Database Info

[Q] Totally messed up my phone after attempting to get root.

I just tried to use this method on my Inspire today and there was an error when flashing back to the stock AT&T ROM after gaining S-OFF and root. When I try to start up the phone normally, it gets stuck on the HTC screen. When I try to boot into recovery, it just shows a black screen while the LED is green.
Anybody know what I can do to fix my phone?

xr2unitx said:
I just tried to use this method on my Inspire today and there was an error when flashing back to the stock AT&T ROM after gaining S-OFF and root. When I try to start up the phone normally, it gets stuck on the HTC screen. When I try to boot into recovery, it just shows a black screen while the LED is green.
Anybody know what I can do to fix my phone?
Click to expand...
Click to collapse
which root method did you use?

I used the one click root method.

xr2unitx said:
I just tried to use this method on my Inspire today and there was an error when flashing back to the stock AT&T ROM after gaining S-OFF and root. When I try to start up the phone normally, it gets stuck on the HTC screen. When I try to boot into recovery, it just shows a black screen while the LED is green.
Anybody know what I can do to fix my phone?
Click to expand...
Click to collapse
Here you go...
http://forum.xda-developers.com/show...8#post12393978

SNadler said:
Here you go...
http://forum.xda-developers.com/show...8#post12393978
Click to expand...
Click to collapse
Sorry your link doesn't seem to work.

If you press the down volume and hold power can you get to hboot?

Try using bubby's tool to fix the CWM black screen. Its under the fixes link.

I can't seem to access any sort of recovery or hboot. Holding down both volume buttons and turning the phone on will result in the black screen with green LED. Holding the down volume button and turning the phone on does nothing.

xr2unitx said:
Sorry your link doesn't seem to work.
Click to expand...
Click to collapse
Sorry go to Bubbys super one step and search for CWM black screen....

If it helps, the phone vibrates 5 times then shows a black screen.

Well I was able to get into HBOOT but when I tried to go into recovery, the screen would just turn black.

You need to get the stock rooted PD98IMG.zip into the root of your sd card. Then go to hboot and let the phone find it. Follow on screen instructions. Note the progress bar will be vertical on upper right. I bet that fixes you up on getting the phone working. Black screen on cwm is a whole nother issue. One that I share. I think I'm going to revert to stock unrooted and then our attn1 hack kit.

There is a solution you can eng s-off, but I would not advise this there is no need to eng s-off your phone.
The simplest way though it may take longer is to, revert to stock and reroot and s-off with the hack kit.
This is a very common problem with the one click. To be honest there is a thread made just like this twice a day.

Thanks for all the help everyone. I managed to fix everything on my phone. I just flashed the rooted AT&T stock ROM with HBOOT and then used the one-click ENG S-OFF method to fix the black screen on CWM. Now running CM7 perfectly. I'm glad I no longer have to send it back to AT&T.

kinder gentler XDA i guess. Last year posts like these would have been flamed right off the board. Thats not a bad thing, but new people are wasting everyones F'ing time with these posts.
RTFM! w/e it is you decide to do , how about looking for help in the dam thread you downloaded the stuff from? I duno maybe we have a bunch of people brand new to Forums or something.

Ok I don't mean to thread jack, I just didn't want to start a new thread for this. I've been running the Coredroid Rom since I first rooted my phone. I have never had any problems with my phone even when trying out other roms. Today I tried installing the new Coredroid 5.0. It all went well as usual except this time on the last step of the setup wizard, it said something like "setup has stopped working unexpectedly and will notify HTC" and only let me press ok to force close.
After that happened all I couldn't even go to my home screen. I then tried restarting my phone but got stuck on the Coredroid rotating logo. Only way out of that was to pull the battery cover. Tried going into recovery mode but the screen would just be black and I would have the orange light flashing. That didn't work so I tried restarting again. Again just got stuck on the spinning logo.....This is where **** gets weird. I began to receive a call while on the logo and that allowed me to answer thus leaving the spinning logo. I still could not go to my home screen. I could only use the drop down notifications menu. I restarted my phone again so I could call myself while on the logo and again it got me unstuck from the logo. Only way to fix every thing was to use the search option and run Rom Manager and recover from my previous back up.
So I was wondering if this has happened to anyone else? I always fallow instructions and hardly ever have any problems but this was just odd. I felt like I had to solve riddles in order to get my phone working again.

See if you can boot to bootloader by means of ADB (adb reboot bootloader). If so reflash the stock rooted rom then reload CWM. You might need to Eng-S off if you have a corrupt file / bootloader? When done reflash CorDroid 5.0 (What I am running by the way)....

black htc screen
I tried to root my phone like an idiot because I dont know anything about this stuff and I got a black htc screen and i cant do anything. HELP!!

I see a lot of motivation in this and other threads to leave well-enough alone. Going to leave mine unrooted-stock.
I just had an excellent session of Google Nav where it performed exemplary. My phone does all I need and remains within the rules as the OEM wants it.

kadukasan said:
I tried to root my phone like an idiot because I dont know anything about this stuff and I got a black htc screen and i cant do anything. HELP!!
Click to expand...
Click to collapse
check out this thread --> http://forum.xda-developers.com/showthread.php?t=1019868

Help Please!

I unrooted my phone to return it to att and decided against returning it. I decided to reroot and get s-off again, which I did. I was trying to flash coredroid but every time I tried to get into recovery mode from ROM manager and everytime I did, the white HTC screen pops up and then fades away to a backlit, black screen. Now I cannot get my phone to power all the way up it just sticks on the whie HTC screen. Please help me!

Jake06 said:
I unrooted my phone to return it to att and decided against returning it. I decided to reroot and get s-off again, which I did. I was trying to flash coredroid but every time I tried to get into recovery mode from ROM manager and everytime I did, the white HTC screen pops up and then fades away to a backlit, black screen. Now I cannot get my phone to power all the way up it just sticks on the whie HTC screen. Please help me!
Click to expand...
Click to collapse
Maybe this will help?
http://forum.xda-developers.com/showthread.php?t=1019868

I am currently reflashing through hboot, thanks buddy! I will post results of this, lol.

Worked thanks!

Jake06 said:
Worked thanks!
Click to expand...
Click to collapse
Awesome!!!

And I also got CWM recovery to work as well, there was a fix for it on Bubby's Simple Root that i didn't even notice, I am now running CoreDroid v5.0!

[Q] G2x stuck at LG logo/cannot access recovery

Hey all
Before anyone mentions that i should be searching around more, i would like to say that i've been on multiple threads and they all state the same thing (use NVflash to flash CWM and then boot into CWM but the solution did not work for me past flashing CWM and then trying to access recovery after) and i wasn't able to find one that had a similar problem as mine.
I have CWM flashed through NVflash and was running CM7.1 RC1. I took a screenshot with the 'shootme' app and proceeded to look at the gallery to make sure it came out okay. The gallery crashed and i was sent to the home screen. I swiped to a different homescreen when my phone froze halfway through the transition to the next screen. No combination of buttons/long presses were able to get me out of it so i went ahead and did a battery pull. So my dilemma is that now i'm stuck at the LG boot logo with no blue status bar under it. It freezes there and will not do anything every time i boot up. volume down+power does not give me access to recovery nor does any other button combo get me past the LG boot logo.
Are there any other methods i might be able to use like ADB or what not to get myself out of this situation? or at least into recovery? Any comments or suggestions would be greatly appreciated as i've been searching for hours with little help and my eyes are starting to get strained.

hmmm.. I know it's a simple question, but I gotta ask.. are you holding the pwr and volume down button long enough? you have to keep holding it even after you see the LG screen.. Keep holding until you see the 2nd screen?
If so.. do the nvflash again? Edit: Not sure if I would do this without getting further guidance tho..

schmit said:
hmmm.. I know it's a simple question, but I gotta ask.. are you holding the pwr and volume down button long enough? you have to keep holding it even after you see the LG screen.. Keep holding until you see the 2nd screen?
Click to expand...
Click to collapse
This. I remember when I boot looped my phone I had the problem of letting go of the volume key too early, you need to hold down volume and power from a totally powered off phone until recovery actually starts and you see the green "android" logo of CWM.
Try re-flashing CWM, NVFlash CAN fail. There is literally nothing you can do within the OS that will prevent recovery from working. Either you did something wrong somewhere along the recovery process or you discovered an entirely new problem with the phone. I'm going to hazard a guess and say it's the former.

Thanks for the response guys. I wish that it was the case of not holding the buttons long enough. I have tried numerous times with the buttons held down for a long period of time. I even held the combo down for almost 5 minutes a few times.
Every time i try to boot up, it won't go past the LG boot screen so i would pull the battery out and go through flashing CWM through NVflash again. I'm sure I'm not missing anything because everything goes through and gets sent to the phone successfully.
I did happen to run into a thread that was closely similar to mine but his method was to just keep reflashing CWM and the stock recovery back and forth every time it failed until it turned on. I might have to try that if i cannot figure out this problem out soon. Not being able to use this phone is killing me! heh.

I just joined your club. Wow this sucks.

So apparently this is a whole new problem that's been found? Every other help thread seems to point to using NVflash or remaking the partitions due to a bad flash using an O2x based file instead of G2x.
But none of those solutions come close to doing anything. There has been some people with the same problem as me but aren't proactive at all enough to get someone's attention, so i'm guessing this problem is getting pushed to the side with people just going about getting their phones replaces/buying new ones.
I did happen to run into a thread on paulobrien/modaco's forum that had people using NVflash to get out of any sticky situation like this. It just reverts everything back to the stock factory settings but with root. We cannot use this though because he hasn't built it to be compatible with our LGP999's because everything was built for their UK LGP990's. Maybe that's a start to getting this solution fixed?

I hate to say this, bit you might have to call t mobile and get a replacement. Flash back to stock recovery and they won't know you messed with anything.
Sent from my Nexus 5g using XDA Ultimate App

Don't send back....you'll get same defacement a battery pull go into nvflah and go back stock then flash nv flash fix pArtitions

As I have mentioned before, NVflash does NOT give me access to my recovery let alone solve anything else. NVflash DOES work and does sucessfully send both CWM and the stock recovery but when I try to boot into either of them, let alone just power on normally, it simply DOES NOT go past the LG boot screen. it just hangs there doing nothing at all until I pull the battery out and do the same process over until it just hangs again.
while it is on/stuck at the LG screen, my computer does not recognize it so i cannot even try and run ADB commands. It does however, recognize it when I plug it in using the volume buttons held down when I use NVflash but there's nothing else I can do besides use NVflash obviously.

Jduhb said:
As I have mentioned before, NVflash does NOT give me access to my recovery let alone solve anything else. NVflash DOES work and does sucessfully send both CWM and the stock recovery but when I try to boot into either of them, let alone just power on normally, it simply DOES NOT go past the LG boot screen. it just hangs there doing nothing at all until I pull the battery out and do the same process over until it just hangs again.
while it is on/stuck at the LG screen, my computer does not recognize it so i cannot even try and run ADB commands. It does however, recognize it when I plug it in using the volume buttons held down when I use NVflash but there's nothing else I can do besides use NVflash obviously.
Click to expand...
Click to collapse
Did you ever find a solution to this issue? Because my phone is doing this...
I attempted to restore my phone back to the wrong backup that was from a galaxy sII (2.3.4 i think); needless to say, the restore failed. I then restarted my phone from CWM and it gets stuck at LG screen.
I have tried to NVflash back to stock; nothing. same thing reflashing back to CWM.
ideas?

have you tried this link out yet?
http://forum.xda-developers.com/showthread.php?t=1180331

same problem..... anybody find something to fix this yet?

From what I heard is that you need to remove the battery, then boot into recovery or something.
Sent from my G2X

Use smartflash for the p990 but only use the p999 ap.bin file which will put the rom and kernel back to stock p999.

Rom for recovery always fixes any soft brick back to stock 2.3.3 OTA. It's saved my phone multiple times from stuck on S/W screen to being stuck on lg logo or even the dreaded can't mount sdcard-cache errors in cwm.
Sent from my LG-P999 using xda premium

I used the following method when Clockworkmod became corrupted and was unable to mount my sd card. I had just wiped everything on my phone intending to install a new rom when the issue happened. I could not even get to the S/W upgrade screen. It saved my phone. Hope it works for you.
http://forum.xda-developers.com/showthread.php?p=17258229

jcbofkc said:
I used the following method when Clockworkmod became corrupted and was unable to mount my sd card. I had just wiped everything on my phone intending to install a new rom when the issue happened. I could not even get to the S/W upgrade screen. It saved my phone. Hope it works for you.
http://forum.xda-developers.com/showthread.php?p=17258229
Click to expand...
Click to collapse
omg thank you so much! It worked! Not only that but i was stuck on frodo 2.2.2 before which is why i was messing with my phone in the first place and now its on gingerbread. Awesome! thank you!!!!

sabotage99 said:
omg thank you so much! It worked! Not only that but i was stuck on frodo 2.2.2 before which is why i was messing with my phone in the first place and now its on gingerbread. Awesome! thank you!!!!
Click to expand...
Click to collapse
Glad for you that it worked.
Kwes1020 pointed me in the right direction last week. Be sure to give a thanks to ILUHA_89 who came up with the fix.

Amazing how people are soo lost without providing them link after link to other threads. They are soo lazy and can't follow simple directions, each time i get a new phone i go to that section on xda and soak up all the information as it usually is already there. It's just funny is all i guess.

d12unk13astard said:
Amazing how people are soo lost without providing them link after link to other threads. They are soo lazy and can't follow simple directions, each time i get a new phone i go to that section on xda and soak up all the information as it usually is already there. It's just funny is all i guess.
Click to expand...
Click to collapse
It's really not that big a deal. I was brand new to android once and asked all sorts of things.
I, like you, happen to read everything I can get my hands on. Some struggle going through all the info. I was here the day the forum opened, so I kind of remember where everything is.
Some are lazy and others just have no idea what the heck is going on and are intimidated by certain processes. I would rather help someone instead of listening to them ***** about their broken phone.

Solid amber light with no/long boot

I know this title comes up a lot but I can't seem to find my problem.
I wanted to go back to the stock rom and I used the proper RUU but totally forgot to use the S-ON tool before hand. It installed successfully but now I get a solid amber light and so far I got my inspire to boot once only to get stuck on the splash screen with it vibrating non-stop.
And now it just vibrated once, went to a black screen and then shut off. I really don't know what to do since I can't even get to HBOOT nor will the computer recognize it.
I've done numerous batter/sim card pulls as well as clean them out.
Any help would be greatly appreciated

Have you tried booting into the bootloader and doing a factory reset?
Sent from my Inspire 4G using XDA

I think he was referring to the bootloader as HBOOT. I had this problem while rooting my sisters Inspire. Might be a corrupted bootloader.
Sent from my Inspire 4G using xda premium

lay012 said:
I think he was referring to the bootloader as HBOOT. I had this problem while rooting my sisters Inspire. Might be a corrupted bootloader.
Sent from my Inspire 4G using xda premium
Click to expand...
Click to collapse
Last I remember my bootloader was TWRP which I guess I had accidentally installed somehow. If you think its a corrupted bootloader how would I go about solving this, if there is a solution?

moutansos said:
Have you tried booting into the bootloader and doing a factory reset?
Sent from my Inspire 4G using XDA
Click to expand...
Click to collapse
Never do a factory reset on a S-OFF device....it will jam u up.
greggyt79 said:
Last I remember my bootloader was TWRP which I guess I had accidentally installed somehow. If you think its a corrupted bootloader how would I go about solving this, if there is a solution?
Click to expand...
Click to collapse
It seems that the RUU you flashed was a Froyo one and your phone was running GB so you messed the bootloader. Hit the Hack Kit IRC channel (is in the OP thread) and we will lend u a hand to fix that....

Alright so I went to the IRC and they told me they couldn't help because it did not deal with the hack kit, fair enough.
I have been able to get the phone to boot after waiting for about 10 minutes but I cannot get to the bootloader. I tried rooting the phone again this way I can turn s-on then flash the stock rom again but the phone ends up not being detected half way through the process.
I really don't know what else to do...
Forgot to mention, now my inspire boots but then fades to a greyed out screen. My computer recognizes the phone as something occupying the usb port but is not accessible. Wish the phone had a physical reset button somewhere that i can poke with a paperclip...
Sent from my SAMSUNG-SGH-I897 using XDA

greggyt79 said:
Alright so I went to the IRC and they told me they couldn't help because it did not deal with the hack kit, fair enough.
I have been able to get the phone to boot after waiting for about 10 minutes but I cannot get to the bootloader. I tried rooting the phone again this way I can turn s-on then flash the stock rom again but the phone ends up not being detected half way through the process.
I really don't know what else to do...
Forgot to mention, now my inspire boots but then fades to a greyed out screen. My computer recognizes the phone as something occupying the usb port but is not accessible. Wish the phone had a physical reset button somewhere that i can poke with a paperclip...
Sent from my SAMSUNG-SGH-I897 using XDA
Click to expand...
Click to collapse
Greggyt, Hit the IRC Channel again,.....it was a rough day and we were a bit pissed. I just connected after you were gone....=0) just hit the channel again....

glevitan said:
Greggyt, Hit the IRC Channel again,.....it was a rough day and we were a bit pissed. I just connected after you were gone....=0) just hit the channel again....
Click to expand...
Click to collapse
I will get back on the IRC this evening when I get home from work thanks again!!!

Does it say anything about QHUSB_DLOAD USB device being connected?

I ran into a similar problem not too long ago, immediate vibrating followed by a solid amber light and no phone activity (nothing on the screen at all). I knew I had a backup in Recovery, but I couldn't even get into recovery.
In order to work around this, I did the following steps.
1. Deleted the PD98IMG file from my SD card (so I could get to recovery once I made it to the bootloader).
2. Take out the battery, then put it back in.
3. Plug in the phone, and let it sit for a few minutes.
4. Start into bootloader (hold power + Volume Down)
Now, in my case I was just trying to get back into recovery. if you don't have a working recovery, or no ROM to flash, you'll want to grab a few RUU 's to try from the bootloader. Try stock GB first, then try a stock Froyo just for the heck of it.
Hope this helps! Good luck to anyone else that's stumbled into this problem.
side note: I've also heard of this "power problem" occurring to other people without bootloops or screwed up bootloaders: which is solved by doing steps 2 and 3, then it'll boot up normally.

help
im having same issue i have gb stock and i accidtly did froyo ruu phones power bottun does nothing i have to plug it into computer and it will get solid amber light then eventually it either brings up battery charge icon and then if i press power button or unplug it. it just shuts off the i plug it back in and wait sometimes white htc screen comes up and it vibrates for a while then boots ad works like nothing is wrong but i cant flash gb ruu when i try to do that or re root and go to recovery to reistall ics that is on my sd as soon as phone restarts during process it doesnt reboot then i have to go threw whole procss of trying to get it to boot back up

glevitan said:
Never do a factory reset on a S-OFF device....it will jam u up.
It seems that the RUU you flashed was a Froyo one and your phone was running GB so you messed the bootloader. Hit the Hack Kit IRC channel (is in the OP thread) and we will lend u a hand to fix that....
Click to expand...
Click to collapse
im new to this site but i did exactly what you said in your post and now my inspire wont reboot unless i go threw a few hour process of plugin my phone in and i get solid amber light for like 5 min then a battery charge screen comes up then i have to unplug my phone and plug it back in the last time i did this it took about 8 hours of tryin until it finally got amber light for like 5 min then started vibrating for a min or 2 then it booted up and its bin workin fine for like a week now ive tried to reflash gingerbread ruu ive tried doin upgrade from my phone and tried reroot but as soon as it shuts down to start upgrade my phone is off and wont reboot

[Q] Possible brick? Need help fellas

So I goofed, pretty big this time.
I was running CM9 Alpha 5 and decided to take another shot at CleanRom, I read through the beginning instructions and saw it was a straight forward flash in recovery.
I however didn't see that if I was using CWM there would be some major issues.. HEEEE wasn't lying.
The phone bootloops only getting to the initial HTC screen, the loading bar doesn't even load up then power off then repeats. What's even stranger is it won't turn off unless I plug the usb cord in and fiddle with it for a few mins. I figure if I can get back into recovery all should be bueno. Just how might I do that? I've tried getting to recovery from the phone itself and tried hooking it up to a PC that will see the device, no such luck. It makes the notification on the PC that a usb has connected then makes the disconnect notification sound and cycles through that till I unplug it.
So is there any saving this thing? Or did I goof so hard its a paper weight?
tl:dr I flashed CleanRom in CWM without knowing that I shouldn't have used CWM. It's boot looping and I can't get it to enter recovery mode on adb. Am I screwed or is there something I can do?
Thanks so much guys, I can't believe I let myself think everything would be peachy when I flashed w/o reading EVERYTHING. Lesson learned.

Happened to me too. You have to relock your boot loader, download a stock RUU for your carrier and return to stock, reunlock then reroot and try it again with TWRP.
Sent from my HTC One X

danielsaenz said:
Happened to me too. You have to relock your boot loader, download a stock RUU for your carrier and return to stock, reunlock then reroot and try it again with TWRP.
Sent from my HTC One X
Click to expand...
Click to collapse
Worked like a charm man! Thanks so much!