Database Info

[Solved, read 3rd page] Failed CWM flash, problems...

Hi there! I will try to write about my problem as much as I can.
I'm on stock XWLA4 and CWM 4.0.0.2. I wanted to flash CWM 6.0.1.5 (and CM10 later) but when I push start in odin my laptop give me nice BSOD. Now my Android wont load. I see first screen with device name and later error - phone on the left, pc display on the right and yellow triangle betwen them. Under it a msg:
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
Click to expand...
Click to collapse
I can go into Recovery Mode (4.0.0.2) but don't know if it will work good.
When I enter into Download Mode im pressing Continue (Volume up) and I see green Android with "Downloading..." msg under it and next msg under it "Do not turn off target !!" just like usb cable was still plug in(?) but msg on the top of screen tell me its waiting for usb cable.
I tried flash CWM again on my PC (leptop BSOD-ing me all the time in this one case) when I push Start its stuck at:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
Click to expand...
Click to collapse
I read on web about one fix so I unplug usb cable and plug in, then it start to do smth and stuck at:
<ID:0/005> Removed!!
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
Click to expand...
Click to collapse
If I don't unplug and wait for long enought I get this:
<ID:0/003> Can't open the serial(COM) port.
Click to expand...
Click to collapse
Tried on few usb ports.
I was thinking at beginning about backup with current CWM but I think "Hey, its only CWM, not all rom", then BSOD from my laptop maybe ruin everything x). Hopefully I do a backup with current CWM version. Should I try flash CWM v6 via CWM? I saw version for that.
But guys, what can I do now?

Install kies in your system so that it will update the required drivers, Then flash the Stock ROM and after that you can flash CWM V4...
CM 10 can be flashed through CWM 4 also so no need to flash CWM V6...

Recently my phone also having similar problem.. upgrade from Stock 2.3.6 KK5 (with CWM 6.0.1.1) to latest Stock 4.0.4 XLP2.. then I wanted to load CWM..
so I downloaded 6.0.1.5.. stuck at the "<ID:0/005> Firmware update start... <ID:0/005> recovery.img..." for nearly 30 minutes nothing happened.. unplugged it..start again and "Please select recovery mode in Kies & try again" came out..
tried several files.. maybe my download was corrupted.. still having problem.. so I flash back stock ICS recovery via ODIN.. and tried CWM 6.0.1.1 and it works!!
I dont know why my phone could not install CWM 6.0.1.5

The are some problems with Odin-flashable CWMv6 and TWRP. Flash their zips with older versions.
Sent from my CM10-powered GT-I9103

Adam77Root said:
The are some problems with Odin-flashable CWMv6 and TWRP. Flash their zips with older versions.
Sent from my CM10-powered GT-I9103
Click to expand...
Click to collapse
Agree, I faced it too.Hey Adam the TWRP Mount Storage is also not working.

mj.vikram said:
Install kies in your system so that it will update the required drivers
Click to expand...
Click to collapse
Already done, in other case I could not connect my R to PC .
krobar77 said:
Recently my phone also having similar problem.. upgrade from Stock 2.3.6 KK5 (with CWM 6.0.1.1) to latest Stock 4.0.4 XLP2.. then I wanted to load CWM..
so I downloaded 6.0.1.5.. stuck at the "<ID:0/005> Firmware update start... <ID:0/005> recovery.img..." for nearly 30 minutes nothing happened.. unplugged it..start again and "Please select recovery mode in Kies & try again" came out..
tried several files.. maybe my download was corrupted.. still having problem.. so I flash back stock ICS recovery via ODIN.. and tried CWM 6.0.1.1 and it works!!
I dont know why my phone could not install CWM 6.0.1.5
Click to expand...
Click to collapse
Thx for the info . Could you provide the link to 6.0.1.1?
Adam77Root said:
The are some problems with Odin-flashable CWMv6 and TWRP. Flash their zips with older versions.
Click to expand...
Click to collapse
By older version you mean 6.0.1.1 for example or 5.*?

Rejwen said:
Already done, in other case I could not connect my R to PC .
Thx for the info . Could you provide the link to 6.0.1.1?
By older version you mean 6.0.1.1 for example or 5.*?
Click to expand...
Click to collapse
You can find the link here -> http://forum.xda-developers.com/showthread.php?t=1839900
Yes older means 6.0.1.1 or below its Version.

kataria.vikesh said:
You can find the link here -> http://forum.xda-developers.com/showthread.php?t=1839900
Yes older means 6.0.1.1 or below its Version.
Click to expand...
Click to collapse
Yes, saw that topic but can't find 6.0.1.1 . Or I will just try v5.5.0.4 (is it also creating some "blobs" file during backup?)
And is there any reason to use Odin v3.07? Using v1.85 atm.

Rejwen said:
Yes, saw that topic but can't find 6.0.1.1 . Or I will just try v5.5.0.4 (is it also creating some "blobs" file during backup?)
And is there any reason to use Odin v3.07? Using v1.85 atm.
Click to expand...
Click to collapse
I have it in My Dropbox. will update it here. But till then use V5.5.0.4. but i dont think so it has blobs for backup..

I tried to flash v5 and v4 but also stuck on recovery.img. Only this time a green bar of process move just a little at beginning. "SOS" msg in first square under "Android+SLP" is meaning smth?
And still when I go into Download Mode I see msg:
"Downloading...
Do not turn off target !!"
Click to expand...
Click to collapse
Is this a right thing if I didn't plug cable yet?
How can I try to fix it in another way? Or only what I can try is flash stock rom and then flash again CWM? But I dont know if my CWM backup I have done yesterday will work now. What if I recover backup later and this situation happen again?

Is it possible for our Royal delete and install CWM via adb console?

here you go bro.. sorry for late reply..
1) CWM 6.0.1.1 ODIN - http://www.general-files.com/download/gs5d642b2ehdi0/CWMv6.0.1.1_ODIN.tar.html
2) CWM 6.0.1.1 ODIN Touch - http://www.general-files.com/download/gs5d6418afhdi0/CWMv6.0.1.1_TOUCH_ODIN.tar.html
3) CWM 6.0.1.1 CWM Flashable - http://www.general-files.com/download/gs5d6422f1hdi0/CWMv6.0.1.1_CWM.zip.html
4) CWM 6.0.1.1 Touch CWM Flashable - http://www.general-files.com/download/gs5d642b09hdi0/CWMv6.0.1.1_TOUCH_CWM.zip.html

krobar77 said:
here you go bro.. sorry for late reply..
1) CWM 6.0.1.1 ODIN - http://www.general-files.com/download/gs5d642b2ehdi0/CWMv6.0.1.1_ODIN.tar.html
2) CWM 6.0.1.1 ODIN Touch - http://www.general-files.com/download/gs5d6418afhdi0/CWMv6.0.1.1_TOUCH_ODIN.tar.html
3) CWM 6.0.1.1 CWM Flashable - http://www.general-files.com/download/gs5d6422f1hdi0/CWMv6.0.1.1_CWM.zip.html
4) CWM 6.0.1.1 Touch CWM Flashable - http://www.general-files.com/download/gs5d642b09hdi0/CWMv6.0.1.1_TOUCH_CWM.zip.html
Click to expand...
Click to collapse
Great buddy. This link is not available in Adam thread. Ask him to add this one also.

Ok guys, I flash stock XWLA4 and its working . I didn't do any reset/format so could I use rom just like that again? I mean apps would be working good? Now if I want to use Titanum Bacup for some apps, everything gonna be ok later after flash another rom and I restore them from TB? Or install them in normal way and I restore only app's data?
I thought CWM is a separated thing from ROM Oo. I was wondering is it gonna work when I flash rom but not CWM .

Rejwen said:
Ok guys, I flash stock XWLA4 and its working . I didn't do any reset/format so could I use rom just like that again? I mean apps would be working good? Now if I want to use Titanum Bacup for some apps, everything gonna be ok later after flash another rom and I restore them from TB? Or install them in normal way and I restore only app's data?
I thought CWM is a separated thing from ROM Oo. I was wondering is it gonna work when I flash rom but not CWM .
Click to expand...
Click to collapse
Great. BTW Have listen about this tool -> [TOOL] APK Batch Installer

Thx for this . But can I chech what apps I want to backup? I need only few (data) + some games (also data) so I think my TB will be enought . Rest of apps I will install from market. I don't have any apk on my hdd anyway .

Rejwen said:
Thx for this . But can I chech what apps I want to backup? I need only few (data) + some games (also data) so I think my TB will be enought . Rest of apps I will install from market. I don't have any apk on my hdd anyway .
Click to expand...
Click to collapse
The apk tool backs up all the apps but gives you a choice which apk to restore.. It creates an apk of all the installed apps so that you don't have to download and reinstall all apps
From my CM10.1 powered galaxy R

One more question before I try to do smth more like flash CM10 and CWM v6. Is there any reason to use Odin v3.07? Using v1.85 atm.

Rejwen said:
One more question before I try to do smth more like flash CM10 and CWM v6. Is there any reason to use Odin v3.07? Using v1.85 atm.
Click to expand...
Click to collapse
You cannot flash ICS roms with v1.85. Must use v3.07 for those.

Adam77Root said:
You cannot flash ICS roms with v1.85. Must use v3.07 for those.
Click to expand...
Click to collapse
Well it actually works but its risky, sometime gets stuck in between. Happened with me.
Sent from my GT-I9103 using xda app-developers app

[Q] I9103r doesnt want Rooted in Odin?Please Help

I have a big problem with Rooting my Samsung via ODIN. I'm using difirent version of odin -started v.1.85 up to 3.07 and in all i have the same problem. The information when I started to root ma samsung is like this below:
<ID:0/027> File analysis..
<ID:0/027> SetupConnection..
<ID:0/027> Initialzation..
<ID:0/027> Get PIT for mapping..
<ID:0/027> Firmware update start..
<ID:0/027> recovery.img
<ID:0/027> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and the status in left upper window is of course FAILED
I'm using the 4.04 android version I9103XXLQ3.
I'm using Windows 7 64 bit in my computer.
If I understand correctly, when I want to upload new version of ROM like avatar rom, at first i must root my phone using Odin, and then it possible to upload the new Avatar 4.2.2 rom by the recovery mode from the sdcard.
There is a streng situation after I try to root my phone via odin and have the information like few lines above, when i tray to start my phone then I have the information in ma screen like this below whith the yellow triangle "exclamation".
Firmware upgrade encountered an issue.
Please select recovery mode in Kies and try again.
Can anybody could give me some advices how to fix this problem. I will be very appreciate
Thanks and sorry for my english at all

I9103-junior said:
I have a big problem with Rooting my Samsung via ODIN. I'm using difirent version of odin -started v.1.85 up to 3.07 and in all i have the same problem. The information when I started to root ma samsung is like this below:
<ID:0/027> File analysis..
<ID:0/027> SetupConnection..
<ID:0/027> Initialzation..
<ID:0/027> Get PIT for mapping..
<ID:0/027> Firmware update start..
<ID:0/027> recovery.img
<ID:0/027> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and the status in left upper window is of course FAILED
I'm using the 4.04 android version I9103XXLQ3.
I'm using Windows 7 64 bit in my computer.
If I understand correctly, when I want to upload new version of ROM like avatar rom, at first i must root my phone using Odin, and then it possible to upload the new Avatar 4.2.2 rom by the recovery mode from the sdcard.
There is a streng situation after I try to root my phone via odin and have the information like few lines above, when i tray to start my phone then I have the information in ma screen like this below whith the yellow triangle "exclamation".
Firmware upgrade encountered an issue.
Please select recovery mode in Kies and try again.
Can anybody could give me some advices how to fix this problem. I will be very appreciate
Thanks and sorry for my english at all
Click to expand...
Click to collapse
check whether Kies is running in background?
close it. also u must follow soft brick tutorial.
Thanks,
Disturbed™
Sent from my Disturbed™ Galaxy S4 using Tapatalk (VIP)
______________________________________________________
Wait for my time, U gonna pay for what U have done. - Disturbed™

Could you post Odin screen shot with all details how you are flashing...
Sent from my Nexus 4 using Tapatalk 2

screen shot from Odin
Hi
I attach an image from Odin. Any other suggestions welcomed.
Thanks
Peter

Disturbed™ said:
check whether Kies is running in background?
close it. also u must follow soft brick tutorial.
Thanks,
Disturbed™
Sent from my Disturbed™ Galaxy S4 using Tapatalk (VIP)
______________________________________________________
Wait for my time, U gonna pay for what U have done. - Disturbed™
Click to expand...
Click to collapse
Hi
I removed the Kies from Windows, because it seemed to me that it can cause conflict when I''m starting flash my phone.But unfortunately, problem is the same.
Where I can find "follow soft brick tutorial". and what is it used for.
Thanks at all

If you are facing problems with v6.0.3.2, download tar file of CWM v4.0.0.2 from here and try flashing it.
by flashing CWM you are flashing custom recovery and doing so will not root your phone!
you need to flash superuser.zip or flash ardatdat's kernel to root.

Nikhil said:
If you are facing problems with v6.0.3.2, download tar file of CWM v4.0.0.2 from here and try flashing it.
by flashing CWM you are flashing custom recovery and doing so will not root your phone!
you need to flash superuser.zip or flash ardatdat's kernel to root.
Click to expand...
Click to collapse
what a catch. we must have reading habits.
Thanks,
Disturbed™
Sent from my Disturbed™ Galaxy S4 using XDA Premium 4
______________________________________________________
Wait for my time, U gonna pay for what U have done. - Disturbed™

Nikhil said:
If you are facing problems with v6.0.3.2, download tar file of CWM v4.0.0.2 from here and try flashing it.
by flashing CWM you are flashing custom recovery and doing so will not root your phone!
you need to flash superuser.zip or flash ardatdat's kernel to root.
Click to expand...
Click to collapse
Hi, thanks a lot - solution with cwm ver.4.0.0.2 turned out to be the right way.I managed to upload to my phone this version of cwm but I wondering if this is only ver. that will by works on my i9103r?. Anyway now I am trying to upload new unofficial ROM and one question about that. Where can I find a instruction how to deal with this operation I now only that this is doing from the download mode using cwm. But that's all. Thanks in advance:good:

I9103-junior said:
Hi, thanks a lot - solution with cwm ver.4.0.0.2 turned out to be the right way.I managed to upload to my phone this version of cwm but I wondering if this is only ver. that will by works on my i9103r?.
Click to expand...
Click to collapse
No you can flash different versions also. Since you installed CWM v4.0.0.2, now onwards download flashable zip file of other recoveries and flash them.
Anyway now I am trying to upload new unofficial ROM and one question about that. Where can I find a instruction how to deal with this operation I now only that this is doing from the download mode using cwm. But that's all. Thanks in advance:good:
Click to expand...
Click to collapse
Visit [INDEX] Custom ROM/Kernel/MOD/Guide/Tool
links to various Roms are given there and instructions are given in respective Rom's OP.
Happy Flashing..

[Q] status 7 error samsung galax ace plus..please help

I rooted my ace plus phone and trying to put CyanogenMod 10.1 and I m stuck with this error 7.
I tryed to change cwm and delete few lines from rom that are related with checking compatibility but with no success.

ddfacto said:
I rooted my ace plus phone and trying to put CyanogenMod 10.1 and I m stuck with this error 7.
I tryed to change cwm and delete few lines from rom that are related with checking compatibility but with no success.
Click to expand...
Click to collapse
[GUIDE] status 7 error while flashing rom cwm xda (noob friendly)
or
you can re-download the rom and after downloading match the check sum
or
you can try twrp recovery
link is in my signature

vickyg.coolest said:
[GUIDE] status 7 error while flashing rom cwm xda (noob friendly)
or
you can re-download the rom and after downloading match the check sum
or
you can try twrp recovery
link is in my signature
Click to expand...
Click to collapse
I tryed to re-download the rom few times...I ll try with twrp now...btw...do u thing its smart to update my phone to JB?
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MD5 hash value is invalid
<OSM> twrp-build-3-06052013-trebon.tar.md5 is invalid.
<OSM> End...

ddfacto said:
I tryed to re-download the rom few times...I ll try with twrp now...btw...do u thing its smart to update my phone to JB?
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MD5 hash value is invalid
<OSM> twrp-build-3-06052013-trebon.tar.md5 is invalid.
<OSM> End...
Click to expand...
Click to collapse
again you have a corrupted file of twrp
you should use idm to download twrp
because twrp is working for everyone
and of course it is smart to update to jb if you dont use camera much

vickyg.coolest said:
again you have a corrupted file of twrp
you should use idm to download twrp
because twrp is working for everyone
and of course it is smart to update to jb if you dont use camera much
Click to expand...
Click to collapse
try cwm 5.5

vickyg.coolest said:
again you have a corrupted file of twrp
you should use idm to download twrp
because twrp is working for everyone
and of course it is smart to update to jb if you dont use camera much
Click to expand...
Click to collapse
that part is working but now I m stack on boot loop :/

wipe data in cmw after flash cm10.1
good luck

ddfacto said:
that part is working but now I m stack on boot loop :/
Click to expand...
Click to collapse
for bootloop you should wipe data wipe system and wipe evrythng except sd card
then flash cm 10.1 or whatever rom you want:thumbup:
Sent from my GT-S7500 using Tapatalk 2

Stuck on boot, can't flash stock firmware

Hey guys, I got my Galaxy S6 SM-G920I a few weeks ago and I've enjoyed everything about it, but as usual I have the need to try custom ROMs .
Anyway as usual I don't do lot of research (I'm stupid I guess), so first I flash CF-Auto-Root via Odin and... surprise phone is stuck on boot logo, so I don't panic too much , I install TWRP via Odin and everything is ok, then I download a stock firmware 3483.1 MB and try to flash it via odin but oh surprise, it fails, on the phone screen say
SW REV. CHECK FAIL. DEVICE: 2 BINARY: 1
Click to expand...
Click to collapse
and on odin
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
so right now I'm pretty desperate, I'm searching but I can't find a solution , I have hope that this has a solution so I will love you so much if you can help me.
It's a SM-G920I

dextroit said:
Hey guys, I got my Galaxy S6 SM-G920I a few weeks ago and I've enjoyed everything about it, but as usual I have the need to try custom ROMs .
Anyway as usual I don't do lot of research (I'm stupid I guess), so first I flash CF-Auto-Root via Odin and... surprise phone is stuck on boot logo, so I don't panic too much , I install TWRP via Odin and everything is ok, then I download a stock firmware 3483.1 MB and try to flash it via odin but oh surprise, it fails, on the phone screen say and on odin
so right now I'm pretty desperate, I'm searching but I can't find a solution , I have hope that this has a solution so I will love you so much if you can help me.
It's a SM-G920I
Click to expand...
Click to collapse
As it seems you have downloaded it an older firmware than you have flashed. That's why it gives you an error. You should flash the latest!!

t-shock said:
As it seems you have downloaded it an older firmware than you have flashed. That's why it gives you an error. You should flash the latest!!
Click to expand...
Click to collapse
Ok so I downloaded the latest firmware I believe from Sammobile it took me 4 hrs... and when I try to flash it with Odin 3.10.7 it says
"Get PIT for mapping"
Click to expand...
Click to collapse
and it gets stuck on that step...
any idea what else I can do?

dextroit said:
Ok so I downloaded the latest firmware I believe from Sammobile it took me 4 hrs... and when I try to flash it with Odin 3.10.7 it says
and it gets stuck on that step...
any idea what else I can do?
Click to expand...
Click to collapse
Find a pit for your pc and click re-partition

t-shock said:
Find a pit for your pc and click re-partition
Click to expand...
Click to collapse
Sorry to keep bothering you , and thank you for you'r help so far... I can't find this PIT file I read that is in the .md5 file? Really no idea, i prefer to ask instead of screwing up again.

Same problem, but I can't flash stock ever again, I can only flash custom roms, but try flashing twrp recovery and flash a rom to see if you partition is corrupted,

dextroit said:
Sorry to keep bothering you , and thank you for you'r help so far... I can't find this PIT file I read that is in the .md5 file? Really no idea, i prefer to ask instead of screwing up again.
Click to expand...
Click to collapse
Use one from the G920F

Just upgrade to latest modem and bootloader for your model via odin. Also flash TWRP. Install a custom rom and you should be ok

shotgun10ga said:
Same problem, but I can't flash stock ever again, I can only flash custom roms, but try flashing twrp recovery and flash a rom to see if you partition is corrupted,
Click to expand...
Click to collapse
I have TWRP but how can I install a custom ROM? I mean is there someway to pass the zip file to the phone bricked?

t-shock said:
Use one from the G920F
Click to expand...
Click to collapse
Ok so i found a few but it has a warning
warning : pit can brick your dévice,so use it only if you need and with modération
Click to expand...
Click to collapse
Uh so I'll wait for you answer but my question is I'll use ZEROFLTE_EUR_OPEN.pit : hidden (2560) 10 240KB cache: (51200) 204 800KB from this post http://forum.xda-developers.com/galaxy-s6/general/g920f-pit-file-banded-firmwares-t3118459 is that ok for my device, do I need to flash the PIT first and then the stock firmware or both.

bahmonkeys said:
Just upgrade to latest modem and bootloader for your model via odin. Also flash TWRP. Install a custom rom and you should be ok
Click to expand...
Click to collapse
Ok so after flashing the modem and the bootloader I'll be able to transfer the custom rom to the memory phone? or how do I do it
Thanks all of you guys for your help

I think I am in the same boot, I've tried flashing the stock rom at least 8 times with no luck even it says it passed, I even flashed modem and bootloader with with stock rom,

I don't have the files anymore. But what I had to do was this:
Download the latest Stock from Sammobile for your phone. Make sure it's the latest, that will give you the latest Modem and Bootloader.
With Odin (right click and Run as superuser), flash the Stock.
Also then Flash TWRP.
I would search in Youtube, I think I had found videos of people doing what I'm suggesting. Hope you can fix it!

gaston_garcia said:
I don't have the files anymore. But what I had to do was this:
Download the latest Stock from Sammobile for your phone. Make sure it's the latest, that will give you the latest Modem and Bootloader.
With Odin (right click and Run as superuser), flash the Stock.
Also then Flash TWRP.
I would search in Youtube, I think I had found videos of people doing what I'm suggesting. Hope you can fix it!
Click to expand...
Click to collapse
I downloade the latest firmware but can't flash it because asks for the PIT file, no idea really.

dextroit said:
I downloade the latest firmware but can't flash it because asks for the PIT file, no idea really.
Click to expand...
Click to collapse
****. I don't know what that is.
Check youtube, it's really full of excellent help videos.

dextroit said:
Ok so i found a few but it has a warning
Uh so I'll wait for you answer but my question is I'll use ZEROFLTE_EUR_OPEN.pit : hidden (2560) 10 240KB cache: (51200) 204 800KB from this post http://forum.xda-developers.com/galaxy-s6/general/g920f-pit-file-banded-firmwares-t3118459 is that ok for my device, do I need to flash the PIT first and then the stock firmware or both.
Click to expand...
Click to collapse
Although it IS NOT recommended to use pit files, give it a shot. If your phone is already kinda bricked then you won't loose anything at the trying!
I recommend this firmware and that pit
I'm not responsible your your device is completely destroyed after this. At the odin don't use re-partition

t-shock said:
Although it IS NOT recommended to use pit files, give it a shot. If your phone is already kinda bricked then you won't loose anything at the trying!
I recommend this firmware and that pit
I'm not responsible your your device is completely destroyed after this. At the odin don't use re-partition
Click to expand...
Click to collapse
RIP...
Ok so I place the firmware on AP and the PIT file on Pit then I hit start but Odin still says
<ID:0/007> Get PIT for mapping..
Click to expand...
Click to collapse
:crying: I am really confused now.

dextroit said:
RIP...
Ok so I place the firmware on AP and the PIT file on Pit then I hit start but Odin still says
:crying: I am really confused now.
Click to expand...
Click to collapse
Try without pit

dextroit said:
Hey guys, I got my Galaxy S6 SM-G920I a few weeks ago and I've enjoyed everything about it, but as usual I have the need to try custom ROMs .
Anyway as usual I don't do lot of research (I'm stupid I guess), so first I flash CF-Auto-Root via Odin and... surprise phone is stuck on boot logo, so I don't panic too much , I install TWRP via Odin and everything is ok, then I download a stock firmware 3483.1 MB and try to flash it via odin but oh surprise, it fails, on the phone screen say and on odin
so right now I'm pretty desperate, I'm searching but I can't find a solution , I have hope that this has a solution so I will love you so much if you can help me.
It's a SM-G920I
Click to expand...
Click to collapse
I had the EXACT same problem happen to me yesterday, and it was just to do with the rom I downloaded. I downloaded the new rom from this link ( http://forum.youmobile.org/downloads/?sa=view&down=4400 ) and flashed using odin, and it worked perfectly.

t-shock said:
Try without pit
Click to expand...
Click to collapse
and with PIT is the same stuff
emcardle660 said:
I had the EXACT same problem happen to me yesterday, and it was just to do with the rom I downloaded. I downloaded the new rom from this link ( http://forum.youmobile.org/downloads/?sa=view&down=4400 ) and flashed using odin, and it worked perfectly.
Click to expand...
Click to collapse
Hmm but thats for the 920F should I flash that to my phone?

Help please

I wanted to install the stock firmware on my galaxy j7 but when I try to flash it with odin I get this error:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplag the cable..
<OSM> Please wait..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialization..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> cm.bim
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can you please help me?
The model is j710fn (2016)

@r4d0n7 have you verified hash of md5 to be sure it didn't get corrupted during download.. you could try removing the ".md5" so it's just a ".tar" an extract with winrar or 7zip to see if any errors occur you can try flashing without the ".md5" also just flash the tar file otherwise it could be corrupted make sure you download from a reliable source.. use a download manager also. Maybe your partitions got jacked up over time and there not matching when verifying may have to flash a .pit file also
Sent from my LGLS676 using Tapatalk

rick.wardenburg said:
@r4d0n7 have you verified hash of md5 to be sure it didn't get corrupted during download.. you could try removing the ".md5" so it's just a ".tar" an extract with winrar or 7zip to see if any errors occur you can try flashing without the ".md5"
Click to expand...
Click to collapse
Well, I tried what you said so: renaming the .md5 into .tar or just removing the .md5 and letting only .tar. Still I get the same result and on my downloading mode console in my phone I'm getting: SECURE CHECK FAIL: (BOOTLOADER) I tried different firmwares to download... Same result. I tried flashing a custom recovery and it works. This means it's not anything from the drivers.
rick.wardenburg said:
also just flash the tar file otherwise it could be corrupted make sure you download from a reliable source.. use a download manager also. Maybe your partitions got jacked up over time and there not matching when verifying may have to flash a .pit file also.
Click to expand...
Click to collapse
I downloaded the last .tar version from samsung-firmwares.org for j710fn but still no fix... I'm sure it may be from my partitions. If it is, then tell me how can i fix them up?

That's not good I'm sure it means it failed to verify using pit, when you have phone plugged in USB and on download mode go to your device manager screen in windows and check that your name of phone shows up correct, flashing a rom not ment for your device could of caused this by experience
---------- Post added at 10:13 AM ---------- Previous post was at 09:55 AM ----------
Try loading the firmware in all 4 slots of Odin and flashing, you could always extract the tar and make the 4 file flash seems to work a lot also you can get your PIT from twrp by typing in twrp terminal
Code:
dd if=/dev/block/mmcblk0 of=/sdcard/out.pit bs=8 count=580 skip=2176
flash with stock rom if it throws an error about ext4 you'll have to get a PIT from someone with same device an storage capacity
Sent from my LGLS676 using Tapatalk

rick.wardenburg said:
That's not good I'm sure it means it failed to verify using pit, when you have phone plugged in USB and on download mode go to your device manager screen in windows and check that your name of phone shows up correct, flashing a rom not ment for your device could of caused this by experience
Click to expand...
Click to collapse
Well, I saw different baseband versions for each firmware. I don't know how can I find my baseband version if my OS is wiped and can't check whatever information needed for it so I can get the correct firmware for it.

rick.wardenburg said:
That's not good I'm sure it means it failed to verify using pit, when you have phone plugged in USB and on download mode go to your device manager screen in windows and check that your name of phone shows up correct, flashing a rom not ment for your device could of caused this by experience
---------- Post added at 10:13 AM ---------- Previous post was at 09:55 AM ----------
Try loading the firmware in all 4 slots of Odin and flashing, you could always extract the tar and make the 4 file flash seems to work a lot also you can get your PIT from twrp by typing in twrp terminal
Code:
dd if=/dev/block/mmcblk0 of=/sdcard/out.pit bs=8 count=580 skip=2176
flash with stock rom if it throws an error about ext4 you'll have to get a PIT from someone with same device an storage capacity
Sent from my LGLS676 using Tapatalk
Click to expand...
Click to collapse
Nope buddy its not device issue he is downloading wrong firmwares
Dont use sammobile
Its mixed all
Just move to updato.com
And install its firmware
U will pass odin all

Oves786 said:
Nope buddy its not device issue he is downloading wrong firmwares
Dont use sammobile
Its mixed all
Just move to updato.com
And install its firmware
U will pass odin all
Click to expand...
Click to collapse
I'm assuming he has right firmware flashing some ROMs and then Odin factory firmware will cause this also
Sent from my LGLS676 using Tapatalk

rick.wardenburg said:
I'm assuming he has right firmware flashing some ROMs and then Odin factory firmware will cause this also
Sent from my LGLS676 using Tapatalk
Click to expand...
Click to collapse
nope he downloaded the j710fn firmware from sammobile and samshung has 2 models named j710fn like on8 and j7 2016 so the firmwares are mixed on sammobie an the on8 firmware says cm.bin fail on j7 2016
and updato.co firmware works on j7 2016 so firmware is the issue
i also hadthat issue i too hav j7 2016

Well, thank you everybody for trying to help me out but I already got a custom rom in which works with the phone really nice, and sorry for bumping the topic.