fmc_app.mode=0
#
# system props for IMS module
#
persist.ims.regmanager.mode=0
#
# system prop for requesting Master role in incoming Bluetooth connection.
#
ro.bluetooth.request.master=true
#
# system prop for Bluetooth FTP profile
#
ro.qualcomm.bluetooth.ftp=true
#
# system prop for Bluetooth SAP profile
#
ro.qualcomm.bluetooth.sap=true
#
# system prop for Bluetooth Auto connect for remote initated connections
#
ro.bluetooth.remote.autoconnect=true
#
#system property for Bluetooth discoverability timeout in seconds
#0: Always discoverable
#debug.bt.discoverable_time=0
#
# System prop to disable strict mode flash on display
#
persist.sys.strictmode.visual=false
#
# System prop to enable/disable OMH. Enabled by default
#
persist.omh.enabled=1
#System prop to enable ehrpd capability
ro.config.ehrpd=true
# System property for cabl
ro.qualcomm.cabl=0
#
#System prop to determine availability of
#analog fm path
#
ro.fm.analogpath.supported=true
#
#System property for FM transmitter
#
ro.fm.transmitter=false
#
#System property for single instance recording
#
ro.fm.mulinst.recording.support=false
#
#System property for msm
#
ro.hw_plat=7x27a
#
# system props for SD card emulation of emmc partition
#
ro.emmc.sdcard.partition=18
#
# system property to enforce Phone Mode view
#
ro.screen.layout=normal
#
# Turn off tiled rendering
#
debug.enabletr=false
#
#System prop for setting the pixel format
#
ro.staticwallpaper.pixelformat=RGB_565
#
#System prop for disabling the meta data mode for encoder
#
debug.camcorder.disablemeta=0
#
# Simulate sdcard on /data/media
#
persist.fuse_sdcard=true
#
# System prop for using landscape preview layout in camera
#
debug.camera.landscape=true
#
# System prop for capping scroll velocity
#
ro.max.fling_velocity=4000
#
#system prop for Bluetooth hci transport
#
ro.qualcomm.bt.hci_transport=smd
#
# System prop for Tvout/HDMI
#
persist.sys.camera.transform=0
persist.sys.camera.connect=0
persist.sys.videomode=0
ro.hdmi.enable=true
# System proverty for sys info indication
persist.radio.add_power_save=1
# System property for Default Brightness
ro.lcd_min_brightness=10
ro.lcd_brightness=143
# Keep SIM state on LPM mode
persist.radio.apm_sim_not_pwdn=1
# use se table when search list
persist.radio.use_se_table_only=1
# System prop for PLMN
persist.radio.fill_eons=1
# System prop for SPN
persist.radio.prefer_spn=0
#
# ADDITIONAL_BUILD_PROPERTIES
#
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=128m
dalvik.vm.heapsize=512m
dalvik.vm.heaputilization=0.25
dalvik.vm.heapidealfree=8388608
dalvik.vm.heapconcurrentstart=2097152
ro.vendor.extension_library=/system/lib/libqc-opt.so
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=512k
dalvik.vm.heapmaxfree=8m
ro.hwui.texture_cache_size=48
ro.hwui.layer_cache_size=32
ro.hwui.path_cache_size=8
ro.hwui.shape_cache_size=2
ro.hwui.gradient_cache_size=1
ro.hwui.drop_shadow_cache_size=4
ro.hwui.texture_cache_flush_rate=0.5
ro.hwui.text_small_cache_width=1024
ro.hwui.text_small_cache_height=512
ro.hwui.text_large_cache_width=2048
ro.hwui.text_large_cache_height=1024
ro.sec.fle.encryption=true
ro.hdcp2.rx=tz
ro.secwvk=144
ro.securestorage.support=true
ro.config.alarm_alert=Alarm_Morning_flower.ogg
ro.config.ringtone=ATT_Firefly_Default.ogg
ro.config.notification_sound=Whisper.ogg
ro.monkey=0
ro.error.receiver.default=com.samsung.receiver.error
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
persist.log.seclevel=1
persist.translation.assistant=0
ro.crypto.support=recovery_mount|others
ro.com.google.clientidbase=android-samsung
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.adb.qemud=1
ro.setupwizard.mode=OPTIONAL
ro.com.google.apphider=off
ro.com.google.clientidbase.ms=android-att-us
ro.com.google.clientidbase.am=android-att-us
ro.com.google.clientidbase.yt=android-samsung
ro.com.google.clientidbase.gmm=android-samsung
ro.com.google.gmsversion=4.3_r1
ro.kernel.qemu=0
ro.build.selinux=1
ro.config.tima=1
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.qc.sdk.izat.premium_enabled=0
persist.gps.qc_nlp_in_use=0
Oh, no way!!! Thank you!
Sent from my GT-I9505 using Tapatalk
Is there any known bugs on this build?
Andrew149 said:
Is there any known bugs on this build?
Click to expand...
Click to collapse
I am going to send all of my pokemon after you!!
designgears said:
Why do people ask this on leaks.. like post #2... come on now... how could we possibly know?!
I am going to send all of my pokemon after you!!
Click to expand...
Click to collapse
People are gonna ask, so might as well get it out the way.
Sent from my Nexus 7 using Tapatalk 4
---------- Post added at 10:22 PM ---------- Previous post was at 10:17 PM ----------
designgears said:
I am going to send all of my pokemon after you!!
Click to expand...
Click to collapse
send pikachu first!
You freaking rock! Thanks!
This is an Odin update?
squarebobspongepants said:
This is an Odin update?
Click to expand...
Click to collapse
yes aka kies
Andrew149 said:
yes aka kies
Click to expand...
Click to collapse
awesome
---------- Post added at 01:33 AM ---------- Previous post was at 12:52 AM ----------
I seem to be doing something wrong, I'm on stock MF3. Can I update to this?
This will possibly help us SS users. Hm thanks!
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Can I straight update to this from mf3 running ss?
Sent from my GT-I9505 using xda app-developers app
dankify said:
Can I straight update to this from mf3 running ss?
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
yes it a 100% stock 4.3 it will wipe everything.
Andrew149 said:
yes it a 100% stock 4.3 it will wipe everything.
Click to expand...
Click to collapse
Are custom kernels and stuff ready to go for it? That is awesome if so
Sent from i337 S4
Thanks DG, I pulled the modem and tested it on VisionX MJ5 Rom. I posted the flashable zip for the modem here:
http://forum.xda-developers.com/showthread.php?t=2496517
EDIT: Tested on 4.3 based international Roms and 4.2.2 based ATT firmware Roms and it worked good.
Sent From My Spiderman Themed I337
dankify said:
Are custom kernels and stuff ready to go for it? That is awesome if so
Sent from i337 S4
Click to expand...
Click to collapse
No, I don't think any kernels will be released until we have a 100% official 4.3.
this is the Heimdall Suite 1.4.0 (Binaries) we use to flash this software...
https://bitbucket.org/benjamin_dobell/heimdall/downloads/heimdall-suite-1.4.0-win32.zip
also if it says error on your pc install this
http://www.microsoft.com/en-au/download/details.aspx?id=30679
Before I Bork my s4- this is will work with mf3?
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
ph0dacbeit said:
Before I Bork my s4- this is will work with mf3?
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes
---------- Post added at 03:17 AM ---------- Previous post was at 02:37 AM ----------
designgears said:
I am going to send all of my pokemon after you!!
Click to expand...
Click to collapse
Is this how we flash 4.3?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
designgears said:
Heimdall Files
I337UCUEMJ6.7z (1.23 GB)
MD5: E977D7337F131892CAF8383B3A39BA1F
SELinux and KNOX are present, obviously...
ro.build.selinux=1
ro.config.tima=1
Wanna buy me a beer? Head over here
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=JSS15J
ro.build.display.id=JSS15J.I337UCUEMJ6
ro.build.version.incremental=I337UCUEMJ6
ro.build.version.sdk=18
ro.build.version.codename=REL
ro.build.version.release=4.3
ro.build.date=Thu Oct 10 16:19:13 KST 2013
ro.build.date.utc=1381389553
ro.build.type=user
ro.build.user=se.infra
ro.build.host=R0301-14
ro.build.tags=release-keys
ro.product.model=SAMSUNG-SGH-I337
ro.product.brand=samsung
ro.product.name=jflteuc
ro.product.device=jflteatt
ro.product.board=MSM8960
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=msm8960
# ro.build.product is obsolete; use ro.product.device
ro.build.product=jflteatt
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=jflteuc-user 4.3 JSS15J I337UCUEMJ6 release-keys
ro.build.fingerprint=samsung/jflteuc/jflteatt:4.3/JSS15J/I337UCUEMJ6:user/release-keys
ro.build.characteristics=att
# Samsung Specific Properties
ro.build.PDA=I337UCUEMJ6
ro.build.hidden_ver=I337UCUEMJ6
ro.build.changelist=1849109
ro.product_ship=false
ro.chipname=apq8064
# end build properties
#
# system.prop for surf
#
rild.libpath=/system/lib/libsec-ril.so
ro.sf.lcd_density=480
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
debug.sf.hw=1
debug.composition.7x27A.type=mdp
debug.composition.7x25A.type=mdp
dalvik.vm.heapsize=24m
debug.composition.type=dyn
persist.hwc.mdpcomp.enable=true
service.camera.gpu.enable=0
#
# system props for the cne module
#
persist.cne.feature=0
#
# system props for the MM modules
#
media.stagefright.enable-player=true
media.stagefright.enable-meta=false
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.enable-commonsource=true
#
# system props for the LPA/TUNNEL
#
lpa.decode=false
tunnel.decode=true
lpa.use-stagefright=true
#
# system prop for opengles version
#
ro.opengles.version=196608
#
# system props for the data modules
#
ro.use_data_netmgrd=true
persist.data.ds_fmc_app.mode=0
#
# system props for IMS module
#
persist.ims.regmanager.mode=0
#
# system prop for requesting Master role in incoming Bluetooth connection.
#
ro.bluetooth.request.master=true
#
# system prop for Bluetooth FTP profile
#
ro.qualcomm.bluetooth.ftp=true
#
# system prop for Bluetooth SAP profile
#
ro.qualcomm.bluetooth.sap=true
#
# system prop for Bluetooth Auto connect for remote initated connections
#
ro.bluetooth.remote.autoconnect=true
#
#system property for Bluetooth discoverability timeout in seconds
#0: Always discoverable
#debug.bt.discoverable_time=0
#
# System prop to disable strict mode flash on display
#
persist.sys.strictmode.visual=false
#
# System prop to enable/disable OMH. Enabled by default
#
persist.omh.enabled=1
#System prop to enable ehrpd capability
ro.config.ehrpd=true
# System property for cabl
ro.qualcomm.cabl=0
#
#System prop to determine availability of
#analog fm path
#
ro.fm.analogpath.supported=true
#
#System property for FM transmitter
#
ro.fm.transmitter=false
#
#System property for single instance recording
#
ro.fm.mulinst.recording.support=false
#
#System property for msm
#
ro.hw_plat=7x27a
#
# system props for SD card emulation of emmc partition
#
ro.emmc.sdcard.partition=18
#
# system property to enforce Phone Mode view
#
ro.screen.layout=normal
#
# Turn off tiled rendering
#
debug.enabletr=false
#
#System prop for setting the pixel format
#
ro.staticwallpaper.pixelformat=RGB_565
#
#System prop for disabling the meta data mode for encoder
#
debug.camcorder.disablemeta=0
#
# Simulate sdcard on /data/media
#
persist.fuse_sdcard=true
#
# System prop for using landscape preview layout in camera
#
debug.camera.landscape=true
#
# System prop for capping scroll velocity
#
ro.max.fling_velocity=4000
#
#system prop for Bluetooth hci transport
#
ro.qualcomm.bt.hci_transport=smd
#
# System prop for Tvout/HDMI
#
persist.sys.camera.transform=0
persist.sys.camera.connect=0
persist.sys.videomode=0
ro.hdmi.enable=true
# System proverty for sys info indication
persist.radio.add_power_save=1
# System property for Default Brightness
ro.lcd_min_brightness=10
ro.lcd_brightness=143
# Keep SIM state on LPM mode
persist.radio.apm_sim_not_pwdn=1
# use se table when search list
persist.radio.use_se_table_only=1
# System prop for PLMN
persist.radio.fill_eons=1
# System prop for SPN
persist.radio.prefer_spn=0
#
# ADDITIONAL_BUILD_PROPERTIES
#
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=128m
dalvik.vm.heapsize=512m
dalvik.vm.heaputilization=0.25
dalvik.vm.heapidealfree=8388608
dalvik.vm.heapconcurrentstart=2097152
ro.vendor.extension_library=/system/lib/libqc-opt.so
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=512k
dalvik.vm.heapmaxfree=8m
ro.hwui.texture_cache_size=48
ro.hwui.layer_cache_size=32
ro.hwui.path_cache_size=8
ro.hwui.shape_cache_size=2
ro.hwui.gradient_cache_size=1
ro.hwui.drop_shadow_cache_size=4
ro.hwui.texture_cache_flush_rate=0.5
ro.hwui.text_small_cache_width=1024
ro.hwui.text_small_cache_height=512
ro.hwui.text_large_cache_width=2048
ro.hwui.text_large_cache_height=1024
ro.sec.fle.encryption=true
ro.hdcp2.rx=tz
ro.secwvk=144
ro.securestorage.support=true
ro.config.alarm_alert=Alarm_Morning_flower.ogg
ro.config.ringtone=ATT_Firefly_Default.ogg
ro.config.notification_sound=Whisper.ogg
ro.monkey=0
ro.error.receiver.default=com.samsung.receiver.error
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
persist.log.seclevel=1
persist.translation.assistant=0
ro.crypto.support=recovery_mount|others
ro.com.google.clientidbase=android-samsung
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.adb.qemud=1
ro.setupwizard.mode=OPTIONAL
ro.com.google.apphider=off
ro.com.google.clientidbase.ms=android-att-us
ro.com.google.clientidbase.am=android-att-us
ro.com.google.clientidbase.yt=android-samsung
ro.com.google.clientidbase.gmm=android-samsung
ro.com.google.gmsversion=4.3_r1
ro.kernel.qemu=0
ro.build.selinux=1
ro.config.tima=1
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.qc.sdk.izat.premium_enabled=0
persist.gps.qc_nlp_in_use=0
Click to expand...
Click to collapse
You da man!
System is failing to mount on my phone. everything else took bootloader, recovery ETC
if i install this fw, will i be able to downgrade later? any thought?

I337UCUFMLD 4.4.2 KitKat build.prop

Hopefully leaking to a forum near you soon! (pending permission to leak)
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=KOT49H
ro.build.display.id=KOT49H.I337UCUFMLD
ro.build.version.incremental=I337UCUFMLD
ro.build.version.sdk=19
ro.build.version.codename=REL
ro.build.version.release=4.4.2
ro.build.date=Thu Jan 2 17:30:32 KST 2014
ro.build.date.utc=1388651432
ro.build.type=user
ro.build.user=dpi
ro.build.host=SWDC3404
ro.build.tags=release-keys
ro.product.model=SAMSUNG-SGH-I337
ro.product.brand=samsung
ro.product.name=jflteuc
ro.product.device=jflteatt
ro.product.board=MSM8960
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm8960
# ro.build.product is obsolete; use ro.product.device
ro.build.product=jflteatt
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=jflteuc-user 4.4.2 KOT49H I337UCUFMLD release-keys
ro.build.fingerprint=samsung/jflteuc/jflteatt:4.4.2/KOT49H/I337UCUFMLD:user/release-keys
ro.build.characteristics=att
# Samsung Specific Properties
ro.build.PDA=I337UCUFMLD
ro.build.hidden_ver=I337UCUFMLD
ro.build.changelist=232901
ro.product_ship=false
ro.chipname=apq8064
# end build properties
#
# from device/samsung/jflteatt/system.prop
#
#
# system.prop for surf
#
ro.sf.lcd_density=480
rild.libpath=/system/lib/libsec-ril.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=gpu
dalvik.vm.heapsize=36m
debug.enable.wl_log=1
persist.hwc.mdpcomp.enable=true
debug.mdpcomp.logs=0
#
# system props for the cne module
#
persist.cne.feature=0
lpa.decode=false
tunnel.decode=true
tunnel.audiovideo.decode=false
lpa.use-stagefright=true
qcom.hw.aac.encoder=true
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
media.aac_51_output_enabled=true
#33395 is sum of supported format flags in AAL
#Formats: AVI AC3 ASF AAC QCP DTS 3G2
mm.enable.qcom_parser=33395
#
# system props for the data modules
#
ro.use_data_netmgrd=true
persist.data.netmgrd.qos.enable=false
#system props for time-services
persist.timed.enable=true
# System props for audio
persist.audio.fluence.mode=endfire
persist.audio.vr.enable=false
persist.audio.handset.mic=digital
persist.audio.lowlatency.rec=false
# System prop to select audio resampler quality
af.resampler.quality=255
# System prop to select MPQAudioPlayer by default on mpq8064
mpq.audio.decode=true
#
# system prop for opengles version
#
# 196608 is decimal for 0x30000 to report version 3
ro.opengles.version=196608
# system prop for requesting Master role in incoming Bluetooth connection.
#
ro.bluetooth.request.master=true
#
# system prop for Bluetooth Auto connect for remote initated connections
#
ro.bluetooth.remote.autoconnect=true
# system property for Bluetooth discoverability time out in seconds
# 0: Always discoverable
#debug.bt.discoverable_time=0
#system prop for switching gps driver to qmi
persist.gps.qmienabled=true
#System prop to enable ehrpd capability
ro.config.ehrpd=true
# System property for cabl
ro.qualcomm.cabl=0
# System prop for sending transmit power request to RIL during WiFi hotspot on/off
#
ro.ril.transmitpower=true
#Simulate sdcard on /data/media
#
persist.fuse_sdcard=true
ro.hwui.text_cache_width=2048
#
# Supports warmboot capabilities
#
ro.warmboot.capability=1
#
#snapdragon value add features
#
ro.qc.sdk.audio.ssr=false
##fluencetype can be "fluence" or "fluencepro" or "none"
ro.qc.sdk.audio.fluencetype=none
ro.qc.sdk.camera.facialproc=true
ro.qc.sdk.gestures.camera=false
ro.qc.sdk.sensors.gestures=false
#property to check if dynamic resolution change is supported in framework
ro.streaming.video.drs=true
#property to enable user to access Google WFD settings.
persist.debug.wfd.enable=1
#property to choose between virtual/external wfd display
persist.sys.wfd.virtual=0
#system prop for setting rmnet mux mode
persist.rmnet.mux=disabled
#
# System prop for Tvout/HDMI
#
persist.sys.camera.transform=0
persist.sys.camera.connect=0
persist.sys.videomode=0
ro.hdmi.enable=true
# System property for Default Brightness
ro.lcd_min_brightness=10
ro.lcd_brightness=143
# System proverty for sys info indication
persist.radio.add_power_save=1
# Keep SIM state on LPM mode
persist.radio.apm_sim_not_pwdn=1
# use se table when search list
persist.radio.use_se_table_only=1
# System prop for PLMN
persist.radio.fill_eons=1
# System prop for SPN
persist.radio.prefer_spn=0
# Boot animation fps
boot.fps=25
media.enable-commonsource=true
#
# ADDITIONAL_BUILD_PROPERTIES
#
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=128m
dalvik.vm.heapsize=512m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
persist.log.seclevel=1
persist.translation.assistant=0
ro.vendor.extension_library=/vendor/lib/libqc-opt.so
ro.build.scafe=americano
ro.build.scafe.size=short
ro.build.scafe.shot=single
ro.hdcp2.rx=tz
ro.secwvk=144
ro.securestorage.support=true
security.mdpp=None
ro.security.mdpp.ver=1.0
ro.security.mdpp.release=1
security.mdpp.result=None
ro.security.mdpp.ux=Enabled
ro.sec.fle.encryption=true
ro.hwui.texture_cache_size=48
ro.hwui.layer_cache_size=32
ro.hwui.path_cache_size=8
ro.hwui.shape_cache_size=2
ro.hwui.gradient_cache_size=1
ro.hwui.drop_shadow_cache_size=4
ro.hwui.texture_cache_flush_rate=0.5
ro.hwui.text_small_cache_width=1024
ro.hwui.text_small_cache_height=512
ro.hwui.text_large_cache_width=2048
ro.hwui.text_large_cache_height=1024
ro.config.ringtone=ATT_Firefly_Default.ogg
ro.config.notification_sound=Whisper.ogg
ro.config.alarm_alert=Alarm_Morning_flower.ogg
ro.config.media_sound=Media_preview_Touch_the_light.ogg
ro.setupwizard.mode=OPTIONAL
ro.com.google.apphider=on
ro.com.google.clientidbase=android-samsung
ro.com.google.clientidbase.ms=android-att-us
ro.com.google.clientidbase.am=android-att-us
ro.com.google.clientidbase.yt=android-samsung
ro.com.google.clientidbase.gmm=android-samsung
ro.com.google.gmsversion=4.4_r1
persist.sys.dalvik.vm.lib=libdvm.so
ro.kernel.qemu=0
ro.build.selinux=1
ro.config.knox=1
ro.config.tima=1
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.qc.sdk.izat.premium_enabled=1
ro.qc.sdk.izat.service_mask=0x5
persist.gps.qc_nlp_in_use=0
ro.gps.agps_provider=1
wow. where did u get this from?
ksj0823 said:
wow. where did u get this from?
Click to expand...
Click to collapse
From my getting place
U done it again DG...... Awesome....:good:
Swyped from MK2 Dark Carnage SS Edition
Looks like I may be eating my words with my comment on our 4.4 being at least two months away.. guess I can't complain too much ;P
Fingers crossed. Thanks for the continued info/leaks over the years.
designgears said:
Hopefully leaking to a forum near you soon! (pending permission to leak)
Click to expand...
Click to collapse
Permission granted soldier:silly:
Woohoo!
Can't wait for this, didn't think an at&t build would be available for months..Someone grant permission
designgears said:
From my getting place
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
word
Guys if you don't care about flashing Roms and when this is released go ahead but if you wait for kexec for 4.3 you can flash any ROM you want.
Sent from my SCH-I545 using xda premium
[email protected] said:
Guys if you don't care about flashing Roms and when this is released go ahead but if you wait for kexec for 4.3 you can flash any ROM you want.
Sent from my SCH-I545 using xda premium
Click to expand...
Click to collapse
I agree, but for the as it stands right now we haven't gotten kexec to work... at least not publicly. A lot of the novice folks around here are losing their patience and want 4.4. Whereas most of power users that hung back on MF3 or updated to MK2 to test are biting at the bullet waiting for kexec to be implemented in Safestrap. I'm sure we'll see a fairly even split of users using this if the DG get's permission to post it.
Looks like this will be ATT Release and not a leak? To my untrained eye at least. It is not test-keys but release-keys. Hope you get the OK and we can get some Roms out of it... Thanks ahead of time.
Sent From My Spiderman,Ironman,Red,Dark Blue,Green, GreyedOut BadAss Themed I337
Capt said:
Are you going to extract the modem from this just like you have done with the rest?
Click to expand...
Click to collapse
I will try unless someone else beats me to it. It will depend on the file structure and if I will need to flash it or not. If I would have to flash the Odin file then it won't happen from me as I am not gonna give up my loki'd bootloaders.
Sent From My Spiderman,Ironman,Red,Dark Blue,Green, GreyedOut BadAss Themed I337
I'm so ready for this release. I have the leaked 4.4.2 on my note 3 and glad I took the jump. Now waiting for the s4 4.4.2.
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
F0rg0tt3n270 said:
I'm so ready for this release. I have the leaked 4.4.2 on my note 3 and glad I took the jump. Now waiting for the s4 4.4.2.
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Any noticeable improvement over 4.3 on your Note? Anything visual other than the status bar icons like battery and signal?
timmytim said:
Any noticeable improvement over 4.3 on your Note? Anything visual other than the status bar icons like battery and signal?
Click to expand...
Click to collapse
Not really anything visual. Seems like its all in the background as the speed is incredibly fast and less laggy. It runs very smooth with no fc's yet and no issues with sd card like others have said.
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
When do you think you will get permission to leak this? I am waiting patiently as 4.3 is really laggy.
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
Can't wait for this. ???
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Can anyone tell how to use loki patch for I337 MK2 4.3, I have read alot and cant figure it out. I have used Loki by Adam and did loki thru emulator but fails, I want out get out of this touch wis. Thanks

[ROM]N9005ZHUENB1 Android 4.4.2 Kitkat

N9005ZHUENB1 Android 4.4.2 Kitkat
File Name:
AP_N9005ZHUENB1_529386_REV03_user_low_ship_MULTI_CERT.tar.md5
BL_N9005ZHUENB1_529386_REV03_user_low_ship_MULTI_CERT.tar.md5
CP_N9005ZHUENB1_529386_REV03_user_low_ship_MULTI_CERT.tar.md5
CSC_ZZH_N9005ZZHENB1_529386_REV03_user_low_ship_MULTI_CERT.tar.md5
HLTE_HKTW_OPEN_16G.pit
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download Link:http://pan.baidu.com/s/1gdkPciB
lqhorochi said:
N9005ZHUENB1 Android 4.4.2 Kitkat
File Name:
AP_N9005ZHUENB1_529386_REV03_user_low_ship_MULTI_CERT.tar.md5
BL_N9005ZHUENB1_529386_REV03_user_low_ship_MULTI_CERT.tar.md5
CP_N9005ZHUENB1_529386_REV03_user_low_ship_MULTI_CERT.tar.md5
CSC_ZZH_N9005ZZHENB1_529386_REV03_user_low_ship_MULTI_CERT.tar.md5
HLTE_HKTW_OPEN_16G.pit
Download Link:http://pan.baidu.com/s/1gdkPciB
Click to expand...
Click to collapse
Hi,
Have you installed this image? Downloading now, its a slow download!
Ash.
ash99 said:
Hi,
Have you installed this image? Downloading now, its a slow download!
Ash.
Click to expand...
Click to collapse
Good Catch ! What region is this ? thx
snout said:
Good Catch ! What region is this ? thx
Click to expand...
Click to collapse
Looks like Hong Kong due to the 16GB PIT file.
build.pro
I just tried to unpack the zip with kitchen and I got this build.pro
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=KOT49H
ro.build.display.id=KOT49H.N9005ZHUENB1
ro.build.version.incremental=N9005ZHUENB1
ro.build.version.sdk=19
ro.build.version.codename=REL
ro.build.version.release=[COLOR="Red"]4.4.2[/COLOR]
ro.build.date=Tue Jan 28 16:51:12 KST 2014
ro.build.date.utc=1390895472
ro.build.type=user
ro.build.user=dpi
ro.build.host=SWDD5811
ro.build.tags=release-keys
ro.product.model=SM-N9005
ro.product.brand=samsung
ro.product.name=[COLOR="Red"]hltezh[/COLOR]
ro.product.device=hlte
ro.product.board=MSM8974
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=msm8974
# ro.build.product is obsolete; use ro.product.device
ro.build.product=hlte
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=hltezh-user 4.4.2 KOT49H N9005ZHUENB1 release-keys
ro.build.fingerprint=samsung/hltezh/hlte:4.4.2/KOT49H/N9005ZHUENB1:user/release-keys
ro.build.characteristics=phone
# Samsung Specific Properties
ro.build.PDA=N9005ZHUENB1
ro.build.hidden_ver=N9005ZHUENB1
ro.build.changelist=[COLOR="Red"]529386[/COLOR]
ro.product_ship=true
ro.chipname=MSM8974
[COLOR="Red"]ro.build.knox.container=[/COLOR]
# end build properties
#
# from device/samsung/hlte/system.prop
#
#
# system.prop for msm8974
#
ro.sf.lcd_density=480
rild.libpath=/system/lib/libsec-ril.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
# Start in cdma mode
#ro.telephony.default_network=5
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=c2d
persist.hwc.mdpcomp.enable=true
debug.disable.bwc=1
debug.mdpcomp.logs=0
dalvik.vm.heapsize=36m
dev.pm.dyn_samplingrate=1
persist.demo.hdmirotationlock=false
ro.hdmi.enable=true
tunnel.decode=true
tunnel.audiovideo.decode=true
lpa.decode=false
lpa.use-stagefright=true
persist.speaker.prot.enable=false
qcom.hw.aac.encoder=true
#
# system props for the cne module
#
persist.cne.feature=0
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
mm.enable.smoothstreaming=true
media.aac_51_output_enabled=true
#37491 is decimal sum of supported codecs in AAL
#codecs: AVI AC3 ASF AAC QCP DTS 3G2 MP2TS
mm.enable.qcom_parser=37491
# VIDC: debug_levels
# 1:ERROR 2:HIGH 4:LOW 0:NOLOGS 7:AllLOGS
vidc.debug.level=1
#
# system props for the data modules
#
# RIL team modification
# netmgrd should be false in EVO-RIL model
ro.use_data_netmgrd=false
# RIL team modification
# qos will temporary false while supporting qos in EVO-RIL.
persist.data.netmgrd.qos.enable=false
ro.data.large_tcp_window_size=true
#system props for time-services
persist.timed.enable=true
#
# system prop for opengles version
#
# 196608 is decimal for 0x30000 to report version 3
ro.opengles.version=196608
# System property for cabl
ro.qualcomm.cabl=1
#
# System props for telephony
# System prop to turn on CdmaLTEPhone always
telephony.lteOnCdmaDevice=0
#Simulate sdcard on /data/media
#
persist.fuse_sdcard=true
# System proverty for sys info indication
persist.radio.add_power_save=1
#
#snapdragon value add features
#
ro.qc.sdk.audio.ssr=false
##fluencetype can be "fluence" or "fluencepro" or "none"
ro.qc.sdk.audio.fluencetype=none
persist.audio.fluence.voicecall=true
persist.audio.fluence.voicerec=false
persist.audio.fluence.speaker=true
ro.qc.sdk.sensors.gestures=true
ro.qc.sdk.gestures.camera=false
ro.qc.sdk.camera.facialproc=false
#property to enable user to access Google WFD settings.
persist.debug.wfd.enable=1
#property to choose between virtual/external wfd display
persist.sys.wfd.virtual=0
tunnel.audio.encode = true
#use VERY_HIGH_QUALITY for audio resampler
af.resampler.quality=4
# System property for storage_preload
persist.sys.storage_preload=1
#SLook
ro.slook.ver=1
#
# ADDITIONAL_BUILD_PROPERTIES
#
persist.sys.logkit.ctrlcode=0
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
ro.com.google.clientidbase=android-samsung
ro.vendor.extension_library=/vendor/lib/libqc-opt.so
persist.radio.apm_sim_not_pwdn=1
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=128m
dalvik.vm.heapsize=512m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
ro.build.scafe=americano
ro.build.scafe.size=short
ro.build.scafe.shot=double
ro.sec.fle.encryption=true
ro.hdcp2.rx=tz
media.enable-commonsource=true
ro.secwvk=144
ro.securestorage.support=true
security.mdpp=None
ro.security.mdpp.ver=1.0
ro.security.mdpp.release=2
security.mdpp.result=None
ro.hwui.texture_cache_size=48
ro.hwui.layer_cache_size=32
ro.hwui.path_cache_size=8
ro.hwui.shape_cache_size=2
ro.hwui.gradient_cache_size=1
ro.hwui.drop_shadow_cache_size=4
ro.hwui.texture_cache_flush_rate=0.5
ro.hwui.text_small_cache_width=1024
ro.hwui.text_small_cache_height=512
ro.hwui.text_large_cache_width=2048
ro.hwui.text_large_cache_height=1024
ro.error.receiver.default=com.samsung.receiver.error
ro.config.ringtone=Over_the_horizon.ogg
ro.config.notification_sound=S_Whistle.ogg
ro.config.alarm_alert=Alarm_Morning_flower.ogg
ro.config.media_sound=Media_preview_Touch_the_light.ogg
ro.security.mdpp.ux=Enabled
ro.setupwizard.mode=DISABLED
ro.com.google.gmsversion=4.4.2_r1
persist.sys.dalvik.vm.lib=libdvm.so
ro.build.selinux=1
ro.kernel.qemu=0
ro.config.tima=1
[COLOR="red"]ro.config.knox=1[/COLOR]
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.qc.sdk.izat.premium_enabled=0
ro.qc.sdk.izat.service_mask=0x0
persist.gps.qc_nlp_in_use=0
ro.gps.agps_provider=1
kmokhtar79 said:
I just tried to unpack the zip with kitchen and I got this build.pro
Click to expand...
Click to collapse
Safe to flash on Note 3 UK?
ama3654 said:
Safe to flash on Note 3 UK?
Click to expand...
Click to collapse
I don't know but Note 3 Hong Kong version is 16 GB and has different PIT. I think your phone would stuck in flashing process.
Sent from my SM-N9005
Hi,
Flashed in a 16GB HK phone but same problems. Camera and phone not working and lots of crashes...
j0rd1l0p3z said:
Hi,
Flashed in a 16GB HK phone but same problems. Camera and phone not working and lots of crashes...
Click to expand...
Click to collapse
What is your phone version is it Hong Kong 16 GB version or 32?
kmokhtar79 said:
What is your phone version is it Hong Kong 16 GB version or 32?
Click to expand...
Click to collapse
As I said in my post, is the 16GB version. Bought in HK, in a shop not online.
Samsung Note 3 Region Taiwan Softbrick UDC START
lqhorochi said:
N9005ZHUENB1 Android 4.4.2 Kitkat
File Name:
AP_N9005ZHUENB1_529386_REV03_user_low_ship_MULTI_CERT.tar.md5
BL_N9005ZHUENB1_529386_REV03_user_low_ship_MULTI_CERT.tar.md5
CP_N9005ZHUENB1_529386_REV03_user_low_ship_MULTI_CERT.tar.md5
CSC_ZZH_N9005ZZHENB1_529386_REV03_user_low_ship_MULTI_CERT.tar.md5
HLTE_HKTW_OPEN_16G.pit
Download Link:http://pan.baidu.com/s/1gdkPciB
Click to expand...
Click to collapse
i am having problem "Samsung Note 3 Region Taiwan Softbrick UDC START"
can i use this ROM?
and does it trigger knox?
Thank you for helping..
ama3654 said:
Safe to flash on Note 3 UK?
Click to expand...
Click to collapse
kmokhtar79 said:
I don't know but Note 3 Hong Kong version is 16 GB and has different PIT. I think your phone would stuck in flashing process.
Sent from my SM-N9005
Click to expand...
Click to collapse
Most def would not flash this on any device other than a HK one, or it will brick it.
j0rd1l0p3z said:
Hi,
Flashed in a 16GB HK phone but same problems. Camera and phone not working and lots of crashes...
Click to expand...
Click to collapse
Did you try a full reset after you install it? I mean factory reset including full erase the internal(built in memory card) memory.
Can I flash this with odin in my 32GB N9005? Base rom was from HK rom 4.3 and then I flashed Omega 6.0 (4.3) without wipe and using it now:
Country of Origin:
Vietnam
Product Code:
SM-N9005ZKETGY
Sales Code (aka Region Code):
TGY/EUR
CSC Country ISO:
GR
Bootloader Version:
N9005XXUBMI7
Baseband Version:
N9005ZHUDMJ9
Build Number:
Omega v6.0 - XXUDML2 (N9005XXUDML2)
XOLO q3000
Can I flash the same on XOLO q3000 which have Mediatek MT6589T and 5.7 display
kmokhtar79
kmokhtar79 said:
I don't know but Note 3 Hong Kong version is 16 GB and has different PIT. I think your phone would stuck in flashing process.
Sent from my SM-N9005
Click to expand...
Click to collapse
what about mine?
i am having problem "Samsung Note 3 Region Taiwan Softbrick UDC START"
can i use this ROM?
and does it trigger knox?
Thank you for helping..
i realise that only Region Taiwan firmware and hongkong are compatible
Taiwan ZTU
Hongkong ZHU
If you are not going to root and keep you Knox status in 0×0 I suggest waiting for official firmware that supports your device.
Sent from my SM-N9005
Sent from my SM-N9005
thank You
kmokhtar79 said:
If you are not going to root and keep you Knox status in 0×0 I suggest waiting for official firmware that supports your device.
Sent from my SM-N9005
Sent from my SM-N9005
Click to expand...
Click to collapse
Thank you very much, but i not sure when will be the official, cause i am having a soft-bricked phone.. it is very annoying..
[successful] Note 3 Taiwan 16GB Survive UDC START problem
budi_west said:
Thank you very much, but i not sure when will be the official, cause i am having a soft-bricked phone.. it is very annoying..
Click to expand...
Click to collapse
[successful] Note 3 Taiwan 16GB Survive UDC START problem
I have downloaded N9005ZHUENB1 and flashed to my Samsung note 3 Taiwan 16GB , succeed
I Survive
My Samsung Galaxy Note 3 Taiwan Region 16GB is UP and On Testing
my problem is odin mode with new line "UDC START"
hope this can help somebody
budi_west said:
[successful] Note 3 Taiwan 16GB Survive UDC START problem
I have downloaded N9005ZHUENB1 and flashed to my Samsung note 3 Taiwan 16GB , succeed
I Survive
My Samsung Galaxy Note 3 Taiwan Region 16GB is UP and On Testing
my problem is odin mode with new line "UDC START"
hope this can help somebody
Click to expand...
Click to collapse
That's great, and would you please tell us whether you selected all files, because I can see there are 5 files already in download zip:
AP_N9005ZHUENB1_529386_REV03_user_low_ship_MULTI_CERT.tar
BL_N9005ZHUENB1_529386_REV03_user_low_ship_MULTI_CERT.tar
CP_N9005ZHUENB1_529386_REV03_user_low_ship_MULTI_CERT.tar
CSC_ZZH_N9005ZZHENB1_529386_REV03_user_low_ship_MULTI_CERT.tar
HLTE_HKTW_OPEN_16G.pit

[DEODEXER] [D2305] [4.3] 18.0.A.1.30 Deodexed, Zipaligned Flashable Zip

Hi Everyone,I Have Deodexed & Zipaligned D2305 4.3 18.0.A.1.30 With Flashable Zip
Some Apk Will Have .odex File If You Have Carrier Apps
Requirements
Unlocked Bootloader
Rooted
CWM Recovery
Installation:
1.Download The Zip & Move It To Your Phone
2.Boot Into CWM Recovery & Flash It
3.Clear Cache & Dalvik Cache
4.Done
Notes:
In The Zip Only Included System Apps & Frameworks,So You Can Only Flash It On 18.0.A.1.30 Firmware
Download:
Deodexed & Zipaligned D2305 4.3 18.0.A.1.30 ( 400.4 MB )
Mirror
Deodexed & Zipaligned D2305 4.3 18.0.A.1.30 ( 400.4 MB )
Credits
saiarkar
RyokoN
™LEO
Please Hit
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Button If You Appreciated / If You Like It​
Changelog
17 May 2014
Added Another Download Link
@Ben Ling
Could you send me build.prop from the device?
Thanks,
AJ
Abhinav2 said:
@Ben Ling
Could you send me build.prop from the device?
Thanks,
AJ
Click to expand...
Click to collapse
Code:
##### Merging of the /util/data/semc_kernel_time_stamp.prop file #####
ro.build.date=Tue Mar 18 02:43:12 CST 2014
ro.build.date.utc=1395081792
ro.build.user=rdadmin
ro.build.host=J68-4
##### Final patch of properties #####
ro.build.product=D2305
ro.build.description=D2305-user 4.3 JLS36C Android.1080 test-keys
ro.product.brand=Sony
ro.product.name=D2305
ro.product.device=D2305
ro.build.version.incremental=4fv_bw
ro.build.tags=release-keys
ro.build.fingerprint=Sony/D2305/D2305:4.3/18.0.A.1.30/4fv_bw:user/release-keys
######################## Customized property values #########################
ro.semc.version.cust=1280-6948
ro.semc.version.cust_revision=R3A
ro.somc.customerid=442
#############################################################################
################# Updating of the SW Version #################
ro.semc.version.fs_revision=18.0.A.1.30
ro.build.id=18.0.A.1.30
ro.build.display.id=18.0.A.1.30
##### Values from product package metadata #####
ro.semc.product.model=D2305
ro.semc.ms_type_id=PM-0720-BV
ro.semc.version.fs=GLOBAL-HSPASS
ro.semc.product.name=D2305
ro.semc.product.device=D23
ro.product.model=D2305
# begin build properties
# autogenerated by buildinfo.sh
ro.build.version.sdk=18
ro.build.version.codename=REL
ro.build.version.release=4.3
ro.build.type=user
ro.product.board=MSM8226
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Sony
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm8226
# ro.build.product is obsolete; use ro.product.device
# Do not try to parse ro.build.description or .fingerprint
ro.build.characteristics=default
persist.sys.mtbf.enable=0
persist.mtbf.address=http://seldmtbt01.gte.nu/textreport/submittext.aspx
persist.mtbf.phone=+8613911379210
persist.sys.mtbf.crash_level=0
drm.service.enabled=true
# end build properties
#
# system.prop for msm8226
#
# Use reference RIL for initial bringup
#rild.libpath=/system/lib/libreference-ril.so
rild.libpath=/vendor/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
persist.radio.msgtunnel.start=false
# Start in cdma mode
ro.telephony.default_network=0
#
# system props for the cne module
#
persist.cne.feature=1
# Skip /sys/power/wait_for_fb_* nodes and
# force FB to be always on
debug.sf.fb_always_on=1
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=c2d
persist.hwc.mdpcomp.enable=true
debug.mdpcomp.logs=0
dalvik.vm.heapsize=36m
dev.pm.dyn_samplingrate=1
persist.demo.hdmirotationlock=true
ro.hdmi.enable=true
tunnel.decode=false
tunnel.audiovideo.decode=false
lpa.decode=false
lpa.use-stagefright=true
qcom.hw.aac.encoder=true
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
mm.enable.smoothstreaming=true
#9273 is decimal sum of supported codecs in AAL
#codecs:(PARSER_)AVI AC3 ASF AAC QCP DTS 3G2 MP2TS
mm.enable.qcom_parser=37491
# VIDC: debug_levels
# 1:ERROR 2:HIGH 4:LOW 0:NOlogs 7:AllLogs
vidc.debug.level=1
#
# system props for the data modules
#
ro.use_data_netmgrd=true
persist.data.netmgrd.qos.enable=true
#system props for time-services
persist.timed.enable=true
#
# system prop for opengles version
#
# 196608 is decimal for 0x30000 to report version 3
ro.opengles.version=196608
#
# System props for telephony
# System prop to turn on CdmaLTEPhone always
telephony.lteOnCdmaDevice=0
# simulate sdcard on /data/media
#
persist.fuse_sdcard=true
#
#snapdragon value add features
#
ro.qc.sdk.audio.ssr=false
##fluencetype can be "fluence" or "fluencepro" or "none"
ro.qc.sdk.audio.fluencetype=fluence
# [SA77] S Ginger Bug#330 Service Menu
#
# system props for NFC capability
#
persist.nfc.cap.fwver=0000000
persist.nfc.cap.hwver=0005
persist.nfc.cap.chipid=0000
#
# system props for Content Type info
#
ro.semc.content.number=PA2
# [SA77] E Ginger Bug#330 Service Menu
# Enable/disable cabl
ro.qualcomm.cabl=1
ro.qualcomm.svi=1
# system prop for NFC DT
ro.nfc.port=I2C
#property to enable user to access Google WFD settings
persist.debug.wfd.enable=1
##property to choose between virtual/external wfd display
persist.sys.wfd.virtual=0
tunnel.audio.encode = true
# property to turn on/off wpa_supplicant debug mode
persist.sys.wifi.debug=false
ro.sf.lcd_density=240
# [VY52] Bug#19 Add GPS log
log.tag.LocationManagerService=VERBOSE
log.tag.GpsLocationProvider=VERBOSE
# [VY52] remove strictmode
persist.sys.strictmode.visual=0
persist.sys.strictmode.disable=1
ro.config.ringtone=xperia.ogg
ro.config.notification_sound=notification.ogg
ro.config.alarm_alert=alarm.ogg
# [VY53][Bug1434][DMS03993317][So] ASIA-AU: Emergency calls only is not displayed either for SIM1 or SIM2, instead No Service is displayed
persist.radio.sim1.callable=false
persist.radio.sim2.callable=false
# [VY5X][Bug1540][DMS04531336][So] OMVCV-SW:The settings "ro.product.locale.excluded" cannot work in MUT..
ro.product.locale.excluded=ar_EG ar_IL fa_IR iw_IL
# [VY5X] [Bug#1789] ph_yen DMS05280088 - [So]ASIA-IN-DL: SIM2 network search shows incorrect results
persist.radio.sim1.networkname=empty
persist.radio.sim2.networkname=empty
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.product-res-path=framework/SemcGenericUxpRes.apk
keyguard.no_require_sim=true
ro.com.android.dataroaming=false
persist.radio.apm_sim_not_pwdn=1
persist.radio.adb_log_on=1
ro.com.android.dateformat=MM-dd-yyyy
ro.config.ringtone=Ring_Synth_04.ogg
ro.config.notification_sound=pixiedust.ogg
ro.carrier=unknown
ro.config.alarm_alert=Alarm_Classic.ogg
ro.error.receiver.default=com.compalcomm.mtbf
drm.service.enabled=true
ro.com.google.clientidbase=android-sonyericsson
ro.com.google.clientidbase.ms=android-sonymobile
ro.somc.clearphase.supported=true
ro.semc.xloud.supported=true
ro.nfc.icon.enable=false
ro.vendor.extension_library=/vendor/lib/libqc-opt.so
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=96m
dalvik.vm.heapsize=256m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
ro.setupwizard.mode=OPTIONAL
ro.com.google.gmsversion=4.3_r1
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.qc.sdk.izat.premium_enabled=1
ro.qc.sdk.izat.service_mask=0x5
persist.gps.qc_nlp_in_use=0
ro.gps.agps_provider=1
ro.drm.active.num=5
ro.drm.active.0=marlin,1
ro.drm.active.1=playready,1
ro.drm.active.2=dtla,1
ro.drm.active.3=marlin_import,1
ro.drm.active.4=ckb,1
ro.sony.fota.encrypteddata=supported
FC com.android.phone and NFC services stopped working

Categories

Resources