Related
Developers only
This is AT&T OTA update from 1.85 to 2.20
Full dump will be up late tonight (I hope)
Hit thanks button
(277Mb)
md5: 39FEB0267D8EE137C328A9C8D1BE1E19
OTA_EVITA_UL_ICS_40_S_Cingular_US_2.20.502.7-1.85.502.3_R2_releasenin45grzkfswb95v.zip
All in one (firmware+Patched System dump)
http://db.tt/kVelsDil
md5: 37548960DE0E3A30FD518B2C922B230D
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I saved the zip.Will run update quick and upload everything
Hell yes,Im in matrix lol
Everything went smooth
excellent; just tried downloading it myself using a fresh 1.85 ruu install... but it know's im not in the USA (even using a vpn/proxy to a buddy of mine in philly). lol
JSLEnterprises said:
excellent; just tried downloading it myself using a fresh 1.85 ruu install... but it know's im not in the USA (even using a vpn/proxy to a buddy of mine in philly). lol
Click to expand...
Click to collapse
how about this http://forum.xda-developers.com/showpost.php?p=29713041&postcount=1
With our s-on situation ota is good for radio,boot image.Patching all those files without user error almost impossible
Everything went smooth,I will upload full dump late tonight
Crappyvate said:
how about this http://forum.xda-developers.com/showpost.php?p=29713041&postcount=1
Click to expand...
Click to collapse
I think i should venture into General a bit more often I guess.
nice will this help as a 4.0.4 kernel so that aosp and cm roms will have their bugs cleared easily?
JSLEnterprises said:
I think i should venture into General a bit more often I guess.
Click to expand...
Click to collapse
yeah,its crazy.Some people post minor mods in upgrade section,some firmwares in general section lol
patched ruu almost ready.Will test it in the kitchen and upload
So this has been verified and tested SAFE to flash over any of the ROMs out and about right now?
All I want to do is get the 2.20 AT&T firmware on there with the corresponding Radio and HBOOT, make a full nandroid backup of it 100% stock and rooted, and then install TN SE 1.6b right back over it.
This will work no issues right?
Also, on a side-note
Does the Zip in the OP have an updated AT&T radio in it? And an updated hboot?
These are really the only things I'm worried about.
jakew02 said:
So this has been verified and tested SAFE to flash over any of the ROMs out and about right now?
All I want to do is get the 2.20 AT&T firmware on there with the corresponding Radio and HBOOT, make a full nandroid backup of it 100% stock and rooted, and then install TN SE 1.6b right back over it.
This will work no issues right?
Also, on a side-note
Does the Zip in the OP have an updated AT&T radio in it? And an updated hboot?
These are really the only things I'm worried about.
Click to expand...
Click to collapse
Its untouched by human hand HTC-Signed zip.
firmaware.zip inside is what you really need
I think you can use it to update firmware as PJ83IMG.zip (with all revert to stock dance) and then flash custom ROM
I'll patch this bad boy up
Sent from my HTC One XL using Tapatalk 2
saketh91 said:
nice will this help as a 4.0.4 kernel so that aosp and cm roms will have their bugs cleared easily?
Click to expand...
Click to collapse
Nope. Not until HTC release the kernel code. Which they have not done yet.
vin255764 said:
Its untouched by human hand HTC-Signed zip.
firmaware.zip inside is what you really need
I think you can use it to update firmware as PJ83IMG.zip (with all revert to stock dance) and then flash custom ROM
Click to expand...
Click to collapse
hm, alright
I'm just weary to download anything right now if it isn't exactly what i'm looking for. At my parents house in Virgina, they live on a newly developed neighborhood, and somehow @^$%^# Verizon hasn't gotten FIOS down the freakin road yet, so they've got the old AT&T wireless broadband modem, and that shizzz only has 5GB / month with a $10/1GB overage. NOT cheap.. and I've already ran my own personal att account " 7 x 1GB Overage Plan".. FML right?
sbryan12144 said:
I'll patch this bad boy up
Sent from my HTC One XL using Tapatalk 2
Click to expand...
Click to collapse
Done yet?
Haha!
scrosler said:
Done yet?
Haha!
Click to expand...
Click to collapse
scott you crackarom-aholic
On a side not has anyone found any changes not in the asia rom?
done,willtry to upload to dropbox
I'm completely stock right now.. What will happen if i update it using the setting "search for update option" ??
build.prop
Code:
ro.ril.oem.ecclist=911
ro.ril.enable.a52=0
ro.ril.enable.a53=1
ro.ril.enable.dtm=0
ro.ril.gprsclass=10
ro.ril.hsdpa.category=14
ro.ril.hsupa.category=6
ro.ril.hsxpa=4
ro.ril.def.agps.mode=1
ro.ril.fast.dormancy.rule=2
ro.ril.att.feature=1
ro.ril.radio.svn=5
ro.ril.disable.fd.plmn.prefix=23402,23410,23411,23420,27202
ro.ril.enable.sdr=0
ro.ril.enable.gea3=1
ro.ril.enable.ucsq=2
ro.ril.set.mtusize=1410
ro.ril.enable.r8fd=0
ro.ril.disable.cpc=1
persist.pdn.profile=phone
ro.ril.multirab.throttling=1
ro.com.google.clientidbase=android-htc
ro.com.google.clientidbase.yt=android-htc
ro.com.google.clientidbase.am=android-att-us
ro.com.google.clientidbase.gmm=android-htc
ro.com.google.clientidbase.ms=android-att-us
ro.telephony.default_network=9
ro.product.model=HTC One X
ro.monkey=0
ro.sllowmock.location=0
ro.ril.ciq=0
ro.da1.enable=true
ro.watch.appid=com.sdgtl.watch.evaul_40_ics_s
ro.ril.enable.pre_r8fd=1
ro.ril.fd.pre_r8_tout.scr_off=3
ro.ril.fd.pre_r8_tout.scr_on=0
ro.ril.fd.r8_tout.scr_off=0
ro.ril.fd.r8_tout.scr_on=0
ro.ril.ltefgi=1577974912
CMSUPPORT=0
dev.defaultwallpaper=/system/customize/resource/scene_wallpaper_htc_default.jpg
dev.deviceimage_large=/system/customize/resource/evita-att_187x370.png
dev.deviceimage_small=/system/customize/resource/evita-att32x58.png
# begin build properties
# autogenerated by buildinfo.sh
ro.aa.project=EVITA_UL_ICS_40_S
ro.aa.romver=2.20.502.7
ro.aa.maincid=CWS__001
ro.aa.modelid=PJ8310000
ro.aa.cidlist=CWS__001
ro.aa.rid=44
ro.aa.customizationid=400676
ro.aa.taskid=271860
ro.aa.skulist=502
ro.aa.mainsku=502
ro.onecid=
ro.aa.report=com
ro.cwkey=CWS__001
ro.com.google.clientidbase=android-htc
ro.build.id=IMM76D
ro.build.display.id=IMM76D
ro.build.version.incremental=79936.7
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.4
ro.build.date=六 7月 14 12:17:04 CST 2012
ro.build.date.utc=1342239424
ro.build.type=user
ro.build.user=
ro.build.host=ABM009
ro.build.tags=release-keys
ro.product.model=htc_evita
ro.product.brand=cingular_us
ro.product.name=evita
ro.product.device=evita
ro.product.board=MSM8960
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=HTC
ro.product.locale.language=xhdpi
ro.wifi.channels=
ro.board.platform=msm8960
# ro.build.product is obsolete; use ro.product.device
ro.build.product=evita
# Do not try to p**** ro.build.description or .fingerprint
ro.build.description=2.20.502.7 CL79936 release-keys
ro.build.description=2.20.502.7 CL79936 release-keys
ro.build.changelist=79936
ro.build.fingerprint=cingular_us/evita/evita:4.0.4/IMM76D/79936.7:user/release-keys
ro.build.characteristics=default
ro.build.project=EVITA_UL_ICS_40_S:271860
ro.product.version=2.20.502.7 710RD
ro.build.languageremove=0
ro.build.sense.version=4.0
keyguard.no_require_sim=1
# end build properties
#
# system.prop for surf
#
ro.sf.lcd_density=320
# Size of font cache in hwui
ro.hwui.text_cache_width=2048
ro.hwui.text_cache_height=256
rild.libpath=/system/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
persist.rild.ril.ltedr=0
persist.rild.ril.ltedrtable=max_retries=infinite,10000
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=dyn
ro.sf.compbypass.enable=1
debug.enabletr=true
debug.qctwa.preservebuf=1
dev.pm.dyn_samplingrate=1
# For ICS project, default 32m/48m
dalvik.vm.heapsize=128m
dalvik.vm.heapgrowthlimit=64m
persist.radio.adb_log_on=1
ro.baseband.arch=msm
# Default network type.
# 0 => WCDMA preferred.
ro.telephony.default_network=9
ro.product.hwreset.timer1=9
ro.product.hwreset.timer2=12
#
# system props for the cne module
#
persist.cne.UseCne=false
persist.cne.bat.range.low.med=30
persist.cne.bat.range.med.high=60
persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml
persist.cne.loc.policy.user=/system/etc/UserPolicy.xml
persist.cne.bwbased.rat.sel=false
persist.cne.snsr.based.rat.mgt=false
persist.cne.bat.based.rat.mgt=false
persist.cne.be.ge.sqi.min=0
persist.cne.be.ge.sqi.max=100
persist.cne.be.umts.sqi.min=0
persist.cne.be.umts.sqi.max=100
persist.cne.be.hspa.sqi.min=0
persist.cne.be.hspa.sqi.max=100
persist.cne.be.1x.sqi.min=0
persist.cne.be.1x.sqi.max=100
persist.cne.be.do.sqi.min=0
persist.cne.be.do.sqi.max=100
persist.cne.be.wlan.sqi.min=0
persist.cne.be.wlan.sqi.max=100
ro.hdmi.enable=true
lpa.decode=true
lpa.tunnel=true
lpa.use-stagefright=true
htc.audio.lpa.a2dp=0
htc.audio.global.state=0
htc.audio.global.profile=0
htc.audio.q6.topology=0
htc.audio.enable_dmic=1
#export for SoundHound
persist.htc.audio.pcm.samplerate=44100
persist.htc.audio.pcm.channels=2
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
#
# system props for the data modules
#
ro.use_data_netmgrd=true
persist.data_netmgrd_mtu=1410
#
# system props for telephony modules
#
#device supports LTE
ro.config.lte=true
#device supports EHRPD
#ro.config.ehrpd=true
#device supports simultaneous 1x voice + LTE
#ro.config.svlte1x=true
# Modify MMS APN retry timer from 5s to 2s.
ro.gsm.2nd_data_retry_config = max_retries=3, 2000, 2000, 2000
# holiday RF team request
ro.ril.enable.dtm = 0
ro.ril.gprsclass = 12
ro.ril.hsdpa.category = 14
ro.ril.hsupa.category = 6
ro.ril.hsxpa = 4
# For the default value of agps
ro.ril.def.agps.mode = 2
# For HSDPA low throughput
ro.ril.disable.power.collapse = 1
#system props for time-services
persist.timed.enable=true
# System props for audio
persist.audio.fluence.mode=endfire
persist.audio.vr.enable=false
persist.audio.handset.mic=analog
persist.audio.SupportHTCHWAEC=1
#
# system prop for opengles version
#
# 131072 is decimal for 0x20000 to report version 2
ro.opengles.version=131072
#
# system prop for Bluetooth Dialup Networking
#
ro.qualcomm.bluetooth.dun=false
# system prop for Bluetooth FTP profile
ro.qualcomm.bluetooth.ftp=true
#
# system property for Bluetooth Handsfree Profile Wide Band Speech
#
ro.qualcomm.bluetooth.hfp.wbs=false
#
#system prop for Bluetooth hci transport
ro.qualcomm.bt.hci_transport=smd
#
# system prop for requesting Master role in incoming Bluetooth connection.
#
ro.bluetooth.request.master=true
#
# system prop for Bluetooth Auto connect for remote initated connections
#
ro.bluetooth.remote.autoconnect=true
# system property for Bluetooth discoverability time out in seconds
# 0: Always discoverable
#debug.bt.discoverable_time=0
# system property for Bluetooth Hardware information
ro.product.bluetooth=4.0
#system prop for switching gps driver to qmi
persist.gps.qmienabled=true
# System property for cabl
ro.qualcomm.cabl=1
# For internal fat file system
ro.phone_fat = 1
# Following property will be reference by Settings.
ro.product.display_resolution = 4.7 inch 720p resolution
# Camera H/W information
ro.product.main_camera = 8M
ro.product.front_camera = 1.3M
ro.product.processor = Dual Core
ro.product.ram = 1GB
# hTC FOTA property for SIE.
ro.htc.checkin.delay = 3
ro.config.htc.nocheckin = 0
ro.config.htc.noappupdate = 0
# wifi
wifi.softap.interface=wlan0
wifi.softapconcurrent.interface=softap.0
ro.product.wifi = 802.11 a/b/g/n
init.svc.wpa_supplicant=
init.svc.dhcpcd_wlan0=
dhcp.wlan0.autoip=
dhcp.wlan0.dns1=
dhcp.wlan0.dns2=
dhcp.wlan0.dns3=
dhcp.wlan0.dns4=
dhcp.wlan0.gateway=
dhcp.wlan0.ipaddress=
dhcp.wlan0.leasetime=
dhcp.wlan0.mask=
dhcp.wlan0.ooxx=
dhcp.wlan0.pid=
dhcp.wlan0.reason=
dhcp.wlan0.result=
dhcp.wlan0.server=
net.wlan0.dns1=
net.wlan0.dns2=
wifi.wpa_supp_ready=
wlan.driver.status=
# Support HW reset
ro.product.hwreset = 1
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
drm.service.enabled=true
ro.setupwizard.mode=DISABLED
ro.com.google.gmsversion=4.0_r2
ro.da1.enable=true
ro.vendor.extension_library=/system/lib/libqc-opt.so
ro.com.google.clientidbase=android-qualcomm
htc.audio.swalt.enable=1
htc.audio.swalt.mingain=14512
htc.audio.alc.enable=1
htc.audio.enable_dmic=0
ro.service.dpsvr.enabled=true
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
sbryan12144 said:
I'll patch this bad boy up
Sent from my HTC One XL using Tapatalk 2
Click to expand...
Click to collapse
Sounds good,man,thanks in advance.
Uploading system dump just in case.I couldnt decompile generated system.img,so I'll just post dump from my phone.
Heimdall Files
I337UCUEMJ6.7z (1.23 GB)
MD5: E977D7337F131892CAF8383B3A39BA1F
SELinux and KNOX are present, obviously...
ro.build.selinux=1
ro.config.tima=1
Wanna buy me a beer? Head over here
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=JSS15J
ro.build.display.id=JSS15J.I337UCUEMJ6
ro.build.version.incremental=I337UCUEMJ6
ro.build.version.sdk=18
ro.build.version.codename=REL
ro.build.version.release=4.3
ro.build.date=Thu Oct 10 16:19:13 KST 2013
ro.build.date.utc=1381389553
ro.build.type=user
ro.build.user=se.infra
ro.build.host=R0301-14
ro.build.tags=release-keys
ro.product.model=SAMSUNG-SGH-I337
ro.product.brand=samsung
ro.product.name=jflteuc
ro.product.device=jflteatt
ro.product.board=MSM8960
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=msm8960
# ro.build.product is obsolete; use ro.product.device
ro.build.product=jflteatt
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=jflteuc-user 4.3 JSS15J I337UCUEMJ6 release-keys
ro.build.fingerprint=samsung/jflteuc/jflteatt:4.3/JSS15J/I337UCUEMJ6:user/release-keys
ro.build.characteristics=att
# Samsung Specific Properties
ro.build.PDA=I337UCUEMJ6
ro.build.hidden_ver=I337UCUEMJ6
ro.build.changelist=1849109
ro.product_ship=false
ro.chipname=apq8064
# end build properties
#
# system.prop for surf
#
rild.libpath=/system/lib/libsec-ril.so
ro.sf.lcd_density=480
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
debug.sf.hw=1
debug.composition.7x27A.type=mdp
debug.composition.7x25A.type=mdp
dalvik.vm.heapsize=24m
debug.composition.type=dyn
persist.hwc.mdpcomp.enable=true
service.camera.gpu.enable=0
#
# system props for the cne module
#
persist.cne.feature=0
#
# system props for the MM modules
#
media.stagefright.enable-player=true
media.stagefright.enable-meta=false
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.enable-commonsource=true
#
# system props for the LPA/TUNNEL
#
lpa.decode=false
tunnel.decode=true
lpa.use-stagefright=true
#
# system prop for opengles version
#
ro.opengles.version=196608
#
# system props for the data modules
#
ro.use_data_netmgrd=true
persist.data.ds_fmc_app.mode=0
#
# system props for IMS module
#
persist.ims.regmanager.mode=0
#
# system prop for requesting Master role in incoming Bluetooth connection.
#
ro.bluetooth.request.master=true
#
# system prop for Bluetooth FTP profile
#
ro.qualcomm.bluetooth.ftp=true
#
# system prop for Bluetooth SAP profile
#
ro.qualcomm.bluetooth.sap=true
#
# system prop for Bluetooth Auto connect for remote initated connections
#
ro.bluetooth.remote.autoconnect=true
#
#system property for Bluetooth discoverability timeout in seconds
#0: Always discoverable
#debug.bt.discoverable_time=0
#
# System prop to disable strict mode flash on display
#
persist.sys.strictmode.visual=false
#
# System prop to enable/disable OMH. Enabled by default
#
persist.omh.enabled=1
#System prop to enable ehrpd capability
ro.config.ehrpd=true
# System property for cabl
ro.qualcomm.cabl=0
#
#System prop to determine availability of
#analog fm path
#
ro.fm.analogpath.supported=true
#
#System property for FM transmitter
#
ro.fm.transmitter=false
#
#System property for single instance recording
#
ro.fm.mulinst.recording.support=false
#
#System property for msm
#
ro.hw_plat=7x27a
#
# system props for SD card emulation of emmc partition
#
ro.emmc.sdcard.partition=18
#
# system property to enforce Phone Mode view
#
ro.screen.layout=normal
#
# Turn off tiled rendering
#
debug.enabletr=false
#
#System prop for setting the pixel format
#
ro.staticwallpaper.pixelformat=RGB_565
#
#System prop for disabling the meta data mode for encoder
#
debug.camcorder.disablemeta=0
#
# Simulate sdcard on /data/media
#
persist.fuse_sdcard=true
#
# System prop for using landscape preview layout in camera
#
debug.camera.landscape=true
#
# System prop for capping scroll velocity
#
ro.max.fling_velocity=4000
#
#system prop for Bluetooth hci transport
#
ro.qualcomm.bt.hci_transport=smd
#
# System prop for Tvout/HDMI
#
persist.sys.camera.transform=0
persist.sys.camera.connect=0
persist.sys.videomode=0
ro.hdmi.enable=true
# System proverty for sys info indication
persist.radio.add_power_save=1
# System property for Default Brightness
ro.lcd_min_brightness=10
ro.lcd_brightness=143
# Keep SIM state on LPM mode
persist.radio.apm_sim_not_pwdn=1
# use se table when search list
persist.radio.use_se_table_only=1
# System prop for PLMN
persist.radio.fill_eons=1
# System prop for SPN
persist.radio.prefer_spn=0
#
# ADDITIONAL_BUILD_PROPERTIES
#
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=128m
dalvik.vm.heapsize=512m
dalvik.vm.heaputilization=0.25
dalvik.vm.heapidealfree=8388608
dalvik.vm.heapconcurrentstart=2097152
ro.vendor.extension_library=/system/lib/libqc-opt.so
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=512k
dalvik.vm.heapmaxfree=8m
ro.hwui.texture_cache_size=48
ro.hwui.layer_cache_size=32
ro.hwui.path_cache_size=8
ro.hwui.shape_cache_size=2
ro.hwui.gradient_cache_size=1
ro.hwui.drop_shadow_cache_size=4
ro.hwui.texture_cache_flush_rate=0.5
ro.hwui.text_small_cache_width=1024
ro.hwui.text_small_cache_height=512
ro.hwui.text_large_cache_width=2048
ro.hwui.text_large_cache_height=1024
ro.sec.fle.encryption=true
ro.hdcp2.rx=tz
ro.secwvk=144
ro.securestorage.support=true
ro.config.alarm_alert=Alarm_Morning_flower.ogg
ro.config.ringtone=ATT_Firefly_Default.ogg
ro.config.notification_sound=Whisper.ogg
ro.monkey=0
ro.error.receiver.default=com.samsung.receiver.error
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
persist.log.seclevel=1
persist.translation.assistant=0
ro.crypto.support=recovery_mount|others
ro.com.google.clientidbase=android-samsung
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.adb.qemud=1
ro.setupwizard.mode=OPTIONAL
ro.com.google.apphider=off
ro.com.google.clientidbase.ms=android-att-us
ro.com.google.clientidbase.am=android-att-us
ro.com.google.clientidbase.yt=android-samsung
ro.com.google.clientidbase.gmm=android-samsung
ro.com.google.gmsversion=4.3_r1
ro.kernel.qemu=0
ro.build.selinux=1
ro.config.tima=1
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.qc.sdk.izat.premium_enabled=0
persist.gps.qc_nlp_in_use=0
Oh, no way!!! Thank you!
Sent from my GT-I9505 using Tapatalk
Is there any known bugs on this build?
Andrew149 said:
Is there any known bugs on this build?
Click to expand...
Click to collapse
I am going to send all of my pokemon after you!!
designgears said:
Why do people ask this on leaks.. like post #2... come on now... how could we possibly know?!
I am going to send all of my pokemon after you!!
Click to expand...
Click to collapse
People are gonna ask, so might as well get it out the way.
Sent from my Nexus 7 using Tapatalk 4
---------- Post added at 10:22 PM ---------- Previous post was at 10:17 PM ----------
designgears said:
I am going to send all of my pokemon after you!!
Click to expand...
Click to collapse
send pikachu first!
You freaking rock! Thanks!
This is an Odin update?
squarebobspongepants said:
This is an Odin update?
Click to expand...
Click to collapse
yes aka kies
Andrew149 said:
yes aka kies
Click to expand...
Click to collapse
awesome
---------- Post added at 01:33 AM ---------- Previous post was at 12:52 AM ----------
I seem to be doing something wrong, I'm on stock MF3. Can I update to this?
This will possibly help us SS users. Hm thanks!
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Can I straight update to this from mf3 running ss?
Sent from my GT-I9505 using xda app-developers app
dankify said:
Can I straight update to this from mf3 running ss?
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
yes it a 100% stock 4.3 it will wipe everything.
Andrew149 said:
yes it a 100% stock 4.3 it will wipe everything.
Click to expand...
Click to collapse
Are custom kernels and stuff ready to go for it? That is awesome if so
Sent from i337 S4
Thanks DG, I pulled the modem and tested it on VisionX MJ5 Rom. I posted the flashable zip for the modem here:
http://forum.xda-developers.com/showthread.php?t=2496517
EDIT: Tested on 4.3 based international Roms and 4.2.2 based ATT firmware Roms and it worked good.
Sent From My Spiderman Themed I337
dankify said:
Are custom kernels and stuff ready to go for it? That is awesome if so
Sent from i337 S4
Click to expand...
Click to collapse
No, I don't think any kernels will be released until we have a 100% official 4.3.
this is the Heimdall Suite 1.4.0 (Binaries) we use to flash this software...
https://bitbucket.org/benjamin_dobell/heimdall/downloads/heimdall-suite-1.4.0-win32.zip
also if it says error on your pc install this
http://www.microsoft.com/en-au/download/details.aspx?id=30679
Before I Bork my s4- this is will work with mf3?
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
ph0dacbeit said:
Before I Bork my s4- this is will work with mf3?
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes
---------- Post added at 03:17 AM ---------- Previous post was at 02:37 AM ----------
designgears said:
I am going to send all of my pokemon after you!!
Click to expand...
Click to collapse
Is this how we flash 4.3?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
designgears said:
Heimdall Files
I337UCUEMJ6.7z (1.23 GB)
MD5: E977D7337F131892CAF8383B3A39BA1F
SELinux and KNOX are present, obviously...
ro.build.selinux=1
ro.config.tima=1
Wanna buy me a beer? Head over here
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=JSS15J
ro.build.display.id=JSS15J.I337UCUEMJ6
ro.build.version.incremental=I337UCUEMJ6
ro.build.version.sdk=18
ro.build.version.codename=REL
ro.build.version.release=4.3
ro.build.date=Thu Oct 10 16:19:13 KST 2013
ro.build.date.utc=1381389553
ro.build.type=user
ro.build.user=se.infra
ro.build.host=R0301-14
ro.build.tags=release-keys
ro.product.model=SAMSUNG-SGH-I337
ro.product.brand=samsung
ro.product.name=jflteuc
ro.product.device=jflteatt
ro.product.board=MSM8960
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=msm8960
# ro.build.product is obsolete; use ro.product.device
ro.build.product=jflteatt
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=jflteuc-user 4.3 JSS15J I337UCUEMJ6 release-keys
ro.build.fingerprint=samsung/jflteuc/jflteatt:4.3/JSS15J/I337UCUEMJ6:user/release-keys
ro.build.characteristics=att
# Samsung Specific Properties
ro.build.PDA=I337UCUEMJ6
ro.build.hidden_ver=I337UCUEMJ6
ro.build.changelist=1849109
ro.product_ship=false
ro.chipname=apq8064
# end build properties
#
# system.prop for surf
#
rild.libpath=/system/lib/libsec-ril.so
ro.sf.lcd_density=480
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
debug.sf.hw=1
debug.composition.7x27A.type=mdp
debug.composition.7x25A.type=mdp
dalvik.vm.heapsize=24m
debug.composition.type=dyn
persist.hwc.mdpcomp.enable=true
service.camera.gpu.enable=0
#
# system props for the cne module
#
persist.cne.feature=0
#
# system props for the MM modules
#
media.stagefright.enable-player=true
media.stagefright.enable-meta=false
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.enable-commonsource=true
#
# system props for the LPA/TUNNEL
#
lpa.decode=false
tunnel.decode=true
lpa.use-stagefright=true
#
# system prop for opengles version
#
ro.opengles.version=196608
#
# system props for the data modules
#
ro.use_data_netmgrd=true
persist.data.ds_fmc_app.mode=0
#
# system props for IMS module
#
persist.ims.regmanager.mode=0
#
# system prop for requesting Master role in incoming Bluetooth connection.
#
ro.bluetooth.request.master=true
#
# system prop for Bluetooth FTP profile
#
ro.qualcomm.bluetooth.ftp=true
#
# system prop for Bluetooth SAP profile
#
ro.qualcomm.bluetooth.sap=true
#
# system prop for Bluetooth Auto connect for remote initated connections
#
ro.bluetooth.remote.autoconnect=true
#
#system property for Bluetooth discoverability timeout in seconds
#0: Always discoverable
#debug.bt.discoverable_time=0
#
# System prop to disable strict mode flash on display
#
persist.sys.strictmode.visual=false
#
# System prop to enable/disable OMH. Enabled by default
#
persist.omh.enabled=1
#System prop to enable ehrpd capability
ro.config.ehrpd=true
# System property for cabl
ro.qualcomm.cabl=0
#
#System prop to determine availability of
#analog fm path
#
ro.fm.analogpath.supported=true
#
#System property for FM transmitter
#
ro.fm.transmitter=false
#
#System property for single instance recording
#
ro.fm.mulinst.recording.support=false
#
#System property for msm
#
ro.hw_plat=7x27a
#
# system props for SD card emulation of emmc partition
#
ro.emmc.sdcard.partition=18
#
# system property to enforce Phone Mode view
#
ro.screen.layout=normal
#
# Turn off tiled rendering
#
debug.enabletr=false
#
#System prop for setting the pixel format
#
ro.staticwallpaper.pixelformat=RGB_565
#
#System prop for disabling the meta data mode for encoder
#
debug.camcorder.disablemeta=0
#
# Simulate sdcard on /data/media
#
persist.fuse_sdcard=true
#
# System prop for using landscape preview layout in camera
#
debug.camera.landscape=true
#
# System prop for capping scroll velocity
#
ro.max.fling_velocity=4000
#
#system prop for Bluetooth hci transport
#
ro.qualcomm.bt.hci_transport=smd
#
# System prop for Tvout/HDMI
#
persist.sys.camera.transform=0
persist.sys.camera.connect=0
persist.sys.videomode=0
ro.hdmi.enable=true
# System proverty for sys info indication
persist.radio.add_power_save=1
# System property for Default Brightness
ro.lcd_min_brightness=10
ro.lcd_brightness=143
# Keep SIM state on LPM mode
persist.radio.apm_sim_not_pwdn=1
# use se table when search list
persist.radio.use_se_table_only=1
# System prop for PLMN
persist.radio.fill_eons=1
# System prop for SPN
persist.radio.prefer_spn=0
#
# ADDITIONAL_BUILD_PROPERTIES
#
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=128m
dalvik.vm.heapsize=512m
dalvik.vm.heaputilization=0.25
dalvik.vm.heapidealfree=8388608
dalvik.vm.heapconcurrentstart=2097152
ro.vendor.extension_library=/system/lib/libqc-opt.so
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=512k
dalvik.vm.heapmaxfree=8m
ro.hwui.texture_cache_size=48
ro.hwui.layer_cache_size=32
ro.hwui.path_cache_size=8
ro.hwui.shape_cache_size=2
ro.hwui.gradient_cache_size=1
ro.hwui.drop_shadow_cache_size=4
ro.hwui.texture_cache_flush_rate=0.5
ro.hwui.text_small_cache_width=1024
ro.hwui.text_small_cache_height=512
ro.hwui.text_large_cache_width=2048
ro.hwui.text_large_cache_height=1024
ro.sec.fle.encryption=true
ro.hdcp2.rx=tz
ro.secwvk=144
ro.securestorage.support=true
ro.config.alarm_alert=Alarm_Morning_flower.ogg
ro.config.ringtone=ATT_Firefly_Default.ogg
ro.config.notification_sound=Whisper.ogg
ro.monkey=0
ro.error.receiver.default=com.samsung.receiver.error
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
persist.log.seclevel=1
persist.translation.assistant=0
ro.crypto.support=recovery_mount|others
ro.com.google.clientidbase=android-samsung
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.adb.qemud=1
ro.setupwizard.mode=OPTIONAL
ro.com.google.apphider=off
ro.com.google.clientidbase.ms=android-att-us
ro.com.google.clientidbase.am=android-att-us
ro.com.google.clientidbase.yt=android-samsung
ro.com.google.clientidbase.gmm=android-samsung
ro.com.google.gmsversion=4.3_r1
ro.kernel.qemu=0
ro.build.selinux=1
ro.config.tima=1
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.qc.sdk.izat.premium_enabled=0
persist.gps.qc_nlp_in_use=0
Click to expand...
Click to collapse
You da man!
System is failing to mount on my phone. everything else took bootloader, recovery ETC
if i install this fw, will i be able to downgrade later? any thought?
Hopefully leaking to a forum near you soon! (pending permission to leak)
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=KOT49H
ro.build.display.id=KOT49H.I337UCUFMLD
ro.build.version.incremental=I337UCUFMLD
ro.build.version.sdk=19
ro.build.version.codename=REL
ro.build.version.release=4.4.2
ro.build.date=Thu Jan 2 17:30:32 KST 2014
ro.build.date.utc=1388651432
ro.build.type=user
ro.build.user=dpi
ro.build.host=SWDC3404
ro.build.tags=release-keys
ro.product.model=SAMSUNG-SGH-I337
ro.product.brand=samsung
ro.product.name=jflteuc
ro.product.device=jflteatt
ro.product.board=MSM8960
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm8960
# ro.build.product is obsolete; use ro.product.device
ro.build.product=jflteatt
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=jflteuc-user 4.4.2 KOT49H I337UCUFMLD release-keys
ro.build.fingerprint=samsung/jflteuc/jflteatt:4.4.2/KOT49H/I337UCUFMLD:user/release-keys
ro.build.characteristics=att
# Samsung Specific Properties
ro.build.PDA=I337UCUFMLD
ro.build.hidden_ver=I337UCUFMLD
ro.build.changelist=232901
ro.product_ship=false
ro.chipname=apq8064
# end build properties
#
# from device/samsung/jflteatt/system.prop
#
#
# system.prop for surf
#
ro.sf.lcd_density=480
rild.libpath=/system/lib/libsec-ril.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=gpu
dalvik.vm.heapsize=36m
debug.enable.wl_log=1
persist.hwc.mdpcomp.enable=true
debug.mdpcomp.logs=0
#
# system props for the cne module
#
persist.cne.feature=0
lpa.decode=false
tunnel.decode=true
tunnel.audiovideo.decode=false
lpa.use-stagefright=true
qcom.hw.aac.encoder=true
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
media.aac_51_output_enabled=true
#33395 is sum of supported format flags in AAL
#Formats: AVI AC3 ASF AAC QCP DTS 3G2
mm.enable.qcom_parser=33395
#
# system props for the data modules
#
ro.use_data_netmgrd=true
persist.data.netmgrd.qos.enable=false
#system props for time-services
persist.timed.enable=true
# System props for audio
persist.audio.fluence.mode=endfire
persist.audio.vr.enable=false
persist.audio.handset.mic=digital
persist.audio.lowlatency.rec=false
# System prop to select audio resampler quality
af.resampler.quality=255
# System prop to select MPQAudioPlayer by default on mpq8064
mpq.audio.decode=true
#
# system prop for opengles version
#
# 196608 is decimal for 0x30000 to report version 3
ro.opengles.version=196608
# system prop for requesting Master role in incoming Bluetooth connection.
#
ro.bluetooth.request.master=true
#
# system prop for Bluetooth Auto connect for remote initated connections
#
ro.bluetooth.remote.autoconnect=true
# system property for Bluetooth discoverability time out in seconds
# 0: Always discoverable
#debug.bt.discoverable_time=0
#system prop for switching gps driver to qmi
persist.gps.qmienabled=true
#System prop to enable ehrpd capability
ro.config.ehrpd=true
# System property for cabl
ro.qualcomm.cabl=0
# System prop for sending transmit power request to RIL during WiFi hotspot on/off
#
ro.ril.transmitpower=true
#Simulate sdcard on /data/media
#
persist.fuse_sdcard=true
ro.hwui.text_cache_width=2048
#
# Supports warmboot capabilities
#
ro.warmboot.capability=1
#
#snapdragon value add features
#
ro.qc.sdk.audio.ssr=false
##fluencetype can be "fluence" or "fluencepro" or "none"
ro.qc.sdk.audio.fluencetype=none
ro.qc.sdk.camera.facialproc=true
ro.qc.sdk.gestures.camera=false
ro.qc.sdk.sensors.gestures=false
#property to check if dynamic resolution change is supported in framework
ro.streaming.video.drs=true
#property to enable user to access Google WFD settings.
persist.debug.wfd.enable=1
#property to choose between virtual/external wfd display
persist.sys.wfd.virtual=0
#system prop for setting rmnet mux mode
persist.rmnet.mux=disabled
#
# System prop for Tvout/HDMI
#
persist.sys.camera.transform=0
persist.sys.camera.connect=0
persist.sys.videomode=0
ro.hdmi.enable=true
# System property for Default Brightness
ro.lcd_min_brightness=10
ro.lcd_brightness=143
# System proverty for sys info indication
persist.radio.add_power_save=1
# Keep SIM state on LPM mode
persist.radio.apm_sim_not_pwdn=1
# use se table when search list
persist.radio.use_se_table_only=1
# System prop for PLMN
persist.radio.fill_eons=1
# System prop for SPN
persist.radio.prefer_spn=0
# Boot animation fps
boot.fps=25
media.enable-commonsource=true
#
# ADDITIONAL_BUILD_PROPERTIES
#
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=128m
dalvik.vm.heapsize=512m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
persist.log.seclevel=1
persist.translation.assistant=0
ro.vendor.extension_library=/vendor/lib/libqc-opt.so
ro.build.scafe=americano
ro.build.scafe.size=short
ro.build.scafe.shot=single
ro.hdcp2.rx=tz
ro.secwvk=144
ro.securestorage.support=true
security.mdpp=None
ro.security.mdpp.ver=1.0
ro.security.mdpp.release=1
security.mdpp.result=None
ro.security.mdpp.ux=Enabled
ro.sec.fle.encryption=true
ro.hwui.texture_cache_size=48
ro.hwui.layer_cache_size=32
ro.hwui.path_cache_size=8
ro.hwui.shape_cache_size=2
ro.hwui.gradient_cache_size=1
ro.hwui.drop_shadow_cache_size=4
ro.hwui.texture_cache_flush_rate=0.5
ro.hwui.text_small_cache_width=1024
ro.hwui.text_small_cache_height=512
ro.hwui.text_large_cache_width=2048
ro.hwui.text_large_cache_height=1024
ro.config.ringtone=ATT_Firefly_Default.ogg
ro.config.notification_sound=Whisper.ogg
ro.config.alarm_alert=Alarm_Morning_flower.ogg
ro.config.media_sound=Media_preview_Touch_the_light.ogg
ro.setupwizard.mode=OPTIONAL
ro.com.google.apphider=on
ro.com.google.clientidbase=android-samsung
ro.com.google.clientidbase.ms=android-att-us
ro.com.google.clientidbase.am=android-att-us
ro.com.google.clientidbase.yt=android-samsung
ro.com.google.clientidbase.gmm=android-samsung
ro.com.google.gmsversion=4.4_r1
persist.sys.dalvik.vm.lib=libdvm.so
ro.kernel.qemu=0
ro.build.selinux=1
ro.config.knox=1
ro.config.tima=1
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.qc.sdk.izat.premium_enabled=1
ro.qc.sdk.izat.service_mask=0x5
persist.gps.qc_nlp_in_use=0
ro.gps.agps_provider=1
wow. where did u get this from?
ksj0823 said:
wow. where did u get this from?
Click to expand...
Click to collapse
From my getting place
U done it again DG...... Awesome....:good:
Swyped from MK2 Dark Carnage SS Edition
Looks like I may be eating my words with my comment on our 4.4 being at least two months away.. guess I can't complain too much ;P
Fingers crossed. Thanks for the continued info/leaks over the years.
designgears said:
Hopefully leaking to a forum near you soon! (pending permission to leak)
Click to expand...
Click to collapse
Permission granted soldier:silly:
Woohoo!
Can't wait for this, didn't think an at&t build would be available for months..Someone grant permission
designgears said:
From my getting place
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
word
Guys if you don't care about flashing Roms and when this is released go ahead but if you wait for kexec for 4.3 you can flash any ROM you want.
Sent from my SCH-I545 using xda premium
[email protected] said:
Guys if you don't care about flashing Roms and when this is released go ahead but if you wait for kexec for 4.3 you can flash any ROM you want.
Sent from my SCH-I545 using xda premium
Click to expand...
Click to collapse
I agree, but for the as it stands right now we haven't gotten kexec to work... at least not publicly. A lot of the novice folks around here are losing their patience and want 4.4. Whereas most of power users that hung back on MF3 or updated to MK2 to test are biting at the bullet waiting for kexec to be implemented in Safestrap. I'm sure we'll see a fairly even split of users using this if the DG get's permission to post it.
Looks like this will be ATT Release and not a leak? To my untrained eye at least. It is not test-keys but release-keys. Hope you get the OK and we can get some Roms out of it... Thanks ahead of time.
Sent From My Spiderman,Ironman,Red,Dark Blue,Green, GreyedOut BadAss Themed I337
Capt said:
Are you going to extract the modem from this just like you have done with the rest?
Click to expand...
Click to collapse
I will try unless someone else beats me to it. It will depend on the file structure and if I will need to flash it or not. If I would have to flash the Odin file then it won't happen from me as I am not gonna give up my loki'd bootloaders.
Sent From My Spiderman,Ironman,Red,Dark Blue,Green, GreyedOut BadAss Themed I337
I'm so ready for this release. I have the leaked 4.4.2 on my note 3 and glad I took the jump. Now waiting for the s4 4.4.2.
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
F0rg0tt3n270 said:
I'm so ready for this release. I have the leaked 4.4.2 on my note 3 and glad I took the jump. Now waiting for the s4 4.4.2.
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Any noticeable improvement over 4.3 on your Note? Anything visual other than the status bar icons like battery and signal?
timmytim said:
Any noticeable improvement over 4.3 on your Note? Anything visual other than the status bar icons like battery and signal?
Click to expand...
Click to collapse
Not really anything visual. Seems like its all in the background as the speed is incredibly fast and less laggy. It runs very smooth with no fc's yet and no issues with sd card like others have said.
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
When do you think you will get permission to leak this? I am waiting patiently as 4.3 is really laggy.
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
Can't wait for this. ???
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Can anyone tell how to use loki patch for I337 MK2 4.3, I have read alot and cant figure it out. I have used Loki by Adam and did loki thru emulator but fails, I want out get out of this touch wis. Thanks
N9005ZHUENB1 Android 4.4.2 Kitkat
File Name:
AP_N9005ZHUENB1_529386_REV03_user_low_ship_MULTI_CERT.tar.md5
BL_N9005ZHUENB1_529386_REV03_user_low_ship_MULTI_CERT.tar.md5
CP_N9005ZHUENB1_529386_REV03_user_low_ship_MULTI_CERT.tar.md5
CSC_ZZH_N9005ZZHENB1_529386_REV03_user_low_ship_MULTI_CERT.tar.md5
HLTE_HKTW_OPEN_16G.pit
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download Link:http://pan.baidu.com/s/1gdkPciB
lqhorochi said:
N9005ZHUENB1 Android 4.4.2 Kitkat
File Name:
AP_N9005ZHUENB1_529386_REV03_user_low_ship_MULTI_CERT.tar.md5
BL_N9005ZHUENB1_529386_REV03_user_low_ship_MULTI_CERT.tar.md5
CP_N9005ZHUENB1_529386_REV03_user_low_ship_MULTI_CERT.tar.md5
CSC_ZZH_N9005ZZHENB1_529386_REV03_user_low_ship_MULTI_CERT.tar.md5
HLTE_HKTW_OPEN_16G.pit
Download Link:http://pan.baidu.com/s/1gdkPciB
Click to expand...
Click to collapse
Hi,
Have you installed this image? Downloading now, its a slow download!
Ash.
ash99 said:
Hi,
Have you installed this image? Downloading now, its a slow download!
Ash.
Click to expand...
Click to collapse
Good Catch ! What region is this ? thx
snout said:
Good Catch ! What region is this ? thx
Click to expand...
Click to collapse
Looks like Hong Kong due to the 16GB PIT file.
build.pro
I just tried to unpack the zip with kitchen and I got this build.pro
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=KOT49H
ro.build.display.id=KOT49H.N9005ZHUENB1
ro.build.version.incremental=N9005ZHUENB1
ro.build.version.sdk=19
ro.build.version.codename=REL
ro.build.version.release=[COLOR="Red"]4.4.2[/COLOR]
ro.build.date=Tue Jan 28 16:51:12 KST 2014
ro.build.date.utc=1390895472
ro.build.type=user
ro.build.user=dpi
ro.build.host=SWDD5811
ro.build.tags=release-keys
ro.product.model=SM-N9005
ro.product.brand=samsung
ro.product.name=[COLOR="Red"]hltezh[/COLOR]
ro.product.device=hlte
ro.product.board=MSM8974
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=msm8974
# ro.build.product is obsolete; use ro.product.device
ro.build.product=hlte
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=hltezh-user 4.4.2 KOT49H N9005ZHUENB1 release-keys
ro.build.fingerprint=samsung/hltezh/hlte:4.4.2/KOT49H/N9005ZHUENB1:user/release-keys
ro.build.characteristics=phone
# Samsung Specific Properties
ro.build.PDA=N9005ZHUENB1
ro.build.hidden_ver=N9005ZHUENB1
ro.build.changelist=[COLOR="Red"]529386[/COLOR]
ro.product_ship=true
ro.chipname=MSM8974
[COLOR="Red"]ro.build.knox.container=[/COLOR]
# end build properties
#
# from device/samsung/hlte/system.prop
#
#
# system.prop for msm8974
#
ro.sf.lcd_density=480
rild.libpath=/system/lib/libsec-ril.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
# Start in cdma mode
#ro.telephony.default_network=5
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=c2d
persist.hwc.mdpcomp.enable=true
debug.disable.bwc=1
debug.mdpcomp.logs=0
dalvik.vm.heapsize=36m
dev.pm.dyn_samplingrate=1
persist.demo.hdmirotationlock=false
ro.hdmi.enable=true
tunnel.decode=true
tunnel.audiovideo.decode=true
lpa.decode=false
lpa.use-stagefright=true
persist.speaker.prot.enable=false
qcom.hw.aac.encoder=true
#
# system props for the cne module
#
persist.cne.feature=0
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
mm.enable.smoothstreaming=true
media.aac_51_output_enabled=true
#37491 is decimal sum of supported codecs in AAL
#codecs: AVI AC3 ASF AAC QCP DTS 3G2 MP2TS
mm.enable.qcom_parser=37491
# VIDC: debug_levels
# 1:ERROR 2:HIGH 4:LOW 0:NOLOGS 7:AllLOGS
vidc.debug.level=1
#
# system props for the data modules
#
# RIL team modification
# netmgrd should be false in EVO-RIL model
ro.use_data_netmgrd=false
# RIL team modification
# qos will temporary false while supporting qos in EVO-RIL.
persist.data.netmgrd.qos.enable=false
ro.data.large_tcp_window_size=true
#system props for time-services
persist.timed.enable=true
#
# system prop for opengles version
#
# 196608 is decimal for 0x30000 to report version 3
ro.opengles.version=196608
# System property for cabl
ro.qualcomm.cabl=1
#
# System props for telephony
# System prop to turn on CdmaLTEPhone always
telephony.lteOnCdmaDevice=0
#Simulate sdcard on /data/media
#
persist.fuse_sdcard=true
# System proverty for sys info indication
persist.radio.add_power_save=1
#
#snapdragon value add features
#
ro.qc.sdk.audio.ssr=false
##fluencetype can be "fluence" or "fluencepro" or "none"
ro.qc.sdk.audio.fluencetype=none
persist.audio.fluence.voicecall=true
persist.audio.fluence.voicerec=false
persist.audio.fluence.speaker=true
ro.qc.sdk.sensors.gestures=true
ro.qc.sdk.gestures.camera=false
ro.qc.sdk.camera.facialproc=false
#property to enable user to access Google WFD settings.
persist.debug.wfd.enable=1
#property to choose between virtual/external wfd display
persist.sys.wfd.virtual=0
tunnel.audio.encode = true
#use VERY_HIGH_QUALITY for audio resampler
af.resampler.quality=4
# System property for storage_preload
persist.sys.storage_preload=1
#SLook
ro.slook.ver=1
#
# ADDITIONAL_BUILD_PROPERTIES
#
persist.sys.logkit.ctrlcode=0
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
ro.com.google.clientidbase=android-samsung
ro.vendor.extension_library=/vendor/lib/libqc-opt.so
persist.radio.apm_sim_not_pwdn=1
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=128m
dalvik.vm.heapsize=512m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
ro.build.scafe=americano
ro.build.scafe.size=short
ro.build.scafe.shot=double
ro.sec.fle.encryption=true
ro.hdcp2.rx=tz
media.enable-commonsource=true
ro.secwvk=144
ro.securestorage.support=true
security.mdpp=None
ro.security.mdpp.ver=1.0
ro.security.mdpp.release=2
security.mdpp.result=None
ro.hwui.texture_cache_size=48
ro.hwui.layer_cache_size=32
ro.hwui.path_cache_size=8
ro.hwui.shape_cache_size=2
ro.hwui.gradient_cache_size=1
ro.hwui.drop_shadow_cache_size=4
ro.hwui.texture_cache_flush_rate=0.5
ro.hwui.text_small_cache_width=1024
ro.hwui.text_small_cache_height=512
ro.hwui.text_large_cache_width=2048
ro.hwui.text_large_cache_height=1024
ro.error.receiver.default=com.samsung.receiver.error
ro.config.ringtone=Over_the_horizon.ogg
ro.config.notification_sound=S_Whistle.ogg
ro.config.alarm_alert=Alarm_Morning_flower.ogg
ro.config.media_sound=Media_preview_Touch_the_light.ogg
ro.security.mdpp.ux=Enabled
ro.setupwizard.mode=DISABLED
ro.com.google.gmsversion=4.4.2_r1
persist.sys.dalvik.vm.lib=libdvm.so
ro.build.selinux=1
ro.kernel.qemu=0
ro.config.tima=1
[COLOR="red"]ro.config.knox=1[/COLOR]
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.qc.sdk.izat.premium_enabled=0
ro.qc.sdk.izat.service_mask=0x0
persist.gps.qc_nlp_in_use=0
ro.gps.agps_provider=1
kmokhtar79 said:
I just tried to unpack the zip with kitchen and I got this build.pro
Click to expand...
Click to collapse
Safe to flash on Note 3 UK?
ama3654 said:
Safe to flash on Note 3 UK?
Click to expand...
Click to collapse
I don't know but Note 3 Hong Kong version is 16 GB and has different PIT. I think your phone would stuck in flashing process.
Sent from my SM-N9005
Hi,
Flashed in a 16GB HK phone but same problems. Camera and phone not working and lots of crashes...
j0rd1l0p3z said:
Hi,
Flashed in a 16GB HK phone but same problems. Camera and phone not working and lots of crashes...
Click to expand...
Click to collapse
What is your phone version is it Hong Kong 16 GB version or 32?
kmokhtar79 said:
What is your phone version is it Hong Kong 16 GB version or 32?
Click to expand...
Click to collapse
As I said in my post, is the 16GB version. Bought in HK, in a shop not online.
Samsung Note 3 Region Taiwan Softbrick UDC START
lqhorochi said:
N9005ZHUENB1 Android 4.4.2 Kitkat
File Name:
AP_N9005ZHUENB1_529386_REV03_user_low_ship_MULTI_CERT.tar.md5
BL_N9005ZHUENB1_529386_REV03_user_low_ship_MULTI_CERT.tar.md5
CP_N9005ZHUENB1_529386_REV03_user_low_ship_MULTI_CERT.tar.md5
CSC_ZZH_N9005ZZHENB1_529386_REV03_user_low_ship_MULTI_CERT.tar.md5
HLTE_HKTW_OPEN_16G.pit
Download Link:http://pan.baidu.com/s/1gdkPciB
Click to expand...
Click to collapse
i am having problem "Samsung Note 3 Region Taiwan Softbrick UDC START"
can i use this ROM?
and does it trigger knox?
Thank you for helping..
ama3654 said:
Safe to flash on Note 3 UK?
Click to expand...
Click to collapse
kmokhtar79 said:
I don't know but Note 3 Hong Kong version is 16 GB and has different PIT. I think your phone would stuck in flashing process.
Sent from my SM-N9005
Click to expand...
Click to collapse
Most def would not flash this on any device other than a HK one, or it will brick it.
j0rd1l0p3z said:
Hi,
Flashed in a 16GB HK phone but same problems. Camera and phone not working and lots of crashes...
Click to expand...
Click to collapse
Did you try a full reset after you install it? I mean factory reset including full erase the internal(built in memory card) memory.
Can I flash this with odin in my 32GB N9005? Base rom was from HK rom 4.3 and then I flashed Omega 6.0 (4.3) without wipe and using it now:
Country of Origin:
Vietnam
Product Code:
SM-N9005ZKETGY
Sales Code (aka Region Code):
TGY/EUR
CSC Country ISO:
GR
Bootloader Version:
N9005XXUBMI7
Baseband Version:
N9005ZHUDMJ9
Build Number:
Omega v6.0 - XXUDML2 (N9005XXUDML2)
XOLO q3000
Can I flash the same on XOLO q3000 which have Mediatek MT6589T and 5.7 display
kmokhtar79
kmokhtar79 said:
I don't know but Note 3 Hong Kong version is 16 GB and has different PIT. I think your phone would stuck in flashing process.
Sent from my SM-N9005
Click to expand...
Click to collapse
what about mine?
i am having problem "Samsung Note 3 Region Taiwan Softbrick UDC START"
can i use this ROM?
and does it trigger knox?
Thank you for helping..
i realise that only Region Taiwan firmware and hongkong are compatible
Taiwan ZTU
Hongkong ZHU
If you are not going to root and keep you Knox status in 0×0 I suggest waiting for official firmware that supports your device.
Sent from my SM-N9005
Sent from my SM-N9005
thank You
kmokhtar79 said:
If you are not going to root and keep you Knox status in 0×0 I suggest waiting for official firmware that supports your device.
Sent from my SM-N9005
Sent from my SM-N9005
Click to expand...
Click to collapse
Thank you very much, but i not sure when will be the official, cause i am having a soft-bricked phone.. it is very annoying..
[successful] Note 3 Taiwan 16GB Survive UDC START problem
budi_west said:
Thank you very much, but i not sure when will be the official, cause i am having a soft-bricked phone.. it is very annoying..
Click to expand...
Click to collapse
[successful] Note 3 Taiwan 16GB Survive UDC START problem
I have downloaded N9005ZHUENB1 and flashed to my Samsung note 3 Taiwan 16GB , succeed
I Survive
My Samsung Galaxy Note 3 Taiwan Region 16GB is UP and On Testing
my problem is odin mode with new line "UDC START"
hope this can help somebody
budi_west said:
[successful] Note 3 Taiwan 16GB Survive UDC START problem
I have downloaded N9005ZHUENB1 and flashed to my Samsung note 3 Taiwan 16GB , succeed
I Survive
My Samsung Galaxy Note 3 Taiwan Region 16GB is UP and On Testing
my problem is odin mode with new line "UDC START"
hope this can help somebody
Click to expand...
Click to collapse
That's great, and would you please tell us whether you selected all files, because I can see there are 5 files already in download zip:
AP_N9005ZHUENB1_529386_REV03_user_low_ship_MULTI_CERT.tar
BL_N9005ZHUENB1_529386_REV03_user_low_ship_MULTI_CERT.tar
CP_N9005ZHUENB1_529386_REV03_user_low_ship_MULTI_CERT.tar
CSC_ZZH_N9005ZZHENB1_529386_REV03_user_low_ship_MULTI_CERT.tar
HLTE_HKTW_OPEN_16G.pit
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3.35.401.12:
M9 3.35.401.12 System DUMP
M9 3.35.401.12 boot.img
M9 3.35.401.12 recovery.img
Do what you want with the files, if you rebase on them, credit me. Thanks.
2.10.401.1:
M9 2.10.401.1 System DUMP
M9 2.10.401.1 boot.img
M9 2.10.401.1 recovery.img
Do what you want with the files, if you rebase on them, credit me. Thanks.
1.40.401.8:
M9 1.40.401.8 System DUMP
M9 1.40.401.8 boot.img
M9 1.40.401.8 recovery.img
Do what you want with the files, if you rebase on them, credit me. Thanks.
1.32.401.17:
M9 1.32.401.17 System DUMP
M9 1.32.401.17 boot.img
M9 1.32.401.17 recovery.img
Do what you want with the files, if you rebase on them, credit me. Thanks.
1.32.401.15:
M9 1.32.401.15 System DUMP
M9 1.32.401.15 boot.img
M9 1.32.401.15 recovery.img
Do what you want with the files, if you rebase on them, credit me. Thanks.
Nice man.. saved me a job, was going to up tonight, dumped yesterday ?
LeeDroid said:
Nice man.. saved me a job, was going to up tonight, dumped yesterday
Click to expand...
Click to collapse
No problem
1.32.401.15? Mine is 1.32.161.15
Are 401 and 161 minor changes or "info" about provider-device (ger, vodafone)
baddevil2 said:
1.32.401.15? Mine is 1.32.161.15
Are 401 and 161 minor changes or "info" about provider-device (ger, vodafone)
View attachment 3234404
Click to expand...
Click to collapse
Minor and region specific, 401 is the generic Europe build
Thank you
baddevil2 said:
1.32.401.15? Mine is 1.32.161.15
Are 401 and 161 minor changes or "info" about provider-device (ger, vodafone)
View attachment 3234404
Click to expand...
Click to collapse
It's the same rom, nothing but Vodafone is yours
start down。。。。。。thx
SoLdieR9312 said:
Hey guys,
i just dumped my 1.32.401.15 system.
Its not a flashable, only system folder.
No missing files, system image got pulled from device!
Code:
ro.com.google.clientidbase=android-htc-rev
ro.product.locale.language=en
ro.product.locale.region=US
ro.telephony.default_network=0
ro.product.model=HTC One M9
ro.ril.vmail.23415=1571,BT,121,VDF UK
ro.ril.vmail.27203=171
ro.ril.vmail.65502=181
ro.ril.vmail.27211=171
ro.ril.vmail.65510=100
ro.ril.vmail.22299=4133,3ITA
ro.ril.vmail.23410=901,O2 UK,905,TESCO,443,giffgaff
ro.ril.vmail.22201=41901,I TIM
ro.ril.vmail.22210=42020,Vodafone IT
ro.ril.vmail.22288=4200,I WIND
ro.ril.vmail.20801=888
ro.ril.vmail.20810=123
ro.ril.vmail.20826=777
ro.ril.vmail.42403=161
ro.config.htc.enableCOTA=1
ro.ril.enable.a52=0
ro.ril.enable.a53=1
ro.ril.enable.dtm=0
ro.ril.enable.gea3=1
ro.ril.enable.amr.wideband=1
ro.ril.enable.managed.roaming=1
ro.ril.enable.sdr=1
ro.ril.show.all.plmn=1
ro.ril.air.enabled=1
ro.ril.gsm.to.lte.blind.redir=1
ro.ril.enable.isr=1
ro.ril.ltefgi=2131754172
ro.ril.lte3gpp=69
ro.ril.ltefgi.rel9=3229614080
ro.ril.fast.dormancy.rule=1
ro.ril.gsm.amrwb=1
ro.ril.enable.enhance.search=1
ro.ril.esm.blacklist=22601,26806,26801,21403,42502,25007,25054,25027
ro.telephony.bl=27202
ro.ril.hsxpa=5
ro.ril.hsdpa.category=24
ro.ril.hsupa.category=6
ro.ril.disable.cpc=1
dev.defaultwallpaper=/system/customize/resource/wallpapers_00.jpg
ro.ril.n-roaming.mcclist=219,204,234,272,222,240,232,238,260,425
ro.ril.ltefgi.rel10=1747320832
# begin build properties
# autogenerated by buildinfo.sh
htc.build.stage=2
ro.aa.customizationid=3016534
ro.aa.romver=1.32.401.15
ro.aa.maincid=HTC__001
ro.prot=true
ro.aa.cidlist=HTC__001,HTC__J15,HTC__031,HTC__102,HTC__A07,HTC__032,HTC__M27,HTC__016,HTC__002,HTC__Y13
ro.aa.modelid=0PJA10000
ro.aa.report=com
ro.aa.project=HIMA_UHL_L50_SENSE70
ro.aa.skulist=401
ro.aa.taskid=426888
ro.aa.mainsku=401
ro.aa.rid=1486
ro.onecid=
ro.cwkey=HTC__001
ro.build.id=LRX22G
ro.build.display.id=LRX22G release-keys
ro.build.version.incremental=506785.15
ro.build.version.sdk=21
ro.build.version.codename=REL
ro.build.version.all_codenames=REL
ro.build.version.release=5.0.2
ro.build.date=六 3月 21 09:23:44 CST 2015
ro.build.date.utc=1426901024
ro.build.type=user
ro.build.user=buildteam
ro.build.host=ABM102
ro.build.tags=release-keys
ro.product.model=MSM8994 for arm64
ro.product.brand=htc
ro.product.name=himauhl_htc_europe
ro.product.device=htc_himauhl
ro.product.board=msm8994
# ro.product.cpu.abi and ro.product.cpu.abi2 are obsolete,
# use ro.product.cpu.abilist instead.
ro.product.cpu.abi=arm64-v8a
ro.product.cpu.abilist=arm64-v8a,armeabi-v7a,armeabi
ro.product.cpu.abilist32=armeabi-v7a,armeabi
ro.product.cpu.abilist64=arm64-v8a
ro.product.manufacturer=HTC
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm8994
# ro.build.product is obsolete; use ro.product.device
ro.build.product=htc_himauhl
# Do not try to parse description, fingerprint, or thumbprint
ro.build.description=1.32.401.15 CL506785 release-keys
ro.build.fingerprint=htc/himauhl_htc_europe/htc_himauhl:5.0.2/LRX22G/506785.15:user/release-keys
ro.build.characteristics=default
ro.build.description=1.32.401.15 CL506785 release-keys
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=1.32.401.15 CL506785 release-keys
ro.build.changelist=506785
ro.build.project=HIMA_UHL_L50_SENSE70:426888
ro.build.sku=HTC Europe
ro.build.buildline=HIMAUHL_HTC_WWE_L50_CRC_Sense70_Stable
ro.product.version=1.32.401.15
ro.build.languageremove=
ro.build.sense.version=7.0
keyguard.no_require_sim=1
ro.build.version.htcsdk=HTCExt:HTCExtension_HDKBase_19.3;SDK:1.0;hdkbase:19.3
# end build properties
#
# from device/qcom/msm8994/system.prop
#
#
# system.prop for plutonium
#
rild.libpath=/system/lib64/libhtc_rilhook.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
#+SSD_RIL: remove QCT default_network for customize
# Start in global mode
#ro.telephony.default_network=10
#-SSD_RIL
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=c2d
persist.hwc.mdpcomp.enable=true
#persist.mdpcomp.4k2kSplit=1
persist.hwc.mdpcomp.maxpermixer=5
persist.mdpcomp_perfhint=50
debug.mdpcomp.logs=0
persist.metadata_dynfps.disable=true
persist.hwc.ptor.enable=true
dalvik.vm.heapsize=36m
dev.pm.dyn_samplingrate=1
persist.demo.hdmirotationlock=false
ro.hdmi.enable=true
persist.speaker.prot.enable=false
#0 is default(30 min)
persist.spkr.cal.duration=0
qcom.hw.aac.encoder=true
# system props for inscreen virtual key
qemu.hw.mainkeys=0
#
# system props for the cne module
#
persist.cne.feature=1
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
mm.enable.smoothstreaming=true
media.aac_51_output_enabled=true
#3314291: Decimal sum after adding FLAC parser flag 131072
#37491 is decimal sum of supported codecs in AAL
#codecs: DivX DivXHD AVI AC3 ASF AAC QCP DTS 3G2 MP2TS
mm.enable.qcom_parser=3183219
# Enable AwesomePlayer stats
persist.debug.sf.statistics=1
# Print clip name being played
media.stagefright.log-uri=1
# VIDC: debug_levels
# 1:ERROR 2:HIGH 4:LOW 0:NOLOGS 7:AllLOGS
vidc.debug.level=1
# Additional i/p buffer in case of encoder DCVS
vidc.enc.dcvs.extra-buff-count=2
#
# system props for the data modules
#
ro.use_data_netmgrd=true
persist.data.netmgrd.qos.enable=true
persist.data.mode=concurrent
ro.data.large_tcp_window_size=true
#system props for time-services
persist.timed.enable=true
#
# system prop for opengles version
#
# 196608 is decimal for 0x30000 to report major/minor versions as 3/0
# 196609 is decimal for 0x30001 to report major/minor versions as 3/1
ro.opengles.version=196609
# System property for cabl
ro.qualcomm.cabl=2
#
# System props for telephony
# System prop to turn on CdmaLTEPhone always
telephony.lteOnCdmaDevice=1
#
# System props for bluetooth
# System prop to turn on hfp client
bluetooth.hfp.client=1
#Simulate sdcard on /data/media
#
persist.fuse_sdcard=true
# ro.storage_structure: define the storage structure of this project
# FUSE: 0x8, FAT: 0x4, SD: 0x2, INS: 0x1
# Example: If the project has FUSE with SD card, the value should be defined as 10 (dec)
ro.storage_structure = 10
# ro.storage_encryption_type: define the storage encryption type of this project
# not support encryption: 0x0 block level: 0x1 file level: 0x2
ro.storage_encryption_type = 2
#For usb storage
ro.usb_host = 1
#system prop for Bluetooth SOC type
qcom.bluetooth.soc=rome
#system prop for A4WP profile support
ro.bluetooth.a4wp=true
#system prop for wipower support
ro.bluetooth.wipower=true
#
#snapdragon value add features
#
ro.qc.sdk.audio.ssr=false
##fluencetype can be "fluence" or "fluencepro" or "none"
ro.qc.sdk.audio.fluencetype=none
persist.audio.fluence.voicecall=true
persist.audio.fluence.voicerec=false
persist.audio.fluence.speaker=true
ro.qc.sdk.sensors.gestures=true
ro.qc.sdk.gestures.camera=false
ro.qc.sdk.camera.facialproc=false
#property to enable user to access Google WFD settings.
persist.debug.wfd.enable=1
#property to choose between virtual/external wfd display
persist.sys.wfd.virtual=0
tunnel.audio.encode = false
#enable gapless by default
audio.offload.gapless.enabled=true
#Buffer size in kbytes for compress offload playback
audio.offload.buffer.size.kb=32
#Enable offload audio video playback by default
av.offload.enable=true
#Disable 16 bit PCM offload by default
audio.offload.pcm.16bit.enable=false
#Enable 24 bit PCM offload by default
audio.offload.pcm.24bit.enable=true
#property to enable VDS WFD solution
persist.hwc.enable_vds=0
# enable navigation bar
qemu.hw.mainkeys=0
#enable voice path for PCM VoIP by default
use.voice.path.for.pcm.voip=true
#selects CoreSight configuration to enable
persist.debug.coresight.config=none
#System property for FM transmitter
ro.fm.transmitter=false
audio.offload.passthrough=false
audio.offload.multiple.enabled=true
#
# from device/htc/common/system.prop
#
#
# system.prop for HTC common
#
# Support HW rest
ro.product.hwreset = 1
ro.product.hwreset.timer1 = 6
ro.product.hwreset.timer2 = 9
ro.hardware.power = htc
# Use 4 thread to improve dex2oat time
dalvik.vm.dex2oat-thread_count=4
#
# from device/htc/htc_hima/system.prop
#
#
# system.prop for htc_hima
#
#
# system props for display
#
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=gpu
persist.hwc.mdpcomp.enable=true
ro.hwui.renderer.disable_opaque=true
ro.sf.lcd_density=480
debug.mdpcomp.logs=0
# Display Info
ro.product.display_resolution = 5 inch 1080p resolution
#
# system prop for opengles version
#
# 196608 is decimal for 0x30000 to report version 3
ro.opengles.version=196608
#+SSD_RIL
# for rmt_storage
ro.baseband.arch=msm
persist.radio.process_sups_ind=1
#-SSD_RIL
# HTC WLAN
wifi.interface=wlan0
wifi.supplicant_scan_interval=15
wifi.softap.interface=wlan0
wifi.softapconcurrent.interface=wl0.1
persist.wifi.v6=true
persist.wifi.v6.rs.count=5
persist.wifi.v6.rs.timeout=5
ro.product.wifi = 802.11 a/b/g/n/ac
#
# System props for audio
#
# System props for soundhound
# bit 0: Music playback in headset mode
# bit 1: FM 48K
persist.htc.audio.soundhound=1
# System prop to select audio resampler quality
af.resampler.quality=4
#Buffer size in kbytes for compress offload playback
audio.offload.buffer.size.kb=1024
#Enable offload gapless
audio.offload.gapless.enabled=false
# System props for global effect
htc.audio.global.state=0
htc.audio.global.profile=0
htc.audio.q6.topology=0
htc.audio.global.speaker=1
# System props for Dolby
dmid=-1286820014
audio.ds1.metainfo.key=273
#HTC Bluetooth
ro.bt.bdaddr_path = /sys/module/htc_bdaddress/parameters/bdaddress
service.brcm.bt.wbs = 1
# Hardware info - Bluetooth
ro.bt.chipset = Broadcom BCM4356
ro.bt.profiles = 12806403
ro.bt.stack.version = 3.0
ro.bt.stack = Broadcom AFBT
ro.bt.version = 4.1
ro.product.bluetooth=4.1
#
# System props for telephony
# System prop to turn off CdmaLTEPhone always
telephony.lteOnCdmaDevice=0
#
# ADDITIONAL_BUILD_PROPERTIES
#
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=192m
dalvik.vm.heapsize=512m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
keyguard.no_require_sim=true
ro.com.android.dataroaming=false
ro.com.android.dateformat=MM-dd-yyyy
ro.config.ringtone=Ring_Synth_04.ogg
ro.config.notification_sound=pixiedust.ogg
ro.carrier=unknown
ro.config.alarm_alert=Alarm_Classic.ogg
drm.service.enabled=true
ro.setupwizard.mode=OPTIONAL
ro.com.google.gmsversion=5.0_r2
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.adb.qemud=1
ro.vendor.extension_library=libqti-perfd-client.so
persist.radio.apm_sim_not_pwdn=1
persist.preload.common=0
persist.zygote.preload_threads=3
persist.camera.antibanding=50
persist.camera.tuning_spec=htc
ro.htc.bluetooth.sap=true
ro.telephony.default_network=9
persist.radio.sap_silent_pin=1
persist.sys.dalvik.vm.lib.2=libart.so
dalvik.vm.isa.arm64.features=div
dalvik.vm.isa.arm.features=div
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
persist.gps.qc_nlp_in_use=1
persist.loc.nlp_name=com.qualcomm.location
ro.gps.agps_provider=1
ro.pip.gated=0
M9 1.32.401.15 System DUMP - Download provided by renovate-themes.de
M9 1.32.401.15 boot.img - Download provided by renovate-themes.de
M9 1.32.401.15 recovery.img - Download provided by renovate-themes.de
Do what you want with the files, if you rebase on them, credit me. Thanks.
Click to expand...
Click to collapse
You can META-INF to install system.dum?,thanks
jureca said:
You can META-INF to install system.dum?,thanks
Click to expand...
Click to collapse
Sorry, only system dump, no rom dev..
SoLdieR9312 said:
Sorry, only system dump, no rom dev..
Click to expand...
Click to collapse
You can give one to install?,thanks
jureca said:
You can give one to install?,thanks
Click to expand...
Click to collapse
I already told ya, i'm not a rom developer, download .15 ruu and flash back to stock if you need.
SoLdieR9312 said:
I already told ya, i'm not a rom developer, download .15 ruu and flash back to stock if you need.
Click to expand...
Click to collapse
Ok, I need S-OFF'm from Vodafone and can not RUU EU, thanks anyway ?.
jureca said:
Ok, I need S-OFF'm from Vodafone and can not RUU EU, thanks anyway ?.
Click to expand...
Click to collapse
Once your s off you can super cid and flash what you like
fastboot oem writecid 11111111
Sunshine should be with us very soon
SoLdieR9312 said:
I already told ya, i'm not a rom developer, download .15 ruu and flash back to stock if you need.
Click to expand...
Click to collapse
Can put an updater together for you If you like J
LeeDroid said:
Can put an updater together for you If you like J
Click to expand...
Click to collapse
If you can do, i will post a flashable dump here.
LeeDroid said:
Once your s off you can super cid and flash what you like
fastboot oem writecid 11111111
Sunshine should be with us very soon
Click to expand...
Click to collapse
Yes, but I need it because I have problems with Wi-Fi and free Rom, I had to go back to Vodafone rom,I need S-OFF
---------- Post added at 08:08 PM ---------- Previous post was at 08:07 PM ----------
[/COLOR]
SoLdieR9312 said:
If you can do, i will post a flashable dump here.
Click to expand...
Click to collapse
Ok, thanks ?.
@SoLdieR9312 mate can you also provide a .17 system dump maybe?
kangconsumer said:
@SoLdieR9312 mate can you also provide a .17 system dump maybe?
Click to expand...
Click to collapse
Please don't post it all over xda.. Will do when i get time for that.
Thanks for the great work SoLdieR9312
.odex files for below list of files are missing.
android.policy.jar
apache-xml.jar
bouncycastle.jar
com.google.android.maps.jar
com.google.android.media.effects.jar
com.qti.dpmframework.jar
com.qti.snapdragon.sdk.display.jar
conscrypt.jar
core-junit.jar
core-libart.jar
dolby_ds.jar
dpmapi.jar
ext.jar
framework.jar
HTCCommonctrl.jar
HTCDev.jar
HTCExtension.jar
HtcLegacy.jar
ims-common.jar
imscmlibrary.jar
mms-common.jar
okhttp.jar
telephony-common.jar
voip-common.jar
wifi-wfdservice.jar