Database Info

Help

after flashing this ROM http://forum.xda-developers.com/showthread.php?t=1128412 on my phone mt phone got stuck on the FuguMod screen. and keep on restarting. what will i do? can someone help me.

peterpandesal06 said:
after flashing this ROM http://forum.xda-developers.com/showthread.php?t=1128412 on my phone mt phone got stuck on the FuguMod screen. and keep on restarting. what will i do? can someone help me.
Click to expand...
Click to collapse
You're only on step 9. Read step 10.

also you posted in the wrong section...
and your problem was addressed in the directions....

it kept on restarting until now for more than 30mins. is this normal? help me please sir.

peterpandesal06 said:
it kept on restarting until now for more than 30mins. is this normal? help me please sir.
Click to expand...
Click to collapse
Read the instructions on the thread you linked to. You are currently on step #9, read the instructions from there on.

can you help me figure this problem out? im sorry im just a newbie. my fault.

Calm down and read the directions before you do something three or four times. Make sure you go through each step. Your problem like said above are stated in that threads direction. Finish the steps and you will get it to work.
Sent from my SGH-T959V using XDA App

9) Let the SGS4G go through the Fugu bootloop a couple of times. This is where your SGS4G gets Rooted.
10) Reboot to download mode once more
11) Close and re-open Heimdall. Click and browse the ORIGINAL zImage (NOT THE ZIMAGE_PATCH VERSION!!). Click start.
12) Let the unit flash, then reboot. Download busybox to verify Root.
Click to expand...
Click to collapse
Please pay more attention in the future and read the instructions in full

i cannot put my phone into download mode to proceed to step 11. it just keep on rebooting via the FuguMod.

peterpandesal06 said:
i cannot put my phone into download mode to proceed to step 11. it just keep on rebooting via the FuguMod.
Click to expand...
Click to collapse
pull the battery then do the download command then insert batter while ur still holding the buttons!!!

i've already did that.

just go with the kg4 rom.

but how sir? i cannot even access my phone into download mode.

hey bud, got your pm. sorry i couldnt respond faster, had some family stuff i had to take care of. but regardless, onwards to fixing your phone!
start up odin on your computer and make sure you have the correct drivers for the phone installed. pull your battery out of the phone. then press and hold both the volume up and down keys at the same time. once you do this, plug in the usb cable to the phone and the phone should automatically go into download mode. leave your phone plugged into the computer and place the kc1 rom into pda, make sure repartition is unchecked and click start and your phone should be ok.
for the drivers and overall steps through odin, check out this link:
http://forum.xda-developers.com/showthread.php?t=1001759
for the file to odin, i would say to use kc1, which can be found in this link:
http://forum.xda-developers.com/showthread.php?t=1045671
if the above method of getting into download mode doesnt work, check out this link:
http://forum.xda-developers.com/showthread.php?t=1069032
i know you said that you just want to get your phone working and you wanted to learn more, so this should do that. once you are comfortable with it again, we can work on getting you gb. i hope this helps and let me know how it goes.

did all the methods on how to get in to download mode but still nothing happen, it kept on rebooitng and rebooting via the FuguMod. losing hope to fix my phone.

thanks sir Jager555.

dude, don't panic, it is just a soft break
to go to download mode
1. pull out the battery and disconnect the usb.
2. connect the phone to pc with usb
3. while pressing volum up + down at SAME TIME put the battery in the phone

Yeah, it's just a soft brick, so it's no big deal. Try carefully redoing all the download mode methods. You might've accidentally missed a button, for all you know. Once you're in download mode, everything's good.

Please post in the correct sections. Thread closed.

Bricked, trying to fix, but running into problems.

So long story short, I tried to do something I probably shouldn't have, and now my phone wont boot. It does the boot screen, and then to a black screen where the screen is active, and if I touch it, the buttons light up. I can get into a recovery screen with vol- and 3D button, but it says "can't mount cache recovery log" with whatever I press. I've tried following the guide here, but I get to where I start updating, and the program just stops responding. Been trying different things for a few hours now. Every search I find says that it is solvable, but at the same time, I can't seem to solve it.
Any info I'm missing? Getting reckless here. I guess I deserve it for what I've gotten myself into. Anything is appreciated!

XIIISlaughters said:
So long story short, I tried to do something I probably shouldn't have, and now my phone wont boot. It does the boot screen, and then to a black screen where the screen is active, and if I touch it, the buttons light up. I can get into a recovery screen with vol- and 3D button, but it says "can't mount cache recovery log" with whatever I press. I've tried following the guide here, but I get to where I start updating, and the program just stops responding. Been trying different things for a few hours now. Every search I find says that it is solvable, but at the same time, I can't seem to solve it.
Any info I'm missing? Getting reckless here. I guess I deserve it for what I've gotten myself into. Anything is appreciated!
Click to expand...
Click to collapse
Find dark lestats guide and do the volume plus up and connect it to your pc and flash a kdz.. After you flash kdz start it in recovery wipe everything and your sorted...

This is my problem... I can't seem to get the guide working. I get to where the KDZ should install, but then the program stops responding, and says it can't find device. Is it because I'm not putting it in download mode right?
EDIT
***Scratch that... I think I've got it to work. Will edit again if it does ***

XIIISlaughters said:
This is my problem... I can't seem to get the guide working. I get to where the KDZ should install, but then the program stops responding, and says it can't find device. Is it because I'm not putting it in download mode right?
EDIT
***Scratch that... I think I've got it to work. Will edit again if it does ***
Click to expand...
Click to collapse
Kool let us know how it goes..

Totally fixed it. Thanks a million for making me try to get it to work again! Haha

XIIISlaughters said:
Totally fixed it. Thanks a million for making me try to get it to work again! Haha
Click to expand...
Click to collapse
Your welcome anytime what did you do exactly anyway..

Just didn't mount the phone correctly. Never actually did get it to vibrate, and it just didn't want to show in device manager. But it ended up working.

XIIISlaughters said:
Just didn't mount the phone correctly. Never actually did get it to vibrate, and it just didn't want to show in device manager. But it ended up working.
Click to expand...
Click to collapse
Sorry that came out wrong i meant what did you do to brick your phone lol..

Meemo23 said:
Sorry that came out wrong i meant what did you do to brick your phone lol..
Click to expand...
Click to collapse
OH! Yeah, I just tried to flash a baseband to get CM7 networking to work. Had no idea what I was doing. Stupid me.
Doing more research now... If I'm running v20c, what kind of roms can I flash? It seems like there aren't any at all. Or does it matter what roms I flash in relation to what version I currently have? It's all a learning experience for me lol.

XIIISlaughters said:
OH! Yeah, I just tried to flash a baseband to get CM7 networking to work. Had no idea what I was doing. Stupid me.
Doing more research now... If I'm running v20c, what kind of roms can I flash? It seems like there aren't any at all. Or does it matter what roms I flash in relation to what version I currently have? It's all a learning experience for me lol.
Click to expand...
Click to collapse
You can flash any roms on any basebands.. but you cannot mix gingerbread roms with froyo basebands its a no go lol..

Okay, well that makes more sense. I assume it works as whatever rom you flash, the baseband you have is what it uses?

Meemo23 said:
Find dark lestats guide and do the volume plus up and connect it to your pc and flash a kdz.. After you flash kdz start it in recovery wipe everything and your sorted...
Click to expand...
Click to collapse
On my phone flashing kdz finished with 100% but when I try to start it remain on boot logo and when I put in recovery (3d + voldwn+pwr) cache problem, no more option no wipe and no reboot.
Tried v10k-v10d-v20a-v21d
Someone can help me?

Dont press 3D for stock recovey menu
Sent from my LG-P920 using XDA

same without 3d button, tried also lgflashtool procedure but fails to reboot the phone as fails lgmobile support tool so I decided to send LG for warranty.
thank you all

[Q] stuck on lg screen on my lg g2x

i recently got into rooting and setting up my phone for new roms but im still new at it. i ended up bricking my phone to the lg screen with the blue swipe across the screen. my computer will not register the driver to use recovery flasher. i need help. anyone wanna help out a noob?

Try using nvflash to revert back to 2.3.4 I can't give you a link but it's easy to find in the development section

jj_z1 said:
Try using nvflash to revert back to 2.3.4 I can't give you a link but it's easy to find in the development section
Click to expand...
Click to collapse
i tried to use nv flash but no matter what i do i cant seem to make my phone register in the usb driver. if i could make it register i would be able to flash it then.

Did you try using the kdz updater? it's a tricky method, but if you follow the guide properly you should be able to get it going

jj_z1 said:
Did you try using the kdz updater? it's a tricky method, but if you follow the guide properly you should be able to get it going
Click to expand...
Click to collapse
i dont know how to go about it.

laroacha said:
i dont know how to go about it.
Click to expand...
Click to collapse
Never mind my last post, you need to be able to boot into a rom to use kdz updater, it's been a while since I had to do this kind of thing.
I'm pretty sure you only soft bricked your phone (i.e. it still turns on) and the only way, that I know of, is to use nvflash. I've had the same problem before, there could be many things that are causing the phone to not be recognized by your computer. Follow this guide http://forum.xda-developers.com/showthread.php?p=17258229
when you plug the usb into your phone make sure the audio on you computer is loud enough for you to hear that "usb recognized" sound. If you don't hear it, or it does not get recognized, try using a different usb port on your computer, believe me that actually worked for me a couple of times. Also, make sure you follow the steps very carefully because if you use the wrong button combination, or release the buttons too early, it won't work.
I wish I could help you more, but that's all i've got.
Good luck, and if by any chance you get it fixed, don't try to root your phone using any root tools, simply nvflash cwm recovery and flash your choice of a custom rom, that will automatically give you root privileges.

jj_z1 said:
Never mind my last post, you need to be able to boot into a rom to use kdz updater, it's been a while since I had to do this kind of thing.
I'm pretty sure you only soft bricked your phone (i.e. it still turns on) and the only way, that I know of, is to use nvflash. I've had the same problem before, there could be many things that are causing the phone to not be recognized by your computer. Follow this guide http://forum.xda-developers.com/showthread.php?p=17258229
when you plug the usb into your phone make sure the audio on you computer is loud enough for you to hear that "usb recognized" sound. If you don't hear it, or it does not get recognized, try using a different usb port on your computer, believe me that actually worked for me a couple of times. Also, make sure you follow the steps very carefully because if you use the wrong button combination, or release the buttons too early, it won't work.
I wish I could help you more, but that's all i've got.
Good luck, and if by any chance you get it fixed, don't try to root your phone using any root tools, simply nvflash cwm recovery and flash your choice of a custom rom, that will automatically give you root privileges.
Click to expand...
Click to collapse
every time i look at my apx driver it always tells me to troubleshoot but it always says driver not installed. ive downloaded the same driver in different posts just to make sure but nothing helps. Wireless shops are useless. I live in vegas and there isnt a single store with a person smart enough to figure it out.lol. ive given my phone up for days at a time to shops who brag about "WE CAN FIX ANYTHING" they lied. well i guess im going to search for a few more hours on here to get some kind of lead. thanks for the help. if you kknow anything else or figure something out i would appreciate the help.

Have you tried this stuff?
http://forum.xda-developers.com/showthread.php?t=1619932
It sounds to me like your pc's jacked up the driver somehow. Try plugging in the phone with the battery out and holding all 3 buttons, go into your device manager and uninstall all the USB drivers. Then reboot and try following the apx driver installation procedure again.
Sorry if you tried all this stuff a million times already.

I would say the two things that I would focus on would be to first fix the drivers on your computer. I downloaded mine from the LG website. Next is to flash CWM Recovery so you can flash a rooted ROM to your phone. I would go back to the thread where you got the instructions to start flashing and ask the same questions but only after reading the whole thread. There the orig. developer might chime in and you'll have more specific answers focused on your specific issue.
It's true your phone isn't bricked and have patience and you'll get it fixed.
Sent from my LG-P999 using xda premium

superhero7 said:
I would say the two things that I would focus on would be to first fix the drivers on your computer. I downloaded mine from the LG website. Next is to flash CWM Recovery so you can flash a rooted ROM to your phone. I would go back to the thread where you got the instructions to start flashing and ask the same questions but only after reading the whole thread. There the orig. developer might chime in and you'll have more specific answers focused on your specific issue.
It's true your phone isn't bricked and have patience and you'll get it fixed.
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
well i have all the drivers needed. and the computer is fine but the phone is not. i mean the pc doesnt quite read the phone right. with that being said i dont know how to flash cwm recovery to a phone my computer cant read. im running windows 7 64bit and all my usb drivers work fine.

CWM = Clockworkmod Recovery (everyone remember this is a newbie).
Important question: Did you do a backup before making any changes to your phone?
Also, try this: remove your phone's battery for 30 seconds. Put the battery back in. Press and hold the volume down button, then press and hold the power button. Hold both buttons. First you'll see the white LG screen, then wait, when you next see the blue LG screen wait ONE second (no longer) then release the buttons. Tell us what the phone does then and what the screen says.

Have you tried taking out your SIM card and micro SD card?
Usually right after I take them out and plug in my phone while holding volume up and volume down... it usually works after that.
Yup, that's my problem. No matter how many USB ports I tried it still wouldn't read it until I took out the SIM card and micro SD ;p.

Try this on for size...
laroacha said:
well i have all the drivers needed. and the computer is fine but the phone is not. i mean the pc doesnt quite read the phone right. with that being said i dont know how to flash cwm recovery to a phone my computer cant read. im running windows 7 64bit and all my usb drivers work fine.
Click to expand...
Click to collapse
Sounds like you are having the same the issues i was having with my phone why dont you try this..... First you have to flash a custom recovery image for your phone, follow all the procedures exactly then once you have flashed your CWM Recovery ( i. e. Clockworkmod recovery) Once you have installed that properly, you can now flash your new custom ROM and that should help to fully reboot your phone back to recovery for you to start using again....... hope that works for you.......just as it did for me have a good one!!... :fingers-crossed:

RVD1 said:
Sounds like you are having the same the issues i was having with my phone why dont you try this..... First you have to flash a custom recovery image for your phone, follow all the procedures exactly then once you have flashed your CWM Recovery ( i. e. Clockworkmod recovery) Once you have installed that properly, you can now flash your new custom ROM and that should help to fully reboot your phone back to recovery for you to start using again....... hope that works for you.......just as it did for me have a good one!!... :fingers-crossed:
Click to expand...
Click to collapse
He can't flash anything to his phone -__- that's the problem we are all trying to solve.

May sound stupid, but have you tried different cords? Maybe your USB cord is bad. Just a thought.
Sent from my LG-P999 using xda premium

@op can you give us screenshots of:
A: what your device manager looks like when you plug your phone in not in apx mode.
And
B: When it is in apx mode.
To do this: right click on my computer>properties>on left hand side, click on device manager. Hit print screen, open paint and tell it to paste. Save and upload here.
Sent from my LG-P999 using xda premium

EEngineer said:
CWM = Clockworkmod Recovery (everyone remember this is a newbie).
Important question: Did you do a backup before making any changes to your phone?
Also, try this: remove your phone's battery for 30 seconds. Put the battery back in. Press and hold the volume down button, then press and hold the power button. Hold both buttons. First you'll see the white LG screen, then wait, when you next see the blue LG screen wait ONE second (no longer) then release the buttons. Tell us what the phone does then and what the screen says.
Click to expand...
Click to collapse
well i brought it to two shops and were both unsuccessful. wireless toyz and smart fix. i have it back and it goes to the lg screen. and instead of the second it flashes from black to a very dim gray back and forth. when i hold the power button along with the volume down it does a master reset and i can press the home button then it takes me to a screen to delete cache partition and what not and you move up and down with the volume keys but i cannot select anything. i think i really messed my phone up.

Somehow you got stock recovery. Google for howbto do a master reset, on devices like the nexus tablet at my work there's a series of steps needed to do a full reset/restore. Just booting into stock recovery may not give you the option. As well, please post those screen shots as I said earlier, this way the issue with the USB can be troubleshot and maybe we can get you a fully working phone with CWM.
Sent from my LG-P999 using xda premium

Волк said:
Somehow you got stock recovery. Google for howbto do a master reset, on devices like the nexus tablet at my work there's a series of steps needed to do a full reset/restore. Just booting into stock recovery may not give you the option. As well, please post those screen shots as I said earlier, this way the issue with the USB can be troubleshot and maybe we can get you a fully working phone with CWM.
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
idk how to post screenshots of my phone without a camera.lol. im about ready to give up. its been way too long with not having a phone.

You hit the print screen button, open paint, and tell it to paste/paste from clipboard.
Sent from my LG-P999 using xda premium

[Q] Newly rooted phone stuck at T mobile Screen.

I completely followed all instructions on how to root the 4g blaze, after Odin, does a reboot the phone stays at the boot up screen? Any ideas, did I over look something?
R/S
Patrick

huwilerp said:
I completely followed all instructions on how to root the 4g blaze, after Odin, does a reboot the phone stays at the boot up screen? Any ideas, did I over look something?
R/S
Patrick
Click to expand...
Click to collapse
ALL questions in General Section.
To answer you.. try wiping data & cache in CWM.
If you don't have CWM, then you did do something wrong cause you needed to have that prior to rooting.
Sent from my Unicorns' Dust.

huwilerp said:
I completely followed all instructions on how to root the 4g blaze, after Odin, does a reboot the phone stays at the boot up screen? Any ideas, did I over look something?
R/S
Patrick
Click to expand...
Click to collapse
Did you install k0nane's root kernel over ICS? If so that's where you went wrong. There's a few threads here where others have done so and have been helped. Check those threads.
Sent from my SAMSUNG-SGH-T769 using xda app-developers app

This is why I "thought" you needed 10 posts or thanks to even post in Dev.
Sigh..Oh well. Guess the search button is too hard to use.

chjema said:
This is why I "thought" you needed 10 posts or thanks to even post in Dev.
Sigh..Oh well. Guess the search button is too hard to use.
Click to expand...
Click to collapse
I have a question.... I used odin3 v 1.85 to root my gs blaze... after i went into a boot loop. after researching i found a thread on site that said to flash siyah??? well i did that and my phone went died..... wont turn on, tried every three button combo i can find, took battery out put it back in, held the volume buttons while putting the battery in and hooking it up to computer... nothing. so im gonna make an assumption that i hard bricked my phone... my question is: will a jig help me get to the download screen or recovery mode?
also i posted this here because it was the best match for my problem

laknbawill said:
I have a question.... I used odin3 v 1.85 to root my gs blaze... after i went into a boot loop. after researching i found a thread on site that said to flash siyah??? well i did that and my phone went died..... wont turn on, tried every three button combo i can find, took battery out put it back in, held the volume buttons while putting the battery in and hooking it up to computer... nothing. so im gonna make an assumption that i hard bricked my phone... my question is: will a jig help me get to the download screen or recovery mode?
also i posted this here because it was the best match for my problem
Click to expand...
Click to collapse
JIG will not help hard brick. PM me and I can offer some help

[Q] HELP HELP HELP!!!! with Verizon S3

Hi everyone I am a newbie when it comes to rooting phone and installing a Roms, I recently rooted my S3 and everything went smooth except my WIFI did not work so after so research it seemed as if I did not do it correctly but i followed all the steps. So i decided to try a new Rom I put the Rom on my S3 rebooted into recovery and wiped the phone and the cache as well. I then loaded the Rom that I downloaded from XDA and showed to work with my S3. I used Clean ROM 5.6 and I am sure I jacked something up. Well after I went through the install it went back to my recovery screen and looked like it was asking me to update my sd zip file or something so I updated it and restarted my phone. I am now getting the message "System software not authorized by verizon Wireless has been found on your phone". I thought that the SU privileges were removed or somehow the phone became unrooted so I tried to re-root my S3 and everything shows to go through successful but I cannot get passed this screen, I can get to download mode but i cannot get to recovery at all, I am not sure what I jacked up but its jacked. Any help would be greatly appreciated very much Thanks.

so you say that you cannot open your recovery? try pressing home button, volume up, and power button all at once. try this, if it does not work,i have some more
tricks up my sleeve!!

sralli said:
so you say that you cannot open your recovery? try pressing home button, volume up, and power button all at once. try this, if it does not work,i have some more
tricks up my sleeve!!
Click to expand...
Click to collapse
Yes I tried that and it did not work I also started ADB on my PC with the S3 in download mode but there was no devices found
I am totally lost and not sure what caused this issue but hey you learn from you mistakes well that's at least what they say lol. Any help is greatly appreciated thank you for your reply. :good:

keithp05 said:
Yes I tried that and it did not work I also started ADB on my PC with the S3 in download mode but there was no devices found
I am totally lost and not sure what caused this issue but hey you learn from you mistakes well that's at least what they say lol. Any help is greatly appreciated thank you for your reply. :good:
Click to expand...
Click to collapse
will you like to do a full format??? full new rom and everything- no data will be saved??

sralli said:
will you like to do a full format??? full new rom and everything- no data will be saved??
Click to expand...
Click to collapse
Does not matter to me as long as I get it back I can be rally picky at this moment.

Ya OK' wait till 10:00,tonight, I will post the method, and one thing find your phone a flash able live suit rom .
Hit thanks if helped!!!!
Sent from my P300(Funbook) using xda premium