Hello , i m using revoA but it reboots constantly and after one of them all , my phone doesnt want to boot , i have reflashed the rom about 3 times (full wipe before and after) but always happens the same :c
Edit: now , i have downgraded it to the release version
Sent from my HTC-Desire using xda premium
initial release is far better than Revo..
Sent from my GT-S5670 using xda premium
Any other reply?
Sent from my HTC-Desire using xda premium
I also read these feedback flash old version new gonna come out soon wait for that
Sent from my LT18i using xda premium
there is no solution for this. u have to try initial a
danoich said:
Hello , i m using revoA but it reboots constantly and after one of them all , my phone doesnt want to boot , i have reflashed the rom about 3 times (full wipe before and after) but always happens the same :c
Edit: now , i have downgraded it to the release version
Sent from my HTC-Desire using xda premium
Click to expand...
Click to collapse
Can I get a link with CyanMobile Initial A? Please .
L.E: I just found out the LINK. Thanks anyway..
danoich said:
Hello , i m using revoA but it reboots constantly and after one of them all , my phone doesnt want to boot , i have reflashed the rom about 3 times (full wipe before and after) but always happens the same :c
Edit: now , i have downgraded it to the release version
Sent from my HTC-Desire using xda premium
Click to expand...
Click to collapse
revo a doesnt reboot trust me, it need proper instalation, squad said once to format sd card outside phone, clean fat 32 then flash clean gb rom via odin, in gb rom format sd card again and do horizontal calibration , then flash cwm, do full wipe data cache then flash revo a , full wipe again, reboot, go in cwm , partition sd card via cwm chose what u want , do full wipe of rom , flash video and bluetooth update reboot , without wipe afther flashing video and bluetooth update.
in phone, remove use jit , remove use surface dithering, remove compcache to 0 , use 16 bit transp , scroolin cache force disable, vm heap size to 32 or 48 , memory managment hard multitasking, i/o - sio , governor smartass v2 245-604++ what u want max , dont touch min freq when screen of in smartassv2 , kernel samepae scan 2500 , other thing to 512 , check to use ksm
display settings ceck bravia engine . reboot
u wont get singe reboot , and i know it doesnt matter but quadrant score on 604 i got 1950 , enjoy , update should come soon.
djozaa said:
revo a doesnt reboot trust me, it need proper instalation, squad said once to format sd card outside phone, clean fat 32 then flash clean gb rom via odin, in gb rom format sd card again and do horizontal calibration , then flash cwm, do full wipe data cache then flash revo a , full wipe again, reboot, go in cwm , partition sd card via cwm chose what u want , do full wipe of rom , flash video and bluetooth update reboot , without wipe afther flashing video and bluetooth update.
in phone, remove use jit , remove use surface dithering, remove compcache to 0 , use 16 bit transp , scroolin cache force disable, vm heap size to 32 or 48 , memory managment hard multitasking, i/o - sio , governor smartass v2 245-604++ what u want max , dont touch min freq when screen of in smartassv2 , kernel samepae scan 2500 , other thing to 512 , check to use ksm
display settings ceck bravia engine . reboot
u wont get singe reboot , and i know it doesnt matter but quadrant score on 604 i got 1950 , enjoy , update should come soon.
Click to expand...
Click to collapse
Will try this weekend , thanks!
Sent from my HTC-Desire using xda premium
Related
hello, i decided to make guide and also to tell peoples more about this great scripts.
all thanks goes to zeppelinrox!!!!!
original thread http://forum.xda-developers.com/showthread.php?t=991276
a bit messy, thats why i decide to make guide , so peoples are not scared when see wall of text
for past few weeks i was testing all possible scripts , lagfreev1 , v3 , tweakzv5 , allinone , sick etc.
and to be honest, its bull****, all what those scripts give are placebo efects. they dont eaven have proper premissions to run, meaning they do nothing .
script to work must have rwe re re , or all cheched .!!! not rw r r
Now back to theme .
V6 supercharger + kak is only script that i noticed that work evry reboot, and actualy do what it says.!!
how to install :
u need to have busybox version 1.18.2 , download from market busybox installer, chose version 1.18.2 and install
second u need to have script manager , download for market .
steps :
1. when u run script manager, chose browse as root!!
Press MENU then MORE and Advance Options then Config. CHECK Browser as root and press back.
2. find script in sd card. press on it, chose green buton skulls and bones aka superuser . NOT RUN AS BOOT!! when its green, press RUN
3. now u are asked if u wana BUILD.prop or LOCAL.prop . LOCAL.prop is safer but i had problems reaching 100% supercharged that way, so i evrytime run BUILD.prop , there is no risk, becouse script make backup automaticaly!
4. now script ask if your launcher is locked to memory , IT SHOULDNT BE , but u can change that later , just press what u have yes or no
5. now in driver options u press 1, to check your status , there will be sugestions of how to chose , supercharge lvl etc,
6. afther that u press 10 , You are given the minfrees values of "6, 8, 30, 36, 41, 47". If the values are like this. Then press Yes.
7. now follow what script says, it will put your launcher as hard to kill or Die hard , set minefree vaules and suggest u to restart phone, since this is your first time, u should chose superclean and reebot, so it delete your dalvik and u have fresh phone!
8. afther reboot run script again from sd card folder , u should be 100% supercharged and launcher hard to kill or die hard . if not , chose re
supercharge
9. if 100% u can chose Nitro Lag Nullifer , it will make phone eaven smoother option 20.
10. now chose option 18 . the Engine Flush. It will flash your RAM but not like the Task Manager where it closes your application or it will close your 3rd Party Keyboard and etc. This ENGINE FLUSH is a good way if u experience lag but you have still an ample amount of RAM. In short, you can make a habit of this to run anytime you experience LAG.
11. pick option 31 to stop script
11. NOW IMPORTANT THING FOR STOCK ROMS . u can run this script BUT u have to be rooted. AND u have to go in script manager to folder data/99supercharger.sh. Press on it , and chose options run as root (green) and run as boot (blue)
12. Custom roms dont do that becouse script is in init.d folder , witch execute script automaticaly.
Now reboot again and run script again from sd card , one that u run first time, to make sure that evrything is ok.
if u are supercharged 100%, launcher die hard or hard to kill u are good!!
thats about v6 supercharger
now for kickasskernelizer aka KAK
same procedure , run script from sd card, press green icon, run
follow options , press yess to all, and let script modify i/o shedulers also
now is preferable to run sio sheduler , u will see in script .
sio is bad for benchmarks dont worry. chose deadline and see big numbers
enjoy your supersmoother and optimized phone, stock phones will GREATLY PROFIT FROM THIS, cm7.2 can feel longer battery life!!
DOWNLOADS :
DOWNLOAD LINKS WORKS, these are not files, but pdf scripts, where u have to remove .pdf extension when downloaded!!!!!
press right click, save as , when downloaded, remove .pdf
i use v6supercharger update 9 rc6.9 . witch is in beta, but working flawless!!!
most recent updates follow here
http://forum.xda-developers.com/showpost.php?p=18703418&postcount=5021
Also CM9
(gets more battery life) ????
no mate, this versiion is only for gb based os , for ics aka cm 9 there is some other way , witch can be found on post number 2 of original thread, didnt go deep into it so i cant say how it works or how to make it work
djozaa said:
no mate, this versiion is only for gb based os , for ics aka cm 9 there is some other way , witch can be found on post number 2 of original thread, didnt go deep into it so i cant say how it works or how to make it work
Click to expand...
Click to collapse
So give me a tuturial i dont know anything about it
THE DOWNLOAD LINKS WONT WORK
to download press right click and save as.
then delete .pdf
this is only for gb and cm 7
didnt use myself cm9 so i am not writeing turt. about it
Sent from my GT-S5670 using Tapatalk
djozaa said:
to download press right click and save as.
then delete .pdf
this is only for gb and cm 7
didnt use myself cm9 so i am not writeing turt. about it
Sent from my GT-S5670 using Tapatalk
Click to expand...
Click to collapse
does it work with creeds rom 2.0/2.5
yes with any custom, stock and cm7 gingerbread rom
tho having lagfree , tweakz or something scripts is not good, since this one do it better. but anyway, those scripts dont eaven have right premissions to work evry boot so is not big deal. but yea, best would be without it
djozaa said:
tho having lagfree , tweakz or something scripts is not good, since this one do it better. but anyway, those scripts dont eaven have right premissions to work evry boot so is not big deal. but yea, best would be without it
Click to expand...
Click to collapse
its sais no such file or directory -.- ...
errors:
line1: syntax error near unexpected token ´newline´
line1: ´<?xml version="1.0" encoding="iso-8859-1"?>
Thank you man works great for me
Sent from my GT-S5670L using xda premium
n00b.androidDEV said:
its sais no such file or directory -.- ...
errors:
line1: syntax error near unexpected token ´newline´
line1: ´<?xml version="1.0" encoding="iso-8859-1"?>
Click to expand...
Click to collapse
Incomplete download...
Yes you can get the die-hard launcher on ICS/CM9 with a patched services.jar.
I give detailed instructions on how to do it.
People are having quite a lot of fun doing it themselves and learning a thing or 2
But there are a few CM9 services.jars which should work.
Every CM9 services.jar that I've tried has worked on my device running CM9 for milestone.
So should i remove lagfree, ramscript allinone etc scripts from init.d folder before installing these??
yes . only s ript i use with these is to put my sd card chache 2048 and ungaze.
Sent from my GT-S5670 using Tapatalk
djozaa said:
yes . only s ript i use with these is to put my sd card chache 2048 and ungaze.
Sent from my GT-S5670 using Tapatalk
Click to expand...
Click to collapse
Hey can u tell me which script did u use for sd card cache increase..in cm7.2 rc5.5 with ics there are 2 or 3 scripts for sd card..plz tell me which one should i remove???????
i guess u use cm7 combined by asad007 , then u should remove all those scripts , and leave only cm7 stock ones, witch are
00banner , 01sysctl , 03firstboot, 04modules, 05mountsd , 06mountdl , 20userinit.
working scripts are easy to see since they have all premissionss checked!! others have rw r r and they do nothing but mess system.
also dont delete ungaze script or a2sd or watewer u use for sd ext partition.
about sd card chache i use simple script from here, i chose 2048 one http://forum.xda-developers.com/showthread.php?t=1010807 , make sure it have all premissions checked when in your init.d
Thats rght i use the modified cm7..so i should remove everything xcpt those scripts..now i wil give a shot
its not really modified. only have extra scripts in. just make sure u leave those scripts above and for ungaze or a2sd or watever u use for sd ext storage.
Sent from my GT-S5670 using Tapatalk
OMG i cant believe its really working..now my phone's just flying..many thanks to the script maker as well as the uploader too
heheh
Sent from my GT-S5670 using Tapatalk
thanks, will try this after i'm done with my studies
when i press the script, press su button and then run and it say "Syntax Error : newline unexpected
help please?
ok...first of all i am a complete newbie at this rooting and installing custom ROMs...
i rooted my galaxy fit last week and installed stuff like Link2SD,ROM Manager,RAM Manager,SD Booster and stuff...but all this is talking up a lot of my RAM and my phone memory is almost full with around 20-25 mb left...
1...so will installing a custom ROM increase my phone memory and my RAM??i have a 32 gb class 4 SD card...so i can partition 4-6gb out of it...no problem
2...i went through a lot of tutorials and forums regarding using SD card as phone memory(partitioning it)...but couldnt understand anything...so could someone please explain to me properly how to do it??
3...and finally how to install a custom ROM...i do not have internet on my phone+no wifi on my computer...so i cant use Clockwork Recovery on my ROM manager...so whatever i have to do i have to do it through my PC USB port...so a tutorial on that would be highly useful...
4...lastly i cannot decide on which ROM to use...im a a fix between...
[DEV] CyanogenMod 9.0.0-RC0-GT-S5670-GalaxyICS-KANG-beta3 [Latest update: 26.02.12]
VS
[ROM&Kernel][port][801 Mhz]CyanogenMod 7 MusicEdition_v3.0
***my phone is currently running on
Android Version 2.2.1
Basebrand Version S5670DDKA6
Kernel Version 2.6.32.9-perf [email protected]#1
Build number FROYO.DDKA7
+ i have rooted my phone***
thank you in advance...
pgchelsea said:
ok...first of all i am a complete newbie at this rooting and installing custom ROMs...
i rooted my galaxy fit last week and installed stuff like Link2SD,ROM Manager,RAM Manager,SD Booster and stuff...but all this is talking up a lot of my RAM and my phone memory is almost full with around 20-25 mb left...
1...so will installing a custom ROM increase my phone memory and my RAM??i have a 32 gb class 4 SD card...so i can partition 4-6gb out of it...no problem
2...i went through a lot of tutorials and forums regarding using SD card as phone memory(partitioning it)...but couldnt understand anything...so could someone please explain to me properly how to do it??
3...and finally how to install a custom ROM...i do not have internet on my phone+no wifi on my computer...so i cant use Clockwork Recovery on my ROM manager...so whatever i have to do i have to do it through my PC USB port...so a tutorial on that would be highly useful...
4...lastly i cannot decide on which ROM to use...im a a fix between...
[DEV] CyanogenMod 9.0.0-RC0-GT-S5670-GalaxyICS-KANG-beta3 [Latest update: 26.02.12]
VS
[ROM&Kernel][port][801 Mhz]CyanogenMod 7 MusicEdition_v3.0
***my phone is currently running on
Android Version 2.2.1
Basebrand Version S5670DDKA6
Kernel Version 2.6.32.9-perf [email protected]#1
Build number FROYO.DDKA7
+ i have rooted my phone***
thank you in advance...
Click to expand...
Click to collapse
well.....dude tell me if u can just have internet connection i mean...widout it u cannot download anything ...nd install nything...
---------- Post added at 03:12 PM ---------- Previous post was at 03:09 PM ----------
alrite m ready!!!just answer my questions...nd i wil help u out....
First of all upgrade your phone to gingerbread using Kies/Odin
Sent from my GT-S5670 using XDA
no net...
i was checking out a few videos on youtube about installing custom ROMs on galaxy fit when i found this....
www . youtube . com/watch?v=Xe-XMbDQfzQ (remove spaces)
well...can you take a look and say if its genuine or not??
like instead of their ROM i will use your Cyanogen Music 7 ROM...but the stuff they do with Odin...will that work on my phone??
i haven't watched that video but the link provided is for Cyanogen 9 which is unstable.
instead do this
YOU NEED TO UPGRADE TO GINGERBREAD BEFORE DOING THIS
--Download Complete Clockword Recovery Package from here
http://forum.xda-developers.com/showthread.php?t=1339640
--Flash it via ODIN
--Download the Music ROM
--Flash it via CWM
You'll find required instructions in the respective threads.
Heyy i was a complete noob but with all d search in youtube+ google + xda.. i flashed custom rom ... i hd onced i asked the questions but didnt get proper reply so ,i knw ur prb...
1) get cwm using this link just cwm not cm as its cm7....www.youtube.com/watch?v=nWc9hYEzMlM
2)flash it via odin as shown.
3)now just go to the thread of the stock rom i like cm7 music edition and rc5.5 ....
4)switch off phone press power + home key..
5)u shud hv copied the files by now to your sd..
6)gotO MOUNTS AND Storage clear data clear sysytem clear cache ..come back and wipe data and reset got to chooze sip frm sd ..selectthe file and go back reboot wait for sometym der u go... tada yu just got cm ... u can just follow d steps in video instead of using cm7 file using ne cm u want.....best of luckk
CLclICK tHANKZ if I heLPed yOu
---------- Post added at 08:27 PM ---------- Previous post was at 08:25 PM ----------
Suvinay said:
Heyy i was a complete noob but with all d search in youtube+ google + xda.. i flashed custom rom ... i hd onced i asked the questions but didnt get proper reply so ,i knw ur prb...
1) get cwm using this link just cwm not cm as its cm7....www.youtube.com/watch?v=nWc9hYEzMlM
2)flash it via odin as shown.
3)now just go to the thread of the stock rom i like cm7 music edition and rc5.5 ....
4)switch off phone press power + home key..
5)u shud hv copied the files by now to your sd..
6)gotO MOUNTS AND Storage clear data clear sysytem clear cache ..come back and wipe data and reset got to chooze sip frm sd ..selectthe file and go back reboot wait for sometym der u go... tada yu just got cm ... u can just follow d steps in video instead of using cm7 file using ne cm u want.....best of luckk
CLclICK tHANKZ if I heLPed yOu
Click to expand...
Click to collapse
ya dont forget to get gingerbread first..just chek the other video of the same subscriber i gave u
PLZ CLIK ON THKZ IF I HELPED
If you need CWM i recomand that http://forum.xda-developers.com/showthread.php?t=1339640 for me works fine.
But don't forget to update to gingerbread using Kies. If update via Kies don't work u can find stock rom here http://forum.xda-developers.com/showthread.php?t=1533380
thanks man..but 1 more question
Suvinay said:
Heyy i was a complete noob but with all d search in youtube+ google + xda.. i flashed custom rom ... i hd onced i asked the questions but didnt get proper reply so ,i knw ur prb...
1) get cwm using this link just cwm not cm as its cm7....
2)flash it via odin as shown.
3)now just go to the thread of the stock rom i like cm7 music edition and rc5.5 ....
4)switch off phone press power + home key..
5)u shud hv copied the files by now to your sd..
6)gotO MOUNTS AND Storage clear data clear sysytem clear cache ..come back and wipe data and reset got to chooze sip frm sd ..selectthe file and go back reboot wait for sometym der u go... tada yu just got cm ... u can just follow d steps in video instead of using cm7 file using ne cm u want.....best of luckk
CLclICK tHANKZ if I heLPed yOu
---------- Post added at 08:27 PM ---------- Previous post was at 08:25 PM ----------
ya dont forget to get gingerbread first..just chek the other video of the same subscriber i gave u
PLZ CLIK ON THKZ IF I HELPED
Click to expand...
Click to collapse
what if i do this without the upgrade to Gingerbread...as in with the Froyo 2.2 i try installing the custom ROM as it shows in the video??
my kies is saying "connection error" when i click on upgrade firmware...so should i go for the custom ROM in my froyo 2.2??
u need internet connection, cuz when u update via kies its downloading the frimware
You can try to install over Froyo, but some features you can't use (like cam, wifi, bt etc) because customs roms are build in most cases on gingearbread
so i will do this??
inginer said:
You can try to install over Froyo, but some features you can't use (like cam, wifi, bt etc) because customs roms are build in most cases on gingearbread
Click to expand...
Click to collapse
1st option::
install the custom ROM on my Froyo 2.2
then add fix for the camera and wifi
will that work??
2nd option::
since Kies is not updating my firmware...i manually update my firmware and then root it and then install the custom ROM
i would really prefer the 1st option if possible...
I don't think it will work the first option, but you can try on your own risk.
Rather this second option would go. You have everything you need here if you want go with the second option.
there is no custom ROM for froyo in galaxy fit, cuz all custom ROM made for fit is based on gingerbread
pgchelsea said:
1st option::
install the custom ROM on my Froyo 2.2
then add fix for the camera and wifi
will that work??
2nd option::
since Kies is not updating my firmware...i manually update my firmware and then root it and then install the custom ROM
i would really prefer the 1st option if possible...
Click to expand...
Click to collapse
hey y dont u just download gingerbread from 4shared in dis video and update via odin http://www.youtube.com/watch?v=ThlLswWGFFU&feature=channel
finally did it...
updated to gingerbread>>installed CWM using odin>>installed CM Music 7.0
thanks a lot guys...
oh one last thing...how to partition my SD card...i have a 32 gb SD card...i want to use 2GB from it as phone memory...is it possible??if so how??
boot into cwm and select partition sd card from advanced menu.
Be careful as this will format your SD card.
Aspire said:
boot into cwm and select partition sd card from advanced menu.
Be careful as this will format your SD card.
Click to expand...
Click to collapse
okay..i partitioned my SD card with 2GB using CWM...but still when i open phone i see 180 mb internal memory...but SD card memory reduced by 2 GB :O
you need to flash the memory hack. check android development section.
is there a list of stable roms for LG-P920 (OPTIMUS 3D)?
i recently flashed King 3d ROM its a good firmware, i love the transitions,boosts,and other features.. but i had issues after that such as:
/widgets (when i set widgets,if rebooted,everything i put on it will be double copied 1st and 2nd windows will have the same widgets)
/time and date (if the phone was rebooted the date will be set into 1/1/2000 and time will be 12:00am)
/purchased items on market such as axcel drum, recieving messge like (this software isnt compatible with your device), when i flashed into this rom, some items i payed for,i cant download it anymore unlike the previous rom i have i can install almost everything from the market
/other downloadable apps i can download some apps but it force closes or automatic closes
/Saving Contacts whenever i save new contacts or replace, my phone hangs.. so i need to remove battery..
----i didnt make any back ups.. can someone give me a download link to lg-p920 stock rom?found link but they are uploaded on fileserve.. or is there any better rom to run on my phone?
From 2.2.2 Froyo(Stock)
>to Gingerbread 2.3.5(Rooted)
>then flashed king 3d rom
LG OPTIMUS 3D P920
Thiaiz o3d rom is amazing. Fast and verry stable. Look in development. Or shold i give you an link?
Sent from my LG-P920 using xda premium
Sure.. if you mind.
You must be using that rom. Have you tried king 3d rom? If you did can you make a comparison between those two? About performance,compatibility,features..
Sent from my LG-P920 using XDA
shtchalle said:
Thiaiz o3d rom is amazing. Fast and verry stable. Look in development. Or shold i give you an link?
Sent from my LG-P920 using xda premium
Click to expand...
Click to collapse
+1
(haven't used king3d although, but Thiaiz Rom + Thiaiz kernel is a VERY stable combination and quite fast).
Havnt heard about kernels. Is it flashable too? Does it make changes into the performance only?or with the appearance of the phone? Thanks in advance.
Sent from my LG-P920 using XDA
chreeze24 said:
Havnt heard about kernels. Is it flashable too? Does it make changes into the performance only?or with the appearance of the phone? Thanks in advance.
Sent from my LG-P920 using XDA
Click to expand...
Click to collapse
1. Yes, kernels are flashable.
2. Performance and other tweaks: antenna signal power, battery consumption, etc... (don't expect miracles however).
Look here (though unfortunately that kernel is unstable for me, is probably the most advanced):
http://forum.xda-developers.com/showthread.php?t=1547319
thank you
i really appreciate your help..
my software version is:
LGP920-V21a
--so that means i only need to download
(TitanKernel V0.5 V21A 22-04-2012.zip) this one only right? just to make sure..
uhm.....
do you know any trusted download link of thiaiz o3d rom for lg-p920?
i dont want to mess up my phone with those copy-edit roms uploaded over the internet.. if you know what i mean..
Yes mate you should be good to go with that one just make sure you do a backup just in case. You could also try my rom if you wanted . Althought i highly recommend you try thiaizs stuff super stable.
Edit: Just read your next post the links in the thread of thiaiz are safe.
hyperion rom
is that your rom?
thanks by the way bro..
The best forum
ive been on a lot of forums..
but here, people are very friendly,helpful,humble.. unlike the others..
Thank you for helping.. GOD BLESS.. ^_^
Yes thats my rom, most people in this forum try and help people thats why xda is one of best forums.
wow.. ill try your creation as soon as i get a new device.. i just havnt made my mind for which device should i choose..
THUMBS UP+RESPECT= For you mate
do you know what is "03dtetherupdate.zip"?what is it for? just downloaded the kernel and rom made by thiaiz.. i havnt got any replies from his thread.. or the two files i just downloaded is the only thing i need?
I like meemos DNA rom + titan kernel
Sent from my LG-P920 using xda premium
oh no
got problem with thiaizo3d
my network is not working.. doesnt even read my simcard..
my mesages - cannot open
play store - doeasnt open even connected to wifi
its even worse..
chreeze24 said:
got problem with thiaizo3d
my network is not working.. doesnt even read my simcard..
my mesages - cannot open
play store - doeasnt open even connected to wifi
its even worse..
Click to expand...
Click to collapse
Have you done the 3 wipes in recovery?
If not:
-reboot and enter recovery,
-Wipe Data/Factory reset -> select yes (be warned: this erase your personal data, I suppose you did a backup first),
-Wipe Cache -> select yes,
-Advanced / Wipe Dalvik Cache -> select yes,
-reboot
Should work...
Good luck,
ive learned the basics.. i did that.. but thank god i solved my problem.. i flashed 2.7 that supports v21d, my present version is v21a.. got the wrong zip.. downloaded the other zip file 2.6.. and voila.. done.. thanks by the way bro
mrbandwidth said:
Have you done the 3 wipes in recovery?
If not:
-reboot and enter recovery,
-Wipe Data/Factory reset -> select yes (be warned: this erase your personal data, I suppose you did a backup first),
-Wipe Cache -> select yes,
-Advanced / Wipe Dalvik Cache -> select yes,
-reboot
Should work...
Good luck,
Click to expand...
Click to collapse
If you do "wipe data/factory reset", it wipes cache and dalvik-cache as well.
No need to do the other two wipes.
The Dark Lestat said:
If you do "wipe data/factory reset", it wipes cache and dalvik-cache as well.
No need to do the other two wipes.
Click to expand...
Click to collapse
Does it? It's the first time I hear that. Most custom ROM developers in any phone I had, always recommend to wipe data/cache and some recommend to wipe dalvik as well.
ACURA ICS FULL EURO V3 FINALl
ONLY FOR EXTENDED SYSTEM PARTITION
CHANGELOG: BUILT IN NEW NEXT LEVEL V5 KERNEL
ACURA own tweaking software
include NUANCE
Quickest dalvik so far
battery tweaks and much more..
HOw To: Put zip to sd card, in the recovery wipe cache ,dalvik cache,wipe system, flash zip,reboot,after reboot flash fix euro 30a final,reboot,enjoy
if you have metalic sound issues flash:https://www.wuala.com/franq36/Documentos/LG 3D/fix euro baseband metalico/?key=nQor3iT9JQNu
All credit goes to acura and his team thank you for all your hard works!!!
][/FONT][/SIZE]
Source:http://www.htcspain.com/foro/roms-lg-optimus-3d-384/ics-nueva-rom-ics-full-euro-v3-30a-58452/FIX EURO PARTITION:
Why the title says ROM? This is kernel released right?
cyclonmaster said:
Why the title says ROM? This is kernel released right?
Click to expand...
Click to collapse
Nope it's a ROM, and it's amazing, been using it for a week now with no problems!
Couple of tweaks you need to make to it for fluidity and battery life:
In Developer options...
Tick "Force GPU rendering"
Change Window & Transition animation scale to 0.5
(To see the difference the Force GPU rendering setting makes just back right out of the settings after ticking/unticking it (Only takes effect after doing this) and go back into developer options then scroll up and down! )
In Advanced Wi-Fi
Change "Keep Wi-Fi on during sleep" to "Only when plugged in" (Battery was being rinsed on mine because of this, It may be different for you)
personally i love darkroom sound ultimate ROM at this moment
check darkroom site P920 roms section for it (i use another kernel for it only)
I'm waiting for a CM based on Kit Kat ROM patiently.
Link is dead
Download link on dropbox isn't working.
Any mirrors?
EDIT:
Downloaded the rom from official site:
https://mega.co.nz/#!E4EExJAK!PzcYEh7V0R3RHd1-TnUyfzgk_5sURouJxAmYKixOnCM
and I have one question.
Does this work on XBSALL's v28b large,?
My spanish iz very bad and google translate is s%$..
jocazmaj said:
...
Does this work on XBSALL's v28b large,?
My spanish iz very bad and google translate is s%$..
Click to expand...
Click to collapse
Yes works fine on XBSALL v28b large with the euro fix
---------- Post added at 04:30 PM ---------- Previous post was at 04:16 PM ----------
cyclonmaster said:
I'm waiting for a CM based on Kit Kat ROM patiently.
Click to expand...
Click to collapse
AFAIK there won't be a Kit Kat variant as there are no drivers for the TI hardware?
might be wrong
This is an AWESOME ROM!
Testing it a for a few hours now and it's by far the fastest one..:victory:
We'll see about battery life tomorrow .
what requires the flashing of the metal fix?
re
cyclonmaster said:
I'm waiting for a CM based on Kit Kat ROM patiently.
Click to expand...
Click to collapse
im also waiting day by day checking
i love the work acura have out in to this device he is the front in development to this phone but why is this extended partioning only as i that is on the P920 V30A EU open can't use it makes me a bit sad
mic3d said:
ACURA ICS FULL EURO V3 FINALl
ONLY FOR EXTENDED SYSTEM PARTITION
CHANGELOG: BUILT IN NEW NEXT LEVEL V5 KERNEL
ACURA own tweaking software
include NUANCE
Quickest dalvik so far
battery tweaks and much more..
HOw To: Put zip to sd card, in the recovery wipe cache ,dalvik cache,wipe system, flash zip,reboot,after reboot flash fix euro 30a final,reboot,enjoy
if you have metalic sound issues flash:https://www.wuala.com/franq36/Documentos/LG 3D/fix euro baseband metalico/?key=nQor3iT9JQNu
All credit goes to acura and his team thank you for all your hard works!!!
Download:https://www.dropbox.com/s/xs5sjh7a0xzi605/Euro_30A_Final.zip
Source:http://www.htcspain.com/foro/roms-lg-optimus-3d-384/ics-nueva-rom-ics-full-euro-v3-30a-58452/FIX EURO PARTITION:
Click to expand...
Click to collapse
Hi there
i just installed this today but i have a problem
it does not mount SD nor External SD
any way to fix =????
CyberBOG said:
Hi there
i just installed this today but i have a problem
it does not mount SD nor External SD
any way to fix =????
Click to expand...
Click to collapse
You need to put the fix for the partitions! If you have europan partitions you need to put the fix for euro partitions in the other case for korean partitions!
SedyBenoitPeace said:
You need to put the fix for the partitions! If you have europan partitions you need to put the fix for euro partitions in the other case for korean partitions!
Click to expand...
Click to collapse
Hi thank for quick reply
i did a new instalation
and did the euro fix ( i did not see it in first post DAH )
now its all ok
gona test it out
thanks
CyberBOG
hi all, i've large partition installed but i have an error message when i try to install Acura v3 rom. i use twrp and the error is after system formatting during flash. can someone help me?
sly1982 said:
hi all, i've large partition installed but i have an error message when i try to install Acura v3 rom. i use twrp and the error is after system formatting during flash. can someone help me?
Click to expand...
Click to collapse
What is the error's message? However i don't know in every case because i use the CWM recovery and i installed the rom and it worked fine on large partition! (for large partition you need to put the euro fix).
Hi
i got the Rom to work wonderfully
has good speed and works fine in General
but now i found out i have Low Volume in a call
i set Ear piece to max but still low volume
any one know a fix for this
i tested it with stock Rom and i have grate sound in Ear piece
hlp plz
CyberBOG
CyberBOG said:
Hi
i got the Rom to work wonderfully
has good speed and works fine in General
but now i found out i have Low Volume in a call
i set Ear piece to max but still low volume
any one know a fix for this
i tested it with stock Rom and i have grate sound in Ear piece
hlp plz
CyberBOG
Click to expand...
Click to collapse
Well is a little bug probably related on the baseband! On htcspain i think that there is a fix also for that problem! Or you can install the baseband from Acura that you can found on HTCSpain
i know that after flashing rom i need to flash euro fix but... i can't install rom... when formatting system during flash, i have partition error and everithing go down... then i can't boot system, i have to reflash bin file from lg flash tool
NEWER PORT IS HERE
This rom not ported by me i only edit AmalD s Miui v5 rom and change some framework codes http://forum.xda-developers.com/showthread.php?t=2221606 i change some libs , betwen build 12 -8 , and find Pandora kernel for Performance http://forum.xda-developers.com/showthread.php?t=2238754 (
This is my first share, i spend a lot of time for rom s stability.I dont know anything about java cods or library files errors etc soo my method was try - track - change -try -track -change...
Please dont offense i just sharing what i am using at the moment i think pico is alive :good:
İ USE:
A CLASS 10 MICRO SD
YANNOU'S CMW RECOVERY (TWRP doeesnt work principle)
2 SD EXT4 PARTİTİON I SHARE SCREEN ON ATTACHMENT
WHAT İS DİFFERENT ?
* ROM more smooth apps open very fast :fingers-crossed:
*Native USB storage work :victory: (you need to thick MTP fix option from MULTI MOUNT SD APP then reboot )
* Overclock to 878 Mhz
* Status Bar more stabile
INSTALL:
★YOU HAVE TO MAKE 2 SD EXT-4 PARTİTİON ( SD-DATA= 600MB OR MORE SD-CACHE= 90 MB)
★IN RECOVERY FORMAT SYSTEM,DATA,CACHE
★AFTER MOUNT SYSTEM,DATA,CACHE,SD CARD,SD EXT
★FLASH ROM
★FLASH KERNEL PANDORA REVISED EDITION http://forum.xda-developers.com/showpost.php?p=43242945&postcount=357
★REBOOT , BOOT TAKES 10-15 MIN that can changeable reason sd card speed...
When you done you can use SET CPU APP for set cpu 878 i use oc , but cant guarante your phones safety, but it works
in attach files i give sd ext screen , a antutu and yannou recovery with adb( i cant find link of Yannou s thread)
Download:https://www.mediafire.com/?51nt2s2h2tqgatc
Thanks to Thepico for Video
https://imageshack.com/i/idgap22np
XenoMorphv2 said:
This rom not ported by me i only edit AmalD s Miui v5 rom and change some framework codes http://forum.xda-developers.com/showthread.php?t=2221606 i change some libs , betwen build 12 -8 , and find Pandora kernel for Performance http://forum.xda-developers.com/showthread.php?t=2238754 (
This is my first share, i spend a lot of time for rom s stability.I dont know anything about java cods or library files errors etc soo my method was try - track - change -try -track -change...
Please dont offense i just sharing what i am using at the moment i think pico is alive :good:
İ USE:
A CLASS 10 MICRO SD
YANNOU'S CMW RECOVERY (TWRP doeesnt work principle)
2 SD EXT4 PARTİTİON I SHARE SCREEN ON ATTACHMENT
WHAT İS DİFFERENT ?
* ROM more smooth apps open very fast :fingers-crossed:
*Native USB storage work :victory: (you need to thick MTP fix option from MULTI MOUNT SD APP then reboot )
* Overclock to 878 Mhz
* Status Bar more stabile
INSTALL:
YOU HAVE TO MAKE 2 SD EXT-4 PARTİTİON ( SD-DATA= 600MB OR MORE SD-CACHE= 90 MB)
IN RECOVERY FORMAT SYSTEM,DATA,CACHE AND MOUNT SYSTEM,DATA,CACHE,SD CARD,SD EXT
FLASH ROM
FLASH KERNEL PANDORA REVISED EDITION http://forum.xda-developers.com/showpost.php?p=43242945&postcount=357
REBOOT , BOOT TAKES 10-15 MIN that can changeable reason sd card speed...
When you done you can use SET CPU APP for set cpu 878 i use oc , but cant guarante your phones safety, but it works
in attach files i give sd ext screen , a antutu and yannou recovery with adb( i cant find link of Yannou s thread)
Download:https://www.mediafire.com/?51nt2s2h2tqgatc
Click to expand...
Click to collapse
Good work mate, just a correction, you have mentioned to format the SD card please correct it ?
+1 for your efforts :highfive:
aashking said:
Good work mate, just a correction, you have mentioned to format the SD card please correct it ?
+1 for your efforts :highfive:
Click to expand...
Click to collapse
Thanks i wrote like :silly:
Miui V5 On HTC Explorer
https://www.youtube.com/watch?v=Ls9F_fFjbfo&feature=youtu.be
All credits given to you and amal das , mentioned in description ! cheers mate ! keep up the good work
thepico said:
Miui V5 On HTC Explorer
https://www.youtube.com/watch?v=Ls9F_fFjbfo&feature=youtu.be
All credits given to you and amal das , mentioned in description ! cheers mate ! keep up the good work
Click to expand...
Click to collapse
Thanks for video bro I did not think will be interested in the topic , faster is better if you wish i can integrate your video
XenoMorphv2 said:
Thanks for video bro I did not think will be interested in the topic , faster is better if you wish i can integrate your video
Click to expand...
Click to collapse
integrate my video ? id surely like that
Can't put the pin
Guys I tried this ROM without sim and it's a great ROM but when I turn on with my sim, I can't put the pin.. the keyboard is incomplete.. I can't see the number 0 and the button "enter" .___. and I remember was the same with the other MIUI v5.....
can you tell me what can i do?
sorry for my english
dafide44 said:
Guys I tried this ROM without sim and it's a great ROM but when I turn on with my sim, I can't put the pin.. the keyboard is incomplete.. I can't see the number 0 and the button "enter" .___. and I remember was the same with the other MIUI v5.....
can you tell me what can i do?
sorry for my english
Click to expand...
Click to collapse
bro when i trying ROM remove sim card too but that problem not happens... in recovery did you wipe system, data ,cache ? and mount all partition on top? i dont knom bu maybe that cause langue, bad zip etc... Also you can try any other keyboard too google keyboard not the best one... Thanks for review
dafide44 said:
Guys I tried this ROM without sim and it's a great ROM but when I turn on with my sim, I can't put the pin.. the keyboard is incomplete.. I can't see the number 0 and the button "enter" .___. and I remember was the same with the other MIUI v5.....
can you tell me what can i do?
sorry for my english
Click to expand...
Click to collapse
use super wipe and then install rom , should work just fine
Hi
I have installed this ROM for the last few days now
It is really one of the very good work i have tried yet
I am facing few problems @XenoMorphv2 look if these can be solved
1- I think mounts2sd and busybox is installed during ROM installation due to which under Settings>Storage - System Storage Total 1GB and Used 497MB whereas after installing one or two applications when I try to install few applications it says in-sufficient internal space
2- Whenever I change the theme, The theme is reverted back to the default after few minutes or an hour. I think launcher crashes or restarts it self or what ever
3- Battery timing is quite low
4. While performing An Tu Tu benchmark the phone crashes/reboots during tests
Check if these could be solved
Rizwan